diff --git a/lld/test/CMakeLists.txt b/lld/test/CMakeLists.txt
--- a/lld/test/CMakeLists.txt
+++ b/lld/test/CMakeLists.txt
@@ -28,7 +28,7 @@
FileCheck count llc llvm-ar llvm-as llvm-bcanalyzer llvm-config llvm-cvtres
llvm-dis llvm-dwarfdump llvm-lib llvm-lipo llvm-mc llvm-nm llvm-objcopy
llvm-objdump llvm-pdbutil llvm-readelf llvm-readobj llvm-strip not obj2yaml
- opt yaml2obj
+ opt split-file yaml2obj
)
endif()
diff --git a/lld/test/ELF/linkerscript/noload.s b/lld/test/ELF/linkerscript/noload.s
--- a/lld/test/ELF/linkerscript/noload.s
+++ b/lld/test/ELF/linkerscript/noload.s
@@ -1,12 +1,8 @@
# REQUIRES: x86
-# RUN: llvm-mc -filetype=obj -triple=x86_64-unknown-linux %s -o %t.o
-# RUN: echo "SECTIONS { \
-# RUN: .data_noload_a (NOLOAD) : { *(.data_noload_a) } \
-# RUN: .data_noload_b (0x10000) (NOLOAD) : { *(.data_noload_b) } \
-# RUN: .no_input_sec_noload (NOLOAD) : { . += 1; } \
-# RUN: .text (0x20000) : { *(.text) } };" > %t.script
-# RUN: ld.lld -o %t --script %t.script %t.o
-# RUN: llvm-readelf -S -l %t | FileCheck %s
+# RUN: split-file %s %t
+# RUN: llvm-mc -filetype=obj -triple=x86_64 %t/asm -o %t.o
+# RUN: ld.lld --script %t/lds %t.o -o %t/out
+# RUN: llvm-readelf -S -l %t/out | FileCheck %s
# CHECK: Name Type Address Off Size
# CHECK: .data_noload_a NOBITS 0000000000000000 [[OFF:[0-9a-f]+]] 001000
@@ -16,6 +12,7 @@
# CHECK: Type Offset VirtAddr PhysAddr
# CHECK-NEXT: LOAD 0x001000 0x0000000000020000 0x0000000000020000
+#--- asm
.section .text,"ax",@progbits
nop
@@ -24,3 +21,11 @@
.section .data_noload_b,"aw",@progbits
.zero 4096
+
+#--- lds
+SECTIONS {
+ .data_noload_a (NOLOAD) : { *(.data_noload_a) }
+ .data_noload_b (0x10000) (NOLOAD) : { *(.data_noload_b) }
+ .no_input_sec_noload (NOLOAD) : { . += 1; }
+ .text (0x20000) : { *(.text) }
+}
diff --git a/llvm/docs/TestingGuide.rst b/llvm/docs/TestingGuide.rst
--- a/llvm/docs/TestingGuide.rst
+++ b/llvm/docs/TestingGuide.rst
@@ -271,8 +271,27 @@
Extra files
-----------
-If your test requires extra files besides the file containing the ``RUN:``
-lines, the idiomatic place to put them is in a subdirectory ``Inputs``.
+If your test requires extra files besides the file containing the ``RUN:`` lines
+and the extra files are small, consider specifying them in the same file and
+using ``split-file`` to extract them. For example,
+
+.. code-block:: llvm
+
+ ; RUN: split-file %s %t
+ ; RUN: llvm-link -S %t/a.ll %t/b.ll | FileCheck %s
+
+ ; CHECK: ...
+
+ ;--- a.ll
+ ...
+ ;--- b.ll
+ ...
+
+The parts are separated by the regex ``^(.|//)--- <part>``. By default the
+extracted content has leading empty lines to preserve line numbers. Specify
+``--no-leading-lines`` to drop leading lines.
+
+If the extra files are large, the idiomatic place to put them is in a subdirectory ``Inputs``.
