[GlobalISel] CSEMIRBuilder: Add support for G_GEP

llvm/lib/CodeGen/GlobalISel/CSEInfo.cpp

bool CSEConfigFull::shouldCSEOpc(unsigned Opc) {
   case TargetOpcode::G_SREM:
   case TargetOpcode::G_CONSTANT:
   case TargetOpcode::G_FCONSTANT:
   case TargetOpcode::G_ZEXT:
   case TargetOpcode::G_SEXT:
   case TargetOpcode::G_ANYEXT:
   case TargetOpcode::G_UNMERGE_VALUES:
   case TargetOpcode::G_TRUNC:
+  case TargetOpcode::G_GEP:
     return true;
   }
   return false;
 }
 
 bool CSEConfigConstantOnly::shouldCSEOpc(unsigned Opc) {
   return Opc == TargetOpcode::G_CONSTANT;
 }

llvm/lib/CodeGen/GlobalISel/IRTranslator.cpp

if (StructType *StTy = GTI.getStructTypeOrNull()) {
       // If this is a scalar constant or a splat vector of constants,
       // handle it quickly.
       if (const auto *CI = dyn_cast<ConstantInt>(Idx)) {
         Offset += ElementSize * CI->getSExtValue();
         continue;
       }
 
       if (Offset != 0) {
-        Register NewBaseReg = MRI->createGenericVirtualRegister(PtrTy);
         LLT OffsetTy = getLLTForType(*OffsetIRTy, *DL);
         auto OffsetMIB = MIRBuilder.buildConstant({OffsetTy}, Offset);
-        MIRBuilder.buildGEP(NewBaseReg, BaseReg, OffsetMIB.getReg(0));
-
-        BaseReg = NewBaseReg;
+        BaseReg =
+            MIRBuilder.buildGEP(PtrTy, BaseReg, OffsetMIB.getReg(0)).getReg(0);
         Offset = 0;
       }
 
       Register IdxReg = getOrCreateVReg(*Idx);
-      if (MRI->getType(IdxReg) != OffsetTy) {
-        Register NewIdxReg = MRI->createGenericVirtualRegister(OffsetTy);
-        MIRBuilder.buildSExtOrTrunc(NewIdxReg, IdxReg);
-        IdxReg = NewIdxReg;
-      }
+      if (MRI->getType(IdxReg) != OffsetTy)
+        IdxReg = MIRBuilder.buildSExtOrTrunc(OffsetTy, IdxReg).getReg(0);
 
       // N = N + Idx * ElementSize;
       // Avoid doing it for ElementSize of 1.
       Register GepOffsetReg;
       if (ElementSize != 1) {
-        GepOffsetReg = MRI->createGenericVirtualRegister(OffsetTy);
         auto ElementSizeMIB = MIRBuilder.buildConstant(
             getLLTForType(*OffsetIRTy, *DL), ElementSize);
-        MIRBuilder.buildMul(GepOffsetReg, ElementSizeMIB.getReg(0), IdxReg);
+        GepOffsetReg =
+            MIRBuilder.buildMul(OffsetTy, ElementSizeMIB, IdxReg).getReg(0);
       } else
         GepOffsetReg = IdxReg;
 
-      Register NewBaseReg = MRI->createGenericVirtualRegister(PtrTy);
-      MIRBuilder.buildGEP(NewBaseReg, BaseReg, GepOffsetReg);
-      BaseReg = NewBaseReg;
+      BaseReg = MIRBuilder.buildGEP(PtrTy, BaseReg, GepOffsetReg).getReg(0);
     }
   }
 
   if (Offset != 0) {
     auto OffsetMIB =
         MIRBuilder.buildConstant(getLLTForType(*OffsetIRTy, *DL), Offset);
     MIRBuilder.buildGEP(getOrCreateVReg(U), BaseReg, OffsetMIB.getReg(0));
     return true;

llvm/lib/CodeGen/GlobalISel/MachineIRBuilder.cpp

 
 MachineInstrBuilder MachineIRBuilder::buildGEP(const DstOp &Res,
                                                const SrcOp &Op0,
                                                const SrcOp &Op1) {
   assert(Res.getLLTTy(*getMRI()).isPointer() &&
          Res.getLLTTy(*getMRI()) == Op0.getLLTTy(*getMRI()) && "type mismatch");
   assert(Op1.getLLTTy(*getMRI()).isScalar() && "invalid offset type");
 
