[VPlan] Move reduction start value creation to widenPHIRecipe.

[fhahn]

Summary

This was suggested to prepare for D93975.

By moving the start value creation to widenPHInstruction, we set the
stage to manage the start value directly in VPWidenPHIRecipe, which be
used subsequently to set the 'resume' value for reductions during
epilogue vectorization.

It also moves RdxDesc to the recipe, so we do not have to rely on Legal
to look it up later.

[fhahn]

Simplified StartV = Iden = StartV; to Iden = StartV, as suggested in D93975

[gilr]

LGTM, with a nit.
(Seems reduction might be worth splitting widenPhiInstruction() and its own Recipe, but that's beyond the scope of this patch)
Thanks!

llvm/lib/Transforms/Vectorize/LoopVectorize.cpp

4587

To be on the safe side I'd check here for Legal->isReductionVariable(P) and assert that RdxDesc and StartV are not null inside.

[fhahn]

In D94175#2487083, @gilr wrote:

LGTM, with a nit.
(Seems reduction might be worth splitting widenPhiInstruction() and its own Recipe, but that's beyond the scope of this patch)
Thanks!

Thanks Gil! Yes I think we can think about splitting them up as follow-ups.

llvm/lib/Transforms/Vectorize/LoopVectorize.cpp

4587

I added an assertion that Legal->isReductionVariable(P) and StartV must be true. I also added another assertion below to ensure we do not miss legal induction variables for which RdxDesc is not set.

llvm/lib/Transforms/Vectorize/LoopVectorize.cpp

public:
   /// decisions taken during planning.
   void widenGEP(GetElementPtrInst *GEP, VPValue *VPDef, VPUser &Indices,
                 unsigned UF, ElementCount VF, bool IsPtrLoopInvariant,
                 SmallBitVector &IsIndexLoopInvariant, VPTransformState &State);
 
   /// Vectorize a single PHINode in a block. This method handles the induction
   /// variable canonicalization. It supports both VF = 1 for unrolled loops and
   /// arbitrary length vectors.
-  void widenPHIInstruction(Instruction *PN, unsigned UF, ElementCount VF);
+  void widenPHIInstruction(Instruction *PN, RecurrenceDescriptor *RdxDesc,
+                           Value *StartV, unsigned UF, ElementCount VF);
 
   /// A helper function to scalarize a single Instruction in the innermost loop.
   /// Generates a sequence of scalar instances for each lane between \p MinLane
   /// and \p MaxLane, times each part between \p MinPart and \p MaxPart,
   /// inclusive. Uses the VPValue operands from \p Operands instead of \p
   /// Instr's operands.
   void scalarizeInstruction(Instruction *Instr, VPUser &Operands,
                             const VPIteration &Instance, bool IfPredicateInstr,
void InnerLoopVectorizer::fixFirstOrderRecurrence(PHINode *Phi) {
   for (PHINode &LCSSAPhi : LoopExitBlock->phis()) {
     if (LCSSAPhi.getIncomingValue(0) == Phi) {
       LCSSAPhi.addIncoming(ExtractForPhiUsedOutsideLoop, LoopMiddleBlock);
     }
   }
 }
 
 void InnerLoopVectorizer::fixReduction(PHINode *Phi) {
-  Constant *Zero = Builder.getInt32(0);
-
   // Get it's reduction variable descriptor.
   assert(Legal->isReductionVariable(Phi) &&
          "Unable to find the reduction variable");
   RecurrenceDescriptor RdxDesc = Legal->getReductionVars()[Phi];
 
   RecurKind RK = RdxDesc.getRecurrenceKind();
   TrackingVH<Value> ReductionStartValue = RdxDesc.getRecurrenceStartValue();
   Instruction *LoopExitInst = RdxDesc.getLoopExitInstr();
   setDebugLocFromInst(Builder, ReductionStartValue);
   bool IsInLoopReductionPhi = Cost->isInLoopReduction(Phi);
 
-  // We need to generate a reduction vector from the incoming scalar.
-  // To do so, we need to generate the 'identity' vector and override
-  // one of the elements with the incoming scalar reduction. We need
-  // to do it in the vector-loop preheader.
-  Builder.SetInsertPoint(LoopVectorPreHeader->getTerminator());
-
   // This is the vector-clone of the value that leaves the loop.
   Type *VecTy = getOrCreateVectorValue(LoopExitInst, 0)->getType();
 
