[X86][Costmodel] Load/store i16 Stride=6 VF=16 interleaving costs

[lebedev.ri]

Summary

The only sched models that for cpu's that support avx2
but not avx512 are: haswell, broadwell, skylake, zen1-3

For this tuple, measuring becomes problematic since there's a lot of spilling going on,
but apparently all these memory ops do not affect worst-case estimate at all here.

For load we have:
https://godbolt.org/z/5qGb9odP6 - for intels Block RThroughput: <=106.0; for ryzens, Block RThroughput: <=34.8
So pick cost of 106.

For store we have:
https://godbolt.org/z/KrWcv4Ph7 - for intels Block RThroughput: =58.0; for ryzens, Block RThroughput: <=20.5
So pick cost of 58.

I'm directly using the shuffling asm the llc produced,
without any manual fixups that may be needed
to ensure sequential execution.

[RKSimon]

LGTM

[lebedev.ri]

In D110593#3027648, @RKSimon wrote:

LGTM

@RKSimon thank you for the speedy reviews!

[RKSimon]

In D110593#3027699, @lebedev.ri wrote:

In D110593#3027648, @RKSimon wrote:

LGTM

@RKSimon thank you for the speedy reviews!

Once these are in I have a WIP patch to add SSE2/AVX1/AVX512BW test coverage (with their terrible costs)

[lebedev.ri]

@RKSimon this is pretty embarrassing, but looks like i have uploaded the patch for VF=8 here.
The analysis / patch description is indeed for VF=16, but the diff isn't.
I'm going to guess this is fine, but i'll try to be more careful.
Sorry!

llvm/lib/Target/X86/X86TargetTransformInfo.cpp

static const CostTblEntry AVX2InterleavedLoadTbl[] = {
       {4, MVT::v2i16, 6}, // (load 8i16 and) deinterleave into 4 x 2i16
       {4, MVT::v4i16, 17}, // (load 16i16 and) deinterleave into 4 x 4i16
       {4, MVT::v8i16, 33}, // (load 32i16 and) deinterleave into 4 x 8i16
       {4, MVT::v16i16, 75}, // (load 64i16 and) deinterleave into 4 x 16i16
       {4, MVT::v32i16, 150}, // (load 128i16 and) deinterleave into 4 x 32i16
 
       {6, MVT::v2i16, 13}, // (load 12i16 and) deinterleave into 6 x 2i16
       {6, MVT::v4i16, 9}, // (load 24i16 and) deinterleave into 6 x 4i16
+      {6, MVT::v8i16, 39}, // (load 48i16 and) deinterleave into 6 x 8i16
 
       {8, MVT::v8i32, 40} // (load 64i32 and) deinterleave into 8 x 8i32
   };
 
   static const CostTblEntry AVX2InterleavedStoreTbl[] = {
       {2, MVT::v2i16, 1}, // interleave 2 x 2i16 into 4i16 (and store)
       {2, MVT::v4i16, 1}, // interleave 2 x 4i16 into 8i16 (and store)
       {2, MVT::v8i16, 3}, // interleave 2 x 8i16 into 16i16 (and store)
static const CostTblEntry AVX2InterleavedStoreTbl[] = {
       {4, MVT::v2i16, 2},  // interleave 4 x 2i16 into 8i16 (and store)
       {4, MVT::v4i16, 6},  // interleave 4 x 4i16 into 16i16 (and store)
       {4, MVT::v8i16, 10},  // interleave 4 x 8i16 into 32i16 (and store)
       {4, MVT::v16i16, 32},  // interleave 4 x 16i16 into 64i16 (and store)
       {4, MVT::v32i16, 64},  // interleave 4 x 32i16 into 128i16 (and store)
 
