ARMLoadStoreOptimizer: Rewrite LDM/STM matching logic.

[MatzeB]

Summary

This improves the logic in several ways and is a preparation for
followup patches:

• First perform an analysis and create a list of merge candidates, then transform. This simplifies the code in that you have don't have to care to much anymore that you may be holding iterators to MachineInstrs that get removed.
• Analyze/Transform basic blocks in reverse order. This allows to use LivePhysRegs to find free registers instead of the RegisterScavenger. The RegisterScavenger will become less precise in the future as it relies on the deprecated kill-flags.
• Return the newly created node in MergeOps so there's no need to look around in the schedule to find it.
• Rename some MBBI iterators to InsertBefore to make their role clear.
• General code cleanup.

[jmolloy]

Hi Mattias,

Sorry it took so long for me to get to this, for some reason Phab's mail didn't go direct to my inbox but got buried in list mail.

I have some comments, some of them are just me being dim, needing some enlightenment :)

Cheers,

James

lib/Target/ARM/ARMLoadStoreOptimizer.cpp

105

What does the "Idx" refer to? Position from the end of a block?

107

Again, from the back or front of the block? You've mentioned reverse position in the above struct, so disambiguation would be good here.

517

Does/should this respect the AllocationOrder for RegClass?

525

I think it's ambiguous what "Before" means here, given it operates in reverse order. Is this before-when-going-back-to-front?

569

Any particular reason you upped this limit?

654

Why has this been removed?

[MatzeB]

Address review comments.

lib/Target/ARM/ARMLoadStoreOptimizer.cpp

105

I added a comment:

/// Index in Instrs of the instruction being latest in the schedule.

107

I added a comment:

/// Index into the basic block where the merged instruction will be
/// inserted. (See MemOpQueueEntry.Position)

517

I had modeled this after the behaviour of the RegisterScavenger, but you are right taking the allocation order into account is a good thing; I changed it to use the allocation order.

525

Hmm I always have the problem that you often see code with a "position" pointing at an instruction and a set of registers that are live at that instruction. However that is highly ambiguous since you can only talk about live register immediately before or after an instruction, so when I write code I always use "before" or "after" when talking about liveness at an instruction. Anyway I changed the comment to resolve the ambiguity.

569

We didn't hit one case in a lit-test anymore and this fixed it, I think this is because we now use the "InsertBefore" instead of the "InsertAfter" position.

654

This is still happening but as part of MergeOpsUpdate() now around line 831.

[MatzeB]

New revision which also:

• Removes an unnecessary "if (NumRegs <= 1) return false;" from MergeOps()
• change "DebugLoc dl" into "DebugLoc DL"
• rebased on top of http://reviews.llvm.org/D10620

[MatzeB]

New revision picking up some cleanups in FormCandidates() suggested in the review of http://reviews.llvm.org/D10623

[MatzeB]

ping

[MatzeB]

New revision adapted to LLVM ToT. This changes the way r241003 (+CC Tim) deals with the problem where the base adjustment for an stm had an erroneous kill-flag by pushing the fixes to the code that creates those adjustments, so we don't unnecessarily loose the kill flag on the stm.

[rengolin]

Hi Matthias,

I'll wait for James' reviews, as this patch is too big and dense and he already had a look at it. In the future, please split the cosmetics (like renaming dl to DL) from feature patches. Each one of the bullets in your description would have been, separately, an easy patch to review.

If James is happy with the patch as is, I won't ask you to split it. But please do next time.

cheers,
--renato

[jmolloy]

Hi Matthias,

Sorry for the delay, I was on vacation. I'm happy as long as Tim is.

Cheers,

James

[t.p.northover]

I didn't spot anything horribly wrong (certainly nothing newly horribly wrong). The only thing that really needs fixing now is the dead code, which you can probably just remove.

lib/Target/ARM/ARMLoadStoreOptimizer.cpp

353

Maybe isLaodSingle or something? The name seems a bit too generic for what it's actually doing.

413

Looks dodgy, but I see you just moved this function around.

I've not quite managed to produce an example, but I'd be entirely unsurprised to see something like this used to load a Q-reg:

VLDMDIA %R0, %D0<def-dead>, %D1<def-dead>, %Q0<imp-def>

782

Commented code. Actually, commented code that I added, I think. It was written to prevent:

add rNewBase, rBase<kill>, #12
stm rNewBase, {..., rBase, ...}

where the Base was killed prematurely if it ended up actually being used in the store. This caused "-verify-machineinstr" failures, but nothing else that I've observed.

It looks like your code aroung line 654 replaces it adequately though.

lib/Target/ARM/ARMLoadStoreOptimizer.cpp

 #include "llvm/ADT/SmallSet.h"
 #include "llvm/ADT/SmallVector.h"
 #include "llvm/ADT/Statistic.h"
 #include "llvm/CodeGen/MachineBasicBlock.h"
 #include "llvm/CodeGen/MachineFunctionPass.h"
 #include "llvm/CodeGen/MachineInstr.h"
 #include "llvm/CodeGen/MachineInstrBuilder.h"
 #include "llvm/CodeGen/MachineRegisterInfo.h"
-#include "llvm/CodeGen/RegisterScavenging.h"
+#include "llvm/CodeGen/RegisterClassInfo.h"
 #include "llvm/CodeGen/SelectionDAGNodes.h"
+#include "llvm/CodeGen/LivePhysRegs.h"
 #include "llvm/IR/DataLayout.h"
 #include "llvm/IR/DerivedTypes.h"
 #include "llvm/IR/Function.h"
+#include "llvm/Support/Allocator.h"
 #include "llvm/Support/Debug.h"
 #include "llvm/Support/ErrorHandling.h"
 #include "llvm/Support/raw_ostream.h"
 #include "llvm/Target/TargetInstrInfo.h"
 #include "llvm/Target/TargetMachine.h"
 #include "llvm/Target/TargetRegisterInfo.h"
 using namespace llvm;
 

 
 namespace {
   /// Post- register allocation pass the combine load / store instructions to
   /// form ldm / stm instructions.
   struct ARMLoadStoreOpt : public MachineFunctionPass {
     static char ID;
     ARMLoadStoreOpt() : MachineFunctionPass(ID) {}
 
+    const MachineFunction *MF;
     const TargetInstrInfo *TII;
     const TargetRegisterInfo *TRI;
+    const MachineRegisterInfo *MRI;
     const ARMSubtarget *STI;
     const TargetLowering *TL;
     ARMFunctionInfo *AFI;
-    RegScavenger *RS;
+    LivePhysRegs LiveRegs;
+    RegisterClassInfo RegClassInfo;
+    MachineBasicBlock::const_iterator LiveRegPos;
+    bool LiveRegsValid;
+    bool RegClassInfoValid;
     bool isThumb1, isThumb2;
 
     bool runOnMachineFunction(MachineFunction &Fn) override;
 
     const char *getPassName() const override {
       return "ARM load / store optimization pass";
     }
 
   private:
+    /// A set of MachineInstrs with same base address sorted by offset.
     struct MemOpQueueEntry {
-      int Offset;
-      unsigned Reg;
-      bool isKill;
-      unsigned Position;
-      MachineBasicBlock::iterator MBBI;
-      bool Merged;
-      MemOpQueueEntry(int o, unsigned r, bool k, unsigned p,
-                      MachineBasicBlock::iterator i)
-        : Offset(o), Reg(r), isKill(k), Position(p), MBBI(i), Merged(false) {}
+      MachineInstr *MI;
+      int Offset;        ///< Load/Store offset.
+      unsigned Position; ///< Position as counted from end of basic block.
+      MemOpQueueEntry(MachineInstr *MI, int Offset, unsigned Position)
+        : MI(MI), Offset(Offset), Position(Position) {}
     };
     typedef SmallVector<MemOpQueueEntry,8> MemOpQueue;
-    typedef MemOpQueue::iterator MemOpQueueIter;
 
-    void findUsesOfImpDef(SmallVectorImpl<MachineOperand *> &UsesOfImpDefs,
-                          const MemOpQueue &MemOps, unsigned DefReg,
-                          unsigned RangeBegin, unsigned RangeEnd);
+    /// A set of MachineInstrs that fulfill (nearly all) conditions to get
+    /// merged into a LDM/STM.
+    struct MergeCandidate {
+      /// List of instructions ordered by load/store offset.
+      SmallVector<MachineInstr*, 4> Instrs;
+      /// Index in Instrs of the instruction being latest in the schedule.
+      unsigned LatestMIIdx;
+      /// Index in Instrs of the instruction being earliest in the schedule.
+      unsigned EarliestMIIdx;
+      /// Index into the basic block where the merged instruction will be
+      /// inserted. (See MemOpQueueEntry.Position)
+      unsigned InsertPos;
+    };
+    BumpPtrAllocator Allocator;
+    SmallVector<const MergeCandidate*,4> Candidates;
+
+    void moveLiveRegsBefore(const MachineBasicBlock &MBB,
+                            MachineBasicBlock::const_iterator Before);
+    unsigned findFreeReg(const TargetRegisterClass &RegClass);
     void UpdateBaseRegUses(MachineBasicBlock &MBB,
                            MachineBasicBlock::iterator MBBI,
-                           DebugLoc dl, unsigned Base, unsigned WordOffset,
+                           DebugLoc DL, unsigned Base, unsigned WordOffset,
                            ARMCC::CondCodes Pred, unsigned PredReg);
-    bool MergeOps(MachineBasicBlock &MBB, MachineBasicBlock::iterator MBBI,
-                  int Offset, unsigned Base, bool BaseKill, unsigned Opcode,
-                  ARMCC::CondCodes Pred, unsigned PredReg, unsigned Scratch,
-                  DebugLoc dl,
-                  ArrayRef<std::pair<unsigned, bool> > Regs,
-                  ArrayRef<unsigned> ImpDefs);
-    void MergeOpsUpdate(MachineBasicBlock &MBB,
-                        MemOpQueue &MemOps,
-                        unsigned memOpsBegin,
-                        unsigned memOpsEnd,
-                        unsigned insertAfter,
-                        int Offset,
-                        unsigned Base,
-                        bool BaseKill,
-                        unsigned Opcode,
-                        ARMCC::CondCodes Pred,
-                        unsigned PredReg,
-                        unsigned Scratch,
-                        DebugLoc dl,
-                        SmallVectorImpl<MachineBasicBlock::iterator> &Merges);
-    void MergeLDR_STR(MachineBasicBlock &MBB, unsigned SIndex, unsigned Base,
-                      unsigned Opcode, unsigned Size,
-                      ARMCC::CondCodes Pred, unsigned PredReg,
-                      unsigned Scratch, MemOpQueue &MemOps,
-                      SmallVectorImpl<MachineBasicBlock::iterator> &Merges);
-    void AdvanceRS(MachineBasicBlock &MBB, MemOpQueue &MemOps);
+    MachineInstr *MergeOps(MachineBasicBlock &MBB,
+                           MachineBasicBlock::iterator InsertBefore, int Offset,
+                           unsigned Base, bool BaseKill, unsigned Opcode,
+                           ARMCC::CondCodes Pred, unsigned PredReg, DebugLoc DL,
+                           ArrayRef<std::pair<unsigned, bool>> Regs);
+    void FormCandidates(const MemOpQueue &MemOps);
+    MachineInstr *MergeOpsUpdate(const MergeCandidate &Cand);
     bool FixInvalidRegPairOp(MachineBasicBlock &MBB,
                              MachineBasicBlock::iterator &MBBI);
-    bool MergeBaseUpdateLoadStore(MachineBasicBlock &MBB,
-                                  MachineBasicBlock::iterator MBBI,
-                                  const TargetInstrInfo *TII,
-                                  bool &Advance,
-                                  MachineBasicBlock::iterator &I);
-    bool MergeBaseUpdateLSMultiple(MachineBasicBlock &MBB,
-                                   MachineBasicBlock::iterator MBBI,
-                                   bool &Advance,
-                                   MachineBasicBlock::iterator &I);
+    bool MergeBaseUpdateLoadStore(MachineInstr *MI);
+    bool MergeBaseUpdateLSMultiple(MachineInstr *MI);
     bool LoadStoreMultipleOpti(MachineBasicBlock &MBB);
     bool MergeReturnIntoLDM(MachineBasicBlock &MBB);
   };
   char ARMLoadStoreOpt::ID = 0;
 } // namespace
 
