[SLP]Improve stores vectorization.

[ABataev]

Summary

Use O(nlogn) instead of O(N2) (N <= 32) sorting approach and do not try
to revectorize all possible combinations of stores, if they
definitely cannot be combined because of mem/data dependencies.
Compile time (O3 + lto, skylake_avx512):
External/SPEC/CINT2006/483.xalancbmk/483.xalancbmk.test 117.15 120.11 2.5%
External/SPEC/CINT2017speed/623.xalancbmk_s/623.xalancbmk_s.test 203.67 207.42 1.8%
External/SPEC/CFP2017rate/526.blender_r/526.blender_r.test 232.43 235.01 1.1%
External/SPEC/CINT2017rate/523.xalancbmk_r/523.xalancbmk_r.test 205.49 207.25 0.9%
External/SPEC/CFP2017rate/510.parest_r/510.parest_r.test 310.46 306.23 -1.4%

Link time (O3+lto, skylake_avx512):
External/SPEC/CFP2017rate/526.blender_r/526.blender_r.test 1383.69 1475.94 6.7%

Other changes are too small, cannot rely on them.

size..text
Program size..text

                                                                         results     results0    diff
      test-suite :: SingleSource/Regression/C/Regression-C-sumarray.test      392.00     1439.00 267.1%
            test-suite :: MultiSource/Applications/JM/ldecod/ldecod.test   394258.00   394818.00   0.1%
            test-suite :: MultiSource/Applications/JM/lencod/lencod.test   846355.00   847075.00   0.1%
       test-suite :: External/SPEC/CINT2006/464.h264ref/464.h264ref.test   782816.00   783360.00   0.1%
      test-suite :: External/SPEC/CFP2017rate/508.namd_r/508.namd_r.test   779667.00   779923.00   0.0%
          test-suite :: MultiSource/Benchmarks/mafft/pairlocalalign.test   224398.00   224446.00   0.0%
               test-suite :: MultiSource/Applications/oggenc/oggenc.test   185019.00   185035.00   0.0%
test-suite :: External/SPEC/CFP2017rate/526.blender_r/526.blender_r.test 12487610.00 12488010.00   0.0%
           test-suite :: MultiSource/Benchmarks/7zip/7zip-benchmark.test  1051772.00  1051804.00   0.0%
                 test-suite :: MultiSource/Applications/SPASS/SPASS.test   529586.00   529602.00   0.0%
   test-suite :: External/SPEC/CINT2006/400.perlbench/400.perlbench.test  1084684.00  1084716.00   0.0%
         test-suite :: MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4.test  1014245.00  1014261.00   0.0%

 test-suite :: MultiSource/Benchmarks/MallocBench/espresso/espresso.test   223494.00   223478.00  -0.0%
    test-suite :: External/SPEC/CINT2017speed/625.x264_s/625.x264_s.test   660843.00   660795.00  -0.0%
     test-suite :: External/SPEC/CINT2017rate/525.x264_r/525.x264_r.test   660843.00   660795.00  -0.0%
             test-suite :: MultiSource/Applications/ClamAV/clamscan.test   568824.00   568760.00  -0.0%

espresso - 2 more stores vectorized
x264 - small number of changes in 3-4 functions, generated a bit more
vector stores (2 4x zeroinitializer stores + some other small variations).
clamscan - emitted 32xi8 store instead of several scalar stores + several 4x-8x stores.

[vdmitrie]

llvm/lib/Transforms/Vectorize/SLPVectorizer.cpp

12437–12438

Please add a description of what is stored in the set.

12438

Could you please specify actual type of the argument here and also add some description (and specifically what captured data it updates)?

12531

Need a description of what is stored in the container, a quick intro of how to interpret data.

12532

Please add a description of the lambda?

12580

I believe we can avoid abusing this c++ feature here. This is okay for template libraries for reason but here it makes very difficult to read code as it forcing to wade in code in search for the actual type.