       {6, MVT::v2i16, 10},  // interleave 6 x 2i16 into 12i16 (and store)
       {6, MVT::v4i16, 15},  // interleave 6 x 4i16 into 24i16 (and store)
+      {6, MVT::v8i16, 21},  // interleave 6 x 8i16 into 48i16 (and store)
   };
 
   if (Opcode == Instruction::Load) {
     if (const auto *Entry =
             CostTableLookup(AVX2InterleavedLoadTbl, Factor, ETy.getSimpleVT()))
       return MemOpCosts + Entry->Cost;
   } else {
     assert(Opcode == Instruction::Store &&

llvm/test/Analysis/CostModel/X86/interleaved-load-i16-stride-6.ll

 ; RUN: opt -loop-vectorize -vectorizer-maximize-bandwidth -S -mattr=+avx2 --debug-only=loop-vectorize < %s 2>&1 | FileCheck %s
 ; REQUIRES: asserts
 
 target datalayout = "e-m:e-i64:64-f80:128-n8:16:32:64-S128"
 target triple = "x86_64-unknown-linux-gnu"
 
 @A = global [1024 x i16] zeroinitializer, align 128
 @B = global [1024 x i8] zeroinitializer, align 128
 
 ; CHECK: LV: Checking a loop in "test"
 ; CHECK: LV: Found an estimated cost of 1 for VF 1 For instruction:   %v0 = load i16, i16* %in0, align 2
 ; CHECK: LV: Found an estimated cost of 16 for VF 2 For instruction:   %v0 = load i16, i16* %in0, align 2
 ; CHECK: LV: Found an estimated cost of 11 for VF 4 For instruction:   %v0 = load i16, i16* %in0, align 2
-; CHECK: LV: Found an estimated cost of 123 for VF 8 For instruction:   %v0 = load i16, i16* %in0, align 2
+; CHECK: LV: Found an estimated cost of 42 for VF 8 For instruction:   %v0 = load i16, i16* %in0, align 2
 ; CHECK: LV: Found an estimated cost of 342 for VF 16 For instruction:   %v0 = load i16, i16* %in0, align 2
 ; CHECK-NOT: LV: Found an estimated cost of {{[0-9]+}} for VF {{[0-9]+}} For instruction:   %v0 = load i16, i16* %in0, align 2
 
 define void @test() {
 entry:
   br label %for.body
 
 for.body:

llvm/test/Analysis/CostModel/X86/interleaved-store-i16-stride-6.ll

 ; RUN: opt -loop-vectorize -vectorizer-maximize-bandwidth -S -mattr=+avx2 --debug-only=loop-vectorize < %s 2>&1 | FileCheck %s
 ; REQUIRES: asserts
 
 target datalayout = "e-m:e-i64:64-f80:128-n8:16:32:64-S128"
 target triple = "x86_64-unknown-linux-gnu"
 
 @A = global [1024 x i8] zeroinitializer, align 128
 @B = global [1024 x i16] zeroinitializer, align 128
 
 ; CHECK: LV: Checking a loop in "test"
 ; CHECK: LV: Found an estimated cost of 1 for VF 1 For instruction:   store i16 %v5, i16* %out5, align 2
 ; CHECK: LV: Found an estimated cost of 13 for VF 2 For instruction:   store i16 %v5, i16* %out5, align 2
 ; CHECK: LV: Found an estimated cost of 17 for VF 4 For instruction:   store i16 %v5, i16* %out5, align 2
-; CHECK: LV: Found an estimated cost of 147 for VF 8 For instruction:   store i16 %v5, i16* %out5, align 2
+; CHECK: LV: Found an estimated cost of 24 for VF 8 For instruction:   store i16 %v5, i16* %out5, align 2
 ; CHECK: LV: Found an estimated cost of 342 for VF 16 For instruction:   store i16 %v5, i16* %out5, align 2
 ; CHECK-NOT: LV: Found an estimated cost of {{[0-9]+}} for VF {{[0-9]+}} For instruction:   store i16 %v5, i16* %out5, align 2
 
 define void @test() {
 entry:
   br label %for.body
 
 for.body: