This is an archive of the discontinued LLVM Phabricator instance.


				if (DOXYGEN_FOUND)
				if (LLVM_ENABLE_DOXYGEN)
				set(abs_srcdir ${CMAKE_CURRENT_SOURCE_DIR})
				set(abs_builddir ${CMAKE_CURRENT_BINARY_DIR})

				if (HAVE_DOT)
				set(DOT ${LLVM_PATH_DOT})
				endif()

				if (LLVM_DOXYGEN_EXTERNAL_SEARCH)
				set(enable_searchengine "YES")
				set(searchengine_url "${LLVM_DOXYGEN_SEARCHENGINE_URL}")
				set(enable_server_based_search "YES")
				set(enable_external_search "YES")
				set(extra_search_mappings "${LLVM_DOXYGEN_SEARCH_MAPPINGS}")
				else()
				set(enable_searchengine "NO")
				set(searchengine_url "")
				set(enable_server_based_search "NO")
				set(enable_external_search "NO")
				set(extra_search_mappings "")
				endif()

				# If asked, configure doxygen for the creation of a Qt Compressed Help file.
				if (LLVM_ENABLE_DOXYGEN_QT_HELP)
				set(OPENMP_DOXYGEN_QCH_FILENAME "org.llvm.openmp.qch" CACHE STRING
				"Filename of the Qt Compressed help file")
				set(OPENMP_DOXYGEN_QHP_NAMESPACE "org.llvm.openmp" CACHE STRING
				"Namespace under which the intermediate Qt Help Project file lives")
				set(OPENMP_DOXYGEN_QHP_CUST_FILTER_NAME "Clang ${OPENMP_VERSION}" CACHE STRING
				"See http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-filters")
				set(OPENMP_DOXYGEN_QHP_CUST_FILTER_ATTRS "Clang,${OPENMP_VERSION}" CACHE STRING
				"See http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes")
				set(openmp_doxygen_generate_qhp "YES")
				set(openmp_doxygen_qch_filename "${OPENMP_DOXYGEN_QCH_FILENAME}")
				set(openmp_doxygen_qhp_namespace "${OPENMP_DOXYGEN_QHP_NAMESPACE}")
				set(openmp_doxygen_qhelpgenerator_path "${LLVM_DOXYGEN_QHELPGENERATOR_PATH}")
				set(openmp_doxygen_qhp_cust_filter_name "${OPENMP_DOXYGEN_QHP_CUST_FILTER_NAME}")
				set(openmp_doxygen_qhp_cust_filter_attrs "${OPENMP_DOXYGEN_QHP_CUST_FILTER_ATTRS}")
				else()
				set(openmp_doxygen_generate_qhp "NO")
				set(openmp_doxygen_qch_filename "")
				set(openmp_doxygen_qhp_namespace "")
				set(openmp_doxygen_qhelpgenerator_path "")
				set(openmp_doxygen_qhp_cust_filter_name "")
				set(openmp_doxygen_qhp_cust_filter_attrs "")
				endif()

				option(LLVM_DOXYGEN_SVG
				"Use svg instead of png files for doxygen graphs." OFF)
				if (LLVM_DOXYGEN_SVG)
				set(DOT_IMAGE_FORMAT "svg")
				else()
				set(DOT_IMAGE_FORMAT "png")
				endif()

				configure_file(${CMAKE_CURRENT_SOURCE_DIR}/doxygen.cfg.in
				${CMAKE_CURRENT_BINARY_DIR}/doxygen.cfg @ONLY)

				set(abs_top_srcdir)
				set(abs_top_builddir)
				set(DOT)
				set(enable_searchengine)
				set(searchengine_url)
				set(enable_server_based_search)
				set(enable_external_search)
				set(extra_search_mappings)
				set(openmp_doxygen_generate_qhp)
				set(openmp_doxygen_qch_filename)
				set(openmp_doxygen_qhp_namespace)
				set(openmp_doxygen_qhelpgenerator_path)
				set(openmp_doxygen_qhp_cust_filter_name)
				set(openmp_doxygen_qhp_cust_filter_attrs)
				set(DOT_IMAGE_FORMAT)

				add_custom_target(doxygen-openmp
				COMMAND ${DOXYGEN_EXECUTABLE} ${CMAKE_CURRENT_BINARY_DIR}/doxygen.cfg
				WORKING_DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}
				COMMENT "Generating openmp doxygen documentation." VERBATIM)

				if (LLVM_BUILD_DOCS)
				add_dependencies(doxygen doxygen-openmp)
				endif()

				if (NOT LLVM_INSTALL_TOOLCHAIN_ONLY)
				install(DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/doxygen/html
				DESTINATION docs/html)
				endif()
				endif()
				endif()

	if (LLVM_ENABLE_SPHINX)			if (LLVM_ENABLE_SPHINX)
	include(AddSphinxTarget)			include(AddSphinxTarget)
	if (SPHINX_FOUND)			if (SPHINX_FOUND)
	if (${SPHINX_OUTPUT_HTML})			if (${SPHINX_OUTPUT_HTML})
	add_sphinx_target(html openmp)			add_sphinx_target(html openmp)
	endif()			endif()
	if (${SPHINX_OUTPUT_MAN})			if (${SPHINX_OUTPUT_MAN})
	add_sphinx_target(man openmp)			add_sphinx_target(man openmp)
	endif()			endif()
	endif()			endif()
	endif()			endif()

openmp/docs/doxygen-mainpage.dox

This file was added.

				/// \mainpage LLVM OpenMP
				///
				/// \section main_intro Introduction
				/// Welcome to the Clang/LLVM OpenMP project.

openmp/docs/doxygen.cfg.in

This file was added.

				# Doxyfile 1.8.6

				# This file describes the settings to be used by the documentation system
				# doxygen (www.doxygen.org) for a project.
				#
				# All text after a double hash (##) is considered a comment and is placed in
				# front of the TAG it is preceding.
				#
				# All text after a single hash (#) is considered a comment and will be ignored.
				# The format is:
				# TAG = value [value, ...]
				# For lists, items can also be appended using:
				# TAG += value [value, ...]
				# Values that contain spaces should be placed between quotes (\" \").

				#---------------------------------------------------------------------------
				# Project related configuration options
				#---------------------------------------------------------------------------

				# This tag specifies the encoding used for all characters in the config file
				# that follow. The default is UTF-8 which is also the encoding used for all text
				# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
				# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
				# for the list of possible encodings.
				# The default value is: UTF-8.

				DOXYFILE_ENCODING = UTF-8

				# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
				# double-quotes, unless you are using Doxywizard) that should identify the
				# project for which the documentation is generated. This name is used in the
				# title of most generated pages and in a few other places.
				# The default value is: My Project.

				PROJECT_NAME = "LLVM OpenMP"

				# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
				# could be handy for archiving the generated documentation or if some version
				# control system is used.

				PROJECT_NUMBER = @PACKAGE_VERSION@

				# Using the PROJECT_BRIEF tag one can provide an optional one line description
				# for a project that appears at the top of each page and should give viewer a
				# quick idea about the purpose of the project. Keep the description short.

				PROJECT_BRIEF =

				# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
				# the documentation. The maximum height of the logo should not exceed 55 pixels
				# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
				# to the output directory.

				PROJECT_LOGO =

				# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
				# into which the generated documentation will be written. If a relative path is
				# entered, it will be relative to the location where doxygen was started. If
				# left blank the current directory will be used.

				OUTPUT_DIRECTORY = @abs_builddir@/doxygen

				# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
				# directories (in 2 levels) under the output directory of each output format and
				# will distribute the generated files over these directories. Enabling this
				# option can be useful when feeding doxygen a huge amount of source files, where
				# putting all generated files in the same directory would otherwise causes
				# performance problems for the file system.
				# The default value is: NO.

				CREATE_SUBDIRS = NO

				# The OUTPUT_LANGUAGE tag is used to specify the language in which all
				# documentation generated by doxygen is written. Doxygen will use this
				# information to generate all constant output in the proper language.
				# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
				# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
				# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
				# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
				# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
				# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
				# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
				# Ukrainian and Vietnamese.
				# The default value is: English.

				OUTPUT_LANGUAGE = English

				# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
				# descriptions after the members that are listed in the file and class
				# documentation (similar to Javadoc). Set to NO to disable this.
				# The default value is: YES.

				BRIEF_MEMBER_DESC = YES

				# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
				# description of a member or function before the detailed description
				#
				# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
				# brief descriptions will be completely suppressed.
				# The default value is: YES.

				REPEAT_BRIEF = YES

				# This tag implements a quasi-intelligent brief description abbreviator that is
				# used to form the text in various listings. Each string in this list, if found
				# as the leading text of the brief description, will be stripped from the text
				# and the result, after processing the whole list, is used as the annotated
				# text. Otherwise, the brief description is used as-is. If left blank, the
				# following values are used ($name is automatically replaced with the name of
				# the entity):The $name class, The $name widget, The $name file, is, provides,
				# specifies, contains, represents, a, an and the.

				ABBREVIATE_BRIEF =

				# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
				# doxygen will generate a detailed section even if there is only a brief
				# description.
				# The default value is: NO.

				ALWAYS_DETAILED_SEC = NO

				# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
				# inherited members of a class in the documentation of that class as if those
				# members were ordinary class members. Constructors, destructors and assignment
				# operators of the base classes will not be shown.
				# The default value is: NO.

				INLINE_INHERITED_MEMB = NO

				# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
				# before files name in the file list and in the header files. If set to NO the
				# shortest path that makes the file name unique will be used
				# The default value is: YES.

