[X86] Enable interleaved memory accesses by default

[mkuper]

Summary

Following r283480, we should, hopefully, have no regressions from this.
If you want to give this a spin with your workloads before I commit, let me know.

[mkuper]

test/Transforms/LoopVectorize/X86/interleaving.ll

1

Note that this test's only purpose is to verify that interleaved memory access is *turned on* for x86, it's not a test for interleaved memory access functionality.
The general functional test is Transforms/LoopVectorize/interleaved-accesses.ll

[RKSimon]

Any performance test gains/regressions?

[mkuper]

In D25350#566175, @RKSimon wrote:

Any performance test gains/regressions?

We've had performance gains on internal benchmarks. (And, anecdotally, a performance regression, which turned out to be a gain - we've started vectorizing a loop we were not vectorizing before, and really should have better performance when vectorized - but the dynamic loop count on that loop tends to be 1 or 2...)
As far as I know Intel also had performance gains on the benchmarks they run, but I'll let Ayal/Elena/Dorit speak for themselves.

As to public benchmarks - I don't have an up-to-date SPEC run with this unfortunately. I can run one if you want - unless Intel already happen to have the results handy?

Anyway, if you have internal benchmarks you want to run this on pre-commit, please do - codegen isn't necessarily happy with the shuffle sequences this generates. We've had some really bad regressions initially, which led to r283480. I don't expect any more big surprises, since the x86 cost model is still *really* conservative w.r.t interleaved memory accesses (teaching it to be more precise is a separate issue, and probably ties in with Farhana's work in D24681), but who knows.

[mkuper]

SPEC2006 looks flat.

[RKSimon]

We're seeing some minor but consistent regressions (< 1%) on some internal tests.

[mkuper]

In D25350#569327, @RKSimon wrote:

We're seeing some minor but consistent regressions (< 1%) on some internal tests.

That's really interesting - that means it's firing. :-)

Can you provide a reproducer? I can see basically three possible sources of regressions:

1. We're still doing very bad lowering for some shuffle sequences.
2. The cost model is too optimistic regarding the cost of the sequence, even with optimal lowering.
3. "Normal" vectorizer flakiness - the cost model is doing the right thing about the interleave sequence, but we shouldn't be vectorizing regardless. So without interleaving enabled we were just getting lucky.

I really hope what you're seeing is a case of (1).

[RKSimon]

In D25350#569385, @mkuper wrote:

In D25350#569327, @RKSimon wrote:

We're seeing some minor but consistent regressions (< 1%) on some internal tests.

That's really interesting - that means it's firing. :-)

Can you provide a reproducer? I can see basically three possible sources of regressions:

We're trying to drill down to the codegen diffs - its a large codebase and is putting up a fight.... The regression reduced when we enabled LTO and/or PGO.

[DavidKreitzer]

Hi Michael,

I thought the plan was to avoid interleaved vectorization when targeting Atom. Did that plan change or get handled in some other way?

[mkuper]

In D25350#569425, @DavidKreitzer wrote:

Hi Michael,

I thought the plan was to avoid interleaved vectorization when targeting Atom. Did that plan change or get handled in some other way?

No, this is my mistake, sorry about that.
I'll update the patch, thanks.

[mkuper]

Updated to disable this on Atom.
Intel are still looking into why they're getting regressions on Atom - for the same code that performs much better on Intel big cores.

[zansari]

Hi Michael,

We see a few eembc (mp2decode on SLM) and coremark regressions of the order of around 3-6%, and a couple of 3-6% geekbench (HSW) regression which we can follow up on.

In addition to this, we see significant (60%+) gains in denbench/rgb tests on HSW, which are nice.

Performance-wise, I think the change looks good to us.

I can give you (or anyone else) more specific on the gains/regressions if interested.

Thanks,
Zia.

[mkuper]

Thanks Zia!

As I've discussed with Ayal, the SLM-specific regressions should probably be looked at separately - but I'd appreciate more details on the HSW regressions.

Michael

[mkuper]

Simon, any news on your end?

[RKSimon]

In D25350#574974, @mkuper wrote:

Simon, any news on your end?

