FileCheck: Add support for numeric variables and expressions

[thopre]

Summary

Sometimes there's a need to verify output which contain several numeric
values that are related by a numeric expression. For example, one might
want to check that two numbers are consecutive but accept any value for
the smallest of the two.

This patch introduces support for numeric variables and expressions to
express this sort of constraint. A user can then define variables to
have a numeric value and write numeric expression using those variable.
A matching format specifier allows to match numbers in a variety of
format: signed and unsigned decimal numbers as well as hex number in
lower or capital case. For example, matching 2 consecutive signed
decimal integers separated by a space is done via:

[[%d,#N:]] #N+1

The syntax is modeled after that of use and definition of the already
supported variables flavour (renamed pattern variable for clarity) and
pseudo variable by adding a # just after the double opening square
bracket [[. Full details of the syntax can be found in the updated
docs/CommandGuide/FileCheck.rst.

One notable pitfall is that CHECK pattern with numeric expression using
variable defined on the same line might fail to match despite there be a
line which satisfy the conditions expressed by those numeric expression.
This is due to lack of needed support from the regular expression engine
that FileCheck relies on and is documented in the updated
docs/CommandGuide/FileCheck.rst as well as possible workaround.

Copyright:

• Linaro (changes up to diff 183612 of revision D55940)
• GraphCore (changes in later versions)

[probinson]

Maybe this should be a new class of "numeric variables" with distinct syntax, e.g., [[#VAR]] or something, with an implicit regex of [[:digit:]]+ instead of making the test-writer use a valid regex.

[jhenderson]

First up, I want to say thank you for doing this! This is one of the major missing features from FileCheck over the test harness I am used to using, and leads to fragile testing where people have hard-coded in values in tests that are subject to change.

Do you intend to add hexadecimal support for this? I think it's fine not in this change, but I think it would be a valuable further addition - a lot of binary dumping tools print in hex. I think we should consider whether this impacts the way it's written as well (because presumably we'll need some special syntax to indicate we are capturing a variable as a hex number, not an integer - note that not all hex numbers are prefixed with "0x" when printed by llvm tools).

Also, what about situations like [[Var1-Var2]]? Also, what about [[Var1 - 1]] (with the spaces - this is more readable to me)?

I don't fully follow the implementation, as I'm not too familiar with FileCheck's code. I do have a number general nits, which I've tried to comment on where I saw them. One repeated one, I wanted to point out was variable naming, where you've often used lower case - see https://llvm.org/docs/CodingStandards.html#name-types-functions-variables-and-enumerators-properly for details.

docs/CommandGuide/FileCheck.rst

619–623

I'm wondering why this comment has changed?

test/FileCheck/var-expression.txt

3 ↗

(On Diff #154626)

Not sure if the LLVM coding style applies for test comments, but assuming they do, these need capital letters and trailing full stops.

29 ↗

(On Diff #154626)

VAREL? I have no idea how to expand that name...!

utils/FileCheck/FileCheck.cpp

112 ↗

(On Diff #154626)

Missing trailing full stop.

113 ↗

(On Diff #154626)

Shouldn't this be a capitalized name?

422 ↗

(On Diff #154626)

Spurious space before CheckOnly.

I might be being a bit dim, but why can't "[[Foo]]" be an expression, if it is missing any arithmetic?

428 ↗

(On Diff #154626)

ie -> i.e.

435 ↗

(On Diff #154626)

val -> Val

I'd actually avoid using both val and Value in the same scope, as it gets very confusing. Please come up with a different name for one of them. E.g. Value could become ValueString.

470–472 ↗

(On Diff #154626)

op -> Op
offset -> Offset

490 ↗

(On Diff #154626)

variable Name -> variable \p Name (I think?)

497 ↗

(On Diff #154626)

index -> Index

500 ↗

(On Diff #154626)

isExpression -> IsExpression

502–505 ↗

(On Diff #154626)

same line due -> same line, due
Remove extra space before "Therefore"
explicitely -> explicitly

509 ↗

(On Diff #154626)

exist -> exists

531–532 ↗

(On Diff #154626)

same-line use are -> either "same-line uses are" or "same-line use is"

533 ↗

(On Diff #154626)

git? Please use a more descriptive name.

Also, should be capitalised.

569–570 ↗

(On Diff #154626)

I don't think you need the initialiser here.

575–581 ↗

(On Diff #154626)

Are we referring to a specific variable here? If so, please use "the variable" not just "variable". If not, please use "a variable". If there are multiple variables the first sentences refer to, please use the plural to make it clear.
"First pass" -> "The first pass". Similarly "Second pass" -> "The second pass".

I'm a little confused by the first use of variable in this bit: "Note that non-expression variable use of variables...". Maybe it needs re-wording.

590–591 ↗

(On Diff #154626)

is... -> Is...

604 ↗

(On Diff #154626)

I'm not sure how to parse this sentence. I think you might mean: "Wait for the second pass to replace uses in the expression." But I'm not certain.

622 ↗

(On Diff #154626)

During first pass -> During the first pass

625 ↗

(On Diff #154626)

in turns -> in turn

626 ↗

(On Diff #154626)

expression -> the expression.

655 ↗

(On Diff #154626)

I'd get rid of "for each of the definition" in this comment, as I think it's implicit. If you think it's important get rid of the "of the".
Also "expression" -> "the expression" or "expressions"

679 ↗

(On Diff #154626)

Use llvm_unreachable here.

[grimar]

Few comments from me.

utils/FileCheck/FileCheck.cpp

348 ↗

(On Diff #154626)

I would inline:

if (IsExpression)
  Name = Expr.substr(0, Expr.find_first_of(validArithOps));

354 ↗

(On Diff #154626)

You do a lookup in the VariableDefs two times here, please avoid.
Also can you use vector's back() instead of constructions like --(VariableDefs[Name].end())?

463 ↗

(On Diff #154626)

You do not need else after return:

if (Expr.empty() && CheckOnly)
  return true;

 if (!Expr.empty()) {
   ...

507 ↗

(On Diff #154626)

You are doing a search of validArithOps in Name second time here. I would try to avoid.

667 ↗

(On Diff #154626)

In this block you have a StringMap LocalVariableTable and you perform 3 lookups on this map,
though can do that only once I think. For example like that:

auto P = LocalVariableTable.insert({VariableDef.first, {}});
if (P.second)
  P.first->second.push_back(
      {MatchInfo[VariableDefIt.first], VariableDefIt.second});

671 ↗

(On Diff #154626)

Since there are only 2 cases here, that might be better looking as IFs:

if (State == Unprocessed)
  State = DefProcessed;
else if (State == DefProcessed)
  State = ExprProcessed;
else
  llvm_unreachable("...");

690 ↗

(On Diff #154626)

I would suggest something without decrementing of the iterators:

for (const auto &VariableDef : VariableDefs) {
  const std::pair<unsigned, unsigned > &P = VariableDef.second.back();
  assert(P.first < MatchInfo.size() && "Internal paren error");
  GlobalVariableTable[VariableDef.first] = MatchInfo[P.first];
}

Also, btw this assert does not make sense here, because MatchInfo is the SmallVector
and it's operator[] already has an assert, so you can remove it I think.

[grimar]

utils/FileCheck/FileCheck.cpp

373 ↗

(On Diff #154626)

You are doing a lookup in VariableDefs 3 times here. Please avoid.

[thopre]

Thanks all for the valuable comments. It seems clear that more discussion is needed on the syntax before doing any code change. I'll think about it and post a proposal to the ML.

[thopre]

In D49084#1156379, @probinson wrote:

Maybe this should be a new class of "numeric variables" with distinct syntax, e.g., [[#VAR]] or something, with an implicit regex of [[:digit:]]+ instead of making the test-writer use a valid regex.

I'm not sure I'm following you. Do you mean using a different syntax when (i) defining numeric variable or (ii) when using numeric expression?
I also do not understand how this would prevent the test-writer from having to use a valid regex. Could you give an example of the problem you see?

[thopre]

In D49084#1158838, @thopre wrote:

In D49084#1156379, @probinson wrote:

Maybe this should be a new class of "numeric variables" with distinct syntax, e.g., [[#VAR]] or something, with an implicit regex of [[:digit:]]+ instead of making the test-writer use a valid regex.

I'm not sure I'm following you. Do you mean using a different syntax when (i) defining numeric variable or (ii) when using numeric expression?
I also do not understand how this would prevent the test-writer from having to use a valid regex. Could you give an example of the problem you see?

Oh you mean using #VAR to define a numeric variable, therefore avoiding the need to have a regular expression. Yes, I like the idea, especially since it can work with the idea of a syntax to specify the base in which to interpret things as suggested by @jhenderson. What it needs though is a way to distinguish between definition and use though. I'll think about it.

[arichardson]

I case people are interested I have also implemented something similar in our fork of llvm. I chose [[@EXPR var + 0x42]] as the syntax. I also added some functions such as [[@EXPR hex(VAR)]].
Variables can either by referenced by name or if they conflict with one of the builtin functions using ${x} syntax: [[@EXPR toupper(hex(${hex}))]]
Some examples of what it can do can be seen here: https://github.com/CTSRD-CHERI/llvm/blob/master/test/FileCheck/expressions.txt

The implementation is IMO quite ugly (mostly a stripped down copy of lld's linker script parser) so I never got around to cleaning it up for upstream submission.

[jhenderson]

In D49084#1160851, @arichardson wrote:

I case people are interested I have also implemented something similar in our fork of llvm. I chose [[@EXPR var + 0x42]] as the syntax. I also added some functions such as [[@EXPR hex(VAR)]].
Variables can either by referenced by name or if they conflict with one of the builtin functions using ${x} syntax: [[@EXPR toupper(hex(${hex}))]]

Simple functions are also on my wish-list! The main ones we care about are converting to and from hex numbers, and being able to do additions and subtractions. But I think just the basic integer and hex reading and additions would be a good start.

[arichardson]

In D49084#1161262, @jhenderson wrote:

In D49084#1160851, @arichardson wrote:

I case people are interested I have also implemented something similar in our fork of llvm. I chose [[@EXPR var + 0x42]] as the syntax. I also added some functions such as [[@EXPR hex(VAR)]].
Variables can either by referenced by name or if they conflict with one of the builtin functions using ${x} syntax: [[@EXPR toupper(hex(${hex}))]]

Simple functions are also on my wish-list! The main ones we care about are converting to and from hex numbers, and being able to do additions and subtractions. But I think just the basic integer and hex reading and additions would be a good start.

I added hex, oct, bin, dec + toupper/tolower (https://github.com/CTSRD-CHERI/llvm/blob/master/utils/FileCheck/FileCheck.cpp#L697) but I think I only ever ended up using dec/hex/toupper in the tests that I've written since.

[rnk]

FWIW I had a use case for this recently, and found it hadn't landed. Is there anything blocking that you need help with?

[thopre]

In D49084#1203189, @rnk wrote:

FWIW I had a use case for this recently, and found it hadn't landed. Is there anything blocking that you need help with?

My apologies for not replying earlier, didn't see the comment until now. Nothing blocking, splitting my time between GNU and LLVM work so progress has been slower than expected. I am nearly done now, I expect to publish a completely new version sometimes this week. Stay tuned!

Best regards.

[thopre]

FileCheck: Add support for numeric variables and expressions

Summary:
Sometimes there's a need to verify output which contain several numeric
values that are related by a numeric expression. For example, one might
want to check that two numbers are consecutive but accept any value for
the smallest of the two.

This patch introduces support for numeric variables and expressions to
express this sort of constraint. A user can then define variables to
have a numeric value and write numeric expression using those variable.
A matching format specifier allows to match numbers in a variety of
format: signed and unsigned decimal numbers as well as hex number in
lower or capital case. For example, matching 2 consecutive signed
decimal integers separated by a space is done via:

[[%d,#N:]] #N+1

The syntax is modeled after that of use and definition of the already
supported variables flavour (renamed pattern variable for clarity) and
pseudo variable by adding a # just after the double opening square
bracket [[. Full details of the syntax can be found in the updated
docs/CommandGuide/FileCheck.rst.

One notable pitfall is that CHECK pattern with numeric expression using
variable defined on the same line might fail to match despite there be a
line which satisfy the conditions expressed by those numeric expression.
This is due to lack of needed support from the regular expression engine
that FileCheck relies on and is documented in the updated
docs/CommandGuide/FileCheck.rst as well as possible workaround.

Reviewers: probinson, arichardson, jhenderson, rnk, jdenny

Subscribers: llvm-commits

[probinson]

I am willing to review this; however it is a very large patch, which will take time to go through. Also, after tomorrow, I am on holiday until 3 January.

Some parts of it look like they could be split off into separate patches; for example, the command-line option handling looks like it could be done separately. I wonder if the refactoring of the @LINE handling into the new expression handling could also be separated out.
If not, that's okay, it will just make the review take a bit longer.

As a first step, I have a structural suggestion for the documentation. Once that is done, I will probably have some more detailed comments on wording, but they can wait for now.

docs/CommandGuide/FileCheck.rst

570

The topic and syntax are more complicated than anything else FileCheck does, so I think it would be better separate the syntax description into two parts: using numeric expressions, and defining numeric variables. The syntax for a numeric expression would be
[[# <constraint> <expr> ]]
and then you can describe how to define the variables,
[[# <fmtspec>,<NUMVAR>: <constraint> <expr> ]]
which builds on the syntax for using variables. I think this ordering will be easier to explain and to understand.

596

Please give examples of what these lines will match, and what they will not match.

[thopre]

Document how to set numeric variable with -D option

[arichardson]

Thanks for updating this patch. It will be very useful!

include/llvm/Support/FileCheck.h

225

Does this need to be a shared_ptr? Could it be a unique_ptr instead?

lib/Support/FileCheck.cpp

81

Could this return a llvm::Optional<std::string> to avoid the output-parameter?

1076

This could be deleted if you initialize CaptureParenNeeded to false at the beginning of the scope. It would also ensure that the variable is never uninitialized.

[hfinkel]

Thanks for updating this patch. It will be very useful!

+1

[thopre]

docs/CommandGuide/FileCheck.rst

619–623

It changes for 2 reasons:

• it redefines @LINE as a (pseudo) numeric variable as opposed to a pattern variable since it behaves like a numeric variable
• it removes the explanation about offset since it comes naturally from being a numeric variable and then more (eg. #@LINE + OFFSETVAR).

In short, because we now have numeric variable it is easier to say @LINE is one and say what it evaluates to and leave what can be done to it to the general description of numeric variable.

include/llvm/Support/FileCheck.h

225

Several numeric expressions can refer to the same numeric variable in which case you want the reference counting so that when calling the destructor for those numeric expression delete is called only once on that variable.

lib/Support/FileCheck.cpp

81

Yes indeed and perhaps in a few other places as well. Thanks

[jhenderson]

This change is so large that it's going to take quite a while to review. However, I've made a few initial comments on the header. I'll come back to this next week and continue from there.

include/llvm/Support/FileCheck.h

41

Nit: Code -> code

44

Why the declaration here?

52

Nit: print -> printed

57

I don't really understand this comment. I think you are saying that this "Set" variable indicates whether the format is explicit or not, right? If so, rename the variable to something like IsExplicit or similar.

60

Several -> If set, there are ...

81

Don't namespace this. Just make the enum inside a scoped enum (i.e. enum class).

82–84

I think the general style in LLVM is single space after full stop (applies here and elsewhere).

"is a numeric expression (and thus value ...) available" -> "a numeric expression is available (and thus the value ...)"

95–96

I'm not sure the second sentence here is necessary.

97

I'm not sure you need to name all your classes "FileCheckXXX". You can shorten their names by dropping the FileCheck part, I reckon.

99–103

Why not just always store in a single uint64_t field called Value and convert to signed when requested?

Also, don't unnecessarily abbreviate variables like this.

131–132

I don't think you need this comment. operator== is fairly self-explanatory as to its purpose...!

139

LLVM style is for camel-case, starting with lower-case letters for method and function names. Also, don't bother commenting if the function purpose is obvious from its name.

145

What is a tentative value?

169

You don't need the "struct" here or in any of the other function arguments or variable declarations etc.

169–170

This should probably return an Expected<std::string> or Optional<std::string> and not use an output parameter.

172–180

Could these two just be overloads of operator+ and operator-?

183–184

Only the first sentence here is needed. The other two are implicit by the fact that this is a virtual class with abstract methods.

191–192

What does "null" mean in this context? We're not dealing with pointers... Assuming it's some kind of no-format, perhaps calling it by the corresponding variable name might be better.

Again, the last sentence is unnecessary, since it's implicit in the "= 0" part of the function declaration.

195–198

This isn't the behaviour I'd expect a function of this name to do. I'd expect it to return a vector of names, not append to an input parameter.

Other nit in the comment: overrided -> overridden.

201

Nit: litteral -> literal

209–213

Similar to the FileCheckNumExprVal class, I don't think you need both constructors. One should suffice.

215–217

I'd drop the first sentence and rephrase the second:
"Return the node itself and set \p Fmt to none, since literals do not have conversion formats" (where none is a placeholder for a better word than null).

227–228

from x 2 -> by

232

It's a little unclear what is meant by "matching format" here. Is it the format this expression can match against (i.e. hex/decimal etc), or what?

236

Like struct, you don't nee the enum here.

246

for numeric -> for a numeric

247–248

eg. -> e.g.

I'd drop the bit in parentheses at the end of the sentence. If somebody starts using this for another person, this comment will almost certainly go stale.

252–253

Drop the reference to the shared_ptr in this sentence, and change the second sentence to something like "The pointer is guaranteed to be valid as long as this object is."

256

What is meant by "matched" in this context?

268

Remove the first "can"

274

Rather than returning a bool, and passing in a parameter that will be set, this and similar functions should probably return an Expected<T> or Optional<T>.

294–299

Why are these two different functions?

[thopre]

Besides typo and wording improvements:

• Merge Eval and SetValueFromEval
• Use union to store an int64_t or uint64_t in FileCheckNumExprVal
• Turn Add and Sub into operator overloading.

[thopre]

include/llvm/Support/FileCheck.h

81

I was following what is done for the Check enum. Should that enum be changed (in a separate patch)?

82–84

I saw many occurrences of 2 spaces after dot in FileCheck and thought it had a different code style. Upon inspection I suppose it must be mistakes as single space is more common:

$ git grep -E -c "\. [^ ]" fcefe03bf94005e045499ed6650212cd1e9bed01 llvm/lib/Support/FileCheck.cpp
fcefe03bf94005e045499ed6650212cd1e9bed01:llvm/lib/Support/FileCheck.cpp:20
$ git grep -E -c "\. [^ ]" fcefe03bf94005e045499ed6650212cd1e9bed01 llvm/lib/Support/FileCheck.cpp
fcefe03bf94005e045499ed6650212cd1e9bed01:llvm/lib/Support/FileCheck.cpp:12

$ git grep -E -c "\. [^ ]" fcefe03bf94005e045499ed6650212cd1e9bed01 llvm/include/llvm/Support/FileCheck.h
fcefe03bf94005e045499ed6650212cd1e9bed01:llvm/include/llvm/Support/FileCheck.h:4
$ git grep -E -c "\. [^ ]" fcefe03bf94005e045499ed6650212cd1e9bed01 llvm/include/llvm/Support/FileCheck.h
fcefe03bf94005e045499ed6650212cd1e9bed01:llvm/include/llvm/Support/FileCheck.h:3

97

The FileCheck prefix was added when FileCheck logic was moved into a library. See comment from Bogner in https://reviews.llvm.org/D50283

99–103

Since unsigned to signed conversion is implementation defined and reinterpret_cast does not work between integer types, I would have to do the two-complement manually. I've used a union instead, hope you like it better.

139

There are actually more examples of camel-case starting with capital letter: all the CheckFoo (eg. CheckSame), the PrintFoo (eg. PrintMatch).

$ git grep -E -c "[a-zA-Z]+ [a-z]+[A-Z][a-zA-Z]+\(" fcefe03bf94005e045499ed6650212cd1e9bed01 llvm/include/llvm/Support/FileCheck.h
fcefe03bf94005e045499ed6650212cd1e9bed01:llvm/include/llvm/Support/FileCheck.h:7
$ git grep -E -c "[a-zA-Z]+ [a-z]+[A-Z][a-zA-Z]+\(" fcefe03bf94005e045499ed6650212cd1e9bed01 llvm/lib/Support/FileCheck.cpp
<no result>

$ git grep -E -c "[a-zA-Z]+ [A-Z][a-z]+[A-Z][a-zA-Z]+\(" fcefe03bf94005e045499ed6650212cd1e9bed01 llvm/include/llvm/Support/FileCheck.h
fcefe03bf94005e045499ed6650212cd1e9bed01:llvm/include/llvm/Support/FileCheck.h:17
$ git grep -E -c "[a-zA-Z]+ [A-Z][a-z]+[A-Z][a-zA-Z]+\(" fcefe03bf94005e045499ed6650212cd1e9bed01 llvm/lib/Support/FileCheck.cpp
fcefe03bf94005e045499ed6650212cd1e9bed01:llvm/lib/Support/FileCheck.cpp:13

Do you still want me to fix that?

209–213

My same concern applies here: I can easily "reinterpret_cast" to a uint64_t parameter when calling the constructor and pass an extra Signed parameter but then to do signed arithmetic I cannot think of an *easy* way to reinterpret it back into an int64_t without tripping on undefined or implementation defined behaviour.

294–299

I can't remember now except that I needed it at some point. It is clearly not needed now, maybe as a result of having the known phase info. Anyway, merged into one.

[jhenderson]

For some reason the new diff has lost all of the inline comments...

I was following what is done for the Check enum. Should that enum be changed (in a separate patch)?

Yes, probably.

The FileCheck prefix was added when FileCheck logic was moved into a library. See comment from Bogner in https://reviews.llvm.org/D50283

Ah, I hadn't noticed that it had moved to Support. Okay, this is fine as is.

There are actually more examples of camel-case starting with capital letter: all the CheckFoo (eg. CheckSame), the PrintFoo (eg. PrintMatch).

