diff --git a/llvm/test/Analysis/MemorySSA/assume.ll b/llvm/test/Analysis/MemorySSA/assume.ll
--- a/llvm/test/Analysis/MemorySSA/assume.ll
+++ b/llvm/test/Analysis/MemorySSA/assume.ll
@@ -1,4 +1,4 @@
-; RUN: opt -basic-aa -memoryssa -analyze < %s 2>&1 | FileCheck %s
+; RUN: opt -basic-aa -memoryssa -enable-new-pm=0 -analyze < %s 2>&1 | FileCheck %s
 ; RUN: opt -aa-pipeline=basic-aa -passes='print<memoryssa>,verify<memoryssa>' -disable-output < %s 2>&1 | FileCheck %s
 ;
 ; Ensures that assumes are treated as not reading or writing memory.
diff --git a/llvm/test/Analysis/MemorySSA/atomic-clobber.ll b/llvm/test/Analysis/MemorySSA/atomic-clobber.ll
--- a/llvm/test/Analysis/MemorySSA/atomic-clobber.ll
+++ b/llvm/test/Analysis/MemorySSA/atomic-clobber.ll
@@ -1,4 +1,4 @@
-; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -analyze < %s 2>&1 | FileCheck %s
+; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -enable-new-pm=0 -analyze < %s 2>&1 | FileCheck %s
 ; RUN: opt -aa-pipeline=basic-aa -passes='print<memoryssa>,verify<memoryssa>' -disable-output < %s 2>&1 | FileCheck %s
 ;
 ; Ensures that atomic loads count as MemoryDefs
diff --git a/llvm/test/Analysis/MemorySSA/basicaa-memcpy.ll b/llvm/test/Analysis/MemorySSA/basicaa-memcpy.ll
--- a/llvm/test/Analysis/MemorySSA/basicaa-memcpy.ll
+++ b/llvm/test/Analysis/MemorySSA/basicaa-memcpy.ll
@@ -1,4 +1,4 @@
-; RUN: opt -disable-output -basic-aa -print-memoryssa %s 2>&1 | FileCheck %s
+; RUN: opt -disable-output -basic-aa -enable-new-pm=0 -print-memoryssa %s 2>&1 | FileCheck %s
 
 declare void @llvm.memcpy.p0i8.p0i8.i64(i8* nocapture, i8* nocapture, i64, i1) nounwind
 
diff --git a/llvm/test/Analysis/MemorySSA/constant-memory.ll b/llvm/test/Analysis/MemorySSA/constant-memory.ll
--- a/llvm/test/Analysis/MemorySSA/constant-memory.ll
+++ b/llvm/test/Analysis/MemorySSA/constant-memory.ll
@@ -1,4 +1,5 @@
-; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -analyze < %s 2>&1 | FileCheck %s
+; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -enable-new-pm=0 -analyze < %s 2>&1 | FileCheck %s
+; RUN: opt -aa-pipeline=basic-aa -passes='print<memoryssa>' -verify-memoryssa < %s 2>&1 | FileCheck %s
 ;
 ; Things that BasicAA can prove points to constant memory should be
 ; liveOnEntry, as well.
diff --git a/llvm/test/Analysis/MemorySSA/cyclicphi.ll b/llvm/test/Analysis/MemorySSA/cyclicphi.ll
--- a/llvm/test/Analysis/MemorySSA/cyclicphi.ll
+++ b/llvm/test/Analysis/MemorySSA/cyclicphi.ll
@@ -1,4 +1,4 @@
-; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -analyze < %s 2>&1 | FileCheck %s
+; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -enable-new-pm=0 -analyze < %s 2>&1 | FileCheck %s
 ; RUN: opt -aa-pipeline=basic-aa -passes='print<memoryssa>,verify<memoryssa>' -disable-output < %s 2>&1 | FileCheck %s
 
 %struct.hoge = type { i32, %struct.widget }
diff --git a/llvm/test/Analysis/MemorySSA/debugvalue2.ll b/llvm/test/Analysis/MemorySSA/debugvalue2.ll
--- a/llvm/test/Analysis/MemorySSA/debugvalue2.ll
+++ b/llvm/test/Analysis/MemorySSA/debugvalue2.ll
@@ -1,4 +1,4 @@
-; RUN: opt -disable-basic-aa -print-memoryssa -disable-output %s 2>&1 | FileCheck %s
+; RUN: opt -disable-basic-aa -enable-new-pm=0 -print-memoryssa -disable-output %s 2>&1 | FileCheck %s
 