				FULL_PATH_NAMES = YES

				# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
				# Stripping is only done if one of the specified strings matches the left-hand
				# part of the path. The tag can be used to show relative paths in the file list.
				# If left blank the directory from which doxygen is run is used as the path to
				# strip.
				#
				# Note that you can specify absolute paths here, but also relative paths, which
				# will be relative from the directory where doxygen is started.
				# This tag requires that the tag FULL_PATH_NAMES is set to YES.

				STRIP_FROM_PATH = @abs_srcdir@/..

				# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
				# path mentioned in the documentation of a class, which tells the reader which
				# header file to include in order to use a class. If left blank only the name of
				# the header file containing the class definition is used. Otherwise one should
				# specify the list of include paths that are normally passed to the compiler
				# using the -I flag.

				STRIP_FROM_INC_PATH = @abs_srcdir@/../include

				# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
				# less readable) file names. This can be useful is your file systems doesn't
				# support long names like on DOS, Mac, or CD-ROM.
				# The default value is: NO.

				SHORT_NAMES = NO

				# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
				# first line (until the first dot) of a Javadoc-style comment as the brief
				# description. If set to NO, the Javadoc-style will behave just like regular Qt-
				# style comments (thus requiring an explicit @brief command for a brief
				# description.)
				# The default value is: NO.

				JAVADOC_AUTOBRIEF = YES

				# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
				# line (until the first dot) of a Qt-style comment as the brief description. If
				# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
				# requiring an explicit command for a brief description.)
				# The default value is: NO.

				QT_AUTOBRIEF = YES

				# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
				# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
				# a brief description. This used to be the default behavior. The new default is
				# to treat a multi-line C++ comment block as a detailed description. Set this
				# tag to YES if you prefer the old behavior instead.
				#
				# Note that setting this tag to YES also means that rational rose comments are
				# not recognized any more.
				# The default value is: NO.

				MULTILINE_CPP_IS_BRIEF = NO

				# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
				# documentation from any documented member that it re-implements.
				# The default value is: YES.

				INHERIT_DOCS = YES

				# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
				# new page for each member. If set to NO, the documentation of a member will be
				# part of the file/class/namespace that contains it.
				# The default value is: NO.

				SEPARATE_MEMBER_PAGES = NO

				# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
				# uses this value to replace tabs by spaces in code fragments.
				# Minimum value: 1, maximum value: 16, default value: 4.

				TAB_SIZE = 2

				# This tag can be used to specify a number of aliases that act as commands in
				# the documentation. An alias has the form:
				# name=value
				# For example adding
				# "sideeffect=@par Side Effects:\n"
				# will allow you to put the command \sideeffect (or @sideeffect) in the
				# documentation, which will result in a user-defined paragraph with heading
				# "Side Effects:". You can put \n's in the value part of an alias to insert
				# newlines.

				ALIASES =

				# This tag can be used to specify a number of word-keyword mappings (TCL only).
				# A mapping has the form "name=value". For example adding "class=itcl::class"
				# will allow you to use the command class in the itcl::class meaning.

				TCL_SUBST =

				# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
				# only. Doxygen will then generate output that is more tailored for C. For
				# instance, some of the names that are used will be different. The list of all
				# members will be omitted, etc.
				# The default value is: NO.

				OPTIMIZE_OUTPUT_FOR_C = NO

				# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
				# Python sources only. Doxygen will then generate output that is more tailored
				# for that language. For instance, namespaces will be presented as packages,
				# qualified scopes will look different, etc.
				# The default value is: NO.

				OPTIMIZE_OUTPUT_JAVA = NO

				# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
				# sources. Doxygen will then generate output that is tailored for Fortran.
				# The default value is: NO.

				OPTIMIZE_FOR_FORTRAN = NO

				# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
				# sources. Doxygen will then generate output that is tailored for VHDL.
				# The default value is: NO.

				OPTIMIZE_OUTPUT_VHDL = NO

				# Doxygen selects the parser to use depending on the extension of the files it
				# parses. With this tag you can assign which parser to use for a given
				# extension. Doxygen has a built-in mapping, but you can override or extend it
				# using this tag. The format is ext=language, where ext is a file extension, and
				# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
				# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make
				# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
				# (default is Fortran), use: inc=Fortran f=C.
				#
				# Note For files without extension you can use no_extension as a placeholder.
				#
				# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
				# the files are not read by doxygen.

				EXTENSION_MAPPING =

				# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
				# according to the Markdown format, which allows for more readable
				# documentation. See http://daringfireball.net/projects/markdown/ for details.
				# The output of markdown processing is further processed by doxygen, so you can
				# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
				# case of backward compatibilities issues.
				# The default value is: YES.

				MARKDOWN_SUPPORT = YES

				# When enabled doxygen tries to link words that correspond to documented
				# classes, or namespaces to their corresponding documentation. Such a link can
				# be prevented in individual cases by putting a % sign in front of the word
				# or globally by setting AUTOLINK_SUPPORT to NO.
				# The default value is: YES.

				AUTOLINK_SUPPORT = YES

				# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
				# to include (a tag file for) the STL sources as input, then you should set this
				# tag to YES in order to let doxygen match functions declarations and
				# definitions whose arguments contain STL classes (e.g. func(std::string);
				# versus func(std::string) {}). This also make the inheritance and collaboration
				# diagrams that involve STL classes more complete and accurate.
				# The default value is: NO.

				BUILTIN_STL_SUPPORT = NO

				# If you use Microsoft's C++/CLI language, you should set this option to YES to
				# enable parsing support.
				# The default value is: NO.

				CPP_CLI_SUPPORT = NO

				# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
				# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
				# will parse them like normal C++ but will assume all classes use public instead
				# of private inheritance when no explicit protection keyword is present.
				# The default value is: NO.

				SIP_SUPPORT = NO

				# For Microsoft's IDL there are propget and propput attributes to indicate
				# getter and setter methods for a property. Setting this option to YES will make
				# doxygen to replace the get and set methods by a property in the documentation.
				# This will only work if the methods are indeed getting or setting a simple
				# type. If this is not the case, or you want to show the methods anyway, you
				# should set this option to NO.
				# The default value is: YES.

				IDL_PROPERTY_SUPPORT = YES

				# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
				# tag is set to YES, then doxygen will reuse the documentation of the first
				# member in the group (if any) for the other members of the group. By default
				# all members of a group must be documented explicitly.
				# The default value is: NO.

				DISTRIBUTE_GROUP_DOC = NO

				# Set the SUBGROUPING tag to YES to allow class member groups of the same type
				# (for instance a group of public functions) to be put as a subgroup of that
				# type (e.g. under the Public Functions section). Set it to NO to prevent
				# subgrouping. Alternatively, this can be done per class using the
				# \nosubgrouping command.
				# The default value is: YES.

				SUBGROUPING = YES

				# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
				# are shown inside the group in which they are included (e.g. using \ingroup)
				# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
				# and RTF).
				#
				# Note that this feature does not work in combination with
				# SEPARATE_MEMBER_PAGES.
				# The default value is: NO.

				INLINE_GROUPED_CLASSES = NO

				# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
				# with only public data fields or simple typedef fields will be shown inline in
				# the documentation of the scope in which they are defined (i.e. file,
				# namespace, or group documentation), provided this scope is documented. If set
				# to NO, structs, classes, and unions are shown on a separate page (for HTML and
				# Man pages) or section (for LaTeX and RTF).
				# The default value is: NO.

				INLINE_SIMPLE_STRUCTS = NO

				# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
				# enum is documented as struct, union, or enum with the name of the typedef. So
				# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
				# with name TypeT. When disabled the typedef will appear as a member of a file,
				# namespace, or class. And the struct will be named TypeS. This can typically be
				# useful for C code in case the coding convention dictates that all compound
				# types are typedef'ed and only the typedef is referenced, never the tag name.
				# The default value is: NO.

				TYPEDEF_HIDES_STRUCT = NO

				# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
				# cache is used to resolve symbols given their name and scope. Since this can be
				# an expensive process and often the same symbol appears multiple times in the
				# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
				# doxygen will become slower. If the cache is too large, memory is wasted. The
				# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
				# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
				# symbols. At the end of a run doxygen will report the cache usage and suggest
				# the optimal cache size from a speed point of view.
				# Minimum value: 0, maximum value: 9, default value: 0.

				LOOKUP_CACHE_SIZE = 3

				#---------------------------------------------------------------------------
				# Build related configuration options
				#---------------------------------------------------------------------------

				# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
				# documentation are documented, even if no documentation was available. Private
				# class members and static file members will be hidden unless the
				# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
				# Note: This will also disable the warnings about undocumented members that are
				# normally produced when WARNINGS is set to YES.
				# The default value is: NO.

				EXTRACT_ALL = YES

				# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
				# be included in the documentation.
				# The default value is: NO.

				EXTRACT_PRIVATE = NO

				# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
				# scope will be included in the documentation.
				# The default value is: NO.

				EXTRACT_PACKAGE = NO

				# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
				# included in the documentation.
				# The default value is: NO.

				EXTRACT_STATIC = YES

				# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
				# locally in source files will be included in the documentation. If set to NO
				# only classes defined in header files are included. Does not have any effect
				# for Java sources.
				# The default value is: YES.

				EXTRACT_LOCAL_CLASSES = YES

				# This flag is only useful for Objective-C code. When set to YES local methods,
				# which are defined in the implementation section but not in the interface are
				# included in the documentation. If set to NO only methods in the interface are
				# included.
				# The default value is: NO.

				EXTRACT_LOCAL_METHODS = NO

				# If this flag is set to YES, the members of anonymous namespaces will be
				# extracted and appear in the documentation as a namespace called
				# 'anonymous_namespace{file}', where file will be replaced with the base name of
				# the file that contains the anonymous namespace. By default anonymous namespace
				# are hidden.
				# The default value is: NO.