$ git grep -E -c "[a-zA-Z]+ [a-z]+[A-Z][a-zA-Z]+\(" fcefe03bf94005e045499ed6650212cd1e9bed01 llvm/include/llvm/Support/FileCheck.h
fcefe03bf94005e045499ed6650212cd1e9bed01:llvm/include/llvm/Support/FileCheck.h:7
$ git grep -E -c "[a-zA-Z]+ [a-z]+[A-Z][a-zA-Z]+\(" fcefe03bf94005e045499ed6650212cd1e9bed01 llvm/lib/Support/FileCheck.cpp
<no result>

$ git grep -E -c "[a-zA-Z]+ [A-Z][a-z]+[A-Z][a-zA-Z]+\(" fcefe03bf94005e045499ed6650212cd1e9bed01 llvm/include/llvm/Support/FileCheck.h
fcefe03bf94005e045499ed6650212cd1e9bed01:llvm/include/llvm/Support/FileCheck.h:17
$ git grep -E -c "[a-zA-Z]+ [A-Z][a-z]+[A-Z][a-zA-Z]+\(" fcefe03bf94005e045499ed6650212cd1e9bed01 llvm/lib/Support/FileCheck.cpp
fcefe03bf94005e045499ed6650212cd1e9bed01:llvm/lib/Support/FileCheck.cpp:13

Do you still want me to fix that?

As there are already a mixture, we should follow the LLVM style for the new code, especially given the amount of new code being added. If it was all a different style there might be a different case to be made.

---

I definitely think that you need to fragment this up into small incremental patches, as I've found I'm not getting enough time to digest the whole thing at once (and I'm guessing the same goes for other reviewers). If you could try to find incremental ways of doing things that would be great. One example would be to add the command-line switches as non-functional switches first (make them hidden until you're ready for them to be published), then incrementally add features (and expand testing) to them. Similarly accepting some forms of the pattern etc could be done in one change (but do nothing with them) and then add more functionality over time.

llvm/include/llvm/Support/FileCheck.h

109 ↗

(On Diff #183612)

Nit: ie -> i.e.

129 ↗

(On Diff #183612)

Nit: other -> Other

174–177 ↗

(On Diff #183612)

Why not make these member functions? I.e:

FileCheckNumExprVal operator+(const FileChcekNumExprVal &Other);
FileCheckNumExprVal operator-(const FileChcekNumExprVal &Other);

Also Nit: lhs/rhs should be LHS/RHS (but this is moot if switching to member operators).

191 ↗

(On Diff #183612)

Nit: overriden -> overridden.

205–208 ↗

(On Diff #183612)

My same concern applies here: I can easily "reinterpret_cast" to a uint64_t parameter when calling the constructor and pass an extra Signed parameter but then to do signed arithmetic I cannot think of an *easy* way to reinterpret it back into an int64_t without tripping on undefined or implementation defined behaviour.

Okay, fair enough. I wonder if they could be templated then instead? I.e:

template <typename T> FileCheckNumExprLiteral(T Val) : Value(Val) {}

Also, should these be explicit, or are you deliberately allowing implicit conversions?

221–223 ↗

(On Diff #183612)

The second sentence is hard to parse. Could you maybe break it up into the different bits, as separate sentences?

226 ↗

(On Diff #183612)

Nit: eg. -> e.g.

245 ↗

(On Diff #183612)

is -> is alive.

264 ↗

(On Diff #183612)

correspond -> corresponds

[thopre]

In D49084#1384876, @jhenderson wrote:

I definitely think that you need to fragment this up into small incremental patches, as I've found I'm not getting enough time to digest the whole thing at once (and I'm guessing the same goes for other reviewers). If you could try to find incremental ways of doing things that would be great. One example would be to add the command-line switches as non-functional switches first (make them hidden until you're ready for them to be published), then incrementally add features (and expand testing) to them. Similarly accepting some forms of the pattern etc could be done in one change (but do nothing with them) and then add more functionality over time.

Done in patch series starting from https://reviews.llvm.org/D60381. Thus closing this revision. I've just noticed there's a few of your comments (casing of function notably) I haven't incorporated in the new patch series. I'll address them now.

docs/CommandGuide/FileCheck.rst

 register will be allowed.
 
 Because regular expressions are enclosed with double braces, they are
 visually distinct, and you don't need to use escape characters within the double
 braces like you would in C.  In the rare case that you want to match double
 braces explicitly from the input, you can use something ugly like
 ``{{[{][{]}}`` as your pattern.
 
-FileCheck Variables
+FileCheck Pattern Variables
 ~~~~~~~~~~~~~~~~~~~
 
 It is often useful to match a pattern and then verify that it occurs again
 later in the file.  For codegen tests, this can be useful to allow any register,
 but verify that that register is used consistently later.  To do this,
 :program:`FileCheck` allows named variables to be defined and substituted into
 patterns.  Here is a simple example:
 

 
 If ``--enable-var-scope`` is in effect, variables with names that
 start with ``$`` are considered to be global. All others variables are
 local.  All local variables get undefined at the beginning of each
 CHECK-LABEL block. Global variables are not affected by CHECK-LABEL.
 This makes it easier to ensure that individual tests are not affected
 by variables set in preceding tests.
 
-FileCheck Expressions
+FileCheck Numeric Variables and Expressions
 ~~~~~~~~~~~~~~~~~~~~~
 
-Sometimes there's a need to verify output which refers line numbers of the
+:program:`FileCheck` also allows to search for values satisfying a numeric
+expression constraint and define numeric variables accordingly.  The numeric
+variables can themselves be used inside following numeric expressions.  This
+allows to capture numeric relations between two numbers in a text to check,
+such as the need for consecutive registers to be used.
+
+The syntax for numeric expression is
+``[[#%<fmtspec>,<NUMVAR>: <constraint> <expr>]]`` where:
+* ``%<fmtspec>`` is an optional printf-style matching format specifier to
+  indicate what string representation the value to match should have (eg. hex
+  number) and conversely how to interpret a matched value into a value when
+  defining a numeric variable without a constraint expression (see below).
+  Currently accepted format specifier are ``%u``, ``%d``, ``%x`` and ``%X``.
+  If absent, the format specifier is inferred from the matching format of the
+  numeric variable(s) used by the expression constraint if any and they are all
+  the same, and default to ``%u`` if no numeric variable is used.  In case of
+  conflict between matching format of several numeric variables the format
+  specifier is mandatory.
+* ``NUMVAR`` is an optional numeric variable to define to the value satisfying
+  the constraint.
+* ``<constraint>`` is the matching constraint describing how the value to match
+  must relate to the value of the numeric expression. The only currently
+  accepted constraint is ``==`` for an exact match and is the default if
+  ``<constraint>`` is not provided.
+* ``<expr>>`` is a numeric expression whose operands are either numeric
+  variables previously defined using the above syntax or a integer immediates.
+  Currently supported numeric operations are ``+`` and ``-``.
+
+For example:
+
+.. code-block:: llvm
+
+    ; CHECK: add r[[#REG:]], [[#REG]], [[#REG+1]]
+    ; CHECK: copying from [[#%x,ADDR:] to [[#ADDR + 8]]
+
+In the same way as for pattern variables, ``--enable-var-scope`` only consider
+global numeric variables that start with ``$`` and undefined local variables at
+the beginning of each CHECK-LABEL block.
+
+Important note: In its current implementation, a numeric expression using
+numeric variable defined on the same line can fail to match even though an
+input line satisfies it.  This happens when there is more than one possible
+match when ignoring the constraint and considering only the matching format
+(ie. matching an unsigned number with [[:digit:]]+ and the first match does not
+satisfy the constraint.  This is due to those numeric expressions constraints
+not being able to be expressed at the regular expression level and the regular
+expression engine not offering the possibility of getting all possible matches.
+
+FileCheck Pseudo Numeric Variables
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Sometimes there's a need to verify output which contain line numbers of the
 match file, e.g. when testing compiler diagnostics.  This introduces a certain
 fragility of the match file structure, as "``CHECK:``" lines contain absolute
 line numbers in the same file, which have to be updated whenever line numbers
 change due to text addition or deletion.
 
-To support this case, FileCheck allows using ``[[@LINE]]``,
-``[[@LINE+<offset>]]``, ``[[@LINE-<offset>]]`` expressions in patterns. These
-expressions expand to a number of the line where a pattern is located (with an
-optional integer offset).
+To support this case, FileCheck understands the ``@LINE`` pseudo numeric
+variable which evaluate to the line number of the CHECK pattern where it is
+found.
 
 This way match patterns can be put near the relevant test lines and include
 relative line number references, for example:
 
 .. code-block:: c++
 
-   // CHECK: test.cpp:[[@LINE+4]]:6: error: expected ';' after top level declarator
+   // CHECK: test.cpp:[[# @LINE + 4]]:6: error: expected ';' after top level declarator
    // CHECK-NEXT: {{^int a}}
    // CHECK-NEXT: {{^     \^}}
    // CHECK-NEXT: {{^     ;}}
    int a
 
+To support legacy uses of ``@LINE`` as a special pattern variable,
+:program:`FileCheck` also accepts the following uses of ``@LINE`` with pattern
+variable syntax: ``[[@LINE]]``, ``[[@LINE+<offset>]]`` and
+``[[@LINE-<offset>]]`` where ``offset`` is an integer immediate.
+
 Matching Newline Characters
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
 To match newline characters in regular expressions the character class
 ``[[:space:]]`` can be used. For example, the following pattern:
 
 .. code-block:: c++
 

include/llvm/Support/FileCheck.h

struct FileCheckRequest {
   bool AllowEmptyInput = false;
   bool MatchFullLines = false;
   bool EnableVarScope = false;
   bool AllowDeprecatedDagOverlap = false;
   bool Verbose = false;
   bool VerboseVerbose = false;
 };
 
+//===----------------------------------------------------------------------===//
+// Numeric expression handling Code.
+//===----------------------------------------------------------------------===//
+
+struct FileCheckNumExprFmtType;
+
+/// Bitfield representing the format a numeric expression value should be
+/// printed into for matching.  Used to represent both explicit format
+/// specifiers as well as implicit format from using numeric variables.
+struct FileCheckNumExprFmtType {
+  /// Value is signed.
+  unsigned Signed : 1;
+  /// Value should be print as hex number.
+  unsigned Hex : 1;
+  /// Capital case, only used for hex numbers.
+  unsigned Cap : 1;
+
+  /// When 0, absence of format, eg. for literals in an expression.
+  unsigned Set : 1;
+
+  /// Several conflicting implicit formats in an expression.
+  unsigned Conflict : 1;
+
+  /// Define format equality: formats are equal if all bits are identical.
+  bool operator==(const struct FileCheckNumExprFmtType &other);
+  bool operator!=(const struct FileCheckNumExprFmtType &other) {
+    return !(*this == other);
+  }
+};
+
+/// Initializer for numeric expression without format.
+const struct FileCheckNumExprFmtType FmtNone = {0, 0, 0, 0, 0};
+/// Initializer for numeric expression matched as unsigned value.
+const struct FileCheckNumExprFmtType FmtUnsigned = {0, 0, 0, 1, 0};
+/// Initializer for numeric expression matched as signed value.
+const struct FileCheckNumExprFmtType FmtSigned = {1, 0, 0, 1, 0};
+/// Initializer for numeric expression matched as lower case hex value.
+const struct FileCheckNumExprFmtType FmtLowHex = {0, 1, 0, 1, 0};
+/// Initializer for numeric expression matched as capital case hex value.
+const struct FileCheckNumExprFmtType FmtCapHex = {0, 1, 1, 1, 0};
+
+namespace Check {
+/// Phases of FileCheck.  Used to determine at what phase is a numeric
+/// expression (and thus value of any potential variable defined by it)
+/// available.
+enum FileCheckPhase {
+  /// Parsing the CHECK pattern.
+  ParsePhase = 0,
+  /// Pattern substitution and actual regex matching
+  MatchPhase,
+  /// Constraint check done for numeric expression just after match phase.
+  CheckPhase
+};
+} // namespace Check
+
+/// Class representing a numeric expression's value.  Used to be able to store
+/// and return both signed and unsigned value.
+class FileCheckNumExprVal {
+private:
+  /// Signed value.
+  int64_t SVal;
+
+  /// Unsigned value.
+  uint64_t UVal;
+
+  /// Whether value is signed (and thus is stored in SVal) or not (in which
+  /// case it is stored in UVal).
+  bool Signed;
+
+  /// Whether this holds an actual value.  Examples of where this would be
+  /// false include:
+  /// - underflow or overflow of one of the binary operation in the expression
+  /// - value of undefined variable
+  bool Valid;
+
+  /// Whether this is a tentative value.  True if any of the operand involved
+  /// in its computation had a tentative value.
+  bool Tentative;
+
+public:
+  /// Constructor for an invalid value.
+  FileCheckNumExprVal() : Valid(false) {}
+
+  /// Constructor for a signed value.
+  FileCheckNumExprVal(int64_t Val)
+      : SVal(Val), Signed(true), Valid(true), Tentative(false) {}
+
+  /// Constructor for an unsigned value.
+  FileCheckNumExprVal(uint64_t Val)
+      : UVal(Val), Signed(false), Valid(true), Tentative(false) {}
+
+  /// Define how to compare value.  Used to decide whether a matched numeric
+  /// value satisfies its corresponding numeric expression.
+  bool operator==(const FileCheckNumExprVal &other);
+  bool operator!=(const FileCheckNumExprVal &other) {
+    return !(*this == other);
+  }
+
+  /// Whether value is signed.
+  bool IsSigned() const { return Signed; }
+
+  /// Whether value is valid.
+  bool IsValid() const { return Valid; }
+
+  /// Whether value is tentative.
+  bool IsTentative() const { return Tentative; }
+
+  /// Return the signed value.  Must only be called if value is signed in the
+  /// first place.
+  int64_t GetSignedValue() const { return SVal; }
+
+  /// Return the unsigned value.  Must only be called if value is unsigned in
+  /// the first place.
+  uint64_t GetUnsignedValue() const { return UVal; }
+
+  /// Mark value as tentative.
+  bool ToggleTentative() { return Tentative = !Tentative; }
+
+  /// Convert value to a signed value, or mark value invalid if not possible
+  /// (original value was not within range for a signed integer).
+  void ConvertSigned();
+
+  /// Convert value to an unsigned value, or mark value invalid if not possible
+  /// (original value was not within range for an unsigned integer).
+  void ConvertUnsigned();
+
+  /// Store in \p StringRepr a string representation of this value given the
+  /// matching format \p Fmt.  Return whether value had no such a string
+  /// representation (true if value is invalid).
+  bool GetStringRepr(struct FileCheckNumExprFmtType Fmt,
+                     std::string &StringRepr) const;
+
+  /// Perform an addition operation.  Return an invalid value in case of
+  /// underflow or overflow.
+  static FileCheckNumExprVal Add(const FileCheckNumExprVal &Op1,
+                                 const FileCheckNumExprVal &Op2);
+
+  /// Perform a substraction operation.  Return an invalid value in case of
+  /// underflow or overflow.
+  static FileCheckNumExprVal Sub(const FileCheckNumExprVal &Op1,
+                                 const FileCheckNumExprVal &Op2);
+};
+
+/// Base class representing the AST of a given numeric expression.  Only used
+/// for AST node of unknown type.  All actual nodes are of another type.
+class FileCheckNumExprAST {
+public:
+  virtual ~FileCheckNumExprAST() = default;
+
+  /// Evaluate the value of the expression represented by this AST.  Return in
+  /// \p Fmt the implicit conversion that applies from any variable used or
+  /// null if no variable is used by the expression.  This method must be
+  /// overrided in all subclasses.
+  virtual FileCheckNumExprVal Eval(struct FileCheckNumExprFmtType &Fmt) = 0;
+
+  /// Append names of undefined variables used in the expression represented by
+  /// this AST.  Must be overrided in any subclass representing an expression
+  /// that can contain a variable.
+  virtual void GetUndefVarNames(std::vector<StringRef> &UndefVarNames) const {}
+};
+
+/// Class representing a litteral, either in the AST of a numeric expression or
+/// in the result of the evaluation of such an expression.
+class FileCheckNumExprLiteral : public FileCheckNumExprAST {
+private:
+  /// Actual value of the literal.
+  FileCheckNumExprVal Value;
+
+public:
+  /// Constructor for a signed literal.
+  FileCheckNumExprLiteral(int64_t Val) : Value(Val) {}
+
+  /// Constructor for an unsigned literal.
+  FileCheckNumExprLiteral(uint64_t Val) : Value(Val) {}
+
+  /// Evaluate the value of this literal.  Therefore returns this node itself
+  /// and set \p Fmt to null since literals do not carry any implicit
+  /// conversion.
+  FileCheckNumExprVal Eval(struct FileCheckNumExprFmtType &Fmt);
+};
+
+/// Class representing a numeric expression and its matching format.
+class FileCheckNumExpr {
+private:
+  /// Pointer to AST of the numeric expression.
+  std::shared_ptr<FileCheckNumExprAST> AST;
+
+  /// Value of the numeric expression.  Set either from evaluating the AST if
+  /// any and using only variable defined on previous CHECK line, or from the
+  /// matched value if constraint is satisfied.
+  FileCheckNumExprVal Value;
+
+  /// Matching format.
+  struct FileCheckNumExprFmtType Fmt;
+
+  /// FileCheck phase when this numeric expression can be evaluated.
+  enum Check::FileCheckPhase KnownPhase;
+
+public:
+  /// Generic constructor for a numeric expression whose equality constraint is
+  /// represented by \p AST, matching format is \p Fmt and whose AST can be
+  /// evaluated in phase \p KnownPhase.
+  FileCheckNumExpr(std::shared_ptr<FileCheckNumExprAST> AST,
+                   struct FileCheckNumExprFmtType Fmt,
+                   enum Check::FileCheckPhase KnownPhase);
+
+  /// Constructor for numeric expression with a known value in parse phase,
+  /// eg. the numeric expression defining the @LINE numeric variable (and
+  /// currently only used for that).
+  FileCheckNumExpr(FileCheckNumExprVal Value,
+                   struct FileCheckNumExprFmtType Fmt);
+
+  /// Return pointer to AST of the numeric expression.  Pointed-to AST is
+  /// managed by a shared_ptr and is guaranteed live as long as this object is.
+  FileCheckNumExprAST *GetAST() const { return AST.get(); }
+
+  /// Return the matched value for the expression.
+  FileCheckNumExprVal GetValue() const { return Value; }
+
+  /// Set Value to \p Val if currently invalid or tentative.  Return whether
+  /// Value failed to be set (Value was already valid and final).
+  bool SetTentativeValue(FileCheckNumExprVal Val);
+
+  /// Return matching format of the expression.
+  struct FileCheckNumExprFmtType GetFormat() const {
+    return Fmt;
+  }
+
+  /// Return at what FileCheck phase can this expression can be evaluated.
+  enum Check::FileCheckPhase GetKnownPhase() { return KnownPhase; }
+
+  /// Store in \p Val the value corresponding to string representation
+  /// \p StrVal according to matching format of this numeric expression.
+  /// Return whether \p StrVal correspond to a valid and representable value.
+  bool ValueFromStringRepr(StringRef StrVal, FileCheckNumExprVal &Val) const;
+
+  /// Store in \p ValueStringRepr the string representation of Value given the
+  /// matching format of this numeric expression.  Return whether Value does
+  /// not have a string representation (Value is invalid).
+  bool GetValueStringRepr(std::string &ValueStringRepr) const {
+    return Value.GetStringRepr(Fmt, ValueStringRepr);
+  }
+
+  /// Store in \p MatchString the regexp pattern to use to match this
+  /// numeric expression given its matching format.  Return whether the
+  /// function was unable to determine the regexp pattern.
+  bool GetMatchString(enum Check::FileCheckPhase Phase,
+                      std::string &MatchString);
+
+  /// Verify that the matched value in \p MatchedValue satisfies the constraint
+  /// expressed by this expression.  Return true if constraint is not
+  /// satisfied.
+  bool VerifyConstraint(FileCheckNumExprVal MatchedValue) const;
+
+  /// Store in \p EvaluatedValue the value evaluated from the constraint of
+  /// this numeric expression.  Return whether evaluation failed.
+  bool Eval(FileCheckNumExprVal &EvaluatedValue) const;
+
+  /// Set Value from the result of calling Eval().  Return whether it failed.
+  bool SetValueFromEval();
+
+  /// Mark value as final.  Return whether value was already final.
+  bool CommitValue();
+};
+
+/// Class representing a numeric variable with a given value in the AST of a
+/// numeric expression.  Each definition of a variable gets its own instance
+/// of this class, uses share the same instance as the respective definition.
+class FileCheckNumExprVar : public FileCheckNumExprAST {
+private:
+  /// Name of the numeric variable.
+  StringRef Name;
+
+  /// Pointer to numeric expression defining this numeric variable.  Only null
+  /// if variable used but not defined.  If numeric expression is empty NumExpr
+  /// points to a FileCheckNumExpr with a null AST.
+  std::shared_ptr<FileCheckNumExpr> NumExpr;
+
+  /// Line number where this variable is defined.  Used to determine whether a
+  /// variable is defined on the same line as a given use.
+  unsigned DefLineNumber;
+
+public:
+  /// Constructor for an undefined variable \p Name.
+  FileCheckNumExprVar(StringRef Name)
+      : Name(Name), NumExpr(nullptr), DefLineNumber(0) {}
+
+  /// Constructor for a variable \p Name defined at line \p DefLineNumber.
+  FileCheckNumExprVar(StringRef Name, unsigned DefLineNumber)
+      : Name(Name), NumExpr(nullptr), DefLineNumber(DefLineNumber) {}
+
+  /// Constructor for numeric variable \p Name with a known \p Value at parse
+  /// time (eg. the @LINE numeric variable).  Matching format of the variable
+  /// is given in \p Fmt and \p DefLineNumber indicates when does this variable
+  /// starts to be defined.
+  FileCheckNumExprVar(StringRef Name, FileCheckNumExprVal Value,
+                      struct FileCheckNumExprFmtType Fmt,
+                      unsigned DefLineNumber);
+
+  /// Return name of that numeric variable.
+  StringRef GetName() const { return Name; }
+
+  /// Return pointer to the numeric expression defining this numeric variable.
+  FileCheckNumExpr *GetNumExpr() const { return NumExpr.get(); }
+
+  /// Return line number where this variable is defined.
+  unsigned GetDefLineNumber() { return DefLineNumber; }
+
+  /// Set pointer to numeric expression defining this numeric variable.
+  void SetNumExpr(std::shared_ptr<FileCheckNumExpr> NumExpr) {
+    this->NumExpr = NumExpr;
+  }
+
+  /// Evaluate the value of this numeric variable.  Therefore returns the value
+  /// and implicit conversion of this numeric variable stored in its
+  /// corresponding numeric expression class.
+  FileCheckNumExprVal Eval(struct FileCheckNumExprFmtType &Fmt);
+
+  /// Append numeric variable's name to UndefVarNames if undefined.
+  void GetUndefVarNames(std::vector<StringRef> &UndefVarNames) const;
+};
+
+/// Type of functions evaluating a given binary operation.
+using binop_eval_t = FileCheckNumExprVal (*)(const FileCheckNumExprVal &,
+                                             const FileCheckNumExprVal &);
+
+/// Class representing a single binary operation in the AST of a numeric
+/// expression.
+class FileCheckASTBinop : public FileCheckNumExprAST {
+private:
+  /// Left operand.
+  std::shared_ptr<FileCheckNumExprAST> Opl;
+
+  /// Right operand.
+  std::shared_ptr<FileCheckNumExprAST> Opr;
+
+  /// Pointer to function that can evaluate this binary operation.
+  binop_eval_t EvalBinop;
+
+public:
+  FileCheckASTBinop(binop_eval_t EvalBinop,
+                    std::shared_ptr<FileCheckNumExprAST> OperandLeft,
+                    std::shared_ptr<FileCheckNumExprAST> OperandRight)
+      : Opl(OperandLeft), Opr(OperandRight), EvalBinop(EvalBinop) {}
+
+  /// Evaluate the value of the binary operation represented by this AST.  Uses
+  /// EvalBinop to perform the binary operation on the values of recursively
+  /// evaluating the left and right operands.
+  FileCheckNumExprVal Eval(struct FileCheckNumExprFmtType &Fmt);
+
+  /// Append to UnderVarNames the names of undefined numeric variables used in
+  /// any of the operands.
+  void GetUndefVarNames(std::vector<StringRef> &UndefVarNames) const;
+};
+
+class FileCheckPatternContext;
+
+/// Class representing a substitution to perform in the string to match, either
+/// a pattern variable to replace by its value or a numeric expression to
+/// replace by an appropriate wildcard pattern.
+class FileCheckPatternSubst {
+private:
+  /// Pointer to a class instance holding among other thing the table with the
+  /// values of live pattern variables at the start of any given CHECK line.
+  /// Used for substituting pattern variables (numeric variables have their
+  /// value in the FileCheckNumExpr class instance pointed to by NumExpr).
+  FileCheckPatternContext *Context;
+
+  /// Whether this represents a numeric expression substitution.
+  bool isNumExpr;
+
+  /// The string that needs to be substituted for something else.  For a
+  /// pattern variable this is its name, otherwise this is the whole numeric
+  /// expression.
+  StringRef SubstStr;
+
+  /// If this is a numeric expression substitution, this is the pointer to the
+  /// class representing that numeric expression.
+  std::shared_ptr<FileCheckNumExpr> NumExpr;
+
+  // Index in RegExStr of where to do the substitution.
+  unsigned InsertIdx;
+
+public:
+  /// Constructor for a pattern variable substitution.
+  FileCheckPatternSubst(FileCheckPatternContext *Context, StringRef VarName,
+                        unsigned InsertIdx)
+      : Context(Context), isNumExpr(false), SubstStr(VarName),
+        InsertIdx(InsertIdx) {}
+
+  /// Constructor for a numeric expression substitution.
+  FileCheckPatternSubst(FileCheckPatternContext *Context, StringRef Expr,
+                        std::shared_ptr<FileCheckNumExpr> NumExpr,
+                        unsigned InsertIdx)
+      : Context(Context), isNumExpr(true), SubstStr(Expr), NumExpr(NumExpr),
+        InsertIdx(InsertIdx) {}
+
+  /// Return whether this is a numeric expression substitution.
+  bool IsNumExpr() const { return isNumExpr; }
+
+  /// Return the string to be substituted.
+  StringRef GetSubstString() const { return SubstStr; }
+
+  /// Return the index where the substitution is to be performed.
+  unsigned GetIndex() const { return InsertIdx; }
+
+  /// Perform in \p SubstValue the substitution represented by this class
+  /// instance.  For a numeric variable we replace it by its value if known at
+  /// match time or a suitable wildcard pattern otherwise.  For a pattern
+  /// variable we simply replace it by the text its definition matched.
+  /// Return whether substitution failed.
+  bool Substitute(std::string &SubstValue) const;
+
+  /// Write in \p MatchedValue the value successfully matched (ie. constraint
+  /// is verified for a numeric expression) by the substitution.  Return
+  /// whether match failed for that substitution.
+  bool MatchedValue(std::string &MatchedValue) const;
+
+  /// Append to UnderVarNames the names of undefined pattern or numeric
+  /// variables used in this substitution.
+  void GetUndefVarNames(std::vector<StringRef> &UndefVarNames) const;
+};
 
