This is an archive of the discontinued LLVM Phabricator instance.

Differential D80050

[NFC] Run clang-format on ISDOpcodes.h
ClosedPublic

Authored by aeubanks on May 15 2020, 4:31 PM.

Details

Reviewers
efriedma
Commits
rG8092c8fec084: [NFC] Run clang-format on ISDOpcodes.h

Diff Detail

Event Timeline

aeubanks created this revision.May 15 2020, 4:31 PM
Herald added a project: Restricted Project. · View Herald TranscriptMay 15 2020, 4:31 PM
Herald added subscribers: llvm-commits, jfb. · View Herald Transcript
aeubanks added a reviewer: efriedma.May 15 2020, 4:32 PM
Harbormaster failed remote builds in B56941: Diff 264389!May 15 2020, 5:57 PM
efriedma accepted this revision.May 16 2020, 1:42 PM

Normally, we try to avoid running clang-fomat on whole files at a time, but I guess git-clang-format is unhappy with this file because the indentation is wrong. So LGTM, I guess, with one minor comment.

llvm/include/llvm/CodeGen/ISDOpcodes.h
1173

Please fix this table so the columns line up again.

This revision is now accepted and ready to land.May 16 2020, 1:42 PM
aeubanks updated this revision to Diff 264471.May 16 2020, 10:34 PM
aeubanks marked an inline comment as done.

Format table

Closed by commit rG8092c8fec084: [NFC] Run clang-format on ISDOpcodes.h (authored by aeubanks). · Explain WhyMay 16 2020, 10:47 PM
This revision was automatically updated to reflect the committed changes.
Harbormaster failed remote builds in B56984: Diff 264471!May 16 2020, 10:48 PM

