Recognize pattern for ctpop in instcombine

[kparzysz]

Summary

Recognize the pattern for population count in the instruction combiner and replace it with a call to the corresponding intrinsic.
The pattern is based on that in "Hacker's Delight".

[kparzysz]

Removed all the unnecessary (or unwanted) options from the function attributes in the unit tests.

[majnemer]

Unless I am mistaken, the ctpop and ctlz pieces of this code are independent of one another. Please split the patch into two patches, one for each transform.

lib/Transforms/InstCombine/InstCombineAddSub.cpp

1181–1183

Seeing as how this is a rather rare occurrence for adds, can you sort this to the bottom? The Simplify... naming convention implies that no new instruction needs to be created which is not the case for this transform. I'd call it optimizeCtpopIdiom or something similar.

test/Transforms/InstCombine/ctpop-match.ll

57

Please CHECK a little more thoroughly, it would be nice to see the call to ctpop consume the argument, etc.

95–97

This test case doesn't look reduced.

[kparzysz]

They are not completely independent. The pattern for ctlz relies on having the call to Intrinsic::ctpop already in the code.

[kparzysz]

Addresses all the comments except for splitting the patch into two. The ctpop part does not depend on ctlz, but ctlz utilizes ctpop.

[kparzysz]

Marked comments as "done".

[kparzysz]

Restored a blank line accidentally deleted from visitSub.

[kparzysz]

Are you ok with keeping both parts together, or would you still prefer to have them separated?

[kparzysz]

Ping.

[kparzysz]

Ping.

[RKSimon]

From previous comments it looks like this patch should just contain the ctpop patterns and a followup patch adds the ctlz work.

An additional followup could be to recognise the pattern cttz(x) = ctpop((x & -x)- 1)

Additionally, is there any chance that this could be tweaked to detect the same ctpop / lzcnt patterns for vector types as well?

[kparzysz]

Yes, and I asked if it's still ok for these two parts to go together. I can split it if there is a strong preference for that.

I haven't thought about the vector versions and I haven't seen any code that does this for vectors, so I'm not sure what patterns to look for. I don't know if the pattern for scalars would also apply to vectors.

I can add cttz.

[kparzysz]

Hello?

[hfinkel]

lib/Transforms/InstCombine/InstCombineAddSub.cpp

1060

I think it would be better if the comment above matchCtpopW explained what matchCtpopW does, and a comment above optimizeToCtpop explained what optimizeToCtpop does. The:

// ... If BW is less than the bit-width of the type of V, then
// BI == ctpop(V) if the bits of V beyond BW are zero.

is a bit confusing here because it is describing behavior implemented in a different function.

1158

Instead of checking for known zero bits, why not transform this into a ctpop(v & mask)? If the upper bits are known to be zero, then the mask will go away in the next instcombine iteration regardless.

[majnemer]

Does the rest of the optimization pipeline benefit from this canonicalization? If not, I would recommend moving this to CGP.

[kparzysz]

To answer David's question: the main reason why it's here is that after the instruction combiner, the code is transformed in a way that makes the detection of the popcnt pattern more difficult. At this stage, there is some regularity in the IR that can be exploited to check for popcnt patterns of varying widths.
As far as downstream optimizations are involved---this transformation will reduce code size by quite a bit, and any optimization that can be limited by code size could potentially be enabled by this change.

[kparzysz]

lib/Transforms/InstCombine/InstCombineAddSub.cpp

1158

Because then the pattern is not really computing the population count. The instructions in the pattern operate on the whole value, including the high bits, and these bits contribute to the final result.

[kparzysz]

Updated comments to reflect Hal's remarks.

[kparzysz]

Ping.

[kparzysz]

Ping.

[majnemer]

In D15718#342877, @kparzysz wrote:

To answer David's question: the main reason why it's here is that after the instruction combiner, the code is transformed in a way that makes the detection of the popcnt pattern more difficult. At this stage, there is some regularity in the IR that can be exploited to check for popcnt patterns of varying widths.
As far as downstream optimizations are involved---this transformation will reduce code size by quite a bit, and any optimization that can be limited by code size could potentially be enabled by this change.

I am concerned that you will slow down InstCombine by a considerable margin by checking for PopCnt. Most of the time, the work done to perform this optimization will not be fruitful.

We've recently been through a similar odyssey for bswap/bitreverse (see r257875). We managed to move that logic to CGP without too much drama.

[kparzysz]

Will implement this in another location (most likely CodeGenPrepare).

lib/Transforms/InstCombine/InstCombineAddSub.cpp

if (match(LHS, m_Xor(m_Value(Y), m_APInt(C1))))
     if (C1->countTrailingZeros() == 0)
       if (match(Y, m_And(m_Value(Z), m_APInt(C2))) && *C1 == (*C2 + 1)) {
         Value *NewOr = Builder->CreateOr(Z, ~(*C2));
         return Builder->CreateSub(RHS, NewOr, "sub");
       }
   return nullptr;
 }
 
+// Check if BI matches a ctpop calculation pattern for a value of width BW
+// bits. If so, return the argument V such that ctpop(V) would be a candidate
+// for replacing BI. If BW is less than the bit-width of the type of V, then
+// BI == ctpop(V) if the bits of V beyond BW are zero.
+// The matched pattern is:
+//   x0 := (V & 0x55..5) + ((V>>1) & 0x55..5)
+//   x1 := (x0 & 0x33..3) + ((x0>>2) & 0x33..3)
+//   ...
+//   xn := (xn-1 & 0x00..0FF..F) + ((xn-1>>S/2) & 0x00..0FF..F)
+// where xn is the candidate for ctpop(V).
+static Value *matchCtpopW(BinaryOperator *BI, unsigned BW) {
+  auto matchStep = [] (Value *V, unsigned S, APInt M, bool ShiftAlone)
+        -> Value* {
+    Value *Op0 = nullptr, *Op1 = nullptr;
+    if (!match(V, m_Add(m_Value(Op0), m_Value(Op1))))
+      return nullptr;
+
+    auto matchAndShift = [S,M,ShiftAlone] (Value *V0, Value *V1) -> Value* {
+      Value *V = nullptr;
+      const APInt *P = &M;
+      auto Mask = m_APInt(P);
+      auto Shift = m_SpecificInt(S);
+
+      if (!match(V0, m_And(m_Value(V), Mask)))
+        return nullptr;
+      if (ShiftAlone) {
+        if (!match(V1, m_LShr(m_Specific(V), Shift)))
+          return nullptr;
+      } else {
+        if (!match(V1, m_And(m_LShr(m_Specific(V), Shift), Mask)))
+          return nullptr;
+      }
+      return V;
+    };
+
+    if (Value *T = matchAndShift(Op0, Op1))
+      return T;
+    if (Value *T = matchAndShift(Op1, Op0))
+      return T;
+    return nullptr;
+  };
+
+  // Generate the bitmask for the & operation. BW is the bit-width of the
+  // entire mask. The masks are:
+  //   0b01010101..01010101     0x55..55      1 bit  every 2 bits
+  //   0b00110011..00110011     0x33..35      2 bits every 4 bits
+  //   0b00000111..00000111     0x07..07      3 bits every 8 bits
+  //   ...                      ...        logS bits every S bits
+  // Normally the masks would be 01010101, 00110011, 00001111, i.e. the
+  // number of contiguous 1 bits in each group would be twice the number
+  // in the previous mask, but by the time this code runs, the "demanded"
+  // bits have been optimized to only require one more 1 bit in each
+  // subsequent mask. This function generates the post-optimized masks.
+  auto getMask = [] (unsigned S, unsigned BW) -> APInt {
+    assert(isPowerOf2_32(S));
+    APInt M(BW, S-1);
+    APInt T(BW, 0);
+    while (M != 0) {
+      T |= M;
+      M <<= S;
+    }
+    return T;
+  };
+
+  Value *V = BI;
+  bool SA = true;
+  unsigned N = BW;
+  while (N > 1) {
+    unsigned S = N/2;
+    V = matchStep(V, S, getMask(N, BW), SA);
+    if (!V)
+      return nullptr;
+    N = S;
+    SA = false;
+  }
+
+  return V;
+}
+
+static Value *optimizeToCtpop(BinaryOperator *BI,
+      InstCombiner::BuilderTy *Builder) {
+  IntegerType *Ty = dyn_cast<IntegerType>(BI->getType());
+  if (!Ty)
+    return nullptr;
+
+  // Take the first shift amount feeding the add, and assume this is the
+  // last shift in the popcnt computation.
+  Value *Op0 = nullptr, *Op1 = nullptr;
+  if (!match(BI, m_Add(m_Value(Op0), m_Value(Op1))))
+    return nullptr;
+
+  // Shift by half-width.
+  uint64_t SH = 0;
+  if (!match(Op0, m_And(m_Value(), m_LShr(m_Value(), m_ConstantInt(SH)))) &&
+      !match(Op1, m_And(m_Value(), m_LShr(m_Value(), m_ConstantInt(SH)))) &&
+      !match(Op0, m_LShr(m_Value(), m_ConstantInt(SH))) &&
+      !match(Op1, m_LShr(m_Value(), m_ConstantInt(SH))))
+    return nullptr;
+
+  if (SH < 4 || !isPowerOf2_64(SH))
+    return nullptr;
+
+  Value *V = matchCtpopW(BI, 2*SH);
+  if (!V)
+    return nullptr;
+
+  Module *M = Builder->GetInsertBlock()->getParent()->getParent();
+  unsigned TW = Ty->getBitWidth(), BW = 2*SH;
+  if (BW < TW) {
+    // BW is the bit width of the expression whose population count is
+    // being calculated. TW is the bit width of the type associated with
+    // that expression. Usually they are the same, but for ctpop8 the
+    // type may be "unsigned", i.e. 32-bit, while the ctpop8 would only
+    // consider the low 8 bits. In that case BW=8 and TW=32.
+    APInt K0(TW, 0), K1(TW, 0);
+    computeKnownBits(V, K0, K1, M->getDataLayout());
+    APInt Need0 = APInt::getBitsSet(TW, BW, TW);
+    if ((K0 & Need0) != Need0)
+      return nullptr;
+  }
+
+  Value *Func = Intrinsic::getDeclaration(M, Intrinsic::ctpop, {V->getType()});
+  CallInst *CI = Builder->CreateCall(Func, {V});
+  CI->setDebugLoc(BI->getDebugLoc());
+  return CI;
+}
+
 Instruction *InstCombiner::visitAdd(BinaryOperator &I) {
   bool Changed = SimplifyAssociativeOrCommutative(I);
   Value *LHS = I.getOperand(0), *RHS = I.getOperand(1);
 
   if (Value *V = SimplifyVectorOp(I))
     return ReplaceInstUsesWith(I, V);
 
   if (Value *V = SimplifyAddInst(LHS, RHS, I.hasNoSignedWrap(),
                                  I.hasNoUnsignedWrap(), DL, TLI, DT, AC))
     return ReplaceInstUsesWith(I, V);
 
    // (A*B)+(A*C) -> A*(B+C) etc
   if (Value *V = SimplifyUsingDistributiveLaws(I))
     return ReplaceInstUsesWith(I, V);
 
if (match(LHS, m_Or(m_Value(A), m_Value(B))) &&
          match(RHS, m_And(m_Specific(B), m_Specific(A))))) {
       auto *New = BinaryOperator::CreateAdd(A, B);
       New->setHasNoSignedWrap(I.hasNoSignedWrap());
       New->setHasNoUnsignedWrap(I.hasNoUnsignedWrap());
       return New;
     }
   }
 
+  if (Value *V = optimizeToCtpop(&I, Builder))
+    return ReplaceInstUsesWith(I, V);
+
   // TODO(jingyue): Consider WillNotOverflowSignedAdd and
   // WillNotOverflowUnsignedAdd to reduce the number of invocations of
   // computeKnownBits.
   if (!I.hasNoSignedWrap() && WillNotOverflowSignedAdd(LHS, RHS, I)) {
     Changed = true;
     I.setHasNoSignedWrap(true);
   }
   if (!I.hasNoUnsignedWrap() &&
Value *InstCombiner::OptimizePointerDifference(Value *LHS, Value *RHS,
 