 //===----------------------------------------------------------------------===//
 // Pattern Handling Code.
 //===----------------------------------------------------------------------===//
 
 namespace Check {
 
 enum FileCheckKind {
public:
 
   operator FileCheckKind() const { return Kind; }
 
   int getCount() const { return Count; }
   FileCheckType &setCount(int C);
 
   std::string getDescription(StringRef Prefix) const;
 };
-}
+} // namespace Check
+
+/// Structure representing the definition of a numeric variable in a pattern.
+/// It holds the parenthesized capture number and the pointer to the class
+/// representing the numeric expression and its matching format.
+struct FileCheckNumExprMatch {
+  /// Pointer to class representing the numeric expression and its matching
+  /// format.
+  std::shared_ptr<FileCheckNumExpr> NumExpr;
+
+  /// Parenthesized capture number for this numeric expression
+  unsigned CaptureParen;
+};
+
+/// Class holding the FileCheckPattern global state, shared by all patterns:
+/// tables holding values of variables and whether they are defined or not at
+/// any given time in the matching process.
+class FileCheckPatternContext {
+  friend class FileCheckPattern;
+
+private:
+  /// When matching a given pattern, this holds the value of all the FileCheck
+  /// pattern variables defined in previous patterns.  In a pattern only the
+  /// last definition for a given variable is recorded in this table,
+  /// back-references are used for uses after any the other definition.
+  StringMap<StringRef> GlobalVariableTable;
+
+  /// Map of all pattern variables defined so far.  Used at parse time to
+  /// detect a name conflict between a numeric variable and a pattern variable
+  /// when the former is defined on a later line than the latter.
+  StringMap<bool> DefinedVariableTable;
+
+  /// When matching a given pattern, this holds the pointers to the classes
+  /// representing the AST of all numeric variables defined in previous
+  /// patterns along with their values.  In a pattern only the last definition
+  /// for a given variable is recorded in this table.  When matching a pattern
+  /// all definitions for that pattern are recorded in NumericVariableDefs
+  /// table.
+  StringMap<std::shared_ptr<FileCheckNumExprVar>> GlobalNumericVariableTable;
+
+public:
+  /// Store in \p VarValue the value of pattern variable \p VarName.
+  bool GetPatternVarValue(StringRef VarName, StringRef &VarValue);
+
+  /// Define pattern and numeric variables from definitions given on the
+  /// command line passed as a vector of VAR=VAL strings in \p CmdlineDefines.
+  /// Report any error to \p SM.
+  bool DefineCmdlineVariables(std::vector<std::string> &CmdlineDefines,
+                              SourceMgr &SM);
+
+  /// Undefine local variables (variables whose name does not start with a '$'
+  /// sign), ie remove them from GlobalVariableTable.
+  void ClearLocalVars(void);
+};
 
 struct FileCheckDiag;
 
 class FileCheckPattern {
   SMLoc PatternLoc;
 
   /// A fixed string to match as the pattern or empty if this pattern requires
   /// a regex match.
   StringRef FixedStr;
 
   /// A regex string to match as the pattern or empty if this pattern requires
   /// a fixed string to match.
   std::string RegExStr;
 
-  /// Entries in this vector map to uses of a variable in the pattern, e.g.
-  /// "foo[[bar]]baz".  In this case, the RegExStr will contain "foobaz" and
-  /// we'll get an entry in this vector that tells us to insert the value of
-  /// bar at offset 3.
-  std::vector<std::pair<StringRef, unsigned>> VariableUses;
+  /// Entries in this vector represent uses of a pattern variable or a numeric
+  /// expression in the pattern that need to be substituted in the regexp
+  /// pattern at match time, e.g. "foo[[bar]]baz[[#N+1]]".  In this case, the
+  /// RegExStr will contain "foobaz" and we'll get two entries in this vector
+  /// that tells us to insert the value of pattern variable "bar" at offset 3
+  /// and the value of numeric expression "N+1" at offset 6.  Uses are
+  /// represented by a FileCheckPatternSubst class to abstract whether it is a
+  /// pattern variable or a numeric expression.
+  std::vector<FileCheckPatternSubst> MatchSubsts;
+
+  /// Entries in this vector represent any use of a pattern variable or a
+  /// numeric expression in the pattern.  Substitution are represented in the
+  /// same way as in MatchSubsts above.
+  std::vector<FileCheckPatternSubst> AllSubsts;
 
-  /// Maps definitions of variables to their parenthesized capture numbers.
+  /// Maps names of pattern variables defined in a pattern to the parenthesized
+  /// capture numbers of their last definition.
+  ///
+  /// E.g. for the pattern "foo[[bar:.*]]baz[[bar]]quux[[bar:.*]]",
+  /// VariableDefs will map "bar" to 2 corresponding to the second definition
+  /// of "bar".
   ///
-  /// E.g. for the pattern "foo[[bar:.*]]baz", VariableDefs will map "bar" to
-  /// 1.
+  /// Note: uses std::map rather than StringMap to be able to get the key when
+  /// iterating over values.
   std::map<StringRef, unsigned> VariableDefs;
 
+  /// Holds the capture parentheses number and pointer to corresponding
+  /// FileCheckNumExpr class instance of all numeric expressions whose matching
+  /// result must be captured, that is numeric expressions with a variable
+  /// definition or using numeric variable defined on the same line.  Used to
+  /// record the matched value of all those expressions and for those with a
+  /// constraint to check that the matched value satisfies it.
+  std::vector<FileCheckNumExprMatch> CapturedNumericExpressions;
+
+  /// Pointer to a class instance holding the global state shared by all
+  /// patterns:
+  /// - tables with the values of live pattern and numeric variables at
+  ///   the start of any given CHECK line;
+  /// - table holding whether a pattern variable has been defined at any given
+  ///   point during the parsing phase.
+  FileCheckPatternContext *Context;
+
   Check::FileCheckType CheckTy;
 
-  /// Contains the number of line this pattern is in.
+  /// Line number for this CHECK pattern.  Used to determine whether a variable
+  /// definition is made on an earlier line to the one with this CHECK.
   unsigned LineNumber;
 
 public:
-  explicit FileCheckPattern(Check::FileCheckType Ty)
-      : CheckTy(Ty) {}
+  explicit FileCheckPattern(Check::FileCheckType Ty,
+                            FileCheckPatternContext *Context)
+      : Context(Context), CheckTy(Ty) {}
 
   /// Returns the location in source code.
   SMLoc getLoc() const { return PatternLoc; }
 
+  /// Returns the pointer to the global state for all patterns in this
+  /// FileCheck instance.
+  FileCheckPatternContext *GetContext() const { return Context; }
+
+  bool ParseVariable(StringRef Str, bool &IsPseudo, unsigned &TrailIdx) const;
+  std::shared_ptr<FileCheckNumExpr>
+  ParseNumericExpression(StringRef Expr,
+                         std::shared_ptr<FileCheckNumExprVar> &NumVarDef,
+                         const SourceMgr &SM) const;
   bool ParsePattern(StringRef PatternStr, StringRef Prefix, SourceMgr &SM,
                     unsigned LineNumber, const FileCheckRequest &Req);
-  size_t Match(StringRef Buffer, size_t &MatchLen,
-               StringMap<StringRef> &VariableTable) const;
-  void PrintVariableUses(const SourceMgr &SM, StringRef Buffer,
-                         const StringMap<StringRef> &VariableTable,
-                         SMRange MatchRange = None) const;
+  size_t Match(StringRef Buffer, size_t &MatchLen, const SourceMgr &SM) const;
+  void PrintSubsts(const SourceMgr &SM, StringRef Buffer,
   void PrintFuzzyMatch(const SourceMgr &SM, StringRef Buffer,
-                       const StringMap<StringRef> &VariableTable,
                        std::vector<FileCheckDiag> *Diags) const;
 
   bool hasVariable() const {
-    return !(VariableUses.empty() && VariableDefs.empty());
+    return !(AllSubsts.empty() && VariableDefs.empty());
   }
 
   Check::FileCheckType getCheckTy() const { return CheckTy; }
 
   int getCount() const { return CheckTy.getCount(); }
 
 private:
   bool AddRegExToRegEx(StringRef RS, unsigned &CurParen, SourceMgr &SM);
   void AddBackrefToRegEx(unsigned BackrefNum);
-  unsigned
-  ComputeMatchDistance(StringRef Buffer,
-                       const StringMap<StringRef> &VariableTable) const;
-  bool EvaluateExpression(StringRef Expr, std::string &Value) const;
+  unsigned ComputeMatchDistance(StringRef Buffer) const;
   size_t FindRegexVarEnd(StringRef Str, SourceMgr &SM);
+
+  /// Numeric expression parsing helpers.
+  std::shared_ptr<FileCheckNumExprVar>
+  ParseNumericVariable(StringRef &Expr, bool IsDefinition,
+                       const SourceMgr &SM) const;
+  std::shared_ptr<FileCheckNumExprAST>
+  ParseNumericOperand(StringRef &Expr, const SourceMgr &SM,
+                      struct FileCheckNumExprFmtType &ImplicitFmt,
+                      enum Check::FileCheckPhase &KnownPhase) const;
+  std::shared_ptr<FileCheckNumExprAST>
+  ParseFileCheckBinop(StringRef &Expr, std::shared_ptr<FileCheckNumExprAST> Opl,
+                      const SourceMgr &SM,
+                      struct FileCheckNumExprFmtType &ImplicitFmt,
+                      enum Check::FileCheckPhase &KnownPhase) const;
+  std::shared_ptr<FileCheckNumExpr>
+  ParseLegacyNumericExpression(StringRef Expr, StringRef Name,
+                               StringRef Trailer, const SourceMgr &SM) const;
 };
 
 //===----------------------------------------------------------------------===//
 /// Summary of a FileCheck diagnostic.
 //===----------------------------------------------------------------------===//
 
 struct FileCheckDiag {
   /// What is the FileCheck directive for this diagnostic?
struct FileCheckString {
   /// All of the strings that are disallowed from occurring between this match
   /// string and the previous one (or start of file).
   std::vector<FileCheckPattern> DagNotStrings;
 
   FileCheckString(const FileCheckPattern &P, StringRef S, SMLoc L)
       : Pat(P), Prefix(S), Loc(L) {}
 
   size_t Check(const SourceMgr &SM, StringRef Buffer, bool IsLabelScanMode,
-               size_t &MatchLen, StringMap<StringRef> &VariableTable,
-               FileCheckRequest &Req, std::vector<FileCheckDiag> *Diags) const;
+               size_t &MatchLen, FileCheckRequest &Req,
+               std::vector<FileCheckDiag> *Diags) const;
 
   bool CheckNext(const SourceMgr &SM, StringRef Buffer) const;
   bool CheckSame(const SourceMgr &SM, StringRef Buffer) const;
   bool CheckNot(const SourceMgr &SM, StringRef Buffer,
                 const std::vector<const FileCheckPattern *> &NotStrings,
-                StringMap<StringRef> &VariableTable,
                 const FileCheckRequest &Req,
                 std::vector<FileCheckDiag> *Diags) const;
   size_t CheckDag(const SourceMgr &SM, StringRef Buffer,
                   std::vector<const FileCheckPattern *> &NotStrings,
-                  StringMap<StringRef> &VariableTable,
                   const FileCheckRequest &Req,
                   std::vector<FileCheckDiag> *Diags) const;
 };
 
 /// FileCheck class takes the request and exposes various methods that
 /// use information from the request.
 class FileCheck {
   FileCheckRequest Req;

lib/Support/FileCheck.cpp

 #include <cstdint>
 #include <list>
 #include <map>
 #include <tuple>
 #include <utility>
 
 using namespace llvm;
 
