diff --git a/llvm/test/tools/llvm-objcopy/MachO/install-name-tool-prepend-rpath.test b/llvm/test/tools/llvm-objcopy/MachO/install-name-tool-prepend-rpath.test
new file mode 100644
--- /dev/null
+++ b/llvm/test/tools/llvm-objcopy/MachO/install-name-tool-prepend-rpath.test
@@ -0,0 +1,68 @@
+## This test checks prepending a new LC_RPATH load command to a MachO binary.
+
+# RUN: yaml2obj %p/Inputs/i386.yaml -o %t.i386
+# RUN: llvm-install-name-tool -add_rpath @executable_path/. %t.i386
+# RUN: llvm-install-name-tool -prepend_rpath first_rpath %t.i386
+# RUN: llvm-objdump -p %t.i386 | FileCheck --check-prefix=NEW-RPATH %s
+
+# RUN: yaml2obj %p/Inputs/x86_64.yaml -o %t.x86_64
+# RUN: llvm-install-name-tool -add_rpath @executable_path/. %t.x86_64
+# RUN: llvm-install-name-tool -prepend_rpath first_rpath %t.x86_64
+# RUN: llvm-objdump -p %t.x86_64 | FileCheck --check-prefix=NEW-RPATH %s
+
+# NEW-RPATH: cmd LC_RPATH
+# NEW-RPATH-NEXT: cmdsize
+# NEW-RPATH-NEXT: first_rpath
+
+# NEW-RPATH: cmd LC_RPATH
+# NEW-RPATH-NEXT: cmdsize
+# NEW-RPATH-NEXT: @executable_path/.
+
+## Prepend with dylib loads
+# RUN: yaml2obj %p/Inputs/strip-all.yaml -o %t.dylib
+# RUN: llvm-install-name-tool -prepend_rpath first_rpath %t.dylib
+# RUN: llvm-objdump -p %t.dylib | FileCheck --check-prefix=DYLIB %s
+
+# DYLIB: cmd LC_RPATH
+# DYLIB-NEXT: cmdsize
+# DYLIB-NEXT: first_rpath
+
+# RUN: not llvm-install-name-tool -prepend_rpath first_rpath %t.i386 2>&1 \
+# RUN: | FileCheck --check-prefix=DUPLICATE-RPATH %s
+
+# DUPLICATE-RPATH: duplicate load command
+
+# RUN: not llvm-install-name-tool -prepend_rpath @executable_path/. 2>&1 \
+# RUN: | FileCheck --check-prefix=NO-INPUT %s
+
+# NO-INPUT: no input file specified
+
+## Prepend same RPATH twice:
+# RUN: not llvm-install-name-tool -prepend_rpath @executable_X \
+# RUN:                            -prepend_rpath @executable_X %t.i386 2>&1 \
+# RUN: | FileCheck --check-prefix=DOUBLE %s
+
+# DOUBLE: duplicate load command
+
+## Prepend and delete RPATH:
+# RUN: not llvm-install-name-tool -prepend_rpath foo \
+# RUN:                            -delete_rpath foo %t.i386 2>&1 \
+# RUN: | FileCheck --check-prefix=DELETE %s
+
+# DELETE: cannot specify both -prepend_rpath foo and -delete_rpath foo
+
+## Prepend and id RPATH:
+# RUN: not llvm-install-name-tool -prepend_rpath foo \
+# RUN:                            -rpath foo bar %t.i386 2>&1 \
+# RUN: | FileCheck --check-prefix=ID %s
+
+# ID: cannot specify both -prepend_rpath foo and -rpath foo bar
+
+## Check that cmdsize accounts for NULL terminator.
+# RUN: yaml2obj %p/Inputs/x86_64.yaml -o %t.x86_64
+# RUN: llvm-install-name-tool -prepend_rpath abcd %t.x86_64
+# RUN: llvm-objdump -p %t.x86_64 | FileCheck %s --check-prefix=RPATH-SIZE
+
+# RPATH-SIZE: cmd LC_RPATH
+# RPATH-SIZE-NEXT: cmdsize 24
+# RPATH-SIZE-NEXT: path abcd
diff --git a/llvm/tools/llvm-objcopy/CopyConfig.h b/llvm/tools/llvm-objcopy/CopyConfig.h
--- a/llvm/tools/llvm-objcopy/CopyConfig.h
+++ b/llvm/tools/llvm-objcopy/CopyConfig.h
@@ -178,6 +178,7 @@
   std::vector<StringRef> DumpSection;
   std::vector<StringRef> SymbolsToAdd;
   std::vector<StringRef> RPathToAdd;
+  std::vector<StringRef> RPathToPrepend;
   DenseMap<StringRef, StringRef> RPathsToUpdate;
   DenseMap<StringRef, StringRef> InstallNamesToUpdate;
   DenseSet<StringRef> RPathsToRemove;
diff --git a/llvm/tools/llvm-objcopy/CopyConfig.cpp b/llvm/tools/llvm-objcopy/CopyConfig.cpp
--- a/llvm/tools/llvm-objcopy/CopyConfig.cpp
+++ b/llvm/tools/llvm-objcopy/CopyConfig.cpp
@@ -895,6 +895,9 @@
   for (auto Arg : InputArgs.filtered(INSTALL_NAME_TOOL_add_rpath))
     Config.RPathToAdd.push_back(Arg->getValue());
 
