[Alignment][NFC] Use Align in MCStreamer::emitCodeAlignment

[gchatelet]

Summary

This patch makes code less readable but it will clean itself after all functions are converted.

bolt/include/bolt/Core/BinaryBasicBlock.h

public:
 
   /// Set alignment of the block based on the alignment of its offset.
   void setDerivedAlignment() {
     const uint64_t DerivedAlignment = getOffset() & (1 + ~getOffset());
     Alignment = std::min(DerivedAlignment, uint64_t(32));
   }
 
   /// Return required alignment for the block.
+  Align getAlign() const { return Align(Alignment); }
   uint32_t getAlignment() const { return Alignment; }
 
   /// Set the maximum number of bytes to use for the block alignment.
   void setAlignmentMaxBytes(uint32_t Value) { AlignmentMaxBytes = Value; }
 
   /// Return the maximum number of bytes to use for the block alignment.
   uint32_t getAlignmentMaxBytes() const { return AlignmentMaxBytes; }
 

bolt/include/bolt/Core/BinaryFunction.h

BinaryFunction &setPersonalityEncoding(uint8_t Encoding) {
     return *this;
   }
 
   BinaryFunction &setAlignment(uint16_t Align) {
     Alignment = Align;
     return *this;
   }
 
+  Align getAlign() const { return Align(Alignment); }
   uint16_t getAlignment() const { return Alignment; }
 
   BinaryFunction &setMaxAlignmentBytes(uint16_t MaxAlignBytes) {
     MaxAlignmentBytes = MaxAlignBytes;
     return *this;
   }
 
   uint16_t getMaxAlignmentBytes() const { return MaxAlignmentBytes; }

bolt/lib/Core/BinaryEmitter.cpp

bool BinaryEmitter::emitFunction(BinaryFunction &Function,
 
   if (BC.HasRelocations) {
     // Set section alignment to at least maximum possible object alignment.
     // We need this to support LongJmp and other passes that calculates
     // tentative layout.
     if (Section->getAlign() < opts::AlignFunctions)
       Section->setAlignment(Align(opts::AlignFunctions));
 
-    Streamer.emitCodeAlignment(BinaryFunction::MinAlign, &*BC.STI);
+    Streamer.emitCodeAlignment(Align(BinaryFunction::MinAlign), &*BC.STI);
     uint16_t MaxAlignBytes = FF.isSplitFragment()
                                  ? Function.getMaxColdAlignmentBytes()
                                  : Function.getMaxAlignmentBytes();
     if (MaxAlignBytes > 0)
-      Streamer.emitCodeAlignment(Function.getAlignment(), &*BC.STI,
-                                 MaxAlignBytes);
+      Streamer.emitCodeAlignment(Function.getAlign(), &*BC.STI, MaxAlignBytes);
   } else {
-    Streamer.emitCodeAlignment(Function.getAlignment(), &*BC.STI);
+    Streamer.emitCodeAlignment(Function.getAlign(), &*BC.STI);
   }
 
   MCContext &Context = Streamer.getContext();
   const MCAsmInfo *MAI = Context.getAsmInfo();
 
   MCSymbol *const StartSymbol = Function.getSymbol(FF.getFragmentNum());
 
   // Emit all symbols associated with the main function entry.
if (!FF.empty() && FF.front()->isLandingPad()) {
     Streamer.emitIntValue(BC.MIB->getTrapFillValue(), 1);
   }
 
   // Track the first emitted instruction with debug info.
   bool FirstInstr = true;
   for (BinaryBasicBlock *const BB : FF) {
     if ((opts::AlignBlocks || opts::PreserveBlocksAlignment) &&
         BB->getAlignment() > 1)
-      Streamer.emitCodeAlignment(BB->getAlignment(), &*BC.STI,
+      Streamer.emitCodeAlignment(BB->getAlign(), &*BC.STI,
                                  BB->getAlignmentMaxBytes());
     Streamer.emitLabel(BB->getLabel());
     if (!EmitCodeOnly) {
       if (MCSymbol *EntrySymbol = BF.getSecondaryEntryPointSymbol(*BB))
         Streamer.emitLabel(EntrySymbol);
     }
 
     // Check if special alignment for macro-fusion is needed.
void BinaryEmitter::emitConstantIslands(BinaryFunction &BF, bool EmitColdPart,
   if (Islands.DataOffsets.empty() && Islands.Dependency.empty())
     return;
 