+/// Define format equality: formats are equal if all bits are identical.
+bool FileCheckNumExprFmtType::
+operator==(const struct FileCheckNumExprFmtType &other) {
+  return Set == other.Set && Conflict == other.Conflict &&
+         Signed == other.Signed && Hex == other.Hex && Cap == other.Cap;
+}
+
+/// Equality operator: 2 values are equal if both are valid and have same
+/// signedness and corresponding value.
+bool FileCheckNumExprVal::operator==(const FileCheckNumExprVal &other) {
+  if (!Valid || !other.Valid)
+    return false;
+
+  if (Signed)
+    return SVal == other.SVal;
+  else
+    return UVal == other.UVal;
+}
+
+/// Convert value to a signed value, or mark value invalid if not possible
+/// (original value was not within range for a signed integer).
+void FileCheckNumExprVal::ConvertSigned() {
+  if (!Valid || Signed)
+    return;
+
+  if (UVal > std::numeric_limits<int64_t>::max()) {
+    Valid = false;
+    return;
+  }
+
+  SVal = UVal;
+  Signed = true;
+}
+
+/// Convert value to an unsigned value, or mark value invalid if not possible
+/// (original value was not within range for an unsigned integer).
+void FileCheckNumExprVal::ConvertUnsigned() {
+  if (!Valid || !Signed)
+    return;
+
+  if (SVal < 0) {
+    Valid = false;
+    return;
+  }
+
+  UVal = SVal;
+  Signed = false;
+  return;
+}
+
+/// Store in \p StringRepr a string representation of this value given the
+/// matching format \p Fmt.  Return whether value had no such a string
+/// representation (true if value is invalid).
+bool FileCheckNumExprVal::GetStringRepr(struct FileCheckNumExprFmtType Fmt,
+                                        std::string &StringRepr) const {
+  if (!Valid)
+    return true;
+
+  if (Fmt.Hex) {
+    StringRepr = utohexstr(GetUnsignedValue(), !Fmt.Cap);
+  } else if (Fmt.Signed)
+    StringRepr = itostr(GetSignedValue());
+  else
+    StringRepr = utostr(GetUnsignedValue());
+
+  return false;
+}
+
+/// Perform an addition operation.  Return an invalid value in case of
+/// underflow or overflow.
+FileCheckNumExprVal FileCheckNumExprVal::Add(const FileCheckNumExprVal &Op1,
+                                             const FileCheckNumExprVal &Op2) {
+  // Operands must be valid.
+  if (!Op1.Valid || !Op2.Valid)
+    return FileCheckNumExprVal();
+
+  // Operands must have same sign.
+  if (Op1.Signed != Op2.Signed)
+    return FileCheckNumExprVal();
+
+  if (Op1.Signed) {
+    int64_t Val1 = Op1.SVal;
+    int64_t Val2 = Op2.SVal;
+
+    // Op1 + Op2 > max int64_t.
+    if (Val1 > 0 && Val2 > 0 &&
+        Val1 > (std::numeric_limits<int64_t>::max() - Val2))
+      return FileCheckNumExprVal();
+
+    // Op1 + Op2 < min int64_t.
+    if (Val1 < 0 && Val2 < 0 &&
+        Val1 < (std::numeric_limits<int64_t>::min() - Val2))
+      return FileCheckNumExprVal();
+
+    return FileCheckNumExprVal(Val1 + Val2);
+  } else {
+    uint64_t Val1 = Op1.UVal;
+    uint64_t Val2 = Op2.UVal;
+
+    // Op1 + Op2 > max uint64_t.
+    if (Val1 > std::numeric_limits<uint64_t>::max() - Val2)
+      return FileCheckNumExprVal();
+    return FileCheckNumExprVal(Val1 + Val2);
+  }
+}
+
+/// Perform a substraction operation.  Return an invalid value in case of
+/// underflow or overflow.
+FileCheckNumExprVal FileCheckNumExprVal::Sub(const FileCheckNumExprVal &Op1,
+                                             const FileCheckNumExprVal &Op2) {
+  // Operands must be valid.
+  if (!Op1.Valid || !Op2.Valid)
+    return FileCheckNumExprVal();
+
+  // Operands must have same sign.
+  if (Op1.Signed != Op2.Signed)
+    return FileCheckNumExprVal();
+
+  if (Op1.Signed) {
+    int64_t Val1 = Op1.SVal;
+    int64_t Val2 = Op2.SVal;
+
+    // Op1 - Op2 > max int64_t.
+    if (Val1 > 0 && Val2 < 0 &&
+        Val1 > (std::numeric_limits<int64_t>::max() + Val2))
+      return FileCheckNumExprVal();
+
+    // Op1 - Op2 < min int64_t.
+    if (Val1 < 0 && Val2 > 0 &&
+        Val1 < (std::numeric_limits<int64_t>::min() + Val2))
+      return FileCheckNumExprVal();
+
+    return FileCheckNumExprVal(Val1 - Val2);
+  } else {
+    uint64_t Val1 = Op1.UVal;
+    uint64_t Val2 = Op2.UVal;
+
+    // Op1 < Op2.
+    if (Val1 < Val2)
+      return FileCheckNumExprVal();
+    return FileCheckNumExprVal(Val1 - Val2);
+  }
+}
+
+/// Evaluate the value of this literal.  Therefore returns this node itself and
+/// set \p Fmt to null since literals do not carry any implicit conversion.
+FileCheckNumExprVal
+FileCheckNumExprLiteral::Eval(struct FileCheckNumExprFmtType &Fmt) {
+  Fmt = FmtNone;
+  return Value;
+}
+
+/// Generic constructor for a numeric expression whose equality constraint is
+/// represented by \p AST, matching format is \p Fmt and whose AST can be
+/// evaluated in phase \p KnownPhase.  If matching format is unset (ie. no
+/// explicit or implicit matching format), set it to default one (unsigned
+/// decimal integer).
+FileCheckNumExpr::FileCheckNumExpr(std::shared_ptr<FileCheckNumExprAST> AST,
+                                   struct FileCheckNumExprFmtType Fmt,
+                                   enum Check::FileCheckPhase KnownPhase)
+    : AST(AST), KnownPhase(KnownPhase) {
+  if (!Fmt.Set)
+    this->Fmt = FmtUnsigned;
+  else
+    this->Fmt = Fmt;
+}
+
+/// Constructor for numeric expression with a known value in parse phase,
+/// eg. the numeric expression defining the @LINE numeric variable (and
+/// currently only used for that).
+FileCheckNumExpr::FileCheckNumExpr(FileCheckNumExprVal Value,
+                                   struct FileCheckNumExprFmtType Fmt)
+    : FileCheckNumExpr(nullptr, Fmt, Check::ParsePhase) {
+  this->Value = Value;
+  this->KnownPhase = Check::ParsePhase;
+}
+
+/// Set Value to \p Val if currently invalid or tentative.  Return whether
+/// Value failed to be set (Value was already valid and final).
+bool FileCheckNumExpr::SetTentativeValue(FileCheckNumExprVal Val) {
+  // Allow a value to be tentatively set several time.
+  if (Value.IsValid() && !Value.IsTentative())
+    return true;
+
+  // Value should be set from evaluating the AST if any.
+  if (AST != nullptr)
+    return true;
+
+  assert(!Val.IsTentative() && "Setting from already tentative matched value");
+  Val.ToggleTentative();
+  Value = Val;
+  return false;
+}
+
+/// Store in \p Val the value corresponding to string representation \p StrVal
+/// according to matching format of this numeric expression.  Return whether
+/// \p StrVal correspond to a valid and representable value.
+bool FileCheckNumExpr::ValueFromStringRepr(StringRef StrVal,
+                                           FileCheckNumExprVal &Val) const {
+  unsigned Radix = Fmt.Hex ? 16 : 10;
+  if (Fmt.Signed) {
+    int64_t SVal;
+
+    if (StrVal.getAsInteger(Radix, SVal))
+      return true;
+
+    Val = FileCheckNumExprVal(SVal);
+  } else {
+    uint64_t UVal;
+
+    if (StrVal.getAsInteger(Radix, UVal))
+      return true;
+
+    Val = FileCheckNumExprVal(UVal);
+  }
+
+  return false;
+}
+
+/// Store in \p MatchString the regexp pattern to use to match this numeric
+/// expression given its matching format.  Return whether the function was
+/// unable to determine the regexp pattern.
+bool FileCheckNumExpr::GetMatchString(enum Check::FileCheckPhase Phase,
+                                      std::string &MatchString) {
+  assert(Phase <= Check::MatchPhase && "Asking match string after match done");
+
+  // We know the value, return its string representation.  If supporting other
+  // constraints than equality this should be restricted to equality only.
+  if (Phase >= KnownPhase) {
+    if (!Value.IsValid())
+      return true;
+
+    if (Value.GetStringRepr(Fmt, MatchString))
+      return true;
+    return false;
+    // We do not know the value but we will at match time.
+  } else if (KnownPhase <= Check::MatchPhase) {
+    MatchString = std::string();
+    return false;
+    // We do not know the value and will not know it at match time.  Output
+    // appropriate wildcard pattern.
+  } else {
+    assert(Fmt.Set && !(Fmt.Hex && Fmt.Signed) &&
+           "Numeric expression with unexpected conversion");
+    if (Fmt.Hex) {
+      if (Fmt.Cap)
+        MatchString = std::string("[[:digit:]A-F]+");
+      else
+        MatchString = std::string("[[:digit:]a-f]+");
+    } else if (Fmt.Signed)
+      MatchString = std::string("-?[[:digit:]]+");
+    else
+      MatchString = std::string("[[:digit:]]+");
+
+    return false;
+  }
+}
+
+/// Verify that the matched value in \p MatchedValue satisfies the constraint
+/// expressed by this expression.  Return true if constraint is not satisfied.
+bool FileCheckNumExpr::VerifyConstraint(
+    FileCheckNumExprVal MatchedValue) const {
+  // Nothing to verify: numeric variable definition with empty numeric
+  // expression.
+  if (AST == nullptr)
+    return false;
+
+  // Will fail if Value or MatchedValue are invalid.
+  return MatchedValue != Value;
+}
+
+/// Store in \p EvaluatedValue the value evaluated from the constraint of this
+/// numeric expression.  Return whether evaluation failed.
+bool FileCheckNumExpr::Eval(FileCheckNumExprVal &EvaluatedValue) const {
+  // Nothing to evaluate: numeric variable definition with empty numeric
+  // expression.
+  if (AST == nullptr)
+    return true;
+
+  FileCheckNumExprFmtType ImplicitFmt;
+  EvaluatedValue = AST->Eval(ImplicitFmt);
+  if (!EvaluatedValue.IsValid())
+    return true;
+
+  // If expression comes with an explicit printing format different from the
+  // implicit one, signedness of EvaluatedValue could be different from the
+  // matched value.  Convert to signedness of expression to ensure value
+  // compare equally.
+  if (Fmt.Signed)
+    EvaluatedValue.ConvertSigned();
+  else
+    EvaluatedValue.ConvertUnsigned();
+  if (!EvaluatedValue.IsValid())
+    return true;
+
+  return false;
+}
+
+/// Set Value from the result of calling Eval().  Return whether it failed.
+bool FileCheckNumExpr::SetValueFromEval() {
+  // No need to evaluate, we already have a final value.
+  if (Value.IsValid() && !Value.IsTentative())
+    return true;
+
+  FileCheckNumExprVal EvaluatedValue;
+  if (Eval(EvaluatedValue))
+    return true;
+
+  Value = EvaluatedValue;
+  return false;
+}
+
+/// Mark value as final.  Return whether value was already final.
+bool FileCheckNumExpr::CommitValue() {
+  // Value is not a valid tentative value.
+  if (!Value.IsValid() || !Value.IsTentative())
+    return true;
+
+  Value.ToggleTentative();
+  return false;
+}
+
+/// Constructor for numeric variable \p Name with a known \p Value at parse
+/// time (eg. the @LINE numeric variable).  Matching format of the variable is
+/// given in \p Fmt and \p DefLineNumber indicates when does this variable
+/// starts to be defined.
+FileCheckNumExprVar::FileCheckNumExprVar(StringRef Name,
+                                         FileCheckNumExprVal Value,
+                                         struct FileCheckNumExprFmtType Fmt,
+                                         unsigned DefLineNumber)
+    : Name(Name), DefLineNumber(DefLineNumber) {
+  this->NumExpr = std::make_shared<FileCheckNumExpr>(Value, Fmt);
+}
+
+/// Evaluate the value of this numeric variable.  Therefore returns the value
+/// and implicit conversion of this numeric variable stored in its
+/// corresponding numeric expression class.
+FileCheckNumExprVal
+FileCheckNumExprVar::Eval(struct FileCheckNumExprFmtType &Fmt) {
+  // Undefined variable.
+  if (NumExpr == nullptr)
+    return FileCheckNumExprVal();
+  Fmt = NumExpr->GetFormat();
+  return NumExpr->GetValue();
+}
+
+/// Append numeric variable's name to UndefVarNames if undefined.
+void FileCheckNumExprVar::GetUndefVarNames(
+    std::vector<StringRef> &UndefVarNames) const {
+  if (NumExpr == nullptr)
+    UndefVarNames.emplace_back(Name);
+}
+
+/// Evaluate the value of the binary operation represented by this AST.  Uses
+/// EvalBinop to perform the binary operation on the values of recursively
+/// evaluating the left and right operands.
+FileCheckNumExprVal
+FileCheckASTBinop::Eval(struct FileCheckNumExprFmtType &Fmt) {
+  struct FileCheckNumExprFmtType LFmt, RFmt;
+  FileCheckNumExprVal LVal = Opl->Eval(LFmt);
+  FileCheckNumExprVal RVal = Opr->Eval(RFmt);
+
+  // Integer promotion.
+  if (!LVal.IsSigned() || !RVal.IsSigned()) {
+    LVal.ConvertUnsigned();
+    RVal.ConvertUnsigned();
+  }
+
+  if (!LVal.IsValid() || !RVal.IsValid())
+    return FileCheckNumExprVal();
+
+  Fmt = (LFmt.Set) ? LFmt : RFmt;
+  if (LFmt.Set && RFmt.Set && LFmt != RFmt)
+    Fmt.Conflict = 1;
+
+  FileCheckNumExprVal Val = EvalBinop(LVal, RVal);
+
+  // Mark result as tentative if any of the operand was tentative.  Assert
+  // result was not tentative beforehand to have that check only here.
+  assert(!Val.IsTentative() && "Binary operation returned tentative value");
+  if (LVal.IsTentative() || RVal.IsTentative())
+    Val.ToggleTentative();
+  return Val;
+}
+
+/// Append to UnderVarNames the names of undefined numeric variables used in
+/// any of the operands.
+void FileCheckASTBinop::GetUndefVarNames(
+    std::vector<StringRef> &UndefVarNames) const {
+  Opl->GetUndefVarNames(UndefVarNames);
+  Opr->GetUndefVarNames(UndefVarNames);
+}
+
+/// Perform in \p SubstValue the substitution represented by this class
+/// instance.  For numeric variable we replace it by its value if known at
+/// match time or a suitable wildcard pattern otherwise.  For pattern variable
+/// we simply replace it by the text its definition matched.  Return whether
+/// substitution failed.
+bool FileCheckPatternSubst::Substitute(std::string &SubstValue) const {
+  if (isNumExpr) {
+    if (NumExpr->GetKnownPhase() == Check::MatchPhase) {
+      if (NumExpr->SetValueFromEval())
+        return true;
+    }
+    if (NumExpr->GetMatchString(Check::MatchPhase, SubstValue))
+      return true;
+    return false;
+  } else {
+    // Look up the value and escape it so that we can put it into the
+    // regex.
+    StringRef VarVal;
+    if (Context->GetPatternVarValue(SubstStr, VarVal))
+      return true;
+    SubstValue = Regex::escape(VarVal);
+  }
+
+  return false;
+}
+
+/// Write in \p MatchedValue the value successfully matched (ie. constraint is
+/// verified for a numeric expression) by the substitution.  Return whether
+/// match failed for that substitution.
+bool FileCheckPatternSubst::MatchedValue(std::string &MatchedValue) const {
+  if (isNumExpr) {
+    // This will return true if NumExpr's value is invalid, which it will be if
+    // NumExpr did not match or the matched value did not satisfy the
+    // expression constraint.
+    return NumExpr->GetValueStringRepr(MatchedValue);
+  } else {
+    // Look up the value and escape it so that we can put it into the
+    // regex.
+    StringRef VarVal;
+    if (Context->GetPatternVarValue(SubstStr, VarVal))
+      return true;
+    MatchedValue = Regex::escape(VarVal);
+  }
+
+  return false;
+}
+
+/// Append to UnderVarNames the names of undefined pattern or numeric variables
+/// used in this substitution.
+void FileCheckPatternSubst::GetUndefVarNames(
+    std::vector<StringRef> &UndefVarNames) const {
+  if (isNumExpr)
+    NumExpr->GetAST()->GetUndefVarNames(UndefVarNames);
+  else {
+    StringRef VarVal;
+    if (Context->GetPatternVarValue(SubstStr, VarVal))
+      UndefVarNames.emplace_back(SubstStr);
+  }
+}
+
+/// Parsing helper function that strips all leading whitespace from \p s.
+static inline void SkipWhitespace(StringRef &s) { s = s.ltrim(" \t"); }
+
+/// Parsing helper function that strips the string in \p SkipStr from \p s.
+/// Returns true if string \p SkipStr was not in \p s and \p Optional was
+/// false.  Returns false otherwise.
+static bool Skip(StringRef &s, const StringRef &SkipStr, bool Optional) {
+  if (!s.consume_front(SkipStr) && !Optional)
+    return true;
+  return false;
+}
+
+/// Parsing helper function that strips the first character in \p s and returns
+/// it.
+static char Next(StringRef &s) {
+  char c = s.front();
+  s = s.drop_front();
+  return c;
+}
+
+// Verify that the string in \p Str or at the start of \p Str (if \p
+// AllowTrailer is true) is a well formed variable name.  Also set IsPseudo to
+// true if it is a pseudo variable.
+bool FileCheckPattern::ParseVariable(StringRef Str, bool &IsPseudo,
+                                     unsigned &TrailIdx) const {
+  bool ParsedOneChar = false;
+  unsigned i = 0;
+  IsPseudo = false;
+  for (unsigned e = Str.size(); i != e; ++i) {
+    if (i == 0) {
+      // Global vars start with '$'.
+      if (Str[i] == '$')
+        continue;
+      else if (Str[i] == '@') {
+        IsPseudo = true;
+        continue;
+      }
+    }
+    // Variable names are composed of alphanumeric characters and underscores.
+    if (Str[i] != '_' && !isalnum(Str[i]))
+      break;
+    ParsedOneChar = true;
+  }
+
+  // Empty name.
+  if (!ParsedOneChar)
+    return true;
+
+  TrailIdx = i;
+  StringRef Name = Str.substr(0, i);
+
+  // Name can't start with a digit.
+  if (isdigit(static_cast<unsigned char>(Name[0])))
+    return true;
+
+  return false;
+}
+
+/// Parse \p Expr for use or definition of a numeric variable.  Return the
+/// class instance representing the corresponding variable definition to be
+/// used in the numeric expression AST in the case of a use, or nullptr if
+/// parsing fails in which case errors are reported on \p SM.  If
+/// \p IsDefinition is true, a new instance is created.  Likewise in case of
+/// use if the variable is undefined at that point in the pattern.
+std::shared_ptr<FileCheckNumExprVar>
+FileCheckPattern::ParseNumericVariable(StringRef &Expr, bool IsDefinition,
+                                       const SourceMgr &SM) const {
+  bool IsPseudo;
+  unsigned TrailIdx;
+
+  if (ParseVariable(Expr, IsPseudo, TrailIdx))
+    return nullptr;
+  StringRef Name = Expr.substr(0, TrailIdx);
+  Expr = Expr.substr(TrailIdx);
+
+  if (IsPseudo && !Name.equals("@LINE")) {
+    SM.PrintMessage(SMLoc::getFromPointer(Name.data()), SourceMgr::DK_Error,
+                    "Unsupported pseudo variable '" + Name + "'");
+    return nullptr;
+  }
+  if (IsDefinition && IsPseudo) {
+    SM.PrintMessage(SMLoc::getFromPointer(Name.data()), SourceMgr::DK_Error,
+                    "Definition of pseudo variable '" + Name + "' unsupported");
+    return nullptr;
+  }
+
+  if (IsDefinition) {
+    // Detect collision between pattern and numeric variable when the latter
+    // is created on a later line than the former.
+    if (Context->DefinedVariableTable.find(Name) !=
+        Context->DefinedVariableTable.end()) {
+      SM.PrintMessage(SMLoc::getFromPointer(Name.data()), SourceMgr::DK_Error,
+                      "Pattern variable with same name '" + Name + "' exists");
+      return nullptr;
+    }
+    return std::make_shared<FileCheckNumExprVar>(Name, this->LineNumber);
+  } else {
+    // This method is indirectly called from ParsePattern for all numeric
+    // variable definition and uses in the order in which they appear in the
+    // CHECK pattern.  For each definition, the pointer to the corresponding
+    // AST class instance is stored in GlobalNumericVariableTable.  Therefore
+    // the pointer we get below is for the AST class instance corresponding to
+    // the last definition of the variable before this use.
+    auto git = Context->GlobalNumericVariableTable.find(Name);
+    if (git != Context->GlobalNumericVariableTable.end())
+      return git->second;
+
+    SM.PrintMessage(SMLoc::getFromPointer(Name.data()), SourceMgr::DK_Error,
+                    "Using undefined numeric variable '" + Name + "'");
+    return std::make_shared<FileCheckNumExprVar>(Name, 0);
+  }
+}
+
+/// Parse \p Expr for use of a numeric operand.  Accept both literal values
+/// and numeric variables.  Return the class representing that operand in the
+/// AST of the numeric expression or nullptr if parsing fails in which case
+/// errors are reported on \p SM.  Also return in \p ImplicitFmt the implicit
+/// matching format of the operand and in \p KnownPhase the FileCheck phase
+/// when the value of that operand is known.
+std::shared_ptr<FileCheckNumExprAST> FileCheckPattern::ParseNumericOperand(
+    StringRef &Expr, const SourceMgr &SM,
+    struct FileCheckNumExprFmtType &ImplicitFmt,
+    enum Check::FileCheckPhase &KnownPhase) const {
+
+  // Try to parse as a numeric variable use.
+  std::shared_ptr<FileCheckNumExprVar> NumVar =
+      ParseNumericVariable(Expr, false, SM);
+  if (NumVar != nullptr) {
+    FileCheckNumExpr *NumExpr = NumVar->GetNumExpr();
+    // Variable is not undefined.
+    if (NumExpr != nullptr) {
+      ImplicitFmt = NumExpr->GetFormat();
+      if (NumExpr->GetKnownPhase() == Check::ParsePhase)
+        KnownPhase = Check::ParsePhase;
+      // Variable defined on earlier line.  Its value will thus be known when
+      // matching this use.
+      else if (NumVar->GetDefLineNumber() < LineNumber)
+        KnownPhase = Check::MatchPhase;
+      else
+        KnownPhase = Check::CheckPhase;
+    }
+    return NumVar;
+  }
+
+  // Otherwise, parse it as a literal.
+  int64_t SignedLiteralValue;
+  uint64_t UnsignedLiteralValue;
+  StringRef SaveExpr = Expr;
+  // Accept both signed and unsigned literal.
+  if (!Expr.consumeInteger(0, SignedLiteralValue)) {
+    ImplicitFmt = FmtNone;
+    KnownPhase = Check::ParsePhase;
+    return std::make_shared<FileCheckNumExprLiteral>(SignedLiteralValue);
+  } else {
+    Expr = SaveExpr;
+    if (!Expr.consumeInteger(0, UnsignedLiteralValue)) {
+      ImplicitFmt = FmtNone;
+      KnownPhase = Check::ParsePhase;
+      return std::make_shared<FileCheckNumExprLiteral>(UnsignedLiteralValue);
+    } else
+      return nullptr;
+  }
+}
+
+/// Parse \p Expr for a binary operation.  The left operand of the operand is
+/// given in \p Opl.  Return the class representing that binary operation in
+/// the AST of the numeric expression or nullptr if parsing in which case
+/// errors are reported on \p SM.  Also return in \p ImplicitFmt the implicit
+/// matching format of the binary operation and in \p KnownPhase the FileCheck
+/// phase when the value of that operand is known.
+std::shared_ptr<FileCheckNumExprAST> FileCheckPattern::ParseFileCheckBinop(
+    StringRef &Expr, std::shared_ptr<FileCheckNumExprAST> Opl,
+    const SourceMgr &SM, struct FileCheckNumExprFmtType &ImplicitFmt,
+    enum Check::FileCheckPhase &KnownPhase) const {
+  SkipWhitespace(Expr);
+  if (Expr.empty())
+    return Opl;
+
+  // Check if this is a supported operation and selection function to perform
+  // it.
+  SMLoc oploc = SMLoc::getFromPointer(Expr.data());
+  char Operator = Next(Expr);
+  binop_eval_t EvalBinop;
+  switch (Operator) {
+  case '+':
+    EvalBinop = FileCheckNumExprVal::Add;
+    break;
+  case '-':
+    EvalBinop = FileCheckNumExprVal::Sub;
+    break;
+  default:
+    SM.PrintMessage(oploc, SourceMgr::DK_Error,
+                    std::string("Unsupported numeric operation '") + Operator +
+                        "'");
+    return nullptr;
+  }
+
+  SkipWhitespace(Expr);
+  if (Expr.empty())
+    return nullptr;
+
+  // Parse right operand.
+  struct FileCheckNumExprFmtType OplImplicitFmt = ImplicitFmt;
+  enum Check::FileCheckPhase OplKnownPhase = KnownPhase;
+  std::shared_ptr<FileCheckNumExprAST> Opr =
+      ParseNumericOperand(Expr, SM, ImplicitFmt, KnownPhase);
+  if (Opr == nullptr)
+    return nullptr;
+
+  // Compute implicit matching format of the binary operation and indicate
+  // whether the two operands have conflicting implicit format.
+  if (OplImplicitFmt.Set) {
+    if (ImplicitFmt.Set && OplImplicitFmt != ImplicitFmt)
+      ImplicitFmt.Conflict = 1;
+    else
+      ImplicitFmt = OplImplicitFmt;
+  }
+
+  KnownPhase = OplKnownPhase > KnownPhase ? OplKnownPhase : KnownPhase;
+  return std::make_shared<FileCheckASTBinop>(EvalBinop, Opl, Opr);
+}
+
+/// Parse \p Expr for a numeric expression.  Return the class representing the
+/// AST of numeric expression or nullptr if parsing fails in which case errors
+/// are reported on \p SM.  Set \p NumVarDef to the pointer to the class
+/// representing the variable defined to this numeric expression if any.
+std::shared_ptr<FileCheckNumExpr> FileCheckPattern::ParseNumericExpression(
+    StringRef Expr, std::shared_ptr<FileCheckNumExprVar> &NumVarDef,
+    const SourceMgr &SM) const {
+  struct FileCheckNumExprFmtType Fmt, ExplicitFmt = FmtNone;
+
+  // Parse format specifier.
+  size_t FmtSpecEnd = Expr.find(',');
+  if (FmtSpecEnd != StringRef::npos) {
+    SkipWhitespace(Expr);
+    if (Skip(Expr, "%", false /*Optional*/)) {
+      SM.PrintMessage(
+          SMLoc::getFromPointer(Expr.data()), SourceMgr::DK_Error,
+          "Invalid matching format specification in numeric expression");
+      return nullptr;
+    }
+
+    // Check for unknown matching format specifier and set matching format in
+    // class instance representing this numeric expression.
+    SMLoc fmtloc = SMLoc::getFromPointer(Expr.data());
+    switch (Next(Expr)) {
+    case 'u':
+      ExplicitFmt = FmtUnsigned;
+      break;
+    case 'd':
+      ExplicitFmt = FmtSigned;
+      break;
+    case 'x':
+      ExplicitFmt = FmtLowHex;
+      break;
+    case 'X':
+      ExplicitFmt = FmtCapHex;
+      break;
+    default:
+      SM.PrintMessage(fmtloc, SourceMgr::DK_Error,
+                      "Invalid format specifier in numeric expression");
+      return nullptr;
+    }
+
+    SkipWhitespace(Expr);
+    if (Skip(Expr, ",", false /*Optional*/)) {
+      SM.PrintMessage(
+          SMLoc::getFromPointer(Expr.data()), SourceMgr::DK_Error,
+          "Invalid matching format specification in numeric expression");
+      return nullptr;
+    }
+  }
+
+  // Parse numeric variable definition.
+  NumVarDef.reset();
+  size_t DefEnd = Expr.find(':');
+  if (DefEnd != StringRef::npos) {
+    SkipWhitespace(Expr);
+
+    NumVarDef = ParseNumericVariable(Expr, true /*IsDefinition*/, SM);
+    // Invalid variable definition.  Error reporting done in parsing function.
+    if (NumVarDef == nullptr)
+      return nullptr;
+
+    SkipWhitespace(Expr);
+    if (Skip(Expr, ":", false /*Optional*/))
+      return nullptr;
+    SkipWhitespace(Expr);
+  }
+
+  // Parse matching constraint.
+  SkipWhitespace(Expr);
+  if (Skip(Expr, "==", true /*Optional*/))
+    return nullptr;
+
+  // Parse numeric expression itself.
+  std::shared_ptr<FileCheckNumExprAST> NumExprAST;
+  struct FileCheckNumExprFmtType ImplicitFmt = FmtNone;
+  enum Check::FileCheckPhase KnownPhase;
+  if (Expr.empty())
+    KnownPhase = Check::CheckPhase;
+  else {
+    SkipWhitespace(Expr);
+    NumExprAST = ParseNumericOperand(Expr, SM, ImplicitFmt, KnownPhase);
+    while (NumExprAST != nullptr && !Expr.empty())
+      NumExprAST =
+          ParseFileCheckBinop(Expr, NumExprAST, SM, ImplicitFmt, KnownPhase);
+    if (NumExprAST == nullptr)
+      return nullptr;
+  }
+
+  // Select explicit matching format if any, implicit one otherwise.  Error out
+  // in case of conflicting implicit format without explicit format.
+  if (ExplicitFmt.Set)
+    Fmt = ExplicitFmt;
+  else if (ImplicitFmt.Conflict) {
+    SM.PrintMessage(
+        SMLoc::getFromPointer(Expr.data()), SourceMgr::DK_Error,
+        "Variables with conflicting format specifier: need an explicit one");
+    return nullptr;
+  } else
+    Fmt = ImplicitFmt;
+
+  auto NumExpr =
+      std::make_shared<FileCheckNumExpr>(NumExprAST, Fmt, KnownPhase);
+  if (NumVarDef != nullptr)
+    NumVarDef->SetNumExpr(NumExpr);
+  return NumExpr;
+}
+
+/// Parse legacy numeric expressions in \p Expr, ie. numeric expressions that
+/// were allowed using the pattern variable syntax before numeric expressions
+/// support was added to FileCheck.  Pass \p Name of pseudovariable used in the
+/// expression and pass in \p Trailer the rest of the expression.  If parsing
+/// fails, errors are reported on \p SM.
+std::shared_ptr<FileCheckNumExpr>
+FileCheckPattern::ParseLegacyNumericExpression(StringRef Expr, StringRef Name,
+                                               StringRef Trailer,
+                                               const SourceMgr &SM) const {
+  if (!Name.equals("@LINE")) {
+    SM.PrintMessage(SMLoc::getFromPointer(Name.data()), SourceMgr::DK_Error,
+                    "invalid pseudo variable in named regex");
+    return nullptr;
+  }
+
+  if (!Trailer.empty()) {
+    if (Trailer[0] != '+' && Trailer[0] != '-') {
+      SM.PrintMessage(SMLoc::getFromPointer(Trailer.data()),
+                      SourceMgr::DK_Error,
+                      "invalid operator for pseudo variable in named regex");
+      return nullptr;
+    }
+    Trailer = Trailer.substr(1);
+
+    int Offset;
+    if (Trailer.getAsInteger(10, Offset)) {
+      SM.PrintMessage(SMLoc::getFromPointer(Trailer.data()),
+                      SourceMgr::DK_Error,
+                      "invalid offset for pseudo variable in named regex");
+      return nullptr;
+    }
+  }
+
+  std::shared_ptr<FileCheckNumExprVar> NumVarDef;
+  std::shared_ptr<FileCheckNumExpr> NumExpr =
+      ParseNumericExpression(Expr, NumVarDef, SM);
+  assert(NumVarDef == nullptr && "Legacy numeric expression sets variable");
+  return NumExpr;
+}
+
 /// Parses the given string into the Pattern.
 ///
 /// \p Prefix provides which prefix is being matched, \p SM provides the
 /// SourceMgr used for error reports, and \p LineNumber is the line number in
 /// the input file from which the pattern string was read. Returns true in
 /// case of an error, false otherwise.
 bool FileCheckPattern::ParsePattern(StringRef PatternStr, StringRef Prefix,
                            SourceMgr &SM, unsigned LineNumber,
                            const FileCheckRequest &Req) {
   bool MatchFullLinesHere = Req.MatchFullLines && CheckTy != Check::CheckNot;
 
