propagate fast math flags via IR on fma and sub expressions

[mcberg2017]

Summary

This change uses fmf subflags to guard fma optimizations as well as unsafe. These changes originated from D46483 and have been simplified via getNode.

[mcberg2017]

Comments? These changes really only have two components. 1.) Adding flags to fma operations and their interior expressions when needed. 2.) extending fusing fma operations based on isContractable().

[mcberg2017]

This review now contains only 1 context, propagating flags onto FMA, it is in effect NFC. The next download will show some cleanup in the tests. The changes are flags only.
In a subsequent review I will extend FMA as earlier.

[spatel]

Thanks for splitting things up - that makes it a lot easier to make sure we're not introducing bugs.
This one is probably good to go, but I want to make sure I understand a couple of the test diffs.

test/CodeGen/PowerPC/fmf-propagation.ll

195

What's the intent of this diff? IIUC, the existing check isn't complete - we could check that there are both an fmul and fma both before and after this patch.

267

Same comment as above.

[mcberg2017]

Some cleanup in the tests for FMFDEBUG

[mcberg2017]

Adding context for FMFDEBUG to show both instructions in the matching

[spatel]

LGTM.

include/llvm/CodeGen/SelectionDAG.h

#endif
 
   // Specialize based on number of operands.
   SDValue getNode(unsigned Opcode, const SDLoc &DL, EVT VT);
   SDValue getNode(unsigned Opcode, const SDLoc &DL, EVT VT, SDValue N,
                   const SDNodeFlags Flags = SDNodeFlags());
   SDValue getNode(unsigned Opcode, const SDLoc &DL, EVT VT, SDValue N1,
                   SDValue N2, const SDNodeFlags Flags = SDNodeFlags());
   SDValue getNode(unsigned Opcode, const SDLoc &DL, EVT VT, SDValue N1,
-                  SDValue N2, SDValue N3);
+                  SDValue N2, SDValue N3,
+                  const SDNodeFlags Flags = SDNodeFlags());
   SDValue getNode(unsigned Opcode, const SDLoc &DL, EVT VT, SDValue N1,
                   SDValue N2, SDValue N3, SDValue N4);
   SDValue getNode(unsigned Opcode, const SDLoc &DL, EVT VT, SDValue N1,
                   SDValue N2, SDValue N3, SDValue N4, SDValue N5);
 
   // Specialize again based on number of operands for nodes with a VTList
   // rather than a single VT.
   SDValue getNode(unsigned Opcode, const SDLoc &DL, SDVTList VTs);

lib/CodeGen/SelectionDAG/DAGCombiner.cpp

SDValue DAGCombiner::visitFADDForFMACombine(SDNode *N) {
   bool HasFMA =
       TLI.isFMAFasterThanFMulAndFAdd(VT) &&
       (!LegalOperations || TLI.isOperationLegalOrCustom(ISD::FMA, VT));
 
   // No valid opcode, do not combine.
   if (!HasFMAD && !HasFMA)
     return SDValue();
 
+  SDNodeFlags Flags = N->getFlags();
   bool AllowFusionGlobally = (Options.AllowFPOpFusion == FPOpFusion::Fast ||
                               Options.UnsafeFPMath || HasFMAD);
   // If the addition is not contractable, do not combine.
   if (!AllowFusionGlobally && !isContractable(N))
     return SDValue();
 
   const SelectionDAGTargetInfo *STI = DAG.getSubtarget().getSelectionDAGInfo();
   if (STI && STI->generateFMAsInMachineCombiner(OptLevel))
SDValue DAGCombiner::visitFADDForFMACombine(SDNode *N) {
   if (Aggressive && isContractableFMUL(N0) && isContractableFMUL(N1)) {
     if (N0.getNode()->use_size() > N1.getNode()->use_size())
       std::swap(N0, N1);
   }
 
   // fold (fadd (fmul x, y), z) -> (fma x, y, z)
   if (isContractableFMUL(N0) && (Aggressive || N0->hasOneUse())) {
     return DAG.getNode(PreferredFusedOpcode, SL, VT,
-                       N0.getOperand(0), N0.getOperand(1), N1);
+                       N0.getOperand(0), N0.getOperand(1), N1, Flags);
   }
 
   // fold (fadd x, (fmul y, z)) -> (fma y, z, x)
   // Note: Commutes FADD operands.
   if (isContractableFMUL(N1) && (Aggressive || N1->hasOneUse())) {
     return DAG.getNode(PreferredFusedOpcode, SL, VT,
-                       N1.getOperand(0), N1.getOperand(1), N0);
+                       N1.getOperand(0), N1.getOperand(1), N0, Flags);
   }
 
   // Look through FP_EXTEND nodes to do more combining.
 
   // fold (fadd (fpext (fmul x, y)), z) -> (fma (fpext x), (fpext y), z)
   if (N0.getOpcode() == ISD::FP_EXTEND) {
     SDValue N00 = N0.getOperand(0);
     if (isContractableFMUL(N00) &&
         TLI.isFPExtFoldable(PreferredFusedOpcode, VT, N00.getValueType())) {
       return DAG.getNode(PreferredFusedOpcode, SL, VT,
                          DAG.getNode(ISD::FP_EXTEND, SL, VT,
                                      N00.getOperand(0)),
                          DAG.getNode(ISD::FP_EXTEND, SL, VT,
-                                     N00.getOperand(1)), N1);
+                                     N00.getOperand(1)), N1, Flags);
     }
   }
 
   // fold (fadd x, (fpext (fmul y, z))) -> (fma (fpext y), (fpext z), x)
   // Note: Commutes FADD operands.
   if (N1.getOpcode() == ISD::FP_EXTEND) {
     SDValue N10 = N1.getOperand(0);
     if (isContractableFMUL(N10) &&
         TLI.isFPExtFoldable(PreferredFusedOpcode, VT, N10.getValueType())) {
       return DAG.getNode(PreferredFusedOpcode, SL, VT,
                          DAG.getNode(ISD::FP_EXTEND, SL, VT,
                                      N10.getOperand(0)),
                          DAG.getNode(ISD::FP_EXTEND, SL, VT,
-                                     N10.getOperand(1)), N0);
+                                     N10.getOperand(1)), N0, Flags);
     }
   }
 
