[LV] Don't call recordVectorLoopValueForInductionCast for newly-created IV from a trunc.

[a.elovikov]

Summary

This method is supposed to be called for IVs that have casts in their use-def
chains that are completely ignored after vectorization under PSE. However, for
truncates of such IVs the same InductionDescriptor is used during
creation/widening of both original IV based on PHINode and new IV based on
TruncInst.

This leads to unintended second call to recordVectorLoopValueForInductionCast
with a VectorLoopVal set to the newly created IV for a trunc and causes an
assert due to attempt to store new information for already existing entry in the
map. This is wrong and should not be done.

Fixes PR35773.

[dim]

For me, this fixes both minimized test cases mentioned in PR35773, and the full test cases originating from https://bugs.freebsd.org/224867 and https://bugs.freebsd.org/224868.

[mssimpso]

Hi Dimitry,

This looks good to me, but it's probably a good idea to let Dorit have a look as well. Also, this should be a release blocker if it's not already. Thanks!

llvm/test/Transforms/LoopVectorize/pr35773.ll

34–36

Currently, every induction variable gets vectorized in some way, even though we may know that the vector version will not be needed. So even if we know the induction variable is uniform, as %main.iv is in this case, we will still vectorize it with broadcast/splats, knowing that InstCombine will simplify it all. The vectorizer relies on InstCombine for a lot of cleanup, actually. But I think we're to the point where we don't need to do this, since we can build up vector values on-demand if needed (this wasn't always the case). You can add "-instcombine" to your run line here if you'd rather just check the cleaner output. This is done in many test cases.

For the TODO, it's probably better to add something like that in the code for greater visibility, instead of in the test case. The relevant piece of code is the block at the end of widenIntOrFpInduction that begins with if (!VectorizedIV). This could be added as a separate patch I think.

[dim]

In D41913#973706, @mssimpso wrote:

This looks good to me, but it's probably a good idea to let Dorit have a look as well. Also, this should be a release blocker if it's not already. Thanks!

Yes, PR35773 is marked as release blocker, and blocks PR35804 (the 6.0.0 release meta-bug).

[a.elovikov]

In D41913#973706, @mssimpso wrote:

Also, this should be a release blocker if it's not already. Thanks!

Does it mean that I'll be required to commit the fix into some other branch after it lands to trunk?

llvm/test/Transforms/LoopVectorize/pr35773.ll

34–36

instcombine changes the output way too much, IMO. I'd rather keep the RUN line and checks as is because they describe what exactly the vectorizer is doing. I'll remove the "TODO" in such case.

Another possibility is to add "-instcombine" but don't run FileCheck at all - just verify that "opt" is not crashing. Not sure if that's common in the tests though.

[RKSimon]

In D41913#973824, @a.elovikov wrote:

In D41913#973706, @mssimpso wrote:

Also, this should be a release blocker if it's not already. Thanks!

Does it mean that I'll be required to commit the fix into some other branch after it lands to trunk?

No extra commit should be necessary. Once it's committed to trunk, make a note of the revision on the bugzilla in the "Fixed By Commit" field. PR35773 is already blocking 6.00 so if you don't resolve the ticket then the release team should see it and they can resolve it once they've merged.

[mssimpso]

llvm/test/Transforms/LoopVectorize/pr35773.ll

34–36

instcombine changes the output way too much, IMO. I'd rather keep the RUN line and checks as is because they describe what exactly the vectorizer is doing. I'll remove the "TODO" in such case.

Sounds good to me, but feel free to add a relevant TODO to the .cpp if you'd like. I'm pretty sure we can avoid generating these unneeded sequences, but probably no one has had the time or interest to look at that yet.

Another possibility is to add "-instcombine" but don't run FileCheck at all - just verify that "opt" is not crashing. Not sure if that's common in the tests though.

I'd prefer that we not do this. We should definitely check that were getting the expected output.

[a.elovikov]

• Move TODO from the test to the actual code.

[dorit]

LGTM. Thanks for the fix.

llvm/lib/Transforms/Vectorize/LoopVectorize.cpp

void InnerLoopVectorizer::createVectorIntOrFpInductionPHI(
 
   // We may need to add the step a number of times, depending on the unroll
   // factor. The last of those goes into the PHI.
   PHINode *VecInd = PHINode::Create(SteppedStart->getType(), 2, "vec.ind",
                                     &*LoopVectorBody->getFirstInsertionPt());
   Instruction *LastInduction = VecInd;
   for (unsigned Part = 0; Part < UF; ++Part) {
     VectorLoopValueMap.setVectorValue(EntryVal, Part, LastInduction);
-    recordVectorLoopValueForInductionCast(II, LastInduction, Part);
+
     if (isa<TruncInst>(EntryVal))
       addMetadata(LastInduction, EntryVal);
+    else
+      recordVectorLoopValueForInductionCast(II, LastInduction, Part);
+
     LastInduction = cast<Instruction>(addFastMathFlag(
         Builder.CreateBinOp(AddOp, LastInduction, SplatVF, "step.add")));
   }
 