 ; Note that the test crashes the MemorySSA verification when doing loop-rotate,
 ; if debuginfo is modelled in MemorySSA, due to the fact that MemorySSA is not
diff --git a/llvm/test/Analysis/MemorySSA/function-clobber.ll b/llvm/test/Analysis/MemorySSA/function-clobber.ll
--- a/llvm/test/Analysis/MemorySSA/function-clobber.ll
+++ b/llvm/test/Analysis/MemorySSA/function-clobber.ll
@@ -1,4 +1,4 @@
-; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -analyze < %s 2>&1 | FileCheck %s
+; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -enable-new-pm=0 -analyze < %s 2>&1 | FileCheck %s
 ; RUN: opt -aa-pipeline=basic-aa -passes='print<memoryssa>,verify<memoryssa>' -disable-output < %s 2>&1 | FileCheck %s
 ;
 ; Ensuring that external functions without attributes are MemoryDefs
diff --git a/llvm/test/Analysis/MemorySSA/function-mem-attrs.ll b/llvm/test/Analysis/MemorySSA/function-mem-attrs.ll
--- a/llvm/test/Analysis/MemorySSA/function-mem-attrs.ll
+++ b/llvm/test/Analysis/MemorySSA/function-mem-attrs.ll
@@ -1,4 +1,4 @@
-; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -analyze < %s 2>&1 | FileCheck %s
+; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -enable-new-pm=0 -analyze < %s 2>&1 | FileCheck %s
 ; RUN: opt -aa-pipeline=basic-aa -passes='print<memoryssa>,verify<memoryssa>' -disable-output < %s 2>&1 | FileCheck %s
 ;
 ; Test that various function attributes give us sane results.
diff --git a/llvm/test/Analysis/MemorySSA/invariant-groups.ll b/llvm/test/Analysis/MemorySSA/invariant-groups.ll
--- a/llvm/test/Analysis/MemorySSA/invariant-groups.ll
+++ b/llvm/test/Analysis/MemorySSA/invariant-groups.ll
@@ -1,4 +1,5 @@
-; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -analyze < %s 2>&1 | FileCheck %s
+; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -enable-new-pm=0 -analyze < %s 2>&1 | FileCheck %s
+; RUN: opt -aa-pipeline=basic-aa -passes='print<memoryssa>' -verify-memoryssa < %s 2>&1 | FileCheck %s
 ;
 ; Currently, MemorySSA doesn't support invariant groups. So, we should ignore
 ; launder.invariant.group intrinsics entirely. We'll need to pay attention to
diff --git a/llvm/test/Analysis/MemorySSA/lifetime-simple.ll b/llvm/test/Analysis/MemorySSA/lifetime-simple.ll
--- a/llvm/test/Analysis/MemorySSA/lifetime-simple.ll
+++ b/llvm/test/Analysis/MemorySSA/lifetime-simple.ll
@@ -1,4 +1,4 @@
-; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -analyze < %s 2>&1 | FileCheck %s
+; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -enable-new-pm=0 -analyze < %s 2>&1 | FileCheck %s
 ; RUN: opt -aa-pipeline=basic-aa -passes='print<memoryssa>,verify<memoryssa>' -disable-output < %s 2>&1 | FileCheck %s
 ; This test checks a number of things:
 ; First, the lifetime markers should not clobber any uses of Q or P.
diff --git a/llvm/test/Analysis/MemorySSA/load-invariant.ll b/llvm/test/Analysis/MemorySSA/load-invariant.ll
--- a/llvm/test/Analysis/MemorySSA/load-invariant.ll
+++ b/llvm/test/Analysis/MemorySSA/load-invariant.ll
@@ -1,4 +1,4 @@
-; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -analyze < %s 2>&1 | FileCheck %s
+; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -enable-new-pm=0 -analyze < %s 2>&1 | FileCheck %s
 ; RUN: opt -aa-pipeline=basic-aa -passes='print<memoryssa>' -verify-memoryssa -disable-output < %s 2>&1 | FileCheck %s
 ;
 ; Invariant loads should be considered live on entry, because, once the
diff --git a/llvm/test/Analysis/MemorySSA/loop-rotate-disablebasicaa.ll b/llvm/test/Analysis/MemorySSA/loop-rotate-disablebasicaa.ll
--- a/llvm/test/Analysis/MemorySSA/loop-rotate-disablebasicaa.ll
+++ b/llvm/test/Analysis/MemorySSA/loop-rotate-disablebasicaa.ll
@@ -1,4 +1,4 @@
-; RUN: opt -disable-basic-aa -print-memoryssa -disable-output %s 2>&1 | FileCheck %s
+; RUN: opt -disable-basic-aa -enable-new-pm=0 -print-memoryssa -disable-output %s 2>&1 | FileCheck %s
 
