[llvm-readobj/llvm-objdump] - Improve how tool locate the dynamic table and report warnings about that.

[grimar]

Summary

Before this patch we gave a priority to a dynamic table found
from the section header.

It was discussed (here: https://reviews.llvm.org/D67078?id=218356#inline-602082)
that probably preferring the table from PT_DYNAMIC is better,
because it is what runtime loader sees.

This patch makes the table from PT_DYNAMIC be chosen at first place if it is available.
But also it adds logic to fall back to SHT_DYNAMIC if the table from the dynamic segment is
broken or fall back to use no table if both are broken.

It adds a few more diagnostic warnings for the logic above.

[grimar]

• A cosmetic cleanup.

[jhenderson]

tools/llvm-readobj/ELFDumper.cpp

1492

dump the dynamic sections -> dump dynamic sections

1503–1504

When we only have information from one of the SHT_DYNAMIC section header or PT_DYNAMIC program header, just use that.

1522–1523

I'd make this error message say "PT_DYNAMIC program header" for consistency, since we call the section header the "SHT_DYNAMIC section header".

1532

header -> program header

1538

"invalid," -> "invalid:"

1541

Delete this blank line

1545

"invalid," -> "invalid:"

[grimar]

• Addressed review comments.

[jhenderson]

LGTM. Probably check with @MaskRay though before committing.

[MaskRay]

tools/llvm-readobj/ELFDumper.cpp

1500

The logic is:

findDynamic
  find PT_DYNAMIC
  find .dynamic
  if p_offset is out of bounds
    reportWarning
  if both PT_DYNAMIC and .dynamic exist
    check if the information matches

loadDynamicTable
  findDynamic()
  if PT_DYNAMIC exists
    IsPhdrTableValid = PT_DYNAMIC's DynRegionInfo is not empty
  if .dynamic exists
    IsSecTableValid = .dynamic's DynRegionInfo is not empty
  if either does not exist
    if (IsPhdrTableValid && IsSecTableValid)
      parseDynamicTable()
    else
      warn
    return

  validate information matches
  ...

Shall we check whether p_offset is out of bounds and whether DynRegionInfo of PT_DYNAMIC is empty together?

findDynamic
  find PT_DYNAMIC
  IsPhdrTableValid = whether PT_DYNAMIC exists
  if p_offset is out of bounds or DynRegionInfo not empty
    reportWarning
    IsPhdrTableValid = false

  find .dynamic
  validate .dynamic

  if either does not exist
    if ((DynamicPhdr && IsPhdrTableValid) || (DynamicSec && IsSecTableValid))
      parseDynamicTable()
    else
      warn
    return

  ...
  validate information matches
  parseDynamicTable()

[grimar]

tools/llvm-readobj/ELFDumper.cpp

1500

I am not sure I understand what you suggest, sorry, Do you want to merge 2 existing methods into one large one?
(I do not understand why your findDynamic might call arseDynamicTable() for example).

[MaskRay]

tools/llvm-readobj/ELFDumper.cpp

1500

Do you want to merge 2 existing methods into one large one?

Yes. Locate PT_DYNAMIC, and do all PT_DYNAMIC specific checks. Then, locate .dynamic, and do all .dynamic related checks. Last, check whether PT_DYNAMIC and .dynamic mismatch.

[grimar]

tools/llvm-readobj/ELFDumper.cpp

1500

Ok. Now things became clear :) I spent some time experimenting with this code while worked on a patch and one of things I tried to achieve was to reduce the amount of the code in each method. I.e. I did splitting intentionally (and was very happy about that), because it looks simpler to me generally to work with a smaller pieces of code.
Even now, looking at loadDynamicTable it seems a bit too large to me.

Are you strong it this suggestion? I.e. I am not sure it will look better, but I do not mind to try to do it again if you really insist.

