[LV] Test once if vector trip count is zero, instead of twice

[Ayal]

Summary

Before reaching the header block of the vectorized loop, the Loop Vectorizer generates two conditions to make sure the vectorized loop will iterate at-least once: first emitVectorLoopEnteredCheck() compares the Scalar Trip Count to VF*UF, and if the former is not less than the latter, emitMinimumIterationCountCheck() compares the Vector Trip Count to zero.

In general, VTC = STC mod VF*UF, unless this does not comply with an optional constraint to execute at-least a single scalar iteration in the epilog, aka requiresScalarEpilogue(). In this case a single (the last) vector iteration is peeled and replaced with VF*UF scalar iterations (instead of none), reducing VTC by 1.

This patch replaces the above two comparisons for VTC == 0 with a single comparison:

• STC < VF*UF, when requiresScalarEpilogue() does not hold; or
• STC <= VF*UF, when requiresScalarEpilogue() does hold,

effectively removing the basic-block originally named "min.iters.checked".

The original documentation of emitMinimumIterationCountCheck() claiming it checks for overflow seems obsolete (right?).

Original observation and initial patch by Evgeny Stupachenko.

[Ayal]

ping

[mkuper]

Re overflow - the point is that getOrCreateTripCount() returns, basically, PSE.getBackedgeTakenCount() + 1, and that may overflow, so the "trip count" may end up being 0 if the backedge taken count is 0. I don't think this is outdated, and this is behavior we want to preserve. But this patch should preserve this behavior IIUC. Can you make sure there's a test for this?

Anyway, the logic seems sound, but I'd like wmi to look at it - he added the minimum iterations check in r245952, and combined it with the overflow check, instead of the VTC==0 check.
Wei, is there some case we're missing here?

One more thing about the description: "In this case a single (the last) vector iteration is peeled and replaced with VF*UF scalar iterations (instead of none), reducing VTC by 1." <-- this is confusing. That only happens if STC == 0 (mod VF * UF). So the logic is correct, since this is indeed what happens when STC == VF * UF, but I would phrase it differently.

[wmi]

In D34150#802750, @mkuper wrote:

Re overflow - the point is that getOrCreateTripCount() returns, basically, PSE.getBackedgeTakenCount() + 1, and that may overflow, so the "trip count" may end up being 0 if the backedge taken count is 0. I don't think this is outdated, and this is behavior we want to preserve. But this patch should preserve this behavior IIUC. Can you make sure there's a test for this?

max_i32_backedgetaken in test/Transforms/LoopVectorize/induction.ll is the orginal test for overflow case. The patch generates correct code for it.

Anyway, the logic seems sound, but I'd like wmi to look at it - he added the minimum iterations check in r245952, and combined it with the overflow check, instead of the VTC==0 check.
Wei, is there some case we're missing here?

The logic looks good to me. It is a nice improvement.

One more thing about the description: "In this case a single (the last) vector iteration is peeled and replaced with VF*UF scalar iterations (instead of none), reducing VTC by 1." <-- this is confusing. That only happens if STC == 0 (mod VF * UF). So the logic is correct, since this is indeed what happens when STC == VF * UF, but I would phrase it differently.

[mkuper]

Thanks, Wei.
LGTM.

[Ayal]

In D34150#802750, @mkuper wrote:

Re overflow - the point is that getOrCreateTripCount() returns, basically, PSE.getBackedgeTakenCount() + 1, and that may overflow, so the "trip count" may end up being 0 if the backedge taken count is 0. I don't think this is outdated, and this is behavior we want to preserve. But this patch should preserve this behavior IIUC.

Ahh, right. This patch is indeed intended to preserve the existing behavior. In D12107 @anemet specifically asked not to remove the explanation for the need of checking overflow. Will make sure this explanation remains in place.

In D34150#805377, @wmi wrote:

In D34150#802750, @mkuper wrote:

Re overflow - the point is that getOrCreateTripCount() returns, basically, PSE.getBackedgeTakenCount() + 1, and that may overflow, so the "trip count" may end up being 0 if the backedge taken count is 0. I don't think this is outdated, and this is behavior we want to preserve. But this patch should preserve this behavior IIUC. Can you make sure there's a test for this?

max_i32_backedgetaken in test/Transforms/LoopVectorize/induction.ll is the orginal test for overflow case. The patch generates correct code for it.

Also miniters.ll test added back in r245952 checks for the right min.iters.check, so that seems to be covered. However, a devised test shows that vector.scevcheck may generate its own checks to guard against potential overflow of the trip count, presumably unaware that min.iters.check took care of it(?); so there may be a third test involved in checking if the vector trip count is zero... Will open a PR, as this deserves a separate fix.

BTW, a scalar loop whose trip count is uintxx_max+1 may actually (theoretically?) be a good candidate to vectorize; provided we compute its vector trip count correctly. Such loops however are expected to appear seldom in practice, if at all(?)

In D34150#805377, @wmi wrote:

In D34150#802750, @mkuper wrote:

Anyway, the logic seems sound, but I'd like wmi to look at it - he added the minimum iterations check in r245952, and combined it with the overflow check, instead of the VTC==0 check.
Wei, is there some case we're missing here?

The logic looks good to me. It is a nice improvement.

Thanks :-). Perhaps this is what @jmolloy referred to originally back in D12107:

In D12107#235903, @jmolloy wrote:

We do actually already emit such a check - we just emit it late. This new check now makes the later check redundant, so we should remove it.

In D34150#802750, @mkuper wrote:

One more thing about the description: "In this case a single (the last) vector iteration is peeled and replaced with VF*UF scalar iterations (instead of none), reducing VTC by 1." <-- this is confusing. That only happens if STC == 0 (mod VF * UF). So the logic is correct, since this is indeed what happens when STC == VF * UF, but I would phrase it differently.

Right, sorry for the confusion.
Another, hopefully less confusing way to phrase this: when requiresScalarEpilogue() holds, at-least one iteration must remain scalar; the rest can be used to form vector iterations. So VTC = (STC-1) mod VF*UF, and so VTC is zero iff STC-1 < VF*UF, which we convert to STC <= VF*UF.

[Ayal]

Added the following comment following review, and updated a testcase that was recently modified (if-conversion-nest.ll)

// Now, compare the new count to zero. If it is zero skip the vector loop and
// jump to the scalar loop. This check also covers the case where the
// backedge-taken count is unit##_max: adding one to it will overflow leading
// to an incorrect trip count of zero. In this case we will also jump to the
// scalar loop, instead of trying to vectorize with a correct trip count, as
// such loops are expected to be extremely rare.
emitMinimumIterationCountCheck(Lp, ScalarPH);

lib/Transforms/Vectorize/LoopVectorize.cpp

protected:
   virtual Value *reverseVector(Value *Vec);
 
   /// Returns (and creates if needed) the original loop trip count.
   Value *getOrCreateTripCount(Loop *NewLoop);
 
   /// Returns (and creates if needed) the trip count of the widened loop.
   Value *getOrCreateVectorTripCount(Loop *NewLoop);
 
-  /// Emit a bypass check to see if the trip count would overflow, or we
-  /// wouldn't have enough iterations to execute one vector loop.
-  void emitMinimumIterationCountCheck(Loop *L, BasicBlock *Bypass);
   /// Emit a bypass check to see if the vector trip count is nonzero.
-  void emitVectorLoopEnteredCheck(Loop *L, BasicBlock *Bypass);
+  void emitMinimumIterationCountCheck(Loop *L, BasicBlock *Bypass);
   /// Emit a bypass check to see if all of the SCEV assumptions we've
   /// had to make are correct.
   void emitSCEVChecks(Loop *L, BasicBlock *Bypass);
   /// Emit bypass checks to check any memory assumptions we may have made.
   void emitMemRuntimeChecks(Loop *L, BasicBlock *Bypass);
 
