[SVE][Inline-Asm] Support for SVE asm operands

[kmclaughlin]

Summary

Adds the following inline asm constraints for SVE:

• w: SVE vector register with full range, Z0 to Z31
• x: Restricted to registers Z0 to Z15 inclusive.
• y: Restricted to registers Z0 to Z7 inclusive.

This change also adds the "z" modifier to interpret a register as an SVE register.

Not all of the bitconvert patterns added by this patch are used, but they have been included here for completeness.

[sdesmalen]

Thanks for this change @kmclaughlin.

docs/LangRef.rst

3816

I noticed this comment does not match the code below, since y only seems to work for scalable vectors, which probably shows this case is missing a test.

[kmclaughlin]

• Added a new test file, aarch64-sve-asm-negative.ll
• Updated description of the 'y' constraint in LangRef.rst

[sdesmalen]

lib/Target/AArch64/AArch64AsmPrinter.cpp

617

The use of hasAltName is confusing me here. When I look at the declaration and definition of printAsmRegInClass, the parameter is called bool isVector, and a SVE vector is still a vector, so passing false is odd. I think it makes more sense to change printAsmRegInClass to accept an unsigned AltName, and just pass AArch64::vreg for Neon Vectors directly (or AArch64::NoRegAltName otherwise).

test/CodeGen/AArch64/aarch64-sve-asm-negative.ll

3

Can you add a comment explaining what this is testing (and why the inline asm below is not valid)?

test/CodeGen/AArch64/aarch64-sve-asm.ll

47

nit: what is this line doing here?

[kmclaughlin]

• Changed printAsmRegInClass in AArch64AsmPrinter.cpp to accept unsigned AltName instead of bool isVector
• Added a comment to explain the test in aarch64-sve-asm-negative.ll

[kmclaughlin]

• Removed a confusing comment from AArch64AsmPrinter.cpp

[sdesmalen]

Thanks for making these changes @kmclaughlin, LGTM!

[gribozavr]

llvm/trunk/lib/Target/AArch64/AArch64ISelLowering.cpp

5836–5837 ↗

(On Diff #218376)

AArch64ISelLowering.cpp:5837:5: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
AArch64ISelLowering.cpp:5837:5: note: insert 'LLVM_FALLTHROUGH;' to silence this warning
AArch64ISelLowering.cpp:5837:5: note: insert 'break;' to avoid fall-through

Is the fallthrough intentional?

[kmclaughlin]

Thank you to @gribozavr & @ruiu for spotting the warning caused by this patch, and the suggestions to use -Wimplicit-fallthrough!

llvm/trunk/lib/Target/AArch64/AArch64ISelLowering.cpp

5836–5837 ↗

(On Diff #218376)

The fallthrough was not intentional; this should now be resolved by D67095

docs/LangRef.rst

- ``M``: An immediate integer for use with the ``MOV`` assembly alias on a
   immediate, also allows immediate integers which can be loaded with a single
   ``MOVZ`` or ``MOVL`` instruction.
 - ``N``: An immediate integer for use with the ``MOV`` assembly alias on a
   64-bit register. This is a superset of ``L``.
 - ``Q``: Memory address operand must be in a single register (no
   offsets). (However, LLVM currently does this for the ``m`` constraint as
   well.)
 - ``r``: A 32 or 64-bit integer register (W* or X*).
-- ``w``: A 32, 64, or 128-bit floating-point/SIMD register.
-- ``x``: A lower 128-bit floating-point/SIMD register (``V0`` to ``V15``).
+- ``w``: A 32, 64, or 128-bit floating-point, SIMD or SVE vector register.
+- ``x``: Like w, but restricted to registers 0 to 15 inclusive.
+- ``y``: Like w, but restricted to SVE vector registers Z0 to Z7 inclusive.
 
 AMDGPU:
 
 - ``r``: A 32 or 64-bit integer register.
 - ``[0-9]v``: The 32-bit VGPR register, number 0-9.
 - ``[0-9]s``: The 32-bit SGPR register, number 0-9.
 
 

lib/Target/AArch64/AArch64AsmPrinter.cpp

bool runOnMachineFunction(MachineFunction &MF) override {
     // We didn't modify anything.
     return false;
   }
 
 private:
   void printOperand(const MachineInstr *MI, unsigned OpNum, raw_ostream &O);
   bool printAsmMRegister(const MachineOperand &MO, char Mode, raw_ostream &O);
   bool printAsmRegInClass(const MachineOperand &MO,
-                          const TargetRegisterClass *RC, bool isVector,
+                          const TargetRegisterClass *RC, unsigned AltName,
                           raw_ostream &O);
 
   bool PrintAsmOperand(const MachineInstr *MI, unsigned OpNum,
                        const char *ExtraCode, raw_ostream &O) override;
   bool PrintAsmMemoryOperand(const MachineInstr *MI, unsigned OpNum,
                              const char *ExtraCode, raw_ostream &O) override;
 
   void PrintDebugValueComment(const MachineInstr *MI, raw_ostream &OS);
bool AArch64AsmPrinter::printAsmMRegister(const MachineOperand &MO, char Mode,
   return false;
 }
 
 // Prints the register in MO using class RC using the offset in the
 // new register class. This should not be used for cross class
 // printing.
 bool AArch64AsmPrinter::printAsmRegInClass(const MachineOperand &MO,
                                            const TargetRegisterClass *RC,
-                                           bool isVector, raw_ostream &O) {
+                                           unsigned AltName, raw_ostream &O) {
   assert(MO.isReg() && "Should only get here with a register!");
   const TargetRegisterInfo *RI = STI->getRegisterInfo();
   Register Reg = MO.getReg();
   unsigned RegToPrint = RC->getRegister(RI->getEncodingValue(Reg));
   assert(RI->regsOverlap(RegToPrint, Reg));
-  O << AArch64InstPrinter::getRegisterName(
-           RegToPrint, isVector ? AArch64::vreg : AArch64::NoRegAltName);
+  O << AArch64InstPrinter::getRegisterName(RegToPrint, AltName);
   return false;
 }
 
 bool AArch64AsmPrinter::PrintAsmOperand(const MachineInstr *MI, unsigned OpNum,
                                         const char *ExtraCode, raw_ostream &O) {
   const MachineOperand &MO = MI->getOperand(OpNum);
 
   // First try the generic code, which knows about modifiers like 'c' and 'n'.
case 'x':      // Print X register
       }
       printOperand(MI, OpNum, O);
       return false;
     case 'b': // Print B register.
     case 'h': // Print H register.
     case 's': // Print S register.
     case 'd': // Print D register.
     case 'q': // Print Q register.
+    case 'z': // Print Z register.
       if (MO.isReg()) {
         const TargetRegisterClass *RC;
         switch (ExtraCode[0]) {
         case 'b':
           RC = &AArch64::FPR8RegClass;
           break;
         case 'h':
           RC = &AArch64::FPR16RegClass;
           break;
         case 's':
           RC = &AArch64::FPR32RegClass;
           break;
         case 'd':
           RC = &AArch64::FPR64RegClass;
           break;
         case 'q':
           RC = &AArch64::FPR128RegClass;
           break;
+        case 'z':
+          RC = &AArch64::ZPRRegClass;
+          break;
         default:
           return true;
         }
-        return printAsmRegInClass(MO, RC, false /* vector */, O);
+        return printAsmRegInClass(MO, RC, AArch64::NoRegAltName, O);
       }
       printOperand(MI, OpNum, O);
       return false;
     }
   }
 
   // According to ARM, we should emit x and v registers unless we have a
   // modifier.
   if (MO.isReg()) {
     Register Reg = MO.getReg();
 
