[X86] Add MC level selection support for SHLD (64-bit only)

[avt77]

Summary

Depends on D43813. Depends on D41278. We'd like to be albe properly to select SHLD/SHRD instrs or alternative code sequences in dependence on target CPUs. This patch shows the possibility to do it. It supports only one intruction: SHLD(16/32/64)rri8 but it shows how we could do it. If the suggested way is acceptable for us I'll continue with new extended patches.

I tried to split the patch on 2 steps: the debug extension and the support of SHLD itself. Unfortunately I could not find any usage of Machine Combiner except mul-lohi.ll test but this test is not informative enough to show the improvements in the debug print. On the other hand X86 target code does not have any alternative MC code patterns to show the created changes inside existing MC DEBUG() expressions. As result I created this rather big patch including all changes at once.

Most probably I'll create a new extended patch when (and if) we accept this one as initial way to resolve the issue.

[avt77]

I removed all changes related to debug logging: they are published as D41278. In addition I completely implemented the possible substitutions for SHLD64mri8, SHLD64rrCL and SHLDrri8. I did not implement the same for SHLDmrCL because from my point of view the alternative code sequence is too long. Maybe I'm wrong?

Next steps I'm going todo:

• Clang bootstrap with this patch included;
• 32/16-bit implementation;
• SHRD implementation.

But of course it'd be nice to commit 64-bit bootstrapped version before other changes.

[RKSimon]

Please can you make this dependent on D41278 to show the debug output that that patch will add? We should then be able to approve D41278.

[RKSimon]

Adding missing llvm-commits subscriptions

[avt77]

I bootstrapped the compiler with this patch but unfortunatley there was not any machine-combiner activity. It means we need special test(s) to validate the given substitution.

[avt77]

I added special switch "mc-shld-enabled" to allow the job of this patch. As result we have only one changed test specially added by me previously. And now the whole patch is rather small.

[RKSimon]

The BDVER tests are changing despite not having a scheduler model attached - I'm not sure we want that, if there isn't scheduler model attached to a cpu we shouldn't use defaults as that's precisely what the feature flags are fighting against.

[avt77]

I removed the issue with BDVER1 tests. Now we have one diff for GENERIC CPU but I'm sure it's OK.

[avt77]

I re-based the sources and added a new test to demonstarte new debug output.

[Gerolf]

lib/CodeGen/MachineCombiner.cpp

190–191

Shouldn't a case like this be handled by computeOperandLatency?

412

What is the point? Now the return values for if conditions are in-consistent and I find this harder to read.

566

Why needed for this commit?

595

Could you commit the size checks separately?

lib/Target/X86/X86InstrInfo.cpp

3809

Should the be part of isMCShldEnabled?

11615

IsMCShldEnabled?

test/CodeGen/X86/schedule-x86-64-shld.ll

1–2

Why do you need to change these test cases?

[avt77]

lib/CodeGen/MachineCombiner.cpp

566

Because the signature of print was changed with additional default arg and as result we did not pass TII here but w/o TII we can't print instructions' names. Is it OK?

595

Should I combine this with changes in doSubstitute? And I think it should be called like "Proper support of OptSize in Machine Combiner". Is it OK?

test/CodeGen/X86/schedule-x86-64-shld.ll

1–2

Because now we have special switch to allow shld substitution. Or do you mean we should add 3 RUNs here?

[avt77]

I fixed all issues raised by Gerolf except 3 questions: I put my answers/comments on them.

[avt77]

I extracted the changes related to OptSize: they will be published in a separate patch.
In addition I extracted changes related to debug output: they were committed as a last step to close D41278.
As result we have shorter patch and all requirements from Gerolf were resolved.

[avt77]

I re-based sources to reflect commit of D43813.

include/llvm/CodeGen/MachineCombinerPattern.h

enum class MachineCombinerPattern {
   FMLSv2f64_OP2,
   FMLSv2i32_indexed_OP1,
   FMLSv2i32_indexed_OP2,
   FMLSv2i64_indexed_OP1,
   FMLSv2i64_indexed_OP2,
   FMLSv4f32_OP1,
   FMLSv4f32_OP2,
   FMLSv4i32_indexed_OP1,
-  FMLSv4i32_indexed_OP2
+  FMLSv4i32_indexed_OP2,
+  SHLD2SHIFTS
 };
 
 } // end namespace llvm
 
 #endif

lib/CodeGen/MachineCombiner.cpp

for (const MachineOperand &MO : InstrPtr->operands()) {
         assert(II->second < InstrDepth.size() && "Bad Index");
         MachineInstr *DefInstr = InsInstrs[II->second];
         assert(DefInstr &&
                "There must be a definition for a new virtual register");
         DepthOp = InstrDepth[II->second];
         int DefIdx = DefInstr->findRegisterDefOperandIdx(MO.getReg());
         int UseIdx = InstrPtr->findRegisterUseOperandIdx(MO.getReg());
         LatencyOp = TSchedModel.computeOperandLatency(DefInstr, DefIdx,
                                                       InstrPtr, UseIdx);
+
       } else {
         MachineInstr *DefInstr = getOperandDef(MO);
         if (DefInstr) {
           DepthOp = BlockTrace.getInstrCycles(*DefInstr).Depth;
           LatencyOp = TSchedModel.computeOperandLatency(
               DefInstr, DefInstr->findRegisterDefOperandIdx(MO.getReg()),
               InstrPtr, InstrPtr->findRegisterUseOperandIdx(MO.getReg()));
         }
DEBUG(
                       "Length\n");
 
   return ResLenAfterCombine <= ResLenBeforeCombine;
 }
 
 /// \returns true when new instruction sequence should be generated
 /// independent if it lengthens critical path or not
 bool MachineCombiner::doSubstitute(unsigned NewSize, unsigned OldSize) {
-  if (OptSize && (NewSize < OldSize))
-    return true;
+  if (OptSize) { // First of all check OptSize option
+    if (NewSize < OldSize)
+      return true; // Do substitute in any case if new size < old size
+    return false;  // We should not do substitute if new size >= old size
+  }
   if (!TSchedModel.hasInstrSchedModelOrItineraries())
     return true;
   return false;
 }
 
 /// Inserts InsInstrs and deletes DelInstrs. Incrementally updates instruction
 /// depths if requested.
 ///
for (auto P : Patterns) {
       // in a single instruction.
       if (!NewInstCount)
         continue;
 
       DEBUG(if (dump_intrs) {
         dbgs() << "\tFor the Pattern (" << (int)P << ") these instructions could be removed\n";
         for (auto const *InstrPtr : DelInstrs) {
           dbgs() << "\t\t" << STI->getSchedInfoStr(*InstrPtr) << ": ";
-          InstrPtr->print(dbgs(), false, false, TII);
-          dbgs() << "\n";
+          InstrPtr->print(dbgs(), false, false, false, TII);
         }
         dbgs() << "\tThese instructions could replace the removed ones\n";
         for (auto const *InstrPtr : InsInstrs) {
           dbgs() << "\t\t" << STI->getSchedInfoStr(*InstrPtr) << ": ";
-          InstrPtr->print(dbgs(), false, false, TII);
-          dbgs() << "\n";
+          InstrPtr->print(dbgs(), false, false, false, TII);
         }
       });
 
       bool SubstituteAlways = false;
       if (ML && TII->isThroughputPattern(P))
         SubstituteAlways = true;
 
       if (IncrementalUpdate) {
         // Update depths since the last incremental update.
         MinInstr->updateDepths(LastUpdate, BlockIter, RegUnits);
         LastUpdate = BlockIter;
       }
 