So looking through the before + after code we're seeing 2 types of diff:

1 - We've lost a number of cases where we had vectorized horizontal reduction clamp + sum patterns. These were typically loading 16 sparse integers as 4 x v4i32 in vpinsrd buildvector sequences and then performing the clamps (pminsd/pmaxsd) + hadd's. These are fully scalarized now.

2 - Where interleaving is kicking in it always uses 256-bit vector types, and the code spends a huge amount of time performing cross-lane shuffles (vextractf128/vinsertf128 etc.). This should be improvable in the backend with a mixture of more shuffle improvements (PR21281 and PR21138 come to mind) and also possibly splitting a ymm load into 2 if the only use of the load is to extract the low / high xmm subvectors.

[mkuper]

Thanks for investigating this, Simon!

In D25350#575481, @RKSimon wrote:

1 - We've lost a number of cases where we had vectorized horizontal reduction clamp + sum patterns. These were typically loading 16 sparse integers as 4 x v4i32 in vpinsrd buildvector sequences and then performing the clamps (pminsd/pmaxsd) + hadd's. These are fully scalarized now.

That seems fairly bad.
Do you have a reproducer? This didsn't seem to break our existing horizontal reduction lit tests.

2 - Where interleaving is kicking in it always uses 256-bit vector types, and the code spends a huge amount of time performing cross-lane shuffles (vextractf128/vinsertf128 etc.).

Is this AVX or AVX2? I mean, do we get this just because of having to perform integer ops on xmms, or is this just part of the resulting shuffle sequence?

This should be improvable in the backend with a mixture of more shuffle improvements (PR21281 and PR21138 come to mind)

It seems like PR21281 was mostly resolved. I'll need to look at PR21138.

and also possibly splitting a ymm load into 2 if the only use of the load is to extract the low / high xmm subvectors.

This is a bit weird - I'm not sure I'd expect this to fire in this kind of situation.

In any case, how do you think we can move forward with this? I'd really like to get this in (because of cases like the 60% improvement in denbench), but, obviously, with a minimum amount of regressions. :-)
If you can provide reproducers for the CG issues, I'll look into fixing them before enabling this. Otherwise, are you ok with this going on as is? If not, what's the alternative?

[RKSimon]

1 - We've lost a number of cases where we had vectorized horizontal reduction clamp + sum patterns. These were typically loading 16 sparse integers as 4 x v4i32 in vpinsrd buildvector sequences and then performing the clamps (pminsd/pmaxsd) + hadd's. These are fully scalarized now.

That seems fairly bad.
Do you have a reproducer? This didsn't seem to break our existing horizontal reduction lit tests.

We should be able to create one and address this as a follow up issue.

2 - Where interleaving is kicking in it always uses 256-bit vector types, and the code spends a huge amount of time performing cross-lane shuffles (vextractf128/vinsertf128 etc.).

Is this AVX or AVX2? I mean, do we get this just because of having to perform integer ops on xmms, or is this just part of the resulting shuffle sequence?

This is AVX1 on a Jaguar CPU - so internally its a 128-bit ALU that double pumps ymm instructions. It can be sensitive to large amounts of dependent ymm code like this.

This should be improvable in the backend with a mixture of more shuffle improvements (PR21281 and PR21138 come to mind)

It seems like PR21281 was mostly resolved. I'll need to look at PR21138.

I have a possible shuffle patch that cover both of these, but haven't had time to finish it - its a rewrite of lowerVectorShuffleByMerging128BitLanes that acts a bit like lowerShuffleAsRepeatedMaskAndLanePermute but in reverse (multiple input lane permute followed by repeated mask).

and also possibly splitting a ymm load into 2 if the only use of the load is to extract the low / high xmm subvectors.

This is a bit weird - I'm not sure I'd expect this to fire in this kind of situation.

Sorry, I meant such a change could fix the regression - and possibly allow a great deal more shuffle folding. It'll be a fine balance as to when to let it fire though.

In any case, how do you think we can move forward with this? I'd really like to get this in (because of cases like the 60% improvement in denbench), but, obviously, with a minimum amount of regressions. :-)
If you can provide reproducers for the CG issues, I'll look into fixing them before enabling this. Otherwise, are you ok with this going on as is? If not, what's the alternative?

Yes I think I'm happy for this to go ahead, the regression areas we can work on afterward, most can be solved during lowering and are existing issues - its just interleaving makes them a little more obvious!

[mkuper]

In D25350#575681, @RKSimon wrote:

1 - We've lost a number of cases where we had vectorized horizontal reduction clamp + sum patterns. These were typically loading 16 sparse integers as 4 x v4i32 in vpinsrd buildvector sequences and then performing the clamps (pminsd/pmaxsd) + hadd's. These are fully scalarized now.

That seems fairly bad.
Do you have a reproducer? This didsn't seem to break our existing horizontal reduction lit tests.

We should be able to create one and address this as a follow up issue.

Great, please CC me on the PR when you have one, I'll look into it.

This should be improvable in the backend with a mixture of more shuffle improvements (PR21281 and PR21138 come to mind)

It seems like PR21281 was mostly resolved. I'll need to look at PR21138.

I have a possible shuffle patch that cover both of these, but haven't had time to finish it - its a rewrite of lowerVectorShuffleByMerging128BitLanes that acts a bit like lowerShuffleAsRepeatedMaskAndLanePermute but in reverse (multiple input lane permute followed by repeated mask).

Sounds good, feel free to add me to the review.

and also possibly splitting a ymm load into 2 if the only use of the load is to extract the low / high xmm subvectors.

This is a bit weird - I'm not sure I'd expect this to fire in this kind of situation.

Sorry, I meant such a change could fix the regression - and possibly allow a great deal more shuffle folding. It'll be a fine balance as to when to let it fire though.

Sorry, I wasn't clear- I understood what you meant. I'm just confused about why we're producing this pattern.

In any case, how do you think we can move forward with this? I'd really like to get this in (because of cases like the 60% improvement in denbench), but, obviously, with a minimum amount of regressions. :-)
If you can provide reproducers for the CG issues, I'll look into fixing them before enabling this. Otherwise, are you ok with this going on as is? If not, what's the alternative?

Yes I think I'm happy for this to go ahead, the regression areas we can work on afterward, most can be solved during lowering and are existing issues - its just interleaving makes them a little more obvious!

Of course this doesn't introduce CG issues, it was just a question of which of the ones it exposes we "prefetch" vs. which ones we handle later. :)

Anyway, this sounds good to me, thanks a lot.
I'm going to push this in. If we see significant regressions coming from other people, I'm perfectly ok with reverting and reapplying after they're fixed.

[RKSimon]

LGTM

lib/Target/X86/X86TargetTransformInfo.h

public:
   int getIntImmCost(Intrinsic::ID IID, unsigned Idx, const APInt &Imm,
                     Type *Ty);
   bool isLegalMaskedLoad(Type *DataType);
   bool isLegalMaskedStore(Type *DataType);
   bool isLegalMaskedGather(Type *DataType);
   bool isLegalMaskedScatter(Type *DataType);
   bool areInlineCompatible(const Function *Caller,
                            const Function *Callee) const;
+
+  bool enableInterleavedAccessVectorization() { return true; }
 private:
   int getGSScalarCost(unsigned Opcode, Type *DataTy, bool VariableMask,
                       unsigned Alignment, unsigned AddressSpace);
   int getGSVectorCost(unsigned Opcode, Type *DataTy, Value *Ptr,
                       unsigned Alignment, unsigned AddressSpace);
 
   /// @}
 };
 