   this->LineNumber = LineNumber;
   PatternLoc = SMLoc::getFromPointer(PatternStr.data());
 
+  // Create fake @LINE pseudo variable definition.
+  StringRef LinePseudo = "@LINE";
+  uint64_t LineNumber64 = LineNumber;
+  auto LineNumberVal = FileCheckNumExprVal(LineNumber64);
+  auto LinePseudoVar = std::make_shared<FileCheckNumExprVar>(
+      LinePseudo, LineNumberVal, FmtUnsigned, LineNumber);
+  Context->GlobalNumericVariableTable[LinePseudo] = LinePseudoVar;
+
   if (!(Req.NoCanonicalizeWhiteSpace && Req.MatchFullLines))
     // Ignore trailing whitespace.
     while (!PatternStr.empty() &&
            (PatternStr.back() == ' ' || PatternStr.back() == '\t'))
       PatternStr = PatternStr.substr(0, PatternStr.size() - 1);
 
   // Check that there is something on the line.
   if (PatternStr.empty() && CheckTy != Check::CheckEmpty) {
while (!PatternStr.empty()) {
     }
 
     // Named RegEx matches.  These are of two forms: [[foo:.*]] which matches .*
     // (or some other regex) and assigns it to the FileCheck variable 'foo'. The
     // second form is [[foo]] which is a reference to foo.  The variable name
     // itself must be of the form "[a-zA-Z_][0-9a-zA-Z_]*", otherwise we reject
     // it.  This is to catch some common errors.
     if (PatternStr.startswith("[[")) {
+      StringRef MatchStr = PatternStr.substr(2);
+      bool IsNumExpr = MatchStr.consume_front("#");
+      const char *RefTypeStr = IsNumExpr ? "numeric expression" : "named regex";
       // Find the closing bracket pair ending the match.  End is going to be an
       // offset relative to the beginning of the match string.
-      size_t End = FindRegexVarEnd(PatternStr.substr(2), SM);
+      size_t End = FindRegexVarEnd(MatchStr, SM);
 
       if (End == StringRef::npos) {
-        SM.PrintMessage(SMLoc::getFromPointer(PatternStr.data()),
-                        SourceMgr::DK_Error,
-                        "invalid named regex reference, no ]] found");
+        SM.PrintMessage(
+            SMLoc::getFromPointer(PatternStr.data()), SourceMgr::DK_Error,
+            std::string("invalid ") + RefTypeStr + " reference, no ]] found");
         return true;
       }
 
-      StringRef MatchStr = PatternStr.substr(2, End);
-      PatternStr = PatternStr.substr(End + 4);
+      MatchStr = MatchStr.substr(0, End);
+      PatternStr = PatternStr.substr(End + 4 + (int)IsNumExpr);
 
-      // Get the regex name (e.g. "foo").
-      size_t NameEnd = MatchStr.find(':');
-      StringRef Name = MatchStr.substr(0, NameEnd);
-
-      if (Name.empty()) {
-        SM.PrintMessage(SMLoc::getFromPointer(Name.data()), SourceMgr::DK_Error,
-                        "invalid name in named regex: empty name");
+      bool CaptureParenNeeded;
+      bool SubstNeeded;
+      bool MatchSubstNeeded;
+      bool IsVarDef;
+      StringRef DefName;
+      StringRef SubstStr;
+      StringRef MatchRegexp;
+      unsigned SubstInsertIdx = RegExStr.size();
+      std::shared_ptr<FileCheckNumExprVar> NumVarDef;
+      std::shared_ptr<FileCheckNumExpr> NumExpr;
+
+      // Parse pattern variable or legacy numeric expression.
+      if (!IsNumExpr) {
+        // Get the regex name (e.g. "foo") and verify it is well formed.
+        bool IsPseudo;
+        unsigned TrailIdx;
+        if (ParseVariable(MatchStr, IsPseudo, TrailIdx)) {
+          SM.PrintMessage(SMLoc::getFromPointer(MatchStr.data()),
+                          SourceMgr::DK_Error, "invalid name in named regex");
           return true;
         }
 
-      // Verify that the name/expression is well formed. FileCheck currently
-      // supports @LINE, @LINE+number, @LINE-number expressions. The check here
-      // is relaxed, more strict check is performed in \c EvaluateExpression.
-      bool IsExpression = false;
-      for (unsigned i = 0, e = Name.size(); i != e; ++i) {
-        if (i == 0) {
-          if (Name[i] == '$')  // Global vars start with '$'
-            continue;
-          if (Name[i] == '@') {
-            if (NameEnd != StringRef::npos) {
-              SM.PrintMessage(SMLoc::getFromPointer(Name.data()),
-                              SourceMgr::DK_Error,
-                              "invalid name in named regex definition");
-              return true;
-            }
-            IsExpression = true;
-            continue;
-          }
-        }
-        if (Name[i] != '_' && !isalnum(Name[i]) &&
-            (!IsExpression || (Name[i] != '+' && Name[i] != '-'))) {
-          SM.PrintMessage(SMLoc::getFromPointer(Name.data() + i),
-                          SourceMgr::DK_Error, "invalid name in named regex");
-          return true;
-        }
-      }
+        StringRef Name = MatchStr.substr(0, TrailIdx);
+        StringRef Trailer = MatchStr.substr(TrailIdx);
+        size_t DefSepIdx = Trailer.find(":");
+        IsVarDef = (DefSepIdx != StringRef::npos);
+        MatchSubstNeeded = !IsVarDef;
+        SubstNeeded = MatchSubstNeeded;
+        CaptureParenNeeded = IsVarDef;
+
+        if (IsVarDef && (IsPseudo || !Trailer.consume_front(":"))) {
+          SM.PrintMessage(SMLoc::getFromPointer(MatchStr.data()),
 
-      // Name can't start with a digit.
-      if (isdigit(static_cast<unsigned char>(Name[0]))) {
-        SM.PrintMessage(SMLoc::getFromPointer(Name.data()), SourceMgr::DK_Error,
-                        "invalid name in named regex");
+        if (IsVarDef) {
+          // Detect collision between pattern and numeric variable when the
+          // former is created on a later line than the latter.
+          if (Context->GlobalNumericVariableTable.find(Name) !=
+              Context->GlobalNumericVariableTable.end()) {
+            SM.PrintMessage(
+                SMLoc::getFromPointer(MatchStr.data()), SourceMgr::DK_Error,
+                "Numeric variable with same name '" + Name + "' exists");
             return true;
           }
+          DefName = Name;
+          MatchRegexp = Trailer;
+        } else {
+          SubstStr = MatchStr;
 
-      // Handle [[foo]].
-      if (NameEnd == StringRef::npos) {
-        // Handle variables that were defined earlier on the same line by
-        // emitting a backreference.
-        if (VariableDefs.find(Name) != VariableDefs.end()) {
-          unsigned VarParenNum = VariableDefs[Name];
-          if (VarParenNum < 1 || VarParenNum > 9) {
-            SM.PrintMessage(SMLoc::getFromPointer(Name.data()),
+          // Syntax for pattern variables allowed for simple expressions based
+          // on @LINE pseudo variable (aka legacy numeric expressions) before
+          // numeric expression support was added.  Accept those (and only
+          // those) for compatibility.
+          if (IsPseudo) {
+            NumExpr = ParseLegacyNumericExpression(MatchStr, Name, Trailer, SM);
+            if (NumExpr == nullptr)
+              return true;
+            IsNumExpr = true;
+          } else if (!Trailer.empty()) {
+            SM.PrintMessage(SMLoc::getFromPointer(Trailer.data()),
                             SourceMgr::DK_Error,
-                            "Can't back-reference more than 9 variables");
+                            "invalid use of operator in named regex");
             return true;
           }
-          AddBackrefToRegEx(VarParenNum);
-        } else {
-          VariableUses.push_back(std::make_pair(Name, RegExStr.size()));
-        }
-        continue;
+        }
+        // Parse numeric expression.
+        SubstStr = MatchStr;
+        NumExpr = ParseNumericExpression(SubstStr, NumVarDef, SM);
+        if (NumExpr == nullptr)
+          return true;
+
+      // Process numeric expressions and legacy numeric expressions.
+      if (IsNumExpr) {
+        IsVarDef = (NumVarDef != nullptr);
+        if (IsVarDef)
+          DefName = NumVarDef->GetName();
+
+        // Evaluate the numeric expression if we can already do it so that we
+        // directly add it to the pattern to match and don't have to do a
+        // substitution later.
+        if (NumExpr->GetKnownPhase() == Check::ParsePhase &&
+            NumExpr->SetValueFromEval()) {
+          SM.PrintMessage(
+              SMLoc::getFromPointer(SubstStr.data()), SourceMgr::DK_Error,
+              "Failed to evaluate numeric expression known at parse time");
+          return true;
         }
 
-      // Handle [[foo:.*]].
-      VariableDefs[Name] = CurParen;
+        // Expression can be evaluated at match time, it will need a
+        // substitution.
+        MatchSubstNeeded = (NumExpr->GetKnownPhase() == Check::MatchPhase);
+        SubstNeeded = (NumExpr->GetAST() != nullptr);
+
+        // Expression will only be known after matching is done, matched value
+        // needs to be captured and verified against the constraint of the
+        // numeric expression.
+        if (NumExpr->GetKnownPhase() > Check::MatchPhase) {
+          CaptureParenNeeded = true;
+          FileCheckNumExprMatch NumExprMatch = {NumExpr, CurParen};
+          CapturedNumericExpressions.emplace_back(NumExprMatch);
+          // No capture needed otherwise.
+        } else
+          CaptureParenNeeded = false;
+
+        // Get the string we need to match if we know it already.  This could
+        // be either the value if we already know it or a suitable wildcard
+        // pattern if value would be known after match and needs to be verified
+        // against the constraint of the numeric expression.  Numeric
+        // expression whose evaluation is known at match time get an empty
+        // string and a substitution is created instead.
+        std::string MatchString;
+        if (NumExpr->GetMatchString(Check::ParsePhase, MatchString))
+          assert(false && "Failed to get string to match");
+        MatchRegexp = StringRef(MatchString);
+      }
+
+      // Capturing parentheses are needed.  Numeric expressions using variable
+      // defined on the same line need it to do the match in a single pass:
+      // they are matched using an appropriate wildcard pattern and the matched
+      // value gets verified against the constraint of the numeric expression
+      // later.
+      if (CaptureParenNeeded) {
         RegExStr += '(';
+        // Checking numeric expressions requires substituting them by suitable
+        // wildcard patterns and capturing what these matched to.  Adjust
+        // substitution index to be inside the capturing parentheses.
+        ++SubstInsertIdx;
+      }
+
+      // Handle variable definition: [[<def>:(...)]] and [[#(...)<def>:(...)]].
+      if (IsVarDef) {
+        if (IsNumExpr)
+          // This store is done here rather than in Match() to allow
+          // ParseNumericVariable() to get the pointer to the AST class
+          // instance of the right variable definition corresponding to a
+          // given numeric variable use.
+          Context->GlobalNumericVariableTable[DefName] = NumVarDef;
+        else {
+          VariableDefs[DefName] = CurParen;
+          // Mark pattern variable as defined to detect collision between
+          // pattern and numeric variable in ParseNumericVariable when the
+          // latter is created on a later line than the former.  We cannot
+          // reuse GlobalVariableTable by populating it with an empty string
+          // for that since we would then loose the ability to detect use of
+          // undefined variable in Match().
+          Context->DefinedVariableTable[DefName] = true;
+        }
+      }
+
+      if (CaptureParenNeeded)
         ++CurParen;
 
-      if (AddRegExToRegEx(MatchStr.substr(NameEnd + 1), CurParen, SM))
+      if (!MatchRegexp.empty() && AddRegExToRegEx(MatchRegexp, CurParen, SM))
         return true;
 
+      if (CaptureParenNeeded)
         RegExStr += ')';
+
+      // Handle use of pattern variables that were defined earlier on the
+      // same line by emitting a backreference.  Numeric expressions cannot
+      // be expressed using regexs so are recorded as substitutions to
+      // perform by FileCheck in the matching phase when only using variables
+      // defined on the line.  See Match() for how numeric expressions using
+      // any variable defined on the same line are matched.
+      if (!IsNumExpr && VariableDefs.find(SubstStr) != VariableDefs.end()) {
+        unsigned CaptureParen = VariableDefs[SubstStr];
+        if (CaptureParen < 1 || CaptureParen > 9) {
+          SM.PrintMessage(SMLoc::getFromPointer(SubstStr.data()),
+                          SourceMgr::DK_Error,
+                          "Can't back-reference more than 9 variables");
+          return true;
+        }
+        AddBackrefToRegEx(CaptureParen);
+        // Handle use of pattern variables ([[<var>]]) defined in previous CHECK
+        // pattern or use of a numeric expression.
+      } else if (SubstNeeded) {
+        FileCheckPatternSubst Subst =
+            IsNumExpr
+                ? FileCheckPatternSubst(Context, SubstStr, NumExpr,
+                                        SubstInsertIdx)
+                : FileCheckPatternSubst(Context, SubstStr, SubstInsertIdx);
+        AllSubsts.push_back(Subst);
+        // Handle use of a numeric expression with all variables defined in
+        // previous CHECK pattern.
+        if (MatchSubstNeeded)
+          MatchSubsts.push_back(Subst);
+      }
     }
 
     // Handle fixed string matches.
     // Find the end, which is the start of the next regex.
     size_t FixedMatchEnd = PatternStr.find("{{");
     FixedMatchEnd = std::min(FixedMatchEnd, PatternStr.find("[["));
     RegExStr += Regex::escape(PatternStr.substr(0, FixedMatchEnd));
     PatternStr = PatternStr.substr(FixedMatchEnd);

 }
 
 void FileCheckPattern::AddBackrefToRegEx(unsigned BackrefNum) {
   assert(BackrefNum >= 1 && BackrefNum <= 9 && "Invalid backref number");
   std::string Backref = std::string("\\") + std::string(1, '0' + BackrefNum);
   RegExStr += Backref;
 }
 
-/// Evaluates expression and stores the result to \p Value.
-///
-/// Returns true on success and false when the expression has invalid syntax.
-bool FileCheckPattern::EvaluateExpression(StringRef Expr, std::string &Value) const {
-  // The only supported expression is @LINE([\+-]\d+)?
-  if (!Expr.startswith("@LINE"))
-    return false;
-  Expr = Expr.substr(StringRef("@LINE").size());
-  int Offset = 0;
-  if (!Expr.empty()) {
-    if (Expr[0] == '+')
-      Expr = Expr.substr(1);
-    else if (Expr[0] != '-')
-      return false;
-    if (Expr.getAsInteger(10, Offset))
-      return false;
-  }
-  Value = llvm::itostr(LineNumber + Offset);
-  return true;
-}
-
 /// Matches the pattern string against the input buffer \p Buffer
 ///
 /// This returns the position that is matched or npos if there is no match. If
 /// there is a match, the size of the matched string is returned in \p
 /// MatchLen.
 ///
-/// The \p VariableTable StringMap provides the current values of filecheck
-/// variables and is updated if this match defines new values.
+/// The GlobalVariableTable StringMap provides the current values of FileCheck
+/// pattern variables and is updated if this match defines new values.
+/// Substitutions for numeric expression point to the class instance
+/// representing the numeric expression which is updated when the value is
+/// known, either in this function or in ParsePattern if their value is known
+/// at parse time.
 size_t FileCheckPattern::Match(StringRef Buffer, size_t &MatchLen,
-                      StringMap<StringRef> &VariableTable) const {
+                               const SourceMgr &SM) const {
   // If this is the EOF pattern, match it immediately.
   if (CheckTy == Check::CheckEOF) {
     MatchLen = 0;
     return Buffer.size();
   }
 
   // If this is a fixed string pattern, just match it now.
   if (!FixedStr.empty()) {
     MatchLen = FixedStr.size();
     return Buffer.find(FixedStr);
   }
 
   // Regex match.
 
   // If there are variable uses, we need to create a temporary string with the
   // actual value.
   StringRef RegExToMatch = RegExStr;
   std::string TmpStr;
-  if (!VariableUses.empty()) {
+  SmallVector<StringRef, 4> MatchInfo;
+
+  if (!MatchSubsts.empty()) {
     TmpStr = RegExStr;
 
     unsigned InsertOffset = 0;
-    for (const auto &VariableUse : VariableUses) {
+    // Substitute all pattern variables and numeric expressions whose value is
+    // known just now.  Use of pattern variables defined on the same line are
+    // handled by back-references.  Numeric expressions whose value is known at
+    // parse time (eg. uses of @LINE pseudo variable) are replaced at parse
+    // time.  For numeric expressions using variable defined on the same line,
+    // RegExStr is filled with a suitable wildcard pattern and the constraint
+    // is then verified against the matched value.
+    //
+    // Known issue: Due to the constraints for numeric expressions using
+    // variable defined in earlier line not being expressed at the regular
+    // expression level, the wrong values might be matched, leading to a
+    // constraint check failure.  An example of this is what happens when
+    // checking the line "1 3 4" against the directive
+    // "CHECK: [[#N:]] [[#N+1]]" which gets substituted by
+    // "[[:digit:]]+ [[:digit:]]+".  This would match 1 3 which then fails the
+    // constraint checks.
+    //
+    // One possible solution would be to augment the regular expression engine
+    // to be able to return all matches for a given pattern.  FileCheck could
+    // then test all possibility and fail the check only if none of them
+    // satisfy all numeric expressions.  This would work both for numeric
+    // expression using a numeric variable defined on the same line as well as
+    // numeric expressions with a comparison rather than equality constraint.
+    for (const auto &MatchSubst : MatchSubsts) {
+      // Substitute and check for failure (eg. use of undefined variable).
       std::string Value;
-
-      if (VariableUse.first[0] == '@') {
-        if (!EvaluateExpression(VariableUse.first, Value))
-          return StringRef::npos;
-      } else {
-        StringMap<StringRef>::iterator it =
-            VariableTable.find(VariableUse.first);
-        // If the variable is undefined, return an error.
-        if (it == VariableTable.end())
-          return StringRef::npos;
+      if (MatchSubst.Substitute(Value))
 
-        // Look up the value and escape it so that we can put it into the regex.
-        Value += Regex::escape(it->second);
-      }
-
       // Plop it into the regex at the adjusted offset.
-      TmpStr.insert(TmpStr.begin() + VariableUse.second + InsertOffset,
+      TmpStr.insert(TmpStr.begin() + MatchSubst.GetIndex() + InsertOffset,
                     Value.begin(), Value.end());
       InsertOffset += Value.size();
     }
 
     // Match the newly constructed regex.
     RegExToMatch = TmpStr;
   }
 
-  SmallVector<StringRef, 4> MatchInfo;
+  bool AllNumExprSatisfied;
+  do {
+    AllNumExprSatisfied = true;
     if (!Regex(RegExToMatch, Regex::Newline).match(Buffer, &MatchInfo))
       return StringRef::npos;
 
     // Successful regex match.
     assert(!MatchInfo.empty() && "Didn't get any match");
-  StringRef FullMatch = MatchInfo[0];
 
-  // If this defines any variables, remember their values.
+    // If this defines any pattern variables, remember their values.
     for (const auto &VariableDef : VariableDefs) {
-    assert(VariableDef.second < MatchInfo.size() && "Internal paren error");
-    VariableTable[VariableDef.first] = MatchInfo[VariableDef.second];
+      StringRef Name = VariableDef.first;
+      unsigned CaptureParen = VariableDef.second;
+      assert(CaptureParen < MatchInfo.size() && "Internal paren error");
+      StringRef MatchedStr = MatchInfo[CaptureParen];
+      Context->GlobalVariableTable[Name] = MatchedStr;
+    }
+
+    // Check the matched value satisfies the numeric expression constraint and
+    // store it in the numeric expression if that's the case.
+    for (const auto &CapturedNumericExpression : CapturedNumericExpressions) {
+      assert(CapturedNumericExpression.CaptureParen < MatchInfo.size() &&
+             "Internal paren error");
+      StringRef MatchedStr = MatchInfo[CapturedNumericExpression.CaptureParen];
+      FileCheckNumExpr *NumExpr = CapturedNumericExpression.NumExpr.get();
+
+      // If numeric expression can be evaluated now, do it and error out if
+      // evaluation fails.
+      bool UnconstrainedVarDef = (NumExpr->GetAST() == nullptr);
+      if (!UnconstrainedVarDef) {
+        if (NumExpr->SetValueFromEval())
+          return StringRef::npos;
+      }
+
+      // Get numeric value from the matched string according to matching format
+      // of the numeric expression.  Error out if this fails.
+      FileCheckNumExprVal MatchedVal;
+      if (NumExpr->ValueFromStringRepr(MatchedStr, MatchedVal)) {
+        SM.PrintMessage(SMLoc::getFromPointer(MatchedStr.data()),
+                        SourceMgr::DK_Error,
+                        "Cannot represent numeric value " + MatchedStr);
+        return StringRef::npos;
+      }
+
+      // Now verify the constraint of the numeric expression.
+      if (NumExpr->VerifyConstraint(MatchedVal)) {
+        AllNumExprSatisfied = false;
+        // Try matching again from the line following the one matched.  There
+        // might be over match in the current line but we have no way to ask
+        // for them to the regular expression engine.  However this hazard can
+        // be alleviated if the user write a CHECK pattern that has numeric
+        // expression for all numeric values the line to match contains.
+        Buffer = Buffer.substr(Buffer.find_first_of('\n')).substr(1);
+        break;
       }
 
+      // Store verified matched value.  This will set variable defined by the
+      // expression if any.
+      if (UnconstrainedVarDef) {
+        if (NumExpr->SetTentativeValue(MatchedVal))
+          assert(false && "Value of numeric expression already set");
+      }
+    }
+  } while (!AllNumExprSatisfied && !Buffer.empty());
+
+  // All constraints satisfied, make variable definitions final.
+  if (AllNumExprSatisfied) {
+    for (const auto &CapturedNumericExpression : CapturedNumericExpressions) {
+      FileCheckNumExpr *NumExpr = CapturedNumericExpression.NumExpr.get();
+      NumExpr->CommitValue();
+    }
+    // No line with all constraints satisfied found, return failure to match.
+  } else
+    return StringRef::npos;
+
   // Like CHECK-NEXT, CHECK-EMPTY's match range is considered to start after
   // the required preceding newline, which is consumed by the pattern in the
   // case of CHECK-EMPTY but not CHECK-NEXT.
   size_t MatchStartSkip = CheckTy == Check::CheckEmpty;
+  StringRef FullMatch = MatchInfo[0];
   MatchLen = FullMatch.size() - MatchStartSkip;
   return FullMatch.data() - Buffer.data() + MatchStartSkip;
 }
 
-
 /// Computes an arbitrary estimate for the quality of matching this pattern at
 /// the start of \p Buffer; a distance of zero should correspond to a perfect
 /// match.
-unsigned
-FileCheckPattern::ComputeMatchDistance(StringRef Buffer,
-                              const StringMap<StringRef> &VariableTable) const {
+unsigned FileCheckPattern::ComputeMatchDistance(StringRef Buffer) const {
   // Just compute the number of matching characters. For regular expressions, we
   // just compare against the regex itself and hope for the best.
   //
   // FIXME: One easy improvement here is have the regex lib generate a single
   // example regular expression which matches, and use that as the example
   // string.
   StringRef ExampleString(FixedStr);
   if (ExampleString.empty())
     ExampleString = RegExStr;
 
   // Only compare up to the first line in the buffer, or the string size.
   StringRef BufferPrefix = Buffer.substr(0, ExampleString.size());
   BufferPrefix = BufferPrefix.split('\n').first;
   return BufferPrefix.edit_distance(ExampleString);
 }
 
-void FileCheckPattern::PrintVariableUses(const SourceMgr &SM, StringRef Buffer,
-                                const StringMap<StringRef> &VariableTable,
+/// Print value of successful substitutions or name of undefined pattern or
+/// numeric variables preventing such a successful substitution.
+///
+/// Note: Numeric expressions known at parse time are not shown here since no
+/// substitution gets created for them but hopefully if the value is known at
+/// parse time the value should be obvious (except in case of bug in FileCheck
+/// itself).  Numeric expression using numeric variables defined on the same
+/// line are not shown either.
+void FileCheckPattern::PrintSubsts(const SourceMgr &SM, StringRef Buffer,
                                    SMRange MatchRange) const {
-  // If this was a regular expression using variables, print the current
-  // variable values.
-  if (!VariableUses.empty()) {
-    for (const auto &VariableUse : VariableUses) {
+  // Print info what we know about substitutions.  This covers both uses of
+  // pattern variables and numeric subsitutions as long as they only use
+  // variables defined in earlier lines.
+  if (!AllSubsts.empty()) {
+    for (const auto &Subst : AllSubsts) {
       SmallString<256> Msg;
       raw_svector_ostream OS(Msg);
-      StringRef Var = VariableUse.first;
-      if (Var[0] == '@') {
-        std::string Value;
-        if (EvaluateExpression(Var, Value)) {
-          OS << "with expression \"";
-          OS.write_escaped(Var) << "\" equal to \"";
-          OS.write_escaped(Value) << "\"";
-        } else {
-          OS << "uses incorrect expression \"";
-          OS.write_escaped(Var) << "\"";
-        }
-      } else {
-        StringMap<StringRef>::const_iterator it = VariableTable.find(Var);
+      bool IsNumExpr = Subst.IsNumExpr();
+      std::string Val;
 
-        // Check for undefined variable references.
-        if (it == VariableTable.end()) {
-          OS << "uses undefined variable \"";
-          OS.write_escaped(Var) << "\"";
-        } else {
+      // Substitution failed or is not known at match time, print undefined
+      // variables it uses.
+      if (Subst.MatchedValue(Val)) {
+        std::vector<StringRef> UndefVarNames;
+        Subst.GetUndefVarNames(UndefVarNames);
+        if (UndefVarNames.empty())
+          continue;
+        if (IsNumExpr)
+          OS << "uses undefined numeric variables";
+        else
+          OS << "uses undefined variable";
+        for (auto UndefVarName : UndefVarNames) {
+          OS << " \"";
+          OS.write_escaped(UndefVarName) << "\"";
+        }
+        // Substitution succeeded and numeric expression satisfied its
+        // constraint.  Print substituted value.
+        if (IsNumExpr)
+          OS << "with numeric expression \"";
+        else
           OS << "with variable \"";
-          OS.write_escaped(Var) << "\" equal to \"";
-          OS.write_escaped(it->second) << "\"";
-        }
+        OS.write_escaped(Subst.GetSubstString()) << "\" equal to \"";
+        OS.write_escaped(Val) << "\"";
       }
 
       if (MatchRange.isValid())
         SM.PrintMessage(MatchRange.Start, SourceMgr::DK_Note, OS.str(),
                         {MatchRange});
       else
         SM.PrintMessage(SMLoc::getFromPointer(Buffer.data()),
                         SourceMgr::DK_Note, OS.str());
if (Diags) {
     else
       Diags->emplace_back(SM, CheckTy, Loc, MatchTy, Range);
   }
   return Range;
 }
 
 void FileCheckPattern::PrintFuzzyMatch(
     const SourceMgr &SM, StringRef Buffer,
-    const StringMap<StringRef> &VariableTable,
     std::vector<FileCheckDiag> *Diags) const {
   // Attempt to find the closest/best fuzzy match.  Usually an error happens
   // because some string in the output didn't exactly match. In these cases, we
   // would like to show the user a best guess at what "should have" matched, to
   // save them having to actually check the input manually.
   size_t NumLinesForward = 0;
   size_t Best = StringRef::npos;
   double BestQuality = 0;
 
   // Use an arbitrary 4k limit on how far we will search.
   for (size_t i = 0, e = std::min(size_t(4096), Buffer.size()); i != e; ++i) {
     if (Buffer[i] == '\n')
       ++NumLinesForward;
 
     // Patterns have leading whitespace stripped, so skip whitespace when
     // looking for something which looks like a pattern.
     if (Buffer[i] == ' ' || Buffer[i] == '\t')
       continue;
 
     // Compute the "quality" of this match as an arbitrary combination of the
     // match distance and the number of lines skipped to get to this match.
-    unsigned Distance = ComputeMatchDistance(Buffer.substr(i), VariableTable);
+    unsigned Distance = ComputeMatchDistance(Buffer.substr(i));
     double Quality = Distance + (NumLinesForward / 100.);
 
     if (Quality < BestQuality || Best == StringRef::npos) {
       Best = i;
       BestQuality = Quality;
     }
   }
 
   // Print the "possible intended match here" line if we found something
   // reasonable and not equal to what we showed in the "scanning from here"
   // line.
   if (Best && Best != StringRef::npos && BestQuality < 50) {
     SMRange MatchRange =
         ProcessMatchResult(FileCheckDiag::MatchFuzzy, SM, getLoc(),
                            getCheckTy(), Buffer, Best, 0, Diags);
     SM.PrintMessage(MatchRange.Start, SourceMgr::DK_Note,
                     "possible intended match here");
 
     // FIXME: If we wanted to be really friendly we would show why the match
     // failed, as it can be hard to spot simple one character differences.
   }
 }
 
+/// Store in \p VarValue the matched value for pattern variable \p VarName if
+/// defined.  Return whether \p VarName is undefined.
+bool FileCheckPatternContext::GetPatternVarValue(StringRef VarName,
+                                                 StringRef &VarValue) {
+  auto git = GlobalVariableTable.find(VarName);
+  if (git == GlobalVariableTable.end())
+    return true;
+
+  VarValue = git->second;
+  return false;
+}
+
 /// Finds the closing sequence of a regex variable usage or definition.
 ///
 /// \p Str has to point in the beginning of the definition (right after the
 /// opening sequence). Returns the offset of the closing sequence within Str,
 /// or npos if it was not found.
 size_t FileCheckPattern::FindRegexVarEnd(StringRef Str, SourceMgr &SM) {
   // Offset keeps track of the current offset within the input Str
   size_t Offset = 0;
FindFirstMatchingPrefix(Regex &PrefixRE, StringRef &Buffer,
   // We ran out of buffer while skipping partial matches so give up.
   return {StringRef(), StringRef()};
 }
 
 /// Read the check file, which specifies the sequence of expected strings.
 ///
 /// The strings are added to the CheckStrings vector. Returns true in case of
 /// an error, false otherwise.
-bool llvm::FileCheck::ReadCheckFile(SourceMgr &SM, StringRef Buffer,
-                                    Regex &PrefixRE,
-                                    std::vector<FileCheckString> &CheckStrings) {
+bool llvm::FileCheck::ReadCheckFile(
+    SourceMgr &SM, StringRef Buffer, Regex &PrefixRE,
+  auto *PatternContext = new FileCheckPatternContext();
+  // Process command-line definition of variables at parse time so that numeric
+  // expression can refer to numeric variable defined on the command-line.
+  if (PatternContext->DefineCmdlineVariables(Req.GlobalDefines, SM))
+    return true;
+
   std::vector<FileCheckPattern> ImplicitNegativeChecks;
   for (const auto &PatternString : Req.ImplicitCheckNot) {
     // Create a buffer with fake command line content in order to display the
     // command line option responsible for the specific implicit CHECK-NOT.
     std::string Prefix = "-implicit-check-not='";
     std::string Suffix = "'";
     std::unique_ptr<MemoryBuffer> CmdLine = MemoryBuffer::getMemBufferCopy(
         Prefix + PatternString + Suffix, "command line");
 
     StringRef PatternInBuffer =
         CmdLine->getBuffer().substr(Prefix.size(), PatternString.size());
     SM.AddNewSourceBuffer(std::move(CmdLine), SMLoc());
 
-    ImplicitNegativeChecks.push_back(FileCheckPattern(Check::CheckNot));
+    ImplicitNegativeChecks.push_back(
+        FileCheckPattern(Check::CheckNot, PatternContext));
     ImplicitNegativeChecks.back().ParsePattern(PatternInBuffer,
                                                "IMPLICIT-CHECK", SM, 0, Req);
   }
 
   std::vector<FileCheckPattern> DagNotMatches = ImplicitNegativeChecks;
 
   // LineNumber keeps track of the line on which CheckPrefix instances are
   // found.
while (1) {
 
     // Scan ahead to the end of line.
     size_t EOL = Buffer.find_first_of("\n\r");
 
     // Remember the location of the start of the pattern, for diagnostics.
     SMLoc PatternLoc = SMLoc::getFromPointer(Buffer.data());
 
     // Parse the pattern.
-    FileCheckPattern P(CheckTy);
+    FileCheckPattern P(CheckTy, PatternContext);
     if (P.ParsePattern(Buffer.substr(0, EOL), UsedPrefix, SM, LineNumber, Req))
       return true;
 
     // Verify that CHECK-LABEL lines do not define or use variables
     if ((CheckTy == Check::CheckLabel) && P.hasVariable()) {
       SM.PrintMessage(
           SMLoc::getFromPointer(UsedPrefixStart), SourceMgr::DK_Error,
           "found '" + UsedPrefix + "-LABEL:'"
while (1) {
     CheckStrings.emplace_back(P, UsedPrefix, PatternLoc);
     std::swap(DagNotMatches, CheckStrings.back().DagNotStrings);
     DagNotMatches = ImplicitNegativeChecks;
   }
 
   // Add an EOF pattern for any trailing CHECK-DAG/-NOTs, and use the first
   // prefix as a filler for the error message.
   if (!DagNotMatches.empty()) {
-    CheckStrings.emplace_back(FileCheckPattern(Check::CheckEOF), *Req.CheckPrefixes.begin(),
+    CheckStrings.emplace_back(FileCheckPattern(Check::CheckEOF, PatternContext),
+                              *Req.CheckPrefixes.begin(),
                               SMLoc::getFromPointer(Buffer.data()));
     std::swap(DagNotMatches, CheckStrings.back().DagNotStrings);
   }
 
   if (CheckStrings.empty()) {
     errs() << "error: no check strings found with prefix"
            << (Req.CheckPrefixes.size() > 1 ? "es " : " ");
     auto I = Req.CheckPrefixes.begin();
if (CheckStrings.empty()) {
     return true;
   }
 
   return false;
 }
 
 static void PrintMatch(bool ExpectedMatch, const SourceMgr &SM,
                        StringRef Prefix, SMLoc Loc, const FileCheckPattern &Pat,
-                       int MatchedCount, StringRef Buffer,
-                       StringMap<StringRef> &VariableTable, size_t MatchPos,
+                       int MatchedCount, StringRef Buffer, size_t MatchPos,
                        size_t MatchLen, const FileCheckRequest &Req,
                        std::vector<FileCheckDiag> *Diags) {
   if (ExpectedMatch) {
     if (!Req.Verbose)
       return;
     if (!Req.VerboseVerbose && Pat.getCheckTy() == Check::CheckEOF)
       return;
   }
   SMRange MatchRange = ProcessMatchResult(
       ExpectedMatch ? FileCheckDiag::MatchFoundAndExpected
                     : FileCheckDiag::MatchFoundButExcluded,
       SM, Loc, Pat.getCheckTy(), Buffer, MatchPos, MatchLen, Diags);
   std::string Message = formatv("{0}: {1} string found in input",
                                 Pat.getCheckTy().getDescription(Prefix),
                                 (ExpectedMatch ? "expected" : "excluded"))
                             .str();
   if (Pat.getCount() > 1)
     Message += formatv(" ({0} out of {1})", MatchedCount, Pat.getCount()).str();
 
   SM.PrintMessage(
       Loc, ExpectedMatch ? SourceMgr::DK_Remark : SourceMgr::DK_Error, Message);
   SM.PrintMessage(MatchRange.Start, SourceMgr::DK_Note, "found here",
                   {MatchRange});
-  Pat.PrintVariableUses(SM, Buffer, VariableTable, MatchRange);
+  Pat.PrintSubsts(SM, Buffer, MatchRange);
 }
 
 static void PrintMatch(bool ExpectedMatch, const SourceMgr &SM,
                        const FileCheckString &CheckStr, int MatchedCount,
-                       StringRef Buffer, StringMap<StringRef> &VariableTable,
-                       size_t MatchPos, size_t MatchLen, FileCheckRequest &Req,
+                       StringRef Buffer, size_t MatchPos, size_t MatchLen,
+                       FileCheckRequest &Req,
                        std::vector<FileCheckDiag> *Diags) {
   PrintMatch(ExpectedMatch, SM, CheckStr.Prefix, CheckStr.Loc, CheckStr.Pat,
-             MatchedCount, Buffer, VariableTable, MatchPos, MatchLen, Req,
-             Diags);
+             MatchedCount, Buffer, MatchPos, MatchLen, Req, Diags);
 }
 
 static void PrintNoMatch(bool ExpectedMatch, const SourceMgr &SM,
                          StringRef Prefix, SMLoc Loc,
                          const FileCheckPattern &Pat, int MatchedCount,
-                         StringRef Buffer, StringMap<StringRef> &VariableTable,
-                         bool VerboseVerbose,
+                         StringRef Buffer, bool VerboseVerbose,
                          std::vector<FileCheckDiag> *Diags) {
   if (!ExpectedMatch && !VerboseVerbose)
     return;
 
   // Otherwise, we have an error, emit an error message.
   std::string Message = formatv("{0}: {1} string not found in input",
                                 Pat.getCheckTy().getDescription(Prefix),
                                 (ExpectedMatch ? "expected" : "excluded"))
static void PrintNoMatch(bool ExpectedMatch, const SourceMgr &SM,
   Buffer = Buffer.substr(Buffer.find_first_not_of(" \t\n\r"));
   SMRange SearchRange = ProcessMatchResult(
       ExpectedMatch ? FileCheckDiag::MatchNoneButExpected
                     : FileCheckDiag::MatchNoneAndExcluded,
       SM, Loc, Pat.getCheckTy(), Buffer, 0, Buffer.size(), Diags);
   SM.PrintMessage(SearchRange.Start, SourceMgr::DK_Note, "scanning from here");
 
   // Allow the pattern to print additional information if desired.
-  Pat.PrintVariableUses(SM, Buffer, VariableTable);
+  Pat.PrintSubsts(SM, Buffer);
 
   if (ExpectedMatch)
-    Pat.PrintFuzzyMatch(SM, Buffer, VariableTable, Diags);
+    Pat.PrintFuzzyMatch(SM, Buffer, Diags);
 }
 
 static void PrintNoMatch(bool ExpectedMatch, const SourceMgr &SM,
                          const FileCheckString &CheckStr, int MatchedCount,
-                         StringRef Buffer, StringMap<StringRef> &VariableTable,
-                         bool VerboseVerbose,
+                         StringRef Buffer, bool VerboseVerbose,
                          std::vector<FileCheckDiag> *Diags) {
   PrintNoMatch(ExpectedMatch, SM, CheckStr.Prefix, CheckStr.Loc, CheckStr.Pat,
-               MatchedCount, Buffer, VariableTable, VerboseVerbose, Diags);
+               MatchedCount, Buffer, VerboseVerbose, Diags);
 }
 
 /// Count the number of newlines in the specified range.
 static unsigned CountNumNewlinesBetween(StringRef Range,
                                         const char *&FirstNewLine) {
   unsigned NumNewLines = 0;
   while (1) {
     // Scan for newline.
while (1) {
     if (NumNewLines == 1)
       FirstNewLine = Range.begin();
   }
 }
 
 /// Match check string and its "not strings" and/or "dag strings".
 size_t FileCheckString::Check(const SourceMgr &SM, StringRef Buffer,
                               bool IsLabelScanMode, size_t &MatchLen,
-                              StringMap<StringRef> &VariableTable,
                               FileCheckRequest &Req,
                               std::vector<FileCheckDiag> *Diags) const {
   size_t LastPos = 0;
   std::vector<const FileCheckPattern *> NotStrings;
 