   // If we have p - gep(p, ...)  then we have to negate the result.
   if (Swapped)
     Result = Builder->CreateNeg(Result, "diff.neg");
 
   return Builder->CreateIntCast(Result, Ty, true);
 }
 
+static Value *optimizeToCtlz(BinaryOperator *BI,
+      InstCombiner::BuilderTy *Builder) {
+  // Let bw = bitwidth(n),
+  // convert
+  //   n = n | (n>>1)
+  //   n = n | (n>>2)
+  //   n = n | (n>>4)
+  //   ...
+  //   n = n | (n>>bw/2)
+  //   bw - ctpop(n)
+  // to
+  //   ctlz(n).
+  // This code expects that the ctpop intrinsic has already been generated.
+
+  uint64_t BW = 0;
+  if (!match(BI, m_Sub(m_ConstantInt(BW), m_Intrinsic<Intrinsic::ctpop>())))
+    return nullptr;
+  // Get the argument of the ctpop.
+  Value *V = cast<User>(BI->getOperand(1))->getOperand(0);
+
+  // The argument to ctpop can be zero-extended in some cases. It is safe
+  // to ignore the zext.
+  if (auto *Z = dyn_cast<ZExtInst>(V))
+    V = Z->getOperand(0);
+
+  IntegerType *Ty = cast<IntegerType>(V->getType());
+  if (BW < Ty->getBitWidth())
+    return nullptr;
+
+  auto matchOrShift = [] (Value *V, unsigned S) -> Value* {
+    Value *Op0 = nullptr, *Op1 = nullptr;
+    if (!match(V, m_Or(m_Value(Op0), m_Value(Op1))))
+      return nullptr;
+    if (match(Op0, m_LShr(m_Specific(Op1), m_SpecificInt(S))))
+      return Op1;
+    if (match(Op1, m_LShr(m_Specific(Op0), m_SpecificInt(S))))
+      return Op0;
+    return nullptr;
+  };
+
+  unsigned N = BW;
+  while (N > 1) {
+    N /= 2;
+    V = matchOrShift(V, N);
+    if (!V)
+      return nullptr;
+  }
+
+  // The value of BW is the one that determines the type of ctlz's argument.
+  if (BW > Ty->getBitWidth()) {
+    IntegerType *ATy = IntegerType::get(BI->getContext(), BW);
+    V = Builder->CreateZExt(V, ATy);
+  }
+  Module *M = Builder->GetInsertBlock()->getParent()->getParent();
+  Value *Func = Intrinsic::getDeclaration(M, Intrinsic::ctlz, {V->getType()});
+  Value *False = ConstantInt::getFalse(BI->getContext());
+  CallInst *CI = Builder->CreateCall(Func, {V, False});
+  CI->setDebugLoc(BI->getDebugLoc());
+  if (BI->getType() != CI->getType())
+    return Builder->CreateZExt(CI, BI->getType());
+  return CI;
+}
+
 Instruction *InstCombiner::visitSub(BinaryOperator &I) {
   Value *Op0 = I.getOperand(0), *Op1 = I.getOperand(1);
-
   if (Value *V = SimplifyVectorOp(I))
     return ReplaceInstUsesWith(I, V);
 
   if (Value *V = SimplifySubInst(Op0, Op1, I.hasNoSignedWrap(),
                                  I.hasNoUnsignedWrap(), DL, TLI, DT, AC))
     return ReplaceInstUsesWith(I, V);
 
   // (A*B)-(A*C) -> A*(B-C) etc
if (Value *Res = OptimizePointerDifference(LHSOp, RHSOp, I.getType()))
       return ReplaceInstUsesWith(I, Res);
 
   // trunc(p)-trunc(q) -> trunc(p-q)
   if (match(Op0, m_Trunc(m_PtrToInt(m_Value(LHSOp)))) &&
       match(Op1, m_Trunc(m_PtrToInt(m_Value(RHSOp)))))
     if (Value *Res = OptimizePointerDifference(LHSOp, RHSOp, I.getType()))
       return ReplaceInstUsesWith(I, Res);
 
+  if (Value *V = optimizeToCtlz(&I, Builder))
+    return ReplaceInstUsesWith(I, V);
+
   bool Changed = false;
   if (!I.hasNoSignedWrap() && WillNotOverflowSignedSub(Op0, Op1, I)) {
     Changed = true;
     I.setHasNoSignedWrap(true);
   }
   if (!I.hasNoUnsignedWrap() && WillNotOverflowUnsignedSub(Op0, Op1, I)) {
     Changed = true;
     I.setHasNoUnsignedWrap(true);

test/Transforms/InstCombine/ctlz-match.ll

+; RUN: opt -instcombine -S < %s | FileCheck %s
+
+; unsigned ctlz16(unsigned short t0) {
+;   t0 = t0 | (t0>>1);
+;   t0 = t0 | (t0>>2);
+;   t0 = t0 | (t0>>4);
+;   t0 = t0 | (t0>>8);
+;   unsigned t1 = (t0 & 0x5555) + ((t0>>1) & 0x5555);
+;   unsigned t2 = (t1 & 0x3333) + ((t1>>2) & 0x3333);
+;   unsigned t3 = (t2 & 0x0F0F) + ((t2>>4) & 0x0F0F);
+;   unsigned t4 = (t3 & 0x00FF) + ((t3>>8) & 0x00FF);
+;   return 16-t4;
+; }
+;
+; CHECK: define i32 @ctlz16
+; CHECK: [[V0:%[a-zA-Z0-9_]+]] = call i16 @llvm.ctlz.i16(i16 %t0, i1 false)
+; CHECK: zext i16 [[V0]] to i32
+define i32 @ctlz16(i16 zeroext %t0) #0 {
+entry:
+  %conv = zext i16 %t0 to i32
+  %shr = ashr i32 %conv, 1
+  %or = or i32 %conv, %shr
+  %conv2 = trunc i32 %or to i16
+  %conv3 = zext i16 %conv2 to i32
+  %shr5 = ashr i32 %conv3, 2
+  %or6 = or i32 %conv3, %shr5
+  %conv7 = trunc i32 %or6 to i16
+  %conv8 = zext i16 %conv7 to i32
+  %shr10 = ashr i32 %conv8, 4
+  %or11 = or i32 %conv8, %shr10
+  %conv12 = trunc i32 %or11 to i16
+  %conv13 = zext i16 %conv12 to i32
+  %shr15 = ashr i32 %conv13, 8
+  %or16 = or i32 %conv13, %shr15
+  %conv17 = trunc i32 %or16 to i16
+  %conv18 = zext i16 %conv17 to i32
+  %and = and i32 %conv18, 21845
+  %shr20 = ashr i32 %conv18, 1
+  %and21 = and i32 %shr20, 21845
+  %add = add nsw i32 %and, %and21
+  %and22 = and i32 %add, 13107
+  %shr23 = lshr i32 %add, 2
+  %and24 = and i32 %shr23, 13107
+  %add25 = add i32 %and22, %and24
+  %and26 = and i32 %add25, 3855
+  %shr27 = lshr i32 %add25, 4
+  %and28 = and i32 %shr27, 3855
+  %add29 = add i32 %and26, %and28
+  %and30 = and i32 %add29, 255
+  %shr31 = lshr i32 %add29, 8
+  %and32 = and i32 %shr31, 255
+  %add33 = add i32 %and30, %and32
+  %sub = sub i32 16, %add33
+  ret i32 %sub
+}
+
+
+; unsigned ctlz32(unsigned t0) {
+;   t0 = t0 | (t0>>1);
+;   t0 = t0 | (t0>>2);
+;   t0 = t0 | (t0>>4);
+;   t0 = t0 | (t0>>8);
+;   t0 = t0 | (t0>>16);
+;   unsigned t1 = (t0 & 0x55555555) + ((t0>>1)  & 0x55555555);
+;   unsigned t2 = (t1 & 0x33333333) + ((t1>>2)  & 0x33333333);
+;   unsigned t3 = (t2 & 0x0F0F0F0F) + ((t2>>4)  & 0x0F0F0F0F);
+;   unsigned t4 = (t3 & 0x00FF00FF) + ((t3>>8)  & 0x00FF00FF);
+;   unsigned t5 = (t4 & 0x0000FFFF) + ((t4>>16) & 0x0000FFFF);
+;   return 32-t5;
+; }
+;
+; CHECK: define i32 @ctlz32
+; CHECK: @llvm.ctlz.i32(i32 %t0, i1 false)
+define i32 @ctlz32(i32 %t0) #0 {
+entry:
+  %shr = lshr i32 %t0, 1
+  %or = or i32 %t0, %shr
+  %shr1 = lshr i32 %or, 2
+  %or2 = or i32 %or, %shr1
+  %shr3 = lshr i32 %or2, 4
+  %or4 = or i32 %or2, %shr3
+  %shr5 = lshr i32 %or4, 8
