AMDGPU: Select 64-bit {ADD,SUB}{C,E} nodes

[nhaehnle]

Summary

This will be used for 64-bit MULHU, which is in turn used for the 64-bit
divide-by-constant optimization (see D24822).

[arsenm]

Would a test that uses add/sub i128 show this?

[nhaehnle]

Indeed it is possible. Adding 128-bit add tests.

[arsenm]

LGTM. BTW are the UADDO/SADDO semantically the same as ADDC/SUBB except for how the carry out is represented? I've wanted to stop expanding those

llvm/trunk/lib/Target/AMDGPU/AMDGPUISelDAGToDAG.cpp

if (isa<AtomicSDNode>(N) ||
     N = glueCopyToM0(N);
 
   switch (Opc) {
   default: break;
   // We are selecting i64 ADD here instead of custom lower it during
   // DAG legalization, so we can fold some i64 ADDs used for address
   // calculation into the LOAD and STORE instructions.
   case ISD::ADD:
-  case ISD::SUB: {
+  case ISD::ADDC:
+  case ISD::ADDE:
+  case ISD::SUB:
+  case ISD::SUBC:
+  case ISD::SUBE: {
     if (N->getValueType(0) != MVT::i64 ||
         Subtarget->getGeneration() < AMDGPUSubtarget::SOUTHERN_ISLANDS)
       break;
 
     SelectADD_SUB_I64(N);
     return;
   }
   case ISD::SCALAR_TO_VECTOR:
bool AMDGPUDAGToDAGISel::SelectADDRIndirect(SDValue Addr, SDValue &Base,
   return true;
 }
 
 void AMDGPUDAGToDAGISel::SelectADD_SUB_I64(SDNode *N) {
   SDLoc DL(N);
   SDValue LHS = N->getOperand(0);
   SDValue RHS = N->getOperand(1);
 
-  bool IsAdd = (N->getOpcode() == ISD::ADD);
+  unsigned Opcode = N->getOpcode();
+  bool ConsumeCarry = (Opcode == ISD::ADDE || Opcode == ISD::SUBE);
+  bool ProduceCarry =
+      ConsumeCarry || Opcode == ISD::ADDC || Opcode == ISD::SUBC;
+  bool IsAdd =
+      (Opcode == ISD::ADD || Opcode == ISD::ADDC || Opcode == ISD::ADDE);
 
   SDValue Sub0 = CurDAG->getTargetConstant(AMDGPU::sub0, DL, MVT::i32);
   SDValue Sub1 = CurDAG->getTargetConstant(AMDGPU::sub1, DL, MVT::i32);
 
   SDNode *Lo0 = CurDAG->getMachineNode(TargetOpcode::EXTRACT_SUBREG,
                                        DL, MVT::i32, LHS, Sub0);
   SDNode *Hi0 = CurDAG->getMachineNode(TargetOpcode::EXTRACT_SUBREG,
                                        DL, MVT::i32, LHS, Sub1);
 
   SDNode *Lo1 = CurDAG->getMachineNode(TargetOpcode::EXTRACT_SUBREG,
                                        DL, MVT::i32, RHS, Sub0);
   SDNode *Hi1 = CurDAG->getMachineNode(TargetOpcode::EXTRACT_SUBREG,
                                        DL, MVT::i32, RHS, Sub1);
 
   SDVTList VTList = CurDAG->getVTList(MVT::i32, MVT::Glue);
-  SDValue AddLoArgs[] = { SDValue(Lo0, 0), SDValue(Lo1, 0) };
 
   unsigned Opc = IsAdd ? AMDGPU::S_ADD_U32 : AMDGPU::S_SUB_U32;
   unsigned CarryOpc = IsAdd ? AMDGPU::S_ADDC_U32 : AMDGPU::S_SUBB_U32;
 
-  SDNode *AddLo = CurDAG->getMachineNode( Opc, DL, VTList, AddLoArgs);
-  SDValue Carry(AddLo, 1);
-  SDNode *AddHi
-    = CurDAG->getMachineNode(CarryOpc, DL, MVT::i32,
-                             SDValue(Hi0, 0), SDValue(Hi1, 0), Carry);
+  SDNode *AddLo;
+  if (!ConsumeCarry) {
+    SDValue Args[] = { SDValue(Lo0, 0), SDValue(Lo1, 0) };
+    AddLo = CurDAG->getMachineNode(Opc, DL, VTList, Args);
+  } else {
+    SDValue Args[] = { SDValue(Lo0, 0), SDValue(Lo1, 0), N->getOperand(2) };
+    AddLo = CurDAG->getMachineNode(CarryOpc, DL, VTList, Args);
+  }
+  SDValue AddHiArgs[] = {
+    SDValue(Hi0, 0),
+    SDValue(Hi1, 0),
+    SDValue(AddLo, 1)
+  };
+  SDNode *AddHi = CurDAG->getMachineNode(CarryOpc, DL, VTList, AddHiArgs);
 