-  // Find the reduction identity variable. Zero for addition, or, xor,
-  // one for multiplication, -1 for And.
-  Value *Identity;
-  Value *VectorStart;
-  if (RecurrenceDescriptor::isMinMaxRecurrenceKind(RK)) {
-    // MinMax reduction have the start value as their identify.
-    if (VF.isScalar() || IsInLoopReductionPhi) {
-      VectorStart = Identity = ReductionStartValue;
-    } else {
-      VectorStart = Identity =
-        Builder.CreateVectorSplat(VF, ReductionStartValue, "minmax.ident");
-    }
-  } else {
-    // Handle other reduction kinds:
-    Constant *Iden = RecurrenceDescriptor::getRecurrenceIdentity(
-        RK, VecTy->getScalarType());
-    if (VF.isScalar() || IsInLoopReductionPhi) {
-      Identity = Iden;
-      // This vector is the Identity vector where the first element is the
-      // incoming scalar reduction.
-      VectorStart = ReductionStartValue;
-    } else {
-      Identity = ConstantVector::getSplat(VF, Iden);
-
-      // This vector is the Identity vector where the first element is the
-      // incoming scalar reduction.
-      VectorStart =
-        Builder.CreateInsertElement(Identity, ReductionStartValue, Zero);
-    }
-  }
-
   // Wrap flags are in general invalid after vectorization, clear them.
   clearReductionWrapFlags(RdxDesc);
 
   // Fix the vector-loop phi.
 
   // Reductions do not have to start at zero. They can start with
   // any loop invariant values.
   BasicBlock *Latch = OrigLoop->getLoopLatch();
   Value *LoopVal = Phi->getIncomingValueForBlock(Latch);
 
   for (unsigned Part = 0; Part < UF; ++Part) {
     Value *VecRdxPhi = getOrCreateVectorValue(Phi, Part);
     Value *Val = getOrCreateVectorValue(LoopVal, Part);
-    // Make sure to add the reduction start value only to the
-    // first unroll part.
-    Value *StartVal = (Part == 0) ? VectorStart : Identity;
-    cast<PHINode>(VecRdxPhi)->addIncoming(StartVal, LoopVectorPreHeader);
     cast<PHINode>(VecRdxPhi)
       ->addIncoming(Val, LI->getLoopFor(LoopVectorBody)->getLoopLatch());
   }
 
   // Before each round, move the insertion point right between
   // the PHIs and the values we are going to write.
   // This allows us to write both PHINodes and the extractelement
   // instructions.
for (unsigned Part = 0; Part < UF; ++Part) {
       assert((VF.isScalar() || NewGEP->getType()->isVectorTy()) &&
              "NewGEP is not a pointer vector");
       State.set(VPDef, GEP, NewGEP, Part);
       addMetadata(NewGEP, GEP);
     }
   }
 }
 
-void InnerLoopVectorizer::widenPHIInstruction(Instruction *PN, unsigned UF,
+void InnerLoopVectorizer::widenPHIInstruction(Instruction *PN,
+                                              RecurrenceDescriptor *RdxDesc,
+                                              Value *StartV, unsigned UF,
                                               ElementCount VF) {
   assert(!VF.isScalable() && "scalable vectors not yet supported.");
   PHINode *P = cast<PHINode>(PN);
   if (EnableVPlanNativePath) {
     // Currently we enter here in the VPlan-native path for non-induction
     // PHIs where all control flow is uniform. We simply widen these PHIs.
     // Create a vector phi with no operands - the vector phi operands will be
     // set at the end of vector code generation.
void InnerLoopVectorizer::widenPHIInstruction(Instruction *PN,
   assert(PN->getParent() == OrigLoop->getHeader() &&
          "Non-header phis should have been handled elsewhere");
 
   // In order to support recurrences we need to be able to vectorize Phi nodes.
   // Phi nodes have cycles, so we need to vectorize them in two stages. This is
   // stage #1: We create a new vector PHI node with no incoming edges. We'll use
   // this value when we vectorize all of the instructions that use the PHI.
   if (Legal->isReductionVariable(P) || Legal->isFirstOrderRecurrence(P)) {
-    for (unsigned Part = 0; Part < UF; ++Part) {
-      // This is phase one of vectorizing PHIs.
-      bool ScalarPHI =
-          (VF.isScalar()) || Cost->isInLoopReduction(cast<PHINode>(PN));
-      Type *VecTy =
-          ScalarPHI ? PN->getType() : VectorType::get(PN->getType(), VF);
+    Value *Iden = nullptr;
+
+    if (RdxDesc) {
+      RecurKind RK = RdxDesc->getRecurrenceKind();
+      if (RecurrenceDescriptor::isMinMaxRecurrenceKind(RK)) {
+        // MinMax reduction have the start value as their identify.
+        if (ScalarPHI) {
+          Iden = StartV;
+        } else {
+          IRBuilderBase::InsertPointGuard IPBuilder(Builder);
+          Builder.SetInsertPoint(LoopVectorPreHeader->getTerminator());
+          StartV = Iden = Builder.CreateVectorSplat(VF, StartV, "minmax.ident");
+        }
+      } else {
+        Constant *IdenC = RecurrenceDescriptor::getRecurrenceIdentity(
+            RK, VecTy->getScalarType());
+        Iden = IdenC;
+
+        if (!ScalarPHI) {
+          Iden = ConstantVector::getSplat(VF, IdenC);
+          IRBuilderBase::InsertPointGuard IPBuilder(Builder);
+          Builder.SetInsertPoint(LoopVectorPreHeader->getTerminator());
+          Constant *Zero = Builder.getInt32(0);
+          StartV = Builder.CreateInsertElement(Iden, StartV, Zero);
+        }
+      }
+    }
+
+    for (unsigned Part = 0; Part < UF; ++Part) {
+      // This is phase one of vectorizing PHIs.
       Value *EntryPart = PHINode::Create(
           VecTy, 2, "vec.phi", &*LoopVectorBody->getFirstInsertionPt());
       VectorLoopValueMap.setVectorValue(P, Part, EntryPart);
+      if (StartV) {
+        // Make sure to add the reduction start value only to the
+        // first unroll part.
+        Value *StartVal = (Part == 0) ? StartV : Iden;
+        cast<PHINode>(EntryPart)->addIncoming(StartVal, LoopVectorPreHeader);
+      }
     }
     return;
   }
 
