[mlir][StandardToSPIRV] Add support for lowering trunci to SPIR-V to i1 types.

[hanchung]

Summary

Add a pattern to converting some value to a boolean. spirv.S/UConvert does not
work on i1 types. Thus, the pattern is lowered to cmpi + select.

[hanchung]

Remove a blank line in the test

[antiagainst]

Nice, thanks for fixing this!

mlir/lib/Conversion/StandardToSPIRV/StandardToSPIRV.cpp

536

It might not matter that much given we are using the same boolean type in standard and SPIR-V, but still we should move this line above the if statement at L525 here to make sure we are checking the converted dstType.

582

Same here.

[hanchung]

address comments

mlir/lib/Conversion/StandardToSPIRV/StandardToSPIRV.cpp

matchAndRewrite(ZeroExtendIOp op, ArrayRef<Value> operands,
     Value zero = spirv::ConstantOp::getZero(dstType, loc, rewriter);
     Value one = spirv::ConstantOp::getOne(dstType, loc, rewriter);
     rewriter.template replaceOpWithNewOp<spirv::SelectOp>(
         op, dstType, operands.front(), one, zero);
     return success();
   }
 };
 
+/// Converts std.trunci to spv.Select if the type of result is i1 or vector of
+/// i1.
+class TruncI1Pattern final : public OpConversionPattern<TruncateIOp> {
+public:
+  using OpConversionPattern<TruncateIOp>::OpConversionPattern;
+
+  LogicalResult
+  matchAndRewrite(TruncateIOp op, ArrayRef<Value> operands,
+                  ConversionPatternRewriter &rewriter) const override {
+    auto dstType = op.getResult().getType();
+    if (!isBoolScalarOrVector(dstType))
+      return failure();
+
+    Location loc = op.getLoc();
+    auto srcType = operands.front().getType();
+    // Check if (x & 1) == 1.
+    Value mask = spirv::ConstantOp::getOne(srcType, loc, rewriter);
+    Value maskedSrc =
+        rewriter.create<spirv::BitwiseAndOp>(loc, srcType, operands[0], mask);
+    Value isOne = rewriter.create<spirv::IEqualOp>(loc, maskedSrc, mask);
+
+    dstType = this->getTypeConverter()->convertType(dstType);
+    Value zero = spirv::ConstantOp::getZero(dstType, loc, rewriter);
+    Value one = spirv::ConstantOp::getOne(dstType, loc, rewriter);
+    rewriter.replaceOpWithNewOp<spirv::SelectOp>(op, dstType, isOne, one, zero);
+    return success();
+  }
+};
+
 /// Converts std.uitofp to spv.Select if the type of source is i1 or vector of
 /// i1.
 class UIToFPI1Pattern final : public OpConversionPattern<UIToFPOp> {
 public:
   using OpConversionPattern<UIToFPOp>::OpConversionPattern;
 
   LogicalResult
   matchAndRewrite(UIToFPOp op, ArrayRef<Value> operands,

 public:
   using OpConversionPattern<StdOp>::OpConversionPattern;
 
   LogicalResult
   matchAndRewrite(StdOp operation, ArrayRef<Value> operands,
                   ConversionPatternRewriter &rewriter) const override {
     assert(operands.size() == 1);
     auto srcType = operands.front().getType();
-    if (isBoolScalarOrVector(srcType))
+    auto dstType = operation.getResult().getType();
+    if (isBoolScalarOrVector(srcType) || isBoolScalarOrVector(dstType))
       return failure();
-    auto dstType =
-        this->getTypeConverter()->convertType(operation.getResult().getType());
+    dstType = this->getTypeConverter()->convertType(dstType);
     if (dstType == srcType) {
       // Due to type conversion, we are seeing the same source and target type.
       // Then we can just erase this operation by forwarding its operand.
       rewriter.replaceOp(operation, operands.front());
     } else {
       rewriter.template replaceOpWithNewOp<SPIRVOp>(operation, dstType,
                                                     operands);
     }
patterns.insert<
 