-  auto MIB = buildInstr(TargetOpcode::G_GEP);
-  Res.addDefToMIB(*getMRI(), MIB);
-  Op0.addSrcToMIB(MIB);
-  Op1.addSrcToMIB(MIB);
-  return MIB;
+  return buildInstr(TargetOpcode::G_GEP, {Res}, {Op0, Op1});
 }
 
 Optional<MachineInstrBuilder>
 MachineIRBuilder::materializeGEP(Register &Res, Register Op0,
                                  const LLT &ValueTy, uint64_t Value) {
   assert(Res == 0 && "Res is a result argument");
   assert(ValueTy.isScalar()  && "invalid offset type");
 

llvm/test/CodeGen/AArch64/GlobalISel/arm64-irtranslator-gep.ll

+; NOTE: Assertions have been autogenerated by utils/update_mir_test_checks.py
+; RUN: llc -O0 -stop-after=irtranslator -global-isel -verify-machineinstrs %s -o - 2>&1 | FileCheck %s --check-prefix=O0
+; RUN: llc -O3 -stop-after=irtranslator -global-isel -verify-machineinstrs %s -o - 2>&1 | FileCheck %s --check-prefix=O3
+target datalayout = "e-m:o-i64:64-i128:128-n32:64-S128"
+target triple = "aarch64--"
+
+define i32 @cse_gep([4 x i32]* %ptr, i32 %idx) {
+  ; O0-LABEL: name: cse_gep
+  ; O0: bb.1 (%ir-block.0):
+  ; O0:   liveins: $w1, $x0
+  ; O0:   [[COPY:%[0-9]+]]:_(p0) = COPY $x0
+  ; O0:   [[COPY1:%[0-9]+]]:_(s32) = COPY $w1
+  ; O0:   [[SEXT:%[0-9]+]]:_(s64) = G_SEXT [[COPY1]](s32)
+  ; O0:   [[C:%[0-9]+]]:_(s64) = G_CONSTANT i64 16
+  ; O0:   [[MUL:%[0-9]+]]:_(s64) = G_MUL [[C]], [[SEXT]]
+  ; O0:   [[GEP:%[0-9]+]]:_(p0) = G_GEP [[COPY]], [[MUL]](s64)
+  ; O0:   [[COPY2:%[0-9]+]]:_(p0) = COPY [[GEP]](p0)
+  ; O0:   [[LOAD:%[0-9]+]]:_(s32) = G_LOAD [[COPY2]](p0) :: (load 4 from %ir.gep1)
+  ; O0:   [[MUL1:%[0-9]+]]:_(s64) = G_MUL [[C]], [[SEXT]]
+  ; O0:   [[GEP1:%[0-9]+]]:_(p0) = G_GEP [[COPY]], [[MUL1]](s64)
+  ; O0:   [[C1:%[0-9]+]]:_(s64) = G_CONSTANT i64 4
+  ; O0:   [[GEP2:%[0-9]+]]:_(p0) = G_GEP [[GEP1]], [[C1]](s64)
+  ; O0:   [[LOAD1:%[0-9]+]]:_(s32) = G_LOAD [[GEP2]](p0) :: (load 4 from %ir.gep2)
+  ; O0:   [[ADD:%[0-9]+]]:_(s32) = G_ADD [[LOAD1]], [[LOAD1]]
+  ; O0:   $w0 = COPY [[ADD]](s32)
+  ; O0:   RET_ReallyLR implicit $w0
+  ; O3-LABEL: name: cse_gep
+  ; O3: bb.1 (%ir-block.0):
+  ; O3:   liveins: $w1, $x0
+  ; O3:   [[COPY:%[0-9]+]]:_(p0) = COPY $x0
+  ; O3:   [[COPY1:%[0-9]+]]:_(s32) = COPY $w1
+  ; O3:   [[SEXT:%[0-9]+]]:_(s64) = G_SEXT [[COPY1]](s32)
+  ; O3:   [[C:%[0-9]+]]:_(s64) = G_CONSTANT i64 16
+  ; O3:   [[MUL:%[0-9]+]]:_(s64) = G_MUL [[C]], [[SEXT]]
+  ; O3:   [[GEP:%[0-9]+]]:_(p0) = G_GEP [[COPY]], [[MUL]](s64)
+  ; O3:   [[COPY2:%[0-9]+]]:_(p0) = COPY [[GEP]](p0)
+  ; O3:   [[LOAD:%[0-9]+]]:_(s32) = G_LOAD [[COPY2]](p0) :: (load 4 from %ir.gep1)
+  ; O3:   [[C1:%[0-9]+]]:_(s64) = G_CONSTANT i64 4
+  ; O3:   [[GEP1:%[0-9]+]]:_(p0) = G_GEP [[GEP]], [[C1]](s64)
+  ; O3:   [[LOAD1:%[0-9]+]]:_(s32) = G_LOAD [[GEP1]](p0) :: (load 4 from %ir.gep2)
+  ; O3:   [[ADD:%[0-9]+]]:_(s32) = G_ADD [[LOAD1]], [[LOAD1]]
+  ; O3:   $w0 = COPY [[ADD]](s32)
+  ; O3:   RET_ReallyLR implicit $w0
+  %sidx = sext i32 %idx to i64
+  %gep1 = getelementptr inbounds [4 x i32], [4 x i32]* %ptr, i64 %sidx, i64 0
+  %v1 = load i32, i32* %gep1
+  %gep2 = getelementptr inbounds [4 x i32], [4 x i32]* %ptr, i64 %sidx, i64 1
+  %v2 = load i32, i32* %gep2
+  %res = add i32 %v2, %v2
+  ret i32 %res
+}

llvm/test/CodeGen/ARM/GlobalISel/arm-irtranslator.ll

 ; when breaking up loads and stores of aggregates.
 ; CHECK-LABEL: name: test_load_store_struct
 ; CHECK: [[ADDR1:%[0-9]+]]:_(p0) = COPY $r0
 ; CHECK-DAG: [[VAL1:%[0-9]+]]:_(s32) = G_LOAD [[ADDR1]](p0) :: (load 4 from %ir.addr)
 ; CHECK-DAG: [[OFFSET:%[0-9]+]]:_(s32) = G_CONSTANT i32 4
 ; CHECK-DAG: [[ADDR2:%[0-9]+]]:_(p0) = G_GEP [[ADDR1]], [[OFFSET]](s32)
 ; CHECK-DAG: [[VAL2:%[0-9]+]]:_(s32) = G_LOAD [[ADDR2]](p0) :: (load 4 from %ir.addr + 4)
 ; CHECK-DAG: G_STORE [[VAL1]](s32), [[ADDR1]](p0) :: (store 4 into %ir.addr)
-; CHECK-DAG: [[ADDR2:%[0-9]+]]:_(p0) = G_GEP [[ADDR1]], [[OFFSET]](s32)
-; CHECK-DAG: G_STORE [[VAL2]](s32), [[ADDR2]](p0) :: (store 4 into %ir.addr + 4)
+; CHECK-DAG: [[ADDR3:%[0-9]+]]:_(p0) = COPY [[ADDR2]]
+; CHECK-DAG: G_STORE [[VAL2]](s32), [[ADDR3]](p0) :: (store 4 into %ir.addr + 4)
   %val = load {i32, i32}, {i32, i32} *%addr, align 4
   store {i32, i32} %val, {i32, i32} *%addr, align 4
   ret void
 }

llvm/test/CodeGen/ARM/GlobalISel/arm-legalize-load-store.mir

bb.0:
     liveins: $r0
 
     ; Can't use the VFP support for unaligned operations, we need to use 32-bits
     ; operations instead.
     ; CHECK: [[ADDR1:%[0-9]+]]:_(p0) = COPY $r0
     ; CHECK-NEXT: [[V1:%[0-9]+]]:_(s32) = G_LOAD [[ADDR1]](p0) :: (load 4, align 1)
     ; CHECK-NEXT: [[OFF:%[0-9]+]]:_(s32) = G_CONSTANT i32 4
     ; CHECK-NEXT: [[ADDR2:%[0-9]+]]:_(p0) = G_GEP [[ADDR1]], [[OFF]]
-    ; CHECK-NEXT: [[V2:%[0-9]+]]:_(s32) = G_LOAD [[ADDR2]](p0) :: (load 4, align 1)
+    ; CHECK-NEXT: [[COPY:%[0-9]+]]:_(p0) = COPY [[ADDR2]]
+    ; CHECK-NEXT: [[V2:%[0-9]+]]:_(s32) = G_LOAD [[COPY]](p0) :: (load 4, align 1)
     ; CHECK-NEXT: G_STORE [[V1]](s32), [[ADDR1]](p0) :: (store 4, align 1)
-    ; CHECK-NEXT: [[ADDR2:%[0-9]+]]:_(p0) = G_GEP [[ADDR1]], [[OFF]]
     ; CHECK-NEXT: G_STORE [[V2]](s32), [[ADDR2]](p0) :: (store 4, align 1)
     %0(p0) = COPY $r0
     %1(s64) = G_LOAD %0(p0) :: (load 8, align 1)
     G_STORE %1(s64), %0(p0) :: (store 8, align 1)
 