 static bool definesCPSR(const MachineInstr *MI) {
   for (const auto &MO : MI->operands()) {
ARM_AM::AddrOpc Op = isAM3 ? ARM_AM::getAM3Op(OffField)
     : ARM_AM::getAM5Op(OffField);
 
   if (Op == ARM_AM::sub)
     return -Offset;
 
   return Offset;
 }
 
+static const MachineOperand &getLoadStoreBaseOp(const MachineInstr &MI) {
+  return MI.getOperand(1);
+}
+
+static const MachineOperand &getLoadStoreRegOp(const MachineInstr &MI) {
+  return MI.getOperand(0);
+}
+
 static int getLoadStoreMultipleOpcode(unsigned Opcode, ARM_AM::AMSubMode Mode) {
   switch (Opcode) {
   default: llvm_unreachable("Unhandled opcode!");
   case ARM::LDRi12:
     ++NumLDMGened;
     switch (Mode) {
     default: llvm_unreachable("Unhandled submode!");
     case ARM_AM::ia: return ARM::LDMIA;

 static bool isT2i32Store(unsigned Opc) {
   return Opc == ARM::t2STRi12 || Opc == ARM::t2STRi8;
 }
 
 static bool isi32Store(unsigned Opc) {
   return Opc == ARM::STRi12 || isT1i32Store(Opc) || isT2i32Store(Opc);
 }
 
+static bool isLoad(unsigned Opc) {
+  return isi32Load(Opc) || Opc == ARM::VLDRS || Opc == ARM::VLDRD;
+}
+
 static unsigned getImmScale(unsigned Opc) {
   switch (Opc) {
   default: llvm_unreachable("Unhandled opcode!");
   case ARM::tLDRi:
   case ARM::tSTRi:
   case ARM::tLDRspi:
   case ARM::tSTRspi:
     return 1;
   case ARM::tLDRHi:
   case ARM::tSTRHi:
     return 2;
   case ARM::tLDRBi:
   case ARM::tSTRBi:
     return 4;
   }
 }
 
+static unsigned getLSMultipleTransferSize(const MachineInstr *MI) {
+  switch (MI->getOpcode()) {
+  default: return 0;
+  case ARM::LDRi12:
+  case ARM::STRi12:
+  case ARM::tLDRi:
+  case ARM::tSTRi:
+  case ARM::tLDRspi:
+  case ARM::tSTRspi:
+  case ARM::t2LDRi8:
+  case ARM::t2LDRi12:
+  case ARM::t2STRi8:
+  case ARM::t2STRi12:
+  case ARM::VLDRS:
+  case ARM::VSTRS:
+    return 4;
+  case ARM::VLDRD:
+  case ARM::VSTRD:
+    return 8;
+  case ARM::LDMIA:
+  case ARM::LDMDA:
+  case ARM::LDMDB:
+  case ARM::LDMIB:
+  case ARM::STMIA:
+  case ARM::STMDA:
+  case ARM::STMDB:
+  case ARM::STMIB:
+  case ARM::tLDMIA:
+  case ARM::tLDMIA_UPD:
+  case ARM::tSTMIA_UPD:
+  case ARM::t2LDMIA:
+  case ARM::t2LDMDB:
+  case ARM::t2STMIA:
+  case ARM::t2STMDB:
+  case ARM::VLDMSIA:
+  case ARM::VSTMSIA:
+    return (MI->getNumOperands() - MI->getDesc().getNumOperands() + 1) * 4;
+  case ARM::VLDMDIA:
+  case ARM::VSTMDIA:
+    return (MI->getNumOperands() - MI->getDesc().getNumOperands() + 1) * 8;
+  }
+}
+
 /// Update future uses of the base register with the offset introduced
 /// due to writeback. This function only works on Thumb1.
 void
 ARMLoadStoreOpt::UpdateBaseRegUses(MachineBasicBlock &MBB,
                                    MachineBasicBlock::iterator MBBI,
-                                   DebugLoc dl, unsigned Base,
+                                   DebugLoc DL, unsigned Base,
                                    unsigned WordOffset,
                                    ARMCC::CondCodes Pred, unsigned PredReg) {
   assert(isThumb1 && "Can only update base register uses for Thumb1!");
   // Start updating any instructions with immediate offsets. Insert a SUB before
   // the first non-updateable instruction (if any).
   for (; MBBI != MBB.end(); ++MBBI) {
     bool InsertSub = false;
     unsigned Opc = MBBI->getOpcode();
if (MBBI->readsRegister(Base)) {
         // The MachineOperand containing the offset immediate is the last one
         // before predicates.
         MachineOperand &MO =
           MBBI->getOperand(MBBI->getDesc().getNumOperands() - 3);
         // The offsets are scaled by 1, 2 or 4 depending on the Opcode.
         Offset = MO.getImm() - WordOffset * getImmScale(Opc);
 
         // If storing the base register, it needs to be reset first.
-        unsigned InstrSrcReg = MBBI->getOperand(0).getReg();
+        unsigned InstrSrcReg = getLoadStoreRegOp(*MBBI).getReg();
 
         if (Offset >= 0 && !(IsStore && InstrSrcReg == Base))
           MO.setImm(Offset);
         else
           InsertSub = true;
 
       } else if ((Opc == ARM::tSUBi8 || Opc == ARM::tADDi8) &&
                  !definesCPSR(MBBI)) {
if (MBBI->readsRegister(Base)) {
       // Since SUBS sets the condition flags, we can't place the base reset
       // after an instruction that has a live CPSR def.
       // The base register might also contain an argument for a function call.
       InsertSub = true;
     }
 
     if (InsertSub) {
       // An instruction above couldn't be updated, so insert a sub.
-      AddDefaultT1CC(BuildMI(MBB, MBBI, dl, TII->get(ARM::tSUBi8), Base), true)
+      AddDefaultT1CC(BuildMI(MBB, MBBI, DL, TII->get(ARM::tSUBi8), Base), true)
         .addReg(Base).addImm(WordOffset * 4).addImm(Pred).addReg(PredReg);
       return;
     }
 
     if (MBBI->killsRegister(Base))
       // Register got killed. Stop updating.
       return;
   }
 
   // End of block was reached.
   if (MBB.succ_size() > 0) {
     // FIXME: Because of a bug, live registers are sometimes missing from
     // the successor blocks' live-in sets. This means we can't trust that
     // information and *always* have to reset at the end of a block.
     // See PR21029.
     if (MBBI != MBB.end()) --MBBI;
     AddDefaultT1CC(
-      BuildMI(MBB, MBBI, dl, TII->get(ARM::tSUBi8), Base), true)
+      BuildMI(MBB, MBBI, DL, TII->get(ARM::tSUBi8), Base), true)
       .addReg(Base).addImm(WordOffset * 4).addImm(Pred).addReg(PredReg);
   }
 }
 
+/// Return the first register of class \p RegClass that is not in \p Regs.
+unsigned ARMLoadStoreOpt::findFreeReg(const TargetRegisterClass &RegClass) {
+  if (!RegClassInfoValid) {
+    RegClassInfo.runOnMachineFunction(*MF);
+    RegClassInfoValid = true;
+  }
+
+  for (unsigned Reg : RegClassInfo.getOrder(&RegClass))
+    if (!LiveRegs.contains(Reg))
+      return Reg;
+  return 0;
+}
+
+/// Compute live registers just before instruction \p Before (in normal schedule
+/// direction). Computes backwards so multiple queries in the same block must
+/// come in reverse order.
+void ARMLoadStoreOpt::moveLiveRegsBefore(const MachineBasicBlock &MBB,
+    MachineBasicBlock::const_iterator Before) {
+  // Initialize if we never queried in this block.
+  if (!LiveRegsValid) {
+    LiveRegs.init(TRI);
+    LiveRegs.addLiveOuts(&MBB, true);
+    LiveRegPos = MBB.end();
+    LiveRegsValid = true;
+  }
+  // Move backward just before the "Before" position.
+  while (LiveRegPos != Before) {
+    --LiveRegPos;
+    LiveRegs.stepBackward(*LiveRegPos);
+  }
+}
+
+static bool ContainsReg(const ArrayRef<std::pair<unsigned, bool>> &Regs,
+                        unsigned Reg) {
+  for (const std::pair<unsigned, bool> &R : Regs)
+    if (R.first == Reg)
+      return true;
+  return false;
+}
+
 /// Create and insert a LDM or STM with Base as base register and registers in
 /// Regs as the register operands that would be loaded / stored.  It returns
 /// true if the transformation is done.
-bool
+MachineInstr *
 ARMLoadStoreOpt::MergeOps(MachineBasicBlock &MBB,
-                          MachineBasicBlock::iterator MBBI,
-                          int Offset, unsigned Base, bool BaseKill,
-                          unsigned Opcode, ARMCC::CondCodes Pred,
-                          unsigned PredReg, unsigned Scratch, DebugLoc dl,
-                          ArrayRef<std::pair<unsigned, bool> > Regs,
-                          ArrayRef<unsigned> ImpDefs) {
-  // Only a single register to load / store. Don't bother.
+                          MachineBasicBlock::iterator InsertBefore, int Offset,
+                          unsigned Base, bool BaseKill, unsigned Opcode,
+                          ARMCC::CondCodes Pred, unsigned PredReg, DebugLoc DL,
+                          ArrayRef<std::pair<unsigned, bool>> Regs) {
   unsigned NumRegs = Regs.size();
-  if (NumRegs <= 1)
-    return false;
+  assert(NumRegs > 1);
 
   // For Thumb1 targets, it might be necessary to clobber the CPSR to merge.
   // Compute liveness information for that register to make the decision.
   bool SafeToClobberCPSR = !isThumb1 ||
-    (MBB.computeRegisterLiveness(TRI, ARM::CPSR, std::prev(MBBI), 15) ==
+    (MBB.computeRegisterLiveness(TRI, ARM::CPSR, InsertBefore, 20) ==
      MachineBasicBlock::LQR_Dead);
 
   bool Writeback = isThumb1; // Thumb1 LDM/STM have base reg writeback.
 
