[X86] Use autogenerated result for switch-bt.ll test; NFC

[RKSimon]

llvm/test/CodeGen/X86/switch-bt.ll

14

Don't these need removing as well?

258

can you move these helper comments someplace suitable (either in the switch statement for the 0/3/6 + 1/4/7 case groups or the test header comment)

[goldstein.w.n]

Fix comments

[RKSimon]

LGTM

llvm/test/CodeGen/X86/switch-bt.ll

-; RUN: llc -mtriple=x86_64-- -asm-verbose=false < %s -jump-table-density=40 -switch-peel-threshold=101 | FileCheck %s
+; NOTE: Assertions have been autogenerated by utils/update_llc_test_checks.py
+; RUN: llc -mtriple=x86_64-- < %s -jump-table-density=40 -switch-peel-threshold=101 | FileCheck %s
 
 ; This switch should use bit tests, and the third bit test case is just
 ; testing for one possible value, so it doesn't need a bt.
 
 ;      CHECK: movabsq $2305843009482129440, %r
 ; CHECK-NEXT: btq %rax, %r
 ; CHECK-NEXT: jb
 ;     CHECK: movl  $671088640, %e
 ; CHECK-NEXT: btq %rax, %r
 ; CHECK-NEXT: jae
 ;      CHECK: testq %rax, %r
 ; CHECK-NEXT: j
 
 define void @test(ptr %l) nounwind {
+; CHECK-LABEL: test:
+; CHECK:       # %bb.0: # %entry
+; CHECK-NEXT:    pushq %rax
+; CHECK-NEXT:    movq %rdi, (%rsp)
+; CHECK-NEXT:    movsbl (%rdi), %eax
+; CHECK-NEXT:    addl $-33, %eax
+; CHECK-NEXT:    cmpl $61, %eax
+; CHECK-NEXT:    ja .LBB0_7
+; CHECK-NEXT:  # %bb.1: # %entry
+; CHECK-NEXT:    movabsq $2305843009482129440, %rcx # imm = 0x2000000010000020
+; CHECK-NEXT:    btq %rax, %rcx
+; CHECK-NEXT:    jb .LBB0_6
+; CHECK-NEXT:  # %bb.2: # %entry
+; CHECK-NEXT:    movl $671088640, %ecx # imm = 0x28000000
+; CHECK-NEXT:    btq %rax, %rcx
+; CHECK-NEXT:    jae .LBB0_3
+; CHECK-NEXT:  # %bb.5: # %sw.bb
+; CHECK-NEXT:    xorl %edi, %edi
+; CHECK-NEXT:    jmp .LBB0_8
+; CHECK-NEXT:  .LBB0_6: # %sw.bb2
+; CHECK-NEXT:    movl $1, %edi
+; CHECK-NEXT:    jmp .LBB0_8
+; CHECK-NEXT:  .LBB0_3: # %entry
+; CHECK-NEXT:    testq %rax, %rax
+; CHECK-NEXT:    jne .LBB0_7
+; CHECK-NEXT:  # %bb.4: # %sw.bb4
+; CHECK-NEXT:    movl $3, %edi
+; CHECK-NEXT:    jmp .LBB0_8
+; CHECK-NEXT:  .LBB0_7: # %sw.default
+; CHECK-NEXT:    movl $97, %edi
+; CHECK-NEXT:  .LBB0_8: # %sw.epilog
+; CHECK-NEXT:    callq foo@PLT
+; CHECK-NEXT:    popq %rax
+; CHECK-NEXT:    retq
 entry:
   %l.addr = alloca ptr, align 8                   ; <ptr> [#uses=2]
   store ptr %l, ptr %l.addr
   %tmp = load ptr, ptr %l.addr                        ; <ptr> [#uses=1]
   %tmp1 = load i8, ptr %tmp                           ; <i8> [#uses=1]
   %conv = sext i8 %tmp1 to i32                    ; <i32> [#uses=1]
   switch i32 %conv, label %sw.default [
     i32 62, label %sw.bb

 }
 
 declare void @foo(i32)
 
 ; Don't zero extend the test operands to pointer type if it can be avoided.
 ; rdar://8781238
 define void @test2(i32 %x) nounwind ssp {
 ; CHECK-LABEL: test2:
-; CHECK: cmpl $6
-; CHECK: ja
+; CHECK:       # %bb.0: # %entry
+; CHECK-NEXT:    cmpl $6, %edi
+; CHECK-NEXT:    ja .LBB1_2
+; CHECK-NEXT:  # %bb.1: # %entry
+; CHECK-NEXT:    movl $91, %eax
+; CHECK-NEXT:    btl %edi, %eax
+; CHECK-NEXT:    jae .LBB1_2
+; CHECK-NEXT:  # %bb.3: # %if.then
+; CHECK-NEXT:    jmp bar@PLT # TAILCALL
+; CHECK-NEXT:  .LBB1_2: # %if.end
+; CHECK-NEXT:    retq
 
-; CHECK-NEXT: movl $91
-; CHECK-NOT: movl
-; CHECK-NEXT: btl
-; CHECK-NEXT: jae
 entry:
   switch i32 %x, label %if.end [
     i32 6, label %if.then
     i32 4, label %if.then
     i32 3, label %if.then
     i32 1, label %if.then
     i32 0, label %if.then
   ]
 
 if.then:                                          ; preds = %entry, %entry, %entry, %entry, %entry
   tail call void @bar() nounwind
   ret void
 
 if.end:                                           ; preds = %entry
   ret void
 }
 
 declare void @bar()
 
 define void @test3(i32 %x) nounwind {
 ; CHECK-LABEL: test3:
-; CHECK: cmpl $5
-; CHECK: ja
-; CHECK: cmpl $4
-; CHECK: je
+; CHECK:       # %bb.0:
+; CHECK-NEXT:    cmpl $5, %edi
+; CHECK-NEXT:    ja .LBB2_2
+; CHECK-NEXT:  # %bb.1:
+; CHECK-NEXT:    cmpl $4, %edi
+; CHECK-NEXT:    je .LBB2_2
+; CHECK-NEXT:  # %bb.3: # %if.then
+; CHECK-NEXT:    jmp bar@PLT # TAILCALL
+; CHECK-NEXT:  .LBB2_2: # %if.end
+; CHECK-NEXT:    retq
   switch i32 %x, label %if.end [
     i32 0, label %if.then
     i32 1, label %if.then
     i32 2, label %if.then
     i32 3, label %if.then
     i32 5, label %if.then
   ]
 if.then:
   tail call void @bar() nounwind
   ret void
 if.end:
   ret void
 }
 
 ; Ensure that optimizing for jump tables doesn't needlessly deteriorate the
 ; created binary tree search. See PR22262.
 define void @test4(i32 %x, ptr %y) {
 ; CHECK-LABEL: test4:
+; CHECK:       # %bb.0: # %entry
+; CHECK-NEXT:    cmpl $39, %edi
+; CHECK-NEXT:    jg .LBB3_5
+; CHECK-NEXT:  # %bb.1: # %entry
+; CHECK-NEXT:    cmpl $10, %edi
+; CHECK-NEXT:    je .LBB3_9
+; CHECK-NEXT:  # %bb.2: # %entry
+; CHECK-NEXT:    cmpl $20, %edi
+; CHECK-NEXT:    je .LBB3_10
+; CHECK-NEXT:  # %bb.3: # %entry
+; CHECK-NEXT:    cmpl $30, %edi
+; CHECK-NEXT:    jne .LBB3_13
+; CHECK-NEXT:  # %bb.4: # %sw.bb2
+; CHECK-NEXT:    movl $3, (%rsi)
+; CHECK-NEXT:    retq
+; CHECK-NEXT:  .LBB3_5: # %entry
+; CHECK-NEXT:    cmpl $40, %edi
+; CHECK-NEXT:    je .LBB3_11
+; CHECK-NEXT:  # %bb.6: # %entry
+; CHECK-NEXT:    cmpl $50, %edi
+; CHECK-NEXT:    je .LBB3_12
+; CHECK-NEXT:  # %bb.7: # %entry
+; CHECK-NEXT:    cmpl $60, %edi
+; CHECK-NEXT:    jne .LBB3_13
+; CHECK-NEXT:  # %bb.8: # %sw.bb5
+; CHECK-NEXT:    movl $6, (%rsi)
+; CHECK-NEXT:    retq
+; CHECK-NEXT:  .LBB3_9: # %sw.bb
+; CHECK-NEXT:    movl $1, (%rsi)
+; CHECK-NEXT:    retq
+; CHECK-NEXT:  .LBB3_10: # %sw.bb1
+; CHECK-NEXT:    movl $2, (%rsi)
+; CHECK-NEXT:    retq
+; CHECK-NEXT:  .LBB3_11: # %sw.bb3
+; CHECK-NEXT:    movl $4, (%rsi)
+; CHECK-NEXT:    retq
+; CHECK-NEXT:  .LBB3_12: # %sw.bb4
+; CHECK-NEXT:    movl $5, (%rsi)
+; CHECK-NEXT:    retq
+; CHECK-NEXT:  .LBB3_13: # %sw.default
+; CHECK-NEXT:    movl $7, (%rsi)
+; CHECK-NEXT:    retq
 
 entry:
   switch i32 %x, label %sw.default [
     i32 10, label %sw.bb
     i32 20, label %sw.bb1
     i32 30, label %sw.bb2
     i32 40, label %sw.bb3
     i32 50, label %sw.bb4

 sw.default:
   store i32 7, ptr %y
   br label %sw.epilog
 sw.epilog:
   ret void
 
 ; The balanced binary switch here would start with a comparison against 39, but
 ; it is currently starting with 29 because of the density-sum heuristic.
-; CHECK: cmpl $39
-; CHECK: jg
-; CHECK: cmpl $10
-; CHECK: je
-; CHECK: cmpl $20
-; CHECK: je
-; CHECK: cmpl $30
-; CHECK: jne
-; CHECK: cmpl $40
-; CHECK: je
-; CHECK: cmpl $50
-; CHECK: je
-; CHECK: cmpl $60
-; CHECK: jne
 }
 
 
 ; Omit the range check when the default case is unreachable, see PR43129.
 declare void @g(i32)
 define void @test5(i32 %x) {
-
-; CHECK-LABEL: test5
-; CHECK-NOT: cmp
+; CHECK-LABEL: test5:
+; CHECK:       # %bb.0: # %entry
+; CHECK-NEXT:    pushq %rax
+; CHECK-NEXT:    .cfi_def_cfa_offset 16
+; CHECK-NEXT:    movl $73, %eax
+; CHECK-NEXT:    btl %edi, %eax
+; CHECK-NEXT:    jb .LBB4_3
+; CHECK-NEXT:  # %bb.1: # %entry
+; CHECK-NEXT:    movl $146, %eax
+; CHECK-NEXT:    btl %edi, %eax
+; CHECK-NEXT:    jae .LBB4_2
+; CHECK-NEXT:  # %bb.4: # %bb1
+; CHECK-NEXT:    movl $1, %edi
+; CHECK-NEXT:    callq g@PLT
+; CHECK-NEXT:  .LBB4_3: # %bb0
+; CHECK-NEXT:    xorl %edi, %edi
+; CHECK-NEXT:    callq g@PLT
+; CHECK-NEXT:  .LBB4_2: # %bb2
+; CHECK-NEXT:    movl $2, %edi
+; CHECK-NEXT:    callq g@PLT
 
 ; 73 = 2^0 + 2^3 + 2^6
-; CHECK:      movl $73
-; CHECK-NEXT: btl
-; CHECK-NEXT: jb
 
 ; 146 = 2^1 + 2^4 + 2^7
-; CHECK-NEXT: movl $146
-; CHECK-NEXT: btl
-; CHECK-NEXT: jae
 
 
 entry:
   switch i32 %x, label %return [
     i32 0, label %bb0
     i32 3, label %bb0
     i32 6, label %bb0