-  SDValue Args[5] = {
+  SDValue RegSequenceArgs[] = {
     CurDAG->getTargetConstant(AMDGPU::SReg_64RegClassID, DL, MVT::i32),
     SDValue(AddLo,0),
     Sub0,
     SDValue(AddHi,0),
     Sub1,
   };
-  CurDAG->SelectNodeTo(N, AMDGPU::REG_SEQUENCE, MVT::i64, Args);
+  SDNode *RegSequence = CurDAG->getMachineNode(AMDGPU::REG_SEQUENCE, DL,
+                                               MVT::i64, RegSequenceArgs);
+
+  if (ProduceCarry) {
+    // Replace the carry-use
+    CurDAG->ReplaceAllUsesOfValueWith(SDValue(N, 1), SDValue(AddHi, 1));
+  }
+
+  // Replace the remaining uses.
+  CurDAG->ReplaceAllUsesWith(N, RegSequence);
+  CurDAG->RemoveDeadNode(N);
 }
 
 // We need to handle this here because tablegen doesn't support matching
 // instructions with multiple outputs.
 void AMDGPUDAGToDAGISel::SelectDIV_SCALE(SDNode *N) {
   SDLoc SL(N);
   EVT VT = N->getValueType(0);
 

llvm/trunk/test/CodeGen/AMDGPU/add_i128.ll

+; RUN: llc -march=amdgcn -verify-machineinstrs < %s | FileCheck -check-prefix=GCN %s
+
+; GCN-LABEL: {{^}}test_i128_vreg:
+; GCN: v_add_i32_e32 v[[LO:[0-9]+]], vcc,
+; GCN-NEXT: v_addc_u32_e32 v{{[0-9]+}}, vcc, v{{[0-9]+}}, v{{[0-9]+}}, vcc
+; GCN-NEXT: v_addc_u32_e32 v{{[0-9]+}}, vcc, v{{[0-9]+}}, v{{[0-9]+}}, vcc
+; GCN-NEXT: v_addc_u32_e32 v[[HI:[0-9]+]], vcc, v{{[0-9]+}}, v{{[0-9]+}}, vcc
+; GCN: buffer_store_dwordx4 v{{\[}}[[LO]]:[[HI]]],
+define void @test_i128_vreg(i128 addrspace(1)* noalias %out, i128 addrspace(1)* noalias %inA, i128 addrspace(1)* noalias %inB) {
+  %tid = call i32 @llvm.amdgcn.workitem.id.x() readnone
+  %a_ptr = getelementptr i128, i128 addrspace(1)* %inA, i32 %tid
+  %b_ptr = getelementptr i128, i128 addrspace(1)* %inB, i32 %tid
+  %a = load i128, i128 addrspace(1)* %a_ptr
+  %b = load i128, i128 addrspace(1)* %b_ptr
+  %result = add i128 %a, %b
+  store i128 %result, i128 addrspace(1)* %out
+  ret void
+}
+
+; Check that the SGPR add operand is correctly moved to a VGPR.
+; GCN-LABEL: {{^}}sgpr_operand:
+; GCN: v_add_i32
+; GCN: v_addc_u32
+; GCN: v_addc_u32
+; GCN: v_addc_u32
+define void @sgpr_operand(i128 addrspace(1)* noalias %out, i128 addrspace(1)* noalias %in, i128 %a) {
+  %foo = load i128, i128 addrspace(1)* %in, align 8
+  %result = add i128 %foo, %a
+  store i128 %result, i128 addrspace(1)* %out
+  ret void
+}
+
+; GCN-LABEL: {{^}}sgpr_operand_reversed:
+; GCN: v_add_i32
+; GCN: v_addc_u32
+; GCN: v_addc_u32
+; GCN: v_addc_u32
+define void @sgpr_operand_reversed(i128 addrspace(1)* noalias %out, i128 addrspace(1)* noalias %in, i128 %a) {
+  %foo = load i128, i128 addrspace(1)* %in, align 8
+  %result = add i128 %a, %foo
+  store i128 %result, i128 addrspace(1)* %out
+  ret void
+}
+
+; GCN-LABEL: {{^}}test_sreg:
+; GCN: s_add_u32
+; GCN: s_addc_u32
+; GCN: s_addc_u32
+; GCN: s_addc_u32
+define void @test_sreg(i128 addrspace(1)* noalias %out, i128 %a, i128 %b) {
+  %result = add i128 %a, %b
+  store i128 %result, i128 addrspace(1)* %out
+  ret void
+}
+
+declare i32 @llvm.amdgcn.workitem.id.x() readnone