   // More folding opportunities when target permits.
   if (Aggressive) {
     // fold (fadd (fma x, y, (fmul u, v)), z) -> (fma x, y (fma u, v, z))
     // FIXME: The UnsafeAlgebra flag should be propagated to FMA/FMAD, but FMF
     // are currently only supported on binary nodes.
     if (Options.UnsafeFPMath &&
         N0.getOpcode() == PreferredFusedOpcode &&
         N0.getOperand(2).getOpcode() == ISD::FMUL &&
         N0->hasOneUse() && N0.getOperand(2)->hasOneUse()) {
       return DAG.getNode(PreferredFusedOpcode, SL, VT,
                          N0.getOperand(0), N0.getOperand(1),
                          DAG.getNode(PreferredFusedOpcode, SL, VT,
                                      N0.getOperand(2).getOperand(0),
                                      N0.getOperand(2).getOperand(1),
-                                     N1));
+                                     N1, Flags), Flags);
     }
 
     // fold (fadd x, (fma y, z, (fmul u, v)) -> (fma y, z (fma u, v, x))
     // FIXME: The UnsafeAlgebra flag should be propagated to FMA/FMAD, but FMF
     // are currently only supported on binary nodes.
     if (Options.UnsafeFPMath &&
         N1->getOpcode() == PreferredFusedOpcode &&
         N1.getOperand(2).getOpcode() == ISD::FMUL &&
         N1->hasOneUse() && N1.getOperand(2)->hasOneUse()) {
       return DAG.getNode(PreferredFusedOpcode, SL, VT,
                          N1.getOperand(0), N1.getOperand(1),
                          DAG.getNode(PreferredFusedOpcode, SL, VT,
                                      N1.getOperand(2).getOperand(0),
                                      N1.getOperand(2).getOperand(1),
-                                     N0));
+                                     N0, Flags), Flags);
     }
 
 
     // fold (fadd (fma x, y, (fpext (fmul u, v))), z)
     //   -> (fma x, y, (fma (fpext u), (fpext v), z))
     auto FoldFAddFMAFPExtFMul = [&] (
-      SDValue X, SDValue Y, SDValue U, SDValue V, SDValue Z) {
+      SDValue X, SDValue Y, SDValue U, SDValue V, SDValue Z,
+      SDNodeFlags Flags) {
       return DAG.getNode(PreferredFusedOpcode, SL, VT, X, Y,
                          DAG.getNode(PreferredFusedOpcode, SL, VT,
                                      DAG.getNode(ISD::FP_EXTEND, SL, VT, U),
                                      DAG.getNode(ISD::FP_EXTEND, SL, VT, V),
-                                     Z));
+                                     Z, Flags), Flags);
     };
     if (N0.getOpcode() == PreferredFusedOpcode) {
       SDValue N02 = N0.getOperand(2);
       if (N02.getOpcode() == ISD::FP_EXTEND) {
         SDValue N020 = N02.getOperand(0);
         if (isContractableFMUL(N020) &&
             TLI.isFPExtFoldable(PreferredFusedOpcode, VT, N020.getValueType())) {
           return FoldFAddFMAFPExtFMul(N0.getOperand(0), N0.getOperand(1),
                                       N020.getOperand(0), N020.getOperand(1),
-                                      N1);
+                                      N1, Flags);
         }
       }
     }
 
     // fold (fadd (fpext (fma x, y, (fmul u, v))), z)
     //   -> (fma (fpext x), (fpext y), (fma (fpext u), (fpext v), z))
     // FIXME: This turns two single-precision and one double-precision
     // operation into two double-precision operations, which might not be
     // interesting for all targets, especially GPUs.
     auto FoldFAddFPExtFMAFMul = [&] (
-      SDValue X, SDValue Y, SDValue U, SDValue V, SDValue Z) {
+      SDValue X, SDValue Y, SDValue U, SDValue V, SDValue Z,
+      SDNodeFlags Flags) {
       return DAG.getNode(PreferredFusedOpcode, SL, VT,
                          DAG.getNode(ISD::FP_EXTEND, SL, VT, X),
                          DAG.getNode(ISD::FP_EXTEND, SL, VT, Y),
                          DAG.getNode(PreferredFusedOpcode, SL, VT,
                                      DAG.getNode(ISD::FP_EXTEND, SL, VT, U),
                                      DAG.getNode(ISD::FP_EXTEND, SL, VT, V),
-                                     Z));
+                                     Z, Flags), Flags);
     };
     if (N0.getOpcode() == ISD::FP_EXTEND) {
       SDValue N00 = N0.getOperand(0);
       if (N00.getOpcode() == PreferredFusedOpcode) {
         SDValue N002 = N00.getOperand(2);
         if (isContractableFMUL(N002) &&
             TLI.isFPExtFoldable(PreferredFusedOpcode, VT, N00.getValueType())) {
           return FoldFAddFPExtFMAFMul(N00.getOperand(0), N00.getOperand(1),
                                       N002.getOperand(0), N002.getOperand(1),
-                                      N1);
+                                      N1, Flags);
         }
       }
     }
 
     // fold (fadd x, (fma y, z, (fpext (fmul u, v)))
     //   -> (fma y, z, (fma (fpext u), (fpext v), x))
     if (N1.getOpcode() == PreferredFusedOpcode) {
       SDValue N12 = N1.getOperand(2);
       if (N12.getOpcode() == ISD::FP_EXTEND) {
         SDValue N120 = N12.getOperand(0);
         if (isContractableFMUL(N120) &&
             TLI.isFPExtFoldable(PreferredFusedOpcode, VT, N120.getValueType())) {
           return FoldFAddFMAFPExtFMul(N1.getOperand(0), N1.getOperand(1),
                                       N120.getOperand(0), N120.getOperand(1),
-                                      N0);
+                                      N0, Flags);
         }
       }
     }
 