Revision Contents

PathSize
llvm/
include/
llvm/
CodeGen/
2345 lines

Diff 264471

llvm/include/llvm/CodeGen/ISDOpcodes.h

Show All 16 Lines
namespace llvm { namespace llvm {
/// ISD namespace - This namespace contains an enum which represents all of the /// ISD namespace - This namespace contains an enum which represents all of the
/// SelectionDAG node types and value types. /// SelectionDAG node types and value types.
/// ///
namespace ISD { namespace ISD {
//===--------------------------------------------------------------------===// //===--------------------------------------------------------------------===//
/// ISD::NodeType enum - This enum defines the target-independent operators /// ISD::NodeType enum - This enum defines the target-independent operators
/// for a SelectionDAG. /// for a SelectionDAG.
/// ///
/// Targets may also define target-dependent operator codes for SDNodes. For /// Targets may also define target-dependent operator codes for SDNodes. For
/// example, on x86, these are the enum values in the X86ISD namespace. /// example, on x86, these are the enum values in the X86ISD namespace.
/// Targets should aim to use target-independent operators to model their /// Targets should aim to use target-independent operators to model their
/// instruction sets as much as possible, and only use target-dependent /// instruction sets as much as possible, and only use target-dependent
/// operators when they have special requirements. /// operators when they have special requirements.
/// ///
/// Finally, during and after selection proper, SNodes may use special /// Finally, during and after selection proper, SNodes may use special
/// operator codes that correspond directly with MachineInstr opcodes. These /// operator codes that correspond directly with MachineInstr opcodes. These
/// are used to represent selected instructions. See the isMachineOpcode() /// are used to represent selected instructions. See the isMachineOpcode()
/// and getMachineOpcode() member functions of SDNode. /// and getMachineOpcode() member functions of SDNode.
/// ///
enum NodeType { enum NodeType {
/// DELETED_NODE - This is an illegal value that is used to catch /// DELETED_NODE - This is an illegal value that is used to catch
/// errors. This opcode is not a legal opcode for any node. /// errors. This opcode is not a legal opcode for any node.
DELETED_NODE, DELETED_NODE,
/// EntryToken - This is the marker used to indicate the start of a region. /// EntryToken - This is the marker used to indicate the start of a region.
EntryToken, EntryToken,
/// TokenFactor - This node takes multiple tokens as input and produces a /// TokenFactor - This node takes multiple tokens as input and produces a
/// single token result. This is used to represent the fact that the operand /// single token result. This is used to represent the fact that the operand
/// operators are independent of each other. /// operators are independent of each other.
TokenFactor, TokenFactor,
/// AssertSext, AssertZext - These nodes record if a register contains a /// AssertSext, AssertZext - These nodes record if a register contains a
/// value that has already been zero or sign extended from a narrower type. /// value that has already been zero or sign extended from a narrower type.
/// These nodes take two operands. The first is the node that has already /// These nodes take two operands. The first is the node that has already
/// been extended, and the second is a value type node indicating the width /// been extended, and the second is a value type node indicating the width
/// of the extension /// of the extension
AssertSext, AssertZext, AssertSext,
AssertZext,
/// Various leaf nodes. /// Various leaf nodes.
BasicBlock, VALUETYPE, CONDCODE, Register, RegisterMask, BasicBlock,
Constant, ConstantFP, VALUETYPE,
GlobalAddress, GlobalTLSAddress, FrameIndex, CONDCODE,
JumpTable, ConstantPool, ExternalSymbol, BlockAddress, Register,
RegisterMask,
Constant,
ConstantFP,
GlobalAddress,
GlobalTLSAddress,
FrameIndex,
JumpTable,
ConstantPool,
ExternalSymbol,
BlockAddress,
/// The address of the GOT /// The address of the GOT
GLOBAL_OFFSET_TABLE, GLOBAL_OFFSET_TABLE,
/// FRAMEADDR, RETURNADDR - These nodes represent llvm.frameaddress and /// FRAMEADDR, RETURNADDR - These nodes represent llvm.frameaddress and
/// llvm.returnaddress on the DAG. These nodes take one operand, the index /// llvm.returnaddress on the DAG. These nodes take one operand, the index
/// of the frame or return address to return. An index of zero corresponds /// of the frame or return address to return. An index of zero corresponds
/// to the current function's frame or return address, an index of one to /// to the current function's frame or return address, an index of one to
/// the parent's frame or return address, and so on. /// the parent's frame or return address, and so on.
FRAMEADDR, RETURNADDR, ADDROFRETURNADDR, SPONENTRY, FRAMEADDR,
RETURNADDR,
ADDROFRETURNADDR,
SPONENTRY,
/// LOCAL_RECOVER - Represents the llvm.localrecover intrinsic. /// LOCAL_RECOVER - Represents the llvm.localrecover intrinsic.
/// Materializes the offset from the local object pointer of another /// Materializes the offset from the local object pointer of another
/// function to a particular local object passed to llvm.localescape. The /// function to a particular local object passed to llvm.localescape. The
/// operand is the MCSymbol label used to represent this offset, since /// operand is the MCSymbol label used to represent this offset, since
/// typically the offset is not known until after code generation of the /// typically the offset is not known until after code generation of the
/// parent. /// parent.
LOCAL_RECOVER, LOCAL_RECOVER,
/// READ_REGISTER, WRITE_REGISTER - This node represents llvm.register on /// READ_REGISTER, WRITE_REGISTER - This node represents llvm.register on
/// the DAG, which implements the named register global variables extension. /// the DAG, which implements the named register global variables extension.
READ_REGISTER, READ_REGISTER,
WRITE_REGISTER, WRITE_REGISTER,
/// FRAME_TO_ARGS_OFFSET - This node represents offset from frame pointer to /// FRAME_TO_ARGS_OFFSET - This node represents offset from frame pointer to
/// first (possible) on-stack argument. This is needed for correct stack /// first (possible) on-stack argument. This is needed for correct stack
/// adjustment during unwind. /// adjustment during unwind.
FRAME_TO_ARGS_OFFSET, FRAME_TO_ARGS_OFFSET,
/// EH_DWARF_CFA - This node represents the pointer to the DWARF Canonical /// EH_DWARF_CFA - This node represents the pointer to the DWARF Canonical
/// Frame Address (CFA), generally the value of the stack pointer at the /// Frame Address (CFA), generally the value of the stack pointer at the
/// call site in the previous frame. /// call site in the previous frame.
EH_DWARF_CFA, EH_DWARF_CFA,
/// OUTCHAIN = EH_RETURN(INCHAIN, OFFSET, HANDLER) - This node represents /// OUTCHAIN = EH_RETURN(INCHAIN, OFFSET, HANDLER) - This node represents
/// 'eh_return' gcc dwarf builtin, which is used to return from /// 'eh_return' gcc dwarf builtin, which is used to return from
/// exception. The general meaning is: adjust stack by OFFSET and pass /// exception. The general meaning is: adjust stack by OFFSET and pass
/// execution to HANDLER. Many platform-related details also :) /// execution to HANDLER. Many platform-related details also :)
EH_RETURN, EH_RETURN,
/// RESULT, OUTCHAIN = EH_SJLJ_SETJMP(INCHAIN, buffer) /// RESULT, OUTCHAIN = EH_SJLJ_SETJMP(INCHAIN, buffer)
/// This corresponds to the eh.sjlj.setjmp intrinsic. /// This corresponds to the eh.sjlj.setjmp intrinsic.
/// It takes an input chain and a pointer to the jump buffer as inputs /// It takes an input chain and a pointer to the jump buffer as inputs
/// and returns an outchain. /// and returns an outchain.
EH_SJLJ_SETJMP, EH_SJLJ_SETJMP,
/// OUTCHAIN = EH_SJLJ_LONGJMP(INCHAIN, buffer) /// OUTCHAIN = EH_SJLJ_LONGJMP(INCHAIN, buffer)
/// This corresponds to the eh.sjlj.longjmp intrinsic. /// This corresponds to the eh.sjlj.longjmp intrinsic.
/// It takes an input chain and a pointer to the jump buffer as inputs /// It takes an input chain and a pointer to the jump buffer as inputs
/// and returns an outchain. /// and returns an outchain.
EH_SJLJ_LONGJMP, EH_SJLJ_LONGJMP,
/// OUTCHAIN = EH_SJLJ_SETUP_DISPATCH(INCHAIN) /// OUTCHAIN = EH_SJLJ_SETUP_DISPATCH(INCHAIN)
/// The target initializes the dispatch table here. /// The target initializes the dispatch table here.
EH_SJLJ_SETUP_DISPATCH, EH_SJLJ_SETUP_DISPATCH,
/// TargetConstant* - Like Constant*, but the DAG does not do any folding, /// TargetConstant* - Like Constant*, but the DAG does not do any folding,
/// simplification, or lowering of the constant. They are used for constants /// simplification, or lowering of the constant. They are used for constants
/// which are known to fit in the immediate fields of their users, or for /// which are known to fit in the immediate fields of their users, or for
/// carrying magic numbers which are not values which need to be /// carrying magic numbers which are not values which need to be
/// materialized in registers. /// materialized in registers.
TargetConstant, TargetConstant,
TargetConstantFP, TargetConstantFP,
/// TargetGlobalAddress - Like GlobalAddress, but the DAG does no folding or /// TargetGlobalAddress - Like GlobalAddress, but the DAG does no folding or
/// anything else with this node, and this is valid in the target-specific /// anything else with this node, and this is valid in the target-specific
/// dag, turning into a GlobalAddress operand. /// dag, turning into a GlobalAddress operand.
TargetGlobalAddress, TargetGlobalAddress,
TargetGlobalTLSAddress, TargetGlobalTLSAddress,
TargetFrameIndex, TargetFrameIndex,
TargetJumpTable, TargetJumpTable,
TargetConstantPool, TargetConstantPool,
TargetExternalSymbol, TargetExternalSymbol,
TargetBlockAddress, TargetBlockAddress,
MCSymbol, MCSymbol,
/// TargetIndex - Like a constant pool entry, but with completely /// TargetIndex - Like a constant pool entry, but with completely
/// target-dependent semantics. Holds target flags, a 32-bit index, and a /// target-dependent semantics. Holds target flags, a 32-bit index, and a
/// 64-bit index. Targets can use this however they like. /// 64-bit index. Targets can use this however they like.
TargetIndex, TargetIndex,
/// RESULT = INTRINSIC_WO_CHAIN(INTRINSICID, arg1, arg2, ...) /// RESULT = INTRINSIC_WO_CHAIN(INTRINSICID, arg1, arg2, ...)
/// This node represents a target intrinsic function with no side effects. /// This node represents a target intrinsic function with no side effects.
/// The first operand is the ID number of the intrinsic from the /// The first operand is the ID number of the intrinsic from the
/// llvm::Intrinsic namespace. The operands to the intrinsic follow. The /// llvm::Intrinsic namespace. The operands to the intrinsic follow. The
/// node returns the result of the intrinsic. /// node returns the result of the intrinsic.
INTRINSIC_WO_CHAIN, INTRINSIC_WO_CHAIN,
/// RESULT,OUTCHAIN = INTRINSIC_W_CHAIN(INCHAIN, INTRINSICID, arg1, ...) /// RESULT,OUTCHAIN = INTRINSIC_W_CHAIN(INCHAIN, INTRINSICID, arg1, ...)
/// This node represents a target intrinsic function with side effects that /// This node represents a target intrinsic function with side effects that
/// returns a result. The first operand is a chain pointer. The second is /// returns a result. The first operand is a chain pointer. The second is
/// the ID number of the intrinsic from the llvm::Intrinsic namespace. The /// the ID number of the intrinsic from the llvm::Intrinsic namespace. The
/// operands to the intrinsic follow. The node has two results, the result /// operands to the intrinsic follow. The node has two results, the result
/// of the intrinsic and an output chain. /// of the intrinsic and an output chain.
INTRINSIC_W_CHAIN, INTRINSIC_W_CHAIN,
/// OUTCHAIN = INTRINSIC_VOID(INCHAIN, INTRINSICID, arg1, arg2, ...) /// OUTCHAIN = INTRINSIC_VOID(INCHAIN, INTRINSICID, arg1, arg2, ...)
/// This node represents a target intrinsic function with side effects that /// This node represents a target intrinsic function with side effects that
/// does not return a result. The first operand is a chain pointer. The /// does not return a result. The first operand is a chain pointer. The
/// second is the ID number of the intrinsic from the llvm::Intrinsic /// second is the ID number of the intrinsic from the llvm::Intrinsic
/// namespace. The operands to the intrinsic follow. /// namespace. The operands to the intrinsic follow.
INTRINSIC_VOID, INTRINSIC_VOID,
/// CopyToReg - This node has three operands: a chain, a register number to /// CopyToReg - This node has three operands: a chain, a register number to
/// set to this value, and a value. /// set to this value, and a value.
CopyToReg, CopyToReg,
/// CopyFromReg - This node indicates that the input value is a virtual or /// CopyFromReg - This node indicates that the input value is a virtual or
/// physical register that is defined outside of the scope of this /// physical register that is defined outside of the scope of this
/// SelectionDAG. The register is available from the RegisterSDNode object. /// SelectionDAG. The register is available from the RegisterSDNode object.
CopyFromReg, CopyFromReg,
/// UNDEF - An undefined node. /// UNDEF - An undefined node.
UNDEF, UNDEF,
// FREEZE - FREEZE(VAL) returns an arbitrary value if VAL is UNDEF (or // FREEZE - FREEZE(VAL) returns an arbitrary value if VAL is UNDEF (or
// is evaluated to UNDEF), or returns VAL otherwise. Note that each // is evaluated to UNDEF), or returns VAL otherwise. Note that each
// read of UNDEF can yield different value, but FREEZE(UNDEF) cannot. // read of UNDEF can yield different value, but FREEZE(UNDEF) cannot.
FREEZE, FREEZE,
/// EXTRACT_ELEMENT - This is used to get the lower or upper (determined by /// EXTRACT_ELEMENT - This is used to get the lower or upper (determined by
/// a Constant, which is required to be operand #1) half of the integer or /// a Constant, which is required to be operand #1) half of the integer or
/// float value specified as operand #0. This is only for use before /// float value specified as operand #0. This is only for use before
/// legalization, for values that will be broken into multiple registers. /// legalization, for values that will be broken into multiple registers.
EXTRACT_ELEMENT, EXTRACT_ELEMENT,
/// BUILD_PAIR - This is the opposite of EXTRACT_ELEMENT in some ways. /// BUILD_PAIR - This is the opposite of EXTRACT_ELEMENT in some ways.
/// Given two values of the same integer value type, this produces a value /// Given two values of the same integer value type, this produces a value
/// twice as big. Like EXTRACT_ELEMENT, this can only be used before /// twice as big. Like EXTRACT_ELEMENT, this can only be used before
/// legalization. The lower part of the composite value should be in /// legalization. The lower part of the composite value should be in