   // IsLabelScanMode is true when we are scanning forward to find CHECK-LABEL
   // bounds; we have not processed variable definitions within the bounded block
   // yet so cannot handle any final CHECK-DAG yet; this is handled when going
   // over the block again (including the last CHECK-LABEL) in normal mode.
   if (!IsLabelScanMode) {
     // Match "dag strings" (with mixed "not strings" if any).
-    LastPos = CheckDag(SM, Buffer, NotStrings, VariableTable, Req, Diags);
+    LastPos = CheckDag(SM, Buffer, NotStrings, Req, Diags);
     if (LastPos == StringRef::npos)
       return StringRef::npos;
   }
 
   // Match itself from the last position after matching CHECK-DAG.
   size_t LastMatchEnd = LastPos;
   size_t FirstMatchPos = 0;
   // Go match the pattern Count times. Majority of patterns only match with
   // count 1 though.
   assert(Pat.getCount() != 0 && "pattern count can not be zero");
   for (int i = 1; i <= Pat.getCount(); i++) {
     StringRef MatchBuffer = Buffer.substr(LastMatchEnd);
     size_t CurrentMatchLen;
     // get a match at current start point
-    size_t MatchPos = Pat.Match(MatchBuffer, CurrentMatchLen, VariableTable);
+    size_t MatchPos = Pat.Match(MatchBuffer, CurrentMatchLen, SM);
     if (i == 1)
       FirstMatchPos = LastPos + MatchPos;
 
     // report
     if (MatchPos == StringRef::npos) {
-      PrintNoMatch(true, SM, *this, i, MatchBuffer, VariableTable,
-                   Req.VerboseVerbose, Diags);
+      PrintNoMatch(true, SM, *this, i, MatchBuffer, Req.VerboseVerbose, Diags);
       return StringRef::npos;
     }
-    PrintMatch(true, SM, *this, i, MatchBuffer, VariableTable, MatchPos,
-               CurrentMatchLen, Req, Diags);
+    PrintMatch(true, SM, *this, i, MatchBuffer, MatchPos, CurrentMatchLen, Req,
+               Diags);
 
     // move start point after the match
     LastMatchEnd += MatchPos + CurrentMatchLen;
   }
   // Full match len counts from first match pos.
   MatchLen = LastMatchEnd - FirstMatchPos;
 
   // Similar to the above, in "label-scan mode" we can't yet handle CHECK-NEXT
if (CheckSame(SM, SkippedRegion)) {
       ProcessMatchResult(FileCheckDiag::MatchFoundButWrongLine, SM, Loc,
                          Pat.getCheckTy(), MatchBuffer, MatchPos, MatchLen,
                          Diags, Req.Verbose);
       return StringRef::npos;
     }
 
     // If this match had "not strings", verify that they don't exist in the
     // skipped region.
-    if (CheckNot(SM, SkippedRegion, NotStrings, VariableTable, Req, Diags))
+    if (CheckNot(SM, SkippedRegion, NotStrings, Req, Diags))
       return StringRef::npos;
   }
 
   return FirstMatchPos;
 }
 
 /// Verify there is a single line in the given buffer.
 bool FileCheckString::CheckNext(const SourceMgr &SM, StringRef Buffer) const {
bool FileCheckString::CheckSame(const SourceMgr &SM, StringRef Buffer) const {
 
   return false;
 }
 
 /// Verify there's no "not strings" in the given buffer.
 bool FileCheckString::CheckNot(
     const SourceMgr &SM, StringRef Buffer,
     const std::vector<const FileCheckPattern *> &NotStrings,
-    StringMap<StringRef> &VariableTable, const FileCheckRequest &Req,
-    std::vector<FileCheckDiag> *Diags) const {
+    const FileCheckRequest &Req, std::vector<FileCheckDiag> *Diags) const {
   for (const FileCheckPattern *Pat : NotStrings) {
     assert((Pat->getCheckTy() == Check::CheckNot) && "Expect CHECK-NOT!");
 
     size_t MatchLen = 0;
-    size_t Pos = Pat->Match(Buffer, MatchLen, VariableTable);
+    size_t Pos = Pat->Match(Buffer, MatchLen, SM);
 
     if (Pos == StringRef::npos) {
       PrintNoMatch(false, SM, Prefix, Pat->getLoc(), *Pat, 1, Buffer,
-                   VariableTable, Req.VerboseVerbose, Diags);
+                   Req.VerboseVerbose, Diags);
       continue;
     }
 
-    PrintMatch(false, SM, Prefix, Pat->getLoc(), *Pat, 1, Buffer, VariableTable,
-               Pos, MatchLen, Req, Diags);
+    PrintMatch(false, SM, Prefix, Pat->getLoc(), *Pat, 1, Buffer, Pos, MatchLen,
+               Req, Diags);
 
     return true;
   }
 
   return false;
 }
 
 /// Match "dag strings" and their mixed "not strings".
 size_t
 FileCheckString::CheckDag(const SourceMgr &SM, StringRef Buffer,
                           std::vector<const FileCheckPattern *> &NotStrings,
-                          StringMap<StringRef> &VariableTable,
                           const FileCheckRequest &Req,
                           std::vector<FileCheckDiag> *Diags) const {
   if (DagNotStrings.empty())
     return 0;
 
   // The start of the search range.
   size_t StartPos = 0;
 
for (auto PatItr = DagNotStrings.begin(), PatEnd = DagNotStrings.end();
 
     // CHECK-DAG always matches from the start.
     size_t MatchLen = 0, MatchPos = StartPos;
 
     // Search for a match that doesn't overlap a previous match in this
     // CHECK-DAG group.
     for (auto MI = MatchRanges.begin(), ME = MatchRanges.end(); true; ++MI) {
       StringRef MatchBuffer = Buffer.substr(MatchPos);
-      size_t MatchPosBuf = Pat.Match(MatchBuffer, MatchLen, VariableTable);
+      size_t MatchPosBuf = Pat.Match(MatchBuffer, MatchLen, SM);
       // With a group of CHECK-DAGs, a single mismatching means the match on
       // that group of CHECK-DAGs fails immediately.
       if (MatchPosBuf == StringRef::npos) {
         PrintNoMatch(true, SM, Prefix, Pat.getLoc(), Pat, 1, MatchBuffer,
-                     VariableTable, Req.VerboseVerbose, Diags);
+                     Req.VerboseVerbose, Diags);
         return StringRef::npos;
       }
       // Re-calc it as the offset relative to the start of the original string.
       MatchPos += MatchPosBuf;
       if (Req.VerboseVerbose)
-        PrintMatch(true, SM, Prefix, Pat.getLoc(), Pat, 1, Buffer,
-                   VariableTable, MatchPos, MatchLen, Req, Diags);
+        PrintMatch(true, SM, Prefix, Pat.getLoc(), Pat, 1, Buffer, MatchPos,
+                   MatchLen, Req, Diags);
       MatchRange M{MatchPos, MatchPos + MatchLen};
       if (Req.AllowDeprecatedDagOverlap) {
         // We don't need to track all matches in this mode, so we just maintain
         // one match range that encompasses the current CHECK-DAG group's
         // matches.
         if (MatchRanges.empty())
           MatchRanges.insert(MatchRanges.end(), M);
         else {
for (auto MI = MatchRanges.begin(), ME = MatchRanges.end(); true; ++MI) {
                         "match discarded, overlaps earlier DAG match here",
                         {OldRange});
         if (Diags)
           Diags->rbegin()->MatchTy = FileCheckDiag::MatchFoundButDiscarded;
       }
       MatchPos = MI->End;
     }
     if (!Req.VerboseVerbose)
-      PrintMatch(true, SM, Prefix, Pat.getLoc(), Pat, 1, Buffer, VariableTable,
-                 MatchPos, MatchLen, Req, Diags);
+      PrintMatch(true, SM, Prefix, Pat.getLoc(), Pat, 1, Buffer, MatchPos,
+                 MatchLen, Req, Diags);
 
     // Handle the end of a CHECK-DAG group.
     if (std::next(PatItr) == PatEnd ||
         std::next(PatItr)->getCheckTy() == Check::CheckNot) {
       if (!NotStrings.empty()) {
         // If there are CHECK-NOTs between two CHECK-DAGs or from CHECK to
         // CHECK-DAG, verify that there are no 'not' strings occurred in that
         // region.
         StringRef SkippedRegion =
             Buffer.slice(StartPos, MatchRanges.begin()->Pos);
-        if (CheckNot(SM, SkippedRegion, NotStrings, VariableTable, Req, Diags))
+        if (CheckNot(SM, SkippedRegion, NotStrings, Req, Diags))
           return StringRef::npos;
         // Clear "not strings".
         NotStrings.clear();
       }
       // All subsequent CHECK-DAGs and CHECK-NOTs should be matched from the
       // end of this CHECK-DAG group's match range.
       StartPos = MatchRanges.rbegin()->End;
       // Don't waste time checking for (impossible) overlaps before that.
if (Prefix != Req.CheckPrefixes.front())
       PrefixRegexStr.push_back('|');
 
     PrefixRegexStr.append(Prefix);
   }
 
   return Regex(PrefixRegexStr);
 }
 
-// Remove local variables from \p VariableTable. Global variables
-// (start with '$') are preserved.
-static void ClearLocalVars(StringMap<StringRef> &VariableTable) {
-  SmallVector<StringRef, 16> LocalVars;
-  for (const auto &Var : VariableTable)
+/// Define pattern and numeric variables from definitions given on the command
+/// line passed as a vector of VAR=VAL strings in \p CmdlineDefines.  Report
+/// any error to \p SM.
+bool FileCheckPatternContext::DefineCmdlineVariables(
+    std::vector<std::string> &CmdlineDefines, SourceMgr &SM) {
+  static bool CmdlineVariablesDefined = false;
+
+  if (CmdlineVariablesDefined)
+    return true;
+  CmdlineVariablesDefined = true;
+
+  // Dummy pattern to call ParseNumericExpression
+  FileCheckPattern P(Check::CheckPlain, this);
+
+  bool ErrorFound = false;
+  for (const auto &CmdlineDef : CmdlineDefines) {
+    // Numeric variable definition.  Same format as numeric expression with
+    // variable definition where ':' is replaced by '='
+    if (CmdlineDef[0] == '#') {
+      // Copy command-line definition text with leading '#' stripped and
+      // replace '=' by ':' to be able to reuse ParseNumericExpression.
+      // Create a buffer with fake command line content in order to display
+      // parsing diagnostic with location information and point to the
+      // command-line option with invalid syntax.
+      std::string Prefix = "-D";
+      std::string Suffix1 = " (parsed as: [[";
+      std::string Suffix2 = CmdlineDef;
+      size_t EqIdx = Suffix2.find('=');
+      Suffix2[EqIdx] = ':';
+      std::string Suffix3 = "]])";
+      std::string DiagCmdline =
+          Prefix + CmdlineDef + Suffix1 + Suffix2 + Suffix3;
+      std::unique_ptr<MemoryBuffer> CmdLine =
+          MemoryBuffer::getMemBufferCopy(DiagCmdline, "command line");
+      StringRef DiagCmdlineDefRef = CmdLine->getBuffer();
+      SM.AddNewSourceBuffer(std::move(CmdLine), SMLoc());
+
+      // Now parse to both check syntax is correct and create the necessary
+      // class instance.
+      size_t NumExprStartIdx =
+          Prefix.size() + CmdlineDef.size() + Suffix1.size() + 1;
+      StringRef CmdlineDefRef =
+          DiagCmdlineDefRef.substr(NumExprStartIdx).drop_back(Suffix3.size());
+      std::shared_ptr<FileCheckNumExprVar> NumVarDef;
+      std::shared_ptr<FileCheckNumExpr> NumExpr =
+          P.ParseNumericExpression(CmdlineDefRef, NumVarDef, SM);
+      if (NumVarDef == nullptr) {
+        ErrorFound = true;
+        continue;
+      }
+      NumExpr->SetValueFromEval();
+
+      // Record this variable definition.
+      GlobalNumericVariableTable[NumVarDef->GetName()] = NumVarDef;
+      // Pattern variable definition
+    } else {
+      std::string Prefix = "-D";
+      std::string DiagCmdline = Prefix + CmdlineDef;
+      std::unique_ptr<MemoryBuffer> CmdLine =
+          MemoryBuffer::getMemBufferCopy(DiagCmdline, "command line");
+      StringRef CmdlineDefRef = CmdLine->getBuffer().substr(Prefix.size());
+      SM.AddNewSourceBuffer(std::move(CmdLine), SMLoc());
+
+      bool IsPseudo;
+      unsigned TrailIdx;
+      std::pair<StringRef, StringRef> CmdlineNameVal = CmdlineDefRef.split('=');
+      StringRef Name = CmdlineNameVal.first;
+      if (P.ParseVariable(Name, IsPseudo, TrailIdx) || IsPseudo ||
+          TrailIdx != Name.size()) {
+        SM.PrintMessage(SMLoc::getFromPointer(CmdlineDefRef.data()),
+                        SourceMgr::DK_Error,
+                        "Invalid name for variable definition '" + Name + "'");
+        ErrorFound = true;
+        continue;
+      }
+      GlobalVariableTable.insert(CmdlineDefRef.split('='));
+    }
+  }
+
+  return ErrorFound;
+}
+
+/// Undefine local variables (variables whose name does not start with a '$'
+/// sign), ie remove them from GlobalVariableTable.
+void FileCheckPatternContext::ClearLocalVars(void) {
+  SmallVector<StringRef, 16> LocalPatternVars, LocalNumericVars;
+  for (const auto &Var : GlobalVariableTable)
+    if (Var.first()[0] != '$')
+      LocalPatternVars.push_back(Var.first());
+  for (const auto &Var : GlobalNumericVariableTable)
     if (Var.first()[0] != '$')
-      LocalVars.push_back(Var.first());
+      LocalNumericVars.push_back(Var.first());
 
-  for (const auto &Var : LocalVars)
-    VariableTable.erase(Var);
+  for (const auto &Var : LocalPatternVars)
+    GlobalVariableTable.erase(Var);
+  for (const auto &Var : LocalNumericVars)
+    GlobalNumericVariableTable.erase(Var);
 }
 
 /// Check the input to FileCheck provided in the \p Buffer against the \p
 /// CheckStrings read from the check file.
 ///
 /// Returns false if the input fails to satisfy the checks.
 bool llvm::FileCheck::CheckInput(SourceMgr &SM, StringRef Buffer,
                                  ArrayRef<FileCheckString> CheckStrings,
                                  std::vector<FileCheckDiag> *Diags) {
   bool ChecksFailed = false;
 
-  /// VariableTable - This holds all the current filecheck variables.
-  StringMap<StringRef> VariableTable;
-
-  for (const auto& Def : Req.GlobalDefines)
-    VariableTable.insert(StringRef(Def).split('='));
-
+  FileCheckPatternContext *Context =
+      CheckStrings.empty() ? nullptr : CheckStrings[0].Pat.GetContext();
   unsigned i = 0, j = 0, e = CheckStrings.size();
   while (true) {
     StringRef CheckRegion;
     if (j == e) {
       CheckRegion = Buffer;
     } else {
       const FileCheckString &CheckLabelStr = CheckStrings[j];
       if (CheckLabelStr.Pat.getCheckTy() != Check::CheckLabel) {
         ++j;
         continue;
       }
 
       // Scan to next CHECK-LABEL match, ignoring CHECK-NOT and CHECK-DAG
       size_t MatchLabelLen = 0;
-      size_t MatchLabelPos = CheckLabelStr.Check(
-          SM, Buffer, true, MatchLabelLen, VariableTable, Req, Diags);
+      size_t MatchLabelPos =
+          CheckLabelStr.Check(SM, Buffer, true, MatchLabelLen, Req, Diags);
       if (MatchLabelPos == StringRef::npos)
-        // Immediately bail of CHECK-LABEL fails, nothing else we can do.
+        // Immediately bail if CHECK-LABEL fails, nothing else we can do.
         return false;
 
       CheckRegion = Buffer.substr(0, MatchLabelPos + MatchLabelLen);
       Buffer = Buffer.substr(MatchLabelPos + MatchLabelLen);
       ++j;
     }
 
-    if (Req.EnableVarScope)
-      ClearLocalVars(VariableTable);
+    if (Req.EnableVarScope && Context != nullptr)
+      Context->ClearLocalVars();
 
     for (; i != j; ++i) {
       const FileCheckString &CheckStr = CheckStrings[i];
 
       // Check each string within the scanned region, including a second check
       // of any final CHECK-LABEL (to verify CHECK-NOT and CHECK-DAG)
       size_t MatchLen = 0;
-      size_t MatchPos = CheckStr.Check(SM, CheckRegion, false, MatchLen,
-                                       VariableTable, Req, Diags);
+      size_t MatchPos =
+          CheckStr.Check(SM, CheckRegion, false, MatchLen, Req, Diags);
 
       if (MatchPos == StringRef::npos) {
         ChecksFailed = true;
         i = j;
         break;
       }
 
       CheckRegion = CheckRegion.substr(MatchPos + MatchLen);
     }
 
     if (j == e)
       break;
   }
+  delete Context;
 
   // Success if no checks failed.
   return !ChecksFailed;
 }

test/FileCheck/defines.txt

 ; RUN: FileCheck -DVALUE=10 -input-file %s %s
 ; RUN: not FileCheck -DVALUE=20 -input-file %s %s 2>&1 | FileCheck %s -check-prefix ERRMSG
-;
 ; RUN: not FileCheck -DVALUE=10 -check-prefix NOT -input-file %s %s 2>&1 | FileCheck %s -check-prefix NOT-ERRMSG
 ; RUN: FileCheck -DVALUE=20 -check-prefix NOT -input-file %s %s
 ; RUN: not FileCheck -DVALUE10 -input-file %s %s 2>&1 | FileCheck %s -check-prefix ERRCLI
+; RUN: not FileCheck -D10VALUE=10 -input-file %s %s 2>&1 | FileCheck %s -check-prefix ERRCLIFMT
+; RUN: not FileCheck -D@VALUE=10 -input-file %s %s 2>&1 | FileCheck %s -check-prefix ERRCLIPSEUDO
+; RUN: not FileCheck -D'VALUE + 2=10' -input-file %s %s 2>&1 | FileCheck %s -check-prefix ERRCLITRAIL
+; RUN: FileCheck -D#%X,NUMVAL1=8 -D#NUMVAL2=NUMVAL1+4 -check-prefix CHECKNUM -input-file %s %s
+; RUN: not FileCheck -D#%X,NUMVAL1=8 -D#NUMVAL2=NUMVAL1+6 -check-prefix CHECKNUM -input-file %s %s 2>&1 | FileCheck %s -check-prefix NUMERRMSG
+; RUN: not FileCheck -D#%X,NUMVAL1=8 -D#NUMVAL2=NUMVAL1+4 -check-prefix NUMNOT -input-file %s %s 2>&1 | FileCheck %s -check-prefix NOT-NUMERRMSG
+; RUN: FileCheck -D#%X,NUMVAL1=8 -D#NUMVAL2=NUMVAL1+6 -check-prefixes NUMNOT -input-file %s %s
+; RUN: not FileCheck -D#,VALUE=10 -input-file %s %s 2>&1 | FileCheck %s -check-prefix NUMERRCLI
 
 Value = 10
 ; CHECK: Value = [[VALUE]]
 ; NOT-NOT: Value = [[VALUE]]
 
-; ERRMSG: defines.txt:9:10: error: CHECK: expected string not found in input
+; ERRMSG: defines.txt:[[#@LINE-3]]:10: error: CHECK: expected string not found in input
 ; ERRMSG: defines.txt:1:1: note: scanning from here
 ; ERRMSG: defines.txt:1:1: note: with variable "VALUE" equal to "20"
-; ERRMSG: defines.txt:8:1: note: possible intended match here
+; ERRMSG: defines.txt:[[#@LINE-7]]:1: note: possible intended match here
 
-; NOT-ERRMSG: defines.txt:10:12: error: {{NOT}}-NOT: excluded string found in input
-; NOT-ERRMSG: defines.txt:8:1: note: found here
-; NOT-ERRMSG: defines.txt:8:1: note: with variable "VALUE" equal to "10"
+; NOT-ERRMSG: defines.txt:[[#@LINE-7]]:12: error: {{NOT}}-NOT: excluded string found in input
+; NOT-ERRMSG: defines.txt:[[#VALLINE:@LINE-10]]:1: note: found here
+; NOT-ERRMSG: defines.txt:[[#VALLINE]]:1: note: with variable "VALUE" equal to "10"
 