     // fold (fadd x, (fpext (fma y, z, (fmul u, v)))
     //   -> (fma (fpext y), (fpext z), (fma (fpext u), (fpext v), x))
     // FIXME: This turns two single-precision and one double-precision
     // operation into two double-precision operations, which might not be
     // interesting for all targets, especially GPUs.
     if (N1.getOpcode() == ISD::FP_EXTEND) {
       SDValue N10 = N1.getOperand(0);
       if (N10.getOpcode() == PreferredFusedOpcode) {
         SDValue N102 = N10.getOperand(2);
         if (isContractableFMUL(N102) &&
             TLI.isFPExtFoldable(PreferredFusedOpcode, VT, N10.getValueType())) {
           return FoldFAddFPExtFMAFMul(N10.getOperand(0), N10.getOperand(1),
                                       N102.getOperand(0), N102.getOperand(1),
-                                      N0);
+                                      N0, Flags);
         }
       }
     }
   }
 
   return SDValue();
 }
 
SDValue DAGCombiner::visitFSUBForFMACombine(SDNode *N) {
   bool HasFMA =
       TLI.isFMAFasterThanFMulAndFAdd(VT) &&
       (!LegalOperations || TLI.isOperationLegalOrCustom(ISD::FMA, VT));
 
   // No valid opcode, do not combine.
   if (!HasFMAD && !HasFMA)
     return SDValue();
 
+  const SDNodeFlags Flags = N->getFlags();
   bool AllowFusionGlobally = (Options.AllowFPOpFusion == FPOpFusion::Fast ||
                               Options.UnsafeFPMath || HasFMAD);
+
   // If the subtraction is not contractable, do not combine.
   if (!AllowFusionGlobally && !isContractable(N))
     return SDValue();
 
   const SelectionDAGTargetInfo *STI = DAG.getSubtarget().getSelectionDAGInfo();
   if (STI && STI->generateFMAsInMachineCombiner(OptLevel))
     return SDValue();
 
   // Always prefer FMAD to FMA for precision.
   unsigned PreferredFusedOpcode = HasFMAD ? ISD::FMAD : ISD::FMA;
   bool Aggressive = TLI.enableAggressiveFMAFusion(VT);
 
   // Is the node an FMUL and contractable either due to global flags or
   // SDNodeFlags.
   auto isContractableFMUL = [AllowFusionGlobally](SDValue N) {
     if (N.getOpcode() != ISD::FMUL)
       return false;
     return AllowFusionGlobally || isContractable(N.getNode());
   };
 
   // fold (fsub (fmul x, y), z) -> (fma x, y, (fneg z))
   if (isContractableFMUL(N0) && (Aggressive || N0->hasOneUse())) {
     return DAG.getNode(PreferredFusedOpcode, SL, VT,
                        N0.getOperand(0), N0.getOperand(1),
-                       DAG.getNode(ISD::FNEG, SL, VT, N1));
+                       DAG.getNode(ISD::FNEG, SL, VT, N1), Flags);
   }
 
   // fold (fsub x, (fmul y, z)) -> (fma (fneg y), z, x)
   // Note: Commutes FSUB operands.
   if (isContractableFMUL(N1) && (Aggressive || N1->hasOneUse()))
     return DAG.getNode(PreferredFusedOpcode, SL, VT,
                        DAG.getNode(ISD::FNEG, SL, VT,
                                    N1.getOperand(0)),
-                       N1.getOperand(1), N0);
+                       N1.getOperand(1), N0, Flags);
 
   // fold (fsub (fneg (fmul, x, y)), z) -> (fma (fneg x), y, (fneg z))
   if (N0.getOpcode() == ISD::FNEG && isContractableFMUL(N0.getOperand(0)) &&
       (Aggressive || (N0->hasOneUse() && N0.getOperand(0).hasOneUse()))) {
     SDValue N00 = N0.getOperand(0).getOperand(0);
     SDValue N01 = N0.getOperand(0).getOperand(1);
     return DAG.getNode(PreferredFusedOpcode, SL, VT,
                        DAG.getNode(ISD::FNEG, SL, VT, N00), N01,
-                       DAG.getNode(ISD::FNEG, SL, VT, N1));
+                       DAG.getNode(ISD::FNEG, SL, VT, N1), Flags);
   }
 
   // Look through FP_EXTEND nodes to do more combining.
 
   // fold (fsub (fpext (fmul x, y)), z)
   //   -> (fma (fpext x), (fpext y), (fneg z))
   if (N0.getOpcode() == ISD::FP_EXTEND) {
     SDValue N00 = N0.getOperand(0);
     if (isContractableFMUL(N00) &&
         TLI.isFPExtFoldable(PreferredFusedOpcode, VT, N00.getValueType())) {
       return DAG.getNode(PreferredFusedOpcode, SL, VT,
                          DAG.getNode(ISD::FP_EXTEND, SL, VT,
                                      N00.getOperand(0)),
                          DAG.getNode(ISD::FP_EXTEND, SL, VT,
                                      N00.getOperand(1)),
-                         DAG.getNode(ISD::FNEG, SL, VT, N1));
+                         DAG.getNode(ISD::FNEG, SL, VT, N1), Flags);
     }
   }
 
   // fold (fsub x, (fpext (fmul y, z)))
   //   -> (fma (fneg (fpext y)), (fpext z), x)
   // Note: Commutes FSUB operands.
   if (N1.getOpcode() == ISD::FP_EXTEND) {
     SDValue N10 = N1.getOperand(0);
     if (isContractableFMUL(N10) &&
         TLI.isFPExtFoldable(PreferredFusedOpcode, VT, N10.getValueType())) {
       return DAG.getNode(PreferredFusedOpcode, SL, VT,
                          DAG.getNode(ISD::FNEG, SL, VT,
                                      DAG.getNode(ISD::FP_EXTEND, SL, VT,
                                                  N10.getOperand(0))),
                          DAG.getNode(ISD::FP_EXTEND, SL, VT,
                                      N10.getOperand(1)),
-                         N0);
+                         N0, Flags);          
     }
   }
 
   // fold (fsub (fpext (fneg (fmul, x, y))), z)
   //   -> (fneg (fma (fpext x), (fpext y), z))
   // Note: This could be removed with appropriate canonicalization of the
   // input expression into (fneg (fadd (fpext (fmul, x, y)), z). However, the
   // orthogonal flags -fp-contract=fast and -enable-unsafe-fp-math prevent
   // from implementing the canonicalization in visitFSUB.
   if (N0.getOpcode() == ISD::FP_EXTEND) {
     SDValue N00 = N0.getOperand(0);
     if (N00.getOpcode() == ISD::FNEG) {
       SDValue N000 = N00.getOperand(0);
       if (isContractableFMUL(N000) &&
           TLI.isFPExtFoldable(PreferredFusedOpcode, VT, N00.getValueType())) {
         return DAG.getNode(ISD::FNEG, SL, VT,
                            DAG.getNode(PreferredFusedOpcode, SL, VT,
                                        DAG.getNode(ISD::FP_EXTEND, SL, VT,
                                                    N000.getOperand(0)),
                                        DAG.getNode(ISD::FP_EXTEND, SL, VT,
                                                    N000.getOperand(1)),
-                                       N1));
+                                       N1, Flags));
       }
     }
   }
 
   // fold (fsub (fneg (fpext (fmul, x, y))), z)
   //   -> (fneg (fma (fpext x)), (fpext y), z)
   // Note: This could be removed with appropriate canonicalization of the
   // input expression into (fneg (fadd (fpext (fmul, x, y)), z). However, the
   // orthogonal flags -fp-contract=fast and -enable-unsafe-fp-math prevent
   // from implementing the canonicalization in visitFSUB.
   if (N0.getOpcode() == ISD::FNEG) {
     SDValue N00 = N0.getOperand(0);
     if (N00.getOpcode() == ISD::FP_EXTEND) {
       SDValue N000 = N00.getOperand(0);
       if (isContractableFMUL(N000) &&
           TLI.isFPExtFoldable(PreferredFusedOpcode, VT, N000.getValueType())) {
         return DAG.getNode(ISD::FNEG, SL, VT,
                            DAG.getNode(PreferredFusedOpcode, SL, VT,
                                        DAG.getNode(ISD::FP_EXTEND, SL, VT,
                                                    N000.getOperand(0)),
                                        DAG.getNode(ISD::FP_EXTEND, SL, VT,
                                                    N000.getOperand(1)),
-                                       N1));
+                                       N1, Flags));
       }
     }
   }
 
   // More folding opportunities when target permits.
   if (Aggressive) {
     // fold (fsub (fma x, y, (fmul u, v)), z)
     //   -> (fma x, y (fma u, v, (fneg z)))
     // FIXME: The UnsafeAlgebra flag should be propagated to FMA/FMAD, but FMF
     // are currently only supported on binary nodes.
     if (Options.UnsafeFPMath && N0.getOpcode() == PreferredFusedOpcode &&
         isContractableFMUL(N0.getOperand(2)) && N0->hasOneUse() &&
         N0.getOperand(2)->hasOneUse()) {
       return DAG.getNode(PreferredFusedOpcode, SL, VT,
                          N0.getOperand(0), N0.getOperand(1),
                          DAG.getNode(PreferredFusedOpcode, SL, VT,
                                      N0.getOperand(2).getOperand(0),
                                      N0.getOperand(2).getOperand(1),
                                      DAG.getNode(ISD::FNEG, SL, VT,
-                                                 N1)));
+                                                 N1), Flags), Flags);          
     }
 
     // fold (fsub x, (fma y, z, (fmul u, v)))
     //   -> (fma (fneg y), z, (fma (fneg u), v, x))
     // FIXME: The UnsafeAlgebra flag should be propagated to FMA/FMAD, but FMF
     // are currently only supported on binary nodes.
     if (Options.UnsafeFPMath && N1.getOpcode() == PreferredFusedOpcode &&
         isContractableFMUL(N1.getOperand(2))) {
       SDValue N20 = N1.getOperand(2).getOperand(0);
       SDValue N21 = N1.getOperand(2).getOperand(1);
       return DAG.getNode(PreferredFusedOpcode, SL, VT,
                          DAG.getNode(ISD::FNEG, SL, VT,
                                      N1.getOperand(0)),
                          N1.getOperand(1),
                          DAG.getNode(PreferredFusedOpcode, SL, VT,
                                      DAG.getNode(ISD::FNEG, SL, VT, N20),
-
-                                     N21, N0));
+                                     N21, N0, Flags), Flags);      
     }
 
 
     // fold (fsub (fma x, y, (fpext (fmul u, v))), z)
     //   -> (fma x, y (fma (fpext u), (fpext v), (fneg z)))
     if (N0.getOpcode() == PreferredFusedOpcode) {
       SDValue N02 = N0.getOperand(2);
       if (N02.getOpcode() == ISD::FP_EXTEND) {
         SDValue N020 = N02.getOperand(0);
         if (isContractableFMUL(N020) &&
             TLI.isFPExtFoldable(PreferredFusedOpcode, VT, N020.getValueType())) {
           return DAG.getNode(PreferredFusedOpcode, SL, VT,
                              N0.getOperand(0), N0.getOperand(1),
                              DAG.getNode(PreferredFusedOpcode, SL, VT,
                                          DAG.getNode(ISD::FP_EXTEND, SL, VT,
                                                      N020.getOperand(0)),
                                          DAG.getNode(ISD::FP_EXTEND, SL, VT,
                                                      N020.getOperand(1)),
                                          DAG.getNode(ISD::FNEG, SL, VT,
-                                                     N1)));
+                                                     N1), Flags), Flags);              
         }
       }
     }
 
     // fold (fsub (fpext (fma x, y, (fmul u, v))), z)
     //   -> (fma (fpext x), (fpext y),
     //           (fma (fpext u), (fpext v), (fneg z)))
     // FIXME: This turns two single-precision and one double-precision
if (N0.getOpcode() == ISD::FP_EXTEND) {
                              DAG.getNode(ISD::FP_EXTEND, SL, VT,
                                          N00.getOperand(1)),
                              DAG.getNode(PreferredFusedOpcode, SL, VT,
                                          DAG.getNode(ISD::FP_EXTEND, SL, VT,
                                                      N002.getOperand(0)),
                                          DAG.getNode(ISD::FP_EXTEND, SL, VT,
                                                      N002.getOperand(1)),
                                          DAG.getNode(ISD::FNEG, SL, VT,
-                                                     N1)));
+                                                     N1), Flags), Flags);              
         }
       }
     }
 