   // Exception: If the base register is in the input reglist, Thumb1 LDM is
   // non-writeback.
   // It's also not possible to merge an STR of the base register in Thumb1.
-  if (isThumb1)
-    for (const std::pair<unsigned, bool> &R : Regs)
-      if (Base == R.first) {
-        assert(Base != ARM::SP && "Thumb1 does not allow SP in register list");
-        if (Opcode == ARM::tLDRi) {
-          Writeback = false;
-          break;
-        } else if (Opcode == ARM::tSTRi) {
-          return false;
-        }
-      }
+  if (isThumb1 && isi32Load(Opcode) && ContainsReg(Regs, Base)) {
+      return nullptr;
 
   ARM_AM::AMSubMode Mode = ARM_AM::ia;
   // VFP and Thumb2 do not support IB or DA modes. Thumb1 only supports IA.
   bool isNotVFP = isi32Load(Opcode) || isi32Store(Opcode);
   bool haveIBAndDA = isNotVFP && !isThumb2 && !isThumb1;
 
   if (Offset == 4 && haveIBAndDA) {
     Mode = ARM_AM::ib;
   } else if (Offset == -4 * (int)NumRegs + 4 && haveIBAndDA) {
     Mode = ARM_AM::da;
   } else if (Offset == -4 * (int)NumRegs && isNotVFP && !isThumb1) {
     // VLDM/VSTM do not support DB mode without also updating the base reg.
     Mode = ARM_AM::db;
   } else if (Offset != 0 || Opcode == ARM::tLDRspi || Opcode == ARM::tSTRspi) {
     // Check if this is a supported opcode before inserting instructions to
     // calculate a new base register.
-    if (!getLoadStoreMultipleOpcode(Opcode, Mode)) return false;
+    if (!getLoadStoreMultipleOpcode(Opcode, Mode)) return nullptr;
 
     // If starting offset isn't zero, insert a MI to materialize a new base.
     // But only do so if it is cost effective, i.e. merging more than two
     // loads / stores.
     if (NumRegs <= 2)
-      return false;
+      return nullptr;
 
     // On Thumb1, it's not worth materializing a new base register without
     // clobbering the CPSR (i.e. not using ADDS/SUBS).
     if (!SafeToClobberCPSR)
-      return false;
+      return nullptr;
 
     unsigned NewBase;
     if (isi32Load(Opcode)) {
       // If it is a load, then just use one of the destination register to
       // use as the new base.
       NewBase = Regs[NumRegs-1].first;
     } else {
-      // Use the scratch register to use as a new base.
-      NewBase = Scratch;
+      // Find a free register that we can use as scratch register.
+      moveLiveRegsBefore(MBB, InsertBefore);
+      // The merged instruction does not exist yet but will use several Regs if
+      // it is a Store.
+      if (!isLoad(Opcode))
+        for (const std::pair<unsigned, bool> &R : Regs)
+          LiveRegs.addReg(R.first);
+
+      NewBase = findFreeReg(isThumb1 ? ARM::tGPRRegClass : ARM::GPRRegClass);
       if (NewBase == 0)
-        return false;
+        return nullptr;
     }
 
     int BaseOpc =
       isThumb2 ? ARM::t2ADDri :
       (isThumb1 && Base == ARM::SP) ? ARM::tADDrSPi :
       (isThumb1 && Offset < 8) ? ARM::tADDi3 :
       isThumb1 ? ARM::tADDi8  : ARM::ADDri;
 
     if (Offset < 0) {
       Offset = - Offset;
       BaseOpc =
         isThumb2 ? ARM::t2SUBri :
         (isThumb1 && Offset < 8 && Base != ARM::SP) ? ARM::tSUBi3 :
         isThumb1 ? ARM::tSUBi8  : ARM::SUBri;
     }
 
     if (!TL->isLegalAddImmediate(Offset))
       // FIXME: Try add with register operand?
-      return false; // Probably not worth it then.
+      return nullptr; // Probably not worth it then.
 
     if (isThumb1) {
       // Thumb1: depending on immediate size, use either
       //   ADDS NewBase, Base, #imm3
       // or
       //   MOV  NewBase, Base
       //   ADDS NewBase, #imm8.
       if (Base != NewBase &&
           (BaseOpc == ARM::tADDi8 || BaseOpc == ARM::tSUBi8)) {
         // Need to insert a MOV to the new base first.
         if (isARMLowRegister(NewBase) && isARMLowRegister(Base) &&
             !STI->hasV6Ops()) {
           // thumbv4t doesn't have lo->lo copies, and we can't predicate tMOVSr
           if (Pred != ARMCC::AL)
-            return false;
-          BuildMI(MBB, MBBI, dl, TII->get(ARM::tMOVSr), NewBase)
+            return nullptr;
+          BuildMI(MBB, InsertBefore, DL, TII->get(ARM::tMOVSr), NewBase)
             .addReg(Base, getKillRegState(BaseKill));
         } else
-          BuildMI(MBB, MBBI, dl, TII->get(ARM::tMOVr), NewBase)
+          BuildMI(MBB, InsertBefore, DL, TII->get(ARM::tMOVr), NewBase)
             .addReg(Base, getKillRegState(BaseKill))
             .addImm(Pred).addReg(PredReg);
 
         // Set up BaseKill and Base correctly to insert the ADDS/SUBS below.
         Base = NewBase;
         BaseKill = false;
       }
       if (BaseOpc == ARM::tADDrSPi) {
         assert(Offset % 4 == 0 && "tADDrSPi offset is scaled by 4");
-        BuildMI(MBB, MBBI, dl, TII->get(BaseOpc), NewBase)
+        BuildMI(MBB, InsertBefore, DL, TII->get(BaseOpc), NewBase)
           .addReg(Base, getKillRegState(BaseKill)).addImm(Offset/4)
           .addImm(Pred).addReg(PredReg);
       } else
-        AddDefaultT1CC(BuildMI(MBB, MBBI, dl, TII->get(BaseOpc), NewBase), true)
+        AddDefaultT1CC(
+          BuildMI(MBB, InsertBefore, DL, TII->get(BaseOpc), NewBase), true)
           .addReg(Base, getKillRegState(BaseKill)).addImm(Offset)
           .addImm(Pred).addReg(PredReg);
     } else {
-      BuildMI(MBB, MBBI, dl, TII->get(BaseOpc), NewBase)
+      BuildMI(MBB, InsertBefore, DL, TII->get(BaseOpc), NewBase)
         .addReg(Base, getKillRegState(BaseKill)).addImm(Offset)
         .addImm(Pred).addReg(PredReg).addReg(0);
     }
     Base = NewBase;
     BaseKill = true; // New base is always killed straight away.
   }
 
-  bool isDef = (isi32Load(Opcode) || Opcode == ARM::VLDRS ||
-                Opcode == ARM::VLDRD);
+  bool isDef = isLoad(Opcode);
 
   // Get LS multiple opcode. Note that for Thumb1 this might be an opcode with
   // base register writeback.
   Opcode = getLoadStoreMultipleOpcode(Opcode, Mode);
-  if (!Opcode) return false;
+  if (!Opcode) return nullptr;
 
   // Check if a Thumb1 LDM/STM merge is safe. This is the case if:
   // - There is no writeback (LDM of base register),
   // - the base register is killed by the merged instruction,
   // - or it's safe to overwrite the condition flags, i.e. to insert a SUBS
   //   to reset the base register.
   // Otherwise, don't merge.
   // It's safe to return here since the code to materialize a new base register
   // above is also conditional on SafeToClobberCPSR.
   if (isThumb1 && !SafeToClobberCPSR && Writeback && !BaseKill)
-    return false;
+    return nullptr;
 
   MachineInstrBuilder MIB;
 
   if (Writeback) {
     if (Opcode == ARM::tLDMIA)
       // Update tLDMIA with writeback if necessary.
       Opcode = ARM::tLDMIA_UPD;
 
-    MIB = BuildMI(MBB, MBBI, dl, TII->get(Opcode));
+    MIB = BuildMI(MBB, InsertBefore, DL, TII->get(Opcode));
 
     // Thumb1: we might need to set base writeback when building the MI.
     MIB.addReg(Base, getDefRegState(true))
        .addReg(Base, getKillRegState(BaseKill));
 
     // The base isn't dead after a merged instruction with writeback.
     // Insert a sub instruction after the newly formed instruction to reset.
     if (!BaseKill)
-      UpdateBaseRegUses(MBB, MBBI, dl, Base, NumRegs, Pred, PredReg);
+      UpdateBaseRegUses(MBB, InsertBefore, DL, Base, NumRegs, Pred, PredReg);
 
   } else {
     // No writeback, simply build the MachineInstr.
-    MIB = BuildMI(MBB, MBBI, dl, TII->get(Opcode));
+    MIB = BuildMI(MBB, InsertBefore, DL, TII->get(Opcode));
     MIB.addReg(Base, getKillRegState(BaseKill));
   }
 
   MIB.addImm(Pred).addReg(PredReg);
 
   for (const std::pair<unsigned, bool> &R : Regs)
-    MIB = MIB.addReg(R.first, getDefRegState(isDef)
-                     | getKillRegState(R.second));
+    MIB.addReg(R.first, getDefRegState(isDef) | getKillRegState(R.second));
 
-  // Add implicit defs for super-registers.
-  for (unsigned ImpDef : ImpDefs)
-    MIB.addReg(ImpDef, RegState::ImplicitDefine);
-
-  return true;
+  return MIB.getInstr();
 }
 
