[compiler-rt][X86][AMD][Bulldozer] Fix Bulldozer Model 2 detection.

[lebedev.ri]

Summary

The compiler-rt side of D46314

I have discovered an issue by accident.

$ lscpu 
Architecture:        x86_64
CPU op-mode(s):      32-bit, 64-bit
Byte Order:          Little Endian
CPU(s):              8
On-line CPU(s) list: 0-7
Thread(s) per core:  2
Core(s) per socket:  4
Socket(s):           1
NUMA node(s):        1
Vendor ID:           AuthenticAMD
CPU family:          21
Model:               2
Model name:          AMD FX(tm)-8350 Eight-Core Processor
Stepping:            0
CPU MHz:             3584.018
CPU max MHz:         4000.0000
CPU min MHz:         1400.0000
BogoMIPS:            8027.22
Virtualization:      AMD-V
L1d cache:           16K
L1i cache:           64K
L2 cache:            2048K
L3 cache:            8192K
NUMA node0 CPU(s):   0-7
Flags:               fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core perfctr_nb cpb hw_pstate vmmcall bmi1 arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold

So this is model-2 bulldozer AMD CPU.

GCC agrees:

$ echo | gcc -E - -march=native -###
<...>
 /usr/lib/gcc/x86_64-linux-gnu/7/cc1 -E -quiet -imultiarch x86_64-linux-gnu - "-march=bdver2" -mmmx -mno-3dnow -msse -msse2 -msse3 -mssse3 -msse4a -mcx16 -msahf -mno-movbe -maes -mno-sha -mpclmul -mpopcnt -mabm -mlwp -mfma -mfma4 -mxop -mbmi -mno-sgx -mno-bmi2 -mtbm -mavx -mno-avx2 -msse4.2 -msse4.1 -mlzcnt -mno-rtm -mno-hle -mno-rdrnd -mf16c -mno-fsgsbase -mno-rdseed -mprfchw -mno-adx -mfxsr -mxsave -mno-xsaveopt -mno-avx512f -mno-avx512er -mno-avx512cd -mno-avx512pf -mno-prefetchwt1 -mno-clflushopt -mno-xsavec -mno-xsaves -mno-avx512dq -mno-avx512bw -mno-avx512vl -mno-avx512ifma -mno-avx512vbmi -mno-avx5124fmaps -mno-avx5124vnniw -mno-clwb -mno-mwaitx -mno-clzero -mno-pku -mno-rdpid --param "l1-cache-size=16" --param "l1-cache-line-size=64" --param "l2-cache-size=2048" "-mtune=bdver2"
<...>

But clang does not: (look for bdver1)