   /// Add additional metadata to \p To that was not present on \p Orig.
   ///

 void InnerLoopVectorizer::emitMinimumIterationCountCheck(Loop *L,
                                                          BasicBlock *Bypass) {
   Value *Count = getOrCreateTripCount(L);
   BasicBlock *BB = L->getLoopPreheader();
   IRBuilder<> Builder(BB->getTerminator());
 
   // Generate code to check that the loop's trip count that we computed by
   // adding one to the backedge-taken count will not overflow.
-  Value *CheckMinIters = Builder.CreateICmpULT(
-      Count, ConstantInt::get(Count->getType(), VF * UF), "min.iters.check");
-
-  BasicBlock *NewBB =
-      BB->splitBasicBlock(BB->getTerminator(), "min.iters.checked");
-  // Update dominator tree immediately if the generated block is a
-  // LoopBypassBlock because SCEV expansions to generate loop bypass
-  // checks may query it before the current function is finished.
-  DT->addNewBlock(NewBB, BB);
-  if (L->getParentLoop())
-    L->getParentLoop()->addBasicBlockToLoop(NewBB, *LI);
-  ReplaceInstWithInst(BB->getTerminator(),
-                      BranchInst::Create(Bypass, NewBB, CheckMinIters));
-  LoopBypassBlocks.push_back(BB);
-}
+  auto P = Legal->requiresScalarEpilogue() ? ICmpInst::ICMP_ULE
+                                           : ICmpInst::ICMP_ULT;
+  Value *CheckMinIters = Builder.CreateICmp(
+      P, Count, ConstantInt::get(Count->getType(), VF * UF), "min.iters.check");
 
-void InnerLoopVectorizer::emitVectorLoopEnteredCheck(Loop *L,
-                                                     BasicBlock *Bypass) {
-  Value *TC = getOrCreateVectorTripCount(L);
-  BasicBlock *BB = L->getLoopPreheader();
-  IRBuilder<> Builder(BB->getTerminator());
-
-  // Now, compare the new count to zero. If it is zero skip the vector loop and
-  // jump to the scalar loop.
-  Value *Cmp = Builder.CreateICmpEQ(TC, Constant::getNullValue(TC->getType()),
-                                    "cmp.zero");
-
-  // Generate code to check that the loop's trip count that we computed by
-  // adding one to the backedge-taken count will not overflow.
   BasicBlock *NewBB = BB->splitBasicBlock(BB->getTerminator(), "vector.ph");
   // Update dominator tree immediately if the generated block is a
   // LoopBypassBlock because SCEV expansions to generate loop bypass
   // checks may query it before the current function is finished.
   DT->addNewBlock(NewBB, BB);
   if (L->getParentLoop())
     L->getParentLoop()->addBasicBlockToLoop(NewBB, *LI);
   ReplaceInstWithInst(BB->getTerminator(),
-                      BranchInst::Create(Bypass, NewBB, Cmp));
+                      BranchInst::Create(Bypass, NewBB, CheckMinIters));
   LoopBypassBlocks.push_back(BB);
 }
 
 void InnerLoopVectorizer::emitSCEVChecks(Loop *L, BasicBlock *Bypass) {
   BasicBlock *BB = L->getLoopPreheader();
 
   // Generate the code to check that the SCEV assumptions that we made.
   // We want the new basic block to start at the first instruction in a
void InnerLoopVectorizer::createVectorizedLoopSkeleton() {
   }
   Lp->addBasicBlockToLoop(VecBody, *LI);
 
   // Find the loop boundaries.
   Value *Count = getOrCreateTripCount(Lp);
 
   Value *StartIdx = ConstantInt::get(IdxTy, 0);
 
-  // We need to test whether the backedge-taken count is uint##_max. Adding one
-  // to it will cause overflow and an incorrect loop trip count in the vector
-  // body. In case of overflow we want to directly jump to the scalar remainder
-  // loop.
-  emitMinimumIterationCountCheck(Lp, ScalarPH);
   // Now, compare the new count to zero. If it is zero skip the vector loop and
   // jump to the scalar loop.
-  emitVectorLoopEnteredCheck(Lp, ScalarPH);
+  emitMinimumIterationCountCheck(Lp, ScalarPH);
   // Generate the code to check any assumptions that we've made for SCEV
   // expressions.
   emitSCEVChecks(Lp, ScalarPH);
 
   // Generate the code that checks in runtime if arrays overlap. We put the
   // checks into a separate block to make the more common case of few elements
   // faster.
   emitMemRuntimeChecks(Lp, ScalarPH);
for (auto &InductionEntry : *List) {
     // Create phi nodes to merge from the  backedge-taken check block.
     PHINode *BCResumeVal = PHINode::Create(
         OrigPhi->getType(), 3, "bc.resume.val", ScalarPH->getTerminator());
     Value *&EndValue = IVEndValues[OrigPhi];
     if (OrigPhi == OldInduction) {
       // We know what the end value is.
       EndValue = CountRoundDown;
     } else {
-      IRBuilder<> B(LoopBypassBlocks.back()->getTerminator());
+      IRBuilder<> B(Lp->getLoopPreheader()->getTerminator());
       Type *StepType = II.getStep()->getType();
       Instruction::CastOps CastOp =
         CastInst::getCastOpcode(CountRoundDown, true, StepType, true);
       Value *CRD = B.CreateCast(CastOp, CountRoundDown, StepType, "cast.crd");
       const DataLayout &DL = OrigLoop->getHeader()->getModule()->getDataLayout();
       EndValue = II.transform(B, CRD, PSE.getSE(), DL);
       EndValue->setName("ind.end");
     }
void InnerLoopVectorizer::fixReduction(PHINode *Phi) {
   RecurrenceDescriptor::MinMaxRecurrenceKind MinMaxKind =
     RdxDesc.getMinMaxRecurrenceKind();
   setDebugLocFromInst(Builder, ReductionStartValue);
 
   // We need to generate a reduction vector from the incoming scalar.
   // To do so, we need to generate the 'identity' vector and override
   // one of the elements with the incoming scalar reduction. We need
   // to do it in the vector-loop preheader.
-  Builder.SetInsertPoint(LoopBypassBlocks[1]->getTerminator());
+  Builder.SetInsertPoint(LoopVectorPreHeader->getTerminator());
 
   // This is the vector-clone of the value that leaves the loop.
   const VectorParts &VectorExit = getVectorValue(LoopExitInst);
   Type *VecTy = VectorExit[0]->getType();
 
   // Find the reduction identity variable. Zero for addition, or, xor,
   // one for multiplication, -1 for And.
   Value *Identity;

test/Transforms/LoopVectorize/X86/float-induction-x86.ll

 for.end:                                          ; preds = %for.end.loopexit, %entry
   ret void
 }
 