   // Move the last step to the end of the latch block. This ensures consistent
   // placement of all induction updates.
   auto *LoopVectorLatch = LI->getLoopFor(LoopVectorBody)->getLoopLatch();
   auto *Br = cast<BranchInst>(LoopVectorLatch->getTerminator());
void InnerLoopVectorizer::widenIntOrFpInduction(PHINode *IV, TruncInst *Trunc) {
   // If we haven't yet vectorized the induction variable, splat the scalar
   // induction variable, and build the necessary step vectors.
   if (!VectorizedIV) {
     Value *Broadcasted = getBroadcastInstrs(ScalarIV);
     for (unsigned Part = 0; Part < UF; ++Part) {
       Value *EntryPart =
           getStepVector(Broadcasted, VF * Part, Step, ID.getInductionOpcode());
       VectorLoopValueMap.setVectorValue(EntryVal, Part, EntryPart);
-      recordVectorLoopValueForInductionCast(ID, EntryPart, Part);
       if (Trunc)
         addMetadata(EntryPart, Trunc);
+      else
+        recordVectorLoopValueForInductionCast(ID, EntryPart, Part);
     }
   }
 
   // If an induction variable is only used for counting loop iterations or
   // calculating addresses, it doesn't need to be widened. Create scalar steps
   // that can be used by instructions we will later scalarize. Note that the
   // addition of the scalar steps will not increase the number of instructions
   // in the loop in the common case prior to InstCombine. We will be trading

llvm/test/Transforms/LoopVectorize/pr35773.ll

+; RUN: opt -S -loop-vectorize -force-vector-width=4 -force-vector-interleave=1 < %s 2>&1 | FileCheck %s
+target datalayout = "e-m:e-i64:64-f80:128-n8:16:32:64-S128"
+@a = common local_unnamed_addr global i32 0, align 4
+@b = common local_unnamed_addr global i8 0, align 1
+
+; Function Attrs: norecurse nounwind uwtable
+define void @doit1() local_unnamed_addr{
+entry:
+  br label %for.body
+
+for.body:
+  %main.iv = phi i32 [ 0, %entry ], [ %inc, %for.body ]
+
+  %i8.iv = phi i8 [ 0, %entry ], [ %i8.add, %for.body ]
+  %i32.iv = phi i32 [ 0, %entry ], [ %i32.add, %for.body ]
+
+  %trunc.to.be.converted.to.new.iv = trunc i32 %i32.iv to i8
+  %i8.add = add i8 %i8.iv, %trunc.to.be.converted.to.new.iv
+
+  %noop.conv.under.pse = and i32 %i32.iv, 255
+  %i32.add = add nuw nsw i32 %noop.conv.under.pse, 9
+
+  %inc = add i32 %main.iv, 1
+  %tobool = icmp eq i32 %inc, 16
+  br i1 %tobool, label %for.cond.for.end_crit_edge, label %for.body
+
+; CHECK-LABEL: @doit1(
+; CHECK:       vector.body:
+; CHECK-NEXT:    [[MAIN_IV:%.*]] = phi i32 [ 0, [[VECTOR_PH:%.*]] ], [ [[MAIN_IV_NEXT:%.*]], [[VECTOR_BODY:%.*]] ]
+; CHECK-NEXT:    [[I8_IV:%.*]] = phi <4 x i8> [ zeroinitializer, [[VECTOR_PH]] ], [ [[I8_IV_NEXT:%.*]], [[VECTOR_BODY]] ]
+; CHECK-NEXT:    [[I32_IV:%.*]] = phi <4 x i32> [ <i32 0, i32 9, i32 18, i32 27>, [[VECTOR_PH]] ], [ [[I32_IV_NEXT:%.*]], [[VECTOR_BODY]] ]
+; CHECK-NEXT:    [[IV_FROM_TRUNC:%.*]] = phi <4 x i8> [ <i8 0, i8 9, i8 18, i8 27>, [[VECTOR_PH]] ], [ [[IV_FROM_TRUNC_NEXT:%.*]], [[VECTOR_BODY]] ]
+
+; TODO: Not sure why these are generated, but this is a test for a crash, so leave as a TODO:
+; CHECK-NEXT:    [[BROADCAST_SPLATINSERT:%.*]] = insertelement <4 x i32> undef, i32 [[MAIN_IV]], i32 0
+; CHECK-NEXT:    [[BROADCAST_SPLAT:%.*]] = shufflevector <4 x i32> [[BROADCAST_SPLATINSERT]], <4 x i32> undef, <4 x i32> zeroinitializer
+; CHECK-NEXT:    [[INDUCTION:%.*]] = add <4 x i32> [[BROADCAST_SPLAT]], <i32 0, i32 1, i32 2, i32 3>
+; CHECK-NEXT:    [[TMP7:%.*]] = add i32 [[MAIN_IV]], 0
+
+; CHECK-NEXT:    [[I8_IV_NEXT]] = add <4 x i8> [[I8_IV]], [[IV_FROM_TRUNC]]
+
+; CHECK-NEXT:    [[MAIN_IV_NEXT]] = add i32 [[MAIN_IV]], 4
+; CHECK-NEXT:    [[I32_IV_NEXT]] = add <4 x i32> [[I32_IV]], <i32 36, i32 36, i32 36, i32 36>
+; CHECK-NEXT:    [[IV_FROM_TRUNC_NEXT]] = add <4 x i8> [[IV_FROM_TRUNC]], <i8 36, i8 36, i8 36, i8 36>
+; CHECK-NEXT:    [[TMP9:%.*]] = icmp eq i32 [[MAIN_IV_NEXT]], 16
+; CHECK-NEXT:    br i1 [[TMP9]], label [[MIDDLE_BLOCK:%.*]], label [[VECTOR_BODY]], !llvm.loop !0
+
+for.cond.for.end_crit_edge:
+  store i8 %i8.add, i8* @b, align 1
+  br label %for.end
+
+for.end:
+  ret void
+}