     // fold (fsub x, (fma y, z, (fpext (fmul u, v))))
     //   -> (fma (fneg y), z, (fma (fneg (fpext u)), (fpext v), x))
     if (N1.getOpcode() == PreferredFusedOpcode &&
         N1.getOperand(2).getOpcode() == ISD::FP_EXTEND) {
       SDValue N120 = N1.getOperand(2).getOperand(0);
       if (isContractableFMUL(N120) &&
           TLI.isFPExtFoldable(PreferredFusedOpcode, VT, N120.getValueType())) {
         SDValue N1200 = N120.getOperand(0);
         SDValue N1201 = N120.getOperand(1);
         return DAG.getNode(PreferredFusedOpcode, SL, VT,
                            DAG.getNode(ISD::FNEG, SL, VT, N1.getOperand(0)),
                            N1.getOperand(1),
                            DAG.getNode(PreferredFusedOpcode, SL, VT,
                                        DAG.getNode(ISD::FNEG, SL, VT,
                                                    DAG.getNode(ISD::FP_EXTEND, SL,
                                                                VT, N1200)),
                                        DAG.getNode(ISD::FP_EXTEND, SL, VT,
                                                    N1201),
-                                       N0));
+                                       N0, Flags), Flags);        
       }
     }
 
     // fold (fsub x, (fpext (fma y, z, (fmul u, v))))
     //   -> (fma (fneg (fpext y)), (fpext z),
     //           (fma (fneg (fpext u)), (fpext v), x))
     // FIXME: This turns two single-precision and one double-precision
     // operation into two double-precision operations, which might not be
if (N1.getOpcode() == ISD::FP_EXTEND &&
                                                    N100)),
                            DAG.getNode(ISD::FP_EXTEND, SL, VT, N101),
                            DAG.getNode(PreferredFusedOpcode, SL, VT,
                                        DAG.getNode(ISD::FNEG, SL, VT,
                                                    DAG.getNode(ISD::FP_EXTEND, SL,
                                                                VT, N1020)),
                                        DAG.getNode(ISD::FP_EXTEND, SL, VT,
                                                    N1021),
-                                       N0));
+                                       N0, Flags), Flags);        
       }
     }
   }
 
   return SDValue();
 }
 
 /// Try to perform FMA combining on a given FMUL node based on the distributive
 /// law x * (y + 1) = x * y + x and variants thereof (commuted versions,
 /// subtraction instead of addition).
 SDValue DAGCombiner::visitFMULForFMADistributiveCombine(SDNode *N) {
   SDValue N0 = N->getOperand(0);
   SDValue N1 = N->getOperand(1);
   EVT VT = N->getValueType(0);
   SDLoc SL(N);
+  const SDNodeFlags Flags = N->getFlags();
 
   assert(N->getOpcode() == ISD::FMUL && "Expected FMUL Operation");
 
   const TargetOptions &Options = DAG.getTarget().Options;
 
   // The transforms below are incorrect when x == 0 and y == inf, because the
   // intermediate multiplication produces a nan.
   if (!Options.NoInfsFPMath)
if (!HasFMAD && !HasFMA)
     return SDValue();
 
   // Always prefer FMAD to FMA for precision.
   unsigned PreferredFusedOpcode = HasFMAD ? ISD::FMAD : ISD::FMA;
   bool Aggressive = TLI.enableAggressiveFMAFusion(VT);
 
   // fold (fmul (fadd x, +1.0), y) -> (fma x, y, y)
   // fold (fmul (fadd x, -1.0), y) -> (fma x, y, (fneg y))
-  auto FuseFADD = [&](SDValue X, SDValue Y) {
+  auto FuseFADD = [&](SDValue X, SDValue Y, const SDNodeFlags Flags) {
     if (X.getOpcode() == ISD::FADD && (Aggressive || X->hasOneUse())) {
       auto XC1 = isConstOrConstSplatFP(X.getOperand(1));
       if (XC1 && XC1->isExactlyValue(+1.0))
-        return DAG.getNode(PreferredFusedOpcode, SL, VT, X.getOperand(0), Y, Y);
+        return DAG.getNode(PreferredFusedOpcode, SL, VT, X.getOperand(0), Y,
+                           Y, Flags);
       if (XC1 && XC1->isExactlyValue(-1.0))
         return DAG.getNode(PreferredFusedOpcode, SL, VT, X.getOperand(0), Y,
-                           DAG.getNode(ISD::FNEG, SL, VT, Y));
+                           DAG.getNode(ISD::FNEG, SL, VT, Y), Flags);      
     }
     return SDValue();
   };
 
-  if (SDValue FMA = FuseFADD(N0, N1))
+  if (SDValue FMA = FuseFADD(N0, N1, Flags))
     return FMA;
-  if (SDValue FMA = FuseFADD(N1, N0))
+  if (SDValue FMA = FuseFADD(N1, N0, Flags))
     return FMA;
 
   // fold (fmul (fsub +1.0, x), y) -> (fma (fneg x), y, y)
   // fold (fmul (fsub -1.0, x), y) -> (fma (fneg x), y, (fneg y))
   // fold (fmul (fsub x, +1.0), y) -> (fma x, y, (fneg y))
   // fold (fmul (fsub x, -1.0), y) -> (fma x, y, y)
-  auto FuseFSUB = [&](SDValue X, SDValue Y) {
+  auto FuseFSUB = [&](SDValue X, SDValue Y, const SDNodeFlags Flags) {
     if (X.getOpcode() == ISD::FSUB && (Aggressive || X->hasOneUse())) {
       auto XC0 = isConstOrConstSplatFP(X.getOperand(0));
       if (XC0 && XC0->isExactlyValue(+1.0))
         return DAG.getNode(PreferredFusedOpcode, SL, VT,
                            DAG.getNode(ISD::FNEG, SL, VT, X.getOperand(1)), Y,
-                           Y);
+                           Y, Flags);
       if (XC0 && XC0->isExactlyValue(-1.0))
         return DAG.getNode(PreferredFusedOpcode, SL, VT,
                            DAG.getNode(ISD::FNEG, SL, VT, X.getOperand(1)), Y,
-                           DAG.getNode(ISD::FNEG, SL, VT, Y));
+                           DAG.getNode(ISD::FNEG, SL, VT, Y), Flags);      
 
       auto XC1 = isConstOrConstSplatFP(X.getOperand(1));
       if (XC1 && XC1->isExactlyValue(+1.0))
         return DAG.getNode(PreferredFusedOpcode, SL, VT, X.getOperand(0), Y,
-                           DAG.getNode(ISD::FNEG, SL, VT, Y));
+                           DAG.getNode(ISD::FNEG, SL, VT, Y), Flags);
       if (XC1 && XC1->isExactlyValue(-1.0))
-        return DAG.getNode(PreferredFusedOpcode, SL, VT, X.getOperand(0), Y, Y);
+        return DAG.getNode(PreferredFusedOpcode, SL, VT, X.getOperand(0), Y,
+                           Y, Flags);
     }
     return SDValue();
   };
 