 ; AUTO_VEC-LABEL: @external_use_with_fast_math(
 ; AUTO_VEC-NEXT:  entry:
 ; AUTO_VEC-NEXT:    [[TMP0:%.*]] = icmp sgt i64 %n, 1
 ; AUTO_VEC-NEXT:    [[SMAX:%.*]] = select i1 [[TMP0]], i64 %n, i64 1
-; AUTO_VEC:         br i1 {{.*}}, label %for.body, label %min.iters.checked
-; AUTO_VEC:       min.iters.checked:
+; AUTO_VEC:         br i1 {{.*}}, label %for.body, label %vector.ph
+; AUTO_VEC:       vector.ph:
 ; AUTO_VEC-NEXT:    [[N_VEC:%.*]] = and i64 [[SMAX]], 9223372036854775792
-; AUTO_VEC:         br i1 {{.*}}, label %for.body, label %vector.body
+; AUTO_VEC:         br label %vector.body
 ; AUTO_VEC:       middle.block:
 ; AUTO_VEC:         [[TMP11:%.*]] = add nsw i64 [[N_VEC]], -1
 ; AUTO_VEC-NEXT:    [[CAST_CMO:%.*]] = sitofp i64 [[TMP11]] to double
 ; AUTO_VEC-NEXT:    [[TMP12:%.*]] = fmul fast double [[CAST_CMO]], 3.000000e+00
 ; AUTO_VEC-NEXT:    br i1 {{.*}}, label %for.end, label %for.body
 ; AUTO_VEC:       for.end:
 ; AUTO_VEC-NEXT:    [[J_LCSSA:%.*]] = phi double [ [[TMP12]], %middle.block ], [ %j, %for.body ]
 ; AUTO_VEC-NEXT:    ret double [[J_LCSSA]]

test/Transforms/LoopVectorize/debugloc.ll

 ; RUN: opt -S < %s -loop-vectorize -force-vector-interleave=1 -force-vector-width=2 | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 
 ; Make sure we are preserving debug info in the vectorized code.
 
 ; CHECK: for.body.lr.ph
-; CHECK:   cmp.zero = icmp eq i64 {{.*}}, 0, !dbg !{{[0-9]+}}
+; CHECK:   min.iters.check = icmp ult i64 {{.*}}, 2, !dbg !{{[0-9]+}}
 ; CHECK: vector.body
 ; CHECK:   index {{.*}}, !dbg ![[LOC:[0-9]+]]
 ; CHECK:   getelementptr inbounds i32, i32* %a, {{.*}}, !dbg ![[LOC]]
 ; CHECK:   load <2 x i32>, <2 x i32>* {{.*}}, !dbg ![[LOC]]
 ; CHECK:   add <2 x i32> {{.*}}, !dbg ![[LOC]]
 ; CHECK:   add i64 %index, 2, !dbg ![[LOC]]
 ; CHECK:   icmp eq i64 %index.next, %n.vec, !dbg ![[LOC]]
 ; CHECK: middle.block

test/Transforms/LoopVectorize/first-order-recurrence.ll

 ; CHECK:         %vector.recur.init = insertelement <4 x i32> undef, i32 %pre_load, i32 3
 ; CHECK:       vector.body:
 ; CHECK:         %vector.recur = phi <4 x i32> [ %vector.recur.init, %vector.ph ], [ [[L1:%[a-zA-Z0-9.]+]], %vector.body ]
 ; CHECK:         [[L1]] = load <4 x i32>
 ; CHECK:         {{.*}} = shufflevector <4 x i32> %vector.recur, <4 x i32> [[L1]], <4 x i32> <i32 3, i32 4, i32 5, i32 6>
 ; CHECK:       middle.block:
 ; CHECK:         %vector.recur.extract = extractelement <4 x i32> [[L1]], i32 3
 ; CHECK:       scalar.ph:
-; CHECK:         %scalar.recur.init = phi i32 [ %vector.recur.extract, %middle.block ], [ %pre_load, %vector.memcheck ], [ %pre_load, %min.iters.checked ], [ %pre_load, %for.preheader ]
+; CHECK:         %scalar.recur.init = phi i32 [ %vector.recur.extract, %middle.block ], [ %pre_load, %vector.memcheck ], [ %pre_load, %for.preheader ]
 ; CHECK:       scalar.body:
 ; CHECK:         %scalar.recur = phi i32 [ %scalar.recur.init, %scalar.ph ], [ {{.*}}, %scalar.body ]
 ;
 ; UNROLL-LABEL: @recurrence_1(
 ; UNROLL:       vector.body:
 ; UNROLL:         %vector.recur = phi <4 x i32> [ %vector.recur.init, %vector.ph ], [ [[L2:%[a-zA-Z0-9.]+]], %vector.body ]
 ; UNROLL:         [[L1:%[a-zA-Z0-9.]+]] = load <4 x i32>
 ; UNROLL:         [[L2]] = load <4 x i32>

 ; CHECK:         %vector.recur.init = insertelement <4 x i32> undef, i32 %.pre, i32 3
 ; CHECK:       vector.body:
 ; CHECK:         %vector.recur = phi <4 x i32> [ %vector.recur.init, %vector.ph ], [ [[L1:%[a-zA-Z0-9.]+]], %vector.body ]
 ; CHECK:         [[L1]] = load <4 x i32>
 ; CHECK:         {{.*}} = shufflevector <4 x i32> %vector.recur, <4 x i32> [[L1]], <4 x i32> <i32 3, i32 4, i32 5, i32 6>
 ; CHECK:       middle.block:
 ; CHECK:         %vector.recur.extract = extractelement <4 x i32> [[L1]], i32 3
 ; CHECK:       scalar.ph:
-; CHECK:         %scalar.recur.init = phi i32 [ %vector.recur.extract, %middle.block ], [ %.pre, %min.iters.checked ], [ %.pre, %for.preheader ]
+; CHECK:         %scalar.recur.init = phi i32 [ %vector.recur.extract, %middle.block ], [ %.pre, %for.preheader ]
 ; CHECK:       scalar.body:
 ; CHECK:         %scalar.recur = phi i32 [ %scalar.recur.init, %scalar.ph ], [ {{.*}}, %scalar.body ]
 ;
 ; UNROLL-LABEL: @recurrence_2(
 ; UNROLL:       vector.body:
 ; UNROLL:         %vector.recur = phi <4 x i32> [ %vector.recur.init, %vector.ph ], [ [[L2:%[a-zA-Z0-9.]+]], %vector.body ]
 ; UNROLL:         [[L1:%[a-zA-Z0-9.]+]] = load <4 x i32>
 ; UNROLL:         [[L2]] = load <4 x i32>

 ; CHECK:         %vector.recur.init = insertelement <4 x i16> undef, i16 %0, i32 3
 ; CHECK:       vector.body:
 ; CHECK:         %vector.recur = phi <4 x i16> [ %vector.recur.init, %vector.ph ], [ [[L1:%[a-zA-Z0-9.]+]], %vector.body ]
 ; CHECK:         [[L1]] = load <4 x i16>
 ; CHECK:         {{.*}} = shufflevector <4 x i16> %vector.recur, <4 x i16> [[L1]], <4 x i32> <i32 3, i32 4, i32 5, i32 6>
 ; CHECK:       middle.block:
 ; CHECK:         %vector.recur.extract = extractelement <4 x i16> [[L1]], i32 3
 ; CHECK:       scalar.ph:
-; CHECK:         %scalar.recur.init = phi i16 [ %vector.recur.extract, %middle.block ], [ %0, %vector.memcheck ], [ %0, %min.iters.checked ], [ %0, %for.preheader ]
+; CHECK:         %scalar.recur.init = phi i16 [ %vector.recur.extract, %middle.block ], [ %0, %vector.memcheck ], [ %0, %for.preheader ]
 ; CHECK:       scalar.body:
 ; CHECK:         %scalar.recur = phi i16 [ %scalar.recur.init, %scalar.ph ], [ {{.*}}, %scalar.body ]
 ;
 ; UNROLL-LABEL: @recurrence_3(
 ; UNROLL:       vector.body:
 ; UNROLL:         %vector.recur = phi <4 x i16> [ %vector.recur.init, %vector.ph ], [ [[L2:%[a-zA-Z0-9.]+]], %vector.body ]
 ; UNROLL:         [[L1:%[a-zA-Z0-9.]+]] = load <4 x i16>
 ; UNROLL:         [[L2]] = load <4 x i16>
for.cond.cleanup3:
   %e.1.lcssa = phi i32 [ %e.1, %for.cond1 ]
   %inc = add nuw nsw i32 %i.016, 1
   %exitcond = icmp eq i32 %inc, 49
   br i1 %exitcond, label %for.cond.cleanup, label %for.cond1.preheader
 }
 