[MaskRay]

tools/llvm-readobj/ELFDumper.cpp

1500

I am not strong about the suggestion. I think the functions are still long after the split (the current patch). I was trying to figure out why we added so many lines for the extra warnings.

p_offset is out of bounds or DynRegionInfo not empty

I was hoping regrouping the diagnostics can simplify the code, and then there may be other ways to split the function, but maybe I am wrong.

1564

Delete return;

test/tools/llvm-readobj/elf-dynamic-malformed.test

 ## Test handling of a dynamic section size which is not a multiple of its entry size.
 ## Test the full output to demonstrate how we print the warnings.
 
 # RUN: yaml2obj %s --docnum=1 -o %t.bad-size
 # RUN: llvm-readobj --all %t.bad-size 2>&1 \
 # RUN:   | FileCheck %s -DFILE=%t.bad-size --implicit-check-not=warning --check-prefix WARN
 # RUN: llvm-readelf --all %t.bad-size 2>&1 \
 # RUN:   | FileCheck %s -DFILE=%t.bad-size --implicit-check-not=warning --check-prefix WARN-GNU
 
-# WARN-NOT: warning
 # WARN: warning: '[[FILE]]': invalid section size (4) or entity size (16)
+# WARN: warning: '[[FILE]]': invalid section size (4) or entity size (16)
+# WARN: warning: '[[FILE]]': no valid dynamic table was found
 # WARN-EMPTY:
-# WARN-NEXT: File:
-# WARN:      Symbols [
-# WARN:      ]
-# WARN-EMPTY:
-## A warning is printed at the place where a normal dynamic table should be. 
-# WARN-NEXT: warning: '[[FILE]]': invalid section size (4) or entity size (16)
-# WARN-NEXT: ProgramHeaders [
+# WARN: File:
+# WARN: Symbols [
+# WARN: ]
+# WARN: ProgramHeaders [
 
-# WARN-GNU-NOT:  warning
-# WARN-GNU:      warning: '[[FILE]]': invalid section size (4) or entity size (16)
+# WARN-GNU: warning: '[[FILE]]': invalid section size (4) or entity size (16)
+# WARN-GNU: warning: '[[FILE]]': invalid section size (4) or entity size (16)
+# WARN-GNU: warning: '[[FILE]]': no valid dynamic table was found
 # WARN-GNU-NEXT: ELF Header:
 # WARN-GNU:      Symbol table '.symtab' contains 1 entries:
 # WARN-GNU:        0:
-# WARN-GNU-EMPTY:
-## A warning is printed at the place where a normal dynamic table should be. 
-# WARN-GNU:      warning: '[[FILE]]': invalid section size (4) or entity size (16)
-# WARN-GNU-EMPTY:
 
 --- !ELF
 FileHeader:
   Class:   ELFCLASS64
   Data:    ELFDATA2LSB
   Type:    ET_EXEC
   Machine: EM_X86_64
 Sections:

test/tools/llvm-readobj/elf-dynamic-not-in-pt-dynamic.test

-## Show that llvm-readobj/llvm-readelf tools can dump the .dynamic
-## section when it is not in a PT_DYNAMIC segment.
+## Show that llvm-readobj/llvm-readelf tools sometimes can dump the
+## dynamic table when it is not in a PT_DYNAMIC segment.
 