-  if (SDValue FMA = FuseFSUB(N0, N1))
+  if (SDValue FMA = FuseFSUB(N0, N1, Flags))
     return FMA;
-  if (SDValue FMA = FuseFSUB(N1, N0))
+  if (SDValue FMA = FuseFSUB(N1, N0, Flags))
     return FMA;
 
   return SDValue();
 }
 
 static bool isFMulNegTwo(SDValue &N) {
   if (N.getOpcode() != ISD::FMUL)
     return false;
SDValue DAGCombiner::visitFMA(SDNode *N) {
   SDValue N1 = N->getOperand(1);
   SDValue N2 = N->getOperand(2);
   ConstantFPSDNode *N0CFP = dyn_cast<ConstantFPSDNode>(N0);
   ConstantFPSDNode *N1CFP = dyn_cast<ConstantFPSDNode>(N1);
   EVT VT = N->getValueType(0);
   SDLoc DL(N);
   const TargetOptions &Options = DAG.getTarget().Options;
 
+  // FMA nodes have flags that propagate to the created nodes.
+  const SDNodeFlags Flags = N->getFlags();
+
   // Constant fold FMA.
   if (isa<ConstantFPSDNode>(N0) &&
       isa<ConstantFPSDNode>(N1) &&
       isa<ConstantFPSDNode>(N2)) {
     return DAG.getNode(ISD::FMA, DL, VT, N0, N1, N2);
   }
 
   if (Options.UnsafeFPMath) {
     if (N0CFP && N0CFP->isZero())
       return N2;
     if (N1CFP && N1CFP->isZero())
       return N2;
   }
   // TODO: The FMA node should have flags that propagate to these nodes.
   if (N0CFP && N0CFP->isExactlyValue(1.0))
     return DAG.getNode(ISD::FADD, SDLoc(N), VT, N1, N2);
   if (N1CFP && N1CFP->isExactlyValue(1.0))
     return DAG.getNode(ISD::FADD, SDLoc(N), VT, N0, N2);
 
   // Canonicalize (fma c, x, y) -> (fma x, c, y)
   if (isConstantFPBuildVectorOrConstantFP(N0) &&
      !isConstantFPBuildVectorOrConstantFP(N1))
     return DAG.getNode(ISD::FMA, SDLoc(N), VT, N1, N0, N2);
 
-  // TODO: FMA nodes should have flags that propagate to the created nodes.
-  // For now, create a Flags object for use with reassociation math transforms.
-  SDNodeFlags Flags;
-  Flags.setAllowReassociation(true);
-
   if (Options.UnsafeFPMath) {
     // (fma x, c1, (fmul x, c2)) -> (fmul x, c1+c2)
     if (N2.getOpcode() == ISD::FMUL && N0 == N2.getOperand(0) &&
         isConstantFPBuildVectorOrConstantFP(N1) &&
         isConstantFPBuildVectorOrConstantFP(N2.getOperand(1))) {
       return DAG.getNode(ISD::FMUL, DL, VT, N0,
                          DAG.getNode(ISD::FADD, DL, VT, N1, N2.getOperand(1),
                                      Flags), Flags);

lib/CodeGen/SelectionDAG/SelectionDAG.cpp

SDValue SelectionDAG::getNode(unsigned Opcode, const SDLoc &DL, EVT VT,
 
   InsertNode(N);
   SDValue V = SDValue(N, 0);
   NewSDValueDbgMsg(V, "Creating new node: ", this);
   return V;
 }
 
 SDValue SelectionDAG::getNode(unsigned Opcode, const SDLoc &DL, EVT VT,
-                              SDValue N1, SDValue N2, SDValue N3) {
+                              SDValue N1, SDValue N2, SDValue N3,
+                              const SDNodeFlags Flags) {
   // Perform various simplifications.
   switch (Opcode) {
   case ISD::FMA: {
     ConstantFPSDNode *N1CFP = dyn_cast<ConstantFPSDNode>(N1);
     ConstantFPSDNode *N2CFP = dyn_cast<ConstantFPSDNode>(N2);
     ConstantFPSDNode *N3CFP = dyn_cast<ConstantFPSDNode>(N3);
     if (N1CFP && N2CFP && N3CFP) {
       APFloat  V1 = N1CFP->getValueAPF();
SDValue SelectionDAG::getNode(unsigned Opcode, const SDLoc &DL, EVT VT,
   // Memoize node if it doesn't produce a flag.
   SDNode *N;
   SDVTList VTs = getVTList(VT);
   SDValue Ops[] = {N1, N2, N3};
   if (VT != MVT::Glue) {
     FoldingSetNodeID ID;
     AddNodeIDNode(ID, Opcode, VTs, Ops);
     void *IP = nullptr;
-    if (SDNode *E = FindNodeOrInsertPos(ID, DL, IP))
+    if (SDNode *E = FindNodeOrInsertPos(ID, DL, IP)) {
+      E->intersectFlagsWith(Flags);
       return SDValue(E, 0);
+    }
 
     N = newSDNode<SDNode>(Opcode, DL.getIROrder(), DL.getDebugLoc(), VTs);
+    N->setFlags(Flags);
     createOperands(N, Ops);
     CSEMap.InsertNode(N, IP);
   } else {
     N = newSDNode<SDNode>(Opcode, DL.getIROrder(), DL.getDebugLoc(), VTs);
     createOperands(N, Ops);
   }
 
   InsertNode(N);

test/CodeGen/PowerPC/fmf-propagation.ll

; GLOBAL-NEXT:    blr
   %mul = fmul float %x, %y
   %add = fadd contract float %mul, %z
   ret float %add
 }
 
 ; This shouldn't change anything - the intermediate fmul result is now also flagged.
 