-/// Find all instructions using a given imp-def within a range.
-///
-/// We are trying to combine a range of instructions, one of which (located at
-/// position RangeBegin) implicitly defines a register. The final LDM/STM will
-/// be placed at RangeEnd, and so any uses of this definition between RangeStart
-/// and RangeEnd must be modified to use an undefined value.
-///
-/// The live range continues until we find a second definition or one of the
-/// uses we find is a kill. Unfortunately MemOps is not sorted by Position, so
-/// we must consider all uses and decide which are relevant in a second pass.
-void ARMLoadStoreOpt::findUsesOfImpDef(
-    SmallVectorImpl<MachineOperand *> &UsesOfImpDefs, const MemOpQueue &MemOps,
-    unsigned DefReg, unsigned RangeBegin, unsigned RangeEnd) {
-  std::map<unsigned, MachineOperand *> Uses;
-  unsigned LastLivePos = RangeEnd;
-
-  // First we find all uses of this register with Position between RangeBegin
-  // and RangeEnd, any or all of these could be uses of a definition at
-  // RangeBegin. We also record the latest position a definition at RangeBegin
-  // would be considered live.
-  for (unsigned i = 0; i < MemOps.size(); ++i) {
-    MachineInstr &MI = *MemOps[i].MBBI;
-    unsigned MIPosition = MemOps[i].Position;
-    if (MIPosition <= RangeBegin || MIPosition > RangeEnd)
-      continue;
-
-    // If this instruction defines the register, then any later use will be of
-    // that definition rather than ours.
-    if (MI.definesRegister(DefReg))
-      LastLivePos = std::min(LastLivePos, MIPosition);
+/// Call MergeOps and update MemOps and merges accordingly on success.
+MachineInstr *ARMLoadStoreOpt::MergeOpsUpdate(const MergeCandidate &Cand) {
+  const MachineInstr *First = Cand.Instrs.front();
+  unsigned Opcode = First->getOpcode();
+  bool IsLoad = isLoad(Opcode);
+  SmallVector<std::pair<unsigned, bool>, 8> Regs;
+  SmallVector<unsigned, 4> ImpDefs;
+  DenseSet<unsigned> KilledRegs;
+  // Determine list of registers and list of implicit super-register defs.
+  for (const MachineInstr *MI : Cand.Instrs) {
+    const MachineOperand &MO = getLoadStoreRegOp(*MI);
+    unsigned Reg = MO.getReg();
+    bool IsKill = MO.isKill();
+    if (IsKill)
+      KilledRegs.insert(Reg);
+    Regs.push_back(std::make_pair(Reg, IsKill));
 
-    MachineOperand *UseOp = MI.findRegisterUseOperand(DefReg);
-    if (!UseOp)
+    if (IsLoad) {
+      // Collect any implicit defs of super-registers, after merging we can't
+      // be sure anymore that we properly preserved these live ranges and must
+      // removed these implicit operands.
+      for (const MachineOperand &MO : MI->implicit_operands()) {
+        if (!MO.isReg() || !MO.isDef() || MO.isDead())
           continue;
+        assert(MO.isImplicit());
+        unsigned DefReg = MO.getReg();
 
-    // If this instruction kills the register then (assuming liveness is
-    // correct when we start) we don't need to think about anything after here.
-    if (UseOp->isKill())
-      LastLivePos = std::min(LastLivePos, MIPosition);
-
-    Uses[MIPosition] = UseOp;
+        if (std::find(ImpDefs.begin(), ImpDefs.end(), DefReg) != ImpDefs.end())
+          continue;
+        // We can ignore cases where the super-reg is read and written.
+        if (MI->readsRegister(DefReg))
+          continue;
+        ImpDefs.push_back(DefReg);
       }
-
-  // Now we traverse the list of all uses, and append the ones that actually use
-  // our definition to the requested list.
-  for (std::map<unsigned, MachineOperand *>::iterator I = Uses.begin(),
-                                                      E = Uses.end();
-       I != E; ++I) {
-    // List is sorted by position so once we've found one out of range there
-    // will be no more to consider.
-    if (I->first > LastLivePos)
-      break;
-    UsesOfImpDefs.push_back(I->second);
     }
   }
 
-/// Call MergeOps and update MemOps and merges accordingly on success.
-void ARMLoadStoreOpt::MergeOpsUpdate(MachineBasicBlock &MBB,
-                                     MemOpQueue &memOps,
-                                     unsigned memOpsBegin, unsigned memOpsEnd,
-                                     unsigned insertAfter, int Offset,
-                                     unsigned Base, bool BaseKill,
-                                     unsigned Opcode,
-                                     ARMCC::CondCodes Pred, unsigned PredReg,
-                                     unsigned Scratch,
-                                     DebugLoc dl,
-                         SmallVectorImpl<MachineBasicBlock::iterator> &Merges) {
-  // First calculate which of the registers should be killed by the merged
-  // instruction.
-  const unsigned insertPos = memOps[insertAfter].Position;
-  SmallSet<unsigned, 4> KilledRegs;
-  DenseMap<unsigned, unsigned> Killer;
-  for (unsigned i = 0, e = memOps.size(); i != e; ++i) {
-    if (i == memOpsBegin) {
-      i = memOpsEnd;
-      if (i == e)
-        break;
+  // Attempt the merge.
+  typedef MachineBasicBlock::iterator iterator;
+  MachineInstr *LatestMI = Cand.Instrs[Cand.LatestMIIdx];
+  iterator InsertBefore = std::next(iterator(LatestMI));
+  MachineBasicBlock &MBB = *LatestMI->getParent();
+  unsigned Offset = getMemoryOpOffset(First);
+  unsigned Base = getLoadStoreBaseOp(*First).getReg();
+  bool BaseKill = LatestMI->killsRegister(Base);
+  unsigned PredReg = 0;
+  ARMCC::CondCodes Pred = getInstrPredicate(First, PredReg);
+  DebugLoc DL = First->getDebugLoc();
+  MachineInstr *Merged = MergeOps(MBB, InsertBefore, Offset, Base, BaseKill,
+                                  Opcode, Pred, PredReg, DL, Regs);
+  if (!Merged)
+    return nullptr;
+
+  // Determine earliest instruction that will get removed. We then keep an
+  // iterator just above it so the following erases don't invalidated it.
+  iterator EarliestI(Cand.Instrs[Cand.EarliestMIIdx]);
+  bool EarliestAtBegin = false;
+  if (EarliestI == MBB.begin()) {
+    EarliestAtBegin = true;
+  } else {
+    EarliestI = std::prev(EarliestI);
+  }
+
+  // Remove instructions which have been merged.
+  for (MachineInstr *MI : Cand.Instrs)
+    MBB.erase(MI);
+
+  // Determine range between the earliest removed instruction and the new one.
+  if (EarliestAtBegin)
+    EarliestI = MBB.begin();
+  else
+    EarliestI = std::next(EarliestI);
+  auto FixupRange = make_range(EarliestI, iterator(Merged));
+
+  if (isLoad(Opcode)) {
+    // If the previous loads defined a super-reg, then we have to mark earlier
+    // operands undef; Replicate the super-reg def on the merged instruction.
+    for (MachineInstr &MI : FixupRange) {
+      for (unsigned &ImpDefReg : ImpDefs) {
+        for (MachineOperand &MO : MI.implicit_operands()) {
+          if (!MO.isReg() || MO.getReg() != ImpDefReg)
+            continue;
+          if (MO.readsReg())
+            MO.setIsUndef();
+          else if (MO.isDef())
+            ImpDefReg = 0;
         }
-    if (memOps[i].Position < insertPos && memOps[i].isKill) {
-      unsigned Reg = memOps[i].Reg;
-      KilledRegs.insert(Reg);
-      Killer[Reg] = i;
       }
     }
 
-  SmallVector<std::pair<unsigned, bool>, 8> Regs;
-  SmallVector<unsigned, 8> ImpDefs;
-  SmallVector<MachineOperand *, 8> UsesOfImpDefs;
-  for (unsigned i = memOpsBegin; i < memOpsEnd; ++i) {
-    unsigned Reg = memOps[i].Reg;
-    // If we are inserting the merged operation after an operation that
-    // uses the same register, make sure to transfer any kill flag.
-    bool isKill = memOps[i].isKill || KilledRegs.count(Reg);
-    Regs.push_back(std::make_pair(Reg, isKill));
-
-    // Collect any implicit defs of super-registers. They must be preserved.
-    for (const MachineOperand &MO : memOps[i].MBBI->operands()) {
-      if (!MO.isReg() || !MO.isDef() || !MO.isImplicit() || MO.isDead())
+    MachineInstrBuilder MIB(*Merged->getParent()->getParent(), Merged);
+    for (unsigned ImpDef : ImpDefs)
+      MIB.addReg(ImpDef, RegState::ImplicitDefine);
+  } else {
+    // Remove kill flags: We are possibly storing the values later now.
+    assert(isi32Store(Opcode) || Opcode == ARM::VSTRS || Opcode == ARM::VSTRD);
+    for (MachineInstr &MI : FixupRange) {
+      for (MachineOperand &MO : MI.uses()) {
+        if (!MO.isReg() || !MO.isKill())
           continue;
-      unsigned DefReg = MO.getReg();
-      if (std::find(ImpDefs.begin(), ImpDefs.end(), DefReg) == ImpDefs.end())
-        ImpDefs.push_back(DefReg);
-
-      // There may be other uses of the definition between this instruction and
-      // the eventual LDM/STM position. These should be marked undef if the
-      // merge takes place.
-      findUsesOfImpDef(UsesOfImpDefs, memOps, DefReg, memOps[i].Position,
-                       insertPos);
+        if (KilledRegs.count(MO.getReg()))
+          MO.setIsKill(false);
       }
     }
-
-  // Try to do the merge.
-  MachineBasicBlock::iterator Loc = memOps[insertAfter].MBBI;
-  ++Loc;
-  if (!MergeOps(MBB, Loc, Offset, Base, BaseKill, Opcode,
-                Pred, PredReg, Scratch, dl, Regs, ImpDefs))
-    return;
-
-  // Merge succeeded, update records.
-  Merges.push_back(std::prev(Loc));
-
-  // In gathering loads together, we may have moved the imp-def of a register
-  // past one of its uses. This is OK, since we know better than the rest of
-  // LLVM what's OK with ARM loads and stores; but we still have to adjust the
-  // affected uses.
-  for (SmallVectorImpl<MachineOperand *>::iterator I = UsesOfImpDefs.begin(),
-                                                   E = UsesOfImpDefs.end();
-                                                   I != E; ++I)
-    (*I)->setIsUndef();
-
-  for (unsigned i = memOpsBegin; i < memOpsEnd; ++i) {
-    // Remove kill flags from any memops that come before insertPos.
-    if (Regs[i-memOpsBegin].second) {
-      unsigned Reg = Regs[i-memOpsBegin].first;
-      if (KilledRegs.count(Reg)) {
-        unsigned j = Killer[Reg];
-        int Idx = memOps[j].MBBI->findRegisterUseOperandIdx(Reg, true);
-        assert(Idx >= 0 && "Cannot find killing operand");
-        memOps[j].MBBI->getOperand(Idx).setIsKill(false);
-        memOps[j].isKill = false;
-      }
-      memOps[i].isKill = true;
-    }
-    MBB.erase(memOps[i].MBBI);
-    // Update this memop to refer to the merged instruction.
-    // We may need to move kill flags again.
-    memOps[i].Merged = true;
-    memOps[i].MBBI = Merges.back();
-    memOps[i].Position = insertPos;
-  }
-
-  // Update memOps offsets, since they may have been modified by MergeOps.
-  for (auto &MemOp : memOps) {
-    MemOp.Offset = getMemoryOpOffset(MemOp.MBBI);
+    assert(ImpDefs.empty());
   }
+
+  return Merged;
 }
 
-/// Merge a number of load / store instructions into one or more load / store
-/// multiple instructions.
-void
-ARMLoadStoreOpt::MergeLDR_STR(MachineBasicBlock &MBB, unsigned SIndex,
-                         unsigned Base, unsigned Opcode, unsigned Size,
-                         ARMCC::CondCodes Pred, unsigned PredReg,
-                         unsigned Scratch, MemOpQueue &MemOps,
-                         SmallVectorImpl<MachineBasicBlock::iterator> &Merges) {
+/// Find candidates for load/store multiple merge in list of MemOpQueueEntries.
+void ARMLoadStoreOpt::FormCandidates(const MemOpQueue &MemOps) {
+  const MachineInstr *FirstMI = MemOps[0].MI;
+  unsigned Opcode = FirstMI->getOpcode();
   bool isNotVFP = isi32Load(Opcode) || isi32Store(Opcode);
-  int Offset = MemOps[SIndex].Offset;
-  int SOffset = Offset;
-  unsigned insertAfter = SIndex;
-  MachineBasicBlock::iterator Loc = MemOps[SIndex].MBBI;
-  DebugLoc dl = Loc->getDebugLoc();
-  const MachineOperand &PMO = Loc->getOperand(0);
-  unsigned PReg = PMO.getReg();
-  unsigned PRegNum = PMO.isUndef() ? UINT_MAX : TRI->getEncodingValue(PReg);
-  unsigned Count = 1;
-  unsigned Limit = ~0U;
-  bool BaseKill = false;
+  unsigned Size = getLSMultipleTransferSize(FirstMI);
   // vldm / vstm limit are 32 for S variants, 16 for D variants.
-
+  unsigned Limit;
   switch (Opcode) {
-  default: break;
+  default:
+    Limit = UINT_MAX;
+    break;
   case ARM::VSTRS:
     Limit = 32;
     break;
   case ARM::VSTRD:
     Limit = 16;
     break;
   case ARM::VLDRD:
     Limit = 16;
     break;
   case ARM::VLDRS:
     Limit = 32;
     break;
   }
 
-  for (unsigned i = SIndex+1, e = MemOps.size(); i != e; ++i) {
-    int NewOffset = MemOps[i].Offset;
-    const MachineOperand &MO = MemOps[i].MBBI->getOperand(0);
+  unsigned SIndex = 0;
+  unsigned EIndex = MemOps.size();
+  do {
+    // Look at the first instruction.
+    const MachineInstr *MI = MemOps[SIndex].MI;
+    int Offset = MemOps[SIndex].Offset;
+    const MachineOperand &PMO = getLoadStoreRegOp(*MI);
+    unsigned PReg = PMO.getReg();
+    unsigned PRegNum = PMO.isUndef() ? UINT_MAX : TRI->getEncodingValue(PReg);
+    unsigned Latest = SIndex;
+    unsigned Earliest = SIndex;
+    unsigned Count = 1;
+
+    // Merge additional instructions fulfilling LDM/STM constraints.
+    for (unsigned I = SIndex+1;;) {
+      if (I < EIndex) {
+        int NewOffset = MemOps[I].Offset;
+        const MachineOperand &MO = getLoadStoreRegOp(*MemOps[I].MI);
         unsigned Reg = MO.getReg();
         unsigned RegNum = MO.isUndef() ? UINT_MAX : TRI->getEncodingValue(Reg);
         // Register numbers must be in ascending order. For VFP / NEON load and
-    // store multiples, the registers must also be consecutive and within the
-    // limit on the number of registers per instruction.
+        // store multiples, the registers must also be consecutive and within
+        // the limit on the number of registers per instruction.
         if (Reg != ARM::SP &&
             NewOffset == Offset + (int)Size &&
             ((isNotVFP && RegNum > PRegNum) ||
              ((Count < Limit) && RegNum == PRegNum+1)) &&
             // On Swift we don't want vldm/vstm to start with a odd register num
             // because Q register unaligned vldm/vstm need more uops.
             (!STI->isSwift() || isNotVFP || Count != 1 || !(PRegNum & 0x1))) {
+          // Track MemOp with latest and earliest position (Positions are
+          // counted in reverse).
+          unsigned Position = MemOps[I].Position;
+          if (Position < MemOps[Latest].Position)
+            Latest = I;
+          else if (Position > MemOps[Earliest].Position)
+            Earliest = I;
+          // Prepare for next MemOp.
           Offset += Size;
           PRegNum = RegNum;
           ++Count;
-    } else {
-      // Can't merge this in. Try merge the earlier ones first.
-      // We need to compute BaseKill here because the MemOps may have been
-      // reordered.
-      BaseKill = Loc->killsRegister(Base);
-
-      MergeOpsUpdate(MBB, MemOps, SIndex, i, insertAfter, SOffset, Base,
-                     BaseKill, Opcode, Pred, PredReg, Scratch, dl, Merges);
-      MergeLDR_STR(MBB, i, Base, Opcode, Size, Pred, PredReg, Scratch,
-                   MemOps, Merges);
-      return;
-    }
-
-    if (MemOps[i].Position > MemOps[insertAfter].Position) {
-      insertAfter = i;
-      Loc = MemOps[i].MBBI;
+          ++I;
+          continue;
         }
       }
 
-  BaseKill =  Loc->killsRegister(Base);
-  MergeOpsUpdate(MBB, MemOps, SIndex, MemOps.size(), insertAfter, SOffset,
-                 Base, BaseKill, Opcode, Pred, PredReg, Scratch, dl, Merges);
+      // Can't merge this in. Form a candidate from the Ops collected so far.
+      MergeCandidate *Candidate = new(Allocator) MergeCandidate;
+      for (unsigned C = SIndex, CE = SIndex + Count; C < CE; ++C)
+        Candidate->Instrs.push_back(MemOps[C].MI);
+      Candidate->LatestMIIdx = Latest - SIndex;
+      Candidate->EarliestMIIdx = Earliest - SIndex;
+      Candidate->InsertPos = MemOps[Latest].Position;
+      Candidates.push_back(Candidate);
+      // Restart Chain Building.
+      SIndex = I;
+      break;
+    }
+  } while (SIndex < EIndex);
 }
 
 static bool isMatchingDecrement(MachineInstr *MI, unsigned Base,
                                 unsigned Bytes, unsigned Limit,
                                 ARMCC::CondCodes Pred, unsigned PredReg) {
   unsigned MyPredReg = 0;
   if (!MI)
     return false;
if (!(MI->getOperand(0).getReg() == Base &&
         (MI->getOperand(2).getImm() * Scale) == Bytes &&
         getInstrPredicate(MI, MyPredReg) == Pred &&
         MyPredReg == PredReg))
     return false;
 
   return CheckCPSRDef ? !definesCPSR(MI) : true;
 }
 
-static inline unsigned getLSMultipleTransferSize(MachineInstr *MI) {
-  switch (MI->getOpcode()) {
-  default: return 0;
-  case ARM::LDRi12:
-  case ARM::STRi12:
-  case ARM::tLDRi:
-  case ARM::tSTRi:
-  case ARM::tLDRspi:
-  case ARM::tSTRspi:
-  case ARM::t2LDRi8:
-  case ARM::t2LDRi12:
-  case ARM::t2STRi8:
-  case ARM::t2STRi12:
-  case ARM::VLDRS:
-  case ARM::VSTRS:
-    return 4;
-  case ARM::VLDRD:
-  case ARM::VSTRD:
-    return 8;
-  case ARM::LDMIA:
-  case ARM::LDMDA:
-  case ARM::LDMDB:
-  case ARM::LDMIB:
-  case ARM::STMIA:
-  case ARM::STMDA:
-  case ARM::STMDB:
-  case ARM::STMIB:
-  case ARM::tLDMIA:
-  case ARM::tLDMIA_UPD:
-  case ARM::tSTMIA_UPD:
-  case ARM::t2LDMIA:
-  case ARM::t2LDMDB:
-  case ARM::t2STMIA:
-  case ARM::t2STMDB:
-  case ARM::VLDMSIA:
-  case ARM::VSTMSIA:
-    return (MI->getNumOperands() - MI->getDesc().getNumOperands() + 1) * 4;
-  case ARM::VLDMDIA:
-  case ARM::VSTMDIA:
-    return (MI->getNumOperands() - MI->getDesc().getNumOperands() + 1) * 8;
-  }
-}
-
 static unsigned getUpdatingLSMultipleOpcode(unsigned Opc,
                                             ARM_AM::AMSubMode Mode) {
   switch (Opc) {
   default: llvm_unreachable("Unhandled opcode!");
   case ARM::LDMIA:
   case ARM::LDMDA:
   case ARM::LDMDB:
   case ARM::LDMIB:

 /// rn := rn + 4 * 3;
 /// =>
 /// stmia rn!, <ra, rb, rc>
 ///
 /// rn := rn - 4 * 3;
 /// ldmia rn, <ra, rb, rc>
 /// =>
 /// ldmdb rn!, <ra, rb, rc>
-bool ARMLoadStoreOpt::MergeBaseUpdateLSMultiple(MachineBasicBlock &MBB,
-                                               MachineBasicBlock::iterator MBBI,
-                                               bool &Advance,
-                                               MachineBasicBlock::iterator &I) {
+bool ARMLoadStoreOpt::MergeBaseUpdateLSMultiple(MachineInstr *MI) {
   // Thumb1 is already using updating loads/stores.
   if (isThumb1) return false;
 
