[mlir] support translating OpenMP loops with reductions

[ftynse]

Summary

Use the recently introduced OpenMPIRBuilder facility to transate OpenMP
workshare loops with reductions to LLVM IR calling OpenMP runtime. Most of the
heavy lifting is done at the OpenMPIRBuilder. When other OpenMP dialect
constructs grow support for reductions, the translation can be updated to
operate on, e.g., an operation interface for all reduction containers instead
of workshare loops specifically. Designing such a generic translation for the
single operation that currently supports reductions is premature since we don't
know how the reduction modeling itself will be generalized.

[wsmoses]

mlir/lib/Target/LLVMIR/Dialect/OpenMP/OpenMPToLLVMIRTranslation.cpp

185

I'd add some text here about why the (to me unexpected) default behavior of forgetMapping that isn't recursive, is desired.

324

Nit, doesn't => don't

mlir/test/Target/LLVMIR/openmp-reduction.mlir

401

Presumably handled elsewhere, but I would like to see a custom reducer, or alternatively ensure an XFAIL for a reduction without an equivalent atomic operation. For example if the reduction body were something like the following which picks the value which has the least value when squared. The actual reduction doesn't matter so long as it's something for which there isn't an atomic op (I know there's an atomic min, but believe that this case can't handled by it).

^bb1(%arg0: f32, %arg1: f32):
  %arg0Sq = llvm.fmul %arg0, %arg0
  %arg1Sq = llvm.fmul %arg1, %arg1
  %cmp = llvm.fcmp olt %arg0Sq, %arg1Sq
  %1 = llvm.select %cmp %arg0, %arg1 : f32
  omp.yield (%1 : f32)
}

Also note that I'm not suggesting this be handled presently, just want to double check that this doesn't accidentally and incorrectly succeed if not yet fully implemented.

[ftynse]

Address review.

mlir/test/Target/LLVMIR/openmp-reduction.mlir

401

OpenMP can handle non-atomic reductions fine, atomic is an optimization. The reduction declaration has an optional atomic region that indicates how to combine two values atomically. At no point the translation will try to turn something atomic or non-atomic, it merely passes on whatever is present in the declaration. If the atomic region is missing, OpenMPIRBuilder::createReductions will just emit IR that instructs the runtime to never go on the atomic path. There is an additional safeguard of having unreachable in the branch that would have been taken had the runtime decided to go on the atomic pass. This test checks exactly this, 5 lines above.

[kiranchandramohan]

Thanks, @ftynse for this patch. I have started going through this patch. Have a few questions.

mlir/include/mlir/Target/LLVMIR/ModuleTranslation.h

176

I don't see any changes in convertBlock to use convertOp.

mlir/lib/Target/LLVMIR/Dialect/OpenMP/OpenMPToLLVMIRTranslation.cpp

90

Is this the correct successor block? Or will it be corrected later on?

111–119

Should this be part of the verifier or a verification pass?

186

Is that true for nested OpenMP regions?

mlir/lib/Target/LLVMIR/ModuleTranslation.cpp

714

Is making the LLVM IR ModuleTranslation aware of omp::ReductionDeclareOp the only way possible?

mlir/test/Target/LLVMIR/openmp-reduction.mlir

68

Nit spelling: reduciton -> reduction. Here and in a few other places as well.

[ftynse]

Address review.

mlir/lib/Target/LLVMIR/Dialect/OpenMP/OpenMPToLLVMIRTranslation.cpp

90

It's not not a successor block but the block before which the created block is inserted in the IR (https://llvm.org/doxygen/classllvm_1_1BasicBlock.html#ace940beeee97c222f836fe0ac70f6cf5), there's no branch being created.

111–119

It is verified in reduction regions where this is actually necessary, but I prefer to assert liberally here in case somebody later decides to use omp.yield differently from current uses

186

Okay, since you both think recursion might be necessary (there are no cases currently), I made forgetMapping traverse nested regions.

mlir/lib/Target/LLVMIR/ModuleTranslation.cpp

714

I'm considering to drop this check entirely, but so far this looks like the simplest change.

[ftynse]

On a second thought, we can recycle the operation conversion flexibility to
support top-level operations that are not functions or globals. Functions and
globals need explicit support because of potential definition/reference cycles
in them that requires function signatures to be translated before globals and
separately from function bodies.

[ftynse]

Drop unnecessary library dependencies.

[kiranchandramohan]

Looks OK. I have one question remaining to clear my understanding.

mlir/lib/Target/LLVMIR/Dialect/OpenMP/OpenMPToLLVMIRTranslation.cpp

681

Nit: Available as ompBuilder from 582.
Also applies for 686.

683

Is this related to the nowait of the worksharing loop?

734–735

The OpenMPIRBuilder already takes in OwningReductionGen and OwningAtomicReductionGen which inlines the reduction body based on whether it is non-atomic or atomic. Why is a separate non-atomic reduction required?

[ftynse]

Adress more review.

mlir/lib/Target/LLVMIR/Dialect/OpenMP/OpenMPToLLVMIRTranslation.cpp

734–735

Because we also need to generate the body of the reduction in the loop:

#pragma omp parallel for reduction(+:x)
for (...) {
  x += 42; //< this needs to be in the IR executed by the loop,
           //< and we just `omp.reduce 42` in MLIR.
}

[kiranchandramohan]

LGTM. Thanks @ftynse.

mlir/include/mlir/Target/LLVMIR/ModuleTranslation.h

llvm::Value *&mapValue(Value value) {
     return llvm;
   }
 
   /// Finds an LLVM IR value corresponding to the given MLIR value.
   llvm::Value *lookupValue(Value value) const {
     return valueMapping.lookup(value);
   }
 
+  /// Looks up remapped a list of remapped values.
+  SmallVector<llvm::Value *> lookupValues(ValueRange values);
+
   /// Stores the mapping between an MLIR block and LLVM IR basic block.
   void mapBlock(Block *mlir, llvm::BasicBlock *llvm) {
     auto result = blockMapping.try_emplace(mlir, llvm);
     (void)result;
     assert(result.second && "attempting to map a block that is already mapped");
   }
 
   /// Finds an LLVM IR basic block that corresponds to the given MLIR block.
public:
   }
 
   /// Finds an LLVM IR instruction that corresponds to the given MLIR operation
   /// with successors.
   llvm::Instruction *lookupBranch(Operation *op) const {
     return branchMapping.lookup(op);
   }
 
+  /// Removes the mapping for blocks contained in the region and values defined
+  /// in these blocks.
+  void forgetMapping(Region &region);
+
   /// Returns the LLVM metadata corresponding to a reference to an mlir LLVM
   /// dialect access group operation.
   llvm::MDNode *getAccessGroup(Operation &opInst,
                                SymbolRefAttr accessGroupRef) const;
 
   /// Returns the LLVM metadata corresponding to a llvm loop's codegen
   /// options attribute.
   llvm::MDNode *lookupLoopOptionsMetadata(Attribute options) const {
     return loopOptionsMetadataMapping.lookup(options);
   }
 
   void mapLoopOptionsMetadata(Attribute options, llvm::MDNode *metadata) {
     auto result = loopOptionsMetadataMapping.try_emplace(options, metadata);
     (void)result;
     assert(result.second &&
            "attempting to map loop options that was already mapped");
   }
 
   // Sets LLVM metadata for memory operations that are in a parallel loop.
   void setAccessGroupsMetadata(Operation *op, llvm::Instruction *inst);
 
   /// Converts the type from MLIR LLVM dialect to LLVM.
   llvm::Type *convertType(Type type);
 
-  /// Looks up remapped a list of remapped values.
-  SmallVector<llvm::Value *, 8> lookupValues(ValueRange values);
-
   /// Returns the MLIR context of the module being translated.
   MLIRContext &getContext() { return *mlirModule->getContext(); }
 
   /// Returns the LLVM context in which the IR is being constructed.
   llvm::LLVMContext &getLLVMContext() const { return llvmModule->getContext(); }
 
   /// Finds an LLVM IR global value that corresponds to the given MLIR operation
   /// defining a global value.
public:
 