+  for (auto *Arg : InputArgs.filtered(INSTALL_NAME_TOOL_prepend_rpath))
+    Config.RPathToPrepend.push_back(Arg->getValue());
+
   for (auto Arg : InputArgs.filtered(INSTALL_NAME_TOOL_delete_rpath)) {
     StringRef RPath = Arg->getValue();
 
@@ -905,6 +908,13 @@
           "cannot specify both -add_rpath %s and -delete_rpath %s",
           RPath.str().c_str(), RPath.str().c_str());
 
+    // Cannot add and delete the same rpath at the same time.
+    if (is_contained(Config.RPathToPrepend, RPath))
+      return createStringError(
+          errc::invalid_argument,
+          "cannot specify both -prepend_rpath %s and -delete_rpath %s",
+          RPath.str().c_str(), RPath.str().c_str());
+
     Config.RPathsToRemove.insert(RPath);
   }
 
@@ -940,6 +950,13 @@
                                "cannot specify both -add_rpath " + *It3 +
                                    " and -rpath " + Old + " " + New);
 
+    // Cannot specify the same rpath under both -add_rpath and -rpath
+    auto It4 = find_if(Config.RPathToPrepend, Match);
+    if (It4 != Config.RPathToPrepend.end())
+      return createStringError(errc::invalid_argument,
+                               "cannot specify both -prepend_rpath " + *It4 +
+                                   " and -rpath " + Old + " " + New);
+
     Config.RPathsToUpdate.insert({Old, New});
   }
 
diff --git a/llvm/tools/llvm-objcopy/InstallNameToolOpts.td b/llvm/tools/llvm-objcopy/InstallNameToolOpts.td
--- a/llvm/tools/llvm-objcopy/InstallNameToolOpts.td
+++ b/llvm/tools/llvm-objcopy/InstallNameToolOpts.td
@@ -18,6 +18,9 @@
 def add_rpath : Option<["-", "--"], "add_rpath", KIND_SEPARATE>,
                 HelpText<"Add new rpath">;
 
+def prepend_rpath : Option<["-", "--"], "prepend_rpath", KIND_SEPARATE>,
+                    HelpText<"Prepend new rpath">;
+
 def delete_rpath: Option<["-", "--"], "delete_rpath", KIND_SEPARATE>,
                   HelpText<"Delete specified rpath">;
 
diff --git a/llvm/tools/llvm-objcopy/MachO/MachOObjcopy.cpp b/llvm/tools/llvm-objcopy/MachO/MachOObjcopy.cpp
--- a/llvm/tools/llvm-objcopy/MachO/MachOObjcopy.cpp
+++ b/llvm/tools/llvm-objcopy/MachO/MachOObjcopy.cpp
@@ -228,6 +228,20 @@
     Obj.LoadCommands.push_back(buildRPathLoadCommand(RPath));
   }
 
+  for (StringRef RPath : Config.RPathToPrepend) {
+    if (RPaths.count(RPath) != 0)
+      return createStringError(errc::invalid_argument,
+                               "rpath " + RPath +
+                                   " would create a duplicate load command");
+
+    RPaths.insert(RPath);
+    Obj.LoadCommands.insert(Obj.LoadCommands.begin(),
+                            buildRPathLoadCommand(RPath));
+  }
+
+  if (!Config.RPathToPrepend.empty())
+    Obj.updateLoadCommandIndexes();
+
   return Error::success();
 }