 ; FMFDEBUG-LABEL: Optimized lowered selection DAG: %bb.0 'fmul_fadd_contract2:'
-; FMFDEBUG:         fma {{t[0-9]+}}, {{t[0-9]+}}, {{t[0-9]+}}
+; FMFDEBUG:         fma contract {{t[0-9]+}}, {{t[0-9]+}}, {{t[0-9]+}}
 ; FMFDEBUG:       Type-legalized selection DAG: %bb.0 'fmul_fadd_contract2:'
 
 define float @fmul_fadd_contract2(float %x, float %y, float %z) {
 ; FMF-LABEL: fmul_fadd_contract2:
 ; FMF:       # %bb.0:
 ; FMF-NEXT:    xsmaddasp 3, 1, 2
 ; FMF-NEXT:    fmr 1, 3
 ; FMF-NEXT:    blr
; GLOBAL-NEXT:    blr
   %mul = fmul float %x, %y
   %add = fadd reassoc float %mul, %z
   ret float %add
 }
 
 ; This shouldn't change anything - the intermediate fmul result is now also flagged.
 
 ; FMFDEBUG-LABEL: Optimized lowered selection DAG: %bb.0 'fmul_fadd_reassoc2:'
-; FMFDEBUG:         fma {{t[0-9]+}}, {{t[0-9]+}}
+; FMFDEBUG:         fma reassoc {{t[0-9]+}}, {{t[0-9]+}}
 ; FMFDEBUG:       Type-legalized selection DAG: %bb.0 'fmul_fadd_reassoc2:'
 
 define float @fmul_fadd_reassoc2(float %x, float %y, float %z) {
 ; FMF-LABEL: fmul_fadd_reassoc2:
 ; FMF:       # %bb.0:
 ; FMF-NEXT:    xsmaddasp 3, 1, 2
 ; FMF-NEXT:    fmr 1, 3
 ; FMF-NEXT:    blr
 ;
 ; GLOBAL-LABEL: fmul_fadd_reassoc2:
 ; GLOBAL:       # %bb.0:
 ; GLOBAL-NEXT:    xsmaddasp 3, 1, 2
 ; GLOBAL-NEXT:    fmr 1, 3
 ; GLOBAL-NEXT:    blr
   %mul = fmul reassoc float %x, %y
   %add = fadd reassoc float %mul, %z
   ret float %add
 }
 
 ; The fadd is now fully 'fast'. This implies that contraction is allowed.
 
 ; FMFDEBUG-LABEL: Optimized lowered selection DAG: %bb.0 'fmul_fadd_fast1:'
-; FMFDEBUG:         fma {{t[0-9]+}}, {{t[0-9]+}}, {{t[0-9]+}}
+; FMFDEBUG:         fma nnan ninf nsz arcp contract afn reassoc {{t[0-9]+}}, {{t[0-9]+}}, {{t[0-9]+}}
 ; FMFDEBUG:       Type-legalized selection DAG: %bb.0 'fmul_fadd_fast1:'
 
 define float @fmul_fadd_fast1(float %x, float %y, float %z) {
 ; FMF-LABEL: fmul_fadd_fast1:
 ; FMF:       # %bb.0:
 ; FMF-NEXT:    xsmaddasp 3, 1, 2
 ; FMF-NEXT:    fmr 1, 3
 ; FMF-NEXT:    blr
 ;
 ; GLOBAL-LABEL: fmul_fadd_fast1:
 ; GLOBAL:       # %bb.0:
 ; GLOBAL-NEXT:    xsmaddasp 3, 1, 2
 ; GLOBAL-NEXT:    fmr 1, 3
 ; GLOBAL-NEXT:    blr
   %mul = fmul fast float %x, %y
   %add = fadd fast float %mul, %z
   ret float %add
 }
 
 ; This shouldn't change anything - the intermediate fmul result is now also flagged.
 
 ; FMFDEBUG-LABEL: Optimized lowered selection DAG: %bb.0 'fmul_fadd_fast2:'
-; FMFDEBUG:         fma {{t[0-9]+}}, {{t[0-9]+}}, {{t[0-9]+}}
+; FMFDEBUG:         fma nnan ninf nsz arcp contract afn reassoc {{t[0-9]+}}, {{t[0-9]+}}, {{t[0-9]+}}
 ; FMFDEBUG:       Type-legalized selection DAG: %bb.0 'fmul_fadd_fast2:'
 
 define float @fmul_fadd_fast2(float %x, float %y, float %z) {
 ; FMF-LABEL: fmul_fadd_fast2:
 ; FMF:       # %bb.0:
 ; FMF-NEXT:    xsmaddasp 3, 1, 2
 ; FMF-NEXT:    fmr 1, 3
 ; FMF-NEXT:    blr
; GLOBAL-NEXT:    blr
   %mul = fmul float %x, 42.0
   %fma = call reassoc float @llvm.fma.f32(float %x, float 7.0, float %mul)
   ret float %fma
 }
 
 ; This shouldn't change anything - the intermediate fmul result is now also flagged.
 
 ; FMFDEBUG-LABEL: Optimized lowered selection DAG: %bb.0 'fmul_fma_reassoc2:'
-; FMFDEBUG:         fma reassoc {{t[0-9]+}}
+; FMFDEBUG:         fmul reassoc {{t[0-9]+}}
 ; FMFDEBUG:       Type-legalized selection DAG: %bb.0 'fmul_fma_reassoc2:'
 
 ; GLOBALDEBUG-LABEL: Optimized lowered selection DAG: %bb.0 'fmul_fma_reassoc2:'
 ; GLOBALDEBUG:         fmul reassoc {{t[0-9]+}}
 ; GLOBALDEBUG:       Type-legalized selection DAG: %bb.0 'fmul_fma_reassoc2:'
 
 define float @fmul_fma_reassoc2(float %x) {
 ; FMF-LABEL: fmul_fma_reassoc2:

 
 ; The FMA is now fully 'fast'. This implies that reassociation is allowed.
 
 ; FMFDEBUG-LABEL: Optimized lowered selection DAG: %bb.0 'fmul_fma_fast1:'
 ; FMFDEBUG:         fma nnan ninf nsz arcp contract afn reassoc {{t[0-9]+}}
 ; FMFDEBUG:       Type-legalized selection DAG: %bb.0 'fmul_fma_fast1:'
 
 ; GLOBALDEBUG-LABEL: Optimized lowered selection DAG: %bb.0 'fmul_fma_fast1:'
-; GLOBALDEBUG:         fmul reassoc {{t[0-9]+}}
+; GLOBALDEBUG:         fmul nnan ninf nsz arcp contract afn reassoc {{t[0-9]+}}
 ; GLOBALDEBUG:       Type-legalized selection DAG: %bb.0 'fmul_fma_fast1:'
 
 define float @fmul_fma_fast1(float %x) {
 ; FMF-LABEL: fmul_fma_fast1:
 ; FMF:       # %bb.0:
 ; FMF-NEXT:    addis 3, 2, .LCPI8_0@toc@ha
 ; FMF-NEXT:    addi 3, 3, .LCPI8_0@toc@l
 ; FMF-NEXT:    lfsx 0, 0, 3
; GLOBAL-NEXT:    blr
   %mul = fmul float %x, 42.0
   %fma = call fast float @llvm.fma.f32(float %x, float 7.0, float %mul)
   ret float %fma
 }
 
 ; This shouldn't change anything - the intermediate fmul result is now also flagged.
 
 ; FMFDEBUG-LABEL: Optimized lowered selection DAG: %bb.0 'fmul_fma_fast2:'
-; FMFDEBUG:         fma nnan ninf nsz arcp contract afn reassoc {{t[0-9]+}}
+; FMFDEBUG:         fmul nnan ninf nsz arcp contract afn reassoc {{t[0-9]+}}
 ; FMFDEBUG:       Type-legalized selection DAG: %bb.0 'fmul_fma_fast2:'
 
 ; GLOBALDEBUG-LABEL: Optimized lowered selection DAG: %bb.0 'fmul_fma_fast2:'
-; GLOBALDEBUG:         fmul reassoc {{t[0-9]+}}
+; GLOBALDEBUG:         fmul nnan ninf nsz arcp contract afn reassoc {{t[0-9]+}}
 ; GLOBALDEBUG:       Type-legalized selection DAG: %bb.0 'fmul_fma_fast2:'
 
 define float @fmul_fma_fast2(float %x) {
 ; FMF-LABEL: fmul_fma_fast2:
 ; FMF:       # %bb.0:
 ; FMF-NEXT:    addis 3, 2, .LCPI9_0@toc@ha
 ; FMF-NEXT:    addi 3, 3, .LCPI9_0@toc@l
 ; FMF-NEXT:    lfsx 0, 0, 3

test/CodeGen/X86/sqrt-fastmath-mir.ll

 ; RUN: llc < %s -mtriple=x86_64-unknown-unknown -mattr=avx2,fma -stop-after=expand-isel-pseudos 2>&1 | FileCheck %s
 
 declare float @llvm.sqrt.f32(float) #0
 
 define float @foo(float %f) #0 {
 ; CHECK: {{name: *foo}}
 ; CHECK: body:
 ; CHECK:     %0:fr32 = COPY $xmm0
 ; CHECK:     %1:fr32 = VRSQRTSSr killed %2, %0
 ; CHECK:     %3:fr32 = reassoc VMULSSrr %0, %1
 ; CHECK:     %4:fr32 = VMOVSSrm
-; CHECK:     %5:fr32 = VFMADD213SSr %1, killed %3, %4
+; CHECK:     %5:fr32 = reassoc VFMADD213SSr %1, killed %3, %4
 ; CHECK:     %6:fr32 = VMOVSSrm
 ; CHECK:     %7:fr32 = reassoc VMULSSrr %1, %6
 ; CHECK:     %8:fr32 = reassoc VMULSSrr killed %7, killed %5
 ; CHECK:     %9:fr32 = reassoc VMULSSrr %0, %8
-; CHECK:     %10:fr32 = VFMADD213SSr %8, %9, %4
+; CHECK:     %10:fr32 = reassoc VFMADD213SSr %8, %9, %4
 ; CHECK:     %11:fr32 = reassoc VMULSSrr %9, %6
 ; CHECK:     %12:fr32 = reassoc VMULSSrr killed %11, killed %10
 ; CHECK:     %14:fr32 = FsFLD0SS
 ; CHECK:     %15:fr32 = VCMPSSrr %0, killed %14, 0
 ; CHECK:     %17:vr128 = VANDNPSrr killed %16, killed %13
 ; CHECK:     $xmm0 = COPY %18
 ; CHECK:     RET 0, $xmm0
   %call = tail call float @llvm.sqrt.f32(float %f) #1
   ret float %call
 }
 
 define float @rfoo(float %f) #0 {
 ; CHECK: {{name: *rfoo}}
 ; CHECK: body:             |
 ; CHECK:     %0:fr32 = COPY $xmm0
 ; CHECK:     %1:fr32 = VRSQRTSSr killed %2, %0
 ; CHECK:     %3:fr32 = nnan ninf nsz arcp contract afn reassoc VMULSSrr %0, %1
 ; CHECK:     %4:fr32 = VMOVSSrm
-; CHECK:     %5:fr32 = VFMADD213SSr %1, killed %3, %4
+; CHECK:     %5:fr32 = nnan ninf nsz arcp contract afn reassoc VFMADD213SSr %1, killed %3, %4
 ; CHECK:     %6:fr32 = VMOVSSrm
 ; CHECK:     %7:fr32 = nnan ninf nsz arcp contract afn reassoc VMULSSrr %1, %6
 ; CHECK:     %8:fr32 = nnan ninf nsz arcp contract afn reassoc VMULSSrr killed %7, killed %5
 ; CHECK:     %9:fr32 = nnan ninf nsz arcp contract afn reassoc VMULSSrr %0, %8
-; CHECK:     %10:fr32 = VFMADD213SSr %8, killed %9, %4
+; CHECK:     %10:fr32 = nnan ninf nsz arcp contract afn reassoc VFMADD213SSr %8, killed %9, %4
 ; CHECK:     %11:fr32 = nnan ninf nsz arcp contract afn reassoc VMULSSrr %8, %6
 ; CHECK:     %12:fr32 = nnan ninf nsz arcp contract afn reassoc VMULSSrr killed %11, killed %10
 ; CHECK:     $xmm0 = COPY %12
 ; CHECK:     RET 0, $xmm0
   %sqrt = tail call float @llvm.sqrt.f32(float %f)
   %div = fdiv fast float 1.0, %sqrt
   ret float %div
 }
 
 attributes #0 = { "unsafe-fp-math"="true" "reciprocal-estimates"="sqrt:2" }
 attributes #1 = { nounwind readnone }