     // If this is a w or x register, print an x register.
     if (AArch64::GPR32allRegClass.contains(Reg) ||
         AArch64::GPR64allRegClass.contains(Reg))
       return printAsmMRegister(MO, 'x', O);
 
+    unsigned AltName = AArch64::NoRegAltName;
+    const TargetRegisterClass *RegClass;
+    if (AArch64::ZPRRegClass.contains(Reg)) {
+      RegClass = &AArch64::ZPRRegClass;
+    } else {
+      RegClass = &AArch64::FPR128RegClass;
+      AltName = AArch64::vreg;
+    }
+
     // If this is a b, h, s, d, or q register, print it as a v register.
-    return printAsmRegInClass(MO, &AArch64::FPR128RegClass, true /* vector */,
-                              O);
+    return printAsmRegInClass(MO, RegClass, AltName /* vector */, O);
   }
 
   printOperand(MI, OpNum, O);
   return false;
 }
 
 bool AArch64AsmPrinter::PrintAsmMemoryOperand(const MachineInstr *MI,
                                               unsigned OpNum,

lib/Target/AArch64/AArch64ISelLowering.cpp

 AArch64TargetLowering::ConstraintType
 AArch64TargetLowering::getConstraintType(StringRef Constraint) const {
   if (Constraint.size() == 1) {
     switch (Constraint[0]) {
     default:
       break;
     case 'x':
     case 'w':
+    case 'y':
       return C_RegisterClass;
     // An address with a single base register. Due to the way we
     // currently handle addresses it is the same as 'r'.
     case 'Q':
       return C_Memory;
     case 'I':
     case 'J':
     case 'K':
AArch64TargetLowering::getSingleConstraintMatchWeight(
   Type *type = CallOperandVal->getType();
   // Look at the constraint type.
   switch (*constraint) {
   default:
     weight = TargetLowering::getSingleConstraintMatchWeight(info, constraint);
     break;
   case 'x':
   case 'w':
+  case 'y':
     if (type->isFloatingPointTy() || type->isVectorTy())
       weight = CW_Register;
     break;
   case 'z':
     weight = CW_Constant;
     break;
   }
   return weight;
 }
 
 std::pair<unsigned, const TargetRegisterClass *>
 AArch64TargetLowering::getRegForInlineAsmConstraint(
     const TargetRegisterInfo *TRI, StringRef Constraint, MVT VT) const {
   if (Constraint.size() == 1) {
     switch (Constraint[0]) {
     case 'r':
       if (VT.getSizeInBits() == 64)
         return std::make_pair(0U, &AArch64::GPR64commonRegClass);
       return std::make_pair(0U, &AArch64::GPR32commonRegClass);
     case 'w':
       if (!Subtarget->hasFPARMv8())
         break;
+      if (VT.isScalableVector())
+        return std::make_pair(0U, &AArch64::ZPRRegClass);
       if (VT.getSizeInBits() == 16)
         return std::make_pair(0U, &AArch64::FPR16RegClass);
       if (VT.getSizeInBits() == 32)
         return std::make_pair(0U, &AArch64::FPR32RegClass);
       if (VT.getSizeInBits() == 64)
         return std::make_pair(0U, &AArch64::FPR64RegClass);
       if (VT.getSizeInBits() == 128)
         return std::make_pair(0U, &AArch64::FPR128RegClass);
       break;
     // The instructions that this constraint is designed for can
     // only take 128-bit registers so just use that regclass.
     case 'x':
       if (!Subtarget->hasFPARMv8())
         break;
+      if (VT.isScalableVector())
+        return std::make_pair(0U, &AArch64::ZPR_4bRegClass);
       if (VT.getSizeInBits() == 128)
         return std::make_pair(0U, &AArch64::FPR128_loRegClass);
+    case 'y':
+      if (!Subtarget->hasFPARMv8())
+        break;
+      if (VT.isScalableVector())
+        return std::make_pair(0U, &AArch64::ZPR_3bRegClass);
       break;
     }
   }
   if (StringRef("{cc}").equals_lower(Constraint))
     return std::make_pair(unsigned(AArch64::NZCV), &AArch64::CCRRegClass);
 