-  MachineInstr *MI = MBBI;
-  unsigned Base = MI->getOperand(0).getReg();
-  bool BaseKill = MI->getOperand(0).isKill();
+  const MachineOperand &BaseOP = MI->getOperand(0);
+  unsigned Base = BaseOP.getReg();
+  bool BaseKill = BaseOP.isKill();
   unsigned Bytes = getLSMultipleTransferSize(MI);
   unsigned PredReg = 0;
   ARMCC::CondCodes Pred = getInstrPredicate(MI, PredReg);
   unsigned Opcode = MI->getOpcode();
-  DebugLoc dl = MI->getDebugLoc();
+  DebugLoc DL = MI->getDebugLoc();
 
   // Can't use an updating ld/st if the base register is also a dest
   // register. e.g. ldmdb r0!, {r0, r1, r2}. The behavior is undefined.
   for (unsigned i = 2, e = MI->getNumOperands(); i != e; ++i)
     if (MI->getOperand(i).getReg() == Base)
       return false;
 
   bool DoMerge = false;
   ARM_AM::AMSubMode Mode = getLoadStoreMultipleSubMode(Opcode);
 
   // Try merging with the previous instruction.
+  MachineBasicBlock &MBB = *MI->getParent();
   MachineBasicBlock::iterator BeginMBBI = MBB.begin();
+  MachineBasicBlock::iterator MBBI(MI);
   if (MBBI != BeginMBBI) {
     MachineBasicBlock::iterator PrevMBBI = std::prev(MBBI);
     while (PrevMBBI != BeginMBBI && PrevMBBI->isDebugValue())
       --PrevMBBI;
     if (Mode == ARM_AM::ia &&
         isMatchingDecrement(PrevMBBI, Base, Bytes, 0, Pred, PredReg)) {
       Mode = ARM_AM::db;
       DoMerge = true;
while (NextMBBI != EndMBBI && NextMBBI->isDebugValue())
       ++NextMBBI;
     if ((Mode == ARM_AM::ia || Mode == ARM_AM::ib) &&
         isMatchingIncrement(NextMBBI, Base, Bytes, 0, Pred, PredReg)) {
       DoMerge = true;
     } else if ((Mode == ARM_AM::da || Mode == ARM_AM::db) &&
                isMatchingDecrement(NextMBBI, Base, Bytes, 0, Pred, PredReg)) {
       DoMerge = true;
     }
-    if (DoMerge) {
-      if (NextMBBI == I) {
-        Advance = true;
-        ++I;
-      }
+    if (DoMerge)
       MBB.erase(NextMBBI);
-    }
-  }
 
   if (!DoMerge)
     return false;
 
   unsigned NewOpc = getUpdatingLSMultipleOpcode(Opcode, Mode);
-  MachineInstrBuilder MIB = BuildMI(MBB, MBBI, dl, TII->get(NewOpc))
+  MachineInstrBuilder MIB = BuildMI(MBB, MBBI, DL, TII->get(NewOpc))
     .addReg(Base, getDefRegState(true)) // WB base register
     .addReg(Base, getKillRegState(BaseKill))
     .addImm(Pred).addReg(PredReg);
 
   // Transfer the rest of operands.
   for (unsigned OpNum = 3, e = MI->getNumOperands(); OpNum != e; ++OpNum)
     MIB.addOperand(MI->getOperand(OpNum));
 
static unsigned getPostIndexedLoadStoreOpcode(unsigned Opc,
   case ARM::t2STRi12:
     return ARM::t2STR_POST;
   default: llvm_unreachable("Unhandled opcode!");
   }
 }
 
 /// Fold proceeding/trailing inc/dec of base register into the
 /// LDR/STR/FLD{D|S}/FST{D|S} op when possible:
-bool ARMLoadStoreOpt::MergeBaseUpdateLoadStore(MachineBasicBlock &MBB,
-                                               MachineBasicBlock::iterator MBBI,
-                                               const TargetInstrInfo *TII,
-                                               bool &Advance,
-                                               MachineBasicBlock::iterator &I) {
+bool ARMLoadStoreOpt::MergeBaseUpdateLoadStore(MachineInstr *MI) {
   // Thumb1 doesn't have updating LDR/STR.
   // FIXME: Use LDM/STM with single register instead.
   if (isThumb1) return false;
 
-  MachineInstr *MI = MBBI;
-  unsigned Base = MI->getOperand(1).getReg();
-  bool BaseKill = MI->getOperand(1).isKill();
+  unsigned Base = getLoadStoreBaseOp(*MI).getReg();
+  bool BaseKill = getLoadStoreBaseOp(*MI).isKill();
   unsigned Bytes = getLSMultipleTransferSize(MI);
   unsigned Opcode = MI->getOpcode();
-  DebugLoc dl = MI->getDebugLoc();
+  DebugLoc DL = MI->getDebugLoc();
   bool isAM5 = (Opcode == ARM::VLDRD || Opcode == ARM::VLDRS ||
                 Opcode == ARM::VSTRD || Opcode == ARM::VSTRS);
   bool isAM2 = (Opcode == ARM::LDRi12 || Opcode == ARM::STRi12);
   if (isi32Load(Opcode) || isi32Store(Opcode))
     if (MI->getOperand(2).getImm() != 0)
       return false;
   if (isAM5 && ARM_AM::getAM5Offset(MI->getOperand(2).getImm()) != 0)
     return false;
 
-  bool isLd = isi32Load(Opcode) || Opcode == ARM::VLDRS || Opcode == ARM::VLDRD;
+  bool isLd = isLoad(Opcode);
   // Can't do the merge if the destination register is the same as the would-be
   // writeback register.
   if (MI->getOperand(0).getReg() == Base)
     return false;
 
   unsigned PredReg = 0;
   ARMCC::CondCodes Pred = getInstrPredicate(MI, PredReg);
   bool DoMerge = false;
   ARM_AM::AddrOpc AddSub = ARM_AM::add;
   unsigned NewOpc = 0;
   // AM2 - 12 bits, thumb2 - 8 bits.
   unsigned Limit = isAM5 ? 0 : (isAM2 ? 0x1000 : 0x100);
 
   // Try merging with the previous instruction.
+  MachineBasicBlock &MBB = *MI->getParent();
   MachineBasicBlock::iterator BeginMBBI = MBB.begin();
+  MachineBasicBlock::iterator MBBI(MI);
   if (MBBI != BeginMBBI) {
     MachineBasicBlock::iterator PrevMBBI = std::prev(MBBI);
     while (PrevMBBI != BeginMBBI && PrevMBBI->isDebugValue())
       --PrevMBBI;
     if (isMatchingDecrement(PrevMBBI, Base, Bytes, Limit, Pred, PredReg)) {
       DoMerge = true;
       AddSub = ARM_AM::sub;
     } else if (!isAM5 &&
if (!isAM5 &&
         isMatchingDecrement(NextMBBI, Base, Bytes, Limit, Pred, PredReg)) {
       DoMerge = true;
       AddSub = ARM_AM::sub;
     } else if (isMatchingIncrement(NextMBBI, Base, Bytes, Limit,Pred,PredReg)) {
       DoMerge = true;
     }
     if (DoMerge) {
       NewOpc = getPostIndexedLoadStoreOpcode(Opcode, AddSub);
-      if (NextMBBI == I) {
-        Advance = true;
-        ++I;
-      }
       MBB.erase(NextMBBI);
     }
   }
 
   if (!DoMerge)
     return false;
 
   if (isAM5) {
     // VLDM[SD]_UPD, VSTM[SD]_UPD
     // (There are no base-updating versions of VLDR/VSTR instructions, but the
     // updating load/store-multiple instructions can be used with only one
     // register.)
     MachineOperand &MO = MI->getOperand(0);
-    BuildMI(MBB, MBBI, dl, TII->get(NewOpc))
+    BuildMI(MBB, MBBI, DL, TII->get(NewOpc))
       .addReg(Base, getDefRegState(true)) // WB base register
       .addReg(Base, getKillRegState(isLd ? BaseKill : false))
       .addImm(Pred).addReg(PredReg)
       .addReg(MO.getReg(), (isLd ? getDefRegState(true) :
                             getKillRegState(MO.isKill())));
   } else if (isLd) {
     if (isAM2) {
       // LDR_PRE, LDR_POST
       if (NewOpc == ARM::LDR_PRE_IMM || NewOpc == ARM::LDRB_PRE_IMM) {
         int Offset = AddSub == ARM_AM::sub ? -Bytes : Bytes;
-        BuildMI(MBB, MBBI, dl, TII->get(NewOpc), MI->getOperand(0).getReg())
+        BuildMI(MBB, MBBI, DL, TII->get(NewOpc), MI->getOperand(0).getReg())
           .addReg(Base, RegState::Define)
           .addReg(Base).addImm(Offset).addImm(Pred).addReg(PredReg);
       } else {
         int Offset = ARM_AM::getAM2Opc(AddSub, Bytes, ARM_AM::no_shift);
-        BuildMI(MBB, MBBI, dl, TII->get(NewOpc), MI->getOperand(0).getReg())
+        BuildMI(MBB, MBBI, DL, TII->get(NewOpc), MI->getOperand(0).getReg())
           .addReg(Base, RegState::Define)
           .addReg(Base).addReg(0).addImm(Offset).addImm(Pred).addReg(PredReg);
       }
     } else {
       int Offset = AddSub == ARM_AM::sub ? -Bytes : Bytes;
       // t2LDR_PRE, t2LDR_POST
-      BuildMI(MBB, MBBI, dl, TII->get(NewOpc), MI->getOperand(0).getReg())
+      BuildMI(MBB, MBBI, DL, TII->get(NewOpc), MI->getOperand(0).getReg())
         .addReg(Base, RegState::Define)
         .addReg(Base).addImm(Offset).addImm(Pred).addReg(PredReg);
     }
   } else {
     MachineOperand &MO = MI->getOperand(0);
     // FIXME: post-indexed stores use am2offset_imm, which still encodes
     // the vestigal zero-reg offset register. When that's fixed, this clause
     // can be removed entirely.
     if (isAM2 && NewOpc == ARM::STR_POST_IMM) {
       int Offset = ARM_AM::getAM2Opc(AddSub, Bytes, ARM_AM::no_shift);
       // STR_PRE, STR_POST
-      BuildMI(MBB, MBBI, dl, TII->get(NewOpc), Base)
+      BuildMI(MBB, MBBI, DL, TII->get(NewOpc), Base)
         .addReg(MO.getReg(), getKillRegState(MO.isKill()))
         .addReg(Base).addReg(0).addImm(Offset).addImm(Pred).addReg(PredReg);
     } else {
       int Offset = AddSub == ARM_AM::sub ? -Bytes : Bytes;
       // t2STR_PRE, t2STR_POST
-      BuildMI(MBB, MBBI, dl, TII->get(NewOpc), Base)
+      BuildMI(MBB, MBBI, DL, TII->get(NewOpc), Base)
         .addReg(MO.getReg(), getKillRegState(MO.isKill()))
         .addReg(Base).addImm(Offset).addImm(Pred).addReg(PredReg);
     }
   }
   MBB.erase(MBBI);
 
   return true;
 }
static bool isMemoryOp(const MachineInstr *MI) {
   case ARM::t2LDRi12:
   case ARM::t2STRi8:
   case ARM::t2STRi12:
     return MI->getOperand(1).isReg();
   }
   return false;
 }
 