				EXTRACT_ANON_NSPACES = NO

				# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
				# undocumented members inside documented classes or files. If set to NO these
				# members will be included in the various overviews, but no documentation
				# section is generated. This option has no effect if EXTRACT_ALL is enabled.
				# The default value is: NO.

				HIDE_UNDOC_MEMBERS = NO

				# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
				# undocumented classes that are normally visible in the class hierarchy. If set
				# to NO these classes will be included in the various overviews. This option has
				# no effect if EXTRACT_ALL is enabled.
				# The default value is: NO.

				HIDE_UNDOC_CLASSES = NO

				# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
				# (class\|struct\|union) declarations. If set to NO these declarations will be
				# included in the documentation.
				# The default value is: NO.

				HIDE_FRIEND_COMPOUNDS = NO

				# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
				# documentation blocks found inside the body of a function. If set to NO these
				# blocks will be appended to the function's detailed documentation block.
				# The default value is: NO.

				HIDE_IN_BODY_DOCS = NO

				# The INTERNAL_DOCS tag determines if documentation that is typed after a
				# \internal command is included. If the tag is set to NO then the documentation
				# will be excluded. Set it to YES to include the internal documentation.
				# The default value is: NO.

				INTERNAL_DOCS = NO

				# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
				# names in lower-case letters. If set to YES upper-case letters are also
				# allowed. This is useful if you have classes or files whose names only differ
				# in case and if your file system supports case sensitive file names. Windows
				# and Mac users are advised to set this option to NO.
				# The default value is: system dependent.

				CASE_SENSE_NAMES = YES

				# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
				# their full class and namespace scopes in the documentation. If set to YES the
				# scope will be hidden.
				# The default value is: NO.

				HIDE_SCOPE_NAMES = NO

				# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
				# the files that are included by a file in the documentation of that file.
				# The default value is: YES.

				SHOW_INCLUDE_FILES = YES

				# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
				# grouped member an include statement to the documentation, telling the reader
				# which file to include in order to use the member.
				# The default value is: NO.

				SHOW_GROUPED_MEMB_INC = NO

				# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
				# files with double quotes in the documentation rather than with sharp brackets.
				# The default value is: NO.

				FORCE_LOCAL_INCLUDES = YES

				# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
				# documentation for inline members.
				# The default value is: YES.

				INLINE_INFO = YES

				# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
				# (detailed) documentation of file and class members alphabetically by member
				# name. If set to NO the members will appear in declaration order.
				# The default value is: YES.

				SORT_MEMBER_DOCS = YES

				# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
				# descriptions of file, namespace and class members alphabetically by member
				# name. If set to NO the members will appear in declaration order. Note that
				# this will also influence the order of the classes in the class list.
				# The default value is: NO.

				SORT_BRIEF_DOCS = NO

				# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
				# (brief and detailed) documentation of class members so that constructors and
				# destructors are listed first. If set to NO the constructors will appear in the
				# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
				# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
				# member documentation.
				# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
				# detailed member documentation.
				# The default value is: NO.

				SORT_MEMBERS_CTORS_1ST = NO

				# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
				# of group names into alphabetical order. If set to NO the group names will
				# appear in their defined order.
				# The default value is: NO.

				SORT_GROUP_NAMES = NO

				# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
				# fully-qualified names, including namespaces. If set to NO, the class list will
				# be sorted only by class name, not including the namespace part.
				# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
				# Note: This option applies only to the class list, not to the alphabetical
				# list.
				# The default value is: NO.

				SORT_BY_SCOPE_NAME = NO

				# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
				# type resolution of all parameters of a function it will reject a match between
				# the prototype and the implementation of a member function even if there is
				# only one candidate or it is obvious which candidate to choose by doing a
				# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
				# accept a match between prototype and implementation in such cases.
				# The default value is: NO.

				STRICT_PROTO_MATCHING = NO

				# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
				# todo list. This list is created by putting \todo commands in the
				# documentation.
				# The default value is: YES.

				GENERATE_TODOLIST = YES

				# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
				# test list. This list is created by putting \test commands in the
				# documentation.
				# The default value is: YES.

				GENERATE_TESTLIST = YES

				# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
				# list. This list is created by putting \bug commands in the documentation.
				# The default value is: YES.

				GENERATE_BUGLIST = YES

				# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
				# the deprecated list. This list is created by putting \deprecated commands in
				# the documentation.
				# The default value is: YES.

				GENERATE_DEPRECATEDLIST= YES

				# The ENABLED_SECTIONS tag can be used to enable conditional documentation
				# sections, marked by \if <section_label> ... \endif and \cond <section_label>
				# ... \endcond blocks.

				ENABLED_SECTIONS =

				# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
				# initial value of a variable or macro / define can have for it to appear in the
				# documentation. If the initializer consists of more lines than specified here
				# it will be hidden. Use a value of 0 to hide initializers completely. The
				# appearance of the value of individual variables and macros / defines can be
				# controlled using \showinitializer or \hideinitializer command in the
				# documentation regardless of this setting.
				# Minimum value: 0, maximum value: 10000, default value: 30.

				MAX_INITIALIZER_LINES = 30

				# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
				# the bottom of the documentation of classes and structs. If set to YES the list
				# will mention the files that were used to generate the documentation.
				# The default value is: YES.

				SHOW_USED_FILES = YES

				# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
				# will remove the Files entry from the Quick Index and from the Folder Tree View
				# (if specified).
				# The default value is: YES.

				SHOW_FILES = YES

				# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
				# page. This will remove the Namespaces entry from the Quick Index and from the
				# Folder Tree View (if specified).
				# The default value is: YES.

				SHOW_NAMESPACES = YES

				# The FILE_VERSION_FILTER tag can be used to specify a program or script that
				# doxygen should invoke to get the current version for each file (typically from
				# the version control system). Doxygen will invoke the program by executing (via
				# popen()) the command command input-file, where command is the value of the
				# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
				# by doxygen. Whatever the program writes to standard output is used as the file
				# version. For an example see the documentation.

				FILE_VERSION_FILTER =

				# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
				# by doxygen. The layout file controls the global structure of the generated
				# output files in an output format independent way. To create the layout file
				# that represents doxygen's defaults, run doxygen with the -l option. You can
				# optionally specify a file name after the option, if omitted DoxygenLayout.xml
				# will be used as the name of the layout file.
				#
				# Note that if you run doxygen from a directory containing a file called
				# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
				# tag is left empty.

				LAYOUT_FILE =

				# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
				# the reference definitions. This must be a list of .bib files. The .bib
				# extension is automatically appended if omitted. This requires the bibtex tool
				# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
				# For LaTeX the style of the bibliography can be controlled using
				# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
				# search path. Do not use file names with spaces, bibtex cannot handle them. See
				# also \cite for info how to create references.

				CITE_BIB_FILES =

				#---------------------------------------------------------------------------
				# Configuration options related to warning and progress messages
				#---------------------------------------------------------------------------

				# The QUIET tag can be used to turn on/off the messages that are generated to
				# standard output by doxygen. If QUIET is set to YES this implies that the
				# messages are off.
				# The default value is: NO.

				QUIET = NO

				# The WARNINGS tag can be used to turn on/off the warning messages that are
				# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
				# this implies that the warnings are on.
				#
				# Tip: Turn warnings on while writing the documentation.
				# The default value is: YES.

				WARNINGS = NO

				# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
				# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
				# will automatically be disabled.
				# The default value is: YES.

				WARN_IF_UNDOCUMENTED = NO

				# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
				# potential errors in the documentation, such as not documenting some parameters
				# in a documented function, or documenting parameters that don't exist or using
				# markup commands wrongly.
				# The default value is: YES.

				WARN_IF_DOC_ERROR = YES

				# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
				# are documented, but have no documentation for their parameters or return
				# value. If set to NO doxygen will only warn about wrong or incomplete parameter
				# documentation, but not about the absence of documentation.
				# The default value is: NO.

				WARN_NO_PARAMDOC = NO

				# The WARN_FORMAT tag determines the format of the warning messages that doxygen
				# can produce. The string should contain the $file, $line, and $text tags, which
				# will be replaced by the file and line number from which the warning originated
				# and the warning text. Optionally the format may contain $version, which will
				# be replaced by the version of the file (if it could be obtained via
				# FILE_VERSION_FILTER)
				# The default value is: $file:$line: $text.

				WARN_FORMAT = "$file:$line: $text"

				# The WARN_LOGFILE tag can be used to specify a file to which warning and error
				# messages should be written. If left blank the output is written to standard
				# error (stderr).

				WARN_LOGFILE =

				#---------------------------------------------------------------------------
				# Configuration options related to the input files
				#---------------------------------------------------------------------------

				# The INPUT tag is used to specify the files and/or directories that contain
				# documented source files. You may enter file names like myfile.cpp or
				# directories like /usr/src/myproject. Separate the files or directories with
				# spaces.
				# Note: If this tag is empty the current directory is searched.

				INPUT = @abs_srcdir@/../runtime \
				@abs_srcdir@/../libomptarget \
				@abs_srcdir@/../tools \
				@abs_srcdir@/doxygen-mainpage.dox

				# This tag can be used to specify the character encoding of the source files
				# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
				# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
				# documentation (see: http://www.gnu.org/software/libiconv) for the list of
				# possible encodings.
				# The default value is: UTF-8.

				INPUT_ENCODING = UTF-8

				# If the value of the INPUT tag contains directories, you can use the
				# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
				# *.h) to filter out the source-files in the directories. If left blank the
				# following patterns are tested:.c, .cc, .cxx, .cpp, .c++, .java, *.ii,
				# .ixx, .ipp, .i++, .inl, .idl, .ddl, .odl, .h, .hh, .hxx, *.hpp,
				# .h++, .cs, .d, .php, .php4, .php5, .phtml, .inc, .m, .markdown,
				# .md, .mm, .dox, .py, .f90, .f, .for, .tcl, .vhd, .vhdl, *.ucf,
				# .qsf, .as and *.js.

				FILE_PATTERNS =

				# The RECURSIVE tag can be used to specify whether or not subdirectories should
				# be searched for input files as well.
				# The default value is: NO.

				RECURSIVE = YES

				# The EXCLUDE tag can be used to specify files and/or directories that should be
				# excluded from the INPUT source files. This way you can easily exclude a
				# subdirectory from a directory tree whose root is specified with the INPUT tag.
				#
				# Note that relative paths are relative to the directory from which doxygen is
				# run.

				EXCLUDE =

				# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
				# directories that are symbolic links (a Unix file system feature) are excluded
				# from the input.
				# The default value is: NO.

				EXCLUDE_SYMLINKS = NO

				# If the value of the INPUT tag contains directories, you can use the
				# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
				# certain files from those directories.
				#
				# Note that the wildcards are matched against the file with absolute path, so to
				# exclude all test directories for example use the pattern /test/

				EXCLUDE_PATTERNS =

				# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
				# (namespaces, classes, functions, etc.) that should be excluded from the
				# output. The symbol name can be a fully qualified name, a word, or if the
				# wildcard * is used, a substring. Examples: ANamespace, AClass,
				# AClass::ANamespace, ANamespace::*Test
				#
				# Note that the wildcards are matched against the file with absolute path, so to
				# exclude all test directories use the pattern /test/

				EXCLUDE_SYMBOLS =

				# The EXAMPLE_PATH tag can be used to specify one or more files or directories
				# that contain example code fragments that are included (see the \include
				# command).

				EXAMPLE_PATH = @abs_srcdir@/../examples

				# If the value of the EXAMPLE_PATH tag contains directories, you can use the
				# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
				# *.h) to filter out the source-files in the directories. If left blank all
				# files are included.

				EXAMPLE_PATTERNS =

				# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
				# searched for input files to be used with the \include or \dontinclude commands
				# irrespective of the value of the RECURSIVE tag.
				# The default value is: NO.

				EXAMPLE_RECURSIVE = YES

				# The IMAGE_PATH tag can be used to specify one or more files or directories
				# that contain images that are to be included in the documentation (see the
				# \image command).

				IMAGE_PATH = @abs_srcdir@/img

				# The INPUT_FILTER tag can be used to specify a program that doxygen should
				# invoke to filter for each input file. Doxygen will invoke the filter program
				# by executing (via popen()) the command:
				#
				# <filter> <input-file>
				#
				# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
				# name of an input file. Doxygen will then use the output that the filter
				# program writes to standard output. If FILTER_PATTERNS is specified, this tag
				# will be ignored.
				#
				# Note that the filter must not add or remove lines; it is applied before the
				# code is scanned, but not when the output code is generated. If lines are added
				# or removed, the anchors will not be placed correctly.

				INPUT_FILTER =

				# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
				# basis. Doxygen will compare the file name with each pattern and apply the
				# filter if there is a match. The filters are a list of the form: pattern=filter
				# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
				# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
				# patterns match the file name, INPUT_FILTER is applied.

				FILTER_PATTERNS =

				# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
				# INPUT_FILTER ) will also be used to filter the input files that are used for
				# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
				# The default value is: NO.

				FILTER_SOURCE_FILES = NO

				# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
				# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
				# it is also possible to disable source filtering for a specific pattern using
				# *.ext= (so without naming a filter).
				# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.

				FILTER_SOURCE_PATTERNS =

				# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
				# is part of the input, its contents will be placed on the main page
				# (index.html). This can be useful if you have a project on for instance GitHub
				# and want to reuse the introduction page also for the doxygen output.

				USE_MDFILE_AS_MAINPAGE =

				#---------------------------------------------------------------------------
				# Configuration options related to source browsing
				#---------------------------------------------------------------------------

				# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
				# generated. Documented entities will be cross-referenced with these sources.
				#
				# Note: To get rid of all source code in the generated output, make sure that
				# also VERBATIM_HEADERS is set to NO.
				# The default value is: NO.

				SOURCE_BROWSER = YES

				# Setting the INLINE_SOURCES tag to YES will include the body of functions,
				# classes and enums directly into the documentation.
				# The default value is: NO.

				INLINE_SOURCES = NO

				# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
				# special comment blocks from generated source code fragments. Normal C, C++ and
				# Fortran comments will always remain visible.
				# The default value is: YES.

				STRIP_CODE_COMMENTS = NO

				# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
				# function all documented functions referencing it will be listed.
				# The default value is: NO.

				REFERENCED_BY_RELATION = YES

				# If the REFERENCES_RELATION tag is set to YES then for each documented function
				# all documented entities called/used by that function will be listed.
				# The default value is: NO.

				REFERENCES_RELATION = YES

				# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
				# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
				# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
				# link to the documentation.
				# The default value is: YES.

				REFERENCES_LINK_SOURCE = YES

				# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
				# source code will show a tooltip with additional information such as prototype,
				# brief description and links to the definition and documentation. Since this
				# will make the HTML file larger and loading of large files a bit slower, you
				# can opt to disable this feature.
				# The default value is: YES.
				# This tag requires that the tag SOURCE_BROWSER is set to YES.

				SOURCE_TOOLTIPS = YES

				# If the USE_HTAGS tag is set to YES then the references to source code will
				# point to the HTML generated by the htags(1) tool instead of doxygen built-in
				# source browser. The htags tool is part of GNU's global source tagging system
				# (see http://www.gnu.org/software/global/global.html). You will need version
				# 4.8.6 or higher.
				#
				# To use it do the following:
				# - Install the latest version of global
				# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
				# - Make sure the INPUT points to the root of the source tree
				# - Run doxygen as normal
				#
				# Doxygen will invoke htags (and that will in turn invoke gtags), so these
				# tools must be available from the command line (i.e. in the search path).
				#
				# The result: instead of the source browser generated by doxygen, the links to
				# source code will now point to the output of htags.
				# The default value is: NO.
				# This tag requires that the tag SOURCE_BROWSER is set to YES.

				USE_HTAGS = NO

				# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
				# verbatim copy of the header file for each class for which an include is
				# specified. Set to NO to disable this.
				# See also: Section \class.
				# The default value is: YES.

				VERBATIM_HEADERS = YES

				#---------------------------------------------------------------------------
				# Configuration options related to the alphabetical class index
				#---------------------------------------------------------------------------

				# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
				# compounds will be generated. Enable this if the project contains a lot of
				# classes, structs, unions or interfaces.
				# The default value is: YES.

				ALPHABETICAL_INDEX = YES

				# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
				# which the alphabetical index list will be split.
				# Minimum value: 1, maximum value: 20, default value: 5.
				# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.

				COLS_IN_ALPHA_INDEX = 4

				# In case all classes in a project start with a common prefix, all classes will
				# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
				# can be used to specify a prefix (or a list of prefixes) that should be ignored
				# while generating the index headers.
				# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.

				IGNORE_PREFIX = openmp::

				#---------------------------------------------------------------------------
				# Configuration options related to the HTML output
				#---------------------------------------------------------------------------

				# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
				# The default value is: YES.

				GENERATE_HTML = YES

				# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
				# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
				# it.
				# The default directory is: html.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				HTML_OUTPUT = html

				# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
				# generated HTML page (for example: .htm, .php, .asp).
				# The default value is: .html.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				HTML_FILE_EXTENSION = .html

				# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
				# each generated HTML page. If the tag is left blank doxygen will generate a
				# standard header.
				#
				# To get valid HTML the header file that includes any scripts and style sheets
				# that doxygen needs, which is dependent on the configuration options used (e.g.
				# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
				# default header using
				# doxygen -w html new_header.html new_footer.html new_stylesheet.css
				# YourConfigFile
				# and then modify the file new_header.html. See also section "Doxygen usage"
				# for information on how to generate the default header that doxygen normally
				# uses.
				# Note: The header is subject to change so you typically have to regenerate the
				# default header when upgrading to a newer version of doxygen. For a description
				# of the possible markers and block names see the documentation.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				HTML_HEADER =

				# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
				# generated HTML page. If the tag is left blank doxygen will generate a standard
				# footer. See HTML_HEADER for more information on how to generate a default
				# footer and what special commands can be used inside the footer. See also
				# section "Doxygen usage" for information on how to generate the default footer
				# that doxygen normally uses.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				HTML_FOOTER =

				# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
				# sheet that is used by each HTML page. It can be used to fine-tune the look of
				# the HTML output. If left blank doxygen will generate a default style sheet.
				# See also section "Doxygen usage" for information on how to generate the style
				# sheet that doxygen normally uses.
				# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
				# it is more robust and this tag (HTML_STYLESHEET) will in the future become
				# obsolete.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				HTML_STYLESHEET =

				# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional user-
				# defined cascading style sheet that is included after the standard style sheets
				# created by doxygen. Using this option one can overrule certain style aspects.
				# This is preferred over using HTML_STYLESHEET since it does not replace the
				# standard style sheet and is therefore more robust against future updates.
				# Doxygen will copy the style sheet file to the output directory. For an example
				# see the documentation.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				HTML_EXTRA_STYLESHEET =

				# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
				# other source files which should be copied to the HTML output directory. Note
				# that these files will be copied to the base HTML output directory. Use the
				# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
				# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
				# files will be copied as-is; there are no commands or markers available.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				HTML_EXTRA_FILES =

				# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
				# will adjust the colors in the stylesheet and background images according to
				# this color. Hue is specified as an angle on a colorwheel, see
				# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
				# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
				# purple, and 360 is red again.
				# Minimum value: 0, maximum value: 359, default value: 220.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				HTML_COLORSTYLE_HUE = 220

				# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
				# in the HTML output. For a value of 0 the output will use grayscales only. A
				# value of 255 will produce the most vivid colors.
				# Minimum value: 0, maximum value: 255, default value: 100.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				HTML_COLORSTYLE_SAT = 100

				# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
				# luminance component of the colors in the HTML output. Values below 100
				# gradually make the output lighter, whereas values above 100 make the output
				# darker. The value divided by 100 is the actual gamma applied, so 80 represents
				# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
				# change the gamma.
				# Minimum value: 40, maximum value: 240, default value: 80.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				HTML_COLORSTYLE_GAMMA = 80

				# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
				# page will contain the date and time when the page was generated. Setting this
				# to NO can help when comparing the output of multiple runs.
				# The default value is: YES.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				HTML_TIMESTAMP = YES

				# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
				# documentation will contain sections that can be hidden and shown after the
				# page has loaded.
				# The default value is: NO.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				HTML_DYNAMIC_SECTIONS = NO

				# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
				# shown in the various tree structured indices initially; the user can expand
				# and collapse entries dynamically later on. Doxygen will expand the tree to
				# such a level that at most the specified number of entries are visible (unless
				# a fully collapsed tree already exceeds this amount). So setting the number of
				# entries 1 will produce a full collapsed tree by default. 0 is a special value
				# representing an infinite number of entries and will result in a full expanded
				# tree by default.
				# Minimum value: 0, maximum value: 9999, default value: 100.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				HTML_INDEX_NUM_ENTRIES = 100

				# If the GENERATE_DOCSET tag is set to YES, additional index files will be
				# generated that can be used as input for Apple's Xcode 3 integrated development
				# environment (see: http://developer.apple.com/tools/xcode/), introduced with
				# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
				# Makefile in the HTML output directory. Running make will produce the docset in
				# that directory and running make install will install the docset in
				# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
				# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
				# for more information.
				# The default value is: NO.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				GENERATE_DOCSET = NO

				# This tag determines the name of the docset feed. A documentation feed provides
				# an umbrella under which multiple documentation sets from a single provider
				# (such as a company or product suite) can be grouped.
				# The default value is: Doxygen generated docs.
				# This tag requires that the tag GENERATE_DOCSET is set to YES.

				DOCSET_FEEDNAME = "Doxygen generated docs"

				# This tag specifies a string that should uniquely identify the documentation
				# set bundle. This should be a reverse domain-name style string, e.g.
				# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
				# The default value is: org.doxygen.Project.
				# This tag requires that the tag GENERATE_DOCSET is set to YES.

				DOCSET_BUNDLE_ID = org.doxygen.Project

				# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
				# the documentation publisher. This should be a reverse domain-name style
				# string, e.g. com.mycompany.MyDocSet.documentation.
				# The default value is: org.doxygen.Publisher.
				# This tag requires that the tag GENERATE_DOCSET is set to YES.

				DOCSET_PUBLISHER_ID = org.doxygen.Publisher

				# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
				# The default value is: Publisher.
				# This tag requires that the tag GENERATE_DOCSET is set to YES.

				DOCSET_PUBLISHER_NAME = Publisher

				# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
				# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
				# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
				# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
				# Windows.
				#
				# The HTML Help Workshop contains a compiler that can convert all HTML output
				# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
				# files are now used as the Windows 98 help format, and will replace the old
				# Windows help format (.hlp) on all Windows platforms in the future. Compressed
				# HTML files also contain an index, a table of contents, and you can search for
				# words in the documentation. The HTML workshop also contains a viewer for
				# compressed HTML files.
				# The default value is: NO.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				GENERATE_HTMLHELP = NO

				# The CHM_FILE tag can be used to specify the file name of the resulting .chm
				# file. You can add a path in front of the file if the result should not be
				# written to the html output directory.
				# This tag requires that the tag GENERATE_HTMLHELP is set to YES.

				CHM_FILE =

				# The HHC_LOCATION tag can be used to specify the location (absolute path
				# including file name) of the HTML help compiler ( hhc.exe). If non-empty
				# doxygen will try to run the HTML help compiler on the generated index.hhp.
				# The file has to be specified with full path.
				# This tag requires that the tag GENERATE_HTMLHELP is set to YES.

				HHC_LOCATION =

				# The GENERATE_CHI flag controls if a separate .chi index file is generated (
				# YES) or that it should be included in the master .chm file ( NO).
				# The default value is: NO.
				# This tag requires that the tag GENERATE_HTMLHELP is set to YES.

				GENERATE_CHI = NO

				# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
				# and project file content.
				# This tag requires that the tag GENERATE_HTMLHELP is set to YES.

				CHM_INDEX_ENCODING =

				# The BINARY_TOC flag controls whether a binary table of contents is generated (
				# YES) or a normal table of contents ( NO) in the .chm file.
				# The default value is: NO.
				# This tag requires that the tag GENERATE_HTMLHELP is set to YES.

				BINARY_TOC = NO

				# The TOC_EXPAND flag can be set to YES to add extra items for group members to
				# the table of contents of the HTML help documentation and to the tree view.
				# The default value is: NO.
				# This tag requires that the tag GENERATE_HTMLHELP is set to YES.

				TOC_EXPAND = NO

				# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
				# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
				# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
				# (.qch) of the generated HTML documentation.
				# The default value is: NO.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				GENERATE_QHP = @openmp_doxygen_generate_qhp@

				# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
				# the file name of the resulting .qch file. The path specified is relative to
				# the HTML output folder.
				# This tag requires that the tag GENERATE_QHP is set to YES.

				QCH_FILE = @openmp_doxygen_qch_filename@

				# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
				# Project output. For more information please see Qt Help Project / Namespace
				# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
				# The default value is: org.doxygen.Project.
				# This tag requires that the tag GENERATE_QHP is set to YES.

				QHP_NAMESPACE = @openmp_doxygen_qhp_namespace@

				# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
				# Help Project output. For more information please see Qt Help Project / Virtual
				# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
				# folders).
				# The default value is: doc.
				# This tag requires that the tag GENERATE_QHP is set to YES.

				QHP_VIRTUAL_FOLDER = doc

				# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
				# filter to add. For more information please see Qt Help Project / Custom
				# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
				# filters).
				# This tag requires that the tag GENERATE_QHP is set to YES.

				QHP_CUST_FILTER_NAME = @openmp_doxygen_qhp_cust_filter_name@

				# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
				# custom filter to add. For more information please see Qt Help Project / Custom
				# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
				# filters).
				# This tag requires that the tag GENERATE_QHP is set to YES.

				QHP_CUST_FILTER_ATTRS = @openmp_doxygen_qhp_cust_filter_attrs@

				# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
				# project's filter section matches. Qt Help Project / Filter Attributes (see:
				# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
				# This tag requires that the tag GENERATE_QHP is set to YES.

				QHP_SECT_FILTER_ATTRS =

				# The QHG_LOCATION tag can be used to specify the location of Qt's
				# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
				# generated .qhp file.
				# This tag requires that the tag GENERATE_QHP is set to YES.

				QHG_LOCATION = @openmp_doxygen_qhelpgenerator_path@

				# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
				# generated, together with the HTML files, they form an Eclipse help plugin. To
				# install this plugin and make it available under the help contents menu in
				# Eclipse, the contents of the directory containing the HTML and XML files needs
				# to be copied into the plugins directory of eclipse. The name of the directory
				# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
				# After copying Eclipse needs to be restarted before the help appears.
				# The default value is: NO.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				GENERATE_ECLIPSEHELP = NO

				# A unique identifier for the Eclipse help plugin. When installing the plugin
				# the directory name containing the HTML and XML files should also have this
				# name. Each documentation set should have its own identifier.
				# The default value is: org.doxygen.Project.
				# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.

				ECLIPSE_DOC_ID = org.doxygen.Project

				# If you want full control over the layout of the generated HTML pages it might
				# be necessary to disable the index and replace it with your own. The
				# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
				# of each HTML page. A value of NO enables the index and the value YES disables
				# it. Since the tabs in the index contain the same information as the navigation
				# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
				# The default value is: NO.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				DISABLE_INDEX = NO

				# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
				# structure should be generated to display hierarchical information. If the tag
				# value is set to YES, a side panel will be generated containing a tree-like
				# index structure (just like the one that is generated for HTML Help). For this
				# to work a browser that supports JavaScript, DHTML, CSS and frames is required
				# (i.e. any modern browser). Windows users are probably better off using the
				# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
				# further fine-tune the look of the index. As an example, the default style
				# sheet generated by doxygen has an example that shows how to put an image at
				# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
				# the same information as the tab index, you could consider setting
				# DISABLE_INDEX to YES when enabling this option.
				# The default value is: NO.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				GENERATE_TREEVIEW = NO

				# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
				# doxygen will group on one line in the generated HTML documentation.
				#
				# Note that a value of 0 will completely suppress the enum values from appearing
				# in the overview section.
				# Minimum value: 0, maximum value: 20, default value: 4.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				ENUM_VALUES_PER_LINE = 4

				# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
				# to set the initial width (in pixels) of the frame in which the tree is shown.
				# Minimum value: 0, maximum value: 1500, default value: 250.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				TREEVIEW_WIDTH = 250

				# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
				# external symbols imported via tag files in a separate window.
				# The default value is: NO.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				EXT_LINKS_IN_WINDOW = NO

				# Use this tag to change the font size of LaTeX formulas included as images in
				# the HTML documentation. When you change the font size after a successful
				# doxygen run you need to manually remove any form_*.png images from the HTML
				# output directory to force them to be regenerated.
				# Minimum value: 8, maximum value: 50, default value: 10.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				FORMULA_FONTSIZE = 10

				# Use the FORMULA_TRANPARENT tag to determine whether or not the images
				# generated for formulas are transparent PNGs. Transparent PNGs are not
				# supported properly for IE 6.0, but are supported on all modern browsers.
				#
				# Note that when changing this option you need to delete any form_*.png files in
				# the HTML output directory before the changes have effect.
				# The default value is: YES.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				FORMULA_TRANSPARENT = YES

				# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
				# http://www.mathjax.org) which uses client side Javascript for the rendering
				# instead of using prerendered bitmaps. Use this if you do not have LaTeX
				# installed or if you want to formulas look prettier in the HTML output. When
				# enabled you may also need to install MathJax separately and configure the path
				# to it using the MATHJAX_RELPATH option.
				# The default value is: NO.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				USE_MATHJAX = NO

				# When MathJax is enabled you can set the default output format to be used for
				# the MathJax output. See the MathJax site (see:
				# http://docs.mathjax.org/en/latest/output.html) for more details.
				# Possible values are: HTML-CSS (which is slower, but has the best
				# compatibility), NativeMML (i.e. MathML) and SVG.
				# The default value is: HTML-CSS.
				# This tag requires that the tag USE_MATHJAX is set to YES.

				MATHJAX_FORMAT = HTML-CSS

				# When MathJax is enabled you need to specify the location relative to the HTML
				# output directory using the MATHJAX_RELPATH option. The destination directory
				# should contain the MathJax.js script. For instance, if the mathjax directory
				# is located at the same level as the HTML output directory, then
				# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
				# Content Delivery Network so you can quickly see the result without installing
				# MathJax. However, it is strongly recommended to install a local copy of
				# MathJax from http://www.mathjax.org before deployment.
				# The default value is: http://cdn.mathjax.org/mathjax/latest.
				# This tag requires that the tag USE_MATHJAX is set to YES.

				MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest

				# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
				# extension names that should be enabled during MathJax rendering. For example
				# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
				# This tag requires that the tag USE_MATHJAX is set to YES.

				MATHJAX_EXTENSIONS =

				# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
				# of code that will be used on startup of the MathJax code. See the MathJax site
				# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
				# example see the documentation.
				# This tag requires that the tag USE_MATHJAX is set to YES.

				MATHJAX_CODEFILE =

				# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
				# the HTML output. The underlying search engine uses javascript and DHTML and
				# should work on any modern browser. Note that when using HTML help
				# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
				# there is already a search function so this one should typically be disabled.
				# For large projects the javascript based search engine can be slow, then
				# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
				# search using the keyboard; to jump to the search box use <access key> + S
				# (what the <access key> is depends on the OS and browser, but it is typically
				# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
				# key> to jump into the search results window, the results can be navigated
				# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
				# the search. The filter options can be selected when the cursor is inside the
				# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
				# to select a filter and <Enter> or <escape> to activate or cancel the filter
				# option.
				# The default value is: YES.
				# This tag requires that the tag GENERATE_HTML is set to YES.

				SEARCHENGINE = @enable_searchengine@

				# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
				# implemented using a web server instead of a web client using Javascript. There
				# are two flavours of web server based searching depending on the
				# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for
				# searching and an index file used by the script. When EXTERNAL_SEARCH is
				# enabled the indexing and searching needs to be provided by external tools. See
				# the section "External Indexing and Searching" for details.
				# The default value is: NO.
				# This tag requires that the tag SEARCHENGINE is set to YES.

				SERVER_BASED_SEARCH = @enable_server_based_search@

				# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
				# script for searching. Instead the search results are written to an XML file
				# which needs to be processed by an external indexer. Doxygen will invoke an
				# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
				# search results.
				#
				# Doxygen ships with an example indexer ( doxyindexer) and search engine
				# (doxysearch.cgi) which are based on the open source search engine library
				# Xapian (see: http://xapian.org/).
				#
				# See the section "External Indexing and Searching" for details.
				# The default value is: NO.
				# This tag requires that the tag SEARCHENGINE is set to YES.

				EXTERNAL_SEARCH = @enable_external_search@

				# The SEARCHENGINE_URL should point to a search engine hosted by a web server
				# which will return the search results when EXTERNAL_SEARCH is enabled.
				#
				# Doxygen ships with an example indexer ( doxyindexer) and search engine
				# (doxysearch.cgi) which are based on the open source search engine library
				# Xapian (see: http://xapian.org/). See the section "External Indexing and
				# Searching" for details.
				# This tag requires that the tag SEARCHENGINE is set to YES.

				SEARCHENGINE_URL = @searchengine_url@

				# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
				# search data is written to a file for indexing by an external tool. With the
				# SEARCHDATA_FILE tag the name of this file can be specified.
				# The default file is: searchdata.xml.
				# This tag requires that the tag SEARCHENGINE is set to YES.

				SEARCHDATA_FILE = searchdata.xml

				# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
				# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
				# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
				# projects and redirect the results back to the right project.
				# This tag requires that the tag SEARCHENGINE is set to YES.

				EXTERNAL_SEARCH_ID = openmp

				# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
				# projects other than the one defined by this configuration file, but that are
				# all added to the same external search index. Each project needs to have a
				# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
				# to a relative location where the documentation can be found. The format is:
				# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
				# This tag requires that the tag SEARCHENGINE is set to YES.

				EXTRA_SEARCH_MAPPINGS = @extra_search_mappings@

				#---------------------------------------------------------------------------
				# Configuration options related to the LaTeX output
				#---------------------------------------------------------------------------

				# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
				# The default value is: YES.

				GENERATE_LATEX = NO

				# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
				# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
				# it.
				# The default directory is: latex.
				# This tag requires that the tag GENERATE_LATEX is set to YES.

				LATEX_OUTPUT = latex

				# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
				# invoked.
				#
				# Note that when enabling USE_PDFLATEX this option is only used for generating
				# bitmaps for formulas in the HTML output, but not in the Makefile that is
				# written to the output directory.
				# The default file is: latex.
				# This tag requires that the tag GENERATE_LATEX is set to YES.

				LATEX_CMD_NAME = latex

				# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
				# index for LaTeX.
				# The default file is: makeindex.
				# This tag requires that the tag GENERATE_LATEX is set to YES.

				MAKEINDEX_CMD_NAME = makeindex

				# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
				# documents. This may be useful for small projects and may help to save some
				# trees in general.
				# The default value is: NO.
				# This tag requires that the tag GENERATE_LATEX is set to YES.

				COMPACT_LATEX = NO

				# The PAPER_TYPE tag can be used to set the paper type that is used by the
				# printer.
				# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
				# 14 inches) and executive (7.25 x 10.5 inches).
				# The default value is: a4.
				# This tag requires that the tag GENERATE_LATEX is set to YES.

				PAPER_TYPE = a4

				# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
				# that should be included in the LaTeX output. To get the times font for
				# instance you can specify
				# EXTRA_PACKAGES=times
				# If left blank no extra packages will be included.
				# This tag requires that the tag GENERATE_LATEX is set to YES.

				EXTRA_PACKAGES =

				# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
				# generated LaTeX document. The header should contain everything until the first
				# chapter. If it is left blank doxygen will generate a standard header. See
				# section "Doxygen usage" for information on how to let doxygen write the
				# default header to a separate file.
				#
				# Note: Only use a user-defined header if you know what you are doing! The
				# following commands have a special meaning inside the header: $title,
				# $datetime, $date, $doxygenversion, $projectname, $projectnumber. Doxygen will
				# replace them by respectively the title of the page, the current date and time,
				# only the current date, the version number of doxygen, the project name (see
				# PROJECT_NAME), or the project number (see PROJECT_NUMBER).
				# This tag requires that the tag GENERATE_LATEX is set to YES.

				LATEX_HEADER =

				# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
				# generated LaTeX document. The footer should contain everything after the last
				# chapter. If it is left blank doxygen will generate a standard footer.
				#
				# Note: Only use a user-defined footer if you know what you are doing!
				# This tag requires that the tag GENERATE_LATEX is set to YES.

				LATEX_FOOTER =

				# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
				# other source files which should be copied to the LATEX_OUTPUT output
				# directory. Note that the files will be copied as-is; there are no commands or
				# markers available.
				# This tag requires that the tag GENERATE_LATEX is set to YES.

				LATEX_EXTRA_FILES =

				# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
				# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
				# contain links (just like the HTML output) instead of page references. This
				# makes the output suitable for online browsing using a PDF viewer.
				# The default value is: YES.
				# This tag requires that the tag GENERATE_LATEX is set to YES.

				PDF_HYPERLINKS = YES

				# If the LATEX_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
				# the PDF file directly from the LaTeX files. Set this option to YES to get a
				# higher quality PDF documentation.
				# The default value is: YES.
				# This tag requires that the tag GENERATE_LATEX is set to YES.

				USE_PDFLATEX = YES

				# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
				# command to the generated LaTeX files. This will instruct LaTeX to keep running
				# if errors occur, instead of asking the user for help. This option is also used
				# when generating formulas in HTML.
				# The default value is: NO.
				# This tag requires that the tag GENERATE_LATEX is set to YES.

				LATEX_BATCHMODE = NO

				# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
				# index chapters (such as File Index, Compound Index, etc.) in the output.
				# The default value is: NO.
				# This tag requires that the tag GENERATE_LATEX is set to YES.

				LATEX_HIDE_INDICES = NO

				# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
				# code with syntax highlighting in the LaTeX output.
				#
				# Note that which sources are shown also depends on other settings such as
				# SOURCE_BROWSER.
				# The default value is: NO.
				# This tag requires that the tag GENERATE_LATEX is set to YES.

				LATEX_SOURCE_CODE = NO

				# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
				# bibliography, e.g. plainnat, or ieeetr. See
				# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
				# The default value is: plain.
				# This tag requires that the tag GENERATE_LATEX is set to YES.

				LATEX_BIB_STYLE = plain

				#---------------------------------------------------------------------------
				# Configuration options related to the RTF output
				#---------------------------------------------------------------------------

				# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
				# RTF output is optimized for Word 97 and may not look too pretty with other RTF
				# readers/editors.
				# The default value is: NO.

				GENERATE_RTF = NO

				# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
				# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
				# it.
				# The default directory is: rtf.
				# This tag requires that the tag GENERATE_RTF is set to YES.

				RTF_OUTPUT = rtf

				# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
				# documents. This may be useful for small projects and may help to save some
				# trees in general.
				# The default value is: NO.
				# This tag requires that the tag GENERATE_RTF is set to YES.

				COMPACT_RTF = NO

				# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
				# contain hyperlink fields. The RTF file will contain links (just like the HTML
				# output) instead of page references. This makes the output suitable for online
				# browsing using Word or some other Word compatible readers that support those
				# fields.
				#
				# Note: WordPad (write) and others do not support links.
				# The default value is: NO.
				# This tag requires that the tag GENERATE_RTF is set to YES.

				RTF_HYPERLINKS = NO

				# Load stylesheet definitions from file. Syntax is similar to doxygen's config
				# file, i.e. a series of assignments. You only have to provide replacements,
				# missing definitions are set to their default value.
				#
				# See also section "Doxygen usage" for information on how to generate the
				# default style sheet that doxygen normally uses.
				# This tag requires that the tag GENERATE_RTF is set to YES.

				RTF_STYLESHEET_FILE =

				# Set optional variables used in the generation of an RTF document. Syntax is
				# similar to doxygen's config file. A template extensions file can be generated
				# using doxygen -e rtf extensionFile.
				# This tag requires that the tag GENERATE_RTF is set to YES.

				RTF_EXTENSIONS_FILE =

				#---------------------------------------------------------------------------
				# Configuration options related to the man page output
				#---------------------------------------------------------------------------

				# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
				# classes and files.
				# The default value is: NO.

				GENERATE_MAN = NO

				# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
				# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
				# it. A directory man3 will be created inside the directory specified by
				# MAN_OUTPUT.
				# The default directory is: man.
				# This tag requires that the tag GENERATE_MAN is set to YES.

				MAN_OUTPUT = man

				# The MAN_EXTENSION tag determines the extension that is added to the generated
				# man pages. In case the manual section does not start with a number, the number
				# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
				# optional.
				# The default value is: .3.
				# This tag requires that the tag GENERATE_MAN is set to YES.

				MAN_EXTENSION = .3

				# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
				# will generate one additional man file for each entity documented in the real
				# man page(s). These additional files only source the real man page, but without
				# them the man command would be unable to find the correct page.
				# The default value is: NO.
				# This tag requires that the tag GENERATE_MAN is set to YES.

				MAN_LINKS = NO

				#---------------------------------------------------------------------------
				# Configuration options related to the XML output
				#---------------------------------------------------------------------------

				# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
				# captures the structure of the code including all documentation.
				# The default value is: NO.

				GENERATE_XML = NO

				# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
				# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
				# it.
				# The default directory is: xml.
				# This tag requires that the tag GENERATE_XML is set to YES.

				XML_OUTPUT = xml

				# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
				# listings (including syntax highlighting and cross-referencing information) to
				# the XML output. Note that enabling this will significantly increase the size
				# of the XML output.
				# The default value is: YES.
				# This tag requires that the tag GENERATE_XML is set to YES.

				XML_PROGRAMLISTING = YES

				#---------------------------------------------------------------------------
				# Configuration options related to the DOCBOOK output
				#---------------------------------------------------------------------------

				# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
				# that can be used to generate PDF.
				# The default value is: NO.

				GENERATE_DOCBOOK = NO

				# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
				# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
				# front of it.
				# The default directory is: docbook.
				# This tag requires that the tag GENERATE_DOCBOOK is set to YES.

				DOCBOOK_OUTPUT = docbook

				#---------------------------------------------------------------------------
				# Configuration options for the AutoGen Definitions output
				#---------------------------------------------------------------------------

				# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
				# Definitions (see http://autogen.sf.net) file that captures the structure of
				# the code including all documentation. Note that this feature is still
				# experimental and incomplete at the moment.
				# The default value is: NO.

				GENERATE_AUTOGEN_DEF = NO

				#---------------------------------------------------------------------------
				# Configuration options related to the Perl module output
				#---------------------------------------------------------------------------

				# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
				# file that captures the structure of the code including all documentation.
				#
				# Note that this feature is still experimental and incomplete at the moment.
				# The default value is: NO.

				GENERATE_PERLMOD = NO

				# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
				# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
				# output from the Perl module output.
				# The default value is: NO.
				# This tag requires that the tag GENERATE_PERLMOD is set to YES.

				PERLMOD_LATEX = NO

				# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
				# formatted so it can be parsed by a human reader. This is useful if you want to
				# understand what is going on. On the other hand, if this tag is set to NO the
				# size of the Perl module output will be much smaller and Perl will parse it
				# just the same.
				# The default value is: YES.
				# This tag requires that the tag GENERATE_PERLMOD is set to YES.

				PERLMOD_PRETTY = YES

				# The names of the make variables in the generated doxyrules.make file are
				# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
				# so different doxyrules.make files included by the same Makefile don't
				# overwrite each other's variables.
				# This tag requires that the tag GENERATE_PERLMOD is set to YES.

				PERLMOD_MAKEVAR_PREFIX =

				#---------------------------------------------------------------------------
				# Configuration options related to the preprocessor
				#---------------------------------------------------------------------------

				# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
				# C-preprocessor directives found in the sources and include files.
				# The default value is: YES.

				ENABLE_PREPROCESSING = YES

				# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
				# in the source code. If set to NO only conditional compilation will be
				# performed. Macro expansion can be done in a controlled way by setting
				# EXPAND_ONLY_PREDEF to YES.
				# The default value is: NO.
				# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

				MACRO_EXPANSION = YES

				# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
				# the macro expansion is limited to the macros specified with the PREDEFINED and
				# EXPAND_AS_DEFINED tags.
				# The default value is: NO.
				# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

				EXPAND_ONLY_PREDEF = YES

				# If the SEARCH_INCLUDES tag is set to YES the includes files in the
				# INCLUDE_PATH will be searched if a #include is found.
				# The default value is: YES.
				# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

				SEARCH_INCLUDES = YES

				# The INCLUDE_PATH tag can be used to specify one or more directories that
				# contain include files that are not input files but should be processed by the
				# preprocessor.
				# This tag requires that the tag SEARCH_INCLUDES is set to YES.

				INCLUDE_PATH = ../include

				# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
				# patterns (like .h and .hpp) to filter out the header-files in the
				# directories. If left blank, the patterns specified with FILE_PATTERNS will be
				# used.
				# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

				INCLUDE_FILE_PATTERNS =

				# The PREDEFINED tag can be used to specify one or more macro names that are
				# defined before the preprocessor is started (similar to the -D option of e.g.
				# gcc). The argument of the tag is a list of macros of the form: name or
				# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
				# is assumed. To prevent a macro definition from being undefined via #undef or
				# recursively expanded use the := operator instead of the = operator.
				# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

				PREDEFINED =

				# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
				# tag can be used to specify a list of macro names that should be expanded. The
				# macro definition that is found in the sources will be used. Use the PREDEFINED
				# tag if you want to use a different macro definition that overrules the
				# definition found in the source code.
				# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

				EXPAND_AS_DEFINED =

				# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
				# remove all references to function-like macros that are alone on a line, have an
				# all uppercase name, and do not end with a semicolon. Such function macros are
				# typically used for boiler-plate code, and will confuse the parser if not
				# removed.
				# The default value is: YES.
				# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.

				SKIP_FUNCTION_MACROS = YES

				#---------------------------------------------------------------------------
				# Configuration options related to external references
				#---------------------------------------------------------------------------

				# The TAGFILES tag can be used to specify one or more tag files. For each tag
				# file the location of the external documentation should be added. The format of
				# a tag file without this location is as follows:
				# TAGFILES = file1 file2 ...
				# Adding location for the tag files is done as follows:
				# TAGFILES = file1=loc1 "file2 = loc2" ...
				# where loc1 and loc2 can be relative or absolute paths or URLs. See the
				# section "Linking to external documentation" for more information about the use
				# of tag files.
				# Note: Each tag file must have an unique name (where the name does NOT include
				# the path). If a tag file is not located in the directory in which doxygen is
				# run, you must also specify the path to the tagfile here.

				TAGFILES =

				# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
				# tag file that is based on the input files it reads. See section "Linking to
				# external documentation" for more information about the usage of tag files.

				GENERATE_TAGFILE =

				# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
				# class index. If set to NO only the inherited external classes will be listed.
				# The default value is: NO.

				ALLEXTERNALS = YES

				# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
				# the modules index. If set to NO, only the current project's groups will be
				# listed.
				# The default value is: YES.

				EXTERNAL_GROUPS = YES

				# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
				# the related pages index. If set to NO, only the current project's pages will
				# be listed.
				# The default value is: YES.

				EXTERNAL_PAGES = YES

				# The PERL_PATH should be the absolute path and name of the perl script
				# interpreter (i.e. the result of 'which perl').
				# The default file (with absolute path) is: /usr/bin/perl.

				PERL_PATH = /usr/bin/perl

				#---------------------------------------------------------------------------
				# Configuration options related to the dot tool
				#---------------------------------------------------------------------------

				# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
				# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
				# NO turns the diagrams off. Note that this option also works with HAVE_DOT
				# disabled, but it is recommended to install and use dot, since it yields more
				# powerful graphs.
				# The default value is: YES.

				CLASS_DIAGRAMS = YES

				# You can define message sequence charts within doxygen comments using the \msc
				# command. Doxygen will then run the mscgen tool (see:
				# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
				# documentation. The MSCGEN_PATH tag allows you to specify the directory where
				# the mscgen tool resides. If left empty the tool is assumed to be found in the
				# default search path.

				MSCGEN_PATH =

				# You can include diagrams made with dia in doxygen documentation. Doxygen will
				# then run dia to produce the diagram and insert it in the documentation. The
				# DIA_PATH tag allows you to specify the directory where the dia binary resides.
				# If left empty dia is assumed to be found in the default search path.

				DIA_PATH =

				# If set to YES, the inheritance and collaboration graphs will hide inheritance
				# and usage relations if the target is undocumented or is not a class.
				# The default value is: YES.

				HIDE_UNDOC_RELATIONS = NO

				# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
				# available from the path. This tool is part of Graphviz (see:
				# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
				# Bell Labs. The other options in this section have no effect if this option is
				# set to NO
				# The default value is: NO.

				HAVE_DOT = YES

				# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
				# to run in parallel. When set to 0 doxygen will base this on the number of
				# processors available in the system. You can set it explicitly to a value
				# larger than 0 to get control over the balance between CPU load and processing
				# speed.
				# Minimum value: 0, maximum value: 32, default value: 0.
				# This tag requires that the tag HAVE_DOT is set to YES.

				DOT_NUM_THREADS = 0

				# When you want a differently looking font n the dot files that doxygen
				# generates you can specify the font name using DOT_FONTNAME. You need to make
				# sure dot is able to find the font, which can be done by putting it in a
				# standard location or by setting the DOTFONTPATH environment variable or by
				# setting DOT_FONTPATH to the directory containing the font.
				# The default value is: Helvetica.
				# This tag requires that the tag HAVE_DOT is set to YES.

				DOT_FONTNAME = Helvetica

				# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
				# dot graphs.
				# Minimum value: 4, maximum value: 24, default value: 10.
				# This tag requires that the tag HAVE_DOT is set to YES.

				DOT_FONTSIZE = 10

				# By default doxygen will tell dot to use the default font as specified with
				# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
				# the path where dot can find it using this tag.
				# This tag requires that the tag HAVE_DOT is set to YES.

				DOT_FONTPATH =

				# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
				# each documented class showing the direct and indirect inheritance relations.
				# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
				# The default value is: YES.
				# This tag requires that the tag HAVE_DOT is set to YES.

				CLASS_GRAPH = YES

				# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
				# graph for each documented class showing the direct and indirect implementation
				# dependencies (inheritance, containment, and class references variables) of the
				# class with other documented classes.
				# The default value is: YES.
				# This tag requires that the tag HAVE_DOT is set to YES.

				COLLABORATION_GRAPH = YES

				# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
				# groups, showing the direct groups dependencies.
				# The default value is: YES.
				# This tag requires that the tag HAVE_DOT is set to YES.

				GROUP_GRAPHS = YES

				# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
				# collaboration diagrams in a style similar to the OMG's Unified Modeling
				# Language.
				# The default value is: NO.
				# This tag requires that the tag HAVE_DOT is set to YES.

				UML_LOOK = NO

				# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
				# class node. If there are many fields or methods and many nodes the graph may
				# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
				# number of items for each type to make the size more manageable. Set this to 0
				# for no limit. Note that the threshold may be exceeded by 50% before the limit
				# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
				# but if the number exceeds 15, the total amount of fields shown is limited to
				# 10.
				# Minimum value: 0, maximum value: 100, default value: 10.
				# This tag requires that the tag HAVE_DOT is set to YES.

				UML_LIMIT_NUM_FIELDS = 10

				# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
				# collaboration graphs will show the relations between templates and their
				# instances.
				# The default value is: NO.
				# This tag requires that the tag HAVE_DOT is set to YES.

				TEMPLATE_RELATIONS = YES

				# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
				# YES then doxygen will generate a graph for each documented file showing the
				# direct and indirect include dependencies of the file with other documented
				# files.
				# The default value is: YES.
				# This tag requires that the tag HAVE_DOT is set to YES.

				INCLUDE_GRAPH = YES

				# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
				# set to YES then doxygen will generate a graph for each documented file showing
				# the direct and indirect include dependencies of the file with other documented
				# files.
				# The default value is: YES.
				# This tag requires that the tag HAVE_DOT is set to YES.

				INCLUDED_BY_GRAPH = YES

				# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
				# dependency graph for every global function or class method.
				#
				# Note that enabling this option will significantly increase the time of a run.
				# So in most cases it will be better to enable call graphs for selected
				# functions only using the \callgraph command.
				# The default value is: NO.
				# This tag requires that the tag HAVE_DOT is set to YES.

				CALL_GRAPH = NO

				# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
				# dependency graph for every global function or class method.
				#
				# Note that enabling this option will significantly increase the time of a run.
				# So in most cases it will be better to enable caller graphs for selected
				# functions only using the \callergraph command.
				# The default value is: NO.
				# This tag requires that the tag HAVE_DOT is set to YES.

				CALLER_GRAPH = NO

				# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
				# hierarchy of all classes instead of a textual one.
				# The default value is: YES.
				# This tag requires that the tag HAVE_DOT is set to YES.

				GRAPHICAL_HIERARCHY = YES

				# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
				# dependencies a directory has on other directories in a graphical way. The
				# dependency relations are determined by the #include relations between the
				# files in the directories.
				# The default value is: YES.
				# This tag requires that the tag HAVE_DOT is set to YES.

				DIRECTORY_GRAPH = YES

				# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
				# generated by dot.
				# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
				# to make the SVG files visible in IE 9+ (other browsers do not have this
				# requirement).
				# Possible values are: png, jpg, gif and svg.
				# The default value is: png.
				# This tag requires that the tag HAVE_DOT is set to YES.

				DOT_IMAGE_FORMAT = @DOT_IMAGE_FORMAT@

				# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
				# enable generation of interactive SVG images that allow zooming and panning.
				#
				# Note that this requires a modern browser other than Internet Explorer. Tested
				# and working are Firefox, Chrome, Safari, and Opera.
				# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
				# the SVG files visible. Older versions of IE do not have SVG support.
				# The default value is: NO.
				# This tag requires that the tag HAVE_DOT is set to YES.

				INTERACTIVE_SVG = NO

				# The DOT_PATH tag can be used to specify the path where the dot tool can be
				# found. If left blank, it is assumed the dot tool can be found in the path.
				# This tag requires that the tag HAVE_DOT is set to YES.

				DOT_PATH = @DOT@

				# The DOTFILE_DIRS tag can be used to specify one or more directories that
				# contain dot files that are included in the documentation (see the \dotfile
				# command).
				# This tag requires that the tag HAVE_DOT is set to YES.

				DOTFILE_DIRS =

				# The MSCFILE_DIRS tag can be used to specify one or more directories that
				# contain msc files that are included in the documentation (see the \mscfile
				# command).

				MSCFILE_DIRS =

				# The DIAFILE_DIRS tag can be used to specify one or more directories that
				# contain dia files that are included in the documentation (see the \diafile
				# command).

				DIAFILE_DIRS =

				# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
				# that will be shown in the graph. If the number of nodes in a graph becomes
				# larger than this value, doxygen will truncate the graph, which is visualized
				# by representing a node as a red box. Note that doxygen if the number of direct
				# children of the root node in a graph is already larger than
				# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
				# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
				# Minimum value: 0, maximum value: 10000, default value: 50.
				# This tag requires that the tag HAVE_DOT is set to YES.

				DOT_GRAPH_MAX_NODES = 50

				# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
				# generated by dot. A depth value of 3 means that only nodes reachable from the
				# root by following a path via at most 3 edges will be shown. Nodes that lay
				# further from the root node will be omitted. Note that setting this option to 1
				# or 2 may greatly reduce the computation time needed for large code bases. Also
				# note that the size of a graph can be further restricted by
				# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
				# Minimum value: 0, maximum value: 1000, default value: 0.
				# This tag requires that the tag HAVE_DOT is set to YES.

				MAX_DOT_GRAPH_DEPTH = 0

				# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
				# background. This is disabled by default, because dot on Windows does not seem
				# to support this out of the box.
				#
				# Warning: Depending on the platform used, enabling this option may lead to
				# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
				# read).
				# The default value is: NO.
				# This tag requires that the tag HAVE_DOT is set to YES.

				DOT_TRANSPARENT = YES

				# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
				# files in one run (i.e. multiple -o and -T options on the command line). This
				# makes dot run faster, but since only newer versions of dot (>1.8.10) support
				# this, this feature is disabled by default.
				# The default value is: NO.
				# This tag requires that the tag HAVE_DOT is set to YES.

				DOT_MULTI_TARGETS = YES

				# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
				# explaining the meaning of the various boxes and arrows in the dot generated
				# graphs.
				# The default value is: YES.
				# This tag requires that the tag HAVE_DOT is set to YES.

				GENERATE_LEGEND = YES

				# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
				# files that are used to generate the various graphs.
				# The default value is: YES.
				# This tag requires that the tag HAVE_DOT is set to YES.

				DOT_CLEANUP = YES

This is an archive of the discontinued LLVM Phabricator instance.

[OpenMP] Add doxygen generation for the runtimeClosedPublic

Details

Diff Detail

Event Timeline

Revision Contents

Diff 309960

openmp/docs/CMakeLists.txt

openmp/docs/doxygen-mainpage.dox

openmp/docs/doxygen.cfg.in

[OpenMP] Add doxygen generation for the runtime
ClosedPublic