-# RUN: yaml2obj %s -o %t.o
-# RUN: llvm-readobj --dynamic-table %t.o 2>&1 \
-# RUN:   | FileCheck -DFILE=%t.o --check-prefixes=WARNING,LLVM %s
-# RUN: llvm-readelf --dynamic-table %t.o 2>&1 \
-# RUN:   | FileCheck -DFILE=%t.o --check-prefixes=WARNING,GNU %s
-
-# WARNING:   warning: '[[FILE]]': The SHT_DYNAMIC section '.dynamic' is not contained within the PT_DYNAMIC segment
-
-# LLVM:      DynamicSection [ (2 entries)
-# LLVM-NEXT:   Tag                Type     Name/Value
-# LLVM-NEXT:   0x0000000000000018 BIND_NOW 0x1
-# LLVM-NEXT:   0x0000000000000000 NULL     0x0
-# LLVM-NEXT: ]
-
-# GNU:      Dynamic section at offset 0x{{.*}} contains 2 entries:
-# GNU-NEXT:   Tag                Type       Name/Value
-# GNU-NEXT:   0x0000000000000018 (BIND_NOW) 0x1
-# GNU-NEXT:   0x0000000000000000 (NULL)     0x0
+## Case 1: The dynamic table found using the dynamic program header is corrupted
+##         (<size of data> % <size of dynamic entry> != 0). So the table is taken
+##         from the section header.
+
+# RUN: yaml2obj --docnum=1 %s -o %t1.o
+# RUN: llvm-readobj --dynamic-table %t1.o 2>&1 \
+# RUN:   | FileCheck -DFILE=%t1.o --check-prefixes=WARNING1,LLVM1 %s
+# RUN: llvm-readelf --dynamic-table %t1.o 2>&1 \
+# RUN:   | FileCheck -DFILE=%t1.o --check-prefixes=WARNING1,GNU1 %s
+
+# WARNING1: warning: '[[FILE]]': The SHT_DYNAMIC section '.dynamic' is not contained within the PT_DYNAMIC segment
+# WARNING1: warning: '[[FILE]]': invalid section size (1) or entity size (16)
+# WARNING1: warning: '[[FILE]]': SHT_DYNAMIC section header and PT_DYNAMIC disagree about the location of the dynamic table
+# WARNING1: warning: '[[FILE]]': PT_DYNAMIC dynamic table is invalid, SHT_DYNAMIC will be used
+
+# LLVM1:      DynamicSection [ (2 entries)
+# LLVM1-NEXT:   Tag                Type     Name/Value
+# LLVM1-NEXT:   0x0000000000000018 BIND_NOW 0x1
+# LLVM1-NEXT:   0x0000000000000000 NULL     0x0
+# LLVM1-NEXT: ]
+
+# GNU1:      Dynamic section at offset 0x{{.*}} contains 2 entries:
+# GNU1-NEXT:   Tag                Type       Name/Value
+# GNU1-NEXT:   0x0000000000000018 (BIND_NOW) 0x1
+# GNU1-NEXT:   0x0000000000000000 (NULL)     0x0
 