 ; UNROLL-NO-IC-LABEL: @PR30183(
 ; UNROLL-NO-IC:       vector.ph:
-; UNROLL-NO-IC-NEXT:    [[VECTOR_RECUR_INIT:%.*]] = insertelement <4 x i32> undef, i32 [[PRE_LOAD:%.*]], i32 3
+; UNROLL-NO-IC:         [[VECTOR_RECUR_INIT:%.*]] = insertelement <4 x i32> undef, i32 [[PRE_LOAD:%.*]], i32 3
 ; UNROLL-NO-IC-NEXT:    br label %vector.body
 ; UNROLL-NO-IC:       vector.body:
 ; UNROLL-NO-IC-NEXT:    [[INDEX:%.*]] = phi i64 [ 0, %vector.ph ], [ [[INDEX_NEXT:%.*]], %vector.body ]
 ; UNROLL-NO-IC-NEXT:    [[VECTOR_RECUR:%.*]] = phi <4 x i32> [ [[VECTOR_RECUR_INIT]], %vector.ph ], [ [[TMP42:%.*]], %vector.body ]
 ; UNROLL-NO-IC:         [[TMP27:%.*]] = load i32, i32* {{.*}}
 ; UNROLL-NO-IC-NEXT:    [[TMP28:%.*]] = load i32, i32* {{.*}}
 ; UNROLL-NO-IC-NEXT:    [[TMP29:%.*]] = load i32, i32* {{.*}}
 ; UNROLL-NO-IC-NEXT:    [[TMP30:%.*]] = load i32, i32* {{.*}}

test/Transforms/LoopVectorize/float-induction.ll

 ;  for (int i=0; i < N; ++i) {
 ;    A[i] = x;
 ;    x -= fp_inc;
 ;  }
 ;}
 
 ; VEC4_INTERL1-LABEL: @fp_iv_loop1(
 ; VEC4_INTERL1:       vector.ph:
-; VEC4_INTERL1-NEXT:    [[DOTSPLATINSERT:%.*]] = insertelement <4 x float> undef, float %init, i32 0
+; VEC4_INTERL1:         [[DOTSPLATINSERT:%.*]] = insertelement <4 x float> undef, float %init, i32 0
 ; VEC4_INTERL1-NEXT:    [[DOTSPLAT:%.*]] = shufflevector <4 x float> [[DOTSPLATINSERT]], <4 x float> undef, <4 x i32> zeroinitializer
 ; VEC4_INTERL1-NEXT:    [[DOTSPLATINSERT2:%.*]] = insertelement <4 x float> undef, float %fpinc, i32 0
 ; VEC4_INTERL1-NEXT:    [[DOTSPLAT3:%.*]] = shufflevector <4 x float> [[DOTSPLATINSERT2]], <4 x float> undef, <4 x i32> zeroinitializer
 ; VEC4_INTERL1-NEXT:    [[TMP5:%.*]] = fmul fast <4 x float> [[DOTSPLAT3]], <float 0.000000e+00, float 1.000000e+00, float 2.000000e+00, float 3.000000e+00>
 ; VEC4_INTERL1-NEXT:    [[INDUCTION4:%.*]] = fsub fast <4 x float> [[DOTSPLAT]], [[TMP5]]
 ; VEC4_INTERL1-NEXT:    [[TMP6:%.*]] = fmul fast float %fpinc, 4.000000e+00
 ; VEC4_INTERL1-NEXT:    [[DOTSPLATINSERT5:%.*]] = insertelement <4 x float> undef, float [[TMP6]], i32 0
 ; VEC4_INTERL1-NEXT:    [[DOTSPLAT6:%.*]] = shufflevector <4 x float> [[DOTSPLATINSERT5]], <4 x float> undef, <4 x i32> zeroinitializer
 ; VEC4_INTERL1-NEXT:    br label %vector.body
 ; VEC4_INTERL1:       vector.body:
 ; VEC4_INTERL1-NEXT:    [[INDEX:%.*]] = phi i64 [ 0, %vector.ph ], [ [[INDEX_NEXT:%.*]], %vector.body ]
 ; VEC4_INTERL1-NEXT:    [[VEC_IND:%.*]] = phi <4 x float> [ [[INDUCTION4]], %vector.ph ], [ [[VEC_IND_NEXT:%.*]], %vector.body ]
 ; VEC4_INTERL1-NEXT:    [[TMP8:%.*]] = getelementptr inbounds float, float* %A, i64 [[INDEX]]
 ; VEC4_INTERL1-NEXT:    [[TMP9:%.*]] = bitcast float* [[TMP8]] to <4 x float>*
 ; VEC4_INTERL1-NEXT:    store <4 x float> [[VEC_IND]], <4 x float>* [[TMP9]], align 4
 ; VEC4_INTERL1-NEXT:    [[INDEX_NEXT]] = add i64 [[INDEX]], 4
 ; VEC4_INTERL1-NEXT:    [[VEC_IND_NEXT]] = fsub fast <4 x float> [[VEC_IND]], [[DOTSPLAT6]]
 ; VEC4_INTERL1:         br i1 {{.*}}, label %middle.block, label %vector.body
 
 ; VEC4_INTERL2-LABEL: @fp_iv_loop1(
 ; VEC4_INTERL2:       vector.ph:
-; VEC4_INTERL2-NEXT:    [[DOTSPLATINSERT:%.*]] = insertelement <4 x float> undef, float %init, i32 0
+; VEC4_INTERL2:         [[DOTSPLATINSERT:%.*]] = insertelement <4 x float> undef, float %init, i32 0
 ; VEC4_INTERL2-NEXT:    [[DOTSPLAT:%.*]] = shufflevector <4 x float> [[DOTSPLATINSERT]], <4 x float> undef, <4 x i32> zeroinitializer
 ; VEC4_INTERL2-NEXT:    [[DOTSPLATINSERT3:%.*]] = insertelement <4 x float> undef, float %fpinc, i32 0
 ; VEC4_INTERL2-NEXT:    [[DOTSPLAT4:%.*]] = shufflevector <4 x float> [[DOTSPLATINSERT3]], <4 x float> undef, <4 x i32> zeroinitializer
 ; VEC4_INTERL2-NEXT:    [[TMP5:%.*]] = fmul fast <4 x float> [[DOTSPLAT4]], <float 0.000000e+00, float 1.000000e+00, float 2.000000e+00, float 3.000000e+00>
 ; VEC4_INTERL2-NEXT:    [[INDUCTION5:%.*]] = fsub fast <4 x float> [[DOTSPLAT]], [[TMP5]]
 ; VEC4_INTERL2-NEXT:    [[TMP6:%.*]] = fmul fast float %fpinc, 4.000000e+00
 ; VEC4_INTERL2-NEXT:    [[DOTSPLATINSERT6:%.*]] = insertelement <4 x float> undef, float [[TMP6]], i32 0
 ; VEC4_INTERL2-NEXT:    [[DOTSPLAT7:%.*]] = shufflevector <4 x float> [[DOTSPLATINSERT6]], <4 x float> undef, <4 x i32> zeroinitializer