   /// Translates the contents of the given block to LLVM IR using this
   /// translator. The LLVM IR basic block corresponding to the given block is
   /// expected to exist in the mapping of this translator. Uses `builder` to
   /// translate the IR, leaving it at the end of the block. If `ignoreArguments`
   /// is set, does not produce PHI nodes for the block arguments. Otherwise, the
   /// PHI nodes are constructed for block arguments but are _not_ connected to
   /// the predecessors that may not exist yet.
   LogicalResult convertBlock(Block &bb, bool ignoreArguments,
                              llvm::IRBuilderBase &builder);
 
   /// Gets the named metadata in the LLVM IR module being constructed, creating
   /// it if it does not exist.
   llvm::NamedMDNode *getOrInsertNamedModuleMetadata(StringRef name);
 
   /// Common CRTP base class for ModuleTranslation stack frames.
   class StackFrame {
public:
   };
 
   /// Creates a stack frame of type `T` on ModuleTranslation stack. `T` must
   /// be derived from `StackFrameBase<T>` and constructible from the provided
   /// arguments. Doing this before entering the region of the op being
   /// translated makes the frame available when translating ops within that
   /// region.
   template <typename T, typename... Args>
-  void stackPush(Args &&... args) {
+  void stackPush(Args &&...args) {
     static_assert(
         std::is_base_of<StackFrame, T>::value,
         "can only push instances of StackFrame on ModuleTranslation stack");
     stack.push_back(std::make_unique<T>(std::forward<Args>(args)...));
   }
 
   /// Pops the last element from the ModuleTranslation stack.
   void stackPop() { stack.pop_back(); }

mlir/lib/Target/LLVMIR/CMakeLists.txt

add_mlir_translation_library(MLIRTargetLLVMIRExport
 
   LINK_COMPONENTS
   Core
   FrontendOpenMP
   TransformUtils
 
   LINK_LIBS PUBLIC
   MLIRLLVMIR
-  MLIROpenACC
-  MLIROpenMP
   MLIRLLVMIRTransforms
   MLIRTranslation
   )
 
 add_mlir_translation_library(MLIRToLLVMIRTranslationRegistration
   ConvertToLLVMIR.cpp
 
   LINK_LIBS PUBLIC

mlir/lib/Target/LLVMIR/Dialect/OpenMP/OpenMPToLLVMIRTranslation.cpp

 //===- OpenMPToLLVMIRTranslation.cpp - Translate OpenMP dialect to LLVM IR-===//
 //
 // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
 // See https://llvm.org/LICENSE.txt for license information.
 // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
 //
 //===----------------------------------------------------------------------===//
 //
 // This file implements a translation between the MLIR OpenMP dialect and LLVM
 // IR.
 //
 //===----------------------------------------------------------------------===//
 #include "mlir/Target/LLVMIR/Dialect/OpenMP/OpenMPToLLVMIRTranslation.h"
 #include "mlir/Dialect/OpenMP/OpenMPDialect.h"
+#include "mlir/IR/BlockAndValueMapping.h"
 #include "mlir/IR/Operation.h"
 #include "mlir/Support/LLVM.h"
 #include "mlir/Target/LLVMIR/ModuleTranslation.h"
 
 #include "llvm/ADT/SetVector.h"
 #include "llvm/ADT/TypeSwitch.h"
 #include "llvm/Frontend/OpenMP/OMPIRBuilder.h"
 #include "llvm/IR/IRBuilder.h"
 
 using namespace mlir;
 
 namespace {
 /// ModuleTranslation stack frame for OpenMP operations. This keeps track of the
 /// insertion points for allocas.
 class OpenMPAllocaStackFrame
     : public LLVM::ModuleTranslation::StackFrameBase<OpenMPAllocaStackFrame> {
 public:
   explicit OpenMPAllocaStackFrame(llvm::OpenMPIRBuilder::InsertPointTy allocaIP)
       : allocaInsertPoint(allocaIP) {}
   llvm::OpenMPIRBuilder::InsertPointTy allocaInsertPoint;
 };
+
+/// ModuleTranslation stack frame containing the partial mapping between MLIR
+/// values and their LLVM IR equivalents.
+class OpenMPVarMappingStackFrame
+    : public LLVM::ModuleTranslation::StackFrameBase<
+          OpenMPVarMappingStackFrame> {
+public:
+  explicit OpenMPVarMappingStackFrame(
+      const DenseMap<Value, llvm::Value *> &mapping)
+      : mapping(mapping) {}
+
+  DenseMap<Value, llvm::Value *> mapping;
+};
 } // namespace
 
 /// Find the insertion point for allocas given the current insertion point for
 /// normal operations in the builder.
 static llvm::OpenMPIRBuilder::InsertPointTy
 findAllocaInsertPoint(llvm::IRBuilderBase &builder,
                       const LLVM::ModuleTranslation &moduleTranslation) {
   // If there is an alloca insertion point on stack, i.e. we are in a nested
llvm::BasicBlock &funcEntryBlock =
       builder.GetInsertBlock()->getParent()->getEntryBlock();
   return llvm::OpenMPIRBuilder::InsertPointTy(
       &funcEntryBlock, funcEntryBlock.getFirstInsertionPt());
 }
 
 /// Converts the given region that appears within an OpenMP dialect operation to
 /// LLVM IR, creating a branch from the `sourceBlock` to the entry block of the
 /// region, and a branch from any block with an successor-less OpenMP terminator
-/// to `continuationBlock`.
-static void convertOmpOpRegions(Region &region, StringRef blockName,
-                                llvm::BasicBlock &sourceBlock,
-                                llvm::BasicBlock &continuationBlock,
-                                llvm::IRBuilderBase &builder,
-                                LLVM::ModuleTranslation &moduleTranslation,
-                                LogicalResult &bodyGenStatus) {
+/// to `continuationBlock`. Populates `continuationBlockPHIs` with the PHI nodes
+/// of the continuation block if provided.
+static void convertOmpOpRegions(
+    Region &region, StringRef blockName, llvm::BasicBlock &sourceBlock,
+    llvm::BasicBlock &continuationBlock, llvm::IRBuilderBase &builder,
+    LLVM::ModuleTranslation &moduleTranslation, LogicalResult &bodyGenStatus,
+    SmallVectorImpl<llvm::PHINode *> *continuationBlockPHIs = nullptr) {
   llvm::LLVMContext &llvmContext = builder.getContext();
   for (Block &bb : region) {
     llvm::BasicBlock *llvmBB = llvm::BasicBlock::Create(
-        llvmContext, blockName, builder.GetInsertBlock()->getParent());
+        llvmContext, blockName, builder.GetInsertBlock()->getParent(),
+        builder.GetInsertBlock()->getNextNode());
     moduleTranslation.mapBlock(&bb, llvmBB);
   }
 
   llvm::Instruction *sourceTerminator = sourceBlock.getTerminator();
 
+  // Terminators (namely YieldOp) may be forwarding values to the region that
+  // need to be available in the continuation block. Collect the types of these
+  // operands in preparation of creating PHI nodes.
+  SmallVector<llvm::Type *> continuationBlockPHITypes;
+  bool operandsProcessed = false;
+  unsigned numYields = 0;
+  for (Block &bb : region.getBlocks()) {
+    if (omp::YieldOp yield = dyn_cast<omp::YieldOp>(bb.getTerminator())) {
+      if (!operandsProcessed) {
+        for (unsigned i = 0, e = yield->getNumOperands(); i < e; ++i) {
+          continuationBlockPHITypes.push_back(
+              moduleTranslation.convertType(yield->getOperand(i).getType()));
+        }
+        operandsProcessed = true;
+      } else {
+        assert(continuationBlockPHITypes.size() == yield->getNumOperands() &&
+               "mismatching number of values yielded from the region");
+        for (unsigned i = 0, e = yield->getNumOperands(); i < e; ++i) {
+          llvm::Type *operandType =
+              moduleTranslation.convertType(yield->getOperand(i).getType());
+          (void)operandType;
+          assert(continuationBlockPHITypes[i] == operandType &&
+                 "values of mismatching types yielded from the region");
+        }
+      }
+      numYields++;
+    }
+  }
+
+  // Insert PHI nodes in the continuation block for any values forwarded by the
+  // terminators in this region.
+  if (!continuationBlockPHITypes.empty())
+    assert(
+        continuationBlockPHIs &&
+        "expected continuation block PHIs if converted regions yield values");
+  if (continuationBlockPHIs) {
+    llvm::IRBuilderBase::InsertPointGuard guard(builder);
+    continuationBlockPHIs->reserve(continuationBlockPHITypes.size());
+    builder.SetInsertPoint(&continuationBlock, continuationBlock.begin());
+    for (llvm::Type *ty : continuationBlockPHITypes)
+      continuationBlockPHIs->push_back(builder.CreatePHI(ty, numYields));
+  }
+
   // Convert blocks one by one in topological order to ensure
   // defs are converted before uses.
   SetVector<Block *> blocks =
       LLVM::detail::getTopologicallySortedBlocks(region);
   for (Block *bb : blocks) {
     llvm::BasicBlock *llvmBB = moduleTranslation.lookupBlock(bb);
     // Retarget the branch of the entry block to the entry block of the
     // converted region (regions are single-entry).
for (Block *bb : blocks) {
 
     // Special handling for `omp.yield` and `omp.terminator` (we may have more
     // than one): they return the control to the parent OpenMP dialect operation
     // so replace them with the branch to the continuation block. We handle this
     // here to avoid relying inter-function communication through the
     // ModuleTranslation class to set up the correct insertion point. This is
     // also consistent with MLIR's idiom of handling special region terminators
     // in the same code that handles the region-owning operation.
-    if (isa<omp::TerminatorOp, omp::YieldOp>(bb->getTerminator()))
+    Operation *terminator = bb->getTerminator();
+    if (isa<omp::TerminatorOp, omp::YieldOp>(terminator)) {
       builder.CreateBr(&continuationBlock);
+
+      for (unsigned i = 0, e = terminator->getNumOperands(); i < e; ++i)
+        (*continuationBlockPHIs)[i]->addIncoming(
+            moduleTranslation.lookupValue(terminator->getOperand(i)), llvmBB);
     }
-  // Finally, after all blocks have been traversed and values mapped,
-  // connect the PHI nodes to the results of preceding blocks.
+  }
+  // After all blocks have been traversed and values mapped, connect the PHI
+  // nodes to the results of preceding blocks.
   LLVM::detail::connectPHINodes(region, moduleTranslation);
+
+  // Remove the blocks and values defined in this region from the mapping since
+  // they are not visible outside of this region. This allows the same region to
+  // be converted several times, that is cloned, without clashes, and slightly
+  // speeds up the lookups.
+  moduleTranslation.forgetMapping(region);
 }
 
 /// Converts the OpenMP parallel operation to LLVM IR.
 static LogicalResult
 convertOmpParallel(Operation &opInst, llvm::IRBuilderBase &builder,
                    LLVM::ModuleTranslation &moduleTranslation) {
   using InsertPointTy = llvm::OpenMPIRBuilder::InsertPointTy;
   // TODO: support error propagation in OpenMPIRBuilder and use it instead of
convertOmpCritical(Operation &opInst, llvm::IRBuilderBase &builder,
   } else {
     hint = llvm::ConstantInt::get(llvm::Type::getInt32Ty(llvmContext), 0);
   }
   builder.restoreIP(moduleTranslation.getOpenMPBuilder()->createCritical(
       ompLoc, bodyGenCB, finiCB, criticalOp.name().getValueOr(""), hint));
   return success();
 }
 
+/// Returns a reduction declaration that corresponds to the given reduction
+/// operation in the given container. Currently only supports reductions inside
+/// WsLoopOp but can be easily extended.
+static omp::ReductionDeclareOp findReductionDecl(omp::WsLoopOp container,
+                                                 omp::ReductionOp reduction) {
+  SymbolRefAttr reductionSymbol;
+  for (unsigned i = 0, e = container.getNumReductionVars(); i < e; ++i) {
+    if (container.reduction_vars()[i] != reduction.accumulator())
+      continue;
+    reductionSymbol = (*container.reductions())[i].cast<SymbolRefAttr>();
+    break;
+  }
+  assert(reductionSymbol &&
+         "reduction operation must be associated with a declaration");
+
+  return SymbolTable::lookupNearestSymbolFrom<omp::ReductionDeclareOp>(
+      container, reductionSymbol);
+}
+
+/// Populates `reductions` with reduction declarations used in the given loop.
+static void
+collectReductionDecls(omp::WsLoopOp loop,
+                      SmallVectorImpl<omp::ReductionDeclareOp> &reductions) {
+  Optional<ArrayAttr> attr = loop.reductions();
+  if (!attr)
+    return;
+
+  reductions.reserve(reductions.size() + loop.getNumReductionVars());
+  for (auto symbolRef : attr->getAsRange<SymbolRefAttr>()) {
+    reductions.push_back(
+        SymbolTable::lookupNearestSymbolFrom<omp::ReductionDeclareOp>(
+            loop, symbolRef));
+  }
+}
+
+/// Translates the blocks contained in the given region and appends them to at
+/// the current insertion point of `builder`. The operations of the entry block
+/// are appended to the current insertion block, which is not expected to have a
+/// terminator. If set, `continuationBlockArgs` is populated with translated
+/// values that correspond to the values omp.yield'ed from the region.
+static LogicalResult inlineConvertOmpRegions(
+    Region &region, StringRef blockName, llvm::IRBuilderBase &builder,
+    LLVM::ModuleTranslation &moduleTranslation,
+    SmallVectorImpl<llvm::Value *> *continuationBlockArgs = nullptr) {
+  if (region.empty())
+    return success();
+
+  // Special case for single-block regions that don't create additional blocks:
+  // insert operations without creating additional blocks.
+  if (llvm::hasSingleElement(region)) {
+    moduleTranslation.mapBlock(&region.front(), builder.GetInsertBlock());
+    if (failed(moduleTranslation.convertBlock(
+            region.front(), /*ignoreArguments=*/true, builder)))
+      return failure();
+
+    // The continuation arguments are simply the translated terminator operands.
+    if (continuationBlockArgs)
+      llvm::append_range(
+          *continuationBlockArgs,
+          moduleTranslation.lookupValues(region.front().back().getOperands()));
+
+    // Drop the mapping that is no longer necessary so that the same region can
+    // be processed multiple times.
+    moduleTranslation.forgetMapping(region);
+    return success();
+  }
+
+  // Create the continuation block manually instead of calling splitBlock
+  // because the current insertion block may not have a terminator.
+  llvm::BasicBlock *continuationBlock =
+      llvm::BasicBlock::Create(builder.getContext(), blockName + ".cont",
+                               builder.GetInsertBlock()->getParent(),
+                               builder.GetInsertBlock()->getNextNode());
+  builder.CreateBr(continuationBlock);
+
+  LogicalResult bodyGenStatus = success();
+  SmallVector<llvm::PHINode *> phis;
+  convertOmpOpRegions(region, blockName, *builder.GetInsertBlock(),
+                      *continuationBlock, builder, moduleTranslation,
+                      bodyGenStatus, &phis);
+  if (failed(bodyGenStatus))
+    return failure();
+  if (continuationBlockArgs)
+    llvm::append_range(*continuationBlockArgs, phis);
+  builder.SetInsertPoint(continuationBlock,
+                         continuationBlock->getFirstInsertionPt());
+  return success();
+}
+
+namespace {
+/// Owning equivalents of OpenMPIRBuilder::(Atomic)ReductionGen that are used to
+/// store lambdas with capture.
+using OwningReductionGen = std::function<llvm::OpenMPIRBuilder::InsertPointTy(
+    llvm::OpenMPIRBuilder::InsertPointTy, llvm::Value *, llvm::Value *,
+    llvm::Value *&)>;
+using OwningAtomicReductionGen =
+    std::function<llvm::OpenMPIRBuilder::InsertPointTy(
+        llvm::OpenMPIRBuilder::InsertPointTy, llvm::Value *, llvm::Value *)>;
+} // namespace
+
+/// Create an OpenMPIRBuilder-compatible reduction generator for the given
+/// reduction declaration. The generator uses `builder` but ignores its
+/// insertion point.
+static OwningReductionGen
+makeReductionGen(omp::ReductionDeclareOp decl, llvm::IRBuilderBase &builder,
+                 LLVM::ModuleTranslation &moduleTranslation) {
+  // The lambda is mutable because we need access to non-const methods of decl
+  // (which aren't actually mutating it), and we must capture decl by-value to
+  // avoid the dangling reference after the parent function returns.
+  OwningReductionGen gen =
+      [&, decl](llvm::OpenMPIRBuilder::InsertPointTy insertPoint,
+                llvm::Value *lhs, llvm::Value *rhs,
+                llvm::Value *&result) mutable {
+        Region &reductionRegion = decl.reductionRegion();
+        moduleTranslation.mapValue(reductionRegion.front().getArgument(0), lhs);
+        moduleTranslation.mapValue(reductionRegion.front().getArgument(1), rhs);
+        builder.restoreIP(insertPoint);
+        SmallVector<llvm::Value *> phis;
+        if (failed(inlineConvertOmpRegions(reductionRegion,
+                                           "omp.reduction.nonatomic.body",
+                                           builder, moduleTranslation, &phis)))
+          return llvm::OpenMPIRBuilder::InsertPointTy();
+        assert(phis.size() == 1);
+        result = phis[0];
+        return builder.saveIP();
+      };
+  return gen;
+}
+
+/// Create an OpenMPIRBuilder-compatible atomic reduction generator for the
+/// given reduction declaration. The generator uses `builder` but ignores its
+/// insertion point. Returns null if there is no atomic region available in the
+/// reduction declaration.
+static OwningAtomicReductionGen
+makeAtomicReductionGen(omp::ReductionDeclareOp decl,
+                       llvm::IRBuilderBase &builder,
+                       LLVM::ModuleTranslation &moduleTranslation) {
+  if (decl.atomicReductionRegion().empty())
+    return OwningAtomicReductionGen();
+
+  // The lambda is mutable because we need access to non-const methods of decl
+  // (which aren't actually mutating it), and we must capture decl by-value to
+  // avoid the dangling reference after the parent function returns.
+  OwningAtomicReductionGen atomicGen =
+      [&, decl](llvm::OpenMPIRBuilder::InsertPointTy insertPoint,
+                llvm::Value *lhs, llvm::Value *rhs) mutable {
+        Region &atomicRegion = decl.atomicReductionRegion();
+        moduleTranslation.mapValue(atomicRegion.front().getArgument(0), lhs);
+        moduleTranslation.mapValue(atomicRegion.front().getArgument(1), rhs);
+        builder.restoreIP(insertPoint);
+        SmallVector<llvm::Value *> phis;
+        if (failed(inlineConvertOmpRegions(atomicRegion,
+                                           "omp.reduction.atomic.body", builder,
+                                           moduleTranslation, &phis)))
+          return llvm::OpenMPIRBuilder::InsertPointTy();
+        assert(phis.empty());
+        return builder.saveIP();
+      };
+  return atomicGen;
+}
+
 /// Converts an OpenMP workshare loop into LLVM IR using OpenMPIRBuilder.
 static LogicalResult
 convertOmpWsLoop(Operation &opInst, llvm::IRBuilderBase &builder,
                  LLVM::ModuleTranslation &moduleTranslation) {
   auto loop = cast<omp::WsLoopOp>(opInst);
   // TODO: this should be in the op verifier instead.
   if (loop.lowerBound().empty())
     return failure();
 
   // Static is the default.
   omp::ClauseScheduleKind schedule = omp::ClauseScheduleKind::Static;
   if (loop.schedule_val().hasValue())
     schedule =
         *omp::symbolizeClauseScheduleKind(loop.schedule_val().getValue());
 
+  // Find the loop configuration.
+  llvm::Value *step = moduleTranslation.lookupValue(loop.step()[0]);
+  llvm::Type *ivType = step->getType();
+  llvm::Value *chunk =
+      loop.schedule_chunk_var()
+          ? moduleTranslation.lookupValue(loop.schedule_chunk_var())
+          : llvm::ConstantInt::get(ivType, 1);
+
+  SmallVector<omp::ReductionDeclareOp> reductionDecls;
+  collectReductionDecls(loop, reductionDecls);
+  llvm::OpenMPIRBuilder::InsertPointTy allocaIP =
+      findAllocaInsertPoint(builder, moduleTranslation);
+
+  // Allocate space for privatized reduction variables.
+  SmallVector<llvm::Value *> privateReductionVariables;
+  DenseMap<Value, llvm::Value *> reductionVariableMap;
+  unsigned numReductions = loop.getNumReductionVars();
+  privateReductionVariables.reserve(numReductions);
+  if (numReductions != 0) {
+    llvm::IRBuilderBase::InsertPointGuard guard(builder);
+    builder.restoreIP(allocaIP);
+    for (unsigned i = 0; i < numReductions; ++i) {
+      auto reductionType =
+          loop.reduction_vars()[i].getType().cast<LLVM::LLVMPointerType>();
+      llvm::Value *var = builder.CreateAlloca(
+          moduleTranslation.convertType(reductionType.getElementType()));
+      privateReductionVariables.push_back(var);
+      reductionVariableMap.try_emplace(loop.reduction_vars()[i], var);
+    }
+  }
+
+  // Store the mapping between reduction variables and their private copies on
+  // ModuleTranslation stack. It can be then recovered when translating
+  // omp.reduce operations in a separate call.
+  LLVM::ModuleTranslation::SaveStack<OpenMPVarMappingStackFrame> mappingGuard(
+      moduleTranslation, reductionVariableMap);
+
+  // Before the loop, store the initial values of reductions into reduction
+  // variables. Although this could be done after allocas, we don't want to mess
+  // up with the alloca insertion point.
+  for (unsigned i = 0; i < numReductions; ++i) {
+    SmallVector<llvm::Value *> phis;
+    if (failed(inlineConvertOmpRegions(reductionDecls[i].initializerRegion(),
+                                       "omp.reduction.neutral", builder,
+                                       moduleTranslation, &phis)))
+      return failure();
+    assert(phis.size() == 1 && "expected one value to be yielded from the "
+                               "reduction neutral element declaration region");
+    builder.CreateStore(phis[0], privateReductionVariables[i]);
+  }
+
   // Set up the source location value for OpenMP runtime.
   llvm::DISubprogram *subprogram =
       builder.GetInsertBlock()->getParent()->getSubprogram();
   const llvm::DILocation *diLoc =
       moduleTranslation.translateLoc(opInst.getLoc(), subprogram);
   llvm::OpenMPIRBuilder::LocationDescription ompLoc(builder.saveIP(),
                                                     llvm::DebugLoc(diLoc));
 
convertOmpWsLoop(Operation &opInst, llvm::IRBuilderBase &builder,
   }
 
   // Collapse loops. Store the insertion point because LoopInfos may get
   // invalidated.
   llvm::IRBuilderBase::InsertPoint afterIP = loopInfos.front()->getAfterIP();
   llvm::CanonicalLoopInfo *loopInfo =
       ompBuilder->collapseLoops(diLoc, loopInfos, {});
 
-  // Find the loop configuration.
-  llvm::Type *ivType = loopInfo->getIndVar()->getType();
-  llvm::Value *chunk =
-      loop.schedule_chunk_var()
-          ? moduleTranslation.lookupValue(loop.schedule_chunk_var())
-          : llvm::ConstantInt::get(ivType, 1);
-  llvm::OpenMPIRBuilder::InsertPointTy allocaIP =
-      findAllocaInsertPoint(builder, moduleTranslation);
+  allocaIP = findAllocaInsertPoint(builder, moduleTranslation);
   if (schedule == omp::ClauseScheduleKind::Static) {
     ompBuilder->applyStaticWorkshareLoop(ompLoc.DL, loopInfo, allocaIP,
                                          !loop.nowait(), chunk);
   } else {
     llvm::omp::OMPScheduleType schedType;
     switch (schedule) {
     case omp::ClauseScheduleKind::Dynamic:
       schedType = llvm::omp::OMPScheduleType::DynamicChunked;
ompBuilder->applyDynamicWorkshareLoop(ompLoc.DL, loopInfo, allocaIP,
                                           schedType, !loop.nowait(), chunk);
   }
 
   // Continue building IR after the loop. Note that the LoopInfo returned by
   // `collapseLoops` points inside the outermost loop and is intended for
   // potential further loop transformations. Use the insertion point stored
   // before collapsing loops instead.
   builder.restoreIP(afterIP);
+
+  // Process the reductions if required.
+  if (numReductions == 0)
+    return success();
+
+  // Create the reduction generators. We need to own them here because
+  // ReductionInfo only accepts references to the generators.
+  SmallVector<OwningReductionGen> owningReductionGens;
+  SmallVector<OwningAtomicReductionGen> owningAtomicReductionGens;
+  for (unsigned i = 0; i < numReductions; ++i) {
+    owningReductionGens.push_back(
+        makeReductionGen(reductionDecls[i], builder, moduleTranslation));
+    owningAtomicReductionGens.push_back(
+        makeAtomicReductionGen(reductionDecls[i], builder, moduleTranslation));
+  }
+
+  // Collect the reduction information.
+  SmallVector<llvm::OpenMPIRBuilder::ReductionInfo> reductionInfos;
+  reductionInfos.reserve(numReductions);
+  for (unsigned i = 0; i < numReductions; ++i) {
+    llvm::OpenMPIRBuilder::AtomicReductionGenTy atomicGen = nullptr;
+    if (owningAtomicReductionGens[i])
+      atomicGen = owningAtomicReductionGens[i];
+    reductionInfos.push_back(
+        {moduleTranslation.lookupValue(loop.reduction_vars()[i]),
+         privateReductionVariables[i], owningReductionGens[i], atomicGen});
+  }
+
+  // The call to createReductions below expects the block to have a
+  // terminator. Create an unreachable instruction to serve as terminator
+  // and remove it later.
+  llvm::UnreachableInst *tempTerminator = builder.CreateUnreachable();
+  builder.SetInsertPoint(tempTerminator);
+  llvm::OpenMPIRBuilder::InsertPointTy contInsertPoint =
+      moduleTranslation.getOpenMPBuilder()->createReductions(
+          builder.saveIP(), allocaIP, reductionInfos,
+          /*IsNoWait=*/false);
+  if (!contInsertPoint.getBlock())
+    return loop->emitOpError() << "failed to convert reductions";
+  auto nextInsertionPoint = moduleTranslation.getOpenMPBuilder()->createBarrier(
+      contInsertPoint, llvm::omp::OMPD_for);
+  tempTerminator->eraseFromParent();
+  builder.restoreIP(nextInsertionPoint);
+
+  return success();
+}
+
+/// Converts an OpenMP reduction operation using OpenMPIRBuilder. Expects the
+/// mapping between reduction variables and their private equivalents to have
+/// been stored on the ModuleTranslation stack. Currently only supports
+/// reduction within WsLoopOp, but can be easily extended.
+static LogicalResult
+convertOmpReductionOp(omp::ReductionOp reductionOp,
+                      llvm::IRBuilderBase &builder,
+                      LLVM::ModuleTranslation &moduleTranslation) {
+  // Find the declaration that corresponds to the reduction op.
+  auto reductionContainer = reductionOp->getParentOfType<omp::WsLoopOp>();
+  omp::ReductionDeclareOp declaration =
+      findReductionDecl(reductionContainer, reductionOp);
+  assert(declaration && "could not find reduction declaration");
+
+  // Retrieve the mapping between reduction variables and their private
+  // equivalents.
+  const DenseMap<Value, llvm::Value *> *reductionVariableMap = nullptr;
+  moduleTranslation.stackWalk<OpenMPVarMappingStackFrame>(
+      [&](const OpenMPVarMappingStackFrame &frame) {
+        reductionVariableMap = &frame.mapping;
+        return WalkResult::interrupt();
+      });
+  assert(reductionVariableMap && "couldn't find private reduction variables");
+
+  // Translate the reduction operation by emitting the body of the corresponding
+  // reduction declaration.
+  Region &reductionRegion = declaration.reductionRegion();
+  llvm::Value *privateReductionVar =
+      reductionVariableMap->lookup(reductionOp.accumulator());
+  llvm::Value *reductionVal = builder.CreateLoad(
+      moduleTranslation.convertType(reductionOp.operand().getType()),
+      privateReductionVar);
+
+  moduleTranslation.mapValue(reductionRegion.front().getArgument(0),
+                             reductionVal);
+  moduleTranslation.mapValue(
+      reductionRegion.front().getArgument(1),
+      moduleTranslation.lookupValue(reductionOp.operand()));
+
+  SmallVector<llvm::Value *> phis;
+  if (failed(inlineConvertOmpRegions(reductionRegion, "omp.reduction.body",
+                                     builder, moduleTranslation, &phis)))
+    return failure();
+  assert(phis.size() == 1 && "expected one value to be yielded from "
+                             "the reduction body declaration region");
+  builder.CreateStore(phis[0], privateReductionVar);
   return success();
 }
 
 namespace {
 
 /// Implementation of the dialect interface that converts operations belonging
 /// to the OpenMP dialect to LLVM IR.
 class OpenMPDialectLLVMIRTranslationInterface
return llvm::TypeSwitch<Operation *, LogicalResult>(op)
         // The argument list is discarded so that, flush with a list is treated
         // same as a flush without a list.
         ompBuilder->createFlush(builder.saveIP());
         return success();
       })
       .Case([&](omp::ParallelOp) {
         return convertOmpParallel(*op, builder, moduleTranslation);
       })
+      .Case([&](omp::ReductionOp reductionOp) {
+        return convertOmpReductionOp(reductionOp, builder, moduleTranslation);
+      })
       .Case([&](omp::MasterOp) {
         return convertOmpMaster(*op, builder, moduleTranslation);
       })
       .Case([&](omp::CriticalOp) {
         return convertOmpCritical(*op, builder, moduleTranslation);
       })
       .Case([&](omp::WsLoopOp) {
         return convertOmpWsLoop(*op, builder, moduleTranslation);
       })
-      .Case<omp::YieldOp, omp::TerminatorOp>([](auto op) {
-        // `yield` and `terminator` can be just omitted. The block structure was
-        // created in the function that handles their parent operation.
-        assert(op->getNumOperands() == 0 &&
-               "unexpected OpenMP terminator with operands");
+      .Case<omp::YieldOp, omp::TerminatorOp, omp::ReductionDeclareOp>(
+          [](auto op) {
+            // `yield` and `terminator` can be just omitted. The block structure
+            // was created in the region that handles their parent operation.
+            // `reduction.declare` will be used by reductions and is not
+            // converted directly, skip it.
             return success();
           })
       .Default([&](Operation *inst) {
         return inst->emitError("unsupported OpenMP operation: ")
                << inst->getName();
       });
 }
 
 void mlir::registerOpenMPDialectTranslation(DialectRegistry &registry) {
   registry.insert<omp::OpenMPDialect>();

mlir/lib/Target/LLVMIR/ModuleTranslation.cpp

ModuleTranslation::ModuleTranslation(Operation *module,
   assert(satisfiesLLVMModule(mlirModule) &&
          "mlirModule should honor LLVM's module semantics.");
 }
 ModuleTranslation::~ModuleTranslation() {
   if (ompBuilder)
     ompBuilder->finalize();
 }
 
+void ModuleTranslation::forgetMapping(Region &region) {
+  SmallVector<Region *> toProcess;
+  toProcess.push_back(&region);
+  while (!toProcess.empty()) {
+    Region *current = toProcess.pop_back_val();
+    for (Block &block : *current) {
+      blockMapping.erase(&block);
+      for (Value arg : block.getArguments())
+        valueMapping.erase(arg);
+      for (Operation &op : block) {
+        for (Value value : op.getResults())
+          valueMapping.erase(value);
+        if (op.hasSuccessors())
+          branchMapping.erase(&op);
+        if (isa<LLVM::GlobalOp>(op))
+          globalsMapping.erase(&op);
+        accessGroupMetadataMapping.erase(&op);
+        llvm::append_range(
+            toProcess,
+            llvm::map_range(op.getRegions(), [](Region &r) { return &r; }));
+      }
+    }
+  }
+}
+
 /// Get the SSA value passed to the current block from the terminator operation
 /// of its predecessor.
 static Value getPHISourceValue(Block *current, Block *pred,
                                unsigned numArguments, unsigned index) {
   Operation &terminator = *pred->getTerminator();
   if (isa<LLVM::BrOp>(terminator))
     return terminator.getOperand(index);
 

 
 LogicalResult ModuleTranslation::convertDialectAttributes(Operation *op) {
   for (NamedAttribute attribute : op->getDialectAttrs())
     if (failed(iface.amendOperation(op, attribute, *this)))
       return failure();
   return success();
 }
 
-/// Check whether the module contains only supported ops directly in its body.
-static LogicalResult checkSupportedModuleOps(Operation *m) {
-  for (Operation &o : getModuleBody(m).getOperations())
-    if (!isa<LLVM::LLVMFuncOp, LLVM::GlobalOp, LLVM::MetadataOp>(&o) &&
-        !o.hasTrait<OpTrait::IsTerminator>())
-      return o.emitOpError("unsupported module-level operation");
-  return success();
-}
-
 LogicalResult ModuleTranslation::convertFunctionSignatures() {
   // Declare all functions first because there may be function calls that form a
   // call graph with cycles, or global initializers that reference functions.
   for (auto function : getModuleBody(mlirModule).getOps<LLVMFuncOp>()) {
     llvm::FunctionCallee llvmFuncCst = llvmModule->getOrInsertFunction(
         function.getName(),
         cast<llvm::FunctionType>(convertType(function.getType())));
     llvm::Function *llvmFunc = cast<llvm::Function>(llvmFuncCst.getCallee());
     llvmFunc->setLinkage(convertLinkageToLLVM(function.linkage()));
if (accessGroups && !accessGroups.empty()) {
     inst->setMetadata(module->getMDKindID("llvm.access.group"), unionMD);
   }
 }
 
 llvm::Type *ModuleTranslation::convertType(Type type) {
   return typeTranslator.translateType(type);
 }
 
-/// A helper to look up remapped operands in the value remapping table.`
-SmallVector<llvm::Value *, 8>
-ModuleTranslation::lookupValues(ValueRange values) {
-  SmallVector<llvm::Value *, 8> remapped;
+/// A helper to look up remapped operands in the value remapping table.
+SmallVector<llvm::Value *> ModuleTranslation::lookupValues(ValueRange values) {
+  SmallVector<llvm::Value *> remapped;
   remapped.reserve(values.size());
   for (Value v : values)
     remapped.push_back(lookupValue(v));
   return remapped;
 }
 
 const llvm::DILocation *
 ModuleTranslation::translateLoc(Location loc, llvm::DILocalScope *scope) {
prepareLLVMModule(Operation *m, llvm::LLVMContext &llvmContext,
   return llvmModule;
 }
 
 std::unique_ptr<llvm::Module>
 mlir::translateModuleToLLVMIR(Operation *module, llvm::LLVMContext &llvmContext,
                               StringRef name) {
   if (!satisfiesLLVMModule(module))
     return nullptr;
-  if (failed(checkSupportedModuleOps(module)))
-    return nullptr;
   std::unique_ptr<llvm::Module> llvmModule =
       prepareLLVMModule(module, llvmContext, name);
 
   LLVM::ensureDistinctSuccessors(module);
 
   ModuleTranslation translator(module, std::move(llvmModule));
   if (failed(translator.convertFunctionSignatures()))
     return nullptr;
   if (failed(translator.convertGlobals()))
     return nullptr;
   if (failed(translator.createAccessGroupMetadata()))
     return nullptr;
   if (failed(translator.convertFunctions()))
     return nullptr;
+
+  // Convert other top-level operations if possible.
+  llvm::IRBuilder<> llvmBuilder(llvmContext);
+  for (Operation &o : getModuleBody(module).getOperations()) {
+    if (!isa<LLVM::LLVMFuncOp, LLVM::GlobalOp, LLVM::MetadataOp>(&o) &&
+        !o.hasTrait<OpTrait::IsTerminator>() &&
+        failed(translator.convertOperation(o, llvmBuilder))) {
+      return nullptr;
+    }
+  }
+
   if (llvm::verifyModule(*translator.llvmModule, &llvm::errs()))
     return nullptr;
 
   return std::move(translator.llvmModule);
 }

mlir/test/Target/LLVMIR/llvmir-invalid.mlir

 // RUN: mlir-translate -verify-diagnostics -split-input-file -mlir-to-llvmir %s
 
-// expected-error @+1 {{unsupported module-level operation}}
+// expected-error @+1 {{cannot be converted to LLVM IR}}
 func @foo() {
   llvm.return
 }
 
 // -----
 
 // expected-error @+1 {{llvm.noalias attribute attached to LLVM non-pointer argument}}
 llvm.func @invalid_noalias(%arg0 : f32 {llvm.noalias}) -> f32 {

mlir/test/Target/LLVMIR/openmp-reduction.mlir

+// RUN: mlir-translate -mlir-to-llvmir -split-input-file %s | FileCheck %s
+
+// Only check the overall shape of the code and the presence of relevant
+// runtime calls. Actual IR checking is done at the OpenMPIRBuilder level.
+
+omp.reduction.declare @add_f32 : f32
+init {
+^bb0(%arg: f32):
+  %0 = llvm.mlir.constant(0.0 : f32) : f32
+  omp.yield (%0 : f32)
+}
+combiner {
+^bb1(%arg0: f32, %arg1: f32):
+  %1 = llvm.fadd %arg0, %arg1 : f32
+  omp.yield (%1 : f32)
+}
+atomic {
+^bb2(%arg2: !llvm.ptr<f32>, %arg3: !llvm.ptr<f32>):
+  %2 = llvm.load %arg3 : !llvm.ptr<f32>
+  llvm.atomicrmw fadd %arg2, %2 monotonic : f32
+  omp.yield
+}
+
+// CHECK-LABEL: @simple_reduction
+llvm.func @simple_reduction(%lb : i64, %ub : i64, %step : i64) {
+  %c1 = llvm.mlir.constant(1 : i32) : i32
+  %0 = llvm.alloca %c1 x i32 : (i32) -> !llvm.ptr<f32>
+  omp.parallel {
+    omp.wsloop (%iv) : i64 = (%lb) to (%ub) step (%step)
+    reduction(@add_f32 -> %0 : !llvm.ptr<f32>) {
+      %1 = llvm.mlir.constant(2.0 : f32) : f32
+      omp.reduction %1, %0 : !llvm.ptr<f32>
+      omp.yield
+    }
+    omp.terminator
+  }
+  llvm.return
+}
+
+// Call to the outlined function.
+// CHECK: call void {{.*}} @__kmpc_fork_call
+// CHECK-SAME: @[[OUTLINED:[A-Za-z_.][A-Za-z0-9_.]*]]
+
+// Outlined function.
+// CHECK: define internal void @[[OUTLINED]]
+
+// Private reduction variable and its initialization.
+// CHECK: %[[PRIVATE:.+]] = alloca float
+// CHECK: store float 0.000000e+00, float* %[[PRIVATE]]
+
+// Call to the reduction function.
+// CHECK: call i32 @__kmpc_reduce
+// CHECK-SAME: @[[REDFUNC:[A-Za-z_.][A-Za-z0-9_.]*]]
+
+// Atomic reduction.
+// CHECK: %[[PARTIAL:.+]] = load float, float* %[[PRIVATE]]
+// CHECK: atomicrmw fadd float* %{{.*}}, float %[[PARTIAL]]
+
+// Non-atomic reduction:
+// CHECK: fadd float
+// CHECK: call void @__kmpc_end_reduce
+// CHECK: br label %[[FINALIZE:.+]]
+
+// CHECK: [[FINALIZE]]:
+// CHECK: call void @__kmpc_barrier
+
+// Update of the private variable using the reduction region
+// (the body block currently comes after all the other blocks).
+// CHECK: %[[PARTIAL:.+]] = load float, float* %[[PRIVATE]]
+// CHECK: %[[UPDATED:.+]] = fadd float %[[PARTIAL]], 2.000000e+00
+// CHECK: store float %[[UPDATED]], float* %[[PRIVATE]]
+
+// Reduction function.
+// CHECK: define internal void @[[REDFUNC]]
+// CHECK: fadd float
+
+// -----
+
+omp.reduction.declare @add_f32 : f32
+init {
+^bb0(%arg: f32):
+  %0 = llvm.mlir.constant(0.0 : f32) : f32
+  omp.yield (%0 : f32)
+}
+combiner {
+^bb1(%arg0: f32, %arg1: f32):
+  %1 = llvm.fadd %arg0, %arg1 : f32
+  omp.yield (%1 : f32)
+}
+atomic {
+^bb2(%arg2: !llvm.ptr<f32>, %arg3: !llvm.ptr<f32>):
+  %2 = llvm.load %arg3 : !llvm.ptr<f32>
+  llvm.atomicrmw fadd %arg2, %2 monotonic : f32
+  omp.yield
+}
+
+// When the same reduction declaration is used several times, its regions
+// are translated several times, which shouldn't lead to value/block
+// remapping assertions.
+// CHECK-LABEL: @reuse_declaration
+llvm.func @reuse_declaration(%lb : i64, %ub : i64, %step : i64) {
+  %c1 = llvm.mlir.constant(1 : i32) : i32
+  %0 = llvm.alloca %c1 x i32 : (i32) -> !llvm.ptr<f32>
+  %2 = llvm.alloca %c1 x i32 : (i32) -> !llvm.ptr<f32>
+  omp.parallel {
+    omp.wsloop (%iv) : i64 = (%lb) to (%ub) step (%step)
+    reduction(@add_f32 -> %0 : !llvm.ptr<f32>, @add_f32 -> %2 : !llvm.ptr<f32>) {
+      %1 = llvm.mlir.constant(2.0 : f32) : f32
+      omp.reduction %1, %0 : !llvm.ptr<f32>
+      omp.reduction %1, %2 : !llvm.ptr<f32>
+      omp.yield
+    }
+    omp.terminator
+  }
+  llvm.return
+}
+
+// Call to the outlined function.
+// CHECK: call void {{.*}} @__kmpc_fork_call
+// CHECK-SAME: @[[OUTLINED:[A-Za-z_.][A-Za-z0-9_.]*]]
+
+// Outlined function.
+// CHECK: define internal void @[[OUTLINED]]
+
+// Private reduction variable and its initialization.
+// CHECK: %[[PRIVATE1:.+]] = alloca float
+// CHECK: %[[PRIVATE2:.+]] = alloca float
+// CHECK: store float 0.000000e+00, float* %[[PRIVATE1]]
+// CHECK: store float 0.000000e+00, float* %[[PRIVATE2]]
+
+// Call to the reduction function.
+// CHECK: call i32 @__kmpc_reduce
+// CHECK-SAME: @[[REDFUNC:[A-Za-z_.][A-Za-z0-9_.]*]]
+
+// Atomic reduction.
+// CHECK: %[[PARTIAL1:.+]] = load float, float* %[[PRIVATE1]]
+// CHECK: atomicrmw fadd float* %{{.*}}, float %[[PARTIAL1]]
+// CHECK: %[[PARTIAL2:.+]] = load float, float* %[[PRIVATE2]]
+// CHECK: atomicrmw fadd float* %{{.*}}, float %[[PARTIAL2]]
+
+// Non-atomic reduction:
+// CHECK: fadd float
+// CHECK: fadd float
+// CHECK: call void @__kmpc_end_reduce
+// CHECK: br label %[[FINALIZE:.+]]
+
+// CHECK: [[FINALIZE]]:
+// CHECK: call void @__kmpc_barrier
+
+// Update of the private variable using the reduction region
+// (the body block currently comes after all the other blocks).
+// CHECK: %[[PARTIAL1:.+]] = load float, float* %[[PRIVATE1]]
+// CHECK: %[[UPDATED1:.+]] = fadd float %[[PARTIAL1]], 2.000000e+00
+// CHECK: store float %[[UPDATED1]], float* %[[PRIVATE1]]
+// CHECK: %[[PARTIAL2:.+]] = load float, float* %[[PRIVATE2]]
+// CHECK: %[[UPDATED2:.+]] = fadd float %[[PARTIAL2]], 2.000000e+00
+// CHECK: store float %[[UPDATED2]], float* %[[PRIVATE2]]
+
+// Reduction function.
+// CHECK: define internal void @[[REDFUNC]]
+// CHECK: fadd float
+// CHECK: fadd float
+
+
+// -----
+
+omp.reduction.declare @add_f32 : f32
+init {
+^bb0(%arg: f32):
+  %0 = llvm.mlir.constant(0.0 : f32) : f32
+  omp.yield (%0 : f32)
+}
+combiner {
+^bb1(%arg0: f32, %arg1: f32):
+  %1 = llvm.fadd %arg0, %arg1 : f32
+  omp.yield (%1 : f32)
+}
+atomic {
+^bb2(%arg2: !llvm.ptr<f32>, %arg3: !llvm.ptr<f32>):
+  %2 = llvm.load %arg3 : !llvm.ptr<f32>
+  llvm.atomicrmw fadd %arg2, %2 monotonic : f32
+  omp.yield
+}
+
+// It's okay not to reference the reduction variable in the body.
+// CHECK-LABEL: @missing_omp_reduction
+llvm.func @missing_omp_reduction(%lb : i64, %ub : i64, %step : i64) {
+  %c1 = llvm.mlir.constant(1 : i32) : i32
+  %0 = llvm.alloca %c1 x i32 : (i32) -> !llvm.ptr<f32>
+  %2 = llvm.alloca %c1 x i32 : (i32) -> !llvm.ptr<f32>
+  omp.parallel {
+    omp.wsloop (%iv) : i64 = (%lb) to (%ub) step (%step)
+    reduction(@add_f32 -> %0 : !llvm.ptr<f32>, @add_f32 -> %2 : !llvm.ptr<f32>) {
+      %1 = llvm.mlir.constant(2.0 : f32) : f32
+      omp.reduction %1, %0 : !llvm.ptr<f32>
+      omp.yield
+    }
+    omp.terminator
+  }
+  llvm.return
+}
+
+// Call to the outlined function.
+// CHECK: call void {{.*}} @__kmpc_fork_call
+// CHECK-SAME: @[[OUTLINED:[A-Za-z_.][A-Za-z0-9_.]*]]
+
+// Outlined function.
+// CHECK: define internal void @[[OUTLINED]]
+