       // Substitute when we optimize for codesize and the new sequence has
       // fewer instructions OR
       // the new sequence neither lengthens the critical path nor increases
       // resource pressure.
       if (SubstituteAlways || doSubstitute(NewInstCount, OldInstCount)) {
         insertDeleteInstructions(MBB, MI, InsInstrs, DelInstrs, MinInstr,
                                  RegUnits, IncrementalUpdate);
         // Eagerly stop after the first pattern fires.
         Changed = true;
         break;
-      } else {
+      } else if (!(OptSize && (NewInstCount > OldInstCount))) {
         // For big basic blocks, we only compute the full trace the first time
         // we hit this. We do not invalidate the trace, but instead update the
         // instruction depths incrementally.
         // NOTE: Only the instruction depths up to MI are accurate. All other
         // trace information is not updated.
         MachineTraceMetrics::Trace BlockTrace = MinInstr->getTrace(MBB);
         Traces->verifyAnalysis();
         if (improvesCriticalPathLen(MBB, &MI, BlockTrace, InsInstrs, DelInstrs,

lib/CodeGen/MachineInstr.cpp

 
 void MachineInstr::print(raw_ostream &OS, bool IsStandalone, bool SkipOpers,
                          bool SkipDebugLoc, const TargetInstrInfo *TII) const {
   const Module *M = nullptr;
   const Function *F = nullptr;
   if (const MachineFunction *MF = getMFIfAvailable(*this)) {
     F = &MF->getFunction();
     M = F->getParent();
+    if (!TII)
+      TII = MF->getSubtarget().getInstrInfo();
   }
 
   ModuleSlotTracker MST(M);
   if (F)
     MST.incorporateFunction(*F);
   print(OS, MST, IsStandalone, SkipOpers, SkipDebugLoc, TII);
 }
 

lib/CodeGen/TargetSchedule.cpp

static unsigned findUseIdx(const MachineInstr *MI, unsigned UseOperIdx) {
   return UseIdx;
 }
 
 // Top-level API for clients that know the operand indices.
 unsigned TargetSchedModel::computeOperandLatency(
   const MachineInstr *DefMI, unsigned DefOperIdx,
   const MachineInstr *UseMI, unsigned UseOperIdx) const {
 
-  if (!hasInstrSchedModel() && !hasInstrItineraries())
+  if ((!hasInstrSchedModel() && !hasInstrItineraries()) ||
+      ((int)DefOperIdx < 0 || (((int)UseOperIdx < 0) && UseMI)))
     return TII->defaultDefLatency(SchedModel, *DefMI);
 
   if (hasInstrItineraries()) {
     int OperLatency = 0;
     if (UseMI) {
       OperLatency = TII->getOperandLatency(&InstrItins, *DefMI, DefOperIdx,
                                            *UseMI, UseOperIdx);
     }

lib/Target/X86/X86ISelLowering.cpp

static SDValue combineOr(SDNode *N, SelectionDAG &DAG,
   // fold (or (x << c) | (y >> (64 - c))) ==> (shld64 x, y, c)
   bool OptForSize = DAG.getMachineFunction().getFunction().optForSize();
 
   // SHLD/SHRD instructions have lower register pressure, but on some
   // platforms they have higher latency than the equivalent
   // series of shifts/or that would otherwise be generated.
   // Don't fold (or (x << c) | (y >> (64 - c))) if SHLD/SHRD instructions
   // have higher latencies and we are not optimizing for size.
-  if (!OptForSize && Subtarget.isSHLDSlow())
+  // TODO: for 64-bit we'll generate SHLD code
+  if (!OptForSize && Subtarget.isSHLDSlow() &&
+      !(Subtarget.is64Bit() && Subtarget.getInstrInfo()->isMCShldEnabled()))
     return SDValue();
 
   if (N0.getOpcode() == ISD::SRL && N1.getOpcode() == ISD::SHL)
     std::swap(N0, N1);
   if (N0.getOpcode() != ISD::SHL || N1.getOpcode() != ISD::SRL)
     return SDValue();
   if (!N0.hasOneUse() || !N1.hasOneUse())
     return SDValue();

lib/Target/X86/X86InstrInfo.h

public:
   bool isHighLatencyDef(int opc) const override;
 
   bool hasHighOperandLatency(const TargetSchedModel &SchedModel,
                              const MachineRegisterInfo *MRI,
                              const MachineInstr &DefMI, unsigned DefIdx,
                              const MachineInstr &UseMI,
                              unsigned UseIdx) const override;
 
-  bool useMachineCombiner() const override { return true; }
+  bool useMachineCombiner() const override;
+  bool isMCShldEnabled() const;
+
+  /// When getMachineCombinerPatterns() finds patterns, this function generates
+  /// the instructions that could replace the original code sequence
+  void genAlternativeCodeSequence(
+      MachineInstr &Root, MachineCombinerPattern Pattern,
+      SmallVectorImpl<MachineInstr *> &InsInstrs,
+      SmallVectorImpl<MachineInstr *> &DelInstrs,
+      DenseMap<unsigned, unsigned> &InstrIdxForVirtReg) const override;
+
+  /// Return true when there is potentially a faster code sequence
+  /// for an instruction chain ending in <Root>. All potential patterns are
+  /// listed in the <Patterns> array.
+  bool getMachineCombinerPatterns(
+      MachineInstr &Root,
+      SmallVectorImpl<MachineCombinerPattern> &Patterns) const override;
 
   bool isAssociativeAndCommutative(const MachineInstr &Inst) const override;
 
   bool hasReassociableOperands(const MachineInstr &Inst,
                                const MachineBasicBlock *MBB) const override;
 
   void setSpecialOperandAttr(MachineInstr &OldMI1, MachineInstr &OldMI2,
                              MachineInstr &NewMI1,

lib/Target/X86/X86InstrInfo.cpp

PartialRegUpdateClearance("partial-reg-update-clearance",
                                    "for inserting XOR to avoid partial "
                                    "register update"),
                           cl::init(64), cl::Hidden);
 static cl::opt<unsigned>
 UndefRegClearance("undef-reg-clearance",
                   cl::desc("How many idle instructions we would like before "
                            "certain undef register reads"),
                   cl::init(128), cl::Hidden);
+static cl::opt<bool>
+    MCShldEnabled("mc-shld-enabled", cl::Hidden, cl::init(false),
+                  cl::desc("Enable Machine Combiner SHLD substitution"));
 
 enum {
   // Select which memory operand is being unfolded.
   // (stored in bits 0 - 3)
   TB_INDEX_0    = 0,
   TB_INDEX_1    = 1,
   TB_INDEX_2    = 2,
   TB_INDEX_3    = 3,
if (I.getGroup()->isKMasked()) {
                       TB_ALIGN_NONE | TB_INDEX_4 | TB_FOLDED_LOAD | TB_NO_REVERSE);
       } else {
         AddTableEntry(RegOp2MemOpTable4, MemOp2RegOpTable,
                       I.getRegOpcode(), I.getMemOpcode(),
                       TB_ALIGN_NONE | TB_INDEX_4 | TB_FOLDED_LOAD);
       }
     }
   }
 }
 
 void
 X86InstrInfo::AddTableEntry(RegOp2MemOpTableType &R2MTable,
                             MemOp2RegOpTableType &M2RTable,
                             uint16_t RegOp, uint16_t MemOp, uint16_t Flags) {
   if ((Flags & TB_NO_FORWARD) == 0) {
     assert(!R2MTable.count(RegOp) && "Duplicate entry!");
     R2MTable[RegOp] = std::make_pair(MemOp, Flags);
if (MInfo.CallConstructionID == MachineOutlinerTailCall) {
     // No, insert a call.
     It = MBB.insert(It,
                   BuildMI(MF, DebugLoc(), get(X86::CALL64pcrel32))
                       .addGlobalAddress(M.getNamedValue(MF.getName())));
   }
 
   return It;
 }
+
+bool X86InstrInfo::isMCShldEnabled() const {
+  return MCShldEnabled & Subtarget.getSchedModel().hasInstrSchedModel();
+}
+
+static void genShldCl(MachineInstr &Root,
+                      SmallVectorImpl<MachineInstr *> &InsInstrs,
+                      SmallVectorImpl<MachineInstr *> &DelInstrs,
+                      DenseMap<unsigned, unsigned> &InstrIdxForVirtReg,
+                      ArrayRef<int> Instrs) {
+  MachineBasicBlock *MBB = Root.getParent();
+  MachineFunction &MF = *MBB->getParent();
+  MachineRegisterInfo &MRI = MF.getRegInfo();
+  auto &Subtarget = MF.getSubtarget<X86Subtarget>();
+  const TargetInstrInfo *TII = Subtarget.getInstrInfo();
+  const TargetRegisterInfo *TRI = Subtarget.getRegisterInfo();
+  const TargetRegisterClass *RC = Root.getRegClassConstraint(0, TII, TRI);
+
+  unsigned ResultReg = Root.getOperand(0).getReg();
+  unsigned DestReg = Root.getOperand(1).getReg();
+  unsigned SrcReg = Root.getOperand(2).getReg();
+  unsigned CLReg = Root.getOperand(4).getReg();
+  assert(CLReg == X86::CL && "It must be CL register!!!");
+
+  bool isDead = Root.getOperand(0).isDead();
+  bool isKill = Root.getOperand(1).isKill();
+
+  unsigned VShlReg = MRI.createVirtualRegister(RC);
+  InstrIdxForVirtReg.insert(std::make_pair(VShlReg, 0));
+  MachineInstrBuilder ShlMI =
+      BuildMI(MF, Root.getDebugLoc(), TII->get(Instrs[0]), VShlReg)
+          .addReg(DestReg, getKillRegState(isKill));
+  InsInstrs.push_back(ShlMI);
+
+  unsigned MovReg = MRI.createVirtualRegister(RC);
+  InstrIdxForVirtReg.insert(std::make_pair(MovReg, 0));
+  MachineInstrBuilder MovMI =
+      BuildMI(MF, Root.getDebugLoc(), TII->get(Instrs[1]))
+          .addReg(MovReg, RegState::Define)
+          .addImm(64);
+  InsInstrs.push_back(MovMI);
+
+  unsigned SubReg = MRI.createVirtualRegister(RC);
+  InstrIdxForVirtReg.insert(std::make_pair(SubReg, 0));
+  MachineInstrBuilder SubMI =
+      BuildMI(MF, Root.getDebugLoc(), TII->get(Instrs[2]))
+          .addReg(SubReg, RegState::Define)
+          .addReg(MovReg, RegState::Kill)
+          .addReg(CLReg, RegState::Kill);
+  InsInstrs.push_back(SubMI);
+
+  MachineInstrBuilder MovMI2 =
+      BuildMI(MF, Root.getDebugLoc(), TII->get(Instrs[3]))
+          .addReg(X86::RCX, RegState::Define)
+          .addReg(SubReg);
+  InsInstrs.push_back(MovMI2);
+
+  unsigned VShrReg = MRI.createVirtualRegister(RC);
+  InstrIdxForVirtReg.insert(std::make_pair(VShrReg, 0));
+  MachineInstrBuilder ShrMI =
+      BuildMI(MF, Root.getDebugLoc(), TII->get(Instrs[4]), VShrReg)
+          .addReg(SrcReg, RegState::Kill);
+  InsInstrs.push_back(ShrMI);
+
+  MachineInstrBuilder OrMI =
+      BuildMI(MF, Root.getDebugLoc(), TII->get(Instrs[5]))
+          .addReg(ResultReg, RegState::Define | getDeadRegState(isDead))
+          .addReg(VShrReg, RegState::Kill)
+          .addReg(VShlReg, RegState::Kill);
+  InsInstrs.push_back(OrMI);
+}
+
+static void genShldMri(MachineInstr &Root,
+                       SmallVectorImpl<MachineInstr *> &InsInstrs,
+                       SmallVectorImpl<MachineInstr *> &DelInstrs,
+                       DenseMap<unsigned, unsigned> &InstrIdxForVirtReg,
+                       ArrayRef<int> Instrs, int8_t NBits) {
+  MachineBasicBlock *MBB = Root.getParent();
+  MachineFunction &MF = *MBB->getParent();
+  MachineRegisterInfo &MRI = MF.getRegInfo();
+  auto &Subtarget = MF.getSubtarget<X86Subtarget>();
+  const TargetInstrInfo *TII = Subtarget.getInstrInfo();
+  const TargetRegisterInfo *TRI = Subtarget.getRegisterInfo();
+  const TargetRegisterClass *RC = Root.getRegClassConstraint(0, TII, TRI);
+
+  unsigned BaseReg = Root.getOperand(0).getReg();
+  // TODO: at the moment we support PC-relative addressing mode only.
+  assert(BaseReg == X86::RIP || BaseReg == X86::EIP || BaseReg == X86::IP);
+  unsigned Scale = Root.getOperand(1).getImm();
+  unsigned IndexReg = Root.getOperand(2).getReg();
+  MachineOperand MO = Root.getOperand(3);
+
+  // TODO: we should support all possible types of Disp
+  const GlobalValue *GlobalDisp = nullptr;
+  if (MO.isGlobal())
+    GlobalDisp = MO.getGlobal();
+  else
+    return; // TODO: add other possible mem operands
+
+  unsigned SegReg = Root.getOperand(4).getReg();
+  unsigned SrcReg = Root.getOperand(5).getReg();
+  unsigned Shift = Root.getOperand(6).getImm();
+
+  MachineInstrBuilder ShlMI =
+      BuildMI(MF, Root.getDebugLoc(), TII->get(Instrs[0]))
+          .addReg(BaseReg)
+          .addImm(Scale)
+          .addReg(IndexReg)
+          .addGlobalAddress(GlobalDisp)
+          .addReg(SegReg)
+          .addImm(Shift);
+  InsInstrs.push_back(ShlMI);
+
+  unsigned VShrReg = MRI.createVirtualRegister(RC);
+  InstrIdxForVirtReg.insert(std::make_pair(VShrReg, 0));
+  MachineInstrBuilder ShrMI =
+      BuildMI(MF, Root.getDebugLoc(), TII->get(Instrs[1]), VShrReg)
+          .addReg(SrcReg)
+          .addImm(NBits - Shift);
+  InsInstrs.push_back(ShrMI);
+
+  MachineInstrBuilder OrMI =
+      BuildMI(MF, Root.getDebugLoc(), TII->get(Instrs[2]))
+          .addReg(BaseReg)
+          .addImm(Scale)
+          .addReg(IndexReg)
+          .addGlobalAddress(GlobalDisp)
+          .addReg(SegReg)
+          .addReg(VShrReg);
+  InsInstrs.push_back(OrMI);
+}
+// We try to replace
+//    shldq $12, %rsi, %rdi # sched: [3:3.00]
+// with
+//    shlq $12, %rdi # sched: [1:0.50]
+//    shrq $52, %rsi # sched: [1:0.50]
+//    leaq (%rsi,%rdi), %rax # sched: [1:0.50]
+// iff the last is faster.
+
+static void genShldRri(MachineInstr &Root,
+                       SmallVectorImpl<MachineInstr *> &InsInstrs,
+                       SmallVectorImpl<MachineInstr *> &DelInstrs,
+                       DenseMap<unsigned, unsigned> &InstrIdxForVirtReg,
+                       ArrayRef<int> Instrs, int8_t NBits) {
+  MachineBasicBlock *MBB = Root.getParent();
+  MachineFunction &MF = *MBB->getParent();
+  MachineRegisterInfo &MRI = MF.getRegInfo();
+  auto &Subtarget = MF.getSubtarget<X86Subtarget>();
+  const TargetInstrInfo *TII = Subtarget.getInstrInfo();
+  const TargetRegisterInfo *TRI = Subtarget.getRegisterInfo();