   setDebugLocFromInst(Builder, P);
 
   // This PHINode must be an induction variable.
   // Make sure that we know about it.
if (isa<LoadInst>(Instr) || isa<StoreInst>(Instr))
     return tryToWidenMemory(Instr, Range, Plan);
 
   VPRecipeBase *Recipe;
   if (auto Phi = dyn_cast<PHINode>(Instr)) {
     if (Phi->getParent() != OrigLoop->getHeader())
       return tryToBlend(Phi, Plan);
     if ((Recipe = tryToOptimizeInductionPHI(Phi, *Plan)))
       return Recipe;
+
+    if (Legal->isReductionVariable(Phi)) {
+      RecurrenceDescriptor &RdxDesc = Legal->getReductionVars()[Phi];
+      return new VPWidenPHIRecipe(Phi, RdxDesc);
+    }
+
     return new VPWidenPHIRecipe(Phi);
   }
 
   if (isa<TruncInst>(Instr) && (Recipe = tryToOptimizeInductionTruncate(
                                     cast<TruncInst>(Instr), Range, *Plan)))
     return Recipe;
 
   if (!shouldWiden(Instr, Range))

 
 void VPWidenIntOrFpInductionRecipe::execute(VPTransformState &State) {
   assert(!State.Instance && "Int or FP induction being replicated.");
   State.ILV->widenIntOrFpInduction(IV, getStartValue()->getLiveInIRValue(),
                                    Trunc);
 }
 
 void VPWidenPHIRecipe::execute(VPTransformState &State) {
-  State.ILV->widenPHIInstruction(Phi, State.UF, State.VF);
+  Value *StartV = nullptr;
+  if (RdxDesc)
+    StartV = RdxDesc->getRecurrenceStartValue();
+  State.ILV->widenPHIInstruction(Phi, RdxDesc, StartV, State.UF, State.VF);
 }
 
 void VPBlendRecipe::execute(VPTransformState &State) {
   State.ILV->setDebugLocFromInst(State.Builder, Phi);
   // We know that all PHIs in non-header blocks are converted into
   // selects, so we don't have to worry about the insertion order and we
   // can just use the builder.
   // At this point we generate the predication tree. There may be

llvm/lib/Transforms/Vectorize/VPlan.h

public:
   void print(raw_ostream &O, const Twine &Indent,
              VPSlotTracker &SlotTracker) const override;
 
   /// Returns the start value of the induction.
   VPValue *getStartValue() { return getOperand(0); }
 };
 
 /// A recipe for handling all phi nodes except for integer and FP inductions.
+/// For reduction PHIs, RdxDesc needs to be non-null
 class VPWidenPHIRecipe : public VPRecipeBase {
   PHINode *Phi;
 
+  /// Descriptor for a reduction PHI.
+  RecurrenceDescriptor *RdxDesc = nullptr;
+
 public:
+  /// Create a new VPWidenPHIRecipe for the reduction \p Phi described by \p
+  /// RdxDesc.
+  VPWidenPHIRecipe(PHINode *Phi, RecurrenceDescriptor &RdxDesc)
+      : VPWidenPHIRecipe(Phi) {
+    this->RdxDesc = &RdxDesc;
+  }
+
+  /// Create a VPWidenPHIRecipe for \p Phi
   VPWidenPHIRecipe(PHINode *Phi) : VPRecipeBase(VPWidenPHISC), Phi(Phi) {
     new VPValue(Phi, this);
   }
   ~VPWidenPHIRecipe() override = default;
 
   /// Method to support type inquiry through isa, cast, and dyn_cast.
   static inline bool classof(const VPDef *D) {
     return D->getVPDefID() == VPRecipeBase::VPWidenPHISC;