   // Use the default implementation in TargetLowering to convert the register
   // constraint into a member of a register class.

lib/Target/AArch64/AArch64InstrInfo.cpp

if (DestReg == AArch64::WSP || SrcReg == AArch64::WSP) {
         BuildMI(MBB, I, DL, get(AArch64::ORRWrr), DestReg)
             .addReg(AArch64::WZR)
             .addReg(SrcReg, getKillRegState(KillSrc));
       }
     }
     return;
   }
 
+  // Copy a Z register by ORRing with itself.
+  if (AArch64::ZPRRegClass.contains(DestReg) &&
+      AArch64::ZPRRegClass.contains(SrcReg)) {
+    assert(Subtarget.hasSVE() && "Unexpected SVE register.");
+    BuildMI(MBB, I, DL, get(AArch64::ORR_ZZZ), DestReg)
+      .addReg(SrcReg)
+      .addReg(SrcReg, getKillRegState(KillSrc));
+    return;
+  }
+
   if (AArch64::GPR64spRegClass.contains(DestReg) &&
       (AArch64::GPR64spRegClass.contains(SrcReg) || SrcReg == AArch64::XZR)) {
     if (DestReg == AArch64::SP || SrcReg == AArch64::SP) {
       // If either operand is SP, expand to ADD #0.
       BuildMI(MBB, I, DL, get(AArch64::ADDXri), DestReg)
           .addReg(SrcReg, getKillRegState(KillSrc))
           .addImm(0)
           .addImm(AArch64_AM::getShifterImm(AArch64_AM::LSL, 0));

lib/Target/AArch64/AArch64SVEInstrInfo.td

def : InstAlias<"fcmle $Zd, $Pg/z, $Zm, $Zn",
                   (FCMGE_PPzZZ_D PPR64:$Zd, PPR3bAny:$Pg, ZPR64:$Zn, ZPR64:$Zm), 0>;
 
   def : InstAlias<"fcmlt $Zd, $Pg/z, $Zm, $Zn",
                   (FCMGT_PPzZZ_H PPR16:$Zd, PPR3bAny:$Pg, ZPR16:$Zn, ZPR16:$Zm), 0>;
   def : InstAlias<"fcmlt $Zd, $Pg/z, $Zm, $Zn",
                   (FCMGT_PPzZZ_S PPR32:$Zd, PPR3bAny:$Pg, ZPR32:$Zn, ZPR32:$Zm), 0>;
   def : InstAlias<"fcmlt $Zd, $Pg/z, $Zm, $Zn",
                   (FCMGT_PPzZZ_D PPR64:$Zd, PPR3bAny:$Pg, ZPR64:$Zn, ZPR64:$Zm), 0>;
+
+  def : Pat<(nxv16i8 (bitconvert (nxv8i16 ZPR:$src))), (nxv16i8 ZPR:$src)>;
+  def : Pat<(nxv16i8 (bitconvert (nxv4i32 ZPR:$src))), (nxv16i8 ZPR:$src)>;
+  def : Pat<(nxv16i8 (bitconvert (nxv2i64 ZPR:$src))), (nxv16i8 ZPR:$src)>;
+  def : Pat<(nxv16i8 (bitconvert (nxv8f16 ZPR:$src))), (nxv16i8 ZPR:$src)>;
+  def : Pat<(nxv16i8 (bitconvert (nxv4f32 ZPR:$src))), (nxv16i8 ZPR:$src)>;
+  def : Pat<(nxv16i8 (bitconvert (nxv2f64 ZPR:$src))), (nxv16i8 ZPR:$src)>;
+
+  def : Pat<(nxv8i16 (bitconvert (nxv16i8 ZPR:$src))), (nxv8i16 ZPR:$src)>;
+  def : Pat<(nxv8i16 (bitconvert (nxv4i32 ZPR:$src))), (nxv8i16 ZPR:$src)>;
+  def : Pat<(nxv8i16 (bitconvert (nxv2i64 ZPR:$src))), (nxv8i16 ZPR:$src)>;
+  def : Pat<(nxv8i16 (bitconvert (nxv8f16 ZPR:$src))), (nxv8i16 ZPR:$src)>;
+  def : Pat<(nxv8i16 (bitconvert (nxv4f32 ZPR:$src))), (nxv8i16 ZPR:$src)>;
+  def : Pat<(nxv8i16 (bitconvert (nxv2f64 ZPR:$src))), (nxv8i16 ZPR:$src)>;
+
+  def : Pat<(nxv4i32 (bitconvert (nxv16i8 ZPR:$src))), (nxv4i32 ZPR:$src)>;
+  def : Pat<(nxv4i32 (bitconvert (nxv8i16 ZPR:$src))), (nxv4i32 ZPR:$src)>;
+  def : Pat<(nxv4i32 (bitconvert (nxv2i64 ZPR:$src))), (nxv4i32 ZPR:$src)>;
+  def : Pat<(nxv4i32 (bitconvert (nxv8f16 ZPR:$src))), (nxv4i32 ZPR:$src)>;
+  def : Pat<(nxv4i32 (bitconvert (nxv4f32 ZPR:$src))), (nxv4i32 ZPR:$src)>;
+  def : Pat<(nxv4i32 (bitconvert (nxv2f64 ZPR:$src))), (nxv4i32 ZPR:$src)>;
+