-/// Advance register scavenger to just before the earliest memory op that is
-/// being merged.
-void ARMLoadStoreOpt::AdvanceRS(MachineBasicBlock &MBB, MemOpQueue &MemOps) {
-  MachineBasicBlock::iterator Loc = MemOps[0].MBBI;
-  unsigned Position = MemOps[0].Position;
-  for (unsigned i = 1, e = MemOps.size(); i != e; ++i) {
-    if (MemOps[i].Position < Position) {
-      Position = MemOps[i].Position;
-      Loc = MemOps[i].MBBI;
-    }
-  }
-
-  if (Loc != MBB.begin())
-    RS->forward(std::prev(Loc));
-}
-
 static void InsertLDR_STR(MachineBasicBlock &MBB,
                           MachineBasicBlock::iterator &MBBI,
                           int Offset, bool isDef,
-                          DebugLoc dl, unsigned NewOpc,
+                          DebugLoc DL, unsigned NewOpc,
                           unsigned Reg, bool RegDeadKill, bool RegUndef,
                           unsigned BaseReg, bool BaseKill, bool BaseUndef,
                           bool OffKill, bool OffUndef,
                           ARMCC::CondCodes Pred, unsigned PredReg,
                           const TargetInstrInfo *TII, bool isT2) {
   if (isDef) {
     MachineInstrBuilder MIB = BuildMI(MBB, MBBI, MBBI->getDebugLoc(),
                                       TII->get(NewOpc))
bool ARMLoadStoreOpt::FixInvalidRegPairOp(MachineBasicBlock &MBB,
   // ARM LDRD/STRD needs consecutive registers.
   if (!ShouldBreakApart && (Opcode == ARM::LDRD || Opcode == ARM::STRD)
       && (EvenRegNum % 2 != 0 || EvenRegNum + 1 != OddRegNum))
     ShouldBreakApart = true;
 
   if (!ShouldBreakApart)
     return false;
 
-  MachineBasicBlock::iterator NewBBI = MBBI;
   bool isT2 = Opcode == ARM::t2LDRDi8 || Opcode == ARM::t2STRDi8;
   bool isLd = Opcode == ARM::LDRD || Opcode == ARM::t2LDRDi8;
   bool EvenDeadKill = isLd ?
     MI->getOperand(0).isDead() : MI->getOperand(0).isKill();
   bool EvenUndef = MI->getOperand(0).isUndef();
   bool OddDeadKill  = isLd ?
     MI->getOperand(1).isDead() : MI->getOperand(1).isKill();
   bool OddUndef = MI->getOperand(1).isUndef();
if (isLd) {
         .addReg(BaseReg, getKillRegState(BaseKill))
         .addImm(Pred).addReg(PredReg)
         .addReg(EvenReg,
                 getKillRegState(EvenDeadKill) | getUndefRegState(EvenUndef))
         .addReg(OddReg,
                 getKillRegState(OddDeadKill)  | getUndefRegState(OddUndef));
       ++NumSTRD2STM;
     }
-    NewBBI = std::prev(MBBI);
   } else {
     // Split into two instructions.
     unsigned NewOpc = (isLd)
       ? (isT2 ? (OffImm < 0 ? ARM::t2LDRi8 : ARM::t2LDRi12) : ARM::LDRi12)
       : (isT2 ? (OffImm < 0 ? ARM::t2STRi8 : ARM::t2STRi12) : ARM::STRi12);
     // Be extra careful for thumb2. t2LDRi8 can't reference a zero offset,
     // so adjust and use t2LDRi12 here for that.
     unsigned NewOpc2 = (isLd)
       ? (isT2 ? (OffImm+4 < 0 ? ARM::t2LDRi8 : ARM::t2LDRi12) : ARM::LDRi12)
       : (isT2 ? (OffImm+4 < 0 ? ARM::t2STRi8 : ARM::t2STRi12) : ARM::STRi12);
     DebugLoc dl = MBBI->getDebugLoc();
     // If this is a load and base register is killed, it may have been
     // re-defed by the load, make sure the first load does not clobber it.
     if (isLd &&
         (BaseKill || OffKill) &&
         (TRI->regsOverlap(EvenReg, BaseReg))) {
       assert(!TRI->regsOverlap(OddReg, BaseReg));
       InsertLDR_STR(MBB, MBBI, OffImm+4, isLd, dl, NewOpc2,
                     OddReg, OddDeadKill, false,
                     BaseReg, false, BaseUndef, false, OffUndef,
                     Pred, PredReg, TII, isT2);
-      NewBBI = std::prev(MBBI);
       InsertLDR_STR(MBB, MBBI, OffImm, isLd, dl, NewOpc,
                     EvenReg, EvenDeadKill, false,
                     BaseReg, BaseKill, BaseUndef, OffKill, OffUndef,
                     Pred, PredReg, TII, isT2);
     } else {
       if (OddReg == EvenReg && EvenDeadKill) {
         // If the two source operands are the same, the kill marker is
         // probably on the first one. e.g.
         // t2STRDi8 %R5<kill>, %R5, %R9<kill>, 0, 14, %reg0
         EvenDeadKill = false;
         OddDeadKill = true;
       }
       // Never kill the base register in the first instruction.
       if (EvenReg == BaseReg)
         EvenDeadKill = false;
       InsertLDR_STR(MBB, MBBI, OffImm, isLd, dl, NewOpc,
                     EvenReg, EvenDeadKill, EvenUndef,
                     BaseReg, false, BaseUndef, false, OffUndef,
                     Pred, PredReg, TII, isT2);
-      NewBBI = std::prev(MBBI);
       InsertLDR_STR(MBB, MBBI, OffImm+4, isLd, dl, NewOpc2,
                     OddReg, OddDeadKill, OddUndef,
                     BaseReg, BaseKill, BaseUndef, OffKill, OffUndef,
                     Pred, PredReg, TII, isT2);
     }
     if (isLd)
       ++NumLDRD2LDR;
     else
       ++NumSTRD2STR;
   }
 
-  MBB.erase(MI);
-  MBBI = NewBBI;
+  MBBI = MBB.erase(MBBI);
   return true;
 }
 
 /// An optimization pass to turn multiple LDR / STR ops of the same base and
 /// incrementing offset into LDM / STM ops.
 bool ARMLoadStoreOpt::LoadStoreMultipleOpti(MachineBasicBlock &MBB) {
-  unsigned NumMerges = 0;
-  unsigned NumMemOps = 0;
   MemOpQueue MemOps;
   unsigned CurrBase = 0;
   unsigned CurrOpc = ~0u;
   unsigned CurrSize = 0;
   ARMCC::CondCodes CurrPred = ARMCC::AL;
   unsigned CurrPredReg = 0;
   unsigned Position = 0;
-  SmallVector<MachineBasicBlock::iterator,4> Merges;
+  assert(Candidates.size() == 0);
+  LiveRegsValid = false;
 
-  RS->enterBasicBlock(&MBB);
-  MachineBasicBlock::iterator MBBI = MBB.begin(), E = MBB.end();
-  while (MBBI != E) {
+  for (MachineBasicBlock::iterator I = MBB.end(), MBBI; I != MBB.begin();
+       I = MBBI) {
+    // The instruction in front of the iterator is the one we look at.
+    MBBI = std::prev(I);
     if (FixInvalidRegPairOp(MBB, MBBI))
       continue;
+    ++Position;
 
-    bool Advance  = false;
-    bool TryMerge = false;
-
-    bool isMemOp = isMemoryOp(MBBI);
-    if (isMemOp) {
+    if (isMemoryOp(MBBI)) {
       unsigned Opcode = MBBI->getOpcode();
       unsigned Size = getLSMultipleTransferSize(MBBI);
       const MachineOperand &MO = MBBI->getOperand(0);
       unsigned Reg = MO.getReg();
-      bool isKill = MO.isDef() ? false : MO.isKill();
-      unsigned Base = MBBI->getOperand(1).getReg();
+      unsigned Base = getLoadStoreBaseOp(*MBBI).getReg();
       unsigned PredReg = 0;
       ARMCC::CondCodes Pred = getInstrPredicate(MBBI, PredReg);
       int Offset = getMemoryOpOffset(MBBI);
-      // Watch out for:
-      // r4 := ldr [r5]
-      // r5 := ldr [r5, #4]
-      // r6 := ldr [r5, #8]
-      //
-      // The second ldr has effectively broken the chain even though it
-      // looks like the later ldr(s) use the same base register. Try to
-      // merge the ldr's so far, including this one. But don't try to
-      // combine the following ldr(s).
-      bool Clobber = isi32Load(Opcode) && Base == MBBI->getOperand(0).getReg();
-
+      if (CurrBase == 0) {
+        // Start of a new chain.
+        CurrBase = Base;
+        CurrOpc  = Opcode;
+        CurrSize = Size;
+        CurrPred = Pred;
+        CurrPredReg = PredReg;
+        MemOps.push_back(MemOpQueueEntry(MBBI, Offset, Position));
+        continue;
+      }
+      // Note: No need to match PredReg in the next if.
+      if (CurrOpc == Opcode && CurrBase == Base && CurrPred == Pred) {
         // Watch out for:
-      // r4 := ldr [r0, #8]
-      // r4 := ldr [r0, #4]
-      //
-      // The optimization may reorder the second ldr in front of the first
-      // ldr, which violates write after write(WAW) dependence. The same as
-      // str. Try to merge inst(s) already in MemOps.
+        //   r4 := ldr [r0, #8]
+        //   r4 := ldr [r0, #4]
+        // or
+        //   r0 := ldr [r0]
+        // If a load overrides the base register or a register loaded by
+        // another load in our chain, we cannot take this instruction.
         bool Overlap = false;
-      for (MemOpQueueIter I = MemOps.begin(), E = MemOps.end(); I != E; ++I) {
-        if (TRI->regsOverlap(Reg, I->MBBI->getOperand(0).getReg())) {
+        if (isLoad(Opcode)) {
+          Overlap = (Base == Reg);
+          if (!Overlap) {
+            for (const MemOpQueueEntry &E : MemOps) {
+              if (TRI->regsOverlap(Reg, E.MI->getOperand(0).getReg())) {
                 Overlap = true;
                 break;
               }
             }
-
-      if (CurrBase == 0 && !Clobber) {
-        // Start of a new chain.
-        CurrBase = Base;
-        CurrOpc  = Opcode;
-        CurrSize = Size;
-        CurrPred = Pred;
-        CurrPredReg = PredReg;
-        MemOps.push_back(MemOpQueueEntry(Offset, Reg, isKill, Position, MBBI));
-        ++NumMemOps;
-        Advance = true;
-      } else if (!Overlap) {
-        if (Clobber) {
-          TryMerge = true;
-          Advance = true;
+          }
         }
 
-        if (CurrOpc == Opcode && CurrBase == Base && CurrPred == Pred) {
-          // No need to match PredReg.
-          // Continue adding to the queue.
+        if (!Overlap) {
+          // Check offset and sort memory operation into the current chain.
           if (Offset > MemOps.back().Offset) {
-            MemOps.push_back(MemOpQueueEntry(Offset, Reg, isKill,
-                                             Position, MBBI));
-            ++NumMemOps;
-            Advance = true;
-          } else {
-            for (MemOpQueueIter I = MemOps.begin(), E = MemOps.end();
-                 I != E; ++I) {
-              if (Offset < I->Offset) {
-                MemOps.insert(I, MemOpQueueEntry(Offset, Reg, isKill,
-                                                 Position, MBBI));
-                ++NumMemOps;
-                Advance = true;
+            MemOps.push_back(MemOpQueueEntry(MBBI, Offset, Position));
+            continue;
+          } else {
+            MemOpQueue::iterator MI, ME;
+            for (MI = MemOps.begin(), ME = MemOps.end(); MI != ME; ++MI) {
+              if (Offset < MI->Offset) {
+                // Found a place to insert.
                 break;
-              } else if (Offset == I->Offset) {
-                // Collision! This can't be merged!
+              }
+              if (Offset == MI->Offset) {
+                // Collision, abort.
+                MI = ME;
                 break;
               }
             }
+            if (MI != MemOps.end()) {
+              MemOps.insert(MI, MemOpQueueEntry(MBBI, Offset, Position));
+              continue;
             }
           }
         }
       }
 
-    if (MBBI->isDebugValue()) {
-      ++MBBI;
-      if (MBBI == E)
-        // Reach the end of the block, try merging the memory instructions.
-        TryMerge = true;
-    } else if (Advance) {
-      ++Position;
-      ++MBBI;
-      if (MBBI == E)
-        // Reach the end of the block, try merging the memory instructions.
-        TryMerge = true;
-    } else {
-      TryMerge = true;
-    }
-
-    if (TryMerge) {
-      if (NumMemOps > 1) {
-        // Try to find a free register to use as a new base in case it's needed.
-        // First advance to the instruction just before the start of the chain.
-        AdvanceRS(MBB, MemOps);
-
-        // Find a scratch register.
-        unsigned Scratch =
-          RS->FindUnusedReg(isThumb1 ? &ARM::tGPRRegClass : &ARM::GPRRegClass);
-
-        // Process the load / store instructions.
-        RS->forward(std::prev(MBBI));
-
-        // Merge ops.
-        Merges.clear();
-        MergeLDR_STR(MBB, 0, CurrBase, CurrOpc, CurrSize,
-                     CurrPred, CurrPredReg, Scratch, MemOps, Merges);
-
-        // Try folding preceding/trailing base inc/dec into the generated
-        // LDM/STM ops.
-        for (unsigned i = 0, e = Merges.size(); i < e; ++i)
-          if (MergeBaseUpdateLSMultiple(MBB, Merges[i], Advance, MBBI))
-            ++NumMerges;
-        NumMerges += Merges.size();
-
-        // Try folding preceding/trailing base inc/dec into those load/store
-        // that were not merged to form LDM/STM ops.
-        for (unsigned i = 0; i != NumMemOps; ++i)
-          if (!MemOps[i].Merged)
-            if (MergeBaseUpdateLoadStore(MBB, MemOps[i].MBBI, TII,Advance,MBBI))
-              ++NumMerges;
-
-        // RS may be pointing to an instruction that's deleted.
-        RS->skipTo(std::prev(MBBI));
-      } else if (NumMemOps == 1) {
-        // Try folding preceding/trailing base inc/dec into the single
-        // load/store.
-        if (MergeBaseUpdateLoadStore(MBB, MemOps[0].MBBI, TII, Advance, MBBI)) {
-          ++NumMerges;
-          RS->forward(std::prev(MBBI));
-        }
-      }
+      // Don't advance the iterator; The op will start a new chain next.
+      MBBI = I;
+      --Position;
+      // Fallthrough to look into existing chain.
+    } else if (MBBI->isDebugValue())
+      continue;
 
+    // If we are here then the chain is broken; Extract candidates for a merge.
+    if (MemOps.size() > 0) {
+      FormCandidates(MemOps);
+      // Reset for the next chain.
       CurrBase = 0;
       CurrOpc = ~0u;
       CurrSize = 0;
       CurrPred = ARMCC::AL;
       CurrPredReg = 0;
-      if (NumMemOps) {
-        MemOps.clear();
-        NumMemOps = 0;
-      }
+  }
+  if (MemOps.size() > 0)
+    FormCandidates(MemOps);
 
-      // If iterator hasn't been advanced and this is not a memory op, skip it.
-      // It can't start a new chain anyway.
-      if (!Advance && !isMemOp && MBBI != E) {
-        ++Position;
-        ++MBBI;
+  // Sort candidates so they get processed from end to begin of the basic
+  // block later; This is necessary for liveness calculation.
+  auto LessThan = [](const MergeCandidate* M0, const MergeCandidate *M1) {
+    return M0->InsertPos < M1->InsertPos;
+  };
+  std::sort(Candidates.begin(), Candidates.end(), LessThan);
+
+  // Go through list of candidates and merge.
+  bool Changed = false;
+  for (const MergeCandidate *Candidate : Candidates) {
+    if (Candidate->Instrs.size() > 1) {
+      MachineInstr *Merged = MergeOpsUpdate(*Candidate);
+      // Merge preceding/trailing base inc/dec into the merged op.
+      if (Merged) {
+        MergeBaseUpdateLSMultiple(Merged);
+        Changed = true;
+      } else {
+        for (MachineInstr *MI : Candidate->Instrs) {
+          if (MergeBaseUpdateLoadStore(MI))
+            Changed = true;
         }
       }
+    } else {
+      assert(Candidate->Instrs.size() == 1);
+      if (MergeBaseUpdateLoadStore(Candidate->Instrs.front()))
+        Changed = true;
     }
-  return NumMerges > 0;
+  }
+  Candidates.clear();
+
+  return Changed;
 }
 
 /// If this is a exit BB, try merging the return ops ("bx lr" and "mov pc, lr")
 /// into the preceding stack restore so it directly restore the value of LR
 /// into pc.
 ///   ldmfd sp!, {..., lr}
 ///   bx lr
 /// or
if (Opcode == ARM::LDMIA_UPD || Opcode == ARM::LDMDA_UPD ||
       MBB.erase(MBBI);
       return true;
     }
   }
   return false;
 }
 
 bool ARMLoadStoreOpt::runOnMachineFunction(MachineFunction &Fn) {
+  MF = &Fn;
   STI = &static_cast<const ARMSubtarget &>(Fn.getSubtarget());
   TL = STI->getTargetLowering();
   AFI = Fn.getInfo<ARMFunctionInfo>();
   TII = STI->getInstrInfo();
   TRI = STI->getRegisterInfo();
-  RS = new RegScavenger();
+  MRI = &Fn.getRegInfo();
+  RegClassInfoValid = false;
   isThumb2 = AFI->isThumb2Function();
   isThumb1 = AFI->isThumbFunction() && !isThumb2;
 
   bool Modified = false;
   for (MachineFunction::iterator MFI = Fn.begin(), E = Fn.end(); MFI != E;
        ++MFI) {
     MachineBasicBlock &MBB = *MFI;
     Modified |= LoadStoreMultipleOpti(MBB);
     if (STI->hasV5TOps())
       Modified |= MergeReturnIntoLDM(MBB);
   }
 
-  delete RS;
+  Allocator.Reset();
   return Modified;
 }
 
 namespace {
   /// Pre- register allocation pass that move load / stores from consecutive
   /// locations close to make it more likely they will be combined later.
   struct ARMPreAllocLoadStoreOpt : public MachineFunctionPass{
     static char ID;
for (; MBBI != E; ++MBBI) {
 
       if (!isMemoryOp(MI))
         continue;
       unsigned PredReg = 0;
       if (getInstrPredicate(MI, PredReg) != ARMCC::AL)
         continue;
 
       int Opc = MI->getOpcode();
-      bool isLd = isi32Load(Opc) || Opc == ARM::VLDRS || Opc == ARM::VLDRD;
+      bool isLd = isLoad(Opc);
       unsigned Base = MI->getOperand(1).getReg();
       int Offset = getMemoryOpOffset(MI);
 
       bool StopHere = false;
       if (isLd) {
         DenseMap<unsigned, SmallVector<MachineInstr*, 4> >::iterator BI =
           Base2LdsMap.find(Base);
         if (BI != Base2LdsMap.end()) {

test/CodeGen/ARM/2013-05-13-AAPCS-byval-padding2.ll

 ;PR15293: ARM codegen ice - expected larger existing stack allocation
 ;RUN: llc -mtriple=arm-linux-gnueabihf < %s | FileCheck %s
 
 %struct4bytes = type { i32 }
 %struct20bytes = type { i32, i32, i32, i32, i32 }
 
 define void @foo(%struct4bytes* byval %p0, ; --> R0
                  %struct20bytes* byval %p1 ; --> R1,R2,R3, [SP+0 .. SP+8)
 ) {
 ;CHECK:  sub  sp, sp, #16
 ;CHECK:  push  {r11, lr}
-;CHECK:  add  r11, sp, #8
-;CHECK:  stm  r11, {r0, r1, r2, r3}
+;CHECK:  add  r12, sp, #8
+;CHECK:  stm  r12, {r0, r1, r2, r3}
 ;CHECK:  add  r0, sp, #12
 ;CHECK:  bl  useInt
 ;CHECK:  pop  {r11, lr}
 ;CHECK:  add  sp, sp, #16
 
   %1 = ptrtoint %struct20bytes* %p1 to i32
   tail call void @useInt(i32 %1)
   ret void
 }
 
 declare void @useInt(i32)