$ echo | clang -E - -march=native -###
clang version 7.0.0- (trunk)
Target: x86_64-pc-linux-gnu
Thread model: posix
InstalledDir: /usr/local/bin
 "/usr/lib/llvm-7/bin/clang" "-cc1" "-triple" "x86_64-pc-linux-gnu" "-E" "-disable-free" "-disable-llvm-verifier" "-discard-value-names" "-main-file-name" "-" "-mrelocation-model" "static" "-mthread-model" "posix" "-mdisable-fp-elim" "-fmath-errno" "-masm-verbose" "-mconstructor-aliases" "-munwind-tables" "-fuse-init-array" "-target-cpu" "bdver1" "-target-feature" "+sse2" "-target-feature" "+cx16" "-target-feature" "+sahf" "-target-feature" "+tbm" "-target-feature" "-avx512ifma" "-target-feature" "-sha" "-target-feature" "-gfni" "-target-feature" "+fma4" "-target-feature" "-vpclmulqdq" "-target-feature" "+prfchw" "-target-feature" "-bmi2" "-target-feature" "-cldemote" "-target-feature" "-fsgsbase" "-target-feature" "-xsavec" "-target-feature" "+popcnt" "-target-feature" "+aes" "-target-feature" "-avx512bitalg" "-target-feature" "-xsaves" "-target-feature" "-avx512er" "-target-feature" "-avx512vnni" "-target-feature" "-avx512vpopcntdq" "-target-feature" "-clwb" "-target-feature" "-avx512f" "-target-feature" "-clzero" "-target-feature" "-pku" "-target-feature" "+mmx" "-target-feature" "+lwp" "-target-feature" "-rdpid" "-target-feature" "+xop" "-target-feature" "-rdseed" "-target-feature" "-waitpkg" "-target-feature" "-ibt" "-target-feature" "+sse4a" "-target-feature" "-avx512bw" "-target-feature" "-clflushopt" "-target-feature" "+xsave" "-target-feature" "-avx512vbmi2" "-target-feature" "-avx512vl" "-target-feature" "-avx512cd" "-target-feature" "+avx" "-target-feature" "-vaes" "-target-feature" "-rtm" "-target-feature" "+fma" "-target-feature" "+bmi" "-target-feature" "-rdrnd" "-target-feature" "-mwaitx" "-target-feature" "+sse4.1" "-target-feature" "+sse4.2" "-target-feature" "-avx2" "-target-feature" "-wbnoinvd" "-target-feature" "+sse" "-target-feature" "+lzcnt" "-target-feature" "+pclmul" "-target-feature" "-prefetchwt1" "-target-feature" "+f16c" "-target-feature" "+ssse3" "-target-feature" "-sgx" "-target-feature" "-shstk" "-target-feature" "+cmov" "-target-feature" "-avx512vbmi" "-target-feature" "-movbe" "-target-feature" "-xsaveopt" "-target-feature" "-avx512dq" "-target-feature" "-adx" "-target-feature" "-avx512pf" "-target-feature" "+sse3" "-dwarf-column-info" "-debugger-tuning=gdb" "-resource-dir" "/usr/lib/llvm-7/lib/clang/7.0.0" "-internal-isystem" "/usr/local/include" "-internal-isystem" "/usr/lib/llvm-7/lib/clang/7.0.0/include" "-internal-externc-isystem" "/usr/include/x86_64-linux-gnu" "-internal-externc-isystem" "/include" "-internal-externc-isystem" "/usr/include" "-fdebug-compilation-dir" "/build/llvm-build-Clang-release" "-ferror-limit" "19" "-fmessage-length" "271" "-fobjc-runtime=gcc" "-fdiagnostics-show-option" "-fcolor-diagnostics" "-o" "-" "-x" "c" "-"

So clang, unlike gcc, considers this to be bdver1.

After some digging, i've come across getAMDProcessorTypeAndSubtype() in Host.cpp.
I have added the following debug printf after the call to that function in sys::getHostCPUName():

errs() << "Family " << Family << " Model " << Model << " Type " << Type "\n";

Which produced:

Family 21 Model 2 Type 5

Which matches the lscpu output.

As it was pointed in the review by @craig.topper:

In D46314#1084123, @craig.topper wrote:

I dont' think this is right. Here is what I found on wikipedia. https://en.wikipedia.org/wiki/List_of_AMD_CPU_microarchitectures.

AMD Bulldozer Family 15h - the successor of 10h/K10. Bulldozer is designed for processors in the 10 to 220W category, implementing XOP, FMA4 and CVT16 instruction sets. Orochi was the first design which implemented it. For Bulldozer, CPUID model numbers are 00h and 01h.
AMD Piledriver Family 15h (2nd-gen) - successor to Bulldozer. CPUID model numbers are 02h (earliest "Vishera" Piledrivers) and 10h-1Fh.
AMD Steamroller Family 15h (3rd-gen) - third-generation Bulldozer derived core. CPUID model numbers are 30h-3Fh.
AMD Excavator Family 15h (4th-gen) - fourth-generation Bulldozer derived core. CPUID model numbers are 60h-6Fh, later updated revisions have model numbers 70h-7Fh.

So there's a weird exception where model 2 should go with 0x10-0x1f.

Though It does not help that the code can't be tested at the moment.
With this logical change, the bdver2 is properly detected.