You can then refer to the extra files as ``%S/Inputs/foo.bar``.
For example, consider ``test/Linker/ident.ll``. The directory structure is
diff --git a/llvm/test/CMakeLists.txt b/llvm/test/CMakeLists.txt
--- a/llvm/test/CMakeLists.txt
+++ b/llvm/test/CMakeLists.txt
@@ -119,6 +119,7 @@
opt
sancov
sanstats
+ split-file
verify-uselistorder
yaml-bench
yaml2obj
diff --git a/llvm/test/lit.cfg.py b/llvm/test/lit.cfg.py
--- a/llvm/test/lit.cfg.py
+++ b/llvm/test/lit.cfg.py
@@ -141,6 +141,7 @@
ToolSubst('%llvm-objcopy', FindTool('llvm-objcopy')),
ToolSubst('%llvm-strip', FindTool('llvm-strip')),
ToolSubst('%llvm-install-name-tool', FindTool('llvm-install-name-tool')),
+ ToolSubst('%split-file', FindTool('split-file')),
]
# FIXME: Why do we have both `lli` and `%lli` that do slightly different things?
diff --git a/llvm/test/tools/gold/X86/multiple-sections.ll b/llvm/test/tools/gold/X86/multiple-sections.ll
--- a/llvm/test/tools/gold/X86/multiple-sections.ll
+++ b/llvm/test/tools/gold/X86/multiple-sections.ll
@@ -1,10 +1,8 @@
-; RUN: echo ".text.tin" > %t_order_lto.txt
-; RUN: echo ".text._start" >> %t_order_lto.txt
-; RUN: echo ".text.pat" >> %t_order_lto.txt
-; RUN: llvm-as %s -o %t.o
+; RUN: split-file %s %t
+; RUN: llvm-as %t/a.ll -o %t.o
; RUN: %gold -plugin %llvmshlibdir/LLVMgold%shlibext \
; RUN: -m elf_x86_64 -o %t.exe %t.o \
-; RUN: --section-ordering-file=%t_order_lto.txt
+; RUN: --section-ordering-file=%t/order
; RUN: llvm-readelf -s %t.exe | FileCheck %s
; Check that the order of the sections is tin -> _start -> pat.
@@ -13,6 +11,12 @@
; CHECK: 00000000004000b0 1 FUNC LOCAL DEFAULT 1 tin
; CHECK: 00000000004000c0 15 FUNC GLOBAL DEFAULT 1 _start
+;--- order
+.text.tin
+.text._start
+.text.pat
+
+;--- a.ll
target datalayout = "e-m:e-i64:64-f80:128-n8:16:32:64-S128"
target triple = "x86_64-unknown-linux-gnu"
diff --git a/llvm/test/tools/llvm-strings/radix.test b/llvm/test/tools/llvm-strings/radix.test
--- a/llvm/test/tools/llvm-strings/radix.test
+++ b/llvm/test/tools/llvm-strings/radix.test
@@ -1,29 +1,32 @@
## Show that llvm-strings can handle the -t/--radix switch properly.
-RUN: echo one > %t
-RUN: echo two >> %t
-RUN: echo three >> %t
-RUN: echo four >> %t
-RUN: echo five >> %t
-RUN: echo six >> %t
-RUN: echo seven >> %t
-RUN: echo eight >> %t
-RUN: echo nine >> %t
-RUN: echo ten >> %t
-
-RUN: llvm-strings %t | FileCheck %s -check-prefix CHECK-NONE --implicit-check-not={{.}}
-RUN: llvm-strings -t d %t | FileCheck %s -check-prefix CHECK-DEC --strict-whitespace --implicit-check-not={{.}}
-RUN: llvm-strings -t o %t | FileCheck %s -check-prefix CHECK-OCT --strict-whitespace --implicit-check-not={{.}}
-RUN: llvm-strings -t x %t | FileCheck %s -check-prefix CHECK-HEX --strict-whitespace --implicit-check-not={{.}}
+RUN: split-file --no-leading-lines %s %t
+#--- a.txt
+one
+two
+three
+four
+five
+six
+seven
+eight
+nine
+ten
+#--- end
+
+RUN: llvm-strings %t/a.txt | FileCheck %s -check-prefix CHECK-NONE --implicit-check-not={{.}}
+RUN: llvm-strings -t d %t/a.txt | FileCheck %s -check-prefix CHECK-DEC --strict-whitespace --implicit-check-not={{.}}
+RUN: llvm-strings -t o %t/a.txt | FileCheck %s -check-prefix CHECK-OCT --strict-whitespace --implicit-check-not={{.}}
+RUN: llvm-strings -t x %t/a.txt | FileCheck %s -check-prefix CHECK-HEX --strict-whitespace --implicit-check-not={{.}}
