This is an archive of the discontinued LLVM Phabricator instance.

Differential D3887

[COMPILER-RT] refactoring extendsfdf2.c
ClosedPublic

Authored by koviankevin on May 23 2014, 1:09 AM.

Details

Reviewers
joerg
Commits
rG7610e8c82288: Refactor extendsfdf2.
rCRT209781: Refactor extendsfdf2.
rL209781: Refactor extendsfdf2.

Diff Detail

Repository
rL LLVM

Event Timeline

koviankevin updated this revision to Diff 9736.May 23 2014, 1:09 AM
koviankevin retitled this revision from to [COMPILER-RT] refactoring extendsfdf2.c.
koviankevin updated this object.
koviankevin edited the test plan for this revision. (Show Details)
koviankevin added subscribers: Unknown Object (MLST), joerg.
joerg accepted this revision.May 23 2014, 4:52 AM
joerg added a reviewer: joerg.
This revision is now accepted and ready to land.May 23 2014, 4:52 AM
joerg closed this revision.May 28 2014, 6:02 PM
joerg updated this revision to Diff 9898.

Closed by commit rL209781 (authored by @joerg).

Revision Contents

PathSize
compiler-rt/
trunk/
lib/
builtins/
129 lines
76 lines
106 lines

Diff 9898

compiler-rt/trunk/lib/builtins/extendsfdf2.c

//===-- lib/extendsfdf2.c - single -> double conversion -----------*- C -*-===// //===-- lib/extendsfdf2.c - single -> double conversion -----------*- C -*-===//
// //
// The LLVM Compiler Infrastructure // The LLVM Compiler Infrastructure
// //
// This file is dual licensed under the MIT and the University of Illinois Open // This file is dual licensed under the MIT and the University of Illinois Open
// Source Licenses. See LICENSE.TXT for details. // Source Licenses. See LICENSE.TXT for details.
// //
//===----------------------------------------------------------------------===// //===----------------------------------------------------------------------===//
// //
// This file implements a fairly generic conversion from a narrower to a wider
// IEEE-754 floating-point type. The constants and types defined following the
// includes below parameterize the conversion.
//
// This routine can be trivially adapted to support conversions from
// half-precision or to quad-precision. It does not support types that don't
// use the usual IEEE-754 interchange formats; specifically, some work would be
// needed to adapt it to (for example) the Intel 80-bit format or PowerPC
// double-double format.
//
// Note please, however, that this implementation is only intended to support
// *widening* operations; if you need to convert to a *narrower* floating-point
// type (e.g. double -> float), then this routine will not do what you want it
// to.
//
// It also requires that integer types at least as large as both formats
// are available on the target platform; this may pose a problem when trying
// to add support for quad on some 32-bit systems, for example. You also may
// run into trouble finding an appropriate CLZ function for wide source types;
// you will likely need to roll your own on some platforms.
//
// Finally, the following assumptions are made:
//
// 1. floating-point types and integer types have the same endianness on the
// target platform
//
// 2. quiet NaNs, if supported, are indicated by the leading bit of the
// significand field being set
//
//===----------------------------------------------------------------------===//
#include "int_lib.h"
typedef float src_t;
typedef uint32_t src_rep_t;
#define SRC_REP_C UINT32_C
static const int srcSigBits = 23;
#define src_rep_t_clz __builtin_clz
typedef double dst_t;
typedef uint64_t dst_rep_t;
#define DST_REP_C UINT64_C
static const int dstSigBits = 52;
// End of specialization parameters. Two helper routines for conversion to and
// from the representation of floating-point data as integer values follow.
static inline src_rep_t srcToRep(src_t x) {
const union { src_t f; src_rep_t i; } rep = {.f = x};
return rep.i;
}
static inline dst_t dstFromRep(dst_rep_t x) {
const union { dst_t f; dst_rep_t i; } rep = {.i = x};
return rep.f;
}
// End helper routines. Conversion implementation follows. #define SRC_SINGLE
#define DST_DOUBLE
#include "fp_extend_impl.inc"
ARM_EABI_FNALIAS(f2d, extendsfdf2) ARM_EABI_FNALIAS(f2d, extendsfdf2)
COMPILER_RT_ABI dst_t COMPILER_RT_ABI double __extendsfdf2(float a) {
__extendsfdf2(src_t a) { return __extendXfYf2__(a);
// Various constants whose values follow from the type parameters.
// Any reasonable optimizer will fold and propagate all of these.
const int srcBits = sizeof(src_t)*CHAR_BIT;
const int srcExpBits = srcBits - srcSigBits - 1;
const int srcInfExp = (1 << srcExpBits) - 1;
const int srcExpBias = srcInfExp >> 1;
const src_rep_t srcMinNormal = SRC_REP_C(1) << srcSigBits;
const src_rep_t srcInfinity = (src_rep_t)srcInfExp << srcSigBits;
const src_rep_t srcSignMask = SRC_REP_C(1) << (srcSigBits + srcExpBits);
const src_rep_t srcAbsMask = srcSignMask - 1;
const src_rep_t srcQNaN = SRC_REP_C(1) << (srcSigBits - 1);
const src_rep_t srcNaNCode = srcQNaN - 1;
const int dstBits = sizeof(dst_t)*CHAR_BIT;
const int dstExpBits = dstBits - dstSigBits - 1;
const int dstInfExp = (1 << dstExpBits) - 1;
const int dstExpBias = dstInfExp >> 1;
const dst_rep_t dstMinNormal = DST_REP_C(1) << dstSigBits;
// Break a into a sign and representation of the absolute value
const src_rep_t aRep = srcToRep(a);
const src_rep_t aAbs = aRep & srcAbsMask;
const src_rep_t sign = aRep & srcSignMask;
dst_rep_t absResult;
if (aAbs - srcMinNormal < srcInfinity - srcMinNormal) {
// a is a normal number.
// Extend to the destination type by shifting the significand and
// exponent into the proper position and rebiasing the exponent.
absResult = (dst_rep_t)aAbs << (dstSigBits - srcSigBits);
absResult += (dst_rep_t)(dstExpBias - srcExpBias) << dstSigBits;
}
else if (aAbs >= srcInfinity) {
// a is NaN or infinity.
// Conjure the result by beginning with infinity, then setting the qNaN
// bit (if needed) and right-aligning the rest of the trailing NaN
// payload field.
absResult = (dst_rep_t)dstInfExp << dstSigBits;
absResult |= (dst_rep_t)(aAbs & srcQNaN) << (dstSigBits - srcSigBits);
absResult |= aAbs & srcNaNCode;
}
else if (aAbs) {
// a is denormal.
// renormalize the significand and clear the leading bit, then insert
// the correct adjusted exponent in the destination type.
const int scale = src_rep_t_clz(aAbs) - src_rep_t_clz(srcMinNormal);
absResult = (dst_rep_t)aAbs << (dstSigBits - srcSigBits + scale);
absResult ^= dstMinNormal;
const int resultExponent = dstExpBias - srcExpBias - scale + 1;
absResult |= (dst_rep_t)resultExponent << dstSigBits;
}
else {
// a is zero.
absResult = 0;
}
// Apply the signbit to (dst_t)abs(a).
const dst_rep_t result = absResult | (dst_rep_t)sign << (dstBits - srcBits);
return dstFromRep(result);
} }

compiler-rt/trunk/lib/builtins/fp_extend.h

//===-lib/fp_extend.h - low precision -> high precision conversion -*- C -*-===//
//
// The LLVM Compiler Infrastructure
//
// This file is dual licensed under the MIT and the University of Illinois Open
// Source Licenses. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// Set source and destination setting
//
//===----------------------------------------------------------------------===//
#ifndef FP_EXTEND_HEADER
#define FP_EXTEND_HEADER
#include "int_lib.h"
#if defined SRC_SINGLE
typedef float src_t;
typedef uint32_t src_rep_t;
#define SRC_REP_C UINT32_C
static const int srcSigBits = 23;
#define src_rep_t_clz __builtin_clz
#elif defined SRC_DOUBLE
typedef double src_t;
typedef uint64_t src_rep_t;
#define SRC_REP_C UINT64_C
static const int srcSigBits = 52;
static inline int src_rep_t_clz(src_rep_t a) {
#if defined __LP64__
return __builtin_clzl(a);
#else
if (a & REP_C(0xffffffff00000000))
return __builtin_clz(a >> 32);
else
return 32 + __builtin_clz(a & REP_C(0xffffffff));
#endif
}
#else
#error Source should be single precision or double precision!
#endif //end source precision
#if defined DST_DOUBLE
typedef double dst_t;
typedef uint64_t dst_rep_t;
#define DST_REP_C UINT64_C
static const int dstSigBits = 52;
#elif defined DST_QUAD
typedef long double dst_t;
typedef __uint128_t dst_rep_t;
#define DST_REP_C (__uint128_t)
static const int dstSigBits = 112;
#else
#error Destination should be double precision or quad precision!
#endif //end destination precision
// End of specialization parameters. Two helper routines for conversion to and
// from the representation of floating-point data as integer values follow.
static inline src_rep_t srcToRep(src_t x) {
const union { src_t f; src_rep_t i; } rep = {.f = x};
return rep.i;
}
static inline dst_t dstFromRep(dst_rep_t x) {
const union { dst_t f; dst_rep_t i; } rep = {.i = x};
return rep.f;
}
// End helper routines. Conversion implementation follows.
#endif //FP_EXTEND_HEADER

compiler-rt/trunk/lib/builtins/fp_extend_impl.inc

//=-lib/fp_extend_impl.inc - low precision -> high precision conversion -*-- -//
//
// The LLVM Compiler Infrastructure
//
// This file is dual licensed under the MIT and the University of Illinois Open
// Source Licenses. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file implements a fairly generic conversion from a narrower to a wider
// IEEE-754 floating-point type. The constants and types defined following the
// includes below parameterize the conversion.
//
// It does not support types that don't use the usual IEEE-754 interchange
// formats; specifically, some work would be needed to adapt it to
// (for example) the Intel 80-bit format or PowerPC double-double format.
//
// Note please, however, that this implementation is only intended to support
// *widening* operations; if you need to convert to a *narrower* floating-point
// type (e.g. double -> float), then this routine will not do what you want it
// to.
//
// It also requires that integer types at least as large as both formats
// are available on the target platform; this may pose a problem when trying
// to add support for quad on some 32-bit systems, for example. You also may
// run into trouble finding an appropriate CLZ function for wide source types;
// you will likely need to roll your own on some platforms.
//
// Finally, the following assumptions are made:
//
// 1. floating-point types and integer types have the same endianness on the
// target platform
//
// 2. quiet NaNs, if supported, are indicated by the leading bit of the
// significand field being set
//
//===----------------------------------------------------------------------===//
#include "fp_extend.h"
static inline dst_t __extendXfYf2__(src_t a) {
// Various constants whose values follow from the type parameters.
// Any reasonable optimizer will fold and propagate all of these.
const int srcBits = sizeof(src_t)*CHAR_BIT;
const int srcExpBits = srcBits - srcSigBits - 1;
const int srcInfExp = (1 << srcExpBits) - 1;
const int srcExpBias = srcInfExp >> 1;
const src_rep_t srcMinNormal = SRC_REP_C(1) << srcSigBits;
const src_rep_t srcInfinity = (src_rep_t)srcInfExp << srcSigBits;
const src_rep_t srcSignMask = SRC_REP_C(1) << (srcSigBits + srcExpBits);
const src_rep_t srcAbsMask = srcSignMask - 1;
const src_rep_t srcQNaN = SRC_REP_C(1) << (srcSigBits - 1);
const src_rep_t srcNaNCode = srcQNaN - 1;
const int dstBits = sizeof(dst_t)*CHAR_BIT;
const int dstExpBits = dstBits - dstSigBits - 1;
const int dstInfExp = (1 << dstExpBits) - 1;
const int dstExpBias = dstInfExp >> 1;
const dst_rep_t dstMinNormal = DST_REP_C(1) << dstSigBits;
// Break a into a sign and representation of the absolute value
const src_rep_t aRep = srcToRep(a);
const src_rep_t aAbs = aRep & srcAbsMask;
const src_rep_t sign = aRep & srcSignMask;
dst_rep_t absResult;
if (aAbs - srcMinNormal < srcInfinity - srcMinNormal) {
// a is a normal number.
// Extend to the destination type by shifting the significand and
// exponent into the proper position and rebiasing the exponent.
absResult = (dst_rep_t)aAbs << (dstSigBits - srcSigBits);
absResult += (dst_rep_t)(dstExpBias - srcExpBias) << dstSigBits;
}
else if (aAbs >= srcInfinity) {
// a is NaN or infinity.
// Conjure the result by beginning with infinity, then setting the qNaN
// bit (if needed) and right-aligning the rest of the trailing NaN
// payload field.
absResult = (dst_rep_t)dstInfExp << dstSigBits;
absResult |= (dst_rep_t)(aAbs & srcQNaN) << (dstSigBits - srcSigBits);
absResult |= (dst_rep_t)(aAbs & srcNaNCode) << (dstSigBits - srcSigBits);
}
else if (aAbs) {
// a is denormal.
// renormalize the significand and clear the leading bit, then insert
// the correct adjusted exponent in the destination type.
const int scale = src_rep_t_clz(aAbs) - src_rep_t_clz(srcMinNormal);
absResult = (dst_rep_t)aAbs << (dstSigBits - srcSigBits + scale);
absResult ^= dstMinNormal;
const int resultExponent = dstExpBias - srcExpBias - scale + 1;
absResult |= (dst_rep_t)resultExponent << dstSigBits;
}
else {
// a is zero.
absResult = 0;
}
// Apply the signbit to (dst_t)abs(a).
const dst_rep_t result = absResult | (dst_rep_t)sign << (dstBits - srcBits);
return dstFromRep(result);
}