/// element 0 and the upper part should be in element 1. /// element 0 and the upper part should be in element 1.
BUILD_PAIR, BUILD_PAIR,
/// MERGE_VALUES - This node takes multiple discrete operands and returns /// MERGE_VALUES - This node takes multiple discrete operands and returns
/// them all as its individual results. This nodes has exactly the same /// them all as its individual results. This nodes has exactly the same
/// number of inputs and outputs. This node is useful for some pieces of the /// number of inputs and outputs. This node is useful for some pieces of the
/// code generator that want to think about a single node with multiple /// code generator that want to think about a single node with multiple
/// results, not multiple nodes. /// results, not multiple nodes.
MERGE_VALUES, MERGE_VALUES,
/// Simple integer binary arithmetic operators. /// Simple integer binary arithmetic operators.
ADD, SUB, MUL, SDIV, UDIV, SREM, UREM, ADD,
SUB,
MUL,
SDIV,
UDIV,
SREM,
UREM,
/// SMUL_LOHI/UMUL_LOHI - Multiply two integers of type iN, producing /// SMUL_LOHI/UMUL_LOHI - Multiply two integers of type iN, producing
/// a signed/unsigned value of type i[2*N], and return the full value as /// a signed/unsigned value of type i[2*N], and return the full value as
/// two results, each of type iN. /// two results, each of type iN.
SMUL_LOHI, UMUL_LOHI, SMUL_LOHI,
UMUL_LOHI,
/// SDIVREM/UDIVREM - Divide two integers and produce both a quotient and /// SDIVREM/UDIVREM - Divide two integers and produce both a quotient and
/// remainder result. /// remainder result.
SDIVREM, UDIVREM, SDIVREM,
UDIVREM,
/// CARRY_FALSE - This node is used when folding other nodes, /// CARRY_FALSE - This node is used when folding other nodes,
/// like ADDC/SUBC, which indicate the carry result is always false. /// like ADDC/SUBC, which indicate the carry result is always false.
CARRY_FALSE, CARRY_FALSE,
/// Carry-setting nodes for multiple precision addition and subtraction. /// Carry-setting nodes for multiple precision addition and subtraction.
/// These nodes take two operands of the same value type, and produce two /// These nodes take two operands of the same value type, and produce two
/// results. The first result is the normal add or sub result, the second /// results. The first result is the normal add or sub result, the second
/// result is the carry flag result. /// result is the carry flag result.
/// FIXME: These nodes are deprecated in favor of ADDCARRY and SUBCARRY. /// FIXME: These nodes are deprecated in favor of ADDCARRY and SUBCARRY.
/// They are kept around for now to provide a smooth transition path /// They are kept around for now to provide a smooth transition path
/// toward the use of ADDCARRY/SUBCARRY and will eventually be removed. /// toward the use of ADDCARRY/SUBCARRY and will eventually be removed.
ADDC, SUBC, ADDC,
SUBC,
/// Carry-using nodes for multiple precision addition and subtraction. These /// Carry-using nodes for multiple precision addition and subtraction. These
/// nodes take three operands: The first two are the normal lhs and rhs to /// nodes take three operands: The first two are the normal lhs and rhs to
/// the add or sub, and the third is the input carry flag. These nodes /// the add or sub, and the third is the input carry flag. These nodes
/// produce two results; the normal result of the add or sub, and the output /// produce two results; the normal result of the add or sub, and the output
/// carry flag. These nodes both read and write a carry flag to allow them /// carry flag. These nodes both read and write a carry flag to allow them
/// to them to be chained together for add and sub of arbitrarily large /// to them to be chained together for add and sub of arbitrarily large
/// values. /// values.
ADDE, SUBE, ADDE,
SUBE,
/// Carry-using nodes for multiple precision addition and subtraction. /// Carry-using nodes for multiple precision addition and subtraction.
/// These nodes take three operands: The first two are the normal lhs and /// These nodes take three operands: The first two are the normal lhs and
/// rhs to the add or sub, and the third is a boolean indicating if there /// rhs to the add or sub, and the third is a boolean indicating if there
/// is an incoming carry. These nodes produce two results: the normal /// is an incoming carry. These nodes produce two results: the normal
/// result of the add or sub, and the output carry so they can be chained /// result of the add or sub, and the output carry so they can be chained
/// together. The use of this opcode is preferable to adde/sube if the /// together. The use of this opcode is preferable to adde/sube if the
/// target supports it, as the carry is a regular value rather than a /// target supports it, as the carry is a regular value rather than a
/// glue, which allows further optimisation. /// glue, which allows further optimisation.
ADDCARRY, SUBCARRY, ADDCARRY,
SUBCARRY,
/// RESULT, BOOL = [SU]ADDO(LHS, RHS) - Overflow-aware nodes for addition. /// RESULT, BOOL = [SU]ADDO(LHS, RHS) - Overflow-aware nodes for addition.
/// These nodes take two operands: the normal LHS and RHS to the add. They /// These nodes take two operands: the normal LHS and RHS to the add. They
/// produce two results: the normal result of the add, and a boolean that /// produce two results: the normal result of the add, and a boolean that
/// indicates if an overflow occurred (*not* a flag, because it may be store /// indicates if an overflow occurred (*not* a flag, because it may be store
/// to memory, etc.). If the type of the boolean is not i1 then the high /// to memory, etc.). If the type of the boolean is not i1 then the high
/// bits conform to getBooleanContents. /// bits conform to getBooleanContents.
/// These nodes are generated from llvm.[su]add.with.overflow intrinsics. /// These nodes are generated from llvm.[su]add.with.overflow intrinsics.
SADDO, UADDO, SADDO,
UADDO,
/// Same for subtraction. /// Same for subtraction.
SSUBO, USUBO, SSUBO,
USUBO,
/// Same for multiplication. /// Same for multiplication.
SMULO, UMULO, SMULO,
UMULO,
/// RESULT = [US]ADDSAT(LHS, RHS) - Perform saturation addition on 2 /// RESULT = [US]ADDSAT(LHS, RHS) - Perform saturation addition on 2
/// integers with the same bit width (W). If the true value of LHS + RHS /// integers with the same bit width (W). If the true value of LHS + RHS
/// exceeds the largest value that can be represented by W bits, the /// exceeds the largest value that can be represented by W bits, the
/// resulting value is this maximum value. Otherwise, if this value is less /// resulting value is this maximum value. Otherwise, if this value is less
/// than the smallest value that can be represented by W bits, the /// than the smallest value that can be represented by W bits, the
/// resulting value is this minimum value. /// resulting value is this minimum value.
SADDSAT, UADDSAT, SADDSAT,
UADDSAT,
/// RESULT = [US]SUBSAT(LHS, RHS) - Perform saturation subtraction on 2 /// RESULT = [US]SUBSAT(LHS, RHS) - Perform saturation subtraction on 2
/// integers with the same bit width (W). If the true value of LHS - RHS /// integers with the same bit width (W). If the true value of LHS - RHS
/// exceeds the largest value that can be represented by W bits, the /// exceeds the largest value that can be represented by W bits, the
/// resulting value is this maximum value. Otherwise, if this value is less /// resulting value is this maximum value. Otherwise, if this value is less
/// than the smallest value that can be represented by W bits, the /// than the smallest value that can be represented by W bits, the
/// resulting value is this minimum value. /// resulting value is this minimum value.
SSUBSAT, USUBSAT, SSUBSAT,
USUBSAT,
/// RESULT = [US]MULFIX(LHS, RHS, SCALE) - Perform fixed point multiplication on /// RESULT = [US]MULFIX(LHS, RHS, SCALE) - Perform fixed point multiplication
/// on
/// 2 integers with the same width and scale. SCALE represents the scale of /// 2 integers with the same width and scale. SCALE represents the scale of
/// both operands as fixed point numbers. This SCALE parameter must be a /// both operands as fixed point numbers. This SCALE parameter must be a
/// constant integer. A scale of zero is effectively performing /// constant integer. A scale of zero is effectively performing
/// multiplication on 2 integers. /// multiplication on 2 integers.
SMULFIX, UMULFIX, SMULFIX,
UMULFIX,
/// Same as the corresponding unsaturated fixed point instructions, but the /// Same as the corresponding unsaturated fixed point instructions, but the
/// result is clamped between the min and max values representable by the /// result is clamped between the min and max values representable by the
/// bits of the first 2 operands. /// bits of the first 2 operands.
SMULFIXSAT, UMULFIXSAT, SMULFIXSAT,
UMULFIXSAT,
/// RESULT = [US]DIVFIX(LHS, RHS, SCALE) - Perform fixed point division on /// RESULT = [US]DIVFIX(LHS, RHS, SCALE) - Perform fixed point division on
/// 2 integers with the same width and scale. SCALE represents the scale /// 2 integers with the same width and scale. SCALE represents the scale
/// of both operands as fixed point numbers. This SCALE parameter must be a /// of both operands as fixed point numbers. This SCALE parameter must be a
/// constant integer. /// constant integer.
SDIVFIX, UDIVFIX, SDIVFIX,
UDIVFIX,
/// Same as the corresponding unsaturated fixed point instructions, but the /// Same as the corresponding unsaturated fixed point instructions, but the
/// result is clamped between the min and max values representable by the /// result is clamped between the min and max values representable by the
/// bits of the first 2 operands. /// bits of the first 2 operands.
SDIVFIXSAT, UDIVFIXSAT, SDIVFIXSAT,
UDIVFIXSAT,
/// Simple binary floating point operators. /// Simple binary floating point operators.
FADD, FSUB, FMUL, FDIV, FREM, FADD,
FSUB,
FMUL,
FDIV,
FREM,
/// Constrained versions of the binary floating point operators. /// Constrained versions of the binary floating point operators.
/// These will be lowered to the simple operators before final selection. /// These will be lowered to the simple operators before final selection.
/// They are used to limit optimizations while the DAG is being /// They are used to limit optimizations while the DAG is being
/// optimized. /// optimized.
STRICT_FADD, STRICT_FSUB, STRICT_FMUL, STRICT_FDIV, STRICT_FREM, STRICT_FADD,
STRICT_FSUB,
STRICT_FMUL,
STRICT_FDIV,
STRICT_FREM,
STRICT_FMA, STRICT_FMA,
/// Constrained versions of libm-equivalent floating point intrinsics. /// Constrained versions of libm-equivalent floating point intrinsics.
/// These will be lowered to the equivalent non-constrained pseudo-op /// These will be lowered to the equivalent non-constrained pseudo-op
/// (or expanded to the equivalent library call) before final selection. /// (or expanded to the equivalent library call) before final selection.
/// They are used to limit optimizations while the DAG is being optimized. /// They are used to limit optimizations while the DAG is being optimized.
STRICT_FSQRT, STRICT_FPOW, STRICT_FPOWI, STRICT_FSIN, STRICT_FCOS, STRICT_FSQRT,
STRICT_FEXP, STRICT_FEXP2, STRICT_FLOG, STRICT_FLOG10, STRICT_FLOG2, STRICT_FPOW,
STRICT_FRINT, STRICT_FNEARBYINT, STRICT_FMAXNUM, STRICT_FMINNUM, STRICT_FPOWI,
STRICT_FCEIL, STRICT_FFLOOR, STRICT_FROUND, STRICT_FTRUNC, STRICT_FSIN,
STRICT_LROUND, STRICT_LLROUND, STRICT_LRINT, STRICT_LLRINT, STRICT_FCOS,
STRICT_FMAXIMUM, STRICT_FMINIMUM, STRICT_FEXP,
STRICT_FEXP2,
STRICT_FLOG,
STRICT_FLOG10,
STRICT_FLOG2,
STRICT_FRINT,
STRICT_FNEARBYINT,
STRICT_FMAXNUM,
STRICT_FMINNUM,
STRICT_FCEIL,
STRICT_FFLOOR,
STRICT_FROUND,
STRICT_FTRUNC,
STRICT_LROUND,
STRICT_LLROUND,
STRICT_LRINT,
STRICT_LLRINT,
STRICT_FMAXIMUM,
STRICT_FMINIMUM,
/// STRICT_FP_TO_[US]INT - Convert a floating point value to a signed or /// STRICT_FP_TO_[US]INT - Convert a floating point value to a signed or
/// unsigned integer. These have the same semantics as fptosi and fptoui /// unsigned integer. These have the same semantics as fptosi and fptoui
/// in IR. /// in IR.
/// They are used to limit optimizations while the DAG is being optimized. /// They are used to limit optimizations while the DAG is being optimized.
STRICT_FP_TO_SINT, STRICT_FP_TO_SINT,
STRICT_FP_TO_UINT, STRICT_FP_TO_UINT,
/// STRICT_[US]INT_TO_FP - Convert a signed or unsigned integer to /// STRICT_[US]INT_TO_FP - Convert a signed or unsigned integer to
/// a floating point value. These have the same semantics as sitofp and /// a floating point value. These have the same semantics as sitofp and
/// uitofp in IR. /// uitofp in IR.
/// They are used to limit optimizations while the DAG is being optimized. /// They are used to limit optimizations while the DAG is being optimized.
STRICT_SINT_TO_FP, STRICT_SINT_TO_FP,
STRICT_UINT_TO_FP, STRICT_UINT_TO_FP,
/// X = STRICT_FP_ROUND(Y, TRUNC) - Rounding 'Y' from a larger floating /// X = STRICT_FP_ROUND(Y, TRUNC) - Rounding 'Y' from a larger floating
/// point type down to the precision of the destination VT. TRUNC is a /// point type down to the precision of the destination VT. TRUNC is a
/// flag, which is always an integer that is zero or one. If TRUNC is 0, /// flag, which is always an integer that is zero or one. If TRUNC is 0,
/// this is a normal rounding, if it is 1, this FP_ROUND is known to not /// this is a normal rounding, if it is 1, this FP_ROUND is known to not
/// change the value of Y. /// change the value of Y.
/// ///
/// The TRUNC = 1 case is used in cases where we know that the value will /// The TRUNC = 1 case is used in cases where we know that the value will
/// not be modified by the node, because Y is not using any of the extra /// not be modified by the node, because Y is not using any of the extra
/// precision of source type. This allows certain transformations like /// precision of source type. This allows certain transformations like
/// STRICT_FP_EXTEND(STRICT_FP_ROUND(X,1)) -> X which are not safe for /// STRICT_FP_EXTEND(STRICT_FP_ROUND(X,1)) -> X which are not safe for
/// STRICT_FP_EXTEND(STRICT_FP_ROUND(X,0)) because the extra bits aren't /// STRICT_FP_EXTEND(STRICT_FP_ROUND(X,0)) because the extra bits aren't
/// removed. /// removed.
/// It is used to limit optimizations while the DAG is being optimized. /// It is used to limit optimizations while the DAG is being optimized.
STRICT_FP_ROUND, STRICT_FP_ROUND,
/// X = STRICT_FP_EXTEND(Y) - Extend a smaller FP type into a larger FP /// X = STRICT_FP_EXTEND(Y) - Extend a smaller FP type into a larger FP
/// type. /// type.
/// It is used to limit optimizations while the DAG is being optimized. /// It is used to limit optimizations while the DAG is being optimized.
STRICT_FP_EXTEND, STRICT_FP_EXTEND,
/// STRICT_FSETCC/STRICT_FSETCCS - Constrained versions of SETCC, used /// STRICT_FSETCC/STRICT_FSETCCS - Constrained versions of SETCC, used
/// for floating-point operands only. STRICT_FSETCC performs a quiet /// for floating-point operands only. STRICT_FSETCC performs a quiet
/// comparison operation, while STRICT_FSETCCS performs a signaling /// comparison operation, while STRICT_FSETCCS performs a signaling
/// comparison operation. /// comparison operation.
STRICT_FSETCC, STRICT_FSETCCS, STRICT_FSETCC,
STRICT_FSETCCS,
/// FMA - Perform a * b + c with no intermediate rounding step. /// FMA - Perform a * b + c with no intermediate rounding step.
FMA, FMA,
/// FMAD - Perform a * b + c, while getting the same result as the /// FMAD - Perform a * b + c, while getting the same result as the
/// separately rounded operations. /// separately rounded operations.
FMAD, FMAD,
/// FCOPYSIGN(X, Y) - Return the value of X with the sign of Y. NOTE: This /// FCOPYSIGN(X, Y) - Return the value of X with the sign of Y. NOTE: This
/// DAG node does not require that X and Y have the same type, just that /// DAG node does not require that X and Y have the same type, just that
/// they are both floating point. X and the result must have the same type. /// they are both floating point. X and the result must have the same type.
/// FCOPYSIGN(f32, f64) is allowed. /// FCOPYSIGN(f32, f64) is allowed.
FCOPYSIGN, FCOPYSIGN,
/// INT = FGETSIGN(FP) - Return the sign bit of the specified floating point /// INT = FGETSIGN(FP) - Return the sign bit of the specified floating point
/// value as an integer 0/1 value. /// value as an integer 0/1 value.
FGETSIGN, FGETSIGN,
/// Returns platform specific canonical encoding of a floating point number. /// Returns platform specific canonical encoding of a floating point number.
FCANONICALIZE, FCANONICALIZE,
/// BUILD_VECTOR(ELT0, ELT1, ELT2, ELT3,...) - Return a vector with the /// BUILD_VECTOR(ELT0, ELT1, ELT2, ELT3,...) - Return a vector with the
/// specified, possibly variable, elements. The number of elements is /// specified, possibly variable, elements. The number of elements is
/// required to be a power of two. The types of the operands must all be /// required to be a power of two. The types of the operands must all be
/// the same and must match the vector element type, except that integer /// the same and must match the vector element type, except that integer
/// types are allowed to be larger than the element type, in which case /// types are allowed to be larger than the element type, in which case
/// the operands are implicitly truncated. /// the operands are implicitly truncated.
BUILD_VECTOR, BUILD_VECTOR,
/// INSERT_VECTOR_ELT(VECTOR, VAL, IDX) - Returns VECTOR with the element /// INSERT_VECTOR_ELT(VECTOR, VAL, IDX) - Returns VECTOR with the element
/// at IDX replaced with VAL. If the type of VAL is larger than the vector /// at IDX replaced with VAL. If the type of VAL is larger than the vector
/// element type then VAL is truncated before replacement. /// element type then VAL is truncated before replacement.
INSERT_VECTOR_ELT, INSERT_VECTOR_ELT,
/// EXTRACT_VECTOR_ELT(VECTOR, IDX) - Returns a single element from VECTOR /// EXTRACT_VECTOR_ELT(VECTOR, IDX) - Returns a single element from VECTOR
/// identified by the (potentially variable) element number IDX. If the /// identified by the (potentially variable) element number IDX. If the
/// return type is an integer type larger than the element type of the /// return type is an integer type larger than the element type of the
/// vector, the result is extended to the width of the return type. In /// vector, the result is extended to the width of the return type. In
/// that case, the high bits are undefined. /// that case, the high bits are undefined.
EXTRACT_VECTOR_ELT, EXTRACT_VECTOR_ELT,
/// CONCAT_VECTORS(VECTOR0, VECTOR1, ...) - Given a number of values of /// CONCAT_VECTORS(VECTOR0, VECTOR1, ...) - Given a number of values of
/// vector type with the same length and element type, this produces a /// vector type with the same length and element type, this produces a
/// concatenated vector result value, with length equal to the sum of the /// concatenated vector result value, with length equal to the sum of the
/// lengths of the input vectors. /// lengths of the input vectors.
CONCAT_VECTORS, CONCAT_VECTORS,
/// INSERT_SUBVECTOR(VECTOR1, VECTOR2, IDX) - Returns a vector /// INSERT_SUBVECTOR(VECTOR1, VECTOR2, IDX) - Returns a vector
/// with VECTOR2 inserted into VECTOR1 at the constant element number /// with VECTOR2 inserted into VECTOR1 at the constant element number
/// IDX, which must be a multiple of the VECTOR2 vector length. The /// IDX, which must be a multiple of the VECTOR2 vector length. The
/// elements of VECTOR1 starting at IDX are overwritten with VECTOR2. /// elements of VECTOR1 starting at IDX are overwritten with VECTOR2.
/// Elements IDX through vector_length(VECTOR2) must be valid VECTOR1 /// Elements IDX through vector_length(VECTOR2) must be valid VECTOR1
/// indices. /// indices.
INSERT_SUBVECTOR, INSERT_SUBVECTOR,
/// EXTRACT_SUBVECTOR(VECTOR, IDX) - Returns a subvector from VECTOR (an /// EXTRACT_SUBVECTOR(VECTOR, IDX) - Returns a subvector from VECTOR (an
/// vector value) starting with the constant element number IDX, which /// vector value) starting with the constant element number IDX, which
/// must be a multiple of the result vector length. Elements IDX through /// must be a multiple of the result vector length. Elements IDX through
/// vector_length(VECTOR) must be valid VECTOR indices. /// vector_length(VECTOR) must be valid VECTOR indices.
EXTRACT_SUBVECTOR, EXTRACT_SUBVECTOR,
/// VECTOR_SHUFFLE(VEC1, VEC2) - Returns a vector, of the same type as /// VECTOR_SHUFFLE(VEC1, VEC2) - Returns a vector, of the same type as
/// VEC1/VEC2. A VECTOR_SHUFFLE node also contains an array of constant int /// VEC1/VEC2. A VECTOR_SHUFFLE node also contains an array of constant int
/// values that indicate which value (or undef) each result element will /// values that indicate which value (or undef) each result element will
/// get. These constant ints are accessible through the /// get. These constant ints are accessible through the
/// ShuffleVectorSDNode class. This is quite similar to the Altivec /// ShuffleVectorSDNode class. This is quite similar to the Altivec
/// 'vperm' instruction, except that the indices must be constants and are /// 'vperm' instruction, except that the indices must be constants and are
/// in terms of the element size of VEC1/VEC2, not in terms of bytes. /// in terms of the element size of VEC1/VEC2, not in terms of bytes.
VECTOR_SHUFFLE, VECTOR_SHUFFLE,
/// SCALAR_TO_VECTOR(VAL) - This represents the operation of loading a /// SCALAR_TO_VECTOR(VAL) - This represents the operation of loading a
/// scalar value into element 0 of the resultant vector type. The top /// scalar value into element 0 of the resultant vector type. The top
/// elements 1 to N-1 of the N-element vector are undefined. The type /// elements 1 to N-1 of the N-element vector are undefined. The type
/// of the operand must match the vector element type, except when they /// of the operand must match the vector element type, except when they
/// are integer types. In this case the operand is allowed to be wider /// are integer types. In this case the operand is allowed to be wider
/// than the vector element type, and is implicitly truncated to it. /// than the vector element type, and is implicitly truncated to it.
SCALAR_TO_VECTOR, SCALAR_TO_VECTOR,
/// SPLAT_VECTOR(VAL) - Returns a vector with the scalar value VAL /// SPLAT_VECTOR(VAL) - Returns a vector with the scalar value VAL
/// duplicated in all lanes. The type of the operand must match the vector /// duplicated in all lanes. The type of the operand must match the vector
/// element type, except when they are integer types. In this case the /// element type, except when they are integer types. In this case the
/// operand is allowed to be wider than the vector element type, and is /// operand is allowed to be wider than the vector element type, and is
/// implicitly truncated to it. /// implicitly truncated to it.
SPLAT_VECTOR, SPLAT_VECTOR,
/// MULHU/MULHS - Multiply high - Multiply two integers of type iN, /// MULHU/MULHS - Multiply high - Multiply two integers of type iN,
/// producing an unsigned/signed value of type i[2*N], then return the top /// producing an unsigned/signed value of type i[2*N], then return the top
/// part. /// part.
MULHU, MULHS, MULHU,
MULHS,
/// [US]{MIN/MAX} - Binary minimum or maximum or signed or unsigned /// [US]{MIN/MAX} - Binary minimum or maximum or signed or unsigned
/// integers. /// integers.
SMIN, SMAX, UMIN, UMAX, SMIN,
SMAX,
UMIN,
UMAX,
/// Bitwise operators - logical and, logical or, logical xor. /// Bitwise operators - logical and, logical or, logical xor.
AND, OR, XOR, AND,
OR,
XOR,
/// ABS - Determine the unsigned absolute value of a signed integer value of /// ABS - Determine the unsigned absolute value of a signed integer value of
/// the same bitwidth. /// the same bitwidth.
/// Note: A value of INT_MIN will return INT_MIN, no saturation or overflow /// Note: A value of INT_MIN will return INT_MIN, no saturation or overflow
/// is performed. /// is performed.
ABS, ABS,
/// Shift and rotation operations. After legalization, the type of the /// Shift and rotation operations. After legalization, the type of the
/// shift amount is known to be TLI.getShiftAmountTy(). Before legalization /// shift amount is known to be TLI.getShiftAmountTy(). Before legalization
/// the shift amount can be any type, but care must be taken to ensure it is /// the shift amount can be any type, but care must be taken to ensure it is
/// large enough. TLI.getShiftAmountTy() is i8 on some targets, but before /// large enough. TLI.getShiftAmountTy() is i8 on some targets, but before
/// legalization, types like i1024 can occur and i8 doesn't have enough bits /// legalization, types like i1024 can occur and i8 doesn't have enough bits
/// to represent the shift amount. /// to represent the shift amount.
/// When the 1st operand is a vector, the shift amount must be in the same /// When the 1st operand is a vector, the shift amount must be in the same
/// type. (TLI.getShiftAmountTy() will return the same type when the input /// type. (TLI.getShiftAmountTy() will return the same type when the input
/// type is a vector.) /// type is a vector.)
/// For rotates and funnel shifts, the shift amount is treated as an unsigned /// For rotates and funnel shifts, the shift amount is treated as an unsigned
/// amount modulo the element size of the first operand. /// amount modulo the element size of the first operand.
/// ///
/// Funnel 'double' shifts take 3 operands, 2 inputs and the shift amount. /// Funnel 'double' shifts take 3 operands, 2 inputs and the shift amount.
/// fshl(X,Y,Z): (X << (Z % BW)) | (Y >> (BW - (Z % BW))) /// fshl(X,Y,Z): (X << (Z % BW)) | (Y >> (BW - (Z % BW)))
/// fshr(X,Y,Z): (X << (BW - (Z % BW))) | (Y >> (Z % BW)) /// fshr(X,Y,Z): (X << (BW - (Z % BW))) | (Y >> (Z % BW))
SHL, SRA, SRL, ROTL, ROTR, FSHL, FSHR, SHL,
SRA,
SRL,
ROTL,
ROTR,
FSHL,
FSHR,
/// Byte Swap and Counting operators. /// Byte Swap and Counting operators.
BSWAP, CTTZ, CTLZ, CTPOP, BITREVERSE, BSWAP,
CTTZ,
CTLZ,
CTPOP,
BITREVERSE,
/// Bit counting operators with an undefined result for zero inputs. /// Bit counting operators with an undefined result for zero inputs.
CTTZ_ZERO_UNDEF, CTLZ_ZERO_UNDEF, CTTZ_ZERO_UNDEF,
CTLZ_ZERO_UNDEF,
/// Select(COND, TRUEVAL, FALSEVAL). If the type of the boolean COND is not /// Select(COND, TRUEVAL, FALSEVAL). If the type of the boolean COND is not
/// i1 then the high bits must conform to getBooleanContents. /// i1 then the high bits must conform to getBooleanContents.
SELECT, SELECT,
/// Select with a vector condition (op #0) and two vector operands (ops #1 /// Select with a vector condition (op #0) and two vector operands (ops #1
/// and #2), returning a vector result. All vectors have the same length. /// and #2), returning a vector result. All vectors have the same length.
/// Much like the scalar select and setcc, each bit in the condition selects /// Much like the scalar select and setcc, each bit in the condition selects
/// whether the corresponding result element is taken from op #1 or op #2. /// whether the corresponding result element is taken from op #1 or op #2.
/// At first, the VSELECT condition is of vXi1 type. Later, targets may /// At first, the VSELECT condition is of vXi1 type. Later, targets may
/// change the condition type in order to match the VSELECT node using a /// change the condition type in order to match the VSELECT node using a
/// pattern. The condition follows the BooleanContent format of the target. /// pattern. The condition follows the BooleanContent format of the target.
VSELECT, VSELECT,
/// Select with condition operator - This selects between a true value and /// Select with condition operator - This selects between a true value and
/// a false value (ops #2 and #3) based on the boolean result of comparing /// a false value (ops #2 and #3) based on the boolean result of comparing
/// the lhs and rhs (ops #0 and #1) of a conditional expression with the /// the lhs and rhs (ops #0 and #1) of a conditional expression with the
/// condition code in op #4, a CondCodeSDNode. /// condition code in op #4, a CondCodeSDNode.
SELECT_CC, SELECT_CC,
/// SetCC operator - This evaluates to a true value iff the condition is /// SetCC operator - This evaluates to a true value iff the condition is
/// true. If the result value type is not i1 then the high bits conform /// true. If the result value type is not i1 then the high bits conform
/// to getBooleanContents. The operands to this are the left and right /// to getBooleanContents. The operands to this are the left and right
/// operands to compare (ops #0, and #1) and the condition code to compare /// operands to compare (ops #0, and #1) and the condition code to compare
/// them with (op #2) as a CondCodeSDNode. If the operands are vector types /// them with (op #2) as a CondCodeSDNode. If the operands are vector types
/// then the result type must also be a vector type. /// then the result type must also be a vector type.
SETCC, SETCC,
/// Like SetCC, ops #0 and #1 are the LHS and RHS operands to compare, but /// Like SetCC, ops #0 and #1 are the LHS and RHS operands to compare, but
/// op #2 is a boolean indicating if there is an incoming carry. This /// op #2 is a boolean indicating if there is an incoming carry. This
/// operator checks the result of "LHS - RHS - Carry", and can be used to /// operator checks the result of "LHS - RHS - Carry", and can be used to
/// compare two wide integers: /// compare two wide integers:
/// (setcccarry lhshi rhshi (subcarry lhslo rhslo) cc). /// (setcccarry lhshi rhshi (subcarry lhslo rhslo) cc).
/// Only valid for integers. /// Only valid for integers.
SETCCCARRY, SETCCCARRY,
/// SHL_PARTS/SRA_PARTS/SRL_PARTS - These operators are used for expanded /// SHL_PARTS/SRA_PARTS/SRL_PARTS - These operators are used for expanded