 ; Note: if @foo is modelled as a MemoryDef, this test will assert with -loop-rotate, due to MemorySSA not
 ; being preserved when moving instructions that may not read from or write to memory.
diff --git a/llvm/test/Analysis/MemorySSA/loop_rotate_remove_trivial_phis.ll b/llvm/test/Analysis/MemorySSA/loop_rotate_remove_trivial_phis.ll
--- a/llvm/test/Analysis/MemorySSA/loop_rotate_remove_trivial_phis.ll
+++ b/llvm/test/Analysis/MemorySSA/loop_rotate_remove_trivial_phis.ll
@@ -1,4 +1,4 @@
-; RUN: opt -loop-rotate -print-memoryssa -disable-output -enable-mssa-loop-dependency -verify-memoryssa %s 2>&1 |  FileCheck %s
+; RUN: opt -loop-rotate -enable-new-pm=0 -print-memoryssa -disable-output -enable-mssa-loop-dependency -verify-memoryssa %s 2>&1 |  FileCheck %s
 ; REQUIRES: asserts
 
 target datalayout = "e-m:e-i64:64-f80:128-n8:16:32:64-S128"
diff --git a/llvm/test/Analysis/MemorySSA/many-dom-backedge.ll b/llvm/test/Analysis/MemorySSA/many-dom-backedge.ll
--- a/llvm/test/Analysis/MemorySSA/many-dom-backedge.ll
+++ b/llvm/test/Analysis/MemorySSA/many-dom-backedge.ll
@@ -1,4 +1,4 @@
-; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -analyze < %s 2>&1 | FileCheck %s
+; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -enable-new-pm=0 -analyze < %s 2>&1 | FileCheck %s
 ; RUN: opt -aa-pipeline=basic-aa -passes='print<memoryssa>,verify<memoryssa>' -disable-output < %s 2>&1 | FileCheck %s
 ;
 ; many-dom.ll, with an added back-edge back into the switch.
diff --git a/llvm/test/Analysis/MemorySSA/many-doms.ll b/llvm/test/Analysis/MemorySSA/many-doms.ll
--- a/llvm/test/Analysis/MemorySSA/many-doms.ll
+++ b/llvm/test/Analysis/MemorySSA/many-doms.ll
@@ -1,4 +1,4 @@
-; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -analyze < %s 2>&1 | FileCheck %s
+; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -enable-new-pm=0 -analyze < %s 2>&1 | FileCheck %s
 ; RUN: opt -aa-pipeline=basic-aa -passes='print<memoryssa>,verify<memoryssa>' -disable-output < %s 2>&1 | FileCheck %s
 ;
 ; Testing many dominators, specifically from a switch statement in C.
diff --git a/llvm/test/Analysis/MemorySSA/multi-edges.ll b/llvm/test/Analysis/MemorySSA/multi-edges.ll
--- a/llvm/test/Analysis/MemorySSA/multi-edges.ll
+++ b/llvm/test/Analysis/MemorySSA/multi-edges.ll
@@ -1,4 +1,4 @@
-; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -analyze < %s 2>&1 | FileCheck %s
+; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -enable-new-pm=0 -analyze < %s 2>&1 | FileCheck %s
 ; RUN: opt -aa-pipeline=basic-aa -passes='print<memoryssa>,verify<memoryssa>' -disable-output < %s 2>&1 | FileCheck %s
 ;
 ; Makes sure we have a sane model if both successors of some block is the same
diff --git a/llvm/test/Analysis/MemorySSA/multiple-backedges-hal.ll b/llvm/test/Analysis/MemorySSA/multiple-backedges-hal.ll
--- a/llvm/test/Analysis/MemorySSA/multiple-backedges-hal.ll
+++ b/llvm/test/Analysis/MemorySSA/multiple-backedges-hal.ll
@@ -1,4 +1,4 @@
-; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -analyze < %s 2>&1 | FileCheck %s
+; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -enable-new-pm=0 -analyze < %s 2>&1 | FileCheck %s
 ; RUN: opt -aa-pipeline=basic-aa -passes='print<memoryssa>,verify<memoryssa>' -disable-output < %s 2>&1 | FileCheck %s
 
 ; hfinkel's case
diff --git a/llvm/test/Analysis/MemorySSA/multiple-locations.ll b/llvm/test/Analysis/MemorySSA/multiple-locations.ll
--- a/llvm/test/Analysis/MemorySSA/multiple-locations.ll
+++ b/llvm/test/Analysis/MemorySSA/multiple-locations.ll
@@ -1,4 +1,4 @@
-; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -analyze < %s 2>&1 | FileCheck %s
+; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -enable-new-pm=0 -analyze < %s 2>&1 | FileCheck %s
 ; RUN: opt -aa-pipeline=basic-aa -passes='print<memoryssa>,verify<memoryssa>' -disable-output < %s 2>&1 | FileCheck %s
 ;
 ; Checks that basicAA is doing some amount of disambiguation for us
diff --git a/llvm/test/Analysis/MemorySSA/no-disconnected.ll b/llvm/test/Analysis/MemorySSA/no-disconnected.ll
--- a/llvm/test/Analysis/MemorySSA/no-disconnected.ll
+++ b/llvm/test/Analysis/MemorySSA/no-disconnected.ll
@@ -1,4 +1,4 @@
-; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -analyze < %s 2>&1 | FileCheck %s
+; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -enable-new-pm=0 -analyze < %s 2>&1 | FileCheck %s
 ; RUN: opt -aa-pipeline=basic-aa -passes='print<memoryssa>,verify<memoryssa>' -disable-output < %s 2>&1 | FileCheck %s
 ;
 ; This test ensures we don't end up with multiple reaching defs for a single
diff --git a/llvm/test/Analysis/MemorySSA/optimize-use.ll b/llvm/test/Analysis/MemorySSA/optimize-use.ll
--- a/llvm/test/Analysis/MemorySSA/optimize-use.ll
+++ b/llvm/test/Analysis/MemorySSA/optimize-use.ll
@@ -1,5 +1,5 @@
-; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -analyze < %s 2>&1 | FileCheck %s --check-prefixes=CHECK,NOLIMIT
-; RUN: opt -memssa-check-limit=0 -basic-aa -print-memoryssa -verify-memoryssa -analyze < %s 2>&1 | FileCheck %s --check-prefixes=CHECK,LIMIT
+; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -enable-new-pm=0 -analyze < %s 2>&1 | FileCheck %s --check-prefixes=CHECK,NOLIMIT
+; RUN: opt -memssa-check-limit=0 -basic-aa -print-memoryssa -verify-memoryssa -enable-new-pm=0 -analyze < %s 2>&1 | FileCheck %s --check-prefixes=CHECK,LIMIT
 ; RUN: opt -aa-pipeline=basic-aa -passes='print<memoryssa>,verify<memoryssa>' -disable-output < %s 2>&1 | FileCheck %s --check-prefixes=CHECK,NOLIMIT
 ; RUN: opt -memssa-check-limit=0 -aa-pipeline=basic-aa -passes='print<memoryssa>,verify<memoryssa>' -disable-output < %s 2>&1 | FileCheck %s --check-prefixes=CHECK,LIMIT
 
diff --git a/llvm/test/Analysis/MemorySSA/phi-translation.ll b/llvm/test/Analysis/MemorySSA/phi-translation.ll
--- a/llvm/test/Analysis/MemorySSA/phi-translation.ll
+++ b/llvm/test/Analysis/MemorySSA/phi-translation.ll
@@ -1,5 +1,5 @@
-; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -analyze < %s 2>&1 | FileCheck %s --check-prefixes=CHECK,NOLIMIT
-; RUN: opt -memssa-check-limit=0 -basic-aa -print-memoryssa -verify-memoryssa -analyze < %s 2>&1 | FileCheck %s --check-prefixes=CHECK,LIMIT
+; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -enable-new-pm=0 -analyze < %s 2>&1 | FileCheck %s --check-prefixes=CHECK,NOLIMIT
+; RUN: opt -memssa-check-limit=0 -basic-aa -print-memoryssa -verify-memoryssa -enable-new-pm=0 -analyze < %s 2>&1 | FileCheck %s --check-prefixes=CHECK,LIMIT
 ; RUN: opt -aa-pipeline=basic-aa -passes='print<memoryssa>,verify<memoryssa>' -disable-output < %s 2>&1 | FileCheck %s --check-prefixes=CHECK,NOLIMIT
 ; RUN: opt -memssa-check-limit=0 -aa-pipeline=basic-aa -passes='print<memoryssa>,verify<memoryssa>' -disable-output < %s 2>&1 | FileCheck %s --check-prefixes=CHECK,LIMIT
 
diff --git a/llvm/test/Analysis/MemorySSA/pr28880.ll b/llvm/test/Analysis/MemorySSA/pr28880.ll
--- a/llvm/test/Analysis/MemorySSA/pr28880.ll
+++ b/llvm/test/Analysis/MemorySSA/pr28880.ll
@@ -1,4 +1,4 @@
-; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -analyze < %s 2>&1 | FileCheck %s
+; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -enable-new-pm=0 -analyze < %s 2>&1 | FileCheck %s
 ; RUN: opt -aa-pipeline=basic-aa -passes='print<memoryssa>,verify<memoryssa>' -disable-output < %s 2>&1 | FileCheck %s
 
 ; This testcase is reduced from SingleSource/Benchmarks/Misc/fbench.c
diff --git a/llvm/test/Analysis/MemorySSA/pr36883.ll b/llvm/test/Analysis/MemorySSA/pr36883.ll
--- a/llvm/test/Analysis/MemorySSA/pr36883.ll
+++ b/llvm/test/Analysis/MemorySSA/pr36883.ll
@@ -1,4 +1,4 @@
-; RUN: opt -basic-aa -memoryssa -analyze < %s 2>&1 -S | FileCheck %s
+; RUN: opt -basic-aa -memoryssa -enable-new-pm=0 -analyze < %s 2>&1 -S | FileCheck %s
 ; RUN: opt -aa-pipeline=basic-aa -passes='print<memoryssa>,verify<memoryssa>' -S < %s 2>&1 | FileCheck %s
 ;
 ; We weren't properly considering the args in callsites in equality or hashing.
diff --git a/llvm/test/Analysis/MemorySSA/pr41640.ll b/llvm/test/Analysis/MemorySSA/pr41640.ll
--- a/llvm/test/Analysis/MemorySSA/pr41640.ll
+++ b/llvm/test/Analysis/MemorySSA/pr41640.ll
@@ -1,4 +1,4 @@
-; RUN: opt -disable-output -licm -print-memoryssa -enable-mssa-loop-dependency=true < %s 2>&1 | FileCheck %s
+; RUN: opt -disable-output -licm -enable-new-pm=0 -print-memoryssa -enable-mssa-loop-dependency=true < %s 2>&1 | FileCheck %s
 target datalayout = "E-m:e-i1:8:16-i8:8:16-i64:64-f128:64-v128:64-a:8:16-n32:64"
 target triple = "s390x-ibm-linux"
 
diff --git a/llvm/test/Analysis/MemorySSA/pr43317.ll b/llvm/test/Analysis/MemorySSA/pr43317.ll
--- a/llvm/test/Analysis/MemorySSA/pr43317.ll
+++ b/llvm/test/Analysis/MemorySSA/pr43317.ll
@@ -1,4 +1,4 @@
-; RUN: opt -disable-output -licm -print-memoryssa -enable-mssa-loop-dependency=true < %s 2>&1 | FileCheck %s
+; RUN: opt -disable-output -licm -enable-new-pm=0 -print-memoryssa -enable-mssa-loop-dependency=true < %s 2>&1 | FileCheck %s
 @v_274 = external dso_local global i64, align 1
 @v_295 = external dso_local global i16, align 1
 @v_335 = external dso_local global i32, align 1
diff --git a/llvm/test/Analysis/MemorySSA/pr43427.ll b/llvm/test/Analysis/MemorySSA/pr43427.ll
--- a/llvm/test/Analysis/MemorySSA/pr43427.ll
+++ b/llvm/test/Analysis/MemorySSA/pr43427.ll
@@ -1,4 +1,4 @@
-; RUN: opt -disable-output -licm -print-memoryssa -enable-mssa-loop-dependency=true < %s 2>&1 | FileCheck %s
+; RUN: opt -disable-output -licm -enable-new-pm=0 -print-memoryssa -enable-mssa-loop-dependency=true < %s 2>&1 | FileCheck %s
 