+// Private reduction variable and its initialization.
+// CHECK: %[[PRIVATE1:.+]] = alloca float
+// CHECK: %[[PRIVATE2:.+]] = alloca float
+// CHECK: store float 0.000000e+00, float* %[[PRIVATE1]]
+// CHECK: store float 0.000000e+00, float* %[[PRIVATE2]]
+
+// Call to the reduction function.
+// CHECK: call i32 @__kmpc_reduce
+// CHECK-SAME: @[[REDFUNC:[A-Za-z_.][A-Za-z0-9_.]*]]
+
+// Atomic reduction.
+// CHECK: %[[PARTIAL1:.+]] = load float, float* %[[PRIVATE1]]
+// CHECK: atomicrmw fadd float* %{{.*}}, float %[[PARTIAL1]]
+// CHECK: %[[PARTIAL2:.+]] = load float, float* %[[PRIVATE2]]
+// CHECK: atomicrmw fadd float* %{{.*}}, float %[[PARTIAL2]]
+
+// Non-atomic reduction:
+// CHECK: fadd float
+// CHECK: fadd float
+// CHECK: call void @__kmpc_end_reduce
+// CHECK: br label %[[FINALIZE:.+]]
+
+// CHECK: [[FINALIZE]]:
+// CHECK: call void @__kmpc_barrier
+
+// Update of the private variable using the reduction region
+// (the body block currently comes after all the other blocks).
+// CHECK: %[[PARTIAL1:.+]] = load float, float* %[[PRIVATE1]]
+// CHECK: %[[UPDATED1:.+]] = fadd float %[[PARTIAL1]], 2.000000e+00
+// CHECK: store float %[[UPDATED1]], float* %[[PRIVATE1]]
+// CHECK-NOT: %{{.*}} = load float, float* %[[PRIVATE2]]
+// CHECK-NOT: %{{.*}} = fadd float %[[PARTIAL2]], 2.000000e+00
+
+// Reduction function.
+// CHECK: define internal void @[[REDFUNC]]
+// CHECK: fadd float
+// CHECK: fadd float
+
+// -----
+
+omp.reduction.declare @add_f32 : f32
+init {
+^bb0(%arg: f32):
+  %0 = llvm.mlir.constant(0.0 : f32) : f32
+  omp.yield (%0 : f32)
+}
+combiner {
+^bb1(%arg0: f32, %arg1: f32):
+  %1 = llvm.fadd %arg0, %arg1 : f32
+  omp.yield (%1 : f32)
+}
+atomic {
+^bb2(%arg2: !llvm.ptr<f32>, %arg3: !llvm.ptr<f32>):
+  %2 = llvm.load %arg3 : !llvm.ptr<f32>
+  llvm.atomicrmw fadd %arg2, %2 monotonic : f32
+  omp.yield
+}
+
+// It's okay to refer to the same reduction variable more than once in the
+// body.
+// CHECK-LABEL: @double_reference
+llvm.func @double_reference(%lb : i64, %ub : i64, %step : i64) {
+  %c1 = llvm.mlir.constant(1 : i32) : i32
+  %0 = llvm.alloca %c1 x i32 : (i32) -> !llvm.ptr<f32>
+  omp.parallel {
+    omp.wsloop (%iv) : i64 = (%lb) to (%ub) step (%step)
+    reduction(@add_f32 -> %0 : !llvm.ptr<f32>) {
+      %1 = llvm.mlir.constant(2.0 : f32) : f32
+      omp.reduction %1, %0 : !llvm.ptr<f32>
+      omp.reduction %1, %0 : !llvm.ptr<f32>
+      omp.yield
+    }
+    omp.terminator
+  }
+  llvm.return
+}
+
+// Call to the outlined function.
+// CHECK: call void {{.*}} @__kmpc_fork_call
+// CHECK-SAME: @[[OUTLINED:[A-Za-z_.][A-Za-z0-9_.]*]]
+
+// Outlined function.
+// CHECK: define internal void @[[OUTLINED]]
+
+// Private reduction variable and its initialization.
+// CHECK: %[[PRIVATE:.+]] = alloca float
+// CHECK: store float 0.000000e+00, float* %[[PRIVATE]]
+
+// Call to the reduction function.
+// CHECK: call i32 @__kmpc_reduce
+// CHECK-SAME: @[[REDFUNC:[A-Za-z_.][A-Za-z0-9_.]*]]
+
+// Atomic reduction.
+// CHECK: %[[PARTIAL:.+]] = load float, float* %[[PRIVATE]]
+// CHECK: atomicrmw fadd float* %{{.*}}, float %[[PARTIAL]]
+
+// Non-atomic reduction:
+// CHECK: fadd float
+// CHECK: call void @__kmpc_end_reduce
+// CHECK: br label %[[FINALIZE:.+]]
+
+// CHECK: [[FINALIZE]]:
+// CHECK: call void @__kmpc_barrier
+
+// Update of the private variable using the reduction region
+// (the body block currently comes after all the other blocks).
+// CHECK: %[[PARTIAL:.+]] = load float, float* %[[PRIVATE]]
+// CHECK: %[[UPDATED:.+]] = fadd float %[[PARTIAL]], 2.000000e+00
+// CHECK: store float %[[UPDATED]], float* %[[PRIVATE]]
+// CHECK: %[[PARTIAL:.+]] = load float, float* %[[PRIVATE]]
+// CHECK: %[[UPDATED:.+]] = fadd float %[[PARTIAL]], 2.000000e+00
+// CHECK: store float %[[UPDATED]], float* %[[PRIVATE]]
+
+// Reduction function.
+// CHECK: define internal void @[[REDFUNC]]
+// CHECK: fadd float
+
+// -----
+
+omp.reduction.declare @add_f32 : f32
+init {
+^bb0(%arg: f32):
+  %0 = llvm.mlir.constant(0.0 : f32) : f32
+  omp.yield (%0 : f32)
+}
+combiner {
+^bb1(%arg0: f32, %arg1: f32):
+  %1 = llvm.fadd %arg0, %arg1 : f32
+  omp.yield (%1 : f32)
+}
+atomic {
+^bb2(%arg2: !llvm.ptr<f32>, %arg3: !llvm.ptr<f32>):
+  %2 = llvm.load %arg3 : !llvm.ptr<f32>
+  llvm.atomicrmw fadd %arg2, %2 monotonic : f32
+  omp.yield
+}
+
+omp.reduction.declare @mul_f32 : f32
+init {
+^bb0(%arg: f32):
+  %0 = llvm.mlir.constant(1.0 : f32) : f32
+  omp.yield (%0 : f32)
+}
+combiner {
+^bb1(%arg0: f32, %arg1: f32):
+  %1 = llvm.fmul %arg0, %arg1 : f32
+  omp.yield (%1 : f32)
+}
+
+// CHECK-LABEL: @no_atomic
+llvm.func @no_atomic(%lb : i64, %ub : i64, %step : i64) {
+  %c1 = llvm.mlir.constant(1 : i32) : i32
+  %0 = llvm.alloca %c1 x i32 : (i32) -> !llvm.ptr<f32>
+  %2 = llvm.alloca %c1 x i32 : (i32) -> !llvm.ptr<f32>
+  omp.parallel {
+    omp.wsloop (%iv) : i64 = (%lb) to (%ub) step (%step)
+    reduction(@add_f32 -> %0 : !llvm.ptr<f32>, @mul_f32 -> %2 : !llvm.ptr<f32>) {
+      %1 = llvm.mlir.constant(2.0 : f32) : f32
+      omp.reduction %1, %0 : !llvm.ptr<f32>
+      omp.reduction %1, %2 : !llvm.ptr<f32>
+      omp.yield
+    }
+    omp.terminator
+  }
+  llvm.return
+}
+
+// Call to the outlined function.
+// CHECK: call void {{.*}} @__kmpc_fork_call
+// CHECK-SAME: @[[OUTLINED:[A-Za-z_.][A-Za-z0-9_.]*]]
+
+// Outlined function.
+// CHECK: define internal void @[[OUTLINED]]
+
+// Private reduction variable and its initialization.
+// CHECK: %[[PRIVATE1:.+]] = alloca float
+// CHECK: %[[PRIVATE2:.+]] = alloca float
+// CHECK: store float 0.000000e+00, float* %[[PRIVATE1]]
+// CHECK: store float 1.000000e+00, float* %[[PRIVATE2]]
+
+// Call to the reduction function.
+// CHECK: call i32 @__kmpc_reduce
+// CHECK-SAME: @[[REDFUNC:[A-Za-z_.][A-Za-z0-9_.]*]]
+
+// Atomic reduction not provided.
+// CHECK: unreachable
+
+// Non-atomic reduction:
+// CHECK: fadd float
+// CHECK: fmul float
+// CHECK: call void @__kmpc_end_reduce
+// CHECK: br label %[[FINALIZE:.+]]
+
+// CHECK: [[FINALIZE]]:
+// CHECK: call void @__kmpc_barrier
+
+// Update of the private variable using the reduction region
+// (the body block currently comes after all the other blocks).
+// CHECK: %[[PARTIAL1:.+]] = load float, float* %[[PRIVATE1]]
+// CHECK: %[[UPDATED1:.+]] = fadd float %[[PARTIAL1]], 2.000000e+00
+// CHECK: store float %[[UPDATED1]], float* %[[PRIVATE1]]
+// CHECK: %[[PARTIAL2:.+]] = load float, float* %[[PRIVATE2]]
+// CHECK: %[[UPDATED2:.+]] = fmul float %[[PARTIAL2]], 2.000000e+00
+// CHECK: store float %[[UPDATED2]], float* %[[PRIVATE2]]
+
+// Reduction function.
+// CHECK: define internal void @[[REDFUNC]]
+// CHECK: fadd float
+// CHECK: fmul float