 } // end namespace llvm
 
 #endif

test/Transforms/LoopVectorize/X86/cost-model.ll

for:
   %indvars.iv = phi i64 [ 0, %preheader ], [ %indvars.iv.next, %for ]
   %s.02 = phi float [ 0.0, %preheader ], [ %add4, %for ]
   %arrayidx = getelementptr inbounds float, float* %a, i64 %indvars.iv
   %t1 = load float, float* %arrayidx, align 4
   %arrayidx3 = getelementptr inbounds float, float* %b, i64 %indvars.iv
   %t2 = load float, float* %arrayidx3, align 4
   %add = fadd fast float %t1, %s.02
   %add4 = fadd fast float %add, %t2
-  %indvars.iv.next = add nuw nsw i64 %indvars.iv, 8
+  %indvars.iv.next = add nuw nsw i64 %indvars.iv, 32
   %cmp1 = icmp slt i64 %indvars.iv.next, %t0
   br i1 %cmp1, label %for, label %loopexit
 
 loopexit:
   %add4.lcssa = phi float [ %add4, %for ]
   br label %for.end
 
 for.end:
   %s.0.lcssa = phi float [ 0.0, %entry ], [ %add4.lcssa, %loopexit ]
   ret float %s.0.lcssa
 }
 

test/Transforms/LoopVectorize/X86/gather_scatter.ll

 
 for.end:                                          ; preds = %for.cond
   ret void
 }
 
 ; The source code
 ;void foo2 (In * __restrict__ in, float * __restrict__ out, int * __restrict__ trigger) {
 ;
-;  for (int i=0; i<SIZE; ++i) {
+;  for (int i=0; i<SIZE; i += 16) {
 ;    if (trigger[i] > 0) {
 ;      out[i] = in[i].b + (float) 0.5;
 ;    }
 ;  }
 ;}
 
 %struct.In = type { float, float }
 
 ;AVX512-LABEL: @foo2
 ;AVX512: getelementptr inbounds %struct.In, %struct.In* %in, <16 x i64> {{.*}}, i32 1
 ;AVX512: llvm.masked.gather.v16f32
-;AVX512: llvm.masked.store.v16f32
+;AVX512: llvm.masked.scatter.v16f32
 ;AVX512: ret void
 define void @foo2(%struct.In* noalias %in, float* noalias %out, i32* noalias %trigger, i32* noalias %index) #0 {
 entry:
   %in.addr = alloca %struct.In*, align 8
   %out.addr = alloca float*, align 8
   %trigger.addr = alloca i32*, align 8
   %index.addr = alloca i32*, align 8
   %i = alloca i32, align 4
if.then:                                          ; preds = %for.body
   store float %add, float* %arrayidx5, align 4
   br label %if.end
 
 if.end:                                           ; preds = %if.then, %for.body
   br label %for.inc
 
 for.inc:                                          ; preds = %if.end
   %9 = load i32, i32* %i, align 4
-  %inc = add nsw i32 %9, 1
+  %inc = add nsw i32 %9, 16
   store i32 %inc, i32* %i, align 4
   br label %for.cond
 
 for.end:                                          ; preds = %for.cond
   ret void
 }
 
 ; The source code
 ;struct Out {
 ;  float a;
 ;  float b;
 ;};
 ;void foo3 (In * __restrict__ in, Out * __restrict__ out, int * __restrict__ trigger) {
 ;
-;  for (int i=0; i<SIZE; ++i) {
+;  for (int i=0; i<SIZE; i += 16) {
 ;    if (trigger[i] > 0) {
 ;      out[i].b = in[i].b + (float) 0.5;
 ;    }
 ;  }
 ;}
 
 ;AVX512-LABEL: @foo3
-;AVX512: getelementptr inbounds %struct.In, %struct.In* %in, <16 x i64> %{{.*}}, i32 1
+;AVX512: getelementptr inbounds %struct.In, %struct.In* %in, <16 x i64> {{.*}}, i32 1
 ;AVX512: llvm.masked.gather.v16f32
 ;AVX512: fadd <16 x float>
-;AVX512: getelementptr inbounds %struct.Out, %struct.Out* %out, <16 x i64> %{{.*}}, i32 1
+;AVX512: getelementptr inbounds %struct.Out, %struct.Out* %out, <16 x i64> {{.*}}, i32 1
 ;AVX512: llvm.masked.scatter.v16f32
 ;AVX512: ret void
 