       // Memory patterns
       AllocOpPattern, DeallocOpPattern, IntLoadOpPattern, IntStoreOpPattern,
       LoadOpPattern, StoreOpPattern,
 
       ReturnOpPattern, SelectOpPattern,
 
       // Type cast patterns
-      UIToFPI1Pattern, ZeroExtendI1Pattern,
+      UIToFPI1Pattern, ZeroExtendI1Pattern, TruncI1Pattern,
       TypeCastingOpPattern<IndexCastOp, spirv::SConvertOp>,
       TypeCastingOpPattern<SIToFPOp, spirv::ConvertSToFOp>,
       TypeCastingOpPattern<UIToFPOp, spirv::ConvertUToFOp>,
       TypeCastingOpPattern<SignExtendIOp, spirv::SConvertOp>,
       TypeCastingOpPattern<ZeroExtendIOp, spirv::UConvertOp>,
       TypeCastingOpPattern<TruncateIOp, spirv::SConvertOp>,
       TypeCastingOpPattern<FPToSIOp, spirv::ConvertFToSOp>,
       TypeCastingOpPattern<FPExtOp, spirv::FConvertOp>,

mlir/test/Conversion/StandardToSPIRV/std-ops-to-spirv.mlir

 
 // CHECK-LABEL: @trunci2
 func @trunci2(%arg0: i32) -> i16 {
   // CHECK: spv.SConvert %{{.*}} : i32 to i16
   %0 = std.trunci %arg0 : i32 to i16
   return %0 : i16
 }
 
+// CHECK-LABEL: @trunc_to_i1
+func @trunc_to_i1(%arg0: i32) -> i1 {
+  // CHECK: %[[MASK:.*]] = spv.constant 1 : i32
+  // CHECK: %[[MASKED_SRC:.*]] = spv.BitwiseAnd %{{.*}}, %[[MASK]] : i32
+  // CHECK: %[[IS_ONE:.*]] = spv.IEqual %[[MASKED_SRC]], %[[MASK]] : i32
+  // CHECK-DAG: %[[TRUE:.*]] = spv.constant true
+  // CHECK-DAG: %[[FALSE:.*]] = spv.constant false
+  // CHECK: spv.Select %[[IS_ONE]], %[[TRUE]], %[[FALSE]] : i1, i1
+  %0 = std.trunci %arg0 : i32 to i1
+  return %0 : i1
+}
+
+// CHECK-LABEL: @trunc_to_veci1
+func @trunc_to_veci1(%arg0: vector<4xi32>) -> vector<4xi1> {
+  // CHECK: %[[MASK:.*]] = spv.constant dense<1> : vector<4xi32>
+  // CHECK: %[[MASKED_SRC:.*]] = spv.BitwiseAnd %{{.*}}, %[[MASK]] : vector<4xi32>
+  // CHECK: %[[IS_ONE:.*]] = spv.IEqual %[[MASKED_SRC]], %[[MASK]] : vector<4xi32>
+  // CHECK-DAG: %[[TRUE:.*]] = spv.constant dense<true> : vector<4xi1>
+  // CHECK-DAG: %[[FALSE:.*]] = spv.constant dense<false> : vector<4xi1>
+  // CHECK: spv.Select %[[IS_ONE]], %[[TRUE]], %[[FALSE]] : vector<4xi1>, vector<4xi1>
+
+  %0 = std.trunci %arg0 : vector<4xi32> to vector<4xi1>
+  return %0 : vector<4xi1>
+}
+
 // CHECK-LABEL: @fptosi1
 func @fptosi1(%arg0 : f32) -> i32 {
   // CHECK: spv.ConvertFToS %{{.*}} : f32 to i32
   %0 = std.fptosi %arg0 : f32 to i32
   return %0 : i32
 }
 
 // CHECK-LABEL: @fptosi2