+  const TargetRegisterClass *RC = Root.getRegClassConstraint(0, TII, TRI);
+
+  unsigned ResultReg = Root.getOperand(0).getReg();
+  unsigned DestReg = Root.getOperand(1).getReg();
+  unsigned SrcReg = Root.getOperand(2).getReg();
+
+  // FIXME: Is it possible to zero here?
+  if (int64_t Imm8 = Root.getOperand(3).getImm()) {
+    // Left shift could be replaced with scale factor in case if
+    // shift value is equal to 1, 2 or 4
+    unsigned VShlReg = DestReg;
+    unsigned Scale = 1;
+    switch (Imm8) {
+    case 1:
+      Scale = 2;
+      break;
+    case 2:
+      Scale = 4;
+      break;
+    case 4:
+      Scale = 8;
+      break;
+    default:
+      VShlReg = MRI.createVirtualRegister(RC);
+      InstrIdxForVirtReg.insert(std::make_pair(VShlReg, 0));
+      MachineInstrBuilder ShlMI =
+          BuildMI(MF, Root.getDebugLoc(), TII->get(Instrs[0]), VShlReg)
+              .addReg(DestReg)
+              .addImm(Imm8);
+      InsInstrs.push_back(ShlMI);
+    }
+
+    unsigned VShrReg = MRI.createVirtualRegister(RC);
+    InstrIdxForVirtReg.insert(std::make_pair(VShrReg, 0));
+    MachineInstrBuilder ShrMI =
+        BuildMI(MF, Root.getDebugLoc(), TII->get(Instrs[1]), VShrReg)
+            .addReg(SrcReg)
+            .addImm(NBits - Imm8);
+    InsInstrs.push_back(ShrMI);
+
+    MachineInstrBuilder LeaMI =
+        BuildMI(MF, Root.getDebugLoc(), TII->get(Instrs[2]), ResultReg)
+            .addReg(VShrReg)
+            .addImm(Scale)
+            .addReg(VShlReg)
+            .addImm(0)  // Disp
+            .addReg(0); // SegReg
+    InsInstrs.push_back(LeaMI);
+  }
+}
+
+/// When getMachineCombinerPatterns() finds potential patterns,
+/// this function generates the instructions that could replace the
+/// original code sequence
+void X86InstrInfo::genAlternativeCodeSequence(
+    MachineInstr &Root, MachineCombinerPattern Pattern,
+    SmallVectorImpl<MachineInstr *> &InsInstrs,
+    SmallVectorImpl<MachineInstr *> &DelInstrs,
+    DenseMap<unsigned, unsigned> &InstrIdxForVirtReg) const {
+
+  switch (Pattern) {
+  default:
+    // Reassociate instructions.
+    TargetInstrInfo::genAlternativeCodeSequence(Root, Pattern, InsInstrs,
+                                                DelInstrs, InstrIdxForVirtReg);
+    return;
+  case MachineCombinerPattern::SHLD2SHIFTS:
+    switch (Root.getOpcode()) {
+    default:
+      return;
+    // TODO: do we need sequences for SHLD16mrCL, SHLD32mrCL, SHLD64mrCL?
+    case X86::SHLD16mri8:
+      genShldMri(Root, InsInstrs, DelInstrs, InstrIdxForVirtReg,
+                 {X86::SHL16mi, X86::SHR16ri, X86::OR16mr}, 16);
+      break;
+    case X86::SHLD16rrCL:
+      genShldCl(Root, InsInstrs, DelInstrs, InstrIdxForVirtReg,
+                {X86::SHL16rCL, X86::MOV16ri, X86::SUB16rr, X86::MOV16ri,
+                 X86::SHR16rCL, X86::OR16rr});
+      break;
+    case X86::SHLD16rri8:
+      genShldRri(Root, InsInstrs, DelInstrs, InstrIdxForVirtReg,
+                 {X86::SHL16ri, X86::SHR16ri, X86::LEA16r}, 16);
+      break;
+    case X86::SHLD32mri8:
+      genShldMri(Root, InsInstrs, DelInstrs, InstrIdxForVirtReg,
+                 {X86::SHL32mi, X86::SHR32ri, X86::OR32mr}, 32);
+      break;
+    case X86::SHLD32rrCL:
+      genShldCl(Root, InsInstrs, DelInstrs, InstrIdxForVirtReg,
+                {X86::SHL32rCL, X86::MOV32ri, X86::SUB32rr, X86::MOV32ri,
+                 X86::SHR32rCL, X86::OR32rr});
+      break;
+    case X86::SHLD32rri8:
+      genShldRri(Root, InsInstrs, DelInstrs, InstrIdxForVirtReg,
+                 {X86::SHL32ri, X86::SHR32ri, X86::LEA32r}, 32);
+      break;
+    case X86::SHLD64mri8:
+      genShldMri(Root, InsInstrs, DelInstrs, InstrIdxForVirtReg,
+                 {X86::SHL64mi, X86::SHR64ri, X86::OR64mr}, 64);
+      break;
+    case X86::SHLD64rrCL:
+      genShldCl(Root, InsInstrs, DelInstrs, InstrIdxForVirtReg,
+                {X86::SHL64rCL, X86::MOV64ri, X86::SUB64rr, X86::MOV64ri,
+                 X86::SHR64rCL, X86::OR64rr});
+      break;
+    case X86::SHLD64rri8:
+      genShldRri(Root, InsInstrs, DelInstrs, InstrIdxForVirtReg,
+                 {X86::SHL64ri, X86::SHR64ri, X86::LEA64r}, 64);
+      break;
+    }
+    DelInstrs.push_back(&Root); // Record SHLD/SHRD for deletion
+    break;
+  }
+}
+
+/// Find SHLD/SHRD instructions
+static bool getSHLDPatterns(MachineInstr &Root,
+                            SmallVectorImpl<MachineCombinerPattern> &Patterns) {
+  switch (Root.getOpcode()) {
+  default:
+    return false;
+  // TODO: do we need sequences for SHLD(XX)mrCL ?
+  // It seems they are too long:
+  //    movq  x(%rip), %rax           #  sched: [5:1.00]
+  //    movl  %esi, %ecx              #  sched: [1:0.50]
+  //    shlq  %cl, %rax               #  sched: [1:0.50]
+  //    movl  $64, %ecx               #  sched: [1:0.50]
+  //    subl  %esi, %ecx              #  sched: [1:0.50]
+  //    shrq  %cl, %rdi               #  sched: [1:0.50]
+  //    orq   %rax, %rdi              #  sched: [1:0.50]
+  //    movq  %rdi, x(%rip)           #  sched: [1:1.00]
+  // TODO: At the moment we support 64-bit only
+  // case X86::SHLD16mri8:
+  // case X86::SHLD16rrCL:
+  // case X86::SHLD16rri8:
+  // case X86::SHLD32mri8:
+  // case X86::SHLD32rrCL:
+  // case X86::SHLD32rri8:
+  case X86::SHLD64mri8:
+  case X86::SHLD64rrCL:
+  case X86::SHLD64rri8:
+    break;
+  }
+  Patterns.push_back(MachineCombinerPattern::SHLD2SHIFTS);
+  return true;
+}
+
+/// Return true when there is potentially a faster code sequence for an
+/// instruction chain ending in \p Root. All potential patterns are listed in
+/// the \p Pattern vector. Pattern should be sorted in priority order since the
+/// pattern evaluator stops checking as soon as it finds a faster sequence.
+
+bool X86InstrInfo::getMachineCombinerPatterns(
+    MachineInstr &Root,
+    SmallVectorImpl<MachineCombinerPattern> &Patterns) const {
+  // SHLD patterns
+  if (isMCShldEnabled() && getSHLDPatterns(Root, Patterns))
+    return true;
+  return TargetInstrInfo::getMachineCombinerPatterns(Root, Patterns);
+}
+
+bool X86InstrInfo::useMachineCombiner() const {
+  //  return Subtarget.getSchedModel().hasInstrSchedModel();
+  return true;
+}