 %struct.Out = type { float, float }
 
 define void @foo3(%struct.In* noalias %in, %struct.Out* noalias %out, i32* noalias %trigger) {
 entry:
   %in.addr = alloca %struct.In*, align 8
if.then:                                          ; preds = %for.body
   store float %add, float* %b6, align 4
   br label %if.end
 
 if.end:                                           ; preds = %if.then, %for.body
   br label %for.inc
 
 for.inc:                                          ; preds = %if.end
   %9 = load i32, i32* %i, align 4
-  %inc = add nsw i32 %9, 1
+  %inc = add nsw i32 %9, 16
   store i32 %inc, i32* %i, align 4
   br label %for.cond
 
 for.end:                                          ; preds = %for.cond
   ret void
 }
 declare void @llvm.masked.scatter.v16f32(<16 x float>, <16 x float*>, i32, <16 x i1>)

test/Transforms/LoopVectorize/X86/interleaving.ll

+; RUN: opt -S -mtriple=x86_64-pc_linux -loop-vectorize -instcombine < %s | FileCheck %s
+
+; CHECK-LABEL: foo
+; CHECK: %[[WIDE:.*]] = load <8 x i32>, <8 x i32>* %{{.*}}, align 4
+; CHECK: %[[STRIDED1:.*]] = shufflevector <8 x i32> %[[WIDE]], <8 x i32> undef, <4 x i32> <i32 0, i32 2, i32 4, i32 6>
+; CHECK: %[[STRIDED2:.*]] = shufflevector <8 x i32> %wide.vec, <8 x i32> undef, <4 x i32> <i32 1, i32 3, i32 5, i32 7>
+; CHECK: add nsw <4 x i32> %[[STRIDED2]], %[[STRIDED1]]
+
+define void @foo(i32* noalias nocapture %a, i32* noalias nocapture readonly %b) {
+entry:
+  br label %for.body
+
+for.cond.cleanup:                                 ; preds = %for.body
+  ret void
+
+for.body:                                         ; preds = %for.body, %entry
+  %indvars.iv = phi i64 [ 0, %entry ], [ %indvars.iv.next, %for.body ]
+  %0 = shl nsw i64 %indvars.iv, 1
+  %arrayidx = getelementptr inbounds i32, i32* %b, i64 %0
+  %1 = load i32, i32* %arrayidx, align 4
+  %2 = or i64 %0, 1
+  %arrayidx3 = getelementptr inbounds i32, i32* %b, i64 %2
+  %3 = load i32, i32* %arrayidx3, align 4
+  %add4 = add nsw i32 %3, %1
+  %arrayidx6 = getelementptr inbounds i32, i32* %a, i64 %indvars.iv
+  store i32 %add4, i32* %arrayidx6, align 4
+  %indvars.iv.next = add nuw nsw i64 %indvars.iv, 1
+  %exitcond = icmp eq i64 %indvars.iv.next, 1024
+  br i1 %exitcond, label %for.cond.cleanup, label %for.body
+}
+

test/Transforms/LoopVectorize/X86/masked_load_store.ll

 for.end:                                          ; preds = %for.cond
   ret void
 }
 
 ; The source code:
 ;
 ;void foo4(double *A, double *B, int *trigger) {
 ;
-;  for (int i=0; i<10000; i++) {
+;  for (int i=0; i<10000; i += 16) {
 ;    if (trigger[i] < 100) {
 ;          A[i] = B[i*2] + trigger[i]; << non-cosecutive access
 ;    }
 ;  }
 ;}
 
 ;AVX-LABEL: @foo4
 ;AVX-NOT: llvm.masked
if.then:                                          ; preds = %for.body
   store double %add, double* %arrayidx7, align 8
   br label %if.end
 
 if.end:                                           ; preds = %if.then, %for.body
   br label %for.inc
 
 for.inc:                                          ; preds = %if.end
   %12 = load i32, i32* %i, align 4
-  %inc = add nsw i32 %12, 1
+  %inc = add nsw i32 %12, 16
   store i32 %inc, i32* %i, align 4
   br label %for.cond
 
 for.end:                                          ; preds = %for.cond
   ret void
 }
 
 @a = common global [1 x i32*] zeroinitializer, align 8