     ; For word-aligned we can use VFP operations.
     ; CHECK: [[V:%[0-9]+]]:_(s64) = G_LOAD %0(p0) :: (load 8, align 4)
     ; CHECK: G_STORE [[V]](s64), %0(p0) :: (store 8, align 4)
body:             |
   bb.0:
     liveins: $r0
 
     ; When we don't have VFP support, we need to use 32-bit operations.
     ; CHECK: [[ADDR1:%[0-9]+]]:_(p0) = COPY $r0
     ; CHECK-NEXT: [[V1:%[0-9]+]]:_(s32) = G_LOAD [[ADDR1]](p0) :: (load 4, align 1)
     ; CHECK-NEXT: [[OFF:%[0-9]+]]:_(s32) = G_CONSTANT i32 4
     ; CHECK-NEXT: [[ADDR2:%[0-9]+]]:_(p0) = G_GEP [[ADDR1]], [[OFF]]
-    ; CHECK-NEXT: [[V2:%[0-9]+]]:_(s32) = G_LOAD [[ADDR2]](p0) :: (load 4, align 1)
+    ; CHECK-NEXT: [[COPY:%[0-9]+]]:_(p0) = COPY [[ADDR2]]
+    ; CHECK-NEXT: [[V2:%[0-9]+]]:_(s32) = G_LOAD [[COPY]](p0) :: (load 4, align 1)
     ; CHECK-NEXT: G_STORE [[V1]](s32), [[ADDR1]](p0) :: (store 4, align 1)
-    ; CHECK-NEXT: [[ADDR2:%[0-9]+]]:_(p0) = G_GEP [[ADDR1]], [[OFF]]
-    ; CHECK-NEXT: G_STORE [[V2]](s32), [[ADDR2]](p0) :: (store 4, align 1)
+    ; CHECK-NEXT: [[COPY2:%[0-9]+]]:_(p0) = COPY [[ADDR2]]
+    ; CHECK-NEXT: G_STORE [[V2]](s32), [[COPY2]](p0) :: (store 4, align 1)
     %0(p0) = COPY $r0
     %1(s64) = G_LOAD %0(p0) :: (load 8, align 1)
     G_STORE %1(s64), %0(p0) :: (store 8, align 1)
 
     ; CHECK: [[V1:%[0-9]+]]:_(s32) = G_LOAD [[ADDR1]](p0) :: (load 4)
-    ; CHECK-NEXT: [[ADDR2:%[0-9]+]]:_(p0) = G_GEP [[ADDR1]], [[OFF]]
-    ; CHECK-NEXT: [[V2:%[0-9]+]]:_(s32) = G_LOAD [[ADDR2]](p0) :: (load 4)
+    ; CHECK-NEXT: [[COPY3:%[0-9]+]]:_(p0) = COPY [[ADDR2]]
+    ; CHECK-NEXT: [[V2:%[0-9]+]]:_(s32) = G_LOAD [[COPY3]](p0) :: (load 4)
     ; CHECK-NEXT: G_STORE [[V1]](s32), [[ADDR1]](p0) :: (store 4)
-    ; CHECK-NEXT: [[ADDR2:%[0-9]+]]:_(p0) = G_GEP [[ADDR1]], [[OFF]]
     ; CHECK-NEXT: G_STORE [[V2]](s32), [[ADDR2]](p0) :: (store 4)
     %2(s64) = G_LOAD %0(p0) :: (load 8, align 4)
     G_STORE %2(s64), %0(p0) :: (store 8, align 4)
 
     BX_RET 14, $noreg
 ...
 ---
 name:            test_gep_s32