test/CodeGen/X86/schedule-x86-64-shld-debug.ll

+; NOTE: Assertions have been autogenerated by utils/update_llc_test_checks.py
+; RUN: llc < %s -mtriple=x86_64-unknown-unknown -mc-shld-enabled -mcpu=x86-64 -machine-combiner-dump-subst-intrs  -debug-only=machine-combiner 2>&1 | FileCheck %s --check-prefix=CHECK --check-prefix=GENERIC
+; RUN: llc < %s -mtriple=x86_64-unknown-unknown -mc-shld-enabled -mcpu=btver2 -machine-combiner-dump-subst-intrs  -debug-only=machine-combiner 2>&1 | FileCheck %s --check-prefix=CHECK --check-prefix=BTVER2
+
+; uint64_t lshift10(uint64_t a, uint64_t b)
+; {
+;     return (a << 10) | (b >> 54);
+; }
+
+define i64 @lshift10_optsize(i64 %a, i64 %b) nounwind readnone optsize {
+; CHECK-LABEL: lshift10_optsize:
+; CHECK:       # %bb.0: # %entry
+; CHECK-NEXT:    shldq $10, %rsi, %rdi
+; CHECK-NEXT:    movq %rdi, %rax
+; CHECK-NEXT:    retq
+entry:
+  %shl = shl i64 %a, 10
+  %shr = lshr i64 %b, 54
+  %or = or i64 %shr, %shl
+  ret i64 %or
+}
+
+define i64 @lshift10(i64 %a, i64 %b) nounwind readnone {
+; CHECK-LABEL: lshift10:
+; CHECK:       # %bb.0: # %entry
+; CHECK-NEXT:    shldq $10, %rsi, %rdi
+; CHECK-NEXT:    movq %rdi, %rax
+; CHECK-NEXT:    retq
+entry:
+  %shl = shl i64 %a, 10
+  %shr = lshr i64 %b, 54
+  %or = or i64 %shr, %shl
+  ret i64 %or
+}
+
+; uint64_t rshift10(uint64_t a, uint64_t b)
+; {
+;     return (a >> 62) | (b << 2);
+; }
+
+; Should be done via shld
+define i64 @rshift10_optsize(i64 %a, i64 %b) nounwind readnone optsize {
+; CHECK-LABEL: rshift10_optsize:
+; CHECK:       # %bb.0: # %entry
+; CHECK-NEXT:    shrdq $62, %rsi, %rdi
+; CHECK-NEXT:    movq %rdi, %rax
+; CHECK-NEXT:    retq
+entry:
+  %shl = lshr i64 %a, 62
+  %shr = shl i64 %b, 2
+  %or = or i64 %shr, %shl
+  ret i64 %or
+}
+
+; Should be done via lea (x,y,4),z
+define i64 @rshift10(i64 %a, i64 %b) nounwind readnone {
+; CHECK-LABEL: rshift10:
+; CHECK:       # %bb.0: # %entry
+; CHECK-NEXT:    shrdq $62, %rsi, %rdi
+; CHECK-NEXT:    movq %rdi, %rax
+; CHECK-NEXT:    retq
+entry:
+  %shl = lshr i64 %a, 62
+  %shr = shl i64 %b, 2
+  %or = or i64 %shr, %shl
+  ret i64 %or
+}
+
+;uint64_t lshift(uint64_t a, uint64_t b, uint64_t c)
+;{
+;    return (a << c) | (b >> (64-c));
+;}
+
+define i64 @lshift_cl_optsize(i64 %a, i64 %b, i64 %c) nounwind readnone optsize {
+; CHECK-LABEL: lshift_cl_optsize:
+; CHECK:       # %bb.0: # %entry
+; CHECK-NEXT:    movl %edx, %ecx
+; CHECK-NEXT:    shldq %cl, %rsi, %rdi
+; CHECK-NEXT:    movq %rdi, %rax
+; CHECK-NEXT:    retq
+entry:
+  %shl = shl i64 %a, %c
+  %sub = sub nsw i64 64, %c
+  %shr = lshr i64 %b, %sub
+  %or = or i64 %shr, %shl
+  ret i64 %or
+}
+
+define i64 @lshift_cl(i64 %a, i64 %b, i64 %c) nounwind readnone {
+; CHECK-LABEL: lshift_cl:
+; CHECK:       # %bb.0: # %entry
+; CHECK-NEXT:    movl %edx, %ecx
+; CHECK-NEXT:    shldq %cl, %rsi, %rdi
+; CHECK-NEXT:    movq %rdi, %rax
+; CHECK-NEXT:    retq
+entry:
+  %shl = shl i64 %a, %c
+  %sub = sub nsw i64 64, %c
+  %shr = lshr i64 %b, %sub
+  %or = or i64 %shr, %shl
+  ret i64 %or
+}
+
+
+;uint64_t rshift(uint64_t a, uint64_t b, int c)
+;{
+;    return (a >> c) | (b << (64-c));
+;}
+
+define i64 @rshift_cl_optsize(i64 %a, i64 %b, i64 %c) nounwind readnone optsize {
+; CHECK-LABEL: rshift_cl_optsize:
+; CHECK:       # %bb.0: # %entry
+; CHECK-NEXT:    movl %edx, %ecx
+; CHECK-NEXT:    shrdq %cl, %rsi, %rdi
+; CHECK-NEXT:    movq %rdi, %rax
+; CHECK-NEXT:    retq
+entry:
+  %shr = lshr i64 %a, %c
+  %sub = sub nsw i64 64, %c
+  %shl = shl i64 %b, %sub
+  %or = or i64 %shr, %shl
+  ret i64 %or
+}
+
+define i64 @rshift_cl(i64 %a, i64 %b, i64 %c) nounwind readnone {
+; CHECK-LABEL: rshift_cl:
+; CHECK:       # %bb.0: # %entry
+; CHECK-NEXT:    movl %edx, %ecx
+; CHECK-NEXT:    shrdq %cl, %rsi, %rdi
+; CHECK-NEXT:    movq %rdi, %rax
+; CHECK-NEXT:    retq
+entry:
+  %shr = lshr i64 %a, %c
+  %sub = sub nsw i64 64, %c
+  %shl = shl i64 %b, %sub
+  %or = or i64 %shr, %shl
+  ret i64 %or
+}
+
+; extern uint64_t x;
+;void lshift(uint64_t a, uint64_t b, uint_64_t c)
+;{
+;    x = (x << c) | (a >> (64-c));
+;}
+@x = global i64 0, align 4
+
+define void @lshift_mem_cl_optsize(i64 %a, i64 %c) nounwind readnone optsize {
+; CHECK-LABEL: lshift_mem_cl_optsize:
+; CHECK:       # %bb.0: # %entry
+; CHECK-NEXT:    movl %esi, %ecx
+; CHECK-NEXT:    shldq %cl, %rdi, {{.*}}(%rip)
+; CHECK-NEXT:    retq
+entry:
+  %b = load i64, i64* @x
+  %shl = shl i64 %b, %c
+  %sub = sub nsw i64 64, %c
+  %shr = lshr i64 %a, %sub
+  %or = or i64 %shl, %shr
+  store i64 %or, i64* @x
+  ret void
+}
+
+define void @lshift_mem_cl(i64 %a, i64 %c) nounwind readnone {
+; CHECK-LABEL: lshift_mem_cl:
+; CHECK:       # %bb.0: # %entry
+; CHECK-NEXT:    movl %esi, %ecx
+; CHECK-NEXT:    shldq %cl, %rdi, {{.*}}(%rip)
+; CHECK-NEXT:    retq
+entry:
+  %b = load i64, i64* @x
+  %shl = shl i64 %b, %c
+  %sub = sub nsw i64 64, %c
+  %shr = lshr i64 %a, %sub
+  %or = or i64 %shl, %shr
+  store i64 %or, i64* @x
+  ret void
+}
+
+define void @lshift_mem(i64 %a) nounwind readnone {
+; GENERIC-LABEL: lshift_mem:
+; GENERIC:       # %bb.0: # %enMachine InstCombiner: lshift_mem_optsize
+; GENERIC-NEXT:  Combining MBB entry
+; GENERIC-NEXT:    For the Pattern (56) these instructions could be removed
+; GENERIC-NEXT:     sched: [8:1.00]: SHLD64mri8 $rip, 1, $noreg, @x, $noreg, %0, 10, implicit-def dead $eflags; mem:ST8[@x] LD8[@x](dereferenceable)
+; GENERIC-NEXT:    These instructions could replace the removed ones
+; GENERIC-NEXT:     sched: [7:1.00]: SHL64mi $physreg41, 1, $noreg, @x, $noreg, 10, implicit-def $physreg25
+; GENERIC-NEXT:     sched: [1:0.50]: %1 = SHR64ri %0, 54, implicit-def $physreg25
+; GENERIC-NEXT:     sched: [7:1.00]: OR64mr $physreg41, 1, $noreg, @x, $noreg, %1, implicit-def $physreg25
+; GENERIC-NEXT:  Machine InstCombiner: lshift_mem_b
+; GENERIC-NEXT:  Combining MBB entry
+; GENERIC-NEXT:    For the Pattern (56) these instructions could be removed
+; GENERIC-NEXT:     sched: [2:0.67]: %2:gr64 = SHLD64rri8 %0, killed %1, 10, implicit-def dead $eflags
+; GENERIC-NEXT:    These instructions could replace the removed ones
+; GENERIC-NEXT:     sched: [1:0.50]: %3 = SHL64ri %0, 10, implicit-def $physreg25
+; GENERIC-NEXT:     sched: [1:0.50]: %4 = SHR64ri %1, 54, implicit-def $physreg25
+; GENERIC-NEXT:     sched: [1:0.50]: %2 = LEA64r %4, 1, %3, 0, $noreg
+; GENERIC-NEXT:    Dependence data for %2:gr64 = SHLD64rri8 %0:gr64, killed %1:gr64, 10, implicit-def dead $eflags
+; GENERIC-NEXT:    NewRootDepth: 1 RootDepth: 5
+; GENERIC-NEXT:    NewRootLatency: 3 RootLatency: 2
+; GENERIC-NEXT:    RootSlack: 0 SlackIsAccurate=1
+; GENERIC-NEXT:    NewRootDepth + NewRootLatency = 4
+; GENERIC-NEXT:    RootDepth + RootLatency + RootSlack = 7
+; GENERIC-NEXT:     It IMPROVES PathLen because
+; GENERIC-NEXT:     NewCycleCount = 4, OldCycleCount = 7
+; GENERIC-NEXT:     Resource length before replacement: 3 and after: 3
+; GENERIC-NEXT:     As result it IMPROVES/PRESERVES Resource Length
+; GENERIC-NEXT:  Machine InstCombiner: lshift_mem_b_optsize
+; GENERIC-NEXT:  Combining MBB entry
+; GENERIC-NEXT:    For the Pattern (56) these instructions could be removed
+; GENERIC-NEXT:     sched: [2:0.67]: %2:gr64 = SHLD64rri8 %0, killed %1, 10, implicit-def dead $eflags
+; GENERIC-NEXT:    These instructions could replace the removed ones
+; GENERIC-NEXT:     sched: [1:0.50]: %3 = SHL64ri %0, 10, implicit-def $physreg25
+; GENERIC-NEXT:     sched: [1:0.50]: %4 = SHR64ri %1, 54, implicit-def $physreg25
+; GENERIC-NEXT:     sched: [1:0.50]: %2 = LEA64r %4, 1, %3, 0, $noreg
+; GENERIC-NEXT:  try
+; GENERIC-NEXT:    shldq $10, %rdi, {{.*}}(%rip)
+; GENERIC-NEXT:    retq
+;
+; BTVER2-LABEL: lshift_mem:
+; BTVER2:       # %bb.0: # %enMachine InstCombiner: lshift_mem_optsize
+; BTVER2-NEXT:  Combining MBB entry
+; BTVER2-NEXT:    For the Pattern (56) these instructions could be removed
+; BTVER2-NEXT:     sched: [9:11.00]: SHLD64mri8 $rip, 1, $noreg, @x, $noreg, %0, 10, implicit-def dead $eflags; mem:ST8[@x] LD8[@x](dereferenceable)
+; BTVER2-NEXT:    These instructions could replace the removed ones
+; BTVER2-NEXT:     sched: [4:1.00]: SHL64mi $physreg41, 1, $noreg, @x, $noreg, 10, implicit-def $physreg25
+; BTVER2-NEXT:     sched: [1:0.50]: %1 = SHR64ri %0, 54, implicit-def $physreg25
+; BTVER2-NEXT:     sched: [4:1.00]: OR64mr $physreg41, 1, $noreg, @x, $noreg, %1, implicit-def $physreg25
+; BTVER2-NEXT:  Machine InstCombiner: lshift_mem_b
+; BTVER2-NEXT:  Combining MBB entry
+; BTVER2-NEXT:    For the Pattern (56) these instructions could be removed
+; BTVER2-NEXT:     sched: [3:3.00]: %2:gr64 = SHLD64rri8 %0, killed %1, 10, implicit-def dead $eflags
+; BTVER2-NEXT:    These instructions could replace the removed ones
+; BTVER2-NEXT:     sched: [1:0.50]: %3 = SHL64ri %0, 10, implicit-def $physreg25
+; BTVER2-NEXT:     sched: [1:0.50]: %4 = SHR64ri %1, 54, implicit-def $physreg25
+; BTVER2-NEXT:     sched: [1:0.50]: %2 = LEA64r %4, 1, %3, 0, $noreg
+; BTVER2-NEXT:    Dependence data for %2:gr64 = SHLD64rri8 %0:gr64, killed %1:gr64, 10, implicit-def dead $eflags
+; BTVER2-NEXT:    NewRootDepth: 2 RootDepth: 5
+; BTVER2-NEXT:    NewRootLatency: 3 RootLatency: 3
+; BTVER2-NEXT:    RootSlack: 0 SlackIsAccurate=1
+; BTVER2-NEXT:    NewRootDepth + NewRootLatency = 5
+; BTVER2-NEXT:    RootDepth + RootLatency + RootSlack = 8
+; BTVER2-NEXT:     It IMPROVES PathLen because
+; BTVER2-NEXT:     NewCycleCount = 5, OldCycleCount = 8
+; BTVER2-NEXT:     Resource length before replacement: 7 and after: 6
+; BTVER2-NEXT:     As result it IMPROVES/PRESERVES Resource Length
+; BTVER2-NEXT:  Machine InstCombiner: lshift_mem_b_optsize
+; BTVER2-NEXT:  Combining MBB entry
+; BTVER2-NEXT:    For the Pattern (56) these instructions could be removed
+; BTVER2-NEXT:     sched: [3:3.00]: %2:gr64 = SHLD64rri8 %0, killed %1, 10, implicit-def dead $eflags
+; BTVER2-NEXT:    These instructions could replace the removed ones
+; BTVER2-NEXT:     sched: [1:0.50]: %3 = SHL64ri %0, 10, implicit-def $physreg25
+; BTVER2-NEXT:     sched: [1:0.50]: %4 = SHR64ri %1, 54, implicit-def $physreg25
+; BTVER2-NEXT:     sched: [1:0.50]: %2 = LEA64r %4, 1, %3, 0, $noreg
+; BTVER2-NEXT:  try
+; BTVER2-NEXT:    shldq $10, %rdi, {{.*}}(%rip)
+; BTVER2-NEXT:    retq
+entry:
+  %b = load i64, i64* @x
+  %shl = shl i64 %b, 10
+  %shr = lshr i64 %a, 54
+  %or = or i64 %shr, %shl
+  store i64 %or, i64* @x
+  ret void
+}
+
+define void @lshift_mem_optsize(i64 %a) nounwind readnone optsize {
+; CHECK-LABEL: lshift_mem_optsize:
+; CHECK:       # %bb.0: # %entry
+; CHECK-NEXT:    shldq $10, %rdi, {{.*}}(%rip)
+; CHECK-NEXT:    retq
+entry:
+  %b = load i64, i64* @x
+  %shl = shl i64 %b, 10
+  %shr = lshr i64 %a, 54
+  %or = or i64 %shr, %shl
+  store i64 %or, i64* @x
+  ret void
+}
+
+define void @lshift_mem_b(i64 %b) nounwind readnone {
+; CHECK-LABEL: lshift_mem_b:
+; CHECK:       # %bb.0: # %entry
+; CHECK-NEXT:    movq {{.*}}(%rip), %rax
+; CHECK-NEXT:    shlq $10, %rdi
+; CHECK-NEXT:    shrq $54, %rax
+; CHECK-NEXT:    leaq (%rax,%rdi), %rax
+; CHECK-NEXT:    movq %rax, {{.*}}(%rip)
+; CHECK-NEXT:    retq
+entry:
+  %a = load i64, i64* @x
+  %shl = shl i64 %b, 10
+  %shr = lshr i64 %a, 54
+  %or = or i64 %shr, %shl
+  store i64 %or, i64* @x
+  ret void
+}
+
+define void @lshift_mem_b_optsize(i64 %b) nounwind readnone optsize {
+; CHECK-LABEL: lshift_mem_b_optsize:
+; CHECK:       # %bb.0: # %entry
+; CHECK-NEXT:    movq {{.*}}(%rip), %rax
+; CHECK-NEXT:    shrdq $54, %rdi, %rax
+; CHECK-NEXT:    movq %rax, {{.*}}(%rip)
+; CHECK-NEXT:    retq
+entry:
+  %a = load i64, i64* @x
+  %shl = shl i64 %b, 10
+  %shr = lshr i64 %a, 54
+  %or = or i64 %shr, %shl
+  store i64 %or, i64* @x
+  ret void
+}
+

test/CodeGen/X86/schedule-x86-64-shld.ll

 ; NOTE: Assertions have been autogenerated by utils/update_llc_test_checks.py
-; RUN: llc < %s -mtriple=x86_64-unknown-unknown -print-schedule -mcpu=x86-64 | FileCheck %s --check-prefix=CHECK --check-prefix=GENERIC
-; RUN: llc < %s -mtriple=x86_64-unknown-unknown -print-schedule -mcpu=btver2 | FileCheck %s --check-prefix=CHECK --check-prefix=BTVER2
-; RUN: llc < %s -mtriple=x86_64-unknown-unknown -print-schedule -mcpu=bdver1 | FileCheck %s --check-prefix=CHECK --check-prefix=BDVER1
+; RUN: llc < %s -mtriple=x86_64-unknown-unknown -mc-shld-enabled -print-schedule -mcpu=x86-64 | FileCheck %s --check-prefix=CHECK --check-prefix=GENERIC
+; RUN: llc < %s -mtriple=x86_64-unknown-unknown -mc-shld-enabled -print-schedule -mcpu=btver2 | FileCheck %s --check-prefix=CHECK --check-prefix=BTVER2
+; RUN: llc < %s -mtriple=x86_64-unknown-unknown -mc-shld-enabled -print-schedule -mcpu=bdver1 | FileCheck %s --check-prefix=CHECK --check-prefix=BDVER1
 
-
-; uint64_t lshift10(uint64_t a, uint64_t b)
 ; {
 ;     return (a << 10) | (b >> 54);
 ; }
 
 define i64 @lshift10_optsize(i64 %a, i64 %b) nounwind readnone optsize {
 ; GENERIC-LABEL: lshift10_optsize:
 ; GENERIC:       # %bb.0: # %entry
 ; GENERIC-NEXT:    shldq $10, %rsi, %rdi # sched: [2:0.67]

 ; GENERIC-LABEL: lshift10:
 ; GENERIC:       # %bb.0: # %entry
 ; GENERIC-NEXT:    shldq $10, %rsi, %rdi # sched: [2:0.67]
 ; GENERIC-NEXT:    movq %rdi, %rax # sched: [1:0.33]
 ; GENERIC-NEXT:    retq # sched: [1:1.00]
 ;
 ; BTVER2-LABEL: lshift10:
 ; BTVER2:       # %bb.0: # %entry
-; BTVER2-NEXT:    shlq $10, %rdi # sched: [1:0.50]
-; BTVER2-NEXT:    shrq $54, %rsi # sched: [1:0.50]
-; BTVER2-NEXT:    leaq (%rsi,%rdi), %rax # sched: [1:0.50]
+; BTVER2-NEXT:    shldq $10, %rsi, %rdi # sched: [3:3.00]
+; BTVER2-NEXT:    movq %rdi, %rax # sched: [1:0.50]
 ; BTVER2-NEXT:    retq # sched: [4:1.00]
 ;
 ; BDVER1-LABEL: lshift10:
 ; BDVER1:       # %bb.0: # %entry
 ; BDVER1-NEXT:    shlq $10, %rdi
 ; BDVER1-NEXT:    shrq $54, %rsi
 ; BDVER1-NEXT:    leaq (%rsi,%rdi), %rax
 ; BDVER1-NEXT:    retq

 ; GENERIC-LABEL: rshift10:
 ; GENERIC:       # %bb.0: # %entry
 ; GENERIC-NEXT:    shrdq $62, %rsi, %rdi # sched: [2:0.67]
 ; GENERIC-NEXT:    movq %rdi, %rax # sched: [1:0.33]
 ; GENERIC-NEXT:    retq # sched: [1:1.00]
 ;
 ; BTVER2-LABEL: rshift10:
 ; BTVER2:       # %bb.0: # %entry
-; BTVER2-NEXT:    shrq $62, %rdi # sched: [1:0.50]
-; BTVER2-NEXT:    leaq (%rdi,%rsi,4), %rax # sched: [1:0.50]
+; BTVER2-NEXT:    shrdq $62, %rsi, %rdi # sched: [3:3.00]
+; BTVER2-NEXT:    movq %rdi, %rax # sched: [1:0.50]
 ; BTVER2-NEXT:    retq # sched: [4:1.00]
 ;
 ; BDVER1-LABEL: rshift10:
 ; BDVER1:       # %bb.0: # %entry
 ; BDVER1-NEXT:    shrq $62, %rdi
 ; BDVER1-NEXT:    leaq (%rdi,%rsi,4), %rax
 ; BDVER1-NEXT:    retq
 entry:

 ; GENERIC-NEXT:    movl %edx, %ecx # sched: [1:0.33]
 ; GENERIC-NEXT:    shldq %cl, %rsi, %rdi # sched: [4:1.50]
 ; GENERIC-NEXT:    movq %rdi, %rax # sched: [1:0.33]
 ; GENERIC-NEXT:    retq # sched: [1:1.00]
 ;
 ; BTVER2-LABEL: lshift_cl:
 ; BTVER2:       # %bb.0: # %entry
 ; BTVER2-NEXT:    movl %edx, %ecx # sched: [1:0.50]
-; BTVER2-NEXT:    shlq %cl, %rdi # sched: [1:0.50]
-; BTVER2-NEXT:    movl $64, %ecx # sched: [1:0.50]
-; BTVER2-NEXT:    subl %edx, %ecx # sched: [1:0.50]
-; BTVER2-NEXT:    # kill: def $cl killed $cl killed $ecx
-; BTVER2-NEXT:    shrq %cl, %rsi # sched: [1:0.50]
-; BTVER2-NEXT:    orq %rdi, %rsi # sched: [1:0.50]
-; BTVER2-NEXT:    movq %rsi, %rax # sched: [1:0.50]
+; BTVER2-NEXT:    shldq %cl, %rsi, %rdi # sched: [4:4.00]
+; BTVER2-NEXT:    movq %rdi, %rax # sched: [1:0.50]
 ; BTVER2-NEXT:    retq # sched: [4:1.00]
 ;
 ; BDVER1-LABEL: lshift_cl:
 ; BDVER1:       # %bb.0: # %entry
 ; BDVER1-NEXT:    movl %edx, %ecx
 ; BDVER1-NEXT:    shlq %cl, %rdi
 ; BDVER1-NEXT:    movl $64, %ecx
 ; BDVER1-NEXT:    subl %edx, %ecx