+  %or6 = or i32 %or4, %shr5
+  %shr7 = lshr i32 %or6, 16
+  %or8 = or i32 %or6, %shr7
+  %and = and i32 %or8, 1431655765
+  %shr9 = lshr i32 %or8, 1
+  %and10 = and i32 %shr9, 1431655765
+  %add = add i32 %and, %and10
+  %and11 = and i32 %add, 858993459
+  %shr12 = lshr i32 %add, 2
+  %and13 = and i32 %shr12, 858993459
+  %add14 = add i32 %and11, %and13
+  %and15 = and i32 %add14, 252645135
+  %shr16 = lshr i32 %add14, 4
+  %and17 = and i32 %shr16, 252645135
+  %add18 = add i32 %and15, %and17
+  %and19 = and i32 %add18, 16711935
+  %shr20 = lshr i32 %add18, 8
+  %and21 = and i32 %shr20, 16711935
+  %add22 = add i32 %and19, %and21
+  %and23 = and i32 %add22, 65535
+  %shr24 = lshr i32 %add22, 16
+  %and25 = and i32 %shr24, 65535
+  %add26 = add i32 %and23, %and25
+  %sub = sub i32 32, %add26
+  ret i32 %sub
+}
+
+
+; typedef unsigned long long u64_t;
+; u64_t ctlz64(u64_t t0) {
+;   t0 = t0 | (t0>>1);
+;   t0 = t0 | (t0>>2);
+;   t0 = t0 | (t0>>4);
+;   t0 = t0 | (t0>>8);
+;   t0 = t0 | (t0>>16);
+;   t0 = t0 | (t0>>32);
+;   u64_t t1 = (t0 & 0x5555555555555555LL) + ((t0>>1)  & 0x5555555555555555LL);
+;   u64_t t2 = (t1 & 0x3333333333333333LL) + ((t1>>2)  & 0x3333333333333333LL);
+;   u64_t t3 = (t2 & 0x0F0F0F0F0F0F0F0FLL) + ((t2>>4)  & 0x0F0F0F0F0F0F0F0FLL);
+;   u64_t t4 = (t3 & 0x00FF00FF00FF00FFLL) + ((t3>>8)  & 0x00FF00FF00FF00FFLL);
+;   u64_t t5 = (t4 & 0x0000FFFF0000FFFFLL) + ((t4>>16) & 0x0000FFFF0000FFFFLL);
+;   u64_t t6 = (t5 & 0x00000000FFFFFFFFLL) + ((t5>>32) & 0x00000000FFFFFFFFLL);
+;   return 64-t6;
+; }
+;
+; CHECK: define i64 @ctlz64
+; CHECK: @llvm.ctlz.i64(i64 %t0, i1 false)
+define i64 @ctlz64(i64 %t0) #0 {
+entry:
+  %shr = lshr i64 %t0, 1
+  %or = or i64 %t0, %shr
+  %shr1 = lshr i64 %or, 2
+  %or2 = or i64 %or, %shr1
+  %shr3 = lshr i64 %or2, 4
+  %or4 = or i64 %or2, %shr3
+  %shr5 = lshr i64 %or4, 8
+  %or6 = or i64 %or4, %shr5
+  %shr7 = lshr i64 %or6, 16
+  %or8 = or i64 %or6, %shr7
+  %shr9 = lshr i64 %or8, 32
+  %or10 = or i64 %or8, %shr9
+  %and = and i64 %or10, 6148914691236517205
+  %shr11 = lshr i64 %or10, 1
+  %and12 = and i64 %shr11, 6148914691236517205
+  %add = add i64 %and, %and12
+  %and13 = and i64 %add, 3689348814741910323
+  %shr14 = lshr i64 %add, 2
+  %and15 = and i64 %shr14, 3689348814741910323
+  %add16 = add i64 %and13, %and15
+  %and17 = and i64 %add16, 1085102592571150095
+  %shr18 = lshr i64 %add16, 4
+  %and19 = and i64 %shr18, 1085102592571150095
+  %add20 = add i64 %and17, %and19
+  %and21 = and i64 %add20, 71777214294589695
+  %shr22 = lshr i64 %add20, 8
+  %and23 = and i64 %shr22, 71777214294589695
+  %add24 = add i64 %and21, %and23
+  %and25 = and i64 %add24, 281470681808895
+  %shr26 = lshr i64 %add24, 16
+  %and27 = and i64 %shr26, 281470681808895
+  %add28 = add i64 %and25, %and27
+  %and29 = and i64 %add28, 4294967295
+  %shr30 = lshr i64 %add28, 32
+  %and31 = and i64 %shr30, 4294967295
+  %add32 = add i64 %and29, %and31
+  %sub = sub i64 64, %add32
+  ret i64 %sub
+}
+
+attributes #0 = { nounwind }