## Show --radix works too.
-RUN: llvm-strings --radix d %t | FileCheck %s -check-prefix CHECK-DEC --strict-whitespace
-RUN: llvm-strings --radix o %t | FileCheck %s -check-prefix CHECK-OCT --strict-whitespace
-RUN: llvm-strings --radix x %t | FileCheck %s -check-prefix CHECK-HEX --strict-whitespace
+RUN: llvm-strings --radix d %t/a.txt | FileCheck %s -check-prefix CHECK-DEC --strict-whitespace
+RUN: llvm-strings --radix o %t/a.txt | FileCheck %s -check-prefix CHECK-OCT --strict-whitespace
+RUN: llvm-strings --radix x %t/a.txt | FileCheck %s -check-prefix CHECK-HEX --strict-whitespace
## Show different syntaxes work.
-RUN: llvm-strings --radix=d %t | FileCheck %s -check-prefix CHECK-DEC --strict-whitespace
-RUN: llvm-strings -t=d %t | FileCheck %s -check-prefix CHECK-DEC --strict-whitespace
+RUN: llvm-strings --radix=d %t/a.txt | FileCheck %s -check-prefix CHECK-DEC --strict-whitespace
+RUN: llvm-strings -t=d %t/a.txt | FileCheck %s -check-prefix CHECK-DEC --strict-whitespace
CHECK-NONE: {{^}}three
CHECK-NONE: {{^}}four
@@ -54,5 +57,5 @@
CHECK-HEX: {{^}} 28 nine
## Show that an invalid value is rejected.
-RUN: not llvm-strings --radix z %t 2>&1 | FileCheck %s --check-prefix=INVALID
+RUN: not llvm-strings --radix z %t/a.txt 2>&1 | FileCheck %s --check-prefix=INVALID
INVALID: llvm-strings{{.*}}: for the --radix option: Cannot find option named 'z'!
diff --git a/llvm/test/tools/split-file/Inputs/basic-aa.txt b/llvm/test/tools/split-file/Inputs/basic-aa.txt
new file mode 100644
--- /dev/null
+++ b/llvm/test/tools/split-file/Inputs/basic-aa.txt
@@ -0,0 +1,2 @@
+
+aa
diff --git a/llvm/test/tools/split-file/Inputs/basic-bb.txt b/llvm/test/tools/split-file/Inputs/basic-bb.txt
new file mode 100644
--- /dev/null
+++ b/llvm/test/tools/split-file/Inputs/basic-bb.txt
@@ -0,0 +1,6 @@
+
+
+
+; Comments are preserved.
+bb
+
diff --git a/llvm/test/tools/split-file/Inputs/basic-cc.txt b/llvm/test/tools/split-file/Inputs/basic-cc.txt
new file mode 100644
--- /dev/null
+++ b/llvm/test/tools/split-file/Inputs/basic-cc.txt
@@ -0,0 +1,8 @@
+
+
+
+
+
+
+
+cc
diff --git a/llvm/test/tools/split-file/basic.test b/llvm/test/tools/split-file/basic.test
new file mode 100644
--- /dev/null
+++ b/llvm/test/tools/split-file/basic.test
@@ -0,0 +1,40 @@
+#--- aa
+aa
+;--- bb
+; Comments are preserved.