   // AArch64 requires CI to be aligned to 8 bytes due to access instructions
   // restrictions. E.g. the ldr with imm, where imm must be aligned to 8 bytes.
   const uint16_t Alignment = OnBehalfOf
                                  ? OnBehalfOf->getConstantIslandAlignment()
                                  : BF.getConstantIslandAlignment();
-  Streamer.emitCodeAlignment(Alignment, &*BC.STI);
+  Streamer.emitCodeAlignment(Align(Alignment), &*BC.STI);
 
   if (!OnBehalfOf) {
     if (!EmitColdPart)
       Streamer.emitLabel(BF.getFunctionConstantIslandLabel());
     else
       Streamer.emitLabel(BF.getFunctionColdConstantIslandLabel());
   }
 

llvm/include/llvm/MC/MCObjectStreamer.h

public:
 
   void emitBundleAlignMode(Align Alignment) override;
   void emitBundleLock(bool AlignToEnd) override;
   void emitBundleUnlock() override;
   void emitBytes(StringRef Data) override;
   void emitValueToAlignment(unsigned ByteAlignment, int64_t Value = 0,
                             unsigned ValueSize = 1,
                             unsigned MaxBytesToEmit = 0) override;
-  void emitCodeAlignment(unsigned ByteAlignment, const MCSubtargetInfo *STI,
+  void emitCodeAlignment(Align ByteAlignment, const MCSubtargetInfo *STI,
                          unsigned MaxBytesToEmit = 0) override;
   void emitValueToOffset(const MCExpr *Offset, unsigned char Value,
                          SMLoc Loc) override;
   void emitDwarfLocDirective(unsigned FileNo, unsigned Line, unsigned Column,
                              unsigned Flags, unsigned Isa,
                              unsigned Discriminator,
                              StringRef FileName) override;
   void emitDwarfAdvanceLineAddr(int64_t LineDelta, const MCSymbol *LastLabel,

llvm/include/llvm/MC/MCStreamer.h

virtual void emitValueToAlignment(unsigned ByteAlignment, int64_t Value = 0,
                                     unsigned ValueSize = 1,
                                     unsigned MaxBytesToEmit = 0);
 
   /// Emit nops until the byte alignment \p ByteAlignment is reached.
   ///
   /// This used to align code where the alignment bytes may be executed.  This
   /// can emit different bytes for different sizes to optimize execution.
   ///
-  /// \param ByteAlignment - The alignment to reach. This must be a power of
-  /// two on some targets.
+  /// \param Alignment - The alignment to reach.
   /// \param STI - The MCSubtargetInfo in operation when padding is emitted.
   /// \param MaxBytesToEmit - The maximum numbers of bytes to emit, or 0. If
   /// the alignment cannot be reached in this many bytes, no bytes are
   /// emitted.
-  virtual void emitCodeAlignment(unsigned ByteAlignment,
-                                 const MCSubtargetInfo *STI,
+  virtual void emitCodeAlignment(Align Alignment, const MCSubtargetInfo *STI,
                                  unsigned MaxBytesToEmit = 0);
 
   /// Emit some number of copies of \p Value until the byte offset \p
   /// Offset is reached.
   ///
   /// This is used to implement assembler directives such as .org.
   ///
   /// \param Offset - The offset to reach. This may be an expression, but the

llvm/lib/CodeGen/AsmPrinter/AsmPrinter.cpp

if (Alignment == Align(1))
     return; // 1-byte aligned: no need to emit alignment.
 
   if (getCurrentSection()->getKind().isText()) {
     const MCSubtargetInfo *STI = nullptr;
     if (this->MF)
       STI = &getSubtargetInfo();
     else
       STI = TM.getMCSubtargetInfo();
-    OutStreamer->emitCodeAlignment(Alignment.value(), STI, MaxBytesToEmit);
+    OutStreamer->emitCodeAlignment(Alignment, STI, MaxBytesToEmit);
   } else
     OutStreamer->emitValueToAlignment(Alignment.value(), 0, 1, MaxBytesToEmit);
 }
 
 //===----------------------------------------------------------------------===//
 // Constant emission.
 //===----------------------------------------------------------------------===//
 
void AsmPrinter::emitXRayTable() {
   OutStreamer->emitLabel(SledsEnd);
 
   // We then emit a single entry in the index per function. We use the symbols
   // that bound the instrumentation map as the range for a specific function.
   // Each entry here will be 2 * word size aligned, as we're writing down two
   // pointers. This should work for both 32-bit and 64-bit platforms.
   if (FnSledIndex) {
     OutStreamer->switchSection(FnSledIndex);
-    OutStreamer->emitCodeAlignment(2 * WordSizeBytes, &getSubtargetInfo());
+    OutStreamer->emitCodeAlignment(Align(2 * WordSizeBytes),
+                                   &getSubtargetInfo());
     OutStreamer->emitSymbolValue(SledsStart, WordSizeBytes, false);
     OutStreamer->emitSymbolValue(SledsEnd, WordSizeBytes, false);
     OutStreamer->switchSection(PrevSection);
   }
   Sleds.clear();
 }
 
 void AsmPrinter::recordSled(MCSymbol *Sled, const MachineInstr &MI,

llvm/lib/MC/MCAsmStreamer.cpp

public:
 
   void emitAlignmentDirective(unsigned ByteAlignment, Optional<int64_t> Value,
                               unsigned ValueSize, unsigned MaxBytesToEmit);
 
   void emitValueToAlignment(unsigned ByteAlignment, int64_t Value = 0,
                             unsigned ValueSize = 1,
                             unsigned MaxBytesToEmit = 0) override;
 