 ; GENERIC-NEXT:    movl %edx, %ecx # sched: [1:0.33]
 ; GENERIC-NEXT:    shrdq %cl, %rsi, %rdi # sched: [4:1.50]
 ; GENERIC-NEXT:    movq %rdi, %rax # sched: [1:0.33]
 ; GENERIC-NEXT:    retq # sched: [1:1.00]
 ;
 ; BTVER2-LABEL: rshift_cl:
 ; BTVER2:       # %bb.0: # %entry
 ; BTVER2-NEXT:    movl %edx, %ecx # sched: [1:0.50]
-; BTVER2-NEXT:    shrq %cl, %rdi # sched: [1:0.50]
-; BTVER2-NEXT:    movl $64, %ecx # sched: [1:0.50]
-; BTVER2-NEXT:    subl %edx, %ecx # sched: [1:0.50]
-; BTVER2-NEXT:    # kill: def $cl killed $cl killed $ecx
-; BTVER2-NEXT:    shlq %cl, %rsi # sched: [1:0.50]
-; BTVER2-NEXT:    orq %rdi, %rsi # sched: [1:0.50]
-; BTVER2-NEXT:    movq %rsi, %rax # sched: [1:0.50]
+; BTVER2-NEXT:    shrdq %cl, %rsi, %rdi # sched: [4:4.00]
+; BTVER2-NEXT:    movq %rdi, %rax # sched: [1:0.50]
 ; BTVER2-NEXT:    retq # sched: [4:1.00]
 ;
 ; BDVER1-LABEL: rshift_cl:
 ; BDVER1:       # %bb.0: # %entry
 ; BDVER1-NEXT:    movl %edx, %ecx
 ; BDVER1-NEXT:    shrq %cl, %rdi
 ; BDVER1-NEXT:    movl $64, %ecx
 ; BDVER1-NEXT:    subl %edx, %ecx

 ; GENERIC-LABEL: lshift_mem_cl:
 ; GENERIC:       # %bb.0: # %entry
 ; GENERIC-NEXT:    movl %esi, %ecx # sched: [1:0.33]
 ; GENERIC-NEXT:    shldq %cl, %rdi, {{.*}}(%rip) # sched: [10:1.50]
 ; GENERIC-NEXT:    retq # sched: [1:1.00]
 ;
 ; BTVER2-LABEL: lshift_mem_cl:
 ; BTVER2:       # %bb.0: # %entry
-; BTVER2-NEXT:    movq {{.*}}(%rip), %rax # sched: [5:1.00]
 ; BTVER2-NEXT:    movl %esi, %ecx # sched: [1:0.50]
-; BTVER2-NEXT:    shlq %cl, %rax # sched: [1:0.50]
-; BTVER2-NEXT:    movl $64, %ecx # sched: [1:0.50]
-; BTVER2-NEXT:    subl %esi, %ecx # sched: [1:0.50]
-; BTVER2-NEXT:    # kill: def $cl killed $cl killed $ecx
-; BTVER2-NEXT:    shrq %cl, %rdi # sched: [1:0.50]
-; BTVER2-NEXT:    orq %rax, %rdi # sched: [1:0.50]
-; BTVER2-NEXT:    movq %rdi, {{.*}}(%rip) # sched: [1:1.00]
+; BTVER2-NEXT:    shldq %cl, %rdi, {{.*}}(%rip) # sched: [9:11.00]
 ; BTVER2-NEXT:    retq # sched: [4:1.00]
 ;
 ; BDVER1-LABEL: lshift_mem_cl:
 ; BDVER1:       # %bb.0: # %entry
 ; BDVER1-NEXT:    movq {{.*}}(%rip), %rax
 ; BDVER1-NEXT:    movl %esi, %ecx
 ; BDVER1-NEXT:    shlq %cl, %rax
 ; BDVER1-NEXT:    movl $64, %ecx

 define void @lshift_mem(i64 %a) nounwind readnone {
 ; GENERIC-LABEL: lshift_mem:
 ; GENERIC:       # %bb.0: # %entry
 ; GENERIC-NEXT:    shldq $10, %rdi, {{.*}}(%rip) # sched: [8:1.00]
 ; GENERIC-NEXT:    retq # sched: [1:1.00]
 ;
 ; BTVER2-LABEL: lshift_mem:
 ; BTVER2:       # %bb.0: # %entry
-; BTVER2-NEXT:    movq {{.*}}(%rip), %rax # sched: [5:1.00]
-; BTVER2-NEXT:    shrq $54, %rdi # sched: [1:0.50]
-; BTVER2-NEXT:    shlq $10, %rax # sched: [1:0.50]
-; BTVER2-NEXT:    orq %rax, %rdi # sched: [1:0.50]
-; BTVER2-NEXT:    movq %rdi, {{.*}}(%rip) # sched: [1:1.00]
+; BTVER2-NEXT:    shldq $10, %rdi, {{.*}}(%rip) # sched: [9:11.00]
 ; BTVER2-NEXT:    retq # sched: [4:1.00]
 ;
 ; BDVER1-LABEL: lshift_mem:
 ; BDVER1:       # %bb.0: # %entry
 ; BDVER1-NEXT:    movq {{.*}}(%rip), %rax
 ; BDVER1-NEXT:    shlq $10, %rax
 ; BDVER1-NEXT:    shrq $54, %rdi
 ; BDVER1-NEXT:    orq %rax, %rdi
entry:
   store i64 %or, i64* @x
   ret void
 }
 
 define void @lshift_mem_b(i64 %b) nounwind readnone {
 ; GENERIC-LABEL: lshift_mem_b:
 ; GENERIC:       # %bb.0: # %entry
 ; GENERIC-NEXT:    movq {{.*}}(%rip), %rax # sched: [5:0.50]
-; GENERIC-NEXT:    shrdq $54, %rdi, %rax # sched: [2:0.67]
+; GENERIC-NEXT:    shlq $10, %rdi # sched: [1:0.50]
+; GENERIC-NEXT:    shrq $54, %rax # sched: [1:0.50]
+; GENERIC-NEXT:    leaq (%rax,%rdi), %rax # sched: [1:0.50]
 ; GENERIC-NEXT:    movq %rax, {{.*}}(%rip) # sched: [5:1.00]
 ; GENERIC-NEXT:    retq # sched: [1:1.00]
 ;
 ; BTVER2-LABEL: lshift_mem_b:
 ; BTVER2:       # %bb.0: # %entry
 ; BTVER2-NEXT:    movq {{.*}}(%rip), %rax # sched: [5:1.00]
 ; BTVER2-NEXT:    shlq $10, %rdi # sched: [1:0.50]
 ; BTVER2-NEXT:    shrq $54, %rax # sched: [1:0.50]
-; BTVER2-NEXT:    orq %rdi, %rax # sched: [1:0.50]
+; BTVER2-NEXT:    leaq (%rax,%rdi), %rax # sched: [1:0.50]
 ; BTVER2-NEXT:    movq %rax, {{.*}}(%rip) # sched: [1:1.00]
 ; BTVER2-NEXT:    retq # sched: [4:1.00]
 ;
 ; BDVER1-LABEL: lshift_mem_b:
 ; BDVER1:       # %bb.0: # %entry
 ; BDVER1-NEXT:    movq {{.*}}(%rip), %rax
 ; BDVER1-NEXT:    shlq $10, %rdi
 ; BDVER1-NEXT:    shrq $54, %rax
 ; BDVER1-NEXT:    orq %rdi, %rax
 ; BDVER1-NEXT:    movq %rax, {{.*}}(%rip)
 ; BDVER1-NEXT:    retq
+
 entry:
   %a = load i64, i64* @x
   %shl = shl i64 %b, 10
   %shr = lshr i64 %a, 54
   %or = or i64 %shr, %shl
   store i64 %or, i64* @x
   ret void
 }
 
+; uint64_t lshift10(uint64_t a, uint64_t b)
+
 define void @lshift_mem_b_optsize(i64 %b) nounwind readnone optsize {
 ; GENERIC-LABEL: lshift_mem_b_optsize:
 ; GENERIC:       # %bb.0: # %entry
 ; GENERIC-NEXT:    movq {{.*}}(%rip), %rax # sched: [5:0.50]
 ; GENERIC-NEXT:    shrdq $54, %rdi, %rax # sched: [2:0.67]
 ; GENERIC-NEXT:    movq %rax, {{.*}}(%rip) # sched: [5:1.00]
 ; GENERIC-NEXT:    retq # sched: [1:1.00]
 ;