$ echo | /build/llvm-build-Clang-release/bin/clang -E - -march=native -###
clang version 7.0.0 (trunk 331249) (llvm/trunk 331256)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /build/llvm-build-Clang-release/bin
 "/build/llvm-build-Clang-release/bin/clang-7" "-cc1" "-triple" "x86_64-unknown-linux-gnu" "-E" "-disable-free" "-main-file-name" "-" "-mrelocation-model" "static" "-mthread-model" "posix" "-mdisable-fp-elim" "-fmath-errno" "-masm-verbose" "-mconstructor-aliases" "-munwind-tables" "-fuse-init-array" "-target-cpu" "bdver2" "-target-feature" "+sse2" "-target-feature" "+cx16" "-target-feature" "+sahf" "-target-feature" "+tbm" "-target-feature" "-avx512ifma" "-target-feature" "-sha" "-target-feature" "-gfni" "-target-feature" "+fma4" "-target-feature" "-vpclmulqdq" "-target-feature" "+prfchw" "-target-feature" "-bmi2" "-target-feature" "-cldemote" "-target-feature" "-fsgsbase" "-target-feature" "-xsavec" "-target-feature" "+popcnt" "-target-feature" "+aes" "-target-feature" "-avx512bitalg" "-target-feature" "-movdiri" "-target-feature" "-xsaves" "-target-feature" "-avx512er" "-target-feature" "-avx512vnni" "-target-feature" "-avx512vpopcntdq" "-target-feature" "-clwb" "-target-feature" "-avx512f" "-target-feature" "-clzero" "-target-feature" "-pku" "-target-feature" "+mmx" "-target-feature" "+lwp" "-target-feature" "-rdpid" "-target-feature" "+xop" "-target-feature" "-rdseed" "-target-feature" "-waitpkg" "-target-feature" "-movdir64b" "-target-feature" "-ibt" "-target-feature" "+sse4a" "-target-feature" "-avx512bw" "-target-feature" "-clflushopt" "-target-feature" "+xsave" "-target-feature" "-avx512vbmi2" "-target-feature" "-avx512vl" "-target-feature" "-avx512cd" "-target-feature" "+avx" "-target-feature" "-vaes" "-target-feature" "-rtm" "-target-feature" "+fma" "-target-feature" "+bmi" "-target-feature" "-rdrnd" "-target-feature" "-mwaitx" "-target-feature" "+sse4.1" "-target-feature" "+sse4.2" "-target-feature" "-avx2" "-target-feature" "-wbnoinvd" "-target-feature" "+sse" "-target-feature" "+lzcnt" "-target-feature" "+pclmul" "-target-feature" "-prefetchwt1" "-target-feature" "+f16c" "-target-feature" "+ssse3" "-target-feature" "-sgx" "-target-feature" "-shstk" "-target-feature" "+cmov" "-target-feature" "-avx512vbmi" "-target-feature" "-movbe" "-target-feature" "-xsaveopt" "-target-feature" "-avx512dq" "-target-feature" "-adx" "-target-feature" "-avx512pf" "-target-feature" "+sse3" "-dwarf-column-info" "-debugger-tuning=gdb" "-resource-dir" "/build/llvm-build-Clang-release/lib/clang/7.0.0" "-internal-isystem" "/usr/local/include" "-internal-isystem" "/build/llvm-build-Clang-release/lib/clang/7.0.0/include" "-internal-externc-isystem" "/usr/include/x86_64-linux-gnu" "-internal-externc-isystem" "/include" "-internal-externc-isystem" "/usr/include" "-fdebug-compilation-dir" "/build/llvm-build-Clang-release" "-ferror-limit" "19" "-fmessage-length" "271" "-fobjc-runtime=gcc" "-fdiagnostics-show-option" "-fcolor-diagnostics" "-o" "-" "-x" "c" "-"

[craig.topper]

lib/builtins/cpu_model.c

421 ↗

(On Diff #144744)

Update the comment please.

[lebedev.ri]

Update comment, too.

[craig.topper]

LGTM

[lebedev.ri]

https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85591

compiler-rt/trunk/lib/builtins/cpu_model.c

case 21:
     if (Model >= 0x60 && Model <= 0x7f) {
       *Subtype = AMDFAM15H_BDVER4;
       break; // "bdver4"; 60h-7Fh: Excavator
     }
     if (Model >= 0x30 && Model <= 0x3f) {
       *Subtype = AMDFAM15H_BDVER3;
       break; // "bdver3"; 30h-3Fh: Steamroller
     }
-    if (Model >= 0x10 && Model <= 0x1f) {
+    if ((Model >= 0x10 && Model <= 0x1f) || Model == 0x02) {
       *Subtype = AMDFAM15H_BDVER2;
-      break; // "bdver2"; 10h-1Fh: Piledriver
+      break; // "bdver2"; 02h, 10h-1Fh: Piledriver
     }
     if (Model <= 0x0f) {
       *Subtype = AMDFAM15H_BDVER1;
       break; // "bdver1"; 00h-0Fh: Bulldozer
     }
     break;
   case 22:
     *Type = AMD_BTVER2;