[Intrinsic] Add llvm.minimum and llvm.maximum instrinsic functions

[tlively]

Summary

These new intrinsics have the semantics of the minimum and maximum
operations specified by the latest draft of IEEE 754-2018. Unlike
llvm.minnum and llvm.maxnum, these new intrinsics propagate NaNs and
always treat -0.0 as less than 0.0. minimum and maximum lower
directly to the existing fminnan and fmaxnan ISel DAG nodes. It is
safe to reuse these DAG nodes because before this patch were only
emitted in situations where there were known to be no NaN arguments or
where NaN propagation was correct and there were known to be no zero
arguments. I know of only four backends that lower fminnan and
fmaxnan: WebAssembly, ARM, AArch64, and SystemZ, and each of these
lowers fminnan and fmaxnan to instructions that are compatible with
the IEEE 754-2018 semantics.

[javed.absar]

docs/LangRef.rst

11638

Does this need a para on sNaN and qNaN behaviour (as above for llvm.max) ?

[uweigand]

I agree that this seems fine for SystemZ.

[tlively]

docs/LangRef.rst

11638

I don't think so. llvm.maxnum and llvm.minnum need that paragraph because backends may have the unusual responsibility to quiet input NaNs for those operations in order to match the intrinsic semantics. That is because the minNum and maxNum in IEEE 754-2008 are exceptional in their handling of sNaNs and qNaNs. In contrast, these new intrinsics have the standard NaN propagation behavior for both sNaNs and qNaNs. Backends shouldn't need to take any additional action to canonicalize NaNs to get the right results.

[arsenm]

lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp

5588

Either as a dependency or an after-step, I think the DAG nodes should be renamed to match the intrinsic

[tlively]

lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp

5588

I'd be happy to do this in a follow-on. This makes sense to me because the names minnan and maxnan imply that the only difference from minnum and maxnum is NaN propagation, which is not correct.

[aheejin]

Bit of formatting nits

docs/LangRef.rst

11564

One more ^ at the end

11602

One more ^ at the end

11613

• double whitespaces between float and %Val1
• stray l after %Val1

11615

double whitespaces between x86_fp80 and %Val0 / x86_fp80 and %Val1

11617

double whitespaces between ppc_fp128 and %Val0 / ppc_fp128 and %Val1

[tlively]

• Formatting

[tlively]

• Rebase

docs/LangRef.rst

 
 Unlike the IEEE-754 2008 behavior, this does not distinguish between
 signaling and quiet NaN inputs. If a target's implementation follows
 the standard and returns a quiet NaN if either input is a signaling
 NaN, the intrinsic lowering is responsible for quieting the inputs to
 correctly return the non-NaN input (e.g. by using the equivalent of
 ``llvm.canonicalize``).
 
+'``llvm.minimum.*``' Intrinsic
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+
+This is an overloaded intrinsic. You can use ``llvm.minimum`` on any
+floating-point or vector of floating-point type. Not all targets support
+all types however.
+
+::
+
+      declare float     @llvm.minimum.f32(float %Val0, float %Val1)
+      declare double    @llvm.minimum.f64(double %Val0, double %Val1)
+      declare x86_fp80  @llvm.minimum.f80(x86_fp80 %Val0, x86_fp80 %Val1)
+      declare fp128     @llvm.minimum.f128(fp128 %Val0, fp128 %Val1)
+      declare ppc_fp128 @llvm.minimum.ppcf128(ppc_fp128 %Val0, ppc_fp128 %Val1)
+
+Overview:
+"""""""""
+
+The '``llvm.minimum.*``' intrinsics return the minimum of the two
+arguments, propagating NaNs and treating -0.0 as less than +0.0.
+
+
+Arguments:
+""""""""""
+
+The arguments and return value are floating-point numbers of the same
+type.
+
+Semantics:
+""""""""""
+If either operand is a NaN, returns NaN. Otherwise returns the lesser
+of the two arguments. -0.0 is considered to be less than +0.0 for this
+intrinsic. Note that these are the semantics specified in the draft of
+IEEE 754-2018.
+
+'``llvm.maximum.*``' Intrinsic
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Syntax:
+"""""""
+
+This is an overloaded intrinsic. You can use ``llvm.maximum`` on any
+floating-point or vector of floating-point type. Not all targets support
+all types however.
+
+::
+
+      declare float     @llvm.maximum.f32(float %Val0, float %Val1)
+      declare double    @llvm.maximum.f64(double %Val0, double %Val1)
+      declare x86_fp80  @llvm.maximum.f80(x86_fp80 %Val0, x86_fp80 %Val1)
+      declare fp128     @llvm.maximum.f128(fp128 %Val0, fp128 %Val1)
+      declare ppc_fp128 @llvm.maximum.ppcf128(ppc_fp128 %Val0, ppc_fp128 %Val1)
+
+Overview:
+"""""""""
+
+The '``llvm.maximum.*``' intrinsics return the maximum of the two
+arguments, propagating NaNs and treating -0.0 as less than +0.0.
+
+
+Arguments:
+""""""""""
+
+The arguments and return value are floating-point numbers of the same
+type.
+
+Semantics:
+""""""""""
+If either operand is a NaN, returns NaN. Otherwise returns the greater
+of the two arguments. -0.0 is considered to be less than +0.0 for this
+intrinsic. Note that these are the semantics specified in the draft of
+IEEE 754-2018.
+
 '``llvm.copysign.*``' Intrinsic
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 Syntax:
 """""""
 
 This is an overloaded intrinsic. You can use ``llvm.copysign`` on any
 floating-point or vector of floating-point type. Not all targets support

include/llvm/ADT/APFloat.h

 inline APFloat maxnum(const APFloat &A, const APFloat &B) {
   if (A.isNaN())
     return B;
   if (B.isNaN())
     return A;
   return (A.compare(B) == APFloat::cmpLessThan) ? B : A;
 }
 
+/// Implements IEEE 754-2018 minimum semantics. Returns the smaller of 2
+/// arguments, propagating NaNs and treating -0 as less than +0.
+LLVM_READONLY
+inline APFloat minimum(const APFloat &A, const APFloat &B) {
+  if (A.isNaN())
+    return A;
+  if (B.isNaN())
+    return B;
+  if (A.isZero() && B.isZero() && (A.isNegative() != B.isNegative()))
+    return A.isNegative() ? A : B;
+  return (B.compare(A) == APFloat::cmpLessThan) ? B : A;
+}
+
+/// Implements IEEE 754-2018 maximum semantics. Returns the larger of 2
+/// arguments, propagating NaNs and treating -0 as less than +0.
+LLVM_READONLY
+inline APFloat maximum(const APFloat &A, const APFloat &B) {
+  if (A.isNaN())
+    return A;
+  if (B.isNaN())
+    return B;
+  if (A.isZero() && B.isZero() && (A.isNegative() != B.isNegative()))
+    return A.isNegative() ? B : A;
+  return (A.compare(B) == APFloat::cmpLessThan) ? B : A;
+}
+
 } // namespace llvm
 
 #undef APFLOAT_DISPATCH_ON_SEMANTICS
 #endif // LLVM_ADT_APFLOAT_H

include/llvm/CodeGen/ISDOpcodes.h

enum NodeType {
     FLOG, FLOG2, FLOG10, FEXP, FEXP2,
     FCEIL, FTRUNC, FRINT, FNEARBYINT, FROUND, FFLOOR,
     /// FMINNUM/FMAXNUM - Perform floating-point minimum or maximum on two
     /// values.
     /// In the case where a single input is NaN, the non-NaN input is returned.
     ///
     /// The return value of (FMINNUM 0.0, -0.0) could be either 0.0 or -0.0.
     FMINNUM, FMAXNUM,
-    /// FMINNAN/FMAXNAN - Behave identically to FMINNUM/FMAXNUM, except that
-    /// when a single input is NaN, NaN is returned.
+    /// FMINNAN/FMAXNAN - NaN-propagating minimum/maximum that also treat -0.0
+    /// as less than 0.0. While FMINNUM/FMAXNUM follow IEEE 754-2008 semantics,
+    /// FMINNAN/FMAXNAN follow IEEE 754-2018 draft semantics.
     FMINNAN, FMAXNAN,
 
     /// FSINCOS - Compute both fsin and fcos as a single operation.
     FSINCOS,
 
     /// LOAD and STORE have token chains as their first operand, then the same
     /// operands as an LLVM load/store instruction, then an offset node that
     /// is added / subtracted from the base pointer to form the address (for

include/llvm/IR/IRBuilder.h

CallInst *CreateMinNum(Value *LHS, Value *RHS, const Twine &Name = "") {
     return CreateBinaryIntrinsic(Intrinsic::minnum, LHS, RHS, nullptr, Name);
   }
 
   /// Create call to the maxnum intrinsic.
   CallInst *CreateMaxNum(Value *LHS, Value *RHS, const Twine &Name = "") {
     return CreateBinaryIntrinsic(Intrinsic::maxnum, LHS, RHS, nullptr, Name);
   }
 
+  /// Create call to the minimum intrinsic.
+  CallInst *CreateMinimum(Value *LHS, Value *RHS, const Twine &Name = "") {
+    return CreateBinaryIntrinsic(Intrinsic::minimum, LHS, RHS, nullptr, Name);
+  }
+
+  /// Create call to the maximum intrinsic.
+  CallInst *CreateMaximum(Value *LHS, Value *RHS, const Twine &Name = "") {
+    return CreateBinaryIntrinsic(Intrinsic::maximum, LHS, RHS, nullptr, Name);
+  }
+
 private:
   /// Create a call to a masked intrinsic with given Id.
   CallInst *CreateMaskedIntrinsic(Intrinsic::ID Id, ArrayRef<Value *> Ops,
                                   ArrayRef<Type *> OverloadedTypes,
                                   const Twine &Name = "");
 
   Value *getCastedInt8PtrValue(Value *Ptr);
 };

include/llvm/IR/Intrinsics.td

 def int_minnum : Intrinsic<[llvm_anyfloat_ty],
   [LLVMMatchType<0>, LLVMMatchType<0>],
   [IntrNoMem, IntrSpeculatable, Commutative]
 >;
 def int_maxnum : Intrinsic<[llvm_anyfloat_ty],
   [LLVMMatchType<0>, LLVMMatchType<0>],
   [IntrNoMem, IntrSpeculatable, Commutative]
 >;
+def int_minimum : Intrinsic<[llvm_anyfloat_ty],
+  [LLVMMatchType<0>, LLVMMatchType<0>],
+  [IntrNoMem, IntrSpeculatable, Commutative]
+>;
+def int_maximum : Intrinsic<[llvm_anyfloat_ty],
+  [LLVMMatchType<0>, LLVMMatchType<0>],
+  [IntrNoMem, IntrSpeculatable, Commutative]
+>;
 
 // NOTE: these are internal interfaces.
 def int_setjmp     : Intrinsic<[llvm_i32_ty],  [llvm_ptr_ty]>;
 def int_longjmp    : Intrinsic<[], [llvm_ptr_ty, llvm_i32_ty], [IntrNoReturn]>;
 def int_sigsetjmp  : Intrinsic<[llvm_i32_ty] , [llvm_ptr_ty, llvm_i32_ty]>;
 def int_siglongjmp : Intrinsic<[], [llvm_ptr_ty, llvm_i32_ty], [IntrNoReturn]>;
 
 // Internal interface for object size checking

lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp

unsigned Opc =
         I.hasNoNaNs() && TLI.isOperationLegalOrCustom(ISD::FMAXNAN, VT)
             ? ISD::FMAXNAN
             : ISD::FMAXNUM;
     setValue(&I, DAG.getNode(Opc, sdl, VT,
                              getValue(I.getArgOperand(0)),
                              getValue(I.getArgOperand(1))));
     return nullptr;
   }
+  case Intrinsic::minimum:
+    setValue(&I, DAG.getNode(ISD::FMINNAN, sdl,
+                             getValue(I.getArgOperand(0)).getValueType(),
+                             getValue(I.getArgOperand(0)),
+                             getValue(I.getArgOperand(1))));
+    return nullptr;
+  case Intrinsic::maximum:
+    setValue(&I, DAG.getNode(ISD::FMAXNAN, sdl,
+                             getValue(I.getArgOperand(0)).getValueType(),
+                             getValue(I.getArgOperand(0)),
+                             getValue(I.getArgOperand(1))));
+    return nullptr;
   case Intrinsic::copysign:
     setValue(&I, DAG.getNode(ISD::FCOPYSIGN, sdl,
                              getValue(I.getArgOperand(0)).getValueType(),
                              getValue(I.getArgOperand(0)),
                              getValue(I.getArgOperand(1))));
     return nullptr;
   case Intrinsic::fma:
     setValue(&I, DAG.getNode(ISD::FMA, sdl,

unittests/ADT/APFloatTest.cpp

TEST(APFloatTest, MaxNum) {
   APFloat nan = APFloat::getNaN(APFloat::IEEEdouble());
 
   EXPECT_EQ(2.0, maxnum(f1, f2).convertToDouble());
   EXPECT_EQ(2.0, maxnum(f2, f1).convertToDouble());
   EXPECT_EQ(1.0, maxnum(f1, nan).convertToDouble());
   EXPECT_EQ(1.0, maxnum(nan, f1).convertToDouble());
 }
 
+TEST(APFloatTest, Minimum) {
+  APFloat f1(1.0);
+  APFloat f2(2.0);
+  APFloat zp(0.0);
+  APFloat zn(-0.0);
+  APFloat nan = APFloat::getNaN(APFloat::IEEEdouble());
+
+  EXPECT_EQ(1.0, minimum(f1, f2).convertToDouble());
+  EXPECT_EQ(1.0, minimum(f2, f1).convertToDouble());
+  EXPECT_EQ(-0.0, minimum(zp, zn).convertToDouble());
+  EXPECT_EQ(-0.0, minimum(zn, zp).convertToDouble());
+  EXPECT_TRUE(std::isnan(minimum(f1, nan).convertToDouble()));
+  EXPECT_TRUE(std::isnan(minimum(nan, f1).convertToDouble()));
+}
+
+TEST(APFloatTest, Maximum) {
+  APFloat f1(1.0);
+  APFloat f2(2.0);
+  APFloat zp(0.0);
+  APFloat zn(-0.0);
+  APFloat nan = APFloat::getNaN(APFloat::IEEEdouble());
+
+  EXPECT_EQ(2.0, maximum(f1, f2).convertToDouble());
+  EXPECT_EQ(2.0, maximum(f2, f1).convertToDouble());
+  EXPECT_EQ(0.0, maximum(zp, zn).convertToDouble());
+  EXPECT_EQ(0.0, maximum(zn, zp).convertToDouble());
+  EXPECT_TRUE(std::isnan(maximum(f1, nan).convertToDouble()));
+  EXPECT_TRUE(std::isnan(maximum(nan, f1).convertToDouble()));
+}
+
 TEST(APFloatTest, Denormal) {
   APFloat::roundingMode rdmd = APFloat::rmNearestTiesToEven;
 
   // Test single precision
   {
     const char *MinNormalStr = "1.17549435082228750797e-38";
     EXPECT_FALSE(APFloat(APFloat::IEEEsingle(), MinNormalStr).isDenormal());
     EXPECT_FALSE(APFloat(APFloat::IEEEsingle(), 0.0).isDenormal());

unittests/IR/IRBuilderTest.cpp

TEST_F(IRBuilderTest, Intrinsics) {
   Call = Builder.CreateMinNum(V, V);
   II = cast<IntrinsicInst>(Call);
   EXPECT_EQ(II->getIntrinsicID(), Intrinsic::minnum);
 
   Call = Builder.CreateMaxNum(V, V);
   II = cast<IntrinsicInst>(Call);
   EXPECT_EQ(II->getIntrinsicID(), Intrinsic::maxnum);
 
+  Call = Builder.CreateMinimum(V, V);
+  II = cast<IntrinsicInst>(Call);
+  EXPECT_EQ(II->getIntrinsicID(), Intrinsic::minimum);
+
+  Call = Builder.CreateMaximum(V, V);
+  II = cast<IntrinsicInst>(Call);
+  EXPECT_EQ(II->getIntrinsicID(), Intrinsic::maximum);
+
   Call = Builder.CreateIntrinsic(Intrinsic::readcyclecounter, {}, {});
   II = cast<IntrinsicInst>(Call);
   EXPECT_EQ(II->getIntrinsicID(), Intrinsic::readcyclecounter);
 
   Call = Builder.CreateUnaryIntrinsic(Intrinsic::fabs, V);
   II = cast<IntrinsicInst>(Call);
   EXPECT_EQ(II->getIntrinsicID(), Intrinsic::fabs);
   EXPECT_FALSE(II->hasNoInfs());