test/Transforms/InstCombine/ctpop-match.ll

+; RUN: opt -instcombine -S < %s | FileCheck %s
+
+; unsigned pop8(unsigned char t0) {
+;   unsigned t1 = (t0 & 0x55) + ((t0>>1) & 0x55);
+;   unsigned t2 = (t1 & 0x33) + ((t1>>2) & 0x33);
+;   unsigned t3 = (t2 & 0x0F) + ((t2>>4) & 0x0F);
+;   return t3;
+; }
+;
+; CHECK: define i32 @pop8
+; CHECK: [[ARG8:%[a-zA-Z0-9_]+]] = zext i8 %t0 to i32
+; CHECK: @llvm.ctpop.i32(i32 [[ARG8]])
+define i32 @pop8(i8 zeroext %t0) #0 {
+entry:
+  %conv = zext i8 %t0 to i32
+  %and = and i32 %conv, 85
+  %shr = ashr i32 %conv, 1
+  %and2 = and i32 %shr, 85
+  %add = add nsw i32 %and, %and2
+  %and3 = and i32 %add, 51
+  %shr4 = lshr i32 %add, 2
+  %and5 = and i32 %shr4, 51
+  %add6 = add i32 %and3, %and5
+  %and7 = and i32 %add6, 15
+  %shr8 = lshr i32 %add6, 4
+  %and9 = and i32 %shr8, 15
+  %add10 = add i32 %and7, %and9
+  ret i32 %add10
+}
+
+
+; unsigned pop16(unsigned short t0) {
+;   unsigned t1 = (t0 & 0x5555) + ((t0>>1) & 0x5555);
+;   unsigned t2 = (t1 & 0x3333) + ((t1>>2) & 0x3333);
+;   unsigned t3 = (t2 & 0x0F0F) + ((t2>>4) & 0x0F0F);
+;   unsigned t4 = (t3 & 0x00FF) + ((t3>>8) & 0x00FF);
+;   return t4;
+; }
+;
+; CHECK: define i32 @pop16
+; CHECK: [[ARG16:%[a-zA-Z0-9_]+]] = zext i16 %t0 to i32
+; CHECK: @llvm.ctpop.i32(i32 [[ARG16]])
+define i32 @pop16(i16 zeroext %t0) #0 {
+entry:
+  %conv = zext i16 %t0 to i32
+  %and = and i32 %conv, 21845
+  %shr = ashr i32 %conv, 1
+  %and2 = and i32 %shr, 21845
+  %add = add nsw i32 %and, %and2
+  %and3 = and i32 %add, 13107
+  %shr4 = lshr i32 %add, 2
+  %and5 = and i32 %shr4, 13107
+  %add6 = add i32 %and3, %and5
+  %and7 = and i32 %add6, 3855
+  %shr8 = lshr i32 %add6, 4
+  %and9 = and i32 %shr8, 3855
+  %add10 = add i32 %and7, %and9
+  %and11 = and i32 %add10, 255
+  %shr12 = lshr i32 %add10, 8
+  %and13 = and i32 %shr12, 255
+  %add14 = add i32 %and11, %and13
+  ret i32 %add14
+}
+
+
+; unsigned pop32(unsigned t0) {
+;   unsigned t1 = (t0 & 0x55555555) + ((t0>>1)  & 0x55555555);
+;   unsigned t2 = (t1 & 0x33333333) + ((t1>>2)  & 0x33333333);
+;   unsigned t3 = (t2 & 0x0F0F0F0F) + ((t2>>4)  & 0x0F0F0F0F);
+;   unsigned t4 = (t3 & 0x00FF00FF) + ((t3>>8)  & 0x00FF00FF);
+;   unsigned t5 = (t4 & 0x0000FFFF) + ((t4>>16) & 0x0000FFFF);
+;   return t5;
+; }
+;
+; CHECK: define i32 @pop32
+; CHECK: @llvm.ctpop.i32(i32 %t0)