 --- !ELF
 FileHeader:
   Class:   ELFCLASS64
   Data:    ELFDATA2LSB
   Type:    ET_EXEC
   Machine: EM_X86_64
 Sections:
- Type: PT_LOAD
     VAddr: 0x1000
     Sections:
       - Section: .dynamic
       - Section: .text
   - Type: PT_DYNAMIC
     VAddr: 0x1000
     Sections:
       - Section: .text
+
+## Case 2: The dynamic table found using the dynamic program header is different from the
+##         table found using the section header table.
+
+# RUN: yaml2obj --docnum=2 %s -o %t2.o
+# RUN: llvm-readobj --dynamic-table %t2.o 2>&1 \
+# RUN:   | FileCheck -DFILE=%t2.o --check-prefixes=WARNING2,LLVM2 %s
+# RUN: llvm-readelf --dynamic-table %t2.o 2>&1 \
+# RUN:   | FileCheck -DFILE=%t2.o --check-prefixes=WARNING2,GNU2 %s
+
+# WARNING2: warning: '[[FILE]]': The SHT_DYNAMIC section '.dynamic' is not contained within the PT_DYNAMIC segment
+# WARNING2: warning: '[[FILE]]': SHT_DYNAMIC section header and PT_DYNAMIC disagree about the location of the dynamic table
+
+# LLVM2:      DynamicSection [ (1 entries)
+# LLVM2-NEXT:   Tag                Type     Name/Value
+# LLVM2-NEXT:   0x0000000000000000 NULL     0x0
+# LLVM2-NEXT: ]
+
+# GNU2:      Dynamic section at offset 0x{{.*}} contains 1 entries:
+# GNU2-NEXT:   Tag                Type       Name/Value
+# GNU2-NEXT:   0x0000000000000000 (NULL)     0x0
+
+--- !ELF
+FileHeader:
+  Class:   ELFCLASS64
+  Data:    ELFDATA2LSB
+  Type:    ET_EXEC
+  Machine: EM_X86_64
+Sections:
+  - Name: .dynamic
+    Type: SHT_DYNAMIC
+    Flags: [SHF_ALLOC]
+    Address: 0x1000
+    AddressAlign: 0x1000
+    Entries:
+      - Tag:   DT_BIND_NOW
+        Value: 0x1
+      - Tag:   DT_NULL
+        Value: 0x0
+  - Name: .text
+    Type: SHT_PROGBITS
+    Flags: [SHF_ALLOC]
+    Address: 0x1100
+    AddressAlign: 0x100
+    Content: "00000000000000000000000000000000"
+ProgramHeaders:
+  - Type: PT_LOAD
+    VAddr: 0x1000
+    Sections:
+      - Section: .dynamic
+      - Section: .text
+  - Type: PT_DYNAMIC
+    VAddr: 0x1000
+    Sections:
+      - Section: .text
+
+## Case 3: Both dynamic tables found using SHT_DYNAMIC/PT_DYNAMIC are corrupted.
+
+# RUN: yaml2obj --docnum=3 %s -o %t3.o
+# RUN: llvm-readobj --dynamic-table %t3.o 2>&1 \
+# RUN:   | FileCheck -DFILE=%t3.o --check-prefix=WARNING3 --implicit-check-not="Dynamic" %s
+# RUN: llvm-readelf --dynamic-table %t3.o 2>&1 \
+# RUN:   | FileCheck -DFILE=%t3.o --check-prefix=WARNING3 --implicit-check-not="Dynamic" %s
+
+# WARNING3: warning: '[[FILE]]': invalid section size (1) or entity size (16)
+# WARNING3: warning: '[[FILE]]': SHT_DYNAMIC section header and PT_DYNAMIC disagree about the location of the dynamic table
+# WARNING3: warning: '[[FILE]]': no valid dynamic table was found
+
+--- !ELF
+FileHeader:
+  Class:   ELFCLASS64
+  Data:    ELFDATA2LSB
+  Type:    ET_EXEC
+  Machine: EM_X86_64
+Sections:
+  - Name: .dynamic
+    Type: SHT_DYNAMIC
+    Flags: [SHF_ALLOC]
+    Address: 0x1000
+    AddressAlign: 0x1000
+    Content: "00"
+  - Name: .text
+    Type: SHT_PROGBITS
+    Flags: [SHF_ALLOC]
+    Address: 0x1100
+    AddressAlign: 0x100
+    Content: "00"
+ProgramHeaders:
+  - Type: PT_LOAD
+    VAddr: 0x1000
+    Sections:
+      - Section: .dynamic
+      - Section: .text
+  - Type: PT_DYNAMIC
+    VAddr: 0x1000
+    Sections:
+      - Section: .text

test/tools/llvm-readobj/elf-non-dynamic-in-pt-dynamic.test

 ## Show that llvm-readobj/llvm-readelf tools can dump the .dynamic section which
 ## is not alone in PT_DYNAMIC segment.
 
 ## In the first case .text is placed before .dynamic.
 ## We check that we warn about this case.
 
-# RUN: yaml2obj --docnum=1 %s -o %t.o
-# RUN: llvm-readobj --dynamic-table %t.o 2>&1 \
-# RUN:   | FileCheck %s --DFILE=%t.o --check-prefixes=WARNING,LLVM
-# RUN: llvm-readelf --dynamic-table %t.o 2>&1 \
-# RUN:   | FileCheck %s --DFILE=%t.o --check-prefixes=WARNING,GNU
+# RUN: yaml2obj --docnum=1 %s -o %t1.o
+# RUN: llvm-readobj --dynamic-table %t1.o 2>&1 \
+# RUN:   | FileCheck %s --DFILE=%t1.o --check-prefixes=WARNING,LLVM
+# RUN: llvm-readelf --dynamic-table %t1.o 2>&1 \
+# RUN:   | FileCheck %s --DFILE=%t1.o --check-prefixes=WARNING,GNU
 
-# WARNING:    warning: '[[FILE]]': The SHT_DYNAMIC section '.dynamic' is not at the start of PT_DYNAMIC segment
+# WARNING: warning: '[[FILE]]': The SHT_DYNAMIC section '.dynamic' is not at the start of PT_DYNAMIC segment
+# WARNING: warning: '[[FILE]]': invalid section size (33) or entity size (16)
+# WARNING: warning: '[[FILE]]': SHT_DYNAMIC section header and PT_DYNAMIC disagree about the location of the dynamic table
+# WARNING: warning: '[[FILE]]': PT_DYNAMIC dynamic table is invalid, SHT_DYNAMIC will be used
 
 # LLVM:      DynamicSection [ (2 entries)
 # LLVM-NEXT:   Tag                Type     Name/Value
 # LLVM-NEXT:   0x0000000000000018 BIND_NOW 0x1
 # LLVM-NEXT:   0x0000000000000000 NULL     0x0
 # LLVM-NEXT: ]
 
 # GNU:      Dynamic section at offset 0x{{.*}} contains 2 entries:
- Name: .text
     Type: SHT_PROGBITS
     Flags: [SHF_ALLOC]
     Address: 0x1000
     AddressAlign: 0x100
     Content: "00"
   - Name: .dynamic
     Type: SHT_DYNAMIC
     Flags: [SHF_ALLOC]
-    Address: 0x1100
-    AddressAlign: 0x1000
+    Address: 0x1001
     Entries:
       - Tag:   DT_BIND_NOW
         Value: 0x1
       - Tag:   DT_NULL
         Value: 0x0
 ProgramHeaders:
   - Type: PT_LOAD
     VAddr: 0x1000
     Sections:
       - Section: .text
       - Section: .dynamic
   - Type: PT_DYNAMIC
     VAddr: 0x1000
     Sections:
       - Section: .text
       - Section: .dynamic
 
-## In the second case .text goes after .dynamic and we don't display any warnings.
+## In this case .text goes after .dynamic and we don't display any warnings,
+## though the content of the .text is used for dumping the dynamic table.
+
+# RUN: yaml2obj --docnum=2 %s -o %t2.o
+# RUN: llvm-readobj --dynamic-table %t2.o 2>&1 | FileCheck %s --check-prefix=LLVM2
+# RUN: llvm-readelf --dynamic-table %t2.o 2>&1 | FileCheck %s --check-prefix=GNU2
+
+# LLVM2:      DynamicSection [ (3 entries)
+# LLVM2-NEXT:   Tag                Type     Name/Value
+# LLVM2-NEXT:   0x0000000000000018 BIND_NOW 0x1
+# LLVM2-NEXT:   0x0000000000000018 BIND_NOW 0x2
+# LLVM2-NEXT:   0x0000000000000000 NULL     0x0
+# LLVM2-NEXT: ]
+
+# GNU2:      Dynamic section at offset 0x{{.*}} contains 3 entries:
+# GNU2-NEXT:   Tag                Type       Name/Value
+# GNU2-NEXT:   0x0000000000000018 (BIND_NOW) 0x1
+# GNU2-NEXT:   0x0000000000000018 (BIND_NOW) 0x2
+# GNU2-NEXT:   0x0000000000000000 (NULL)     0x0
+
+--- !ELF
+FileHeader:
+  Class:   ELFCLASS64
+  Data:    ELFDATA2LSB
+  Type:    ET_EXEC
+  Machine: EM_X86_64
+Sections:
+  - Name: .dynamic
+    Type: SHT_DYNAMIC
+    Flags: [SHF_ALLOC]
+    Address: 0x1000
+    AddressAlign: 0x1000
+    Entries:
+      - Tag:   DT_BIND_NOW
+        Value: 0x1
+      - Tag:   DT_BIND_NOW
+        Value: 0x2
+  - Name: .text
+    Type: SHT_PROGBITS
+    Flags: [SHF_ALLOC]
+    Address: 0x1100
+    AddressAlign: 0x100
+    Content: "00000000000000000000000000000000"
+ProgramHeaders:
+  - Type: PT_LOAD
+    VAddr: 0x1000
+    Sections:
+      - Section: .dynamic
+      - Section: .text
+  - Type: PT_DYNAMIC
+    VAddr: 0x1000
+    Sections:
+      - Section: .dynamic
+      - Section: .text
+
+## In this case .text goes after .dynamic, but (PT_DYNAMIC segment size % dynamic entry size != 0)
+## and we have to use the information from the section header instead.
 
-# RUN: yaml2obj --docnum=2 %s -o %t.o
-# RUN: llvm-readobj --dynamic-table %t.o | FileCheck %s --implicit-check-not="warning"
-# RUN: llvm-readelf --dynamic-table %t.o | FileCheck %s --implicit-check-not="warning"
+# RUN: yaml2obj --docnum=3 %s -o %t3.o
+# RUN: llvm-readobj --dynamic-table %t3.o 2>&1 | FileCheck %s --DFILE=%t3.o --check-prefixes=WARNING2,LLVM3
+# RUN: llvm-readelf --dynamic-table %t3.o 2>&1 | FileCheck %s --DFILE=%t3.o --check-prefixes=WARNING2,GNU3
+
+# WARNING2: warning: '[[FILE]]': invalid section size (257) or entity size (16)
+# WARNING2: warning: '[[FILE]]': PT_DYNAMIC dynamic table is invalid, SHT_DYNAMIC will be used
+
+# LLVM3:      DynamicSection [ (2 entries)
+# LLVM3-NEXT:   Tag                Type     Name/Value
+# LLVM3-NEXT:   0x0000000000000018 BIND_NOW 0x1
+# LLVM3-NEXT:   0x0000000000000000 NULL     0x0
+# LLVM3-NEXT: ]
+
+# GNU3:      Dynamic section at offset 0x{{.*}} contains 2 entries:
+# GNU3-NEXT:   Tag                Type       Name/Value
+# GNU3-NEXT:   0x0000000000000018 (BIND_NOW) 0x1
+# GNU3-NEXT:   0x0000000000000000 (NULL)     0x0
 
 --- !ELF
 FileHeader:
   Class:   ELFCLASS64
   Data:    ELFDATA2LSB
   Type:    ET_EXEC
   Machine: EM_X86_64
 Sections:

tools/llvm-readobj/ELFDumper.cpp

return checkDRI({ObjF->getELFFile()->base() + P->p_offset, P->p_filesz,
                      EntSize, ObjF->getFileName()});
   }
 
   DynRegionInfo createDRIFrom(const Elf_Shdr *S) {
     return checkDRI({ObjF->getELFFile()->base() + S->sh_offset, S->sh_size,
                      S->sh_entsize, ObjF->getFileName()});
   }
 
+  std::pair<const Elf_Phdr *, const Elf_Shdr *>
+  findDynamic(const ELFFile<ELFT> *Obj);
   void loadDynamicTable(const ELFFile<ELFT> *Obj);
   void parseDynamicTable();
 
   StringRef getSymbolVersion(StringRef StrTab, const Elf_Sym *symb,
                              bool &IsDefault) const;
   void LoadVersionMap() const;
   void LoadVersionNeeds(const Elf_Shdr *ec) const;
   void LoadVersionDefs(const Elf_Shdr *sec) const;
static const char *getElfMipsOptionsOdkType(unsigned Odk) {
   LLVM_READOBJ_ENUM_CASE(ELF, ODK_IDENT);
   LLVM_READOBJ_ENUM_CASE(ELF, ODK_PAGESIZE);
   default:
     return "Unknown";
   }
 }
 
 template <typename ELFT>
-void ELFDumper<ELFT>::loadDynamicTable(const ELFFile<ELFT> *Obj) {
+std::pair<const typename ELFT::Phdr *, const typename ELFT::Shdr *>
+ELFDumper<ELFT>::findDynamic(const ELFFile<ELFT> *Obj) {
   // Try to locate the PT_DYNAMIC header.
   const Elf_Phdr *DynamicPhdr = nullptr;
   for (const Elf_Phdr &Phdr :
        unwrapOrError(ObjF->getFileName(), Obj->program_headers())) {
     if (Phdr.p_type != ELF::PT_DYNAMIC)
       continue;
     DynamicPhdr = &Phdr;
     break;
   }
 
   // Try to locate the .dynamic section in the sections header table.
   const Elf_Shdr *DynamicSec = nullptr;
   for (const Elf_Shdr &Sec :
        unwrapOrError(ObjF->getFileName(), Obj->sections())) {
     if (Sec.sh_type != ELF::SHT_DYNAMIC)
       continue;
     DynamicSec = &Sec;
     break;
   }
 
-  // Information in the section header has priority over the information
-  // in a PT_DYNAMIC header.
-  // Ignore sh_entsize and use the expected value for entry size explicitly.
-  // This allows us to dump the dynamic sections with a broken sh_entsize
-  // field.
-  if (DynamicSec) {
-    DynamicTable =
-        checkDRI({ObjF->getELFFile()->base() + DynamicSec->sh_offset,
-                  DynamicSec->sh_size, sizeof(Elf_Dyn), ObjF->getFileName()});
-    parseDynamicTable();
-  }
-
-  // If we have a PT_DYNAMIC header, we will either check the found dynamic
-  // section or take the dynamic table data directly from the header.
-  if (!DynamicPhdr)
-    return;
-
-  if (DynamicPhdr->p_offset + DynamicPhdr->p_filesz >
+  if (DynamicPhdr && DynamicPhdr->p_offset + DynamicPhdr->p_filesz >
                          ObjF->getMemoryBufferRef().getBufferSize()) {
     reportWarning(
         createError(
             "PT_DYNAMIC segment offset + size exceeds the size of the file"),
         ObjF->getFileName());
-    return;
-  }
-
-  if (!DynamicSec) {
-    DynamicTable = createDRIFrom(DynamicPhdr, sizeof(Elf_Dyn));
-    parseDynamicTable();
-    return;
+    // Don't use the broken dynamic header.
+    DynamicPhdr = nullptr;
   }
 
+  if (DynamicPhdr && DynamicSec) {
     StringRef Name =
         unwrapOrError(ObjF->getFileName(), Obj->getSectionName(DynamicSec));
     if (DynamicSec->sh_addr + DynamicSec->sh_size >
             DynamicPhdr->p_vaddr + DynamicPhdr->p_memsz ||
         DynamicSec->sh_addr < DynamicPhdr->p_vaddr)
       reportWarning(createError("The SHT_DYNAMIC section '" + Name +
                                 "' is not contained within the "
                                 "PT_DYNAMIC segment"),
                     ObjF->getFileName());
 
     if (DynamicSec->sh_addr != DynamicPhdr->p_vaddr)
       reportWarning(createError("The SHT_DYNAMIC section '" + Name +
                                 "' is not at the start of "
                                 "PT_DYNAMIC segment"),
                     ObjF->getFileName());
   }
 