+bb
+
+//--- subdir/cc
+cc
+//--- end
+
+# RUN: rm -rf %t
+# RUN: split-file %s %t
+# RUN: diff %S/Inputs/basic-aa.txt %t/aa
+# RUN: diff %S/Inputs/basic-bb.txt %t/bb
+# RUN: diff %S/Inputs/basic-cc.txt %t/subdir/cc
+# RUN: FileCheck %s --check-prefix=END < %t/end
+
+## Can be called on a non-empty directory.
+# RUN: split-file %s %t
+# RUN: diff %S/Inputs/basic-aa.txt %t/aa
+
+## Test that we will delete the output if it is a file, so that we can create
+## a directory.
+# RUN: rm -rf %t && touch %t
+# RUN: split-file %s %t
+# RUN: diff %S/Inputs/basic-aa.txt %t/aa
+
+# END: RUN: split-file %s %t
+
+# RUN: not %split-file 2>&1 | FileCheck %s --check-prefix=NO_INPUT
+
+# NO_INPUT: split-file: error: input filename is not specified
+
+# RUN: not %split-file %s '' 2>&1 | FileCheck %s --check-prefix=NO_OUTPUT
+
+# NO_OUTPUT: split-file: error: output directory is not specified
+
+# RUN: not %split-file %S/Inputs/basic-aa.txt %t 2>&1 | FileCheck %s --check-prefix=NOT_EXIST
+
+# NOT_EXIST: split-file: error: {{.*}}.txt: no part separator was found
diff --git a/llvm/test/tools/split-file/empty.test b/llvm/test/tools/split-file/empty.test
new file mode 100644
--- /dev/null
+++ b/llvm/test/tools/split-file/empty.test
@@ -0,0 +1,4 @@
+# RUN: split-file --no-leading-lines %s %t
+# RUN: count 0 < %t/empty
+
+#--- empty
diff --git a/llvm/test/tools/split-file/error.test b/llvm/test/tools/split-file/error.test
new file mode 100644
--- /dev/null
+++ b/llvm/test/tools/split-file/error.test
@@ -0,0 +1,16 @@
+# RUN: not %split-file %s %t 2>&1 | FileCheck %s
+# RUN: not ls %t/dup
+
+# CHECK: {{.*}}.test:[[#@LINE+1]]: error: empty part name
+//---
+
+# CHECK: {{.*}}.test:[[#@LINE+1]]: error: part name cannot have leading or trailing space
+//--- leading_space
+
+# CHECK: {{.*}}.test:[[#@LINE+1]]: error: part name cannot have leading or trailing space
+//--- trailing_space
+
+;--- dup
+
+# CHECK: {{.*}}.test:[[#@LINE+1]]: error: ';--- dup' occurs more than once
+;--- dup
diff --git a/llvm/test/tools/split-file/help.test b/llvm/test/tools/split-file/help.test
new file mode 100644
--- /dev/null
+++ b/llvm/test/tools/split-file/help.test
@@ -0,0 +1,6 @@
+RUN: split-file --help 2>&1 | FileCheck --implicit-check-not='General Options:' %s
+CHECK: OVERVIEW: Split input {{.*}}
+CHECK: USAGE: split-file [options] filename directory
+CHECK: Generic Options:
+CHECK: split-file Options:
+CHECK: --no-leading-lines
diff --git a/llvm/test/tools/split-file/no-leading-lines.test b/llvm/test/tools/split-file/no-leading-lines.test
new file mode 100644
--- /dev/null
+++ b/llvm/test/tools/split-file/no-leading-lines.test
@@ -0,0 +1,10 @@
+## With --no-leading-lines, don't add leading lines (which is used to preserve line numbers).
+
+# RUN: split-file --no-leading-lines %s %t
+# RUN: count 1 < %t/a.txt
+# RUN: FileCheck %s < %t/a.txt
+
+# CHