[CodeExtractor] Only lift lifetime markers present in the extraction region

[vsk]

Summary

When CodeExtractor finds liftime markers referencing inputs to the
extraction region, it lifts these markers out of the region and inserts
them around the call to the extracted function (see r350420, PR39671).

However, it should *only* lift lifetime markers that are actually
present in the extraction region. I.e., if a start marker is present in
the extraction region but a corresponding end marker isn't (or vice
versa), only the start marker (or end marker, resp.) should be lifted.

This fixes a miscompile in which a lifetime start marker was lifted
inappropriately, causing an argument to the extracted function to
optimized out as undef.

rdar://47802482

[kachkov98]

LGTM

[vsk]

@kachkov98 @davidxl apologies, but this patch is still not correct.

If a lifetime.end marker occurs along one path through the execution region, but not another, then it's still incorrect to lift the marker, because there is some path through the extracted function which would ordinarily not reach the marker. Example (extract blocks extract{1,2}):

entry:
  lifetime_start(%slot)
  br label %header

header:
  use(%slot)
  br i1 undef, label %extract1, label %extract2

extract1:
  ; Backedge.
  br label %header 

extract2:
  ; Lifting this marker would result in %slot being dead in the header block.
  lifetime_end(%slot)
  br label %exit

I think we have two options to fix this:

1. Do not lift any lifetime.end markers. Continue to lift lifetime.start markers for inputs, as this should still be safe.
2. Only lift a lifetime.end marker for an input if that marker would be reached in any every path through the extraction region. If an end marker can't be lifted, erase all lifetime markers for the input in the parent function to prevent bad stack slot merging.

Both options may cause some stack slot merging opportunities to go away. Wdyt?

[kachkov98]

In this example there are two possible entry points in region, so it can't be extracted (first block in region should dominate the others). Maybe there are better examples of issue?
As I understand, correct (but conservative) transformation is to move lifetime.start upwards to some dominator block. According to this, lifting lifetime.start before call must be right. Moving lifetime.end downwards to some post-dominator block is generally incorrect. The case when lifetime.end for the same value occured at every execution path doesn't seem very common, but placing lifetime.end after call gives more accurate information. The thing that is unclear fo me is how erasing all markers for input in case when lifetime.end can't be lifted helps stack coloring?
BTW, it seems there is no simple solution that doesn't reduce stack coloring opportunities in all cases (can't provide information to the caller whether lifetime.end for given value occured or not).

[vsk]

In D57834#1398530, @kachkov98 wrote:

In this example there are two possible entry points in region, so it can't be extracted (first block in region should dominate the others). Maybe there are better examples of issue?

I've posted an example in a follow-up patch: https://reviews.llvm.org/D58253

As I understand, correct (but conservative) transformation is to move lifetime.start upwards to some dominator block. According to this, lifting lifetime.start before call must be right.

Agreed.

Moving lifetime.end downwards to some post-dominator block is generally incorrect. The case when lifetime.end for the same value occured at every execution path doesn't seem very common, but placing lifetime.end after call gives more accurate information. The thing that is unclear fo me is how erasing all markers for input in case when lifetime.end can't be lifted helps stack coloring?

I don't think it does. For option (2), I meant, if we can't lift a lifetime.end marker then don't lift the lifetime.start marker either, and also erase all markers for the input to prevent bad stack coloring. It seems that option (1) is both simpler and sufficient.

BTW, it seems there is no simple solution that doesn't reduce stack coloring opportunities in all cases (can't provide information to the caller whether lifetime.end for given value occured or not).

Agreed, this seems unavoidable.

[kachkov98]

Just for note: it seems that skipping extracting lifetime.start when lifetime.end can't be lifted (in 2nd option) can again lead to miscompile as in https://reviews.llvm.org/D55967 (assume that markers for x and y in rhs are not lifted). It's safer to extract all lifetime.start markers referencing inputs to mark them all as simultaneously used, as in option (1).

llvm/trunk/lib/Transforms/Utils/CodeExtractor.cpp

for (unsigned i = 0, e = Users.size(); i != e; ++i)
     if (Instruction *I = dyn_cast<Instruction>(Users[i]))
       if (I->isTerminator() && !Blocks.count(I->getParent()) &&
           I->getParent()->getParent() == oldFunction)
         I->replaceUsesOfWith(header, newHeader);
 
   return newFunction;
 }
 
-/// Scan the extraction region for lifetime markers which reference inputs.
-/// Erase these markers. Return the inputs which were referenced.
+/// Erase lifetime.start markers which reference inputs to the extraction
+/// region, and insert the referenced memory into \p LifetimesStart. Do the same
+/// with lifetime.end markers (but insert them into \p LifetimesEnd).
 ///
 /// The extraction region is defined by a set of blocks (\p Blocks), and a set
 /// of allocas which will be moved from the caller function into the extracted
 /// function (\p SunkAllocas).
-static SetVector<Value *>
-eraseLifetimeMarkersOnInputs(const SetVector<BasicBlock *> &Blocks,
-                             const SetVector<Value *> &SunkAllocas) {
-  SetVector<Value *> InputObjectsWithLifetime;
+static void eraseLifetimeMarkersOnInputs(const SetVector<BasicBlock *> &Blocks,
+                                         const SetVector<Value *> &SunkAllocas,
+                                         SetVector<Value *> &LifetimesStart,
+                                         SetVector<Value *> &LifetimesEnd) {
   for (BasicBlock *BB : Blocks) {
     for (auto It = BB->begin(), End = BB->end(); It != End;) {
       auto *II = dyn_cast<IntrinsicInst>(&*It);
       ++It;
       if (!II || !II->isLifetimeStartOrEnd())
         continue;
 
       // Get the memory operand of the lifetime marker. If the underlying
       // object is a sunk alloca, or is otherwise defined in the extraction
       // region, the lifetime marker must not be erased.
       Value *Mem = II->getOperand(1)->stripInBoundsOffsets();
       if (SunkAllocas.count(Mem) || definedInRegion(Blocks, Mem))
         continue;
 
-      InputObjectsWithLifetime.insert(Mem);
+      if (II->getIntrinsicID() == Intrinsic::lifetime_start)
+        LifetimesStart.insert(Mem);
+      else
+        LifetimesEnd.insert(Mem);
       II->eraseFromParent();
     }
   }
-  return InputObjectsWithLifetime;
 }
 
 /// Insert lifetime start/end markers surrounding the call to the new function
 /// for objects defined in the caller.
-static void insertLifetimeMarkersSurroundingCall(Module *M,
-                                                 ArrayRef<Value *> Objects,
-                                                 CallInst *TheCall) {
-  if (Objects.empty())
-    return;
-
+static void insertLifetimeMarkersSurroundingCall(
+    Module *M, ArrayRef<Value *> LifetimesStart, ArrayRef<Value *> LifetimesEnd,
   LLVMContext &Ctx = M->getContext();
   auto Int8PtrTy = Type::getInt8PtrTy(Ctx);
   auto NegativeOne = ConstantInt::getSigned(Type::getInt64Ty(Ctx), -1);
-  auto StartFn = llvm::Intrinsic::getDeclaration(
-      M, llvm::Intrinsic::lifetime_start, Int8PtrTy);
-  auto EndFn = llvm::Intrinsic::getDeclaration(M, llvm::Intrinsic::lifetime_end,
-                                               Int8PtrTy);
   Instruction *Term = TheCall->getParent()->getTerminator();
+
+  // The memory argument to a lifetime marker must be a i8*. Cache any bitcasts
+  // needed to satisfy this requirement so they may be reused.
+  DenseMap<Value *, Value *> Bitcasts;
+
+  // Emit lifetime markers for the pointers given in \p Objects. Insert the
+  // markers before the call if \p InsertBefore, and after the call otherwise.
+  auto insertMarkers = [&](Function *MarkerFunc, ArrayRef<Value *> Objects,
+                           bool InsertBefore) {
     for (Value *Mem : Objects) {
-    assert((!isa<Instruction>(Mem) ||
-            cast<Instruction>(Mem)->getFunction() == TheCall->getFunction()) &&
+      assert((!isa<Instruction>(Mem) || cast<Instruction>(Mem)->getFunction() ==
+                                            TheCall->getFunction()) &&
              "Input memory not defined in original function");
-    Value *MemAsI8Ptr = nullptr;
+      Value *&MemAsI8Ptr = Bitcasts[Mem];
+      if (!MemAsI8Ptr) {
         if (Mem->getType() == Int8PtrTy)
           MemAsI8Ptr = Mem;
         else
           MemAsI8Ptr =
               CastInst::CreatePointerCast(Mem, Int8PtrTy, "lt.cast", TheCall);
+      }
+
+      auto Marker = CallInst::Create(MarkerFunc, {NegativeOne, MemAsI8Ptr});
+      if (InsertBefore)
+        Marker->insertBefore(TheCall);
+      else
+        Marker->insertBefore(Term);
+    }
+  };
+
+  if (!LifetimesStart.empty()) {
+    auto StartFn = llvm::Intrinsic::getDeclaration(
+        M, llvm::Intrinsic::lifetime_start, Int8PtrTy);
+    insertMarkers(StartFn, LifetimesStart, /*InsertBefore=*/true);
+  }
 
-    auto StartMarker = CallInst::Create(StartFn, {NegativeOne, MemAsI8Ptr});
-    StartMarker->insertBefore(TheCall);
-    auto EndMarker = CallInst::Create(EndFn, {NegativeOne, MemAsI8Ptr});
-    EndMarker->insertBefore(Term);
+  if (!LifetimesEnd.empty()) {
+    auto EndFn = llvm::Intrinsic::getDeclaration(
+        M, llvm::Intrinsic::lifetime_end, Int8PtrTy);
+    insertMarkers(EndFn, LifetimesEnd, /*InsertBefore=*/false);
   }
 }
 
 /// emitCallAndSwitchStatement - This method sets up the caller side by adding
 /// the call instruction, splitting any PHI nodes in the header block as
 /// necessary.
 CallInst *CodeExtractor::emitCallAndSwitchStatement(Function *newFunction,
                                                     BasicBlock *codeReplacer,
default:
     TheSwitch->setDefaultDest(TheSwitch->getSuccessor(NumExitBlocks));
     // Remove redundant case
     TheSwitch->removeCase(SwitchInst::CaseIt(TheSwitch, NumExitBlocks-1));
     break;
   }
 
   // Insert lifetime markers around the reloads of any output values. The
   // allocas output values are stored in are only in-use in the codeRepl block.
-  insertLifetimeMarkersSurroundingCall(M, ReloadOutputs, call);
+  insertLifetimeMarkersSurroundingCall(M, ReloadOutputs, ReloadOutputs, call);
 
   return call;
 }
 
 void CodeExtractor::moveCodeToFunction(Function *newFunction) {
   Function *oldFunc = (*Blocks.begin())->getParent();
   Function::BasicBlockListType &oldBlocks = oldFunc->getBasicBlockList();
   Function::BasicBlockListType &newBlocks = newFunction->getBasicBlockList();
if (!HoistingCands.empty()) {
     for (auto *II : HoistingCands)
       cast<Instruction>(II)->moveBefore(TI);
   }
 
   // Collect objects which are inputs to the extraction region and also
   // referenced by lifetime start/end markers within it. The effects of these
   // markers must be replicated in the calling function to prevent the stack
   // coloring pass from merging slots which store input objects.
-  ValueSet InputObjectsWithLifetime =
-      eraseLifetimeMarkersOnInputs(Blocks, SinkingCands);
+  ValueSet LifetimesStart, LifetimesEnd;
+  eraseLifetimeMarkersOnInputs(Blocks, SinkingCands, LifetimesStart,
+                               LifetimesEnd);
 
   // Construct new function based on inputs/outputs & add allocas for all defs.
   Function *newFunction =
       constructFunction(inputs, outputs, header, newFuncRoot, codeReplacer,
                         oldFunction, oldFunction->getParent());
 
   // Update the entry count of the function.
   if (BFI) {
     auto Count = BFI->getProfileCountFromFreq(EntryFreq.getFrequency());
     if (Count.hasValue())
       newFunction->setEntryCount(
           ProfileCount(Count.getValue(), Function::PCT_Real)); // FIXME
     BFI->setBlockFreq(codeReplacer, EntryFreq.getFrequency());
   }
 
   CallInst *TheCall =
       emitCallAndSwitchStatement(newFunction, codeReplacer, inputs, outputs);
 
   moveCodeToFunction(newFunction);
 
   // Replicate the effects of any lifetime start/end markers which referenced
   // input objects in the extraction region by placing markers around the call.
   insertLifetimeMarkersSurroundingCall(oldFunction->getParent(),
-                                       InputObjectsWithLifetime.getArrayRef(),
-                                       TheCall);
+                                       LifetimesStart.getArrayRef(),
+                                       LifetimesEnd.getArrayRef(), TheCall);
 
   // Propagate personality info to the new function if there is one.
   if (oldFunction->hasPersonalityFn())
     newFunction->setPersonalityFn(oldFunction->getPersonalityFn());
 
   // Update the branch weights for the exit block.
   if (BFI && NumExitBlocks > 1)
     calculateNewCallTerminatorWeights(codeReplacer, ExitWeights, BPI);

llvm/trunk/test/Transforms/HotColdSplit/lifetime-markers-on-inputs-1.ll

+; RUN: opt -S -hotcoldsplit -hotcoldsplit-threshold=0 < %s 2>&1 | FileCheck %s
+
+declare void @llvm.lifetime.start.p0i8(i64, i8* nocapture)
+
+declare void @llvm.lifetime.end.p0i8(i64, i8* nocapture)
+
+declare void @use(i8*)
+
+declare void @cold_use2(i8*, i8*) cold
+
+; CHECK-LABEL: define {{.*}}@foo(
+define void @foo() {
+entry:
+  %local1 = alloca i256
+  %local2 = alloca i256
+  %local1_cast = bitcast i256* %local1 to i8*
+  %local2_cast = bitcast i256* %local2 to i8*
+  br i1 undef, label %normalPath, label %outlinedPath
+
+normalPath:
+  ; These two uses of stack slots are non-overlapping. Based on this alone,
+  ; the stack slots could be merged.
+  call void @llvm.lifetime.start.p0i8(i64 1, i8* %local1_cast)
+  call void @use(i8* %local1_cast)
+  call void @llvm.lifetime.end.p0i8(i64 1, i8* %local1_cast)
+  call void @llvm.lifetime.start.p0i8(i64 1, i8* %local2_cast)
+  call void @use(i8* %local2_cast)
+  call void @llvm.lifetime.end.p0i8(i64 1, i8* %local2_cast)
+  ret void
+
+; CHECK-LABEL: codeRepl:
+; CHECK: [[local1_cast:%.*]] = bitcast i256* %local1 to i8*
+; CHECK-NEXT: call void @llvm.lifetime.start.p0i8(i64 -1, i8* [[local1_cast]])
+; CHECK-NEXT: [[local2_cast:%.*]] = bitcast i256* %local2 to i8*
+; CHECK-NEXT: call void @llvm.lifetime.start.p0i8(i64 -1, i8* [[local2_cast]])
+; CHECK-NEXT: call i1 @foo.cold.1(i8* %local1_cast, i8* %local2_cast)
+; CHECK-NEXT: call void @llvm.lifetime.end.p0i8(i64 -1, i8* [[local1_cast]])
+; CHECK-NEXT: call void @llvm.lifetime.end.p0i8(i64 -1, i8* [[local2_cast]])
+; CHECK-NEXT: br i1
+
+outlinedPath:
+  ; These two uses of stack slots are overlapping. This should prevent
+  ; merging of stack slots. CodeExtractor must replicate the effects of
+  ; these markers in the caller to inhibit stack coloring.
+  %gep1 = getelementptr inbounds i8, i8* %local1_cast, i64 1
+  call void @llvm.lifetime.start.p0i8(i64 1, i8* %gep1)
+  call void @llvm.lifetime.start.p0i8(i64 1, i8* %local2_cast)
+  call void @cold_use2(i8* %local1_cast, i8* %local2_cast)
+  call void @llvm.lifetime.end.p0i8(i64 1, i8* %gep1)
+  call void @llvm.lifetime.end.p0i8(i64 1, i8* %local2_cast)
+  br i1 undef, label %outlinedPath2, label %outlinedPathExit
+
+outlinedPath2:
+  ; These extra lifetime markers are used to test that we emit only one
+  ; pair of guard markers in the caller per memory object.
+  call void @llvm.lifetime.start.p0i8(i64 1, i8* %local2_cast)
+  call void @use(i8* %local2_cast)
+  call void @llvm.lifetime.end.p0i8(i64 1, i8* %local2_cast)
+  ret void
+
+outlinedPathExit:
+  ret void
+}
+
+; CHECK-LABEL: define {{.*}}@foo.cold.1(
+; CHECK-NOT: @llvm.lifetime

llvm/trunk/test/Transforms/HotColdSplit/lifetime-markers-on-inputs-2.ll

+; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
+; RUN: opt -S -hotcoldsplit -hotcoldsplit-threshold=0 < %s 2>&1 | FileCheck %s
+
+declare void @llvm.lifetime.start.p0i8(i64, i8* nocapture)
+
+declare void @llvm.lifetime.end.p0i8(i64, i8* nocapture)
+
+declare void @cold_use(i8*) cold
+
+; In this CFG, splitting will extract the blocks extract{1,2}. I.e., it will
+; extract a lifetime.start marker, but not the corresponding lifetime.end
+; marker. Make sure that a lifetime.start marker is emitted before the call to
+; the split function, and *only* that marker.
+;
+;            entry
+;          /       \
+;      extract1  no-extract1
+;     (lt.start)    |
+;    /              |
+; extract2          |
+;    \_____         |
+;          \      /
+;            exit
+;          (lt.end)
+;
+; After splitting, we should see:
+;
+;            entry
+;          /       \
+;      codeRepl  no-extract1
+;     (lt.start)   |
+;          \      /
+;            exit
+;          (lt.end)
+define void @only_lifetime_start_is_cold() {
+; CHECK-LABEL: @only_lifetime_start_is_cold(
+; CHECK-NEXT:  entry:
+; CHECK-NEXT:    [[LOCAL1:%.*]] = alloca i256
+; CHECK-NEXT:    [[LOCAL1_CAST:%.*]] = bitcast i256* [[LOCAL1]] to i8*
+; CHECK-NEXT:    br i1 undef, label [[CODEREPL:%.*]], label [[NO_EXTRACT1:%.*]]
+; CHECK:       codeRepl:
+; CHECK-NEXT:    [[LT_CAST:%.*]] = bitcast i256* [[LOCAL1]] to i8*
+; CHECK-NEXT:    call void @llvm.lifetime.start.p0i8(i64 -1, i8* [[LT_CAST]])
+; CHECK-NEXT:    [[TARGETBLOCK:%.*]] = call i1 @only_lifetime_start_is_cold.cold.1(i8* [[LOCAL1_CAST]]) #3
+; CHECK-NEXT:    br i1 [[TARGETBLOCK]], label [[NO_EXTRACT1]], label [[EXIT:%.*]]
+; CHECK:       no-extract1:
+; CHECK-NEXT:    br label [[EXIT]]
+; CHECK:       exit:
+; CHECK-NEXT:    call void @llvm.lifetime.end.p0i8(i64 1, i8* [[LOCAL1_CAST]])
+; CHECK-NEXT:    ret void
+;
+entry:
+  %local1 = alloca i256
+  %local1_cast = bitcast i256* %local1 to i8*
+  br i1 undef, label %extract1, label %no-extract1
+
+extract1:
+  ; lt.start
+  call void @llvm.lifetime.start.p0i8(i64 1, i8* %local1_cast)
+  call void @cold_use(i8* %local1_cast)
+  br i1 undef, label %extract2, label %no-extract1
+
+extract2:
+  br label %exit
+
+no-extract1:
+  br label %exit
+
+exit:
+  ; lt.end
+  call void @llvm.lifetime.end.p0i8(i64 1, i8* %local1_cast)
+  ret void
+}
+
+; In this CFG, splitting will extract the block extract1. I.e., it will extract
+; a lifetime.end marker, but not the corresponding lifetime.start marker. Make
+; sure that a lifetime.end marker is emitted after the call to the split
+; function, and *only* that marker.
+;
+;            entry
+;         (lt.start)
+;        /          \
+;   no-extract1  extract1
+;    (lt.end)    (lt.end)
+;        \         /
+;            exit
+;
+; After splitting, we should see:
+;
+;            entry
+;         (lt.start)
+;        /          \
+;   no-extract1  codeRepl
+;    (lt.end)    (lt.end)
+;        \         /
+;            exit
+define void @only_lifetime_end_is_cold() {
+; CHECK-LABEL: @only_lifetime_end_is_cold(
+; CHECK-NEXT:  entry:
+; CHECK-NEXT:    [[LOCAL1:%.*]] = alloca i256
+; CHECK-NEXT:    [[LOCAL1_CAST:%.*]] = bitcast i256* [[LOCAL1]] to i8*
+; CHECK-NEXT:    call void @llvm.lifetime.start.p0i8(i64 1, i8* [[LOCAL1_CAST]])
+; CHECK-NEXT:    br i1 undef, label [[NO_EXTRACT1:%.*]], label [[CODEREPL:%.*]]
+; CHECK:       no-extract1:
+; CHECK-NEXT:    call void @llvm.lifetime.end.p0i8(i64 1, i8* [[LOCAL1_CAST]])
+; CHECK-NEXT:    br label [[EXIT:%.*]]
+; CHECK:       codeRepl:
+; CHECK-NEXT:    [[LT_CAST:%.*]] = bitcast i256* [[LOCAL1]] to i8*
+; CHECK-NEXT:    call void @only_lifetime_end_is_cold.cold.1(i8* [[LOCAL1_CAST]]) #3
+; CHECK-NEXT:    call void @llvm.lifetime.end.p0i8(i64 -1, i8* [[LT_CAST]])
+; CHECK-NEXT:    br label [[EXIT]]
+; CHECK:       exit:
+; CHECK-NEXT:    ret void
+;
+entry:
+  ; lt.start
+  %local1 = alloca i256
+  %local1_cast = bitcast i256* %local1 to i8*
+  call void @llvm.lifetime.start.p0i8(i64 1, i8* %local1_cast)
+  br i1 undef, label %no-extract1, label %extract1
+
+no-extract1:
+  ; lt.end
+  call void @llvm.lifetime.end.p0i8(i64 1, i8* %local1_cast)
+  br label %exit
+
+extract1:
+  ; lt.end
+  call void @cold_use(i8* %local1_cast)
+  call void @llvm.lifetime.end.p0i8(i64 1, i8* %local1_cast)
+  br label %exit
+
+exit:
+  ret void
+}

llvm/trunk/test/Transforms/HotColdSplit/lifetime-markers-on-inputs.ll

-; RUN: opt -S -hotcoldsplit -hotcoldsplit-threshold=0 < %s 2>&1 | FileCheck %s
-
-declare void @llvm.lifetime.start.p0i8(i64, i8* nocapture)
-
-declare void @llvm.lifetime.end.p0i8(i64, i8* nocapture)
-
-declare void @use(i8*)
-
-declare void @cold_use2(i8*, i8*) cold
-
-; CHECK-LABEL: define {{.*}}@foo(
-define void @foo() {
-entry:
-  %local1 = alloca i256
-  %local2 = alloca i256
-  %local1_cast = bitcast i256* %local1 to i8*
-  %local2_cast = bitcast i256* %local2 to i8*
-  br i1 undef, label %normalPath, label %outlinedPath
-
-normalPath:
-  ; These two uses of stack slots are non-overlapping. Based on this alone,
-  ; the stack slots could be merged.
-  call void @llvm.lifetime.start.p0i8(i64 1, i8* %local1_cast)
-  call void @use(i8* %local1_cast)
-  call void @llvm.lifetime.end.p0i8(i64 1, i8* %local1_cast)
-  call void @llvm.lifetime.start.p0i8(i64 1, i8* %local2_cast)
-  call void @use(i8* %local2_cast)
-  call void @llvm.lifetime.end.p0i8(i64 1, i8* %local2_cast)
-  ret void
-
-; CHECK-LABEL: codeRepl:
-; CHECK: [[local1_cast:%.*]] = bitcast i256* %local1 to i8*
-; CHECK-NEXT: call void @llvm.lifetime.start.p0i8(i64 -1, i8* [[local1_cast]])
-; CHECK-NEXT: [[local2_cast:%.*]] = bitcast i256* %local2 to i8*
-; CHECK-NEXT: call void @llvm.lifetime.start.p0i8(i64 -1, i8* [[local2_cast]])
-; CHECK-NEXT: call i1 @foo.cold.1(i8* %local1_cast, i8* %local2_cast)
-; CHECK-NEXT: call void @llvm.lifetime.end.p0i8(i64 -1, i8* [[local1_cast]])
-; CHECK-NEXT: call void @llvm.lifetime.end.p0i8(i64 -1, i8* [[local2_cast]])
-; CHECK-NEXT: br i1
-
-outlinedPath:
-  ; These two uses of stack slots are overlapping. This should prevent
-  ; merging of stack slots. CodeExtractor must replicate the effects of
-  ; these markers in the caller to inhibit stack coloring.
-  %gep1 = getelementptr inbounds i8, i8* %local1_cast, i64 1
-  call void @llvm.lifetime.start.p0i8(i64 1, i8* %gep1)
-  call void @llvm.lifetime.start.p0i8(i64 1, i8* %local2_cast)
-  call void @cold_use2(i8* %local1_cast, i8* %local2_cast)
-  call void @llvm.lifetime.end.p0i8(i64 1, i8* %gep1)
-  call void @llvm.lifetime.end.p0i8(i64 1, i8* %local2_cast)
-  br i1 undef, label %outlinedPath2, label %outlinedPathExit
-
-outlinedPath2:
-  ; These extra lifetime markers are used to test that we emit only one
-  ; pair of guard markers in the caller per memory object.
-  call void @llvm.lifetime.start.p0i8(i64 1, i8* %local2_cast)
-  call void @use(i8* %local2_cast)
-  call void @llvm.lifetime.end.p0i8(i64 1, i8* %local2_cast)
-  ret void
-
-outlinedPathExit:
-  ret void
-}
-
-; CHECK-LABEL: define {{.*}}@foo.cold.1(
-; CHECK-NOT: @llvm.lifetime