 ; VEC4_INTERL2-NEXT:    [[TMP12:%.*]] = bitcast float* [[TMP11]] to <4 x float>*
 ; VEC4_INTERL2-NEXT:    store <4 x float> [[STEP_ADD]], <4 x float>* [[TMP12]], align 4
 ; VEC4_INTERL2-NEXT:    [[INDEX_NEXT]] = add i64 [[INDEX]], 8
 ; VEC4_INTERL2-NEXT:    [[VEC_IND_NEXT]] = fsub fast <4 x float> [[STEP_ADD]], [[DOTSPLAT7]]
 ; VEC4_INTERL2:         br i1 {{.*}}, label %middle.block, label %vector.body
 
 ; VEC1_INTERL2-LABEL: @fp_iv_loop1(
 ; VEC1_INTERL2:       vector.ph:
-; VEC1_INTERL2-NEXT:    br label %vector.body
+; VEC1_INTERL2:         br label %vector.body
 ; VEC1_INTERL2:       vector.body:
 ; VEC1_INTERL2-NEXT:    [[INDEX:%.*]] = phi i64 [ 0, %vector.ph ], [ [[INDEX_NEXT:%.*]], %vector.body ]
 ; VEC1_INTERL2-NEXT:    [[INDUCTION2:%.*]] = or i64 [[INDEX]], 1
 ; VEC1_INTERL2-NEXT:    [[TMP6:%.*]] = sitofp i64 [[INDEX]] to float
 ; VEC1_INTERL2-NEXT:    [[TMP7:%.*]] = fmul fast float %fpinc, [[TMP6]]
 ; VEC1_INTERL2-NEXT:    [[FP_OFFSET_IDX:%.*]] = fsub fast float %init, [[TMP7]]
 ; VEC1_INTERL2-NEXT:    [[TMP8:%.*]] = fsub fast float [[FP_OFFSET_IDX]], %fpinc
 ; VEC1_INTERL2-NEXT:    [[TMP9:%.*]] = getelementptr inbounds float, float* %A, i64 [[INDEX]]

 ;  for (int i=0; i < N; ++i) {
 ;    A[i] = x;
 ;    x += 0.5;
 ;  }
 ;}
 
 ; VEC4_INTERL1-LABEL: @fp_iv_loop2(
 ; VEC4_INTERL1:       vector.ph:
-; VEC4_INTERL1-NEXT:    [[DOTSPLATINSERT:%.*]] = insertelement <4 x float> undef, float %init, i32 0
+; VEC4_INTERL1:         [[DOTSPLATINSERT:%.*]] = insertelement <4 x float> undef, float %init, i32 0
 ; VEC4_INTERL1-NEXT:    [[DOTSPLAT:%.*]] = shufflevector <4 x float> [[DOTSPLATINSERT]], <4 x float> undef, <4 x i32> zeroinitializer
 ; VEC4_INTERL1-NEXT:    [[INDUCTION2:%.*]] = fadd fast <4 x float> [[DOTSPLAT]], <float 0.000000e+00, float 5.000000e-01, float 1.000000e+00, float 1.500000e+00>
 ; VEC4_INTERL1-NEXT:    br label %vector.body
 ; VEC4_INTERL1:       vector.body:
 ; VEC4_INTERL1-NEXT:    [[INDEX:%.*]] = phi i64 [ 0, %vector.ph ], [ [[INDEX_NEXT:%.*]], %vector.body ]
 ; VEC4_INTERL1-NEXT:    [[VEC_IND:%.*]] = phi <4 x float> [ [[INDUCTION2]], %vector.ph ], [ [[VEC_IND_NEXT:%.*]], %vector.body ]
 ; VEC4_INTERL1-NEXT:    [[TMP7:%.*]] = getelementptr inbounds float, float* %A, i64 [[INDEX]]
 ; VEC4_INTERL1-NEXT:    [[TMP8:%.*]] = bitcast float* [[TMP7]] to <4 x float>*

 ;    C[i] = y;
 ;  }
 ;}
 
 ; VEC4_INTERL1-LABEL: @fp_iv_loop3(
 ; VEC4_INTERL1:       for.body.lr.ph:
 ; VEC4_INTERL1:         [[TMP0:%.*]] = load float, float* @fp_inc, align 4
 ; VEC4_INTERL1:       vector.ph:
-; VEC4_INTERL1-NEXT:    [[DOTSPLATINSERT:%.*]] = insertelement <4 x float> undef, float %init, i32 0
+; VEC4_INTERL1:         [[DOTSPLATINSERT:%.*]] = insertelement <4 x float> undef, float %init, i32 0
 ; VEC4_INTERL1-NEXT:    [[DOTSPLAT:%.*]] = shufflevector <4 x float> [[DOTSPLATINSERT]], <4 x float> undef, <4 x i32> zeroinitializer
 ; VEC4_INTERL1-NEXT:    [[DOTSPLATINSERT5:%.*]] = insertelement <4 x float> undef, float [[TMP0]], i32 0
 ; VEC4_INTERL1-NEXT:    [[DOTSPLAT6:%.*]] = shufflevector <4 x float> [[DOTSPLATINSERT5]], <4 x float> undef, <4 x i32> zeroinitializer
 ; VEC4_INTERL1-NEXT:    [[TMP7:%.*]] = fmul fast <4 x float> [[DOTSPLAT6]], <float 0.000000e+00, float 1.000000e+00, float 2.000000e+00, float 3.000000e+00>
 ; VEC4_INTERL1-NEXT:    [[INDUCTION7:%.*]] = fadd fast <4 x float> [[DOTSPLAT]], [[TMP7]]
 ; VEC4_INTERL1-NEXT:    [[TMP8:%.*]] = fmul fast float [[TMP0]], 4.000000e+00
 ; VEC4_INTERL1-NEXT:    [[DOTSPLATINSERT8:%.*]] = insertelement <4 x float> undef, float [[TMP8]], i32 0
 ; VEC4_INTERL1-NEXT:    [[DOTSPLAT9:%.*]] = shufflevector <4 x float> [[DOTSPLATINSERT8]], <4 x float> undef, <4 x i32> zeroinitializer

 ;  for (int i=0; i < N; ++i) {
 ;    A[i] = x;
 ;    x += 0.5;
 ;  }
 ;}
 
 ; VEC4_INTERL1-LABEL: @fp_iv_loop4(
 ; VEC4_INTERL1:       vector.ph:
-; VEC4_INTERL1-NEXT:    br label %vector.body
+; VEC4_INTERL1:         br label %vector.body
 ; VEC4_INTERL1:       vector.body:
 ; VEC4_INTERL1-NEXT:    [[INDEX:%.*]] = phi i64 [ 0, %vector.ph ], [ [[INDEX_NEXT:%.*]], %vector.body ]
 ; VEC4_INTERL1-NEXT:    [[VEC_IND:%.*]] = phi <4 x float> [ <float 1.000000e+00, float 1.500000e+00, float 2.000000e+00, float 2.500000e+00>, %vector.ph ], [ [[VEC_IND_NEXT:%.*]], %vector.body ]
 ; VEC4_INTERL1-NEXT:    [[TMP7:%.*]] = getelementptr inbounds float, float* %A, i64 [[INDEX]]
 ; VEC4_INTERL1-NEXT:    [[TMP8:%.*]] = bitcast float* [[TMP7]] to <4 x float>*
 ; VEC4_INTERL1-NEXT:    store <4 x float> [[VEC_IND]], <4 x float>* [[TMP8]], align 4
 ; VEC4_INTERL1-NEXT:    [[INDEX_NEXT]] = add i64 [[INDEX]], 4
 ; VEC4_INTERL1-NEXT:    [[VEC_IND_NEXT]] = fadd fast <4 x float> [[VEC_IND]], <float 2.000000e+00, float 2.000000e+00, float 2.000000e+00, float 2.000000e+00>
for.end.loopexit:                                 ; preds = %for.body
   br label %for.end
 
 for.end:                                          ; preds = %for.end.loopexit, %entry
   ret void
 }
 