+define i32 @pop32(i32 %t0) #0 {
+entry:
+  %and = and i32 %t0, 1431655765
+  %shr = lshr i32 %t0, 1
+  %and1 = and i32 %shr, 1431655765
+  %add = add i32 %and, %and1
+  %and2 = and i32 %add, 858993459
+  %shr3 = lshr i32 %add, 2
+  %and4 = and i32 %shr3, 858993459
+  %add5 = add i32 %and2, %and4
+  %and6 = and i32 %add5, 252645135
+  %shr7 = lshr i32 %add5, 4
+  %and8 = and i32 %shr7, 252645135
+  %add9 = add i32 %and6, %and8
+  %and10 = and i32 %add9, 16711935
+  %shr11 = lshr i32 %add9, 8
+  %and12 = and i32 %shr11, 16711935
+  %add13 = add i32 %and10, %and12
+  %and14 = and i32 %add13, 65535
+  %shr15 = lshr i32 %add13, 16
+  %and16 = and i32 %shr15, 65535
+  %add17 = add i32 %and14, %and16
+  ret i32 %add17
+}
+
+
+; typedef unsigned long long u64_t;
+; u64_t pop64(u64_t t0) {
+;   u64_t t1 = (t0 & 0x5555555555555555LL) + ((t0>>1)  & 0x5555555555555555LL);
+;   u64_t t2 = (t1 & 0x3333333333333333LL) + ((t1>>2)  & 0x3333333333333333LL);
+;   u64_t t3 = (t2 & 0x0F0F0F0F0F0F0F0FLL) + ((t2>>4)  & 0x0F0F0F0F0F0F0F0FLL);
+;   u64_t t4 = (t3 & 0x00FF00FF00FF00FFLL) + ((t3>>8)  & 0x00FF00FF00FF00FFLL);
+;   u64_t t5 = (t4 & 0x0000FFFF0000FFFFLL) + ((t4>>16) & 0x0000FFFF0000FFFFLL);
+;   u64_t t6 = (t5 & 0x00000000FFFFFFFFLL) + ((t5>>32) & 0x00000000FFFFFFFFLL);
+;   return t6;
+; }
+;
+; CHECK: define i64 @pop64
+; CHECK: @llvm.ctpop.i64(i64 %t0)
+define i64 @pop64(i64 %t0) #0 {
+entry:
+  %and = and i64 %t0, 6148914691236517205
+  %shr = lshr i64 %t0, 1
+  %and1 = and i64 %shr, 6148914691236517205
+  %add = add i64 %and, %and1
+  %and2 = and i64 %add, 3689348814741910323
+  %shr3 = lshr i64 %add, 2
+  %and4 = and i64 %shr3, 3689348814741910323
+  %add5 = add i64 %and2, %and4
+  %and6 = and i64 %add5, 1085102592571150095
+  %shr7 = lshr i64 %add5, 4
+  %and8 = and i64 %shr7, 1085102592571150095
+  %add9 = add i64 %and6, %and8
+  %and10 = and i64 %add9, 71777214294589695
+  %shr11 = lshr i64 %add9, 8
+  %and12 = and i64 %shr11, 71777214294589695
+  %add13 = add i64 %and10, %and12
+  %and14 = and i64 %add13, 281470681808895
+  %shr15 = lshr i64 %add13, 16
+  %and16 = and i64 %shr15, 281470681808895
+  %add17 = add i64 %and14, %and16
+  %and18 = and i64 %add17, 4294967295
+  %shr19 = lshr i64 %add17, 32
+  %and20 = and i64 %shr19, 4294967295
+  %add21 = add i64 %and18, %and20
+  ret i64 %add21
+}
+
+attributes #0 = { nounwind }