/// integer shift operations. The operation ordering is: /// integer shift operations. The operation ordering is:
/// [Lo,Hi] = op [LoLHS,HiLHS], Amt /// [Lo,Hi] = op [LoLHS,HiLHS], Amt
SHL_PARTS, SRA_PARTS, SRL_PARTS, SHL_PARTS,
SRA_PARTS,
SRL_PARTS,
/// Conversion operators. These are all single input single output /// Conversion operators. These are all single input single output
/// operations. For all of these, the result type must be strictly /// operations. For all of these, the result type must be strictly
/// wider or narrower (depending on the operation) than the source /// wider or narrower (depending on the operation) than the source
/// type. /// type.
/// SIGN_EXTEND - Used for integer types, replicating the sign bit /// SIGN_EXTEND - Used for integer types, replicating the sign bit
/// into new bits. /// into new bits.
SIGN_EXTEND, SIGN_EXTEND,
/// ZERO_EXTEND - Used for integer types, zeroing the new bits. /// ZERO_EXTEND - Used for integer types, zeroing the new bits.
ZERO_EXTEND, ZERO_EXTEND,
/// ANY_EXTEND - Used for integer types. The high bits are undefined. /// ANY_EXTEND - Used for integer types. The high bits are undefined.
ANY_EXTEND, ANY_EXTEND,
/// TRUNCATE - Completely drop the high bits. /// TRUNCATE - Completely drop the high bits.
TRUNCATE, TRUNCATE,
/// [SU]INT_TO_FP - These operators convert integers (whose interpreted sign /// [SU]INT_TO_FP - These operators convert integers (whose interpreted sign
/// depends on the first letter) to floating point. /// depends on the first letter) to floating point.
SINT_TO_FP, SINT_TO_FP,
UINT_TO_FP, UINT_TO_FP,
/// SIGN_EXTEND_INREG - This operator atomically performs a SHL/SRA pair to /// SIGN_EXTEND_INREG - This operator atomically performs a SHL/SRA pair to
/// sign extend a small value in a large integer register (e.g. sign /// sign extend a small value in a large integer register (e.g. sign
/// extending the low 8 bits of a 32-bit register to fill the top 24 bits /// extending the low 8 bits of a 32-bit register to fill the top 24 bits
/// with the 7th bit). The size of the smaller type is indicated by the 1th /// with the 7th bit). The size of the smaller type is indicated by the 1th
/// operand, a ValueType node. /// operand, a ValueType node.
SIGN_EXTEND_INREG, SIGN_EXTEND_INREG,
/// ANY_EXTEND_VECTOR_INREG(Vector) - This operator represents an /// ANY_EXTEND_VECTOR_INREG(Vector) - This operator represents an
/// in-register any-extension of the low lanes of an integer vector. The /// in-register any-extension of the low lanes of an integer vector. The
/// result type must have fewer elements than the operand type, and those /// result type must have fewer elements than the operand type, and those
/// elements must be larger integer types such that the total size of the /// elements must be larger integer types such that the total size of the
/// operand type is less than or equal to the size of the result type. Each /// operand type is less than or equal to the size of the result type. Each
/// of the low operand elements is any-extended into the corresponding, /// of the low operand elements is any-extended into the corresponding,
/// wider result elements with the high bits becoming undef. /// wider result elements with the high bits becoming undef.
/// NOTE: The type legalizer prefers to make the operand and result size /// NOTE: The type legalizer prefers to make the operand and result size
/// the same to allow expansion to shuffle vector during op legalization. /// the same to allow expansion to shuffle vector during op legalization.
ANY_EXTEND_VECTOR_INREG, ANY_EXTEND_VECTOR_INREG,
/// SIGN_EXTEND_VECTOR_INREG(Vector) - This operator represents an /// SIGN_EXTEND_VECTOR_INREG(Vector) - This operator represents an
/// in-register sign-extension of the low lanes of an integer vector. The /// in-register sign-extension of the low lanes of an integer vector. The
/// result type must have fewer elements than the operand type, and those /// result type must have fewer elements than the operand type, and those
/// elements must be larger integer types such that the total size of the /// elements must be larger integer types such that the total size of the
/// operand type is less than or equal to the size of the result type. Each /// operand type is less than or equal to the size of the result type. Each
/// of the low operand elements is sign-extended into the corresponding, /// of the low operand elements is sign-extended into the corresponding,
/// wider result elements. /// wider result elements.
/// NOTE: The type legalizer prefers to make the operand and result size /// NOTE: The type legalizer prefers to make the operand and result size
/// the same to allow expansion to shuffle vector during op legalization. /// the same to allow expansion to shuffle vector during op legalization.
SIGN_EXTEND_VECTOR_INREG, SIGN_EXTEND_VECTOR_INREG,
/// ZERO_EXTEND_VECTOR_INREG(Vector) - This operator represents an /// ZERO_EXTEND_VECTOR_INREG(Vector) - This operator represents an
/// in-register zero-extension of the low lanes of an integer vector. The /// in-register zero-extension of the low lanes of an integer vector. The
/// result type must have fewer elements than the operand type, and those /// result type must have fewer elements than the operand type, and those
/// elements must be larger integer types such that the total size of the /// elements must be larger integer types such that the total size of the
/// operand type is less than or equal to the size of the result type. Each /// operand type is less than or equal to the size of the result type. Each
/// of the low operand elements is zero-extended into the corresponding, /// of the low operand elements is zero-extended into the corresponding,
/// wider result elements. /// wider result elements.
/// NOTE: The type legalizer prefers to make the operand and result size /// NOTE: The type legalizer prefers to make the operand and result size
/// the same to allow expansion to shuffle vector during op legalization. /// the same to allow expansion to shuffle vector during op legalization.
ZERO_EXTEND_VECTOR_INREG, ZERO_EXTEND_VECTOR_INREG,
/// FP_TO_[US]INT - Convert a floating point value to a signed or unsigned /// FP_TO_[US]INT - Convert a floating point value to a signed or unsigned
/// integer. These have the same semantics as fptosi and fptoui in IR. If /// integer. These have the same semantics as fptosi and fptoui in IR. If
/// the FP value cannot fit in the integer type, the results are undefined. /// the FP value cannot fit in the integer type, the results are undefined.
FP_TO_SINT, FP_TO_SINT,
FP_TO_UINT, FP_TO_UINT,
/// X = FP_ROUND(Y, TRUNC) - Rounding 'Y' from a larger floating point type /// X = FP_ROUND(Y, TRUNC) - Rounding 'Y' from a larger floating point type
/// down to the precision of the destination VT. TRUNC is a flag, which is /// down to the precision of the destination VT. TRUNC is a flag, which is
/// always an integer that is zero or one. If TRUNC is 0, this is a /// always an integer that is zero or one. If TRUNC is 0, this is a
/// normal rounding, if it is 1, this FP_ROUND is known to not change the /// normal rounding, if it is 1, this FP_ROUND is known to not change the
/// value of Y. /// value of Y.
/// ///
/// The TRUNC = 1 case is used in cases where we know that the value will /// The TRUNC = 1 case is used in cases where we know that the value will
/// not be modified by the node, because Y is not using any of the extra /// not be modified by the node, because Y is not using any of the extra
/// precision of source type. This allows certain transformations like /// precision of source type. This allows certain transformations like
/// FP_EXTEND(FP_ROUND(X,1)) -> X which are not safe for /// FP_EXTEND(FP_ROUND(X,1)) -> X which are not safe for
/// FP_EXTEND(FP_ROUND(X,0)) because the extra bits aren't removed. /// FP_EXTEND(FP_ROUND(X,0)) because the extra bits aren't removed.
FP_ROUND, FP_ROUND,
/// FLT_ROUNDS_ - Returns current rounding mode: /// FLT_ROUNDS_ - Returns current rounding mode:
/// -1 Undefined /// -1 Undefined
/// 0 Round to 0 /// 0 Round to 0
/// 1 Round to nearest /// 1 Round to nearest
/// 2 Round to +inf /// 2 Round to +inf
/// 3 Round to -inf /// 3 Round to -inf
/// Result is rounding mode and chain. Input is a chain. /// Result is rounding mode and chain. Input is a chain.
FLT_ROUNDS_, FLT_ROUNDS_,
/// X = FP_EXTEND(Y) - Extend a smaller FP type into a larger FP type. /// X = FP_EXTEND(Y) - Extend a smaller FP type into a larger FP type.
FP_EXTEND, FP_EXTEND,
/// BITCAST - This operator converts between integer, vector and FP /// BITCAST - This operator converts between integer, vector and FP
/// values, as if the value was stored to memory with one type and loaded /// values, as if the value was stored to memory with one type and loaded
/// from the same address with the other type (or equivalently for vector /// from the same address with the other type (or equivalently for vector
/// format conversions, etc). The source and result are required to have /// format conversions, etc). The source and result are required to have
/// the same bit size (e.g. f32 <-> i32). This can also be used for /// the same bit size (e.g. f32 <-> i32). This can also be used for
/// int-to-int or fp-to-fp conversions, but that is a noop, deleted by /// int-to-int or fp-to-fp conversions, but that is a noop, deleted by
/// getNode(). /// getNode().
/// ///
/// This operator is subtly different from the bitcast instruction from /// This operator is subtly different from the bitcast instruction from
/// LLVM-IR since this node may change the bits in the register. For /// LLVM-IR since this node may change the bits in the register. For
/// example, this occurs on big-endian NEON and big-endian MSA where the /// example, this occurs on big-endian NEON and big-endian MSA where the
/// layout of the bits in the register depends on the vector type and this /// layout of the bits in the register depends on the vector type and this
/// operator acts as a shuffle operation for some vector type combinations. /// operator acts as a shuffle operation for some vector type combinations.
BITCAST, BITCAST,
/// ADDRSPACECAST - This operator converts between pointers of different /// ADDRSPACECAST - This operator converts between pointers of different
/// address spaces. /// address spaces.
ADDRSPACECAST, ADDRSPACECAST,
/// FP16_TO_FP, FP_TO_FP16 - These operators are used to perform promotions /// FP16_TO_FP, FP_TO_FP16 - These operators are used to perform promotions
/// and truncation for half-precision (16 bit) floating numbers. These nodes /// and truncation for half-precision (16 bit) floating numbers. These nodes
/// form a semi-softened interface for dealing with f16 (as an i16), which /// form a semi-softened interface for dealing with f16 (as an i16), which
/// is often a storage-only type but has native conversions. /// is often a storage-only type but has native conversions.
FP16_TO_FP, FP_TO_FP16, FP16_TO_FP,
STRICT_FP16_TO_FP, STRICT_FP_TO_FP16, FP_TO_FP16,
STRICT_FP16_TO_FP,
STRICT_FP_TO_FP16,
/// Perform various unary floating-point operations inspired by libm. For /// Perform various unary floating-point operations inspired by libm. For
/// FPOWI, the result is undefined if if the integer operand doesn't fit /// FPOWI, the result is undefined if if the integer operand doesn't fit
/// into 32 bits. /// into 32 bits.
FNEG, FABS, FSQRT, FCBRT, FSIN, FCOS, FPOWI, FPOW, FNEG,
FLOG, FLOG2, FLOG10, FEXP, FEXP2, FABS,
FCEIL, FTRUNC, FRINT, FNEARBYINT, FROUND, FFLOOR, FSQRT,
LROUND, LLROUND, LRINT, LLRINT, FCBRT,
FSIN,
FCOS,
FPOWI,
FPOW,
FLOG,
FLOG2,
FLOG10,
FEXP,
FEXP2,
FCEIL,
FTRUNC,
FRINT,
FNEARBYINT,
FROUND,
FFLOOR,
LROUND,
LLROUND,
LRINT,
LLRINT,
/// FMINNUM/FMAXNUM - Perform floating-point minimum or maximum on two /// FMINNUM/FMAXNUM - Perform floating-point minimum or maximum on two
/// values. /// values.
// //
/// In the case where a single input is a NaN (either signaling or quiet), /// In the case where a single input is a NaN (either signaling or quiet),
/// the non-NaN input is returned. /// the non-NaN input is returned.
/// ///
/// The return value of (FMINNUM 0.0, -0.0) could be either 0.0 or -0.0. /// The return value of (FMINNUM 0.0, -0.0) could be either 0.0 or -0.0.
FMINNUM, FMAXNUM, FMINNUM,
FMAXNUM,
/// FMINNUM_IEEE/FMAXNUM_IEEE - Perform floating-point minimum or maximum on /// FMINNUM_IEEE/FMAXNUM_IEEE - Perform floating-point minimum or maximum on
/// two values, following the IEEE-754 2008 definition. This differs from /// two values, following the IEEE-754 2008 definition. This differs from
/// FMINNUM/FMAXNUM in the handling of signaling NaNs. If one input is a /// FMINNUM/FMAXNUM in the handling of signaling NaNs. If one input is a
/// signaling NaN, returns a quiet NaN. /// signaling NaN, returns a quiet NaN.
FMINNUM_IEEE, FMAXNUM_IEEE, FMINNUM_IEEE,
FMAXNUM_IEEE,
/// FMINIMUM/FMAXIMUM - NaN-propagating minimum/maximum that also treat -0.0 /// FMINIMUM/FMAXIMUM - NaN-propagating minimum/maximum that also treat -0.0
/// as less than 0.0. While FMINNUM_IEEE/FMAXNUM_IEEE follow IEEE 754-2008 /// as less than 0.0. While FMINNUM_IEEE/FMAXNUM_IEEE follow IEEE 754-2008
/// semantics, FMINIMUM/FMAXIMUM follow IEEE 754-2018 draft semantics. /// semantics, FMINIMUM/FMAXIMUM follow IEEE 754-2018 draft semantics.
FMINIMUM, FMAXIMUM, FMINIMUM,
FMAXIMUM,
/// FSINCOS - Compute both fsin and fcos as a single operation. /// FSINCOS - Compute both fsin and fcos as a single operation.
FSINCOS, FSINCOS,
/// LOAD and STORE have token chains as their first operand, then the same /// LOAD and STORE have token chains as their first operand, then the same
/// operands as an LLVM load/store instruction, then an offset node that /// operands as an LLVM load/store instruction, then an offset node that
/// is added / subtracted from the base pointer to form the address (for /// is added / subtracted from the base pointer to form the address (for
/// indexed memory ops). /// indexed memory ops).
LOAD, STORE, LOAD,
STORE,
/// DYNAMIC_STACKALLOC - Allocate some number of bytes on the stack aligned /// DYNAMIC_STACKALLOC - Allocate some number of bytes on the stack aligned
/// to a specified boundary. This node always has two return values: a new /// to a specified boundary. This node always has two return values: a new
/// stack pointer value and a chain. The first operand is the token chain, /// stack pointer value and a chain. The first operand is the token chain,
/// the second is the number of bytes to allocate, and the third is the /// the second is the number of bytes to allocate, and the third is the
/// alignment boundary. The size is guaranteed to be a multiple of the /// alignment boundary. The size is guaranteed to be a multiple of the
/// stack alignment, and the alignment is guaranteed to be bigger than the /// stack alignment, and the alignment is guaranteed to be bigger than the
/// stack alignment (if required) or 0 to get standard stack alignment. /// stack alignment (if required) or 0 to get standard stack alignment.
DYNAMIC_STACKALLOC, DYNAMIC_STACKALLOC,
/// Control flow instructions. These all have token chains. /// Control flow instructions. These all have token chains.
/// BR - Unconditional branch. The first operand is the chain /// BR - Unconditional branch. The first operand is the chain
/// operand, the second is the MBB to branch to. /// operand, the second is the MBB to branch to.
BR, BR,
/// BRIND - Indirect branch. The first operand is the chain, the second /// BRIND - Indirect branch. The first operand is the chain, the second
/// is the value to branch to, which must be of the same type as the /// is the value to branch to, which must be of the same type as the
/// target's pointer type. /// target's pointer type.
BRIND, BRIND,
/// BR_JT - Jumptable branch. The first operand is the chain, the second /// BR_JT - Jumptable branch. The first operand is the chain, the second
/// is the jumptable index, the last one is the jumptable entry index. /// is the jumptable index, the last one is the jumptable entry index.
BR_JT, BR_JT,
/// BRCOND - Conditional branch. The first operand is the chain, the /// BRCOND - Conditional branch. The first operand is the chain, the
/// second is the condition, the third is the block to branch to if the /// second is the condition, the third is the block to branch to if the
/// condition is true. If the type of the condition is not i1, then the /// condition is true. If the type of the condition is not i1, then the
/// high bits must conform to getBooleanContents. /// high bits must conform to getBooleanContents.
BRCOND, BRCOND,
/// BR_CC - Conditional branch. The behavior is like that of SELECT_CC, in /// BR_CC - Conditional branch. The behavior is like that of SELECT_CC, in
/// that the condition is represented as condition code, and two nodes to /// that the condition is represented as condition code, and two nodes to
/// compare, rather than as a combined SetCC node. The operands in order /// compare, rather than as a combined SetCC node. The operands in order
/// are chain, cc, lhs, rhs, block to branch to if condition is true. /// are chain, cc, lhs, rhs, block to branch to if condition is true.
BR_CC, BR_CC,
/// INLINEASM - Represents an inline asm block. This node always has two /// INLINEASM - Represents an inline asm block. This node always has two
/// return values: a chain and a flag result. The inputs are as follows: /// return values: a chain and a flag result. The inputs are as follows:
/// Operand #0 : Input chain. /// Operand #0 : Input chain.
/// Operand #1 : a ExternalSymbolSDNode with a pointer to the asm string. /// Operand #1 : a ExternalSymbolSDNode with a pointer to the asm string.
/// Operand #2 : a MDNodeSDNode with the !srcloc metadata. /// Operand #2 : a MDNodeSDNode with the !srcloc metadata.
/// Operand #3 : HasSideEffect, IsAlignStack bits. /// Operand #3 : HasSideEffect, IsAlignStack bits.
/// After this, it is followed by a list of operands with this format: /// After this, it is followed by a list of operands with this format:
/// ConstantSDNode: Flags that encode whether it is a mem or not, the /// ConstantSDNode: Flags that encode whether it is a mem or not, the
/// of operands that follow, etc. See InlineAsm.h. /// of operands that follow, etc. See InlineAsm.h.
/// ... however many operands ... /// ... however many operands ...
/// Operand #last: Optional, an incoming flag. /// Operand #last: Optional, an incoming flag.
/// ///
/// The variable width operands are required to represent target addressing /// The variable width operands are required to represent target addressing
/// modes as a single "operand", even though they may have multiple /// modes as a single "operand", even though they may have multiple
/// SDOperands. /// SDOperands.
INLINEASM, INLINEASM,
/// INLINEASM_BR - Terminator version of inline asm. Used by asm-goto. /// INLINEASM_BR - Terminator version of inline asm. Used by asm-goto.
INLINEASM_BR, INLINEASM_BR,
/// EH_LABEL - Represents a label in mid basic block used to track /// EH_LABEL - Represents a label in mid basic block used to track
/// locations needed for debug and exception handling tables. These nodes /// locations needed for debug and exception handling tables. These nodes
/// take a chain as input and return a chain. /// take a chain as input and return a chain.
EH_LABEL, EH_LABEL,
/// ANNOTATION_LABEL - Represents a mid basic block label used by /// ANNOTATION_LABEL - Represents a mid basic block label used by
/// annotations. This should remain within the basic block and be ordered /// annotations. This should remain within the basic block and be ordered
/// with respect to other call instructions, but loads and stores may float /// with respect to other call instructions, but loads and stores may float
/// past it. /// past it.
ANNOTATION_LABEL, ANNOTATION_LABEL,
/// CATCHRET - Represents a return from a catch block funclet. Used for /// CATCHRET - Represents a return from a catch block funclet. Used for
/// MSVC compatible exception handling. Takes a chain operand and a /// MSVC compatible exception handling. Takes a chain operand and a
/// destination basic block operand. /// destination basic block operand.
CATCHRET, CATCHRET,
/// CLEANUPRET - Represents a return from a cleanup block funclet. Used for /// CLEANUPRET - Represents a return from a cleanup block funclet. Used for
/// MSVC compatible exception handling. Takes only a chain operand. /// MSVC compatible exception handling. Takes only a chain operand.
CLEANUPRET, CLEANUPRET,
/// STACKSAVE - STACKSAVE has one operand, an input chain. It produces a /// STACKSAVE - STACKSAVE has one operand, an input chain. It produces a
/// value, the same type as the pointer type for the system, and an output /// value, the same type as the pointer type for the system, and an output
/// chain. /// chain.
STACKSAVE, STACKSAVE,
/// STACKRESTORE has two operands, an input chain and a pointer to restore /// STACKRESTORE has two operands, an input chain and a pointer to restore
/// to it returns an output chain. /// to it returns an output chain.
STACKRESTORE, STACKRESTORE,
/// CALLSEQ_START/CALLSEQ_END - These operators mark the beginning and end /// CALLSEQ_START/CALLSEQ_END - These operators mark the beginning and end
/// of a call sequence, and carry arbitrary information that target might /// of a call sequence, and carry arbitrary information that target might
/// want to know. The first operand is a chain, the rest are specified by /// want to know. The first operand is a chain, the rest are specified by
/// the target and not touched by the DAG optimizers. /// the target and not touched by the DAG optimizers.
/// Targets that may use stack to pass call arguments define additional /// Targets that may use stack to pass call arguments define additional
/// operands: /// operands:
/// - size of the call frame part that must be set up within the /// - size of the call frame part that must be set up within the
/// CALLSEQ_START..CALLSEQ_END pair, /// CALLSEQ_START..CALLSEQ_END pair,
/// - part of the call frame prepared prior to CALLSEQ_START. /// - part of the call frame prepared prior to CALLSEQ_START.
/// Both these parameters must be constants, their sum is the total call /// Both these parameters must be constants, their sum is the total call
/// frame size. /// frame size.
/// CALLSEQ_START..CALLSEQ_END pairs may not be nested. /// CALLSEQ_START..CALLSEQ_END pairs may not be nested.
CALLSEQ_START, // Beginning of a call sequence CALLSEQ_START, // Beginning of a call sequence
CALLSEQ_END, // End of a call sequence CALLSEQ_END, // End of a call sequence
/// VAARG - VAARG has four operands: an input chain, a pointer, a SRCVALUE, /// VAARG - VAARG has four operands: an input chain, a pointer, a SRCVALUE,
/// and the alignment. It returns a pair of values: the vaarg value and a /// and the alignment. It returns a pair of values: the vaarg value and a
/// new chain. /// new chain.
VAARG, VAARG,
/// VACOPY - VACOPY has 5 operands: an input chain, a destination pointer, /// VACOPY - VACOPY has 5 operands: an input chain, a destination pointer,
/// a source pointer, a SRCVALUE for the destination, and a SRCVALUE for the /// a source pointer, a SRCVALUE for the destination, and a SRCVALUE for the
/// source. /// source.
VACOPY, VACOPY,
/// VAEND, VASTART - VAEND and VASTART have three operands: an input chain, /// VAEND, VASTART - VAEND and VASTART have three operands: an input chain,
/// pointer, and a SRCVALUE. /// pointer, and a SRCVALUE.
VAEND, VASTART, VAEND,
VASTART,
/// SRCVALUE - This is a node type that holds a Value* that is used to /// SRCVALUE - This is a node type that holds a Value* that is used to
/// make reference to a value in the LLVM IR. /// make reference to a value in the LLVM IR.
SRCVALUE, SRCVALUE,
/// MDNODE_SDNODE - This is a node that holdes an MDNode*, which is used to /// MDNODE_SDNODE - This is a node that holdes an MDNode*, which is used to
/// reference metadata in the IR. /// reference metadata in the IR.
MDNODE_SDNODE, MDNODE_SDNODE,
/// PCMARKER - This corresponds to the pcmarker intrinsic. /// PCMARKER - This corresponds to the pcmarker intrinsic.
PCMARKER, PCMARKER,
/// READCYCLECOUNTER - This corresponds to the readcyclecounter intrinsic. /// READCYCLECOUNTER - This corresponds to the readcyclecounter intrinsic.
/// It produces a chain and one i64 value. The only operand is a chain. /// It produces a chain and one i64 value. The only operand is a chain.
/// If i64 is not legal, the result will be expanded into smaller values. /// If i64 is not legal, the result will be expanded into smaller values.
/// Still, it returns an i64, so targets should set legality for i64. /// Still, it returns an i64, so targets should set legality for i64.
/// The result is the content of the architecture-specific cycle /// The result is the content of the architecture-specific cycle
/// counter-like register (or other high accuracy low latency clock source). /// counter-like register (or other high accuracy low latency clock source).
READCYCLECOUNTER, READCYCLECOUNTER,
/// HANDLENODE node - Used as a handle for various purposes. /// HANDLENODE node - Used as a handle for various purposes.
HANDLENODE, HANDLENODE,
/// INIT_TRAMPOLINE - This corresponds to the init_trampoline intrinsic. It /// INIT_TRAMPOLINE - This corresponds to the init_trampoline intrinsic. It
/// takes as input a token chain, the pointer to the trampoline, the pointer /// takes as input a token chain, the pointer to the trampoline, the pointer
/// to the nested function, the pointer to pass for the 'nest' parameter, a /// to the nested function, the pointer to pass for the 'nest' parameter, a
/// SRCVALUE for the trampoline and another for the nested function /// SRCVALUE for the trampoline and another for the nested function
/// (allowing targets to access the original Function*). /// (allowing targets to access the original Function*).
/// It produces a token chain as output. /// It produces a token chain as output.
INIT_TRAMPOLINE, INIT_TRAMPOLINE,
/// ADJUST_TRAMPOLINE - This corresponds to the adjust_trampoline intrinsic. /// ADJUST_TRAMPOLINE - This corresponds to the adjust_trampoline intrinsic.
/// It takes a pointer to the trampoline and produces a (possibly) new /// It takes a pointer to the trampoline and produces a (possibly) new
/// pointer to the same trampoline with platform-specific adjustments /// pointer to the same trampoline with platform-specific adjustments
/// applied. The pointer it returns points to an executable block of code. /// applied. The pointer it returns points to an executable block of code.
ADJUST_TRAMPOLINE, ADJUST_TRAMPOLINE,
/// TRAP - Trapping instruction /// TRAP - Trapping instruction
TRAP, TRAP,
/// DEBUGTRAP - Trap intended to get the attention of a debugger. /// DEBUGTRAP - Trap intended to get the attention of a debugger.
DEBUGTRAP, DEBUGTRAP,
/// PREFETCH - This corresponds to a prefetch intrinsic. The first operand /// PREFETCH - This corresponds to a prefetch intrinsic. The first operand
/// is the chain. The other operands are the address to prefetch, /// is the chain. The other operands are the address to prefetch,
/// read / write specifier, locality specifier and instruction / data cache /// read / write specifier, locality specifier and instruction / data cache
/// specifier. /// specifier.
PREFETCH, PREFETCH,
/// OUTCHAIN = ATOMIC_FENCE(INCHAIN, ordering, scope) /// OUTCHAIN = ATOMIC_FENCE(INCHAIN, ordering, scope)
/// This corresponds to the fence instruction. It takes an input chain, and /// This corresponds to the fence instruction. It takes an input chain, and
/// two integer constants: an AtomicOrdering and a SynchronizationScope. /// two integer constants: an AtomicOrdering and a SynchronizationScope.
ATOMIC_FENCE, ATOMIC_FENCE,
/// Val, OUTCHAIN = ATOMIC_LOAD(INCHAIN, ptr) /// Val, OUTCHAIN = ATOMIC_LOAD(INCHAIN, ptr)
/// This corresponds to "load atomic" instruction. /// This corresponds to "load atomic" instruction.
ATOMIC_LOAD, ATOMIC_LOAD,
/// OUTCHAIN = ATOMIC_STORE(INCHAIN, ptr, val) /// OUTCHAIN = ATOMIC_STORE(INCHAIN, ptr, val)
/// This corresponds to "store atomic" instruction. /// This corresponds to "store atomic" instruction.
ATOMIC_STORE, ATOMIC_STORE,
/// Val, OUTCHAIN = ATOMIC_CMP_SWAP(INCHAIN, ptr, cmp, swap) /// Val, OUTCHAIN = ATOMIC_CMP_SWAP(INCHAIN, ptr, cmp, swap)
/// For double-word atomic operations: /// For double-word atomic operations:
/// ValLo, ValHi, OUTCHAIN = ATOMIC_CMP_SWAP(INCHAIN, ptr, cmpLo, cmpHi, /// ValLo, ValHi, OUTCHAIN = ATOMIC_CMP_SWAP(INCHAIN, ptr, cmpLo, cmpHi,
/// swapLo, swapHi) /// swapLo, swapHi)
/// This corresponds to the cmpxchg instruction. /// This corresponds to the cmpxchg instruction.
ATOMIC_CMP_SWAP, ATOMIC_CMP_SWAP,
/// Val, Success, OUTCHAIN /// Val, Success, OUTCHAIN
/// = ATOMIC_CMP_SWAP_WITH_SUCCESS(INCHAIN, ptr, cmp, swap) /// = ATOMIC_CMP_SWAP_WITH_SUCCESS(INCHAIN, ptr, cmp, swap)
/// N.b. this is still a strong cmpxchg operation, so /// N.b. this is still a strong cmpxchg operation, so
/// Success == "Val == cmp". /// Success == "Val == cmp".
ATOMIC_CMP_SWAP_WITH_SUCCESS, ATOMIC_CMP_SWAP_WITH_SUCCESS,
/// Val, OUTCHAIN = ATOMIC_SWAP(INCHAIN, ptr, amt) /// Val, OUTCHAIN = ATOMIC_SWAP(INCHAIN, ptr, amt)
/// Val, OUTCHAIN = ATOMIC_LOAD_[OpName](INCHAIN, ptr, amt) /// Val, OUTCHAIN = ATOMIC_LOAD_[OpName](INCHAIN, ptr, amt)
/// For double-word atomic operations: /// For double-word atomic operations:
/// ValLo, ValHi, OUTCHAIN = ATOMIC_SWAP(INCHAIN, ptr, amtLo, amtHi) /// ValLo, ValHi, OUTCHAIN = ATOMIC_SWAP(INCHAIN, ptr, amtLo, amtHi)
/// ValLo, ValHi, OUTCHAIN = ATOMIC_LOAD_[OpName](INCHAIN, ptr, amtLo, amtHi) /// ValLo, ValHi, OUTCHAIN = ATOMIC_LOAD_[OpName](INCHAIN, ptr, amtLo, amtHi)
/// These correspond to the atomicrmw instruction. /// These correspond to the atomicrmw instruction.
ATOMIC_SWAP, ATOMIC_SWAP,
ATOMIC_LOAD_ADD, ATOMIC_LOAD_ADD,
ATOMIC_LOAD_SUB, ATOMIC_LOAD_SUB,
ATOMIC_LOAD_AND, ATOMIC_LOAD_AND,
ATOMIC_LOAD_CLR, ATOMIC_LOAD_CLR,
ATOMIC_LOAD_OR, ATOMIC_LOAD_OR,
ATOMIC_LOAD_XOR, ATOMIC_LOAD_XOR,
ATOMIC_LOAD_NAND, ATOMIC_LOAD_NAND,
ATOMIC_LOAD_MIN, ATOMIC_LOAD_MIN,
ATOMIC_LOAD_MAX, ATOMIC_LOAD_MAX,
ATOMIC_LOAD_UMIN, ATOMIC_LOAD_UMIN,
ATOMIC_LOAD_UMAX, ATOMIC_LOAD_UMAX,
ATOMIC_LOAD_FADD, ATOMIC_LOAD_FADD,
ATOMIC_LOAD_FSUB, ATOMIC_LOAD_FSUB,
// Masked load and store - consecutive vector load and store operations // Masked load and store - consecutive vector load and store operations
// with additional mask operand that prevents memory accesses to the // with additional mask operand that prevents memory accesses to the
// masked-off lanes. // masked-off lanes.
// //
// Val, OutChain = MLOAD(BasePtr, Mask, PassThru) // Val, OutChain = MLOAD(BasePtr, Mask, PassThru)
// OutChain = MSTORE(Value, BasePtr, Mask) // OutChain = MSTORE(Value, BasePtr, Mask)
MLOAD, MSTORE, MLOAD,
MSTORE,
// Masked gather and scatter - load and store operations for a vector of // Masked gather and scatter - load and store operations for a vector of
// random addresses with additional mask operand that prevents memory // random addresses with additional mask operand that prevents memory
// accesses to the masked-off lanes. // accesses to the masked-off lanes.
// //
// Val, OutChain = GATHER(InChain, PassThru, Mask, BasePtr, Index, Scale) // Val, OutChain = GATHER(InChain, PassThru, Mask, BasePtr, Index, Scale)
// OutChain = SCATTER(InChain, Value, Mask, BasePtr, Index, Scale) // OutChain = SCATTER(InChain, Value, Mask, BasePtr, Index, Scale)
// //
// The Index operand can have more vector elements than the other operands // The Index operand can have more vector elements than the other operands
// due to type legalization. The extra elements are ignored. // due to type legalization. The extra elements are ignored.
MGATHER, MSCATTER, MGATHER,
MSCATTER,
/// This corresponds to the llvm.lifetime.* intrinsics. The first operand /// This corresponds to the llvm.lifetime.* intrinsics. The first operand
/// is the chain and the second operand is the alloca pointer. /// is the chain and the second operand is the alloca pointer.
LIFETIME_START, LIFETIME_END, LIFETIME_START,
LIFETIME_END,
/// GC_TRANSITION_START/GC_TRANSITION_END - These operators mark the /// GC_TRANSITION_START/GC_TRANSITION_END - These operators mark the
/// beginning and end of GC transition sequence, and carry arbitrary /// beginning and end of GC transition sequence, and carry arbitrary
/// information that target might need for lowering. The first operand is /// information that target might need for lowering. The first operand is
/// a chain, the rest are specified by the target and not touched by the DAG /// a chain, the rest are specified by the target and not touched by the DAG
/// optimizers. GC_TRANSITION_START..GC_TRANSITION_END pairs may not be /// optimizers. GC_TRANSITION_START..GC_TRANSITION_END pairs may not be
/// nested. /// nested.
GC_TRANSITION_START, GC_TRANSITION_START,
GC_TRANSITION_END, GC_TRANSITION_END,
/// GET_DYNAMIC_AREA_OFFSET - get offset from native SP to the address of /// GET_DYNAMIC_AREA_OFFSET - get offset from native SP to the address of
/// the most recent dynamic alloca. For most targets that would be 0, but /// the most recent dynamic alloca. For most targets that would be 0, but
/// for some others (e.g. PowerPC, PowerPC64) that would be compile-time /// for some others (e.g. PowerPC, PowerPC64) that would be compile-time
/// known nonzero constant. The only operand here is the chain. /// known nonzero constant. The only operand here is the chain.
GET_DYNAMIC_AREA_OFFSET, GET_DYNAMIC_AREA_OFFSET,
/// VSCALE(IMM) - Returns the runtime scaling factor used to calculate the /// VSCALE(IMM) - Returns the runtime scaling factor used to calculate the
/// number of elements within a scalable vector. IMM is a constant integer /// number of elements within a scalable vector. IMM is a constant integer
/// multiplier that is applied to the runtime value. /// multiplier that is applied to the runtime value.
VSCALE, VSCALE,
/// Generic reduction nodes. These nodes represent horizontal vector /// Generic reduction nodes. These nodes represent horizontal vector
/// reduction operations, producing a scalar result. /// reduction operations, producing a scalar result.
/// The STRICT variants perform reductions in sequential order. The first /// The STRICT variants perform reductions in sequential order. The first
/// operand is an initial scalar accumulator value, and the second operand /// operand is an initial scalar accumulator value, and the second operand
/// is the vector to reduce. /// is the vector to reduce.
VECREDUCE_STRICT_FADD, VECREDUCE_STRICT_FMUL, VECREDUCE_STRICT_FADD,
VECREDUCE_STRICT_FMUL,
/// These reductions are non-strict, and have a single vector operand. /// These reductions are non-strict, and have a single vector operand.
VECREDUCE_FADD, VECREDUCE_FMUL, VECREDUCE_FADD,
VECREDUCE_FMUL,
/// FMIN/FMAX nodes can have flags, for NaN/NoNaN variants. /// FMIN/FMAX nodes can have flags, for NaN/NoNaN variants.
VECREDUCE_FMAX, VECREDUCE_FMIN, VECREDUCE_FMAX,
VECREDUCE_FMIN,
/// Integer reductions may have a result type larger than the vector element /// Integer reductions may have a result type larger than the vector element
/// type. However, the reduction is performed using the vector element type /// type. However, the reduction is performed using the vector element type
/// and the value in the top bits is unspecified. /// and the value in the top bits is unspecified.
VECREDUCE_ADD, VECREDUCE_MUL, VECREDUCE_ADD,
VECREDUCE_AND, VECREDUCE_OR, VECREDUCE_XOR, VECREDUCE_MUL,
VECREDUCE_SMAX, VECREDUCE_SMIN, VECREDUCE_UMAX, VECREDUCE_UMIN, VECREDUCE_AND,
VECREDUCE_OR,
VECREDUCE_XOR,
VECREDUCE_SMAX,
VECREDUCE_SMIN,
VECREDUCE_UMAX,
VECREDUCE_UMIN,
/// BUILTIN_OP_END - This must be the last enum value in this list. /// BUILTIN_OP_END - This must be the last enum value in this list.
/// The target-specific pre-isel opcode values start here. /// The target-specific pre-isel opcode values start here.
BUILTIN_OP_END BUILTIN_OP_END
}; };
/// FIRST_TARGET_STRICTFP_OPCODE - Target-specific pre-isel operations /// FIRST_TARGET_STRICTFP_OPCODE - Target-specific pre-isel operations
/// which cannot raise FP exceptions should be less than this value. /// which cannot raise FP exceptions should be less than this value.
/// Those that do must not be less than this value. /// Those that do must not be less than this value.
static const int FIRST_TARGET_STRICTFP_OPCODE = BUILTIN_OP_END+400; static const int FIRST_TARGET_STRICTFP_OPCODE = BUILTIN_OP_END + 400;
/// FIRST_TARGET_MEMORY_OPCODE - Target-specific pre-isel operations /// FIRST_TARGET_MEMORY_OPCODE - Target-specific pre-isel operations
/// which do not reference a specific memory location should be less than /// which do not reference a specific memory location should be less than
/// this value. Those that do must not be less than this value, and can /// this value. Those that do must not be less than this value, and can
/// be used with SelectionDAG::getMemIntrinsicNode. /// be used with SelectionDAG::getMemIntrinsicNode.
static const int FIRST_TARGET_MEMORY_OPCODE = BUILTIN_OP_END+500; static const int FIRST_TARGET_MEMORY_OPCODE = BUILTIN_OP_END + 500;
//===--------------------------------------------------------------------===// //===--------------------------------------------------------------------===//
/// MemIndexedMode enum - This enum defines the load / store indexed /// MemIndexedMode enum - This enum defines the load / store indexed
/// addressing modes. /// addressing modes.
/// ///
/// UNINDEXED "Normal" load / store. The effective address is already /// UNINDEXED "Normal" load / store. The effective address is already
/// computed and is available in the base pointer. The offset /// computed and is available in the base pointer. The offset
/// operand is always undefined. In addition to producing a /// operand is always undefined. In addition to producing a
/// chain, an unindexed load produces one value (result of the /// chain, an unindexed load produces one value (result of the
/// load); an unindexed store does not produce a value. /// load); an unindexed store does not produce a value.
/// ///
/// PRE_INC Similar to the unindexed mode where the effective address is /// PRE_INC Similar to the unindexed mode where the effective address is
/// PRE_DEC the value of the base pointer add / subtract the offset. /// PRE_DEC the value of the base pointer add / subtract the offset.
/// It considers the computation as being folded into the load / /// It considers the computation as being folded into the load /
/// store operation (i.e. the load / store does the address /// store operation (i.e. the load / store does the address
/// computation as well as performing the memory transaction). /// computation as well as performing the memory transaction).
/// The base operand is always undefined. In addition to /// The base operand is always undefined. In addition to
/// producing a chain, pre-indexed load produces two values /// producing a chain, pre-indexed load produces two values
/// (result of the load and the result of the address /// (result of the load and the result of the address
/// computation); a pre-indexed store produces one value (result /// computation); a pre-indexed store produces one value (result
/// of the address computation). /// of the address computation).
/// ///
/// POST_INC The effective address is the value of the base pointer. The /// POST_INC The effective address is the value of the base pointer. The
/// POST_DEC value of the offset operand is then added to / subtracted /// POST_DEC value of the offset operand is then added to / subtracted
/// from the base after memory transaction. In addition to /// from the base after memory transaction. In addition to
/// producing a chain, post-indexed load produces two values /// producing a chain, post-indexed load produces two values
/// (the result of the load and the result of the base +/- offset /// (the result of the load and the result of the base +/- offset
/// computation); a post-indexed store produces one value (the /// computation); a post-indexed store produces one value (the
/// the result of the base +/- offset computation). /// the result of the base +/- offset computation).
enum MemIndexedMode { enum MemIndexedMode { UNINDEXED = 0, PRE_INC, PRE_DEC, POST_INC, POST_DEC };
UNINDEXED = 0,
PRE_INC,
PRE_DEC,
POST_INC,
POST_DEC
};
static const int LAST_INDEXED_MODE = POST_DEC + 1; static const int LAST_INDEXED_MODE = POST_DEC + 1;
//===--------------------------------------------------------------------===// //===--------------------------------------------------------------------===//
/// MemIndexType enum - This enum defines how to interpret MGATHER/SCATTER's /// MemIndexType enum - This enum defines how to interpret MGATHER/SCATTER's
/// index parameter when calculating addresses. /// index parameter when calculating addresses.
/// ///
/// SIGNED_SCALED Addr = Base + ((signed)Index * sizeof(element)) /// SIGNED_SCALED Addr = Base + ((signed)Index * sizeof(element))
/// SIGNED_UNSCALED Addr = Base + (signed)Index /// SIGNED_UNSCALED Addr = Base + (signed)Index
/// UNSIGNED_SCALED Addr = Base + ((unsigned)Index * sizeof(element)) /// UNSIGNED_SCALED Addr = Base + ((unsigned)Index * sizeof(element))
/// UNSIGNED_UNSCALED Addr = Base + (unsigned)Index /// UNSIGNED_UNSCALED Addr = Base + (unsigned)Index
enum MemIndexType { enum MemIndexType {
SIGNED_SCALED = 0, SIGNED_SCALED = 0,
SIGNED_UNSCALED, SIGNED_UNSCALED,
UNSIGNED_SCALED, UNSIGNED_SCALED,
UNSIGNED_UNSCALED UNSIGNED_UNSCALED
}; };
static const int LAST_MEM_INDEX_TYPE = UNSIGNED_UNSCALED + 1; static const int LAST_MEM_INDEX_TYPE = UNSIGNED_UNSCALED + 1;
//===--------------------------------------------------------------------===// //===--------------------------------------------------------------------===//
/// LoadExtType enum - This enum defines the three variants of LOADEXT /// LoadExtType enum - This enum defines the three variants of LOADEXT
/// (load with extension). /// (load with extension).
/// ///
/// SEXTLOAD loads the integer operand and sign extends it to a larger /// SEXTLOAD loads the integer operand and sign extends it to a larger
/// integer result type. /// integer result type.
/// ZEXTLOAD loads the integer operand and zero extends it to a larger /// ZEXTLOAD loads the integer operand and zero extends it to a larger
/// integer result type. /// integer result type.
/// EXTLOAD is used for two things: floating point extending loads and /// EXTLOAD is used for two things: floating point extending loads and
/// integer extending loads [the top bits are undefined]. /// integer extending loads [the top bits are undefined].
enum LoadExtType { enum LoadExtType { NON_EXTLOAD = 0, EXTLOAD, SEXTLOAD, ZEXTLOAD };
NON_EXTLOAD = 0,
EXTLOAD,
SEXTLOAD,
ZEXTLOAD
};
static const int LAST_LOADEXT_TYPE = ZEXTLOAD + 1; static const int LAST_LOADEXT_TYPE = ZEXTLOAD + 1;
NodeType getExtForLoadExtType(bool IsFP, LoadExtType); NodeType getExtForLoadExtType(bool IsFP, LoadExtType);
//===--------------------------------------------------------------------===// //===--------------------------------------------------------------------===//
/// ISD::CondCode enum - These are ordered carefully to make the bitfields /// ISD::CondCode enum - These are ordered carefully to make the bitfields
/// below work out, when considering SETFALSE (something that never exists /// below work out, when considering SETFALSE (something that never exists
/// dynamically) as 0. "U" -> Unsigned (for integer operands) or Unordered /// dynamically) as 0. "U" -> Unsigned (for integer operands) or Unordered
/// (for floating point), "L" -> Less than, "G" -> Greater than, "E" -> Equal /// (for floating point), "L" -> Less than, "G" -> Greater than, "E" -> Equal
/// to. If the "N" column is 1, the result of the comparison is undefined if /// to. If the "N" column is 1, the result of the comparison is undefined if
/// the input is a NAN. /// the input is a NAN.
/// ///
/// All of these (except for the 'always folded ops') should be handled for /// All of these (except for the 'always folded ops') should be handled for
/// floating point. For integer, only the SETEQ,SETNE,SETLT,SETLE,SETGT, /// floating point. For integer, only the SETEQ,SETNE,SETLT,SETLE,SETGT,
/// SETGE,SETULT,SETULE,SETUGT, and SETUGE opcodes are used. /// SETGE,SETULT,SETULE,SETUGT, and SETUGE opcodes are used.
/// ///
/// Note that these are laid out in a specific order to allow bit-twiddling /// Note that these are laid out in a specific order to allow bit-twiddling
/// to transform conditions. /// to transform conditions.
enum CondCode { enum CondCode {
// Opcode N U L G E Intuitive operation // Opcode N U L G E Intuitive operation
SETFALSE, // 0 0 0 0 Always false (always folded) SETFALSE, // 0 0 0 0 Always false (always folded)
efriedmaUnsubmitted
Done
ReplyInline Actions

Please fix this table so the columns line up again.

efriedma: Please fix this table so the columns line up again.
SETOEQ, // 0 0 0 1 True if ordered and equal SETOEQ, // 0 0 0 1 True if ordered and equal
SETOGT, // 0 0 1 0 True if ordered and greater than SETOGT, // 0 0 1 0 True if ordered and greater than
SETOGE, // 0 0 1 1 True if ordered and greater than or equal SETOGE, // 0 0 1 1 True if ordered and greater than or equal
SETOLT, // 0 1 0 0 True if ordered and less than SETOLT, // 0 1 0 0 True if ordered and less than
SETOLE, // 0 1 0 1 True if ordered and less than or equal SETOLE, // 0 1 0 1 True if ordered and less than or equal
SETONE, // 0 1 1 0 True if ordered and operands are unequal SETONE, // 0 1 1 0 True if ordered and operands are unequal
SETO, // 0 1 1 1 True if ordered (no nans) SETO, // 0 1 1 1 True if ordered (no nans)
SETUO, // 1 0 0 0 True if unordered: isnan(X) | isnan(Y) SETUO, // 1 0 0 0 True if unordered: isnan(X) | isnan(Y)
SETUEQ, // 1 0 0 1 True if unordered or equal SETUEQ, // 1 0 0 1 True if unordered or equal
SETUGT, // 1 0 1 0 True if unordered or greater than SETUGT, // 1 0 1 0 True if unordered or greater than
SETUGE, // 1 0 1 1 True if unordered, greater than, or equal SETUGE, // 1 0 1 1 True if unordered, greater than, or equal
SETULT, // 1 1 0 0 True if unordered or less than SETULT, // 1 1 0 0 True if unordered or less than
SETULE, // 1 1 0 1 True if unordered, less than, or equal SETULE, // 1 1 0 1 True if unordered, less than, or equal
SETUNE, // 1 1 1 0 True if unordered or not equal SETUNE, // 1 1 1 0 True if unordered or not equal
SETTRUE, // 1 1 1 1 Always true (always folded) SETTRUE, // 1 1 1 1 Always true (always folded)
// Don't care operations: undefined if the input is a nan. // Don't care operations: undefined if the input is a nan.
SETFALSE2, // 1 X 0 0 0 Always false (always folded) SETFALSE2, // 1 X 0 0 0 Always false (always folded)
SETEQ, // 1 X 0 0 1 True if equal SETEQ, // 1 X 0 0 1 True if equal
SETGT, // 1 X 0 1 0 True if greater than SETGT, // 1 X 0 1 0 True if greater than
SETGE, // 1 X 0 1 1 True if greater than or equal SETGE, // 1 X 0 1 1 True if greater than or equal
SETLT, // 1 X 1 0 0 True if less than SETLT, // 1 X 1 0 0 True if less than
SETLE, // 1 X 1 0 1 True if less than or equal SETLE, // 1 X 1 0 1 True if less than or equal
SETNE, // 1 X 1 1 0 True if not equal SETNE, // 1 X 1 1 0 True if not equal
SETTRUE2, // 1 X 1 1 1 Always true (always folded) SETTRUE2, // 1 X 1 1 1 Always true (always folded)
SETCC_INVALID // Marker value. SETCC_INVALID // Marker value.
}; };
/// Return true if this is a setcc instruction that performs a signed /// Return true if this is a setcc instruction that performs a signed
/// comparison when used with integer operands. /// comparison when used with integer operands.
inline bool isSignedIntSetCC(CondCode Code) { inline bool isSignedIntSetCC(CondCode Code) {
return Code == SETGT || Code == SETGE || Code == SETLT || Code == SETLE; return Code == SETGT || Code == SETGE || Code == SETLT || Code == SETLE;
} }
/// Return true if this is a setcc instruction that performs an unsigned /// Return true if this is a setcc instruction that performs an unsigned
/// comparison when used with integer operands. /// comparison when used with integer operands.
inline bool isUnsignedIntSetCC(CondCode Code) { inline bool isUnsignedIntSetCC(CondCode Code) {
return Code == SETUGT || Code == SETUGE || Code == SETULT || Code == SETULE; return Code == SETUGT || Code == SETUGE || Code == SETULT || Code == SETULE;
} }
/// Return true if the specified condition returns true if the two operands to /// Return true if the specified condition returns true if the two operands to
/// the condition are equal. Note that if one of the two operands is a NaN, /// the condition are equal. Note that if one of the two operands is a NaN,
/// this value is meaningless. /// this value is meaningless.
inline bool isTrueWhenEqual(CondCode Cond) { inline bool isTrueWhenEqual(CondCode Cond) { return ((int)Cond & 1) != 0; }
return ((int)Cond & 1) != 0;
}
/// This function returns 0 if the condition is always false if an operand is /// This function returns 0 if the condition is always false if an operand is
/// a NaN, 1 if the condition is always true if the operand is a NaN, and 2 if /// a NaN, 1 if the condition is always true if the operand is a NaN, and 2 if
/// the condition is undefined if the operand is a NaN. /// the condition is undefined if the operand is a NaN.
inline unsigned getUnorderedFlavor(CondCode Cond) { inline unsigned getUnorderedFlavor(CondCode Cond) {
return ((int)Cond >> 3) & 3; return ((int)Cond >> 3) & 3;
} }
/// Return the operation corresponding to !(X op Y), where 'op' is a valid /// Return the operation corresponding to !(X op Y), where 'op' is a valid
/// SetCC operation. /// SetCC operation.
CondCode getSetCCInverse(CondCode Operation, EVT Type); CondCode getSetCCInverse(CondCode Operation, EVT Type);
namespace GlobalISel { namespace GlobalISel {
/// Return the operation corresponding to !(X op Y), where 'op' is a valid /// Return the operation corresponding to !(X op Y), where 'op' is a valid
/// SetCC operation. The U bit of the condition code has different meanings /// SetCC operation. The U bit of the condition code has different meanings
/// between floating point and integer comparisons and LLT's don't provide /// between floating point and integer comparisons and LLT's don't provide
/// this distinction. As such we need to be told whether the comparison is /// this distinction. As such we need to be told whether the comparison is
/// floating point or integer-like. Pointers should use integer-like /// floating point or integer-like. Pointers should use integer-like
/// comparisons. /// comparisons.
CondCode getSetCCInverse(CondCode Operation, bool isIntegerLike); CondCode getSetCCInverse(CondCode Operation, bool isIntegerLike);
} // end namespace GlobalISel } // end namespace GlobalISel
/// Return the operation corresponding to (Y op X) when given the operation /// Return the operation corresponding to (Y op X) when given the operation
/// for (X op Y). /// for (X op Y).
CondCode getSetCCSwappedOperands(CondCode Operation); CondCode getSetCCSwappedOperands(CondCode Operation);
/// Return the result of a logical OR between different comparisons of /// Return the result of a logical OR between different comparisons of
/// identical values: ((X op1 Y) | (X op2 Y)). This function returns /// identical values: ((X op1 Y) | (X op2 Y)). This function returns
/// SETCC_INVALID if it is not possible to represent the resultant comparison. /// SETCC_INVALID if it is not possible to represent the resultant comparison.
CondCode getSetCCOrOperation(CondCode Op1, CondCode Op2, EVT Type); CondCode getSetCCOrOperation(CondCode Op1, CondCode Op2, EVT Type);
/// Return the result of a logical AND between different comparisons of /// Return the result of a logical AND between different comparisons of
/// identical values: ((X op1 Y) & (X op2 Y)). This function returns /// identical values: ((X op1 Y) & (X op2 Y)). This function returns
/// SETCC_INVALID if it is not possible to represent the resultant comparison. /// SETCC_INVALID if it is not possible to represent the resultant comparison.
CondCode getSetCCAndOperation(CondCode Op1, CondCode Op2, EVT Type); CondCode getSetCCAndOperation(CondCode Op1, CondCode Op2, EVT Type);
} // end llvm::ISD namespace } // namespace ISD
} // end llvm namespace } // namespace llvm
#endif #endif