 ; VEC2_INTERL1_PRED_STORE-LABEL: @non_primary_iv_float_scalar(
 ; VEC2_INTERL1_PRED_STORE:       vector.body:
-; VEC2_INTERL1_PRED_STORE-NEXT:    [[INDEX:%.*]] = phi i64 [ [[INDEX_NEXT:%.*]], %[[PRED_STORE_CONTINUE7:.*]] ], [ 0, %min.iters.checked ]
+; VEC2_INTERL1_PRED_STORE-NEXT:    [[INDEX:%.*]] = phi i64 [ 0, %vector.ph ], [ [[INDEX_NEXT:%.*]], %[[PRED_STORE_CONTINUE7:.*]] ]
 ; VEC2_INTERL1_PRED_STORE-NEXT:    [[TMP1:%.*]] = sitofp i64 [[INDEX]] to float
 ; VEC2_INTERL1_PRED_STORE-NEXT:    [[TMP2:%.*]] = getelementptr inbounds float, float* %A, i64 [[INDEX]]
 ; VEC2_INTERL1_PRED_STORE-NEXT:    [[TMP3:%.*]] = bitcast float* [[TMP2]] to <2 x float>*
 ; VEC2_INTERL1_PRED_STORE-NEXT:    [[WIDE_LOAD:%.*]] = load <2 x float>, <2 x float>* [[TMP3]], align 4
 ; VEC2_INTERL1_PRED_STORE-NEXT:    [[TMP4:%.*]] = fcmp fast oeq <2 x float> [[WIDE_LOAD]], zeroinitializer
 ; VEC2_INTERL1_PRED_STORE-NEXT:    [[TMP5:%.*]] = extractelement <2 x i1> [[TMP4]], i32 0
 ; VEC2_INTERL1_PRED_STORE-NEXT:    br i1 [[TMP5]], label %[[PRED_STORE_IF:.*]], label %[[PRED_STORE_CONTINUE:.*]]
 ; VEC2_INTERL1_PRED_STORE:       [[PRED_STORE_IF]]:

test/Transforms/LoopVectorize/induction-step.ll

 ;  }
 ;  return x;
 ;}
 
 ; CHECK-LABEL: @induction_with_global(
 ; CHECK:       for.body.lr.ph:
 ; CHECK-NEXT:    [[TMP0:%.*]] = load i32, i32* @int_inc, align 4
 ; CHECK:       vector.ph:
-; CHECK-NEXT:    [[DOTSPLATINSERT:%.*]] = insertelement <8 x i32> undef, i32 %init, i32 0
+; CHECK:         [[DOTSPLATINSERT:%.*]] = insertelement <8 x i32> undef, i32 %init, i32 0
 ; CHECK-NEXT:    [[DOTSPLAT:%.*]] = shufflevector <8 x i32> [[DOTSPLATINSERT]], <8 x i32> undef, <8 x i32> zeroinitializer
 ; CHECK-NEXT:    [[DOTSPLATINSERT2:%.*]] = insertelement <8 x i32> undef, i32 [[TMP0]], i32 0
 ; CHECK-NEXT:    [[DOTSPLAT3:%.*]] = shufflevector <8 x i32> [[DOTSPLATINSERT2]], <8 x i32> undef, <8 x i32> zeroinitializer
 ; CHECK-NEXT:    [[TMP6:%.*]] = mul <8 x i32> <i32 0, i32 1, i32 2, i32 3, i32 4, i32 5, i32 6, i32 7>, [[DOTSPLAT3]]
 ; CHECK-NEXT:    [[INDUCTION4:%.*]] = add <8 x i32> [[DOTSPLAT]], [[TMP6]]
 ; CHECK-NEXT:    [[TMP7:%.*]] = mul i32 [[TMP0]], 8
 ; CHECK-NEXT:    [[DOTSPLATINSERT5:%.*]] = insertelement <8 x i32> undef, i32 [[TMP7]], i32 0
 ; CHECK-NEXT:    [[DOTSPLAT6:%.*]] = shufflevector <8 x i32> [[DOTSPLATINSERT5]], <8 x i32> undef, <8 x i32> zeroinitializer

 ;      x += j; // induction step is a loop invariant variable
 ;    }
 ;  }
 ;  return x;
 ;}
 
 ; CHECK-LABEL: @induction_with_loop_inv(
 ; CHECK:       vector.ph:
-; CHECK-NEXT:    [[DOTSPLATINSERT:%.*]] = insertelement <8 x i32> undef, i32 %x.011, i32 0
+; CHECK:         [[DOTSPLATINSERT:%.*]] = insertelement <8 x i32> undef, i32 %x.011, i32 0
 ; CHECK-NEXT:    [[DOTSPLAT:%.*]] = shufflevector <8 x i32> [[DOTSPLATINSERT]], <8 x i32> undef, <8 x i32> zeroinitializer
 ; CHECK-NEXT:    [[DOTSPLATINSERT2:%.*]] = insertelement <8 x i32> undef, i32 %j.012, i32 0
 ; CHECK-NEXT:    [[DOTSPLAT3:%.*]] = shufflevector <8 x i32> [[DOTSPLATINSERT2]], <8 x i32> undef, <8 x i32> zeroinitializer
 ; CHECK-NEXT:    [[TMP4:%.*]] = mul <8 x i32> <i32 0, i32 1, i32 2, i32 3, i32 4, i32 5, i32 6, i32 7>, [[DOTSPLAT3]]
 ; CHECK-NEXT:    [[INDUCTION4:%.*]] = add <8 x i32> [[DOTSPLAT]], [[TMP4]]
 ; CHECK-NEXT:    [[TMP5:%.*]] = mul i32 %j.012, 8
 ; CHECK-NEXT:    [[DOTSPLATINSERT5:%.*]] = insertelement <8 x i32> undef, i32 [[TMP5]], i32 0
 ; CHECK-NEXT:    [[DOTSPLAT6:%.*]] = shufflevector <8 x i32> [[DOTSPLATINSERT5]], <8 x i32> undef, <8 x i32> zeroinitializer

test/Transforms/LoopVectorize/induction.ll

 ; <label>:5                                       ; preds = %1
   ret i32 %2
 }
 
 ; This loop has a backedge taken count of i32_max. We need to check for this
 ; condition and branch directly to the scalar loop.
 