+  def : Pat<(nxv2i64 (bitconvert (nxv16i8 ZPR:$src))), (nxv2i64 ZPR:$src)>;
+  def : Pat<(nxv2i64 (bitconvert (nxv8i16 ZPR:$src))), (nxv2i64 ZPR:$src)>;
+  def : Pat<(nxv2i64 (bitconvert (nxv4i32 ZPR:$src))), (nxv2i64 ZPR:$src)>;
+  def : Pat<(nxv2i64 (bitconvert (nxv8f16 ZPR:$src))), (nxv2i64 ZPR:$src)>;
+  def : Pat<(nxv2i64 (bitconvert (nxv4f32 ZPR:$src))), (nxv2i64 ZPR:$src)>;
+  def : Pat<(nxv2i64 (bitconvert (nxv2f64 ZPR:$src))), (nxv2i64 ZPR:$src)>;
+
+  def : Pat<(nxv8f16 (bitconvert (nxv16i8 ZPR:$src))), (nxv8f16 ZPR:$src)>;
+  def : Pat<(nxv8f16 (bitconvert (nxv8i16 ZPR:$src))), (nxv8f16 ZPR:$src)>;
+  def : Pat<(nxv8f16 (bitconvert (nxv4i32 ZPR:$src))), (nxv8f16 ZPR:$src)>;
+  def : Pat<(nxv8f16 (bitconvert (nxv2i64 ZPR:$src))), (nxv8f16 ZPR:$src)>;
+  def : Pat<(nxv8f16 (bitconvert (nxv4f32 ZPR:$src))), (nxv8f16 ZPR:$src)>;
+  def : Pat<(nxv8f16 (bitconvert (nxv2f64 ZPR:$src))), (nxv8f16 ZPR:$src)>;
+
+  def : Pat<(nxv4f32 (bitconvert (nxv16i8 ZPR:$src))), (nxv4f32 ZPR:$src)>;
+  def : Pat<(nxv4f32 (bitconvert (nxv8i16 ZPR:$src))), (nxv4f32 ZPR:$src)>;
+  def : Pat<(nxv4f32 (bitconvert (nxv4i32 ZPR:$src))), (nxv4f32 ZPR:$src)>;
+  def : Pat<(nxv4f32 (bitconvert (nxv2i64 ZPR:$src))), (nxv4f32 ZPR:$src)>;
+  def : Pat<(nxv4f32 (bitconvert (nxv8f16 ZPR:$src))), (nxv4f32 ZPR:$src)>;
+  def : Pat<(nxv4f32 (bitconvert (nxv2f64 ZPR:$src))), (nxv4f32 ZPR:$src)>;
+
+  def : Pat<(nxv2f64 (bitconvert (nxv16i8 ZPR:$src))), (nxv2f64 ZPR:$src)>;
+  def : Pat<(nxv2f64 (bitconvert (nxv8i16 ZPR:$src))), (nxv2f64 ZPR:$src)>;
+  def : Pat<(nxv2f64 (bitconvert (nxv4i32 ZPR:$src))), (nxv2f64 ZPR:$src)>;
+  def : Pat<(nxv2f64 (bitconvert (nxv2i64 ZPR:$src))), (nxv2f64 ZPR:$src)>;
+  def : Pat<(nxv2f64 (bitconvert (nxv8f16 ZPR:$src))), (nxv2f64 ZPR:$src)>;
+  def : Pat<(nxv2f64 (bitconvert (nxv4f32 ZPR:$src))), (nxv2f64 ZPR:$src)>;
+
 }
 
 let Predicates = [HasSVE2] in {
   // SVE2 integer multiply-add (indexed)
   defm MLA_ZZZI : sve2_int_mla_by_indexed_elem<0b01, 0b0, "mla">;
   defm MLS_ZZZI : sve2_int_mla_by_indexed_elem<0b01, 0b1, "mls">;
 
   // SVE2 saturating multiply-add high (indexed)

test/CodeGen/AArch64/aarch64-sve-asm-negative.ll

+; RUN: not llc -mtriple aarch64-none-linux-gnu -mattr=+neon -o %t.s -filetype=asm %s 2>&1 | FileCheck %s
+
+; The 'y' constraint only applies to SVE vector registers (Z0-Z7)
+; The test below ensures that we get an appropriate error should the
+; constraint be used with a Neon register.
+
+; Function Attrs: nounwind readnone
+; CHECK: error: couldn't allocate input reg for constraint 'y'
+define <4 x i32> @test_neon(<4 x i32> %in1, <4 x i32> %in2) {
+  %1 = tail call <4 x i32> asm "add $0.4s, $1.4s, $2.4s", "=w,w,y"(<4 x i32> %in1, <4 x i32> %in2)
+  ret <4 x i32> %1
+}

test/CodeGen/AArch64/aarch64-sve-asm.ll

+; RUN: llc < %s -mtriple aarch64-none-linux-gnu -mattr=+sve -stop-after=finalize-isel | FileCheck %s --check-prefix=CHECK
+
+target datalayout = "e-m:e-i64:64-i128:128-n32:64-S128"
+target triple = "aarch64-none-linux-gnu"
+
+; Function Attrs: nounwind readnone
+; CHECK: [[ARG1:%[0-9]+]]:zpr = COPY $z1
+; CHECK: [[ARG2:%[0-9]+]]:zpr = COPY $z0
+; CHECK: [[ARG3:%[0-9]+]]:zpr = COPY [[ARG2]]
+; CHECK: [[ARG4:%[0-9]+]]:zpr_3b = COPY [[ARG1]]
+define <vscale x 16 x i8> @test_svadd_i8(<vscale x 16 x i8> %Zn, <vscale x 16 x i8> %Zm) {
+  %1 = tail call <vscale x 16 x i8> asm "add $0.b, $1.b, $2.b", "=w,w,y"(<vscale x 16 x i8> %Zn, <vscale x 16 x i8> %Zm)
+  ret <vscale x 16 x i8> %1
+}
+
+; Function Attrs: nounwind readnone
+; CHECK: [[ARG1:%[0-9]+]]:zpr = COPY $z1
+; CHECK: [[ARG2:%[0-9]+]]:zpr = COPY $z0
+; CHECK: [[ARG3:%[0-9]+]]:zpr = COPY [[ARG2]]
+; CHECK: [[ARG4:%[0-9]+]]:zpr_4b = COPY [[ARG1]]
+define <vscale x 2 x i64> @test_svsub_i64(<vscale x 2 x i64> %Zn, <vscale x 2 x i64> %Zm) {
+  %1 = tail call <vscale x 2 x i64> asm "sub $0.d, $1.d, $2.d", "=w,w,x"(<vscale x 2 x i64> %Zn, <vscale x 2 x i64> %Zm)
+  ret <vscale x 2 x i64> %1
+}
+
+; Function Attrs: nounwind readnone
+; CHECK: [[ARG1:%[0-9]+]]:zpr = COPY $z1
+; CHECK: [[ARG2:%[0-9]+]]:zpr = COPY $z0
+; CHECK: [[ARG3:%[0-9]+]]:zpr = COPY [[ARG2]]
+; CHECK: [[ARG4:%[0-9]+]]:zpr_3b = COPY [[ARG1]]
+define <vscale x 8 x half> @test_svfmul_f16(<vscale x 8 x half> %Zn, <vscale x 8 x half> %Zm) {
+  %1 = tail call <vscale x 8 x half> asm "fmul $0.h, $1.h, $2.h", "=w,w,y"(<vscale x 8 x half> %Zn, <vscale x 8 x half> %Zm)
+  ret <vscale x 8 x half> %1
+}
+
+; Function Attrs: nounwind readnone
+; CHECK: [[ARG1:%[0-9]+]]:zpr = COPY $z1
+; CHECK: [[ARG2:%[0-9]+]]:zpr = COPY $z0
+; CHECK: [[ARG3:%[0-9]+]]:zpr = COPY [[ARG2]]
+; CHECK: [[ARG4:%[0-9]+]]:zpr_4b = COPY [[ARG1]]
+define <vscale x 4 x float> @test_svfmul_f(<vscale x 4 x float> %Zn, <vscale x 4 x float> %Zm) {
+  %1 = tail call <vscale x 4 x float> asm "fmul $0.s, $1.s, $2.s", "=w,w,x"(<vscale x 4 x float> %Zn, <vscale x 4 x float> %Zm)
+  ret <vscale x 4 x float> %1
+}

test/CodeGen/AArch64/arm64-inline-asm.ll

 
 define void @t10() nounwind {
 entry:
   ; CHECK-LABEL: t10:
   %data = alloca <2 x float>, align 8
   %a = alloca [2 x float], align 4
   %arraydecay = getelementptr inbounds [2 x float], [2 x float]* %a, i32 0, i32 0
   %0 = load <2 x float>, <2 x float>* %data, align 8
+  call void asm sideeffect "ldr ${1:z}, [$0]\0A", "r,w"(float* %arraydecay, <2 x float> %0) nounwind
+  ; CHECK: ldr {{z[0-9]+}}, [{{x[0-9]+}}]
   call void asm sideeffect "ldr ${1:q}, [$0]\0A", "r,w"(float* %arraydecay, <2 x float> %0) nounwind
   ; CHECK: ldr {{q[0-9]+}}, [{{x[0-9]+}}]
   call void asm sideeffect "ldr ${1:d}, [$0]\0A", "r,w"(float* %arraydecay, <2 x float> %0) nounwind
   ; CHECK: ldr {{d[0-9]+}}, [{{x[0-9]+}}]
   call void asm sideeffect "ldr ${1:s}, [$0]\0A", "r,w"(float* %arraydecay, <2 x float> %0) nounwind
   ; CHECK: ldr {{s[0-9]+}}, [{{x[0-9]+}}]
   call void asm sideeffect "ldr ${1:h}, [$0]\0A", "r,w"(float* %arraydecay, <2 x float> %0) nounwind
   ; CHECK: ldr {{h[0-9]+}}, [{{x[0-9]+}}]