+  return std::make_pair(DynamicPhdr, DynamicSec);
+}
+
+template <typename ELFT>
+void ELFDumper<ELFT>::loadDynamicTable(const ELFFile<ELFT> *Obj) {
+  const Elf_Phdr *DynamicPhdr;
+  const Elf_Shdr *DynamicSec;
+  std::tie(DynamicPhdr, DynamicSec) = findDynamic(Obj);
+  if (!DynamicPhdr && !DynamicSec)
+    return;
+
+  DynRegionInfo FromPhdr(ObjF->getFileName());
+  bool IsPhdrTableValid = false;
+  if (DynamicPhdr) {
+    FromPhdr = createDRIFrom(DynamicPhdr, sizeof(Elf_Dyn));
+    IsPhdrTableValid = !FromPhdr.getAsArrayRef<Elf_Dyn>().empty();
+  }
+
+  // Locate the dynamic table described in a section header.
+  // Ignore sh_entsize and use the expected value for entry size explicitly.
+  // This allows us to dump the dynamic sections with a broken sh_entsize
+  // field.
+  DynRegionInfo FromSec(ObjF->getFileName());
+  bool IsSecTableValid = false;
+  if (DynamicSec) {
+    FromSec =
+        checkDRI({ObjF->getELFFile()->base() + DynamicSec->sh_offset,
+                  DynamicSec->sh_size, sizeof(Elf_Dyn), ObjF->getFileName()});
+    IsSecTableValid = !FromSec.getAsArrayRef<Elf_Dyn>().empty();
+  }
+
+  // When we only have an information from section header table or from the
+  // PT_DYNAMIC header, just use it.
+  if (!DynamicPhdr || !DynamicSec) {
+    if ((DynamicPhdr && IsPhdrTableValid) || (DynamicSec && IsSecTableValid)) {
+      DynamicTable = DynamicPhdr ? FromPhdr : FromSec;
+      parseDynamicTable();
+    } else {
+      reportWarning(createError("no valid dynamic table was found"),
+                    ObjF->getFileName());
+    }
+    return;
+  }
+
+  // At this point we have tables found from the section header and from the
+  // dynamic segment. Usually they match, but we have to do sanity checks to
+  // verify that.
+
+  if (FromPhdr.Addr != FromSec.Addr)
+    reportWarning(
+        createError("SHT_DYNAMIC section header and PT_DYNAMIC disagree about "
+                    "the location of the dynamic table"),
+        ObjF->getFileName());
+
+  if (!IsPhdrTableValid && !IsSecTableValid) {
+    reportWarning(createError("no valid dynamic table was found"),
+                  ObjF->getFileName());
+    return;
+  }
+
+  // Information in the PT_DYNAMIC header has priority over the information
+  // in a section header.
+  if (IsPhdrTableValid) {
+    if (!IsSecTableValid)
+      reportWarning(
+          createError(
+              "SHT_DYNAMIC dynamic table is invalid, PT_DYNAMIC will be used"),
+          ObjF->getFileName());
+    DynamicTable = FromPhdr;
+
+  } else {
+    reportWarning(
+        createError(
+            "PT_DYNAMIC dynamic table is invalid, SHT_DYNAMIC will be used"),
+        ObjF->getFileName());
+    DynamicTable = FromSec;
+  }
+
+  parseDynamicTable();
+  return;
+}
+
 template <typename ELFT>
 ELFDumper<ELFT>::ELFDumper(const object::ELFObjectFile<ELFT> *ObjF,
                            ScopedPrinter &Writer)
     : ObjDumper(Writer), ObjF(ObjF), DynRelRegion(ObjF->getFileName()),
       DynRelaRegion(ObjF->getFileName()), DynRelrRegion(ObjF->getFileName()),
       DynPLTRelRegion(ObjF->getFileName()), DynSymRegion(ObjF->getFileName()),
       DynamicTable(ObjF->getFileName()) {
   const ELFFile<ELFT> *Obj = ObjF->getELFFile();
   for (const Elf_Shdr &Sec :
        unwrapOrError(ObjF->getFileName(), Obj->sections())) {
     switch (Sec.sh_type) {
     case ELF::SHT_SYMTAB:
       if (!DotSymtabSec)
         DotSymtabSec = &Sec;
       break;
     case ELF::SHT_DYNSYM:
       if (!DynSymRegion.Size) {
         DynSymRegion = createDRIFrom(&Sec);
         // This is only used (if Elf_Shdr present)for naming section in GNU