 ; CHECK-LABEL: max_i32_backedgetaken
-; CHECK:  br i1 true, label %scalar.ph, label %min.iters.checked
+; CHECK:  br i1 true, label %scalar.ph, label %vector.ph
 
 ; CHECK: middle.block:
 ; CHECK:  %[[v9:.+]] = extractelement <2 x i32> %bin.rdx, i32 0
 ; CHECK: scalar.ph:
 ; CHECK:  %bc.resume.val = phi i32 [ 0, %middle.block ], [ 0, %[[v0:.+]] ]
-; CHECK:  %bc.merge.rdx = phi i32 [ 1, %[[v0:.+]] ], [ 1, %min.iters.checked ], [ %[[v9]], %middle.block ]
+; CHECK:  %bc.merge.rdx = phi i32 [ 1, %[[v0:.+]] ], [ %[[v9]], %middle.block ]
 
 define i32 @max_i32_backedgetaken() nounwind readnone ssp uwtable {
 
   br label %1
 
 ; <label>:1                                       ; preds = %1, %0
   %a.0 = phi i32 [ 1, %0 ], [ %2, %1 ]
   %b.0 = phi i32 [ 0, %0 ], [ %3, %1 ]

test/Transforms/LoopVectorize/interleaved-accesses-pred-stores.ll

 ; RUN: opt -S -loop-vectorize -instcombine -force-vector-width=2 -force-vector-interleave=1 -enable-interleaved-mem-accesses < %s | FileCheck %s
 
 target datalayout = "e-m:e-i64:64-i128:128-n32:64-S128"
 %pair = type { i64, i64 }
 
 ; Ensure that we vectorize the interleaved load group even though the loop
 ; contains a conditional store. The store group contains gaps and is not
 ; vectorized.
 ;
 ; CHECK-LABEL: @interleaved_with_cond_store_0(
 ;
-; CHECK: min.iters.checked
+; CHECK: vector.ph
 ; CHECK:   %n.mod.vf = and i64 %[[N:.+]], 1
 ; CHECK:   %[[IsZero:[a-zA-Z0-9]+]] = icmp eq i64 %n.mod.vf, 0
 ; CHECK:   %[[R:.+]] = select i1 %[[IsZero]], i64 2, i64 %n.mod.vf
 ; CHECK:   %n.vec = sub nsw i64 %[[N]], %[[R]]
 ;
 ; CHECK: vector.body:
 ; CHECK:   %wide.vec = load <4 x i64>, <4 x i64>* %{{.*}}
 ; CHECK:   %strided.vec = shufflevector <4 x i64> %wide.vec, <4 x i64> undef, <2 x i32> <i32 0, i32 2>

 
 ; Ensure that we don't form a single interleaved group for the two loads. The
 ; conditional store prevents the second load from being hoisted. The two load
 ; groups are separately vectorized. The store group contains gaps and is not
 ; vectorized.
 ;
 ; CHECK-LABEL: @interleaved_with_cond_store_1(
 ;
-; CHECK: min.iters.checked
+; CHECK: vector.ph
 ; CHECK:   %n.mod.vf = and i64 %[[N:.+]], 1
 ; CHECK:   %[[IsZero:[a-zA-Z0-9]+]] = icmp eq i64 %n.mod.vf, 0
 ; CHECK:   %[[R:.+]] = select i1 %[[IsZero]], i64 2, i64 %n.mod.vf
 ; CHECK:   %n.vec = sub nsw i64 %[[N]], %[[R]]
 ;
 ; CHECK: vector.body:
 ; CHECK:   %[[L1:.+]] = load <4 x i64>, <4 x i64>* %{{.*}}
 ; CHECK:   %strided.vec = shufflevector <4 x i64> %[[L1]], <4 x i64> undef, <2 x i32> <i32 0, i32 2>

 
 ; Ensure that we don't create a single interleaved group for the two stores.
 ; The second store is conditional and we can't sink the first store inside the
 ; predicated block. The load group is vectorized, and the store groups contain
 ; gaps and are not vectorized.
 ;
 ; CHECK-LABEL: @interleaved_with_cond_store_2(
 ;
-; CHECK: min.iters.checked
+; CHECK: vector.ph
 ; CHECK:   %n.mod.vf = and i64 %[[N:.+]], 1
 ; CHECK:   %[[IsZero:[a-zA-Z0-9]+]] = icmp eq i64 %n.mod.vf, 0
 ; CHECK:   %[[R:.+]] = select i1 %[[IsZero]], i64 2, i64 %n.mod.vf
 ; CHECK:   %n.vec = sub nsw i64 %[[N]], %[[R]]
 ;
 ; CHECK: vector.body:
 ; CHECK:   %[[L1:.+]] = load <4 x i64>, <4 x i64>* %{{.*}}
 ; CHECK:   %strided.vec = shufflevector <4 x i64> %[[L1]], <4 x i64> undef, <2 x i32> <i32 0, i32 2>

test/Transforms/LoopVectorize/interleaved-accesses.ll

 ; iteration of the scalar loop.
 
 ; void even_load_dynamic_tc(int *A, int *B, unsigned N) {
 ;  for (unsigned i = 0; i < N; i+=2)
 ;     B[i/2] = A[i] * 2;
 ; }
 
 ; CHECK-LABEL: @even_load_dynamic_tc(
-; CHECK: min.iters.checked:
+; CHECK: vector.ph:
 ; CHECK:   %n.mod.vf = and i64 %[[N:[a-zA-Z0-9]+]], 3
 ; CHECK:   %[[IsZero:[a-zA-Z0-9]+]] = icmp eq i64 %n.mod.vf, 0
 ; CHECK:   %[[R:[a-zA-Z0-9]+]] = select i1 %[[IsZero]], i64 4, i64 %n.mod.vf
 ; CHECK:   %n.vec = sub i64 %[[N]], %[[R]]
 ; CHECK: vector.body:
 ; CHECK:   %wide.vec = load <8 x i32>, <8 x i32>* %{{.*}}, align 4
 ; CHECK:   %strided.vec = shufflevector <8 x i32> %wide.vec, <8 x i32> undef, <4 x i32> <i32 0, i32 2, i32 4, i32 6>
 ; CHECK:   icmp eq i64 %index.next, %n.vec

 ; void PR27626_0(struct pair *p, int z, int n) {
 ;   for (int i = 0; i < n; i++) {
 ;     p[i].x = z;
 ;     p[i].y = p[i].x;
 ;   }
 ; }
 
 ; CHECK-LABEL: @PR27626_0(
-; CHECK: min.iters.checked:
+; CHECK: vector.ph:
 ; CHECK:   %n.mod.vf = and i64 %[[N:.+]], 3
 ; CHECK:   %[[IsZero:[a-zA-Z0-9]+]] = icmp eq i64 %n.mod.vf, 0
 ; CHECK:   %[[R:[a-zA-Z0-9]+]] = select i1 %[[IsZero]], i64 4, i64 %n.mod.vf
 ; CHECK:   %n.vec = sub nsw i64 %[[N]], %[[R]]
 ; CHECK: vector.body:
 ; CHECK:   %[[L1:.+]] = load <8 x i32>, <8 x i32>* {{.*}}
 ; CHECK:   %[[X1:.+]] = extractelement <8 x i32> %[[L1]], i32 0
 ; CHECK:   store i32 %[[X1]], {{.*}}

 ;   int s = 0;
 ;   for (int i = 0; i < n; i++) {
 ;     p[i].y = p[i].x;
 ;     s += p[i].y
 ;   }
 ; }
 
 ; CHECK-LABEL: @PR27626_1(
-; CHECK: min.iters.checked:
+; CHECK: vector.ph:
 ; CHECK:   %n.mod.vf = and i64 %[[N:.+]], 3
 ; CHECK:   %[[IsZero:[a-zA-Z0-9]+]] = icmp eq i64 %n.mod.vf, 0
 ; CHECK:   %[[R:[a-zA-Z0-9]+]] = select i1 %[[IsZero]], i64 4, i64 %n.mod.vf
 ; CHECK:   %n.vec = sub nsw i64 %[[N]], %[[R]]
 ; CHECK: vector.body:
 ; CHECK:   %[[Phi:.+]] = phi <4 x i32> [ zeroinitializer, %vector.ph ], [ {{.*}}, %vector.body ]
 ; CHECK:   %[[L1:.+]] = load <8 x i32>, <8 x i32>* {{.*}}
 ; CHECK:   %[[X1:.+]] = extractelement <8 x i32> %[[L1:.+]], i32 0

 ; void PR27626_2(struct pair *p, int z, int n) {
 ;   for (int i = 0; i < n; i++) {
 ;     p[i].x = z;
 ;     p[i].y = p[i - 1].x;
 ;   }
 ; }
 
 ; CHECK-LABEL: @PR27626_2(
-; CHECK: min.iters.checked:
+; CHECK: vector.ph:
 ; CHECK:   %n.mod.vf = and i64 %[[N:.+]], 3
 ; CHECK:   %[[IsZero:[a-zA-Z0-9]+]] = icmp eq i64 %n.mod.vf, 0
 ; CHECK:   %[[R:[a-zA-Z0-9]+]] = select i1 %[[IsZero]], i64 4, i64 %n.mod.vf
 ; CHECK:   %n.vec = sub nsw i64 %[[N]], %[[R]]
 ; CHECK: vector.body:
 ; CHECK:   %[[L1:.+]] = load <8 x i32>, <8 x i32>* {{.*}}
 ; CHECK:   %[[X1:.+]] = extractelement <8 x i32> %[[L1]], i32 0
 ; CHECK:   store i32 %[[X1]], {{.*}}

 ; void PR27626_3(struct pair *p, int z, int n) {
 ;   for (int i = 0; i < n; i++) {
 ;     p[i + 1].y = p[i].x;
 ;     s += p[i].y;
 ;   }
 ; }
 
 ; CHECK-LABEL: @PR27626_3(
-; CHECK: min.iters.checked:
+; CHECK: vector.ph:
 ; CHECK:   %n.mod.vf = and i64 %[[N:.+]], 3
 ; CHECK:   %[[IsZero:[a-zA-Z0-9]+]] = icmp eq i64 %n.mod.vf, 0
 ; CHECK:   %[[R:[a-zA-Z0-9]+]] = select i1 %[[IsZero]], i64 4, i64 %n.mod.vf
 ; CHECK:   %n.vec = sub nsw i64 %[[N]], %[[R]]
 ; CHECK: vector.body:
 ; CHECK:   %[[Phi:.+]] = phi <4 x i32> [ zeroinitializer, %vector.ph ], [ {{.*}}, %vector.body ]
 ; CHECK:   %[[L1:.+]] = load <8 x i32>, <8 x i32>* {{.*}}
 ; CHECK:   %[[X1:.+]] = extractelement <8 x i32> %[[L1:.+]], i32 0

test/Transforms/LoopVectorize/iv_outside_user.ll

 for.end:
   %phi = phi i32 [ %inc, %for.body ]
   %phi2 = phi i32 [ %inc, %for.body ]
   store i32 %phi2, i32* %p
   ret i32 %phi
 }
 
 ; CHECK-LABEL: @PR30742
-; CHECK: min.iters.checked
+; CHECK: vector.ph
 ; CHECK:   %[[N_MOD_VF:.+]] = urem i32 %[[T5:.+]], 2
 ; CHECK:   %[[N_VEC:.+]] = sub i32 %[[T5]], %[[N_MOD_VF]]
 ; CHECK: middle.block
 ; CHECK:   %[[CMP:.+]] = icmp eq i32 %[[T5]], %[[N_VEC]]
 ; CHECK:   %[[T15:.+]] = add i32 %tmp03, -7
 ; CHECK:   %[[T16:.+]] = shl i32 %[[N_MOD_VF]], 3
 ; CHECK:   %[[T17:.+]] = add i32 %[[T15]], %[[T16]]
 ; CHECK:   %[[T18:.+]] = shl i32 {{.*}}, 3

test/Transforms/LoopVectorize/miniters.ll

 ; RUN: opt %s -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -S | FileCheck %s
 ; RUN: opt %s -loop-vectorize -force-vector-interleave=2 -force-vector-width=4 -S | FileCheck %s -check-prefix=UNROLL
 
 target datalayout = "e-m:e-i64:64-f80:128-n8:16:32:64-S128"
 
 @b = common global [1000 x i32] zeroinitializer, align 16
 @c = common global [1000 x i32] zeroinitializer, align 16
 @a = common global [1000 x i32] zeroinitializer, align 16
 
 ; Generate min.iters.check to skip the vector loop and jump to scalar.ph directly when loop iteration number is less than VF * UF.
 ; CHECK-LABEL: foo(
 ; CHECK: %min.iters.check = icmp ult i64 %N, 4
-; CHECK: br i1 %min.iters.check, label %scalar.ph, label %min.iters.checked
+; CHECK: br i1 %min.iters.check, label %scalar.ph, label %vector.ph
 ; UNROLL-LABEL: foo(
 ; UNROLL: %min.iters.check = icmp ult i64 %N, 8
-; UNROLL: br i1 %min.iters.check, label %scalar.ph, label %min.iters.checked
+; UNROLL: br i1 %min.iters.check, label %scalar.ph, label %vector.ph
 
 define void @foo(i64 %N) {
 entry:
   %cmp.8 = icmp sgt i64 %N, 0
   br i1 %cmp.8, label %for.body.preheader, label %for.end
 
 for.body.preheader:                               ; preds = %entry
   br label %for.body

test/Transforms/LoopVectorize/runtime-check-readonly.ll

 ; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 
 ;CHECK-LABEL: @add_ints(
 ;CHECK: br
-;CHECK: br
 ;CHECK: getelementptr
 ;CHECK-DAG: getelementptr
 ;CHECK-DAG: icmp ugt
 ;CHECK-DAG: icmp ugt
 ;CHECK-DAG: icmp ugt
 ;CHECK-DAG: icmp ugt
 ;CHECK-DAG: and
 ;CHECK-DAG: and

test/Transforms/LoopVectorize/runtime-check.ll

 ; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 
 ; Make sure we vectorize this loop:
 ; int foo(float *a, float *b, int n) {
 ;   for (int i=0; i<n; ++i)
 ;     a[i] = b[i] * 3;
 ; }
 
 ;CHECK-LABEL: define i32 @foo
 ;CHECK: for.body.preheader:
-;CHECK: br i1 %cmp.zero, label %scalar.ph, label %vector.memcheck, !dbg [[BODY_LOC:![0-9]+]]
+;CHECK: br i1 %min.iters.check, label %scalar.ph, label %vector.memcheck, !dbg [[BODY_LOC:![0-9]+]]
 ;CHECK: vector.memcheck:
 ;CHECK: br i1 %memcheck.conflict, label %scalar.ph, label %vector.ph, !dbg [[BODY_LOC]]
 ;CHECK: load <4 x float>
 define i32 @foo(float* nocapture %a, float* nocapture %b, i32 %n) nounwind uwtable ssp {
 entry:
   %cmp6 = icmp sgt i32 %n, 0, !dbg !6
   br i1 %cmp6, label %for.body, label %for.end, !dbg !6