[ABataev]

Rebase + address comments

[vdmitrie]

Thanks for the update, Alexey. It was very much helpful.
I just have few questions

llvm/lib/Transforms/Vectorize/SLPVectorizer.cpp

12448–12454

How about the following?

"Distance to the first store in the set"
-->
"Distance of the store address relative to base store address"

whether distance is measured in units or bytes? (condition check "Data.second - PrevDist == 1" suggests units).

12523–12577

May I suggest to rewrite:
"first index of the store in the Stores, set for store index/dist to the very first store"
-->
"first: index of the store into Stores array ref, address of which taken as base,
second: sorted set of pairs {index, dist}, which are indices of stores in the set and their
store location distances relative to the base address." ?

Since "fist index" is perhaps the index of store we started analysis with but it can actually end up not the first in the set (like in your example where it is the last one).

12542–12543

I'd expect the element should actually be like this (if I understand it correctly):
{5, {4, -3}, {2, -2}, {3, -1}, {5, 0}}

hence should try to vectorize "4,2,3,5"
Or sequence in the example should be:

// 1. store x, %p
// 2. store y, %p+2
// 3. store z, %p+1
// 4. store a, %p
// 5. store b, %p+3

Could you please confirm there is a typo here or clarify otherwise?
btw, extra {} would be bit more helpful too: {5, {{4, -3}, {2, -2}, {3, -1}, {5, 0}}}

12552–12554

Hm, I'm confused. "comes after" means store location comes after or "index in the Stores comes after"?
From the code it looks like the latter (as store indices are compared).
Besides, #4 has already been vectorized. Why we would even consider it?

And in either case it is not clear how #5 (%p+3) would come before #4 (%p) ?

Could you please clarify?

[ABataev]

llvm/lib/Transforms/Vectorize/SLPVectorizer.cpp

12448–12454

In units

12542–12543

Yes, it was a typo.

12552–12554

1. Here comes after - comes after in the order, we process stores (we process them in reverse order).

2. > Besides, #4 has already been vectorized. Why we would even consider it? This store still exist in LLVM IR (will be removed in SLP destrutor), though marked for the deletion. #4 just have the same distance to the base address and this is a mark, that we need to start a new stores sequence, because we have a conflict of distances (it does not matter, actually, if #4 is vectorized or not).

So, for #4 we try to vectorize sequence {2,3,4,5}, for #1 - only {1,2,3} (if #3 was not vectorized) or {1,2} ( if #3 was vectorized), because most likely #5 'depends' (in some way, not directly, but from the programmers logic, this most likely may happen after loop unrolling) on the store #4. And we can exclude it from the chain for #1 to save compile time.

3. It comes before in the reverse order, we process stores.

[ABataev]

Rebase + address comments

[vdmitrie]

llvm/lib/Transforms/Vectorize/SLPVectorizer.cpp

12549

Should the sequence be "4,2,3,5" ? Otherwise it does not match the element.
Could you please also check accuracy of the comment after this point. It looks like the original typo caused some inaccuracy.
For example, I'd expect #3 and #5 might not vectorize (as a tail) but not #2 and #5 (since #4 and #3 are not unit stride stores).

12552–12554

Here you operate (and refer) with indices into Stores array ref and it was not quite obvious that you rely on the fact that stores order in the array ref actually directly related to the order they come in input IR. Thanks for explanation.

I actually was not worried about accessing a deleted instruction (I know that SLP delays their actual removal).
The question was related to this part of the code:

if (Pair.first <= It->first ||
    VectorizedStores.contains(Stores[Pair.first]))
  break;

[ABataev]

llvm/lib/Transforms/Vectorize/SLPVectorizer.cpp

12552–12554

Yep, this code check if the store was already vectorized or comes before the store with the same distance (#4 in the example)

[ABataev]

Rebase

[ABataev]

Address comments

[ABataev]

Rebase, ping!

[ABataev]

Rebase, ping!

[vdmitrie]

LG

llvm/lib/Transforms/Vectorize/SLPVectorizer.cpp

 static cl::opt<int>
 MaxVectorRegSizeOption("slp-max-reg-size", cl::init(128), cl::Hidden,
     cl::desc("Attempt to vectorize for this register size in bits"));
 
 static cl::opt<unsigned>
 MaxVFOption("slp-max-vf", cl::init(0), cl::Hidden,
     cl::desc("Maximum SLP vectorization factor (0=unlimited)"));
 
-static cl::opt<int>
-MaxStoreLookup("slp-max-store-lookup", cl::init(32), cl::Hidden,
-    cl::desc("Maximum depth of the lookup for consecutive stores."));
-
 /// Limits the size of scheduling regions in a block.
 /// It avoid long compile times for _very_ large blocks where vector
 /// instructions are spread over a wide range.
 /// This limit is way higher than needed by real-world functions.
 static cl::opt<int>
 ScheduleRegionSizeBudget("slp-schedule-budget", cl::init(100000), cl::Hidden,
     cl::desc("Limit the size of the SLP scheduling region per block"));
 

 }
 
 bool SLPVectorizerPass::vectorizeStores(ArrayRef<StoreInst *> Stores,
                                         BoUpSLP &R) {
   // We may run into multiple chains that merge into a single chain. We mark the
   // stores that we vectorized so that we don't visit the same store twice.
   BoUpSLP::ValueSet VectorizedStores;
   bool Changed = false;
 
-  int E = Stores.size();
-  SmallBitVector Tails(E, false);
-  int MaxIter = MaxStoreLookup.getValue();
-  SmallVector<std::pair<int, int>, 16> ConsecutiveChain(
-      E, std::make_pair(E, INT_MAX));
-  SmallVector<SmallBitVector, 4> CheckedPairs(E, SmallBitVector(E, false));
-  int IterCnt;
-  auto &&FindConsecutiveAccess = [this, &Stores, &Tails, &IterCnt, MaxIter,
-                                  &CheckedPairs,
-                                  &ConsecutiveChain](int K, int Idx) {
-    if (IterCnt >= MaxIter)
-      return true;
-    if (CheckedPairs[Idx].test(K))
-      return ConsecutiveChain[K].second == 1 &&
-             ConsecutiveChain[K].first == Idx;
-    ++IterCnt;
-    CheckedPairs[Idx].set(K);
-    CheckedPairs[K].set(Idx);
-    std::optional<int> Diff = getPointersDiff(
-        Stores[K]->getValueOperand()->getType(), Stores[K]->getPointerOperand(),
-        Stores[Idx]->getValueOperand()->getType(),
-        Stores[Idx]->getPointerOperand(), *DL, *SE, /*StrictCheck=*/true);
-    if (!Diff || *Diff == 0)
-      return false;
-    int Val = *Diff;
-    if (Val < 0) {
-      if (ConsecutiveChain[Idx].second > -Val) {
-        Tails.set(K);
-        ConsecutiveChain[Idx] = std::make_pair(K, -Val);
-      }
-      return false;
-    }
-    if (ConsecutiveChain[K].second <= Val)
-      return false;
-
-    Tails.set(Idx);
-    ConsecutiveChain[K] = std::make_pair(Idx, Val);
-    return Val == 1;
-  };
-  // Do a quadratic search on all of the given stores in reverse order and find
-  // all of the pairs of stores that follow each other.
-  for (int Idx = E - 1; Idx >= 0; --Idx) {
-    // If a store has multiple consecutive store candidates, search according
-    // to the sequence: Idx-1, Idx+1, Idx-2, Idx+2, ...
-    // This is because usually pairing with immediate succeeding or preceding
-    // candidate create the best chance to find slp vectorization opportunity.
-    const int MaxLookDepth = std::max(E - Idx, Idx + 1);
-    IterCnt = 0;
-    for (int Offset = 1, F = MaxLookDepth; Offset < F; ++Offset)
-      if ((Idx >= Offset && FindConsecutiveAccess(Idx - Offset, Idx)) ||
-          (Idx + Offset < E && FindConsecutiveAccess(Idx + Offset, Idx)))
-        break;
-  }
-
-  // Tracks if we tried to vectorize stores starting from the given tail
-  // already.
-  SmallBitVector TriedTails(E, false);
-  // For stores that start but don't end a link in the chain:
-  for (int Cnt = E; Cnt > 0; --Cnt) {
-    int I = Cnt - 1;
-    if (ConsecutiveChain[I].first == E || Tails.test(I))
-      continue;
-    // We found a store instr that starts a chain. Now follow the chain and try
-    // to vectorize it.
+  // Stores the pair of stores (first_store, last_store) in a range, that were
+  // already tried to be vectorized. Allows to skip the store ranges that were
+  // already tried to be vectorized but the attempts were unsuccessful.
+  DenseSet<std::pair<Value *, Value *>> TriedSequences;
+  struct StoreDistCompare {
+    bool operator()(const std::pair<unsigned, int> &Op1,
+                    const std::pair<unsigned, int> &Op2) const {
+      return Op1.second < Op2.second;
+    }
+  };
+  // A set of pairs (index of store in Stores array ref, Distance of the store
+  // address relative to base store address in units).
+  using StoreIndexToDistSet =
+      std::set<std::pair<unsigned, int>, StoreDistCompare>;
+  auto TryToVectorize = [&](const StoreIndexToDistSet &Set) {
+    int PrevDist = -1;
     BoUpSLP::ValueList Operands;
     // Collect the chain into a list.
-    while (I != E && !VectorizedStores.count(Stores[I])) {
-      Operands.push_back(Stores[I]);
-      Tails.set(I);
-      if (ConsecutiveChain[I].second != 1) {
-        // Mark the new end in the chain and go back, if required. It might be
-        // required if the original stores come in reversed order, for example.
-        if (ConsecutiveChain[I].first != E &&
-            Tails.test(ConsecutiveChain[I].first) && !TriedTails.test(I) &&
-            !VectorizedStores.count(Stores[ConsecutiveChain[I].first])) {
-          TriedTails.set(I);
-          Tails.reset(ConsecutiveChain[I].first);
-          if (Cnt < ConsecutiveChain[I].first + 2)
-            Cnt = ConsecutiveChain[I].first + 2;
-        }
-        break;
+    for (auto [Idx, Data] : enumerate(Set)) {
+      if (Operands.empty() || Data.second - PrevDist == 1) {
+        Operands.push_back(Stores[Data.first]);
+        PrevDist = Data.second;
+        if (Idx != Set.size() - 1)
+          continue;
       }
-      // Move to the next value in the chain.
-      I = ConsecutiveChain[I].first;
+      if (Operands.size() <= 1) {
+        Operands.clear();
+        Operands.push_back(Stores[Data.first]);
+        PrevDist = Data.second;
+        continue;
       }
-    assert(!Operands.empty() && "Expected non-empty list of stores.");
 
       unsigned MaxVecRegSize = R.getMaxVecRegSize();
       unsigned EltSize = R.getVectorElementSize(Operands[0]);
       unsigned MaxElts = llvm::bit_floor(MaxVecRegSize / EltSize);
 
-    unsigned MaxVF = std::min(R.getMaximumVF(EltSize, Instruction::Store),
-                              MaxElts);
+      unsigned MaxVF =
+          std::min(R.getMaximumVF(EltSize, Instruction::Store), MaxElts);
       auto *Store = cast<StoreInst>(Operands[0]);
       Type *StoreTy = Store->getValueOperand()->getType();
       Type *ValueTy = StoreTy;
       if (auto *Trunc = dyn_cast<TruncInst>(Store->getValueOperand()))
         ValueTy = Trunc->getSrcTy();
       unsigned MinVF = TTI->getStoreMinimumVF(
           R.getMinVF(DL->getTypeSizeInBits(ValueTy)), StoreTy, ValueTy);
 
       if (MaxVF <= MinVF) {
-      LLVM_DEBUG(dbgs() << "SLP: Vectorization infeasible as MaxVF (" << MaxVF << ") <= "
+        LLVM_DEBUG(dbgs() << "SLP: Vectorization infeasible as MaxVF (" << MaxVF
+                          << ") <= "
                           << "MinVF (" << MinVF << ")\n");
       }
 
       // FIXME: Is division-by-2 the correct step? Should we assert that the
       // register size is a power-of-2?
       unsigned StartIdx = 0;
       for (unsigned Size = MaxVF; Size >= MinVF; Size /= 2) {
         for (unsigned Cnt = StartIdx, E = Operands.size(); Cnt + Size <= E;) {
           ArrayRef<Value *> Slice = ArrayRef(Operands).slice(Cnt, Size);
           if (!VectorizedStores.count(Slice.front()) &&
               !VectorizedStores.count(Slice.back()) &&
+              TriedSequences.insert(std::make_pair(Slice.front(), Slice.back()))
+                  .second &&
               vectorizeStoreChain(Slice, R, Cnt, MinVF)) {
             // Mark the vectorized stores so that we don't vectorize them again.
             VectorizedStores.insert(Slice.begin(), Slice.end());
             Changed = true;
             // If we vectorized initial block, no need to try to vectorize it
             // again.
             if (Cnt == StartIdx)
               StartIdx += Size;
             Cnt += Size;
             continue;
           }
           ++Cnt;
         }
         // Check if the whole array was vectorized already - exit.
         if (StartIdx >= Operands.size())
           break;
       }
+      Operands.clear();
+      Operands.push_back(Stores[Data.first]);
+      PrevDist = Data.second;
+    }
+  };
+
+  // Stores pair (first: index of the store into Stores array ref, address of
+  // which taken as base, second: sorted set of pairs {index, dist}, which are
+  // indices of stores in the set and their store location distances relative to
+  // the base address).
+
+  // Need to store the index of the very first store separately, since the set
+  // may be reordered after the insertion and the first store may be moved. This
+  // container allows to reduce number of calls of getPointersDiff() function.
+  SmallVector<std::pair<unsigned, StoreIndexToDistSet>> SortedStores;
+  // Inserts the specified store SI with the given index Idx to the set of the
+  // stores. If the store with the same distance is found already - stop
+  // insertion, try to vectorize already found stores. If some stores from this
+  // sequence were not vectorized - try to vectorize them with the new store
+  // later. But this logic is applied only to the stores, that come before the
+  // previous store with the same distance.
+  // Example:
+  // 1. store x, %p
+  // 2. store y, %p+1
+  // 3. store z, %p+2
+  // 4. store a, %p
+  // 5. store b, %p+3
+  // - Scan this from the last to first store. The very first bunch of stores is
+  // {5, {{4, -3}, {2, -2}, {3, -1}, {5, 0}}} (the element in SortedStores
+  // vector).
+  // - The next store in the list - #1 - has the same distance from store #5 as
+  // the store #4.
+  // - Try to vectorize sequence of stores 4,2,3,5.
+  // - If all these stores are vectorized - just drop them.
+  // - If some of them are not vectorized (say, #3 and #5), do extra analysis.
+  // - Start new stores sequence.
+  // The new bunch of stores is {1, {1, 0}}.
+  // - Add the stores from previous sequence, that were not vectorized.
+  // Here we consider the stores in the reversed order, rather they are used in
+  // the IR (Stores are reversed already, see vectorizeStoreChains() function).
+  // Store #3 can be added -> comes after store #4 with the same distance as
+  // store #1.
+  // Store #5 cannot be added - comes before store #4.
+  // This logic allows to improve the compile time, we assume that the stores
+  // after previous store with the same distance most likely have memory
+  // dependencies and no need to waste compile time to try to vectorize them.
+  // - Try to vectorize the sequence {1, {1, 0}, {3, 2}}.
+  auto FillStoresSet = [&](unsigned Idx, StoreInst *SI) {
+    for (auto &Set : SortedStores) {
+      std::optional<int> Diff = getPointersDiff(
+          Stores[Set.first]->getValueOperand()->getType(),
+          Stores[Set.first]->getPointerOperand(),
+          SI->getValueOperand()->getType(), SI->getPointerOperand(), *DL, *SE,
+          /*StrictCheck=*/true);
+      if (!Diff)
+        continue;
+      auto It = Set.second.find(std::make_pair(Idx, *Diff));
+      if (It == Set.second.end()) {
+        Set.second.emplace(Idx, *Diff);
+        return;
+      }
+      // Try to vectorize the first found set to avoid duplicate analysis.
+      TryToVectorize(Set.second);
+      StoreIndexToDistSet PrevSet;
+      PrevSet.swap(Set.second);
+      Set.first = Idx;
+      Set.second.emplace(Idx, 0);
+      // Insert stores that followed previous match to try to vectorize them
+      // with this store.
+      unsigned StartIdx = It->first + 1;
+      SmallBitVector UsedStores(Idx - StartIdx);
+      // Distances to previously found dup store (or this store, since they
+      // store to the same addresses).
+      SmallVector<int> Dists(Idx - StartIdx, 0);
+      for (const std::pair<unsigned, int> &Pair : reverse(PrevSet)) {
+        // Do not try to vectorize sequences, we already tried.
+        if (Pair.first <= It->first ||
+            VectorizedStores.contains(Stores[Pair.first]))
+          break;
+        unsigned BI = Pair.first - StartIdx;
+        UsedStores.set(BI);
+        Dists[BI] = Pair.second - It->second;
+      }
+      for (unsigned I = StartIdx; I < Idx; ++I) {
+        unsigned BI = I - StartIdx;
+        if (BI < UsedStores.size() && UsedStores.test(BI))
+          Set.second.emplace(I, Dists[BI]);
+      }
+      return;
     }
+    auto &Res = SortedStores.emplace_back();
+    Res.first = Idx;
+    Res.second.emplace(Idx, 0);
+  };
+  for (auto [I, SI] : enumerate(Stores))
+    FillStoresSet(I, SI);
+
+  // Final vectorization attempt.
+  for (auto &Set : SortedStores)
+    TryToVectorize(Set.second);
 
   return Changed;
 }
 
 void SLPVectorizerPass::collectSeedInstructions(BasicBlock *BB) {
   // Initialize the collections. We will make a single pass over the block.
   Stores.clear();
   GEPs.clear();
if (Pair.second.size() < 2)
       continue;
 
     LLVM_DEBUG(dbgs() << "SLP: Analyzing a store chain of length "
                       << Pair.second.size() << ".\n");
 
     if (!isValidElementType(Pair.second.front()->getValueOperand()->getType()))
       continue;
 
+    // Reverse stores to do bottom-to-top analysis. This is important if the
+    // values are stores to the same addresses several times, in this case need
+    // to follow the stores order (reversed to meet the memory dependecies).
+    SmallVector<StoreInst *> ReversedStores(Pair.second.rbegin(),
+                                            Pair.second.rend());
     Changed |= tryToVectorizeSequence<StoreInst>(
-        Pair.second, StoreSorter, AreCompatibleStores,
+        ReversedStores, StoreSorter, AreCompatibleStores,
         [this, &R](ArrayRef<StoreInst *> Candidates, bool) {
           return vectorizeStores(Candidates, R);
         },
         /*MaxVFOnly=*/false, R);
   }
   return Changed;
 }

llvm/test/Transforms/SLPVectorizer/X86/many_stores.ll

 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py UTC_ARGS: --version 3
 ; RUN: opt -passes=slp-vectorizer -S -mtriple=x86_64-unknown-linux < %s | FileCheck %s
 
 define i32 @test(ptr %p) {
 ; CHECK-LABEL: define i32 @test
 ; CHECK-SAME: (ptr [[P:%.*]]) {
 ; CHECK-NEXT:  entry:
-; CHECK-NEXT:    [[IDX2:%.*]] = getelementptr i32, ptr [[P]], i64 4
-; CHECK-NEXT:    store i32 0, ptr [[IDX2]], align 4
-; CHECK-NEXT:    [[IDX3:%.*]] = getelementptr i32, ptr [[P]], i64 6
-; CHECK-NEXT:    store i32 0, ptr [[IDX3]], align 4
 ; CHECK-NEXT:    [[IDX4:%.*]] = getelementptr i32, ptr [[P]], i64 8
 ; CHECK-NEXT:    store i32 0, ptr [[IDX4]], align 4
 ; CHECK-NEXT:    [[IDX5:%.*]] = getelementptr i32, ptr [[P]], i64 10
 ; CHECK-NEXT:    store i32 0, ptr [[IDX5]], align 4
 ; CHECK-NEXT:    [[IDX6:%.*]] = getelementptr i32, ptr [[P]], i64 12
 ; CHECK-NEXT:    store i32 0, ptr [[IDX6]], align 4
 ; CHECK-NEXT:    [[IDX7:%.*]] = getelementptr i32, ptr [[P]], i64 14
 ; CHECK-NEXT:    store i32 0, ptr [[IDX7]], align 4

 ; CHECK-NEXT:    [[IDX31:%.*]] = getelementptr i32, ptr [[P]], i64 62
 ; CHECK-NEXT:    store i32 0, ptr [[IDX31]], align 4
 ; CHECK-NEXT:    [[IDX32:%.*]] = getelementptr i32, ptr [[P]], i64 64
 ; CHECK-NEXT:    store i32 0, ptr [[IDX32]], align 4
 ; CHECK-NEXT:    [[IDX33:%.*]] = getelementptr i32, ptr [[P]], i64 66
 ; CHECK-NEXT:    store i32 0, ptr [[IDX33]], align 4
 ; CHECK-NEXT:    store i32 0, ptr [[P]], align 4
 ; CHECK-NEXT:    [[IDX0:%.*]] = getelementptr i32, ptr [[P]], i64 3
-; CHECK-NEXT:    store i32 0, ptr [[IDX0]], align 4
-; CHECK-NEXT:    [[IDX1:%.*]] = getelementptr i32, ptr [[P]], i64 5
-; CHECK-NEXT:    store i32 0, ptr [[IDX1]], align 4
+; CHECK-NEXT:    store <4 x i32> zeroinitializer, ptr [[IDX0]], align 4
 ; CHECK-NEXT:    ret i32 0
 ;
 entry:
   %idx2 = getelementptr i32, ptr %p, i64 4
   store i32 0, ptr %idx2, align 4
   %idx3 = getelementptr i32, ptr %p, i64 6
   store i32 0, ptr %idx3, align 4
   %idx4 = getelementptr i32, ptr %p, i64 8

llvm/test/Transforms/SLPVectorizer/X86/stores-non-ordered.ll

 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
-; RUN: opt < %s -S -mtriple=x86_64-unknown -passes=slp-vectorizer -slp-max-store-lookup=2 -slp-min-reg-size=64 -slp-threshold=-1000 | FileCheck %s
+; RUN: opt < %s -S -mtriple=x86_64-unknown -passes=slp-vectorizer -slp-min-reg-size=64 -slp-threshold=-1000 | FileCheck %s
 
 define i32 @non-ordered-stores(ptr noalias nocapture %in, ptr noalias nocapture %inn, ptr noalias nocapture %out) {
 ; CHECK-LABEL: @non-ordered-stores(
 ; CHECK-NEXT:    [[LOAD_1:%.*]] = load i32, ptr [[IN:%.*]], align 4
 ; CHECK-NEXT:    [[GEP_1:%.*]] = getelementptr inbounds i32, ptr [[IN]], i64 1
 ; CHECK-NEXT:    [[LOAD_2:%.*]] = load i32, ptr [[GEP_1]], align 4
 ; CHECK-NEXT:    [[GEP_2:%.*]] = getelementptr inbounds i32, ptr [[IN]], i64 2
 ; CHECK-NEXT:    [[LOAD_3:%.*]] = load i32, ptr [[GEP_2]], align 4