 ; CHECK-LABEL: @f()
 ; CHECK: 8 = MemoryPhi(
diff --git a/llvm/test/Analysis/MemorySSA/pr43438.ll b/llvm/test/Analysis/MemorySSA/pr43438.ll
--- a/llvm/test/Analysis/MemorySSA/pr43438.ll
+++ b/llvm/test/Analysis/MemorySSA/pr43438.ll
@@ -1,4 +1,4 @@
-; RUN: opt -disable-output -licm -print-memoryssa -enable-mssa-loop-dependency=true < %s 2>&1 | FileCheck %s
+; RUN: opt -disable-output -licm -enable-new-pm=0 -print-memoryssa -enable-mssa-loop-dependency=true < %s 2>&1 | FileCheck %s
 target triple = "x86_64-unknown-linux-gnu"
 
 ; CHECK-LABEL: @main()
diff --git a/llvm/test/Analysis/MemorySSA/ptr-const-mem.ll b/llvm/test/Analysis/MemorySSA/ptr-const-mem.ll
--- a/llvm/test/Analysis/MemorySSA/ptr-const-mem.ll
+++ b/llvm/test/Analysis/MemorySSA/ptr-const-mem.ll
@@ -1,4 +1,4 @@
-; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -analyze -memssa-check-limit=0 < %s 2>&1 | FileCheck %s
+; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -enable-new-pm=0 -analyze -memssa-check-limit=0 < %s 2>&1 | FileCheck %s
 ; RUN: opt -aa-pipeline=basic-aa -passes='print<memoryssa>' -verify-memoryssa -disable-output -memssa-check-limit=0 < %s 2>&1 | FileCheck %s
 target datalayout = "e-p:32:32-p1:64:64-p2:64:64-p3:32:32-p4:64:64-p5:32:32-i64:64-v16:16-v24:32-v32:32-v48:64-v96:128-v192:256-v256:256-v512:512-v1024:1024-v2048:2048-n32:64"
 target triple = "amdgcn"
diff --git a/llvm/test/Analysis/MemorySSA/scalable-vec.ll b/llvm/test/Analysis/MemorySSA/scalable-vec.ll
--- a/llvm/test/Analysis/MemorySSA/scalable-vec.ll
+++ b/llvm/test/Analysis/MemorySSA/scalable-vec.ll
@@ -1,4 +1,4 @@
-; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -analyze < %s 2>&1 | FileCheck %s
+; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -enable-new-pm=0 -analyze < %s 2>&1 | FileCheck %s
 ; RUN: opt -aa-pipeline=basic-aa -passes='print<memoryssa>' -verify-memoryssa -disable-output < %s 2>&1 | FileCheck %s
 
 ; CHECK-LABEL: define <vscale x 4 x i32> @f(
diff --git a/llvm/test/Analysis/MemorySSA/volatile-clobber.ll b/llvm/test/Analysis/MemorySSA/volatile-clobber.ll
--- a/llvm/test/Analysis/MemorySSA/volatile-clobber.ll
+++ b/llvm/test/Analysis/MemorySSA/volatile-clobber.ll
@@ -1,4 +1,4 @@
-; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -analyze < %s 2>&1 | FileCheck %s
+; RUN: opt -basic-aa -print-memoryssa -verify-memoryssa -enable-new-pm=0 -analyze < %s 2>&1 | FileCheck %s
 ; RUN: opt -aa-pipeline=basic-aa -passes='print<memoryssa>,verify<memoryssa>' -disable-output < %s 2>&1 | FileCheck %s
 ;
 ; Ensures that volatile stores/loads count as MemoryDefs