-  void emitCodeAlignment(unsigned ByteAlignment, const MCSubtargetInfo *STI,
+  void emitCodeAlignment(Align Alignment, const MCSubtargetInfo *STI,
                          unsigned MaxBytesToEmit = 0) override;
 
   void emitValueToOffset(const MCExpr *Offset,
                          unsigned char Value,
                          SMLoc Loc) override;
 
   void emitFileDirective(StringRef Filename) override;
   void emitFileDirective(StringRef Filename, StringRef CompilerVerion,

 }
 
 void MCAsmStreamer::emitValueToAlignment(unsigned ByteAlignment, int64_t Value,
                                          unsigned ValueSize,
                                          unsigned MaxBytesToEmit) {
   emitAlignmentDirective(ByteAlignment, Value, ValueSize, MaxBytesToEmit);
 }
 
-void MCAsmStreamer::emitCodeAlignment(unsigned ByteAlignment,
+void MCAsmStreamer::emitCodeAlignment(Align Alignment,
                                       const MCSubtargetInfo *STI,
                                       unsigned MaxBytesToEmit) {
   // Emit with a text fill value.
   if (MAI->getTextAlignFillValue())
-    emitAlignmentDirective(ByteAlignment, MAI->getTextAlignFillValue(), 1,
+    emitAlignmentDirective(Alignment.value(), MAI->getTextAlignFillValue(), 1,
                            MaxBytesToEmit);
   else
-    emitAlignmentDirective(ByteAlignment, None, 1, MaxBytesToEmit);
+    emitAlignmentDirective(Alignment.value(), None, 1, MaxBytesToEmit);
 }
 
 void MCAsmStreamer::emitValueToOffset(const MCExpr *Offset,
                                       unsigned char Value,
                                       SMLoc Loc) {
   // FIXME: Verify that Offset is associated with the current section.
   OS << ".org ";
   Offset->print(OS, MAI);

llvm/lib/MC/MCELFStreamer.cpp

void MCELFStreamer::mergeFragment(MCDataFragment *DF,
   if (DF->getSubtargetInfo() == nullptr && EF->getSubtargetInfo())
     DF->setHasInstructions(*EF->getSubtargetInfo());
   DF->getContents().append(EF->getContents().begin(), EF->getContents().end());
 }
 
 void MCELFStreamer::initSections(bool NoExecStack, const MCSubtargetInfo &STI) {
   MCContext &Ctx = getContext();
   switchSection(Ctx.getObjectFileInfo()->getTextSection());
-  emitCodeAlignment(Ctx.getObjectFileInfo()->getTextSectionAlignment(), &STI);
+  emitCodeAlignment(Align(Ctx.getObjectFileInfo()->getTextSectionAlignment()),
+                    &STI);
 
   if (NoExecStack)
     switchSection(Ctx.getAsmInfo()->getNonexecutableStackSection(Ctx));
 }
 
 void MCELFStreamer::emitLabel(MCSymbol *S, SMLoc Loc) {
   auto *Symbol = cast<MCSymbolELF>(S);
   MCObjectStreamer::emitLabel(Symbol, Loc);

llvm/lib/MC/MCObjectStreamer.cpp

insert(new MCAlignFragment(Align(ByteAlignment), Value, ValueSize,
                              MaxBytesToEmit));
 
   // Update the maximum alignment on the current section if necessary.
   MCSection *CurSec = getCurrentSectionOnly();
   if (CurSec->getAlign() < ByteAlignment)
     CurSec->setAlignment(Align(ByteAlignment));
 }
 
-void MCObjectStreamer::emitCodeAlignment(unsigned ByteAlignment,
+void MCObjectStreamer::emitCodeAlignment(Align Alignment,
                                          const MCSubtargetInfo *STI,
                                          unsigned MaxBytesToEmit) {
-  emitValueToAlignment(ByteAlignment, 0, 1, MaxBytesToEmit);
+  emitValueToAlignment(Alignment.value(), 0, 1, MaxBytesToEmit);
   cast<MCAlignFragment>(getCurrentFragment())->setEmitNops(true, STI);
 }
 
 void MCObjectStreamer::emitValueToOffset(const MCExpr *Offset,
                                          unsigned char Value,
                                          SMLoc Loc) {
   insert(new MCOrgFragment(*Offset, Value, Loc));
 }

llvm/lib/MC/MCParser/AsmParser.cpp

bool AsmParser::parseDirectiveAlign(bool IsPow2, unsigned ValueSize) {
 
   // Check whether we should use optimal code alignment for this .align
   // directive.
   const MCSection *Section = getStreamer().getCurrentSectionOnly();
   assert(Section && "must have section to emit alignment");
   bool useCodeAlign = Section->useCodeAlign();
   if ((!HasFillExpr || Lexer.getMAI().getTextAlignFillValue() == FillExpr) &&
       ValueSize == 1 && useCodeAlign) {
-    getStreamer().emitCodeAlignment(Alignment, &getTargetParser().getSTI(),
-                                    MaxBytesToFill);
+    getStreamer().emitCodeAlignment(
+        Align(Alignment), &getTargetParser().getSTI(), MaxBytesToFill);
   } else {
     // FIXME: Target specific behavior about how the "extra" bytes are filled.
     getStreamer().emitValueToAlignment(Alignment, FillExpr, ValueSize,
                                        MaxBytesToFill);
   }
 
   return ReturnVal;
 }

llvm/lib/MC/MCParser/MasmParser.cpp

if (StructInProgress.empty()) {
     if (checkForValidSection())
       return true;
 
     // Check whether we should use optimal code alignment for this align
     // directive.
     const MCSection *Section = getStreamer().getCurrentSectionOnly();
     assert(Section && "must have section to emit alignment");
     if (Section->useCodeAlign()) {
-      getStreamer().emitCodeAlignment(Alignment, &getTargetParser().getSTI(),
+      getStreamer().emitCodeAlignment(Align(Alignment),
+                                      &getTargetParser().getSTI(),
                                       /*MaxBytesToEmit=*/0);
     } else {
       // FIXME: Target specific behavior about how the "extra" bytes are filled.
       getStreamer().emitValueToAlignment(Alignment, /*Value=*/0,
                                          /*ValueSize=*/1,
                                          /*MaxBytesToEmit=*/0);
     }
   } else {

llvm/lib/MC/MCStreamer.cpp

 void MCStreamer::emitULEB128Value(const MCExpr *Value) {}
 void MCStreamer::emitSLEB128Value(const MCExpr *Value) {}
 void MCStreamer::emitFill(const MCExpr &NumBytes, uint64_t Value, SMLoc Loc) {}
 void MCStreamer::emitFill(const MCExpr &NumValues, int64_t Size, int64_t Expr,
                           SMLoc Loc) {}
 void MCStreamer::emitValueToAlignment(unsigned ByteAlignment, int64_t Value,
                                       unsigned ValueSize,
                                       unsigned MaxBytesToEmit) {}
-void MCStreamer::emitCodeAlignment(unsigned ByteAlignment,
-                                   const MCSubtargetInfo *STI,
+void MCStreamer::emitCodeAlignment(Align Alignment, const MCSubtargetInfo *STI,
                                    unsigned MaxBytesToEmit) {}
 void MCStreamer::emitValueToOffset(const MCExpr *Offset, unsigned char Value,
                                    SMLoc Loc) {}
 void MCStreamer::emitBundleAlignMode(Align Alignment) {}
 void MCStreamer::emitBundleLock(bool AlignToEnd) {}
 void MCStreamer::finishImpl() {}
 void MCStreamer::emitBundleUnlock() {}
 

llvm/lib/MC/MCWinCOFFStreamer.cpp

 }
 
 void MCWinCOFFStreamer::initSections(bool NoExecStack,
                                      const MCSubtargetInfo &STI) {
   // FIXME: this is identical to the ELF one.
   // This emulates the same behavior of GNU as. This makes it easier
   // to compare the output as the major sections are in the same order.
   switchSection(getContext().getObjectFileInfo()->getTextSection());
-  emitCodeAlignment(4, &STI);
+  emitCodeAlignment(Align(4), &STI);
 
   switchSection(getContext().getObjectFileInfo()->getDataSection());
-  emitCodeAlignment(4, &STI);
+  emitCodeAlignment(Align(4), &STI);
 
   switchSection(getContext().getObjectFileInfo()->getBSSSection());
-  emitCodeAlignment(4, &STI);
+  emitCodeAlignment(Align(4), &STI);
 
   switchSection(getContext().getObjectFileInfo()->getTextSection());
 }
 
 void MCWinCOFFStreamer::emitLabel(MCSymbol *S, SMLoc Loc) {
   auto *Symbol = cast<MCSymbolCOFF>(S);
   MCObjectStreamer::emitLabel(Symbol, Loc);
 }

llvm/lib/Target/AArch64/AArch64AsmPrinter.cpp

void AArch64AsmPrinter::emitSled(const MachineInstr &MI, SledKind Kind) {
   //   LDR W0, #12 ; W0 := function ID
   //   LDR X16,#12 ; X16 := addr of __xray_FunctionEntry or __xray_FunctionExit
   //   BLR X16 ; call the tracing trampoline
   //   ;DATA: 32 bits of function ID
   //   ;DATA: lower 32 bits of the address of the trampoline
   //   ;DATA: higher 32 bits of the address of the trampoline
   //   LDP X0, X30, [SP], #16 ; pop X0 and the link register from the stack
   //
-  OutStreamer->emitCodeAlignment(4, &getSubtargetInfo());
+  OutStreamer->emitCodeAlignment(Align(4), &getSubtargetInfo());
   auto CurSled = OutContext.createTempSymbol("xray_sled_", true);
   OutStreamer->emitLabel(CurSled);
   auto Target = OutContext.createTempSymbol();
 
   // Emit "B #32" instruction, which jumps over the next 28 bytes.
   // The operand has to be the number of 4-byte instructions to jump over,
   // including the current instruction.
   EmitToStreamer(*OutStreamer, MCInstBuilder(AArch64::B).addImm(8));

llvm/lib/Target/ARM/ARMAsmPrinter.cpp

if (Base == ARM::PC) {
 
       // When using PC as the base, it's important that there is no padding
       // between the last ADDS and the start of the jump table. The jump table
       // is 4-byte aligned, so we ensure we're 4 byte aligned here too.
       //
       // FIXME: Ideally we could vary the LDRB index based on the padding
       // between the sequence and jump table, however that relies on MCExprs
       // for load indexes which are currently not supported.
-      OutStreamer->emitCodeAlignment(4, &getSubtargetInfo());
+      OutStreamer->emitCodeAlignment(Align(4), &getSubtargetInfo());
       EmitToStreamer(*OutStreamer, MCInstBuilder(ARM::tADDhirr)
                                        .addReg(Idx)
                                        .addReg(Idx)
                                        .addReg(Base)
                                        // Add predicate operands.
                                        .addImm(ARMCC::AL)
                                        .addReg(0));
 

llvm/lib/Target/ARM/ARMMCInstLower.cpp

void ARMAsmPrinter::EmitSled(const MachineInstr &MI, SledKind Kind)
   //   PUSH{ r0, lr }
   //   MOVW r0, #<lower 16 bits of function ID>
   //   MOVT r0, #<higher 16 bits of function ID>
   //   MOVW ip, #<lower 16 bits of address of __xray_FunctionEntry/Exit>
   //   MOVT ip, #<higher 16 bits of address of __xray_FunctionEntry/Exit>
   //   BLX ip
   //   POP{ r0, lr }
   //
-  OutStreamer->emitCodeAlignment(4, &getSubtargetInfo());
+  OutStreamer->emitCodeAlignment(Align(4), &getSubtargetInfo());
   auto CurSled = OutContext.createTempSymbol("xray_sled_", true);
   OutStreamer->emitLabel(CurSled);
   auto Target = OutContext.createTempSymbol();
 
   // Emit "B #20" instruction, which jumps over the next 24 bytes (because
   // register pc is 8 bytes ahead of the jump instruction by the moment CPU
   // is executing it).
   // By analogy to ARMAsmPrinter::emitPseudoExpansionLowering() |case ARM::B|.

llvm/lib/Target/ARM/AsmParser/ARMAsmParser.cpp

bool ARMAsmParser::parseDirectiveEven(SMLoc L) {
 
   if (!Section) {
     getStreamer().initSections(false, getSTI());
     Section = getStreamer().getCurrentSectionOnly();
   }
 
   assert(Section && "must have section to emit alignment");
   if (Section->useCodeAlign())
-    getStreamer().emitCodeAlignment(2, &getSTI());
+    getStreamer().emitCodeAlignment(Align(2), &getSTI());
   else
     getStreamer().emitValueToAlignment(2);
 
   return false;
 }
 
 /// parseDirectivePersonalityIndex
 ///   ::= .personalityindex index

 bool ARMAsmParser::parseDirectiveAlign(SMLoc L) {
   // NOTE: if this is not the end of the statement, fall back to the target
   // agnostic handling for this directive which will correctly handle this.
   if (parseOptionalToken(AsmToken::EndOfStatement)) {
     // '.align' is target specifically handled to mean 2**2 byte alignment.
     const MCSection *Section = getStreamer().getCurrentSectionOnly();
     assert(Section && "must have section to emit alignment");
     if (Section->useCodeAlign())
-      getStreamer().emitCodeAlignment(4, &getSTI(), 0);
+      getStreamer().emitCodeAlignment(Align(4), &getSTI(), 0);
     else
       getStreamer().emitValueToAlignment(4, 0, 1, 0);
     return false;
   }
   return true;
 }
 
 /// parseDirectiveThumbSet

llvm/lib/Target/CSKY/MCTargetDesc/CSKYTargetStreamer.cpp

if (Entries.empty())
     return;
 
   if (CurrentSection != nullptr)
     Streamer.switchSection(CurrentSection);
 
   Streamer.emitDataRegion(MCDR_DataRegion);
   for (const ConstantPoolEntry &Entry : Entries) {
     Streamer.emitCodeAlignment(
-        Entry.Size,
+        Align(Entry.Size),
         Streamer.getContext().getSubtargetInfo()); // align naturally
     Streamer.emitLabel(Entry.Label);
     Streamer.emitValue(Entry.Value, Entry.Size, Entry.Loc);
   }
   Streamer.emitDataRegion(MCDR_DataRegionEnd);
   Entries.clear();
 }
 

llvm/lib/Target/Hexagon/AsmParser/HexagonAsmParser.cpp

if (!Parser.getStreamer().hasRawTextSupport()) {
         myCharStr = ".lita";
         mySection = getContext().getELFSection(myCharStr, ELF::SHT_PROGBITS,
                                                ELF::SHF_ALLOC | ELF::SHF_WRITE);
       } else
         llvm_unreachable("unexpected type of machine operand!");
 
       MES->switchSection(mySection);
       unsigned byteSize = is32bit ? 4 : 8;
-      getStreamer().emitCodeAlignment(byteSize, &getSTI(), byteSize);
+      getStreamer().emitCodeAlignment(Align(byteSize), &getSTI(), byteSize);
 
       MCSymbol *Sym;
 
       // for symbols, get rid of prepended ".gnu.linkonce.lx."
 
       // emit symbol if needed
       if (Absolute) {
         Sym = getContext().getOrCreateSymbol(StringRef(myCharStr.c_str() + 16));

llvm/lib/Target/Hexagon/HexagonAsmPrinter.cpp

MCSectionELF *Section = OutStreamer.getContext().getELFSection(
         sectionName, ELF::SHT_PROGBITS, ELF::SHF_WRITE | ELF::SHF_ALLOC);
     OutStreamer.switchSection(Section);
 
     Sym = AP.OutContext.getOrCreateSymbol(Twine(symbolName));
     if (Sym->isUndefined()) {
       OutStreamer.emitLabel(Sym);
       OutStreamer.emitSymbolAttribute(Sym, MCSA_Global);
       OutStreamer.emitIntValue(Value, AlignSize);
-      OutStreamer.emitCodeAlignment(AlignSize, &STI);
+      OutStreamer.emitCodeAlignment(Align(AlignSize), &STI);
     }
   } else {
     assert(Imm.isExpr() && "Expected expression and found none");
     const MachineOperand &MO = MI.getOperand(1);
     assert(MO.isGlobal() || MO.isCPI() || MO.isJTI());
     MCSymbol *MOSymbol = nullptr;
     if (MO.isGlobal())
       MOSymbol = AP.getSymbol(MO.getGlobal());
MCSectionELF *Section = OutStreamer.getContext().getELFSection(
         ".lita", ELF::SHT_PROGBITS, ELF::SHF_WRITE | ELF::SHF_ALLOC);
 
     OutStreamer.switchSection(Section);
     Sym = AP.OutContext.getOrCreateSymbol(Twine(LitaName));
     if (Sym->isUndefined()) {
       OutStreamer.emitLabel(Sym);
       OutStreamer.emitSymbolAttribute(Sym, MCSA_Local);
       OutStreamer.emitValue(Imm.getExpr(), AlignSize);
-      OutStreamer.emitCodeAlignment(AlignSize, &STI);
+      OutStreamer.emitCodeAlignment(Align(AlignSize), &STI);
     }
   }
   return Sym;
 }
 
 static MCInst ScaleVectorOffset(MCInst &Inst, unsigned OpNo,
                                 unsigned VectorSize, MCContext &Ctx) {
   MCInst T;

llvm/lib/Target/Hexagon/HexagonTargetStreamer.h

 #define HEXAGONTARGETSTREAMER_H
 
 #include "llvm/MC/MCStreamer.h"
 
 namespace llvm {
 class HexagonTargetStreamer : public MCTargetStreamer {
 public:
   HexagonTargetStreamer(MCStreamer &S) : MCTargetStreamer(S) {}
-  virtual void emitCodeAlignment(unsigned ByteAlignment,
-                                 const MCSubtargetInfo *STI,
+  virtual void emitCodeAlignment(Align Alignment, const MCSubtargetInfo *STI,
                                  unsigned MaxBytesToEmit = 0){};
   virtual void emitFAlign(unsigned Size, unsigned MaxBytesToEmit){};
   virtual void emitCommonSymbolSorted(MCSymbol *Symbol, uint64_t Size,
                                       unsigned ByteAlignment,
                                       unsigned AccessGranularity){};
   virtual void emitLocalCommonSymbolSorted(MCSymbol *Symbol, uint64_t Size,
                                            unsigned ByteAlign,
                                            unsigned AccessGranularity){};
 };
 }
 
 #endif

llvm/lib/Target/Mips/MCTargetDesc/MipsTargetStreamer.cpp

if (RoundSectionSizes) {
     // size.
     MCStreamer &OS = getStreamer();
     for (MCSection &S : MCA) {
       MCSectionELF &Section = static_cast<MCSectionELF &>(S);
 
       Align Alignment = Section.getAlign();
       OS.switchSection(&Section);
       if (Section.useCodeAlign())
-        OS.emitCodeAlignment(Alignment.value(), &STI, Alignment.value());
+        OS.emitCodeAlignment(Alignment, &STI, Alignment.value());
       else
         OS.emitValueToAlignment(Alignment.value(), 0, 1, Alignment.value());
     }
   }
 
   const FeatureBitset &Features = STI.getFeatureBits();
 
   // Update e_header flags. See the FIXME and comment above in

llvm/lib/Target/Mips/MipsAsmPrinter.cpp

void MipsAsmPrinter::EmitSled(const MachineInstr &MI, SledKind Kind) {
   //   ORI      T9, T9, %lo(__xray_FunctionEntry/Exit)
   //   LUI      T0, %hi(function_id)
   //   JALR     T9
   //   ADDIU    T0, T0, %lo(function_id)
   //   LD       T9, 0(SP)
   //   LD       RA, 8(SP)
   //   DADDIU   SP, SP, 16
   //
-  OutStreamer->emitCodeAlignment(4, &getSubtargetInfo());
+  OutStreamer->emitCodeAlignment(Align(4), &getSubtargetInfo());
   auto CurSled = OutContext.createTempSymbol("xray_sled_", true);
   OutStreamer->emitLabel(CurSled);
   auto Target = OutContext.createTempSymbol();
 
   // Emit "B .tmpN" instruction, which jumps over the nop sled to the actual
   // start of function
   const MCExpr *TargetExpr = MCSymbolRefExpr::create(
       Target, MCSymbolRefExpr::VariantKind::VK_None, OutContext);

llvm/lib/Target/PowerPC/MCTargetDesc/PPCELFStreamer.cpp

void PPCELFStreamer::emitPrefixedInstruction(const MCInst &Inst,
   // order to achieve this, a nop is added prior to any such boundary-crossing
   // prefixed instruction. Align to 64 bytes if possible but add a maximum of 4
   // bytes when trying to do that. If alignment requires adding more than 4
   // bytes then the instruction won't be aligned. When emitting a code alignment
   // a new fragment is created for this alignment. This fragment will contain
   // all of the nops required as part of the alignment operation. In the cases
   // when no nops are added then The fragment is still created but it remains
   // empty.
-  emitCodeAlignment(64, &STI, 4);
+  emitCodeAlignment(Align(64), &STI, 4);
 
   // Emit the instruction.
   // Since the previous emit created a new fragment then adding this instruction
   // also forces the addition of a new fragment. Inst is now the first
   // instruction in that new fragment.
   MCELFStreamer::emitInstruction(Inst, STI);
 
   // The above instruction is forced to start a new fragment because it

llvm/lib/Target/PowerPC/MCTargetDesc/PPCXCOFFStreamer.cpp

 void PPCXCOFFStreamer::emitPrefixedInstruction(const MCInst &Inst,
                                                const MCSubtargetInfo &STI) {
   // Prefixed instructions must not cross a 64-byte boundary (i.e. prefix is
   // before the boundary and the remaining 4-bytes are after the boundary). In
   // order to achieve this, a nop is added prior to any such boundary-crossing
   // prefixed instruction. Align to 64 bytes if possible but add a maximum of 4
   // bytes when trying to do that. If alignment requires adding more than 4
   // bytes then the instruction won't be aligned.
-  emitCodeAlignment(64, &STI, 4);
+  emitCodeAlignment(Align(64), &STI, 4);
 
   // Emit the instruction.
   // Since the previous emit created a new fragment then adding this instruction
   // also forces the addition of a new fragment. Inst is now the first
   // instruction in that new fragment.
   MCXCOFFStreamer::emitInstruction(Inst, STI);
 }
 

llvm/lib/Target/PowerPC/PPCAsmPrinter.cpp

case TargetOpcode::PATCHABLE_RET: {
     //   std 0, -8(1)
     //   mflr 0
     //   bl __xray_FunctionExit
     //   mtlr 0
     //   b(lr)?
     //
     // Update compiler-rt/lib/xray/xray_powerpc64.cc accordingly when number
     // of instructions change.
-    OutStreamer->emitCodeAlignment(8, &getSubtargetInfo());
+    OutStreamer->emitCodeAlignment(Align(8), &getSubtargetInfo());
     MCSymbol *BeginOfSled = OutContext.createTempSymbol();
     OutStreamer->emitLabel(BeginOfSled);
     EmitToStreamer(*OutStreamer, RetInst);
     EmitToStreamer(*OutStreamer, MCInstBuilder(PPC::NOP));
     EmitToStreamer(
         *OutStreamer,
         MCInstBuilder(PPC::STD).addReg(PPC::X0).addImm(-8).addReg(PPC::X1));
     EmitToStreamer(*OutStreamer, MCInstBuilder(PPC::MFLR8).addReg(PPC::X0));

llvm/lib/Target/X86/AsmParser/X86AsmParser.cpp

if (parseEOL())
     return false;
 
   const MCSection *Section = getStreamer().getCurrentSectionOnly();
   if (!Section) {
     getStreamer().initSections(false, getSTI());
     Section = getStreamer().getCurrentSectionOnly();
   }
   if (Section->useCodeAlign())
-    getStreamer().emitCodeAlignment(2, &getSTI(), 0);
+    getStreamer().emitCodeAlignment(Align(2), &getSTI(), 0);
   else
     getStreamer().emitValueToAlignment(2, 0, 1, 0);
   return false;
 }
 
 /// ParseDirectiveCode
 ///  ::= .code16 | .code32 | .code64
 bool X86AsmParser::ParseDirectiveCode(StringRef IDVal, SMLoc L) {

llvm/lib/Target/X86/X86MCInstLower.cpp

void X86AsmPrinter::LowerPATCHABLE_EVENT_CALL(const MachineInstr &MI,
   //   ...
   //   callq __xrayCustomEvent  // already lowered
   //   ...
   //
   // ---
   // First we emit the label and the jump.
   auto CurSled = OutContext.createTempSymbol("xray_event_sled_", true);
   OutStreamer->AddComment("# XRay Custom Event Log");
-  OutStreamer->emitCodeAlignment(2, &getSubtargetInfo());
+  OutStreamer->emitCodeAlignment(Align(2), &getSubtargetInfo());
   OutStreamer->emitLabel(CurSled);
 
   // Use a two-byte `jmp`. This version of JMP takes an 8-bit relative offset as
   // an operand (computed as an offset from the jmp instruction).
   // FIXME: Find another less hacky way do force the relative jump.
   OutStreamer->emitBinaryData("\xeb\x0f");
 
   // The default C calling convention will place two arguments into %rcx and
void X86AsmPrinter::LowerPATCHABLE_TYPED_EVENT_CALL(const MachineInstr &MI,
   //   ...
   //   callq __xrayTypedEvent  // already lowered
   //   ...
   //
   // ---
   // First we emit the label and the jump.
   auto CurSled = OutContext.createTempSymbol("xray_typed_event_sled_", true);
   OutStreamer->AddComment("# XRay Typed Event Log");
-  OutStreamer->emitCodeAlignment(2, &getSubtargetInfo());
+  OutStreamer->emitCodeAlignment(Align(2), &getSubtargetInfo());
   OutStreamer->emitLabel(CurSled);
 
   // Use a two-byte `jmp`. This version of JMP takes an 8-bit relative offset as
   // an operand (computed as an offset from the jmp instruction).
   // FIXME: Find another less hacky way do force the relative jump.
   OutStreamer->emitBinaryData("\xeb\x14");
 
   // An x86-64 convention may place three arguments into %rcx, %rdx, and R8,
void X86AsmPrinter::LowerPATCHABLE_FUNCTION_ENTER(const MachineInstr &MI,
   //
   // We need the 9 bytes because at runtime, we'd be patching over the full 11
   // bytes with the following pattern:
   //
   //   mov %r10, <function id, 32-bit>   // 6 bytes
   //   call <relative offset, 32-bits>   // 5 bytes
   //
   auto CurSled = OutContext.createTempSymbol("xray_sled_", true);
-  OutStreamer->emitCodeAlignment(2, &getSubtargetInfo());
+  OutStreamer->emitCodeAlignment(Align(2), &getSubtargetInfo());
   OutStreamer->emitLabel(CurSled);
 
   // Use a two-byte `jmp`. This version of JMP takes an 8-bit relative offset as
   // an operand (computed as an offset from the jmp instruction).
   // FIXME: Find another less hacky way do force the relative jump.
   OutStreamer->emitBytes("\xeb\x09");
   emitX86Nops(*OutStreamer, 9, Subtarget);
   recordSled(CurSled, MI, SledKind::FUNCTION_ENTER, 2);
void X86AsmPrinter::LowerPATCHABLE_RET(const MachineInstr &MI,
   //
   //   .p2align 1, ...
   // .Lxray_sled_N:
   //   ret  # or equivalent instruction
   //   # 10 bytes worth of noops
   //
   // This just makes sure that the alignment for the next instruction is 2.
   auto CurSled = OutContext.createTempSymbol("xray_sled_", true);
-  OutStreamer->emitCodeAlignment(2, &getSubtargetInfo());
+  OutStreamer->emitCodeAlignment(Align(2), &getSubtargetInfo());
   OutStreamer->emitLabel(CurSled);
   unsigned OpCode = MI.getOperand(0).getImm();
   MCInst Ret;
   Ret.setOpcode(OpCode);
   for (auto &MO : drop_begin(MI.operands()))
     if (auto MaybeOperand = MCIL.LowerMachineOperand(&MI, MO))
       Ret.addOperand(*MaybeOperand);
   OutStreamer->emitInstruction(Ret, getSubtargetInfo());
   emitX86Nops(*OutStreamer, 10, Subtarget);
   recordSled(CurSled, MI, SledKind::FUNCTION_EXIT, 2);
 }
 
 void X86AsmPrinter::LowerPATCHABLE_TAIL_CALL(const MachineInstr &MI,
                                              X86MCInstLower &MCIL) {
   NoAutoPaddingScope NoPadScope(*OutStreamer);
 
   // Like PATCHABLE_RET, we have the actual instruction in the operands to this
   // instruction so we lower that particular instruction and its operands.
   // Unlike PATCHABLE_RET though, we put the sled before the JMP, much like how
   // we do it for PATCHABLE_FUNCTION_ENTER. The sled should be very similar to
   // the PATCHABLE_FUNCTION_ENTER case, followed by the lowering of the actual
   // tail call much like how we have it in PATCHABLE_RET.
   auto CurSled = OutContext.createTempSymbol("xray_sled_", true);
-  OutStreamer->emitCodeAlignment(2, &getSubtargetInfo());
+  OutStreamer->emitCodeAlignment(Align(2), &getSubtargetInfo());
   OutStreamer->emitLabel(CurSled);
   auto Target = OutContext.createTempSymbol();
 
   // Use a two-byte `jmp`. This version of JMP takes an 8-bit relative offset as
   // an operand (computed as an offset from the jmp instruction).
   // FIXME: Find another less hacky way do force the relative jump.
   OutStreamer->emitBytes("\xeb\x09");
   emitX86Nops(*OutStreamer, 9, Subtarget);