 ; ERRCLI: Command-line definition 'VALUE10' missing equal sign
+
+; ERRCLIFMT: command line:1:3: error: Invalid name for variable definition '10VALUE'
+; ERRCLIFMT-NEXT: -D10VALUE=10
+; ERRCLIFMT-NEXT: {{^  \^$}}
+
+; ERRCLIPSEUDO: command line:1:3: error: Invalid name for variable definition '@VALUE'
+; ERRCLIPSEUDO-NEXT: -D@VALUE=10
+; ERRCLIPSEUDO-NEXT: {{^  \^$}}
+
+; ERRCLITRAIL: command line:1:3: error: Invalid name for variable definition 'VALUE + 2'
+; ERRCLITRAIL-NEXT: -DVALUE + 2=10
+; ERRCLITRAIL-NEXT: {{^  \^$}}
+
+Numeric value #2 = C
+; CHECKNUM: Numeric value #2 = [[#NUMVAL2]]
+; NUMNOT-NOT: Numeric value #2 = [[#NUMVAL2]]
+
+; NUMERRMSG: defines.txt:[[#@LINE-3]]:13: error: CHECKNUM: expected string not found in input
+; NUMERRMSG: defines.txt:1:1: note: scanning from here
+; NUMERRMSG: defines.txt:1:1: note: with numeric expression "NUMVAL2" equal to "E"
+; NUMERRMSG: defines.txt:[[#@LINE-7]]:1: note: possible intended match here
+
+; NOT-NUMERRMSG: defines.txt:[[#@LINE-7]]:15: error: {{NUMNOT}}-NOT: excluded string found in input
+; NOT-NUMERRMSG: defines.txt:[[#NUMVALLINE:@LINE-10]]:1: note: found here
+; NOT-NUMERRMSG: defines.txt:[[#NUMVALLINE]]:1: note: with numeric expression "NUMVAL2" equal to "C"
+
+; NUMERRCLI: command line:1:29: error: Invalid matching format specification in numeric expression
+; NUMERRCLI-NEXT: -D#,VALUE=10 (parsed as: {{\[\[#,VALUE:10\]\]}})
+; NUMERRCLI-NEXT: {{^                            \^$}}

test/FileCheck/numeric-expression.txt

+; RUN: FileCheck -input-file %s %s
+; RUN: not FileCheck -check-prefixes ERR,ERR1 -input-file %s %s 2>&1 | FileCheck -check-prefix ERRMSG1 %s
+; RUN: not FileCheck -check-prefixes ERR,ERR2 -input-file %s %s 2>&1 | FileCheck -check-prefix ERRMSG2 %s
+; RUN: not FileCheck -check-prefixes ERR,ERR3 -input-file %s %s 2>&1 | FileCheck -check-prefix ERRMSG3 %s
+; RUN: not FileCheck -check-prefixes ERR,ERR4 -input-file %s %s 2>&1 | FileCheck -check-prefix ERRMSG4 %s
+; RUN: not FileCheck -check-prefix ERR5 -input-file %s %s 2>&1 | FileCheck -check-prefix ERRMSG5 %s
+; RUN: not FileCheck -check-prefixes CHECK,ERR6 -input-file %s %s 2>&1 | FileCheck -check-prefix ERRMSG6 %s
+; RUN: not FileCheck -check-prefix ERR7 -input-file %s %s 2>&1 | FileCheck -check-prefix ERRMSG7 %s
+; RUN: not FileCheck -check-prefix ERR8 -input-file %s %s 2>&1 | FileCheck -check-prefix ERRMSG8 %s
+
+; We ensure we attemt to match all lines with digits by wrapping them between
+; START and END and using CHECK-NEXT to ensure each line is covered.
+
+
+; Numeric variable definition with default matching format
+DEF DEFAULT FMT
+11
+; CHECK-LABEL: DEF DEFAULT FMT
+; CHECK-NEXT: [[#VAR1:]]
+
+
+; Name conflict between Numeric variable definition and pattern variable definition
+PATVAR NUMVAR CONFLICT
+11
+foo1bar
+foo2bar
+22
+; ERR-LABEL: PATVAR NUMVAR CONFLICT
+; ERR1-NEXT: [[#PATVAR1:]]
+; ERR1-NEXT: [[PATVAR1:foo1.*]]
+; ERR2: [[PATVAR2:foo2.*]]
+; ERR2-NEXT: [[#PATVAR2:]]
+
+; ERRMSG1: numeric-expression.txt:[[#@LINE-4]]:16: error: Numeric variable with same name 'PATVAR1' exists
+; ERRMSG1-NEXT: ; {{E}}RR1-NEXT: {{\[\[PATVAR1:foo1\.\*\]\]}}
+; ERRMSG2: numeric-expression.txt:[[#@LINE-4]]:17: error: Pattern variable with same name 'PATVAR2' exists
+; ERRMSG2-NEXT: ; {{E}}RR2-NEXT: {{\[\[#PATVAR2:\]\]}}
+
+
+;; Numeric variable definition with default matching format in alternate spacing
+DEF DEFAULT FMT ALT SPC
+11
+11
+11
+; CHECK-LABEL: DEF DEFAULT FMT ALT SPC
+; CHECK-NEXT: [[# VAR1a:]]
+; CHECK-NEXT: [[# VAR1b :]]
+; CHECK-NEXT: [[# VAR1c : ]]
+
+; Numeric variable definition with explicit matching format
+DEF FMT
+-30
+c
+D
+; CHECK-LABEL: DEF FMT
+; CHECK-NEXT: [[#%d,VAR2:]]
+; CHECK-NEXT: [[#%x,VAR3:]]
+; CHECK-NEXT: [[#%X,VAR4:]]
+
+
+; Numeric variable definition with unsupported matching format
+DEF INVALID FMT
+INVVAR1=a
+INVVAR2=11
+; ERR-LABEL: DEF INVALID FMT
+; ERR3-NEXT: INVVAR1=[[#%c,INVVAR1:]]
+; ERR4-NEXT: INVVAR2=[[#%hhd,INVVAR2:]]
+; ERRMSG3: numeric-expression.txt:[[#@LINE-2]]:26: error: Invalid format specifier in numeric expression
+; ERRMSG3-NEXT: ; {{E}}RR3-NEXT: INVVAR1={{\[\[#%c,INVVAR1:\]\]}}
+; ERRMSG3-NEXT: {{^                         \^$}}
+; ERRMSG4: numeric-expression.txt:[[#@LINE-4]]:26: error: Invalid format specifier in numeric expression
+; ERRMSG4-NEXT: ; {{E}}RR4-NEXT: INVVAR2={{\[\[#%hhd,INVVAR2:\]\]}}
+; ERRMSG4-NEXT: {{^                         \^$}}
+
+
+; Numeric variable definition with explicit matching format in alternate spacing
+DEF FMT ALT SPC
+-30
+-30
+-30
+-30
+-30
+; CHECK-LABEL: DEF FMT ALT SPC
+; CHECK-NEXT: [[#%d, VAR2a:]]
+; CHECK-NEXT: [[# %d, VAR2b:]]
+; CHECK-NEXT: [[# %d , VAR2c:]]
+; CHECK-NEXT: [[# %d , VAR2d :]]
+; CHECK-NEXT: [[# %d , VAR2e : ]]
+
+; Numeric expressions in explicit matching format and default matching rule using
+; variables defined on other lines
+USE DEF FMT IMPL MATCH
+11
+12
+10
+-30
+-29
+-31
+c
+d
+b
+1a
+1a
+D
+E
+C
+1B
+1B
+; CHECK-LABEL: USE DEF FMT IMPL MATCH
+; CHECK-NEXT: [[#%u,VAR1]]
+; CHECK-NEXT: [[#%u,VAR1+1]]
+; CHECK-NEXT: [[#%u,VAR1-1]]
+; CHECK-NEXT: [[#%d,VAR2]]
+; CHECK-NEXT: [[#%d,VAR2+1]]
+; CHECK-NEXT: [[#%d,VAR2-1]]
+; CHECK-NEXT: [[#%x,VAR3]]
+; CHECK-NEXT: [[#%x,VAR3+1]]
+; CHECK-NEXT: [[#%x,VAR3-1]]
+; CHECK-NEXT: [[#%x,VAR3+0xe]]
+; CHECK-NEXT: [[#%x,VAR3+0xE]]
+; CHECK-NEXT: [[#%X,VAR4]]
+; CHECK-NEXT: [[#%X,VAR4+1]]
+; CHECK-NEXT: [[#%X,VAR4-1]]
+; CHECK-NEXT: [[#%X,VAR4+0xe]]
+; CHECK-NEXT: [[#%X,VAR4+0xE]]
+
+
+; Numeric expression using undefined variable
+UNDEF VAR USE
+UNDEFVAR: 11
+; ERR5-LABEL: UNDEF VAR USE
+; ERR5-NEXT: UNDEFVAR: [[#UNDEFVAR]]
+; ERRMSG5: numeric-expression.txt:[[#@LINE-1]]:27: error: Using undefined numeric variable 'UNDEFVAR'
+; ERRMSG5-NEXT: ; {{E}}RR5-NEXT: UNDEFVAR: {{\[\[#UNDEFVAR\]\]}}
+; ERRMSG5-NEXT: {{^                            \^$}}
+
+
+; Numeric expression with unsupported operator
+INVALID OPERATOR
+VAR1*2: 22
+; ERR6-LABEL: INVALID OPERATOR
+; ERR6-NEXT: VAR1*2: [[#VAR1*2]]
+; ERRMSG6: numeric-expression.txt:[[#@LINE-1]]:29: error: Unsupported numeric operation '*'
+; ERRMSG6-NEXT: ; {{E}}RR6-NEXT: VAR1*2: {{\[\[#VAR1\*2\]\]}}
+; ERRMSG6-NEXT: {{^                            \^$}}
+
+
+; Numeric expression with overflow
+OVERFLOW
+BIGVAR=10000000000000000
+; ERR7-LABEL: OVERFLOW
+; ERR7-NEXT: BIGVAR: [[#BIGVAR:0x8000000000000000+0x8000000000000000]]
+; ERRMSG7: numeric-expression.txt:[[#@LINE-1]]:25: error: Failed to evaluate numeric expression known at parse time
+; ERRMSG7-NEXT: {{E}}RR7-NEXT: BIGVAR: {{\[\[#BIGVAR:0x8000000000000000\+0x8000000000000000\]\]}}
+; ERRMSG7-NEXT: {{^                        \^$}}
+
+
+; Numeric expression with underflow
+UNDERFLOW
+TINYVAR=-10000000000000000
+; ERR8-LABEL: UNDERFLOW
+; ERR8-NEXT: TINYVAR: [[#%d,TINYVAR:-0x8000000000000000-0x8000000000000000]]
+; ERRMSG8: numeric-expression.txt:[[#@LINE-1]]:26: error: Failed to evaluate numeric expression known at parse time
+; ERRMSG8-NEXT: {{E}}RR8-NEXT: TINYVAR: {{\[\[#%d,TINYVAR:-0x8000000000000000-0x8000000000000000\]\]}}
+; ERRMSG8-NEXT: {{^                         \^$}}
+
+
+; Numeric expressions in explicit matching format and default matching rule using
+; variables defined on other lines in alternate spacing
+USE EXPL FMT IMPL MATCH ALT SPC
+11
+11
+11
+12
+12
+12
+12
+12
+12
+10
+10
+10
+10
+10
+10
+; CHECK-LABEL: USE EXPL FMT IMPL MATCH ALT SPC
+; CHECK-NEXT: [[#%u, VAR1]]
+; CHECK-NEXT: [[# %u, VAR1]]
+; CHECK-NEXT: [[# %u, VAR1 ]]
+; CHECK-NEXT: [[#%u, VAR1+1]]
+; CHECK-NEXT: [[# %u, VAR1+1]]
+; CHECK-NEXT: [[# %u , VAR1+1]]
+; CHECK-NEXT: [[# %u , VAR1 +1]]
+; CHECK-NEXT: [[# %u , VAR1 + 1]]
+; CHECK-NEXT: [[# %u , VAR1 + 1 ]]
+; CHECK-NEXT: [[#%u, VAR1-1]]
+; CHECK-NEXT: [[# %u, VAR1-1]]
+; CHECK-NEXT: [[# %u , VAR1-1]]
+; CHECK-NEXT: [[# %u , VAR1 -1]]
+; CHECK-NEXT: [[# %u , VAR1 - 1]]
+; CHECK-NEXT: [[# %u , VAR1 - 1 ]]
+
+
+; Numeric expressions in implicit matching format and default matching rule using
+; variables defined on other lines
+USE IMPL FMT IMPL MATCH
+11
+12
+10
+-30
+-29
+-31
+c
+d
+b
+1a
+1a
+D
+E
+C
+1B
+1B
+; CHECK-LABEL: USE IMPL FMT IMPL MATCH
+; CHECK-NEXT: [[#VAR1]]
+; CHECK-NEXT: [[#VAR1+1]]
+; CHECK-NEXT: [[#VAR1-1]]
+; CHECK-NEXT: [[#VAR2]]
+; CHECK-NEXT: [[#VAR2+1]]
+; CHECK-NEXT: [[#VAR2-1]]
+; CHECK-NEXT: [[#VAR3]]
+; CHECK-NEXT: [[#VAR3+1]]
+; CHECK-NEXT: [[#VAR3-1]]
+; CHECK-NEXT: [[#VAR3+0xe]]
+; CHECK-NEXT: [[#VAR3+0xE]]
+; CHECK-NEXT: [[#VAR4]]
+; CHECK-NEXT: [[#VAR4+1]]
+; CHECK-NEXT: [[#VAR4-1]]
+; CHECK-NEXT: [[#VAR4+0xe]]
+; CHECK-NEXT: [[#VAR4+0xE]]
+
+
+; Numeric expressions in default matching format and default matching rule
+; using variables defined on other lines and an immediate interpreted as an
+; unsigned value
+; Note: 9223372036854775819 = 0x8000000000000000 + 11
+USE IMPL FMT IMPL MATCH UNSIGNED IMM
+9223372036854775819
+; CHECK-LABEL: USE IMPL FMT IMPL MATCH UNSIGNED IMM
+; CHECK-NEXT: [[#VAR1+0x8000000000000000]]
+
+
+; Numeric expressions in default matching format and explicit matching rule using
+; variables defined on other lines
+USE DEF FMT EXPL MATCH
+11
+11
+11
+; CHECK-LABEL: USE DEF FMT EXPL MATCH
+; CHECK-NEXT: [[#==VAR1]]
+; CHECK-NEXT: [[# ==VAR1]]
+; CHECK-NEXT: [[# == VAR1]]
+
+
+; Numeric expressions with conversion matching format and implicit matching rule
+; using variables defined on other lines
+USE CONV FMT IMPL MATCH
+b
+B
+12
+12
+13
+13
+; CHECK-LABEL: USE CONV FMT IMPL MATCH
+; CHECK-NEXT: [[# %x, VAR1]]
+; CHECK-NEXT: [[# %X, VAR1]]
+; CHECK-NEXT: [[# %u, VAR3]]
+; CHECK-NEXT: [[# %d, VAR3]]
+; CHECK-NEXT: [[# %u, VAR4]]
+; CHECK-NEXT: [[# %d, VAR4]]
+
+
+; Numeric expression with explicit and default matching format and implicit
+; matching rule using variables defined on same line
+USE SAME EXPL FMT IMPL MATCH
+11 10
+-11 C
+b c
+b 12 c
+C B
+B 10
+; CHECK-LABEL: USE SAME EXPL FMT IMPL MATCH
+; CHECK-NEXT: [[#VAR5:]] [[#%u,VAR5-1]]
+; CHECK-NEXT: [[#%d,VAR6:]] [[#%X,VAR6+23]]
+; CHECK-NEXT: [[#%x,VAR7:]] [[#%x,VAR7+1]]
+; CHECK-NEXT: [[#%x,VAR8:]] [[#%u,VAR8+1]] [[#%x,VAR8+1]]
+; CHECK-NEXT: [[#%X,VAR9:]] [[#%X,VAR9-1]]
+; CHECK-NEXT: [[#%X,VAR10:]] [[#%d,VAR10-1]]
+
+
+; Numeric expression with implicit matching format and implicit matching rule
+; using variables defined on same line
+USE SAME IMPL FMT IMPL MATCH
+11 10
+-11 -4
+b c
+b 12 c
+C B
+; CHECK-LABEL: USE SAME IMPL FMT IMPL MATCH
+; CHECK-NEXT: [[#VAR5:]] [[#VAR5-1]]
+; CHECK-NEXT: [[#%d,VAR6:]] [[#VAR6+7]]
+; CHECK-NEXT: [[#%x,VAR7:]] [[#VAR7+1]]
+; CHECK-NEXT: [[#%x,VAR8:]] [[#%u,VAR8+1]] [[#VAR8+1]]
+; CHECK-NEXT: [[#%X,VAR9:]] [[#VAR9-1]]
+
+
+; Numeric expression with implicit matching format and implicit matching rule
+; using variables defined on same line satisfying constraint is not the first
+; line encountered.
+REDEF SAME IMPL FMT IMPL MATCH NOT FIRST
+1 3
+1 2
+; CHECK-LABEL: REDEF SAME IMPL FMT IMPL MATCH NOT FIRST
+; CHECK: [[#N:]] [[#N+1]]
+
+
+; Numeric expression with explicit matching format and implicit matching rule
+; using variables redefined on same line
+REDEF EXPL FMT IMPL MATCH
+21
+22 -31 -32
+AC/DC dc db
+; CHECK-LABEL: REDEF EXPL FMT IMPL MATCH
+; CHECK-NEXT: [[#VAR11:]]
+; CHECK-NEXT: [[#%u,VAR11+1]] [[#%d,VAR11:]] [[#%d,VAR11-1]]
+; CHECK-NEXT: [[#%X,VAR12:]]/[[#%X,VAR12+48]] [[#%x,VAR12:]] [[#%x,VAR12-1]]
+
+; Numeric expression with implicit matching format and implicit matching rule
+; using variables redefined on same line
+REDEF IMPL FMT IMPL MATCH
+21
+22 -31 -32
+AC/DC dc db
+; CHECK-LABEL: REDEF IMPL FMT IMPL MATCH
+; CHECK-NEXT: [[#VAR11:]]
+; CHECK-NEXT: [[#VAR11+1]] [[#%d,VAR11:]] [[#VAR11-1]]
+; CHECK-NEXT: [[#%X,VAR12:]]/[[#VAR12+0x30]] [[#%x,VAR12:]] [[#VAR12-1]]

test/FileCheck/regex-scope.txt

-// RUN: FileCheck -input-file %s %s
-// RUN: FileCheck -check-prefixes CHECK,GLOBAL -input-file %s %s
-// RUN: FileCheck -check-prefixes CHECK,LOCAL -input-file %s %s
-// RUN: FileCheck -check-prefixes CHECK,GLOBAL --enable-var-scope -input-file %s %s
-// RUN: not FileCheck -check-prefixes CHECK,LOCAL --enable-var-scope -input-file %s %s
-
-local
-global
-; CHECK: [[LOCAL:loc.*]]
-; CHECK: [[$GLOBAL:glo.*]]
-
-local2
-global2
-; CHECK: [[LOCAL]]2
-; CHECK: [[$GLOBAL]]2
-
-barrier:
-; CHECK-LABEL: barrier
-
-local3
-global3
-; LOCAL: [[LOCAL]]3
-; GLOBAL: [[$GLOBAL]]3

test/FileCheck/var-scope.txt

+// RUN: FileCheck -input-file %s %s
+// RUN: FileCheck -check-prefixes CHECK,GLOBAL -input-file %s %s
+// RUN: FileCheck -check-prefixes CHECK,LOCAL,LOCAL3 -input-file %s %s
+// RUN: FileCheck -check-prefixes CHECK,GLOBAL --enable-var-scope -input-file %s %s
+// RUN: not FileCheck -check-prefixes CHECK,LOCAL,LOCAL1 --enable-var-scope -input-file %s %s
+// RUN: not FileCheck -check-prefixes CHECK,LOCAL,LOCAL2 --enable-var-scope -input-file %s %s
+
+local1
+global1
+; CHECK: [[LOCAL:loc[^[:digit:]]*]][[#LOCNUM:]]
+; CHECK: [[$GLOBAL:glo[^[:digit:]]*]][[#GLOBNUM:]]
+
+local2
+global2
+; CHECK: [[LOCAL]][[#LOCNUM+1]]
+; CHECK: [[$GLOBAL]][[#GLOBNUM+1]]
+
+barrier:
+; CHECK-LABEL: barrier
+
+local3
+global3
+; LOCAL1: [[LOCAL]]3
+; LOCAL2: local[[#LOCNUM+2]]
+; LOCAL2: [[LOCAL]][[#LOCNUM+2]]
+; GLOBAL: [[$GLOBAL]][[#GLOBNUM+2]]

test/FileCheck/verbose.txt

 
 VV-NEXT: verbose.txt:[[@LINE-17]]:12: remark: {{C}}HECK-NOT: excluded string not found in input
 VV-NEXT: {{C}}HECK-NOT: raboof{{$}}
 VV-NEXT:  {{^           \^$}}
 VV-NEXT: verbose.txt:[[@LINE-22]]:1: note: scanning from here
 VV-NEXT: {{^}}bar{{$}}
 VV-NEXT: {{^}}^{{$}}
 
+VAR1=42
+VAR1:42 VAR1=12 VAR1:12
+CHECK: VAR1=[[#VAR1:]]
+CHECK-NOT: [[#VAR1 + 1]]
+CHECK-NEXT: VAR1:[[#VAR1]] VAR1=[[#VAR1:]] VAR1:[[#VAR1]]
+
+V:      verbose.txt:[[#@LINE-4]]:8: remark: {{C}}HECK: expected string found in input
+V-NEXT: {{C}}HECK: {{VAR1=[[][[]#VAR1:[]][]]$}}
+V-NEXT:  {{^       \^$}}
+V-NEXT: verbose.txt:[[#@LINE-9]]:1: note: found here
+V-NEXT: {{^}}VAR1=42{{$}}
+V-NEXT: {{^}}^~~~~~~{{$}}
+
+V-NEXT: verbose.txt:[[#@LINE-9]]:13: remark: {{C}}HECK-NEXT: expected string found in input
+V-NEXT: {{C}}HECK-NEXT: {{VAR1:[[][[]#VAR1[]][]] VAR1=[[][[]#VAR1:[]][]] VAR1:[[][[]#VAR1[]][]]$}}
+V-NEXT:  {{^            \^$}}
+V-NEXT: verbose.txt:[[#VARLIN1:@LINE-15]]:1: note: found here
+V-NEXT: {{^}}VAR1:42 VAR1=12 VAR1:12{{$}}
+V-NEXT: {{^}}^~~~~~~~~~~~~~~~~~~~~~~{{$}}
+VV-NEXT: verbose.txt:[[#VARLIN1]]:1: note: with numeric expression "VAR1" equal to "42"
+VV-NEXT: {{^}}VAR1:42 VAR1=12 VAR1:12{{$}}
+VV-NEXT: {{^}}^~~~~~~~~~~~~~~~~~~~~~~{{$}}
+VV-NEXT: verbose.txt:[[#VARLIN1]]:1: note: with numeric expression "VAR1" equal to "12"
+VV-NEXT: {{^}}VAR1:42 VAR1=12 VAR1:12{{$}}
+VV-NEXT: {{^}}^~~~~~~~~~~~~~~~~~~~~~~{{$}}
+
+VV-NEXT: verbose.txt:[[#@LINE-23]]:12: remark: {{C}}HECK-NOT: excluded string not found in input
+VV-NEXT: {{C}}HECK-NOT: {{[[][[]#VAR1 [+] 1[]][]]$}}
+VV-NEXT:  {{^           \^$}}
+VV-NEXT: verbose.txt:[[#@LINE-28]]:1: note: scanning from here
+VV-NEXT: {{^}}VAR1:42 VAR1=12 VAR1:12{{$}}
+VV-NEXT: {{^}}^{{$}}
+
 before empty
 
 after empty
 CHECK: before empty
 CHECK-EMPTY:
 CHECK-NEXT: after empty
 
 V:      verbose.txt:[[@LINE-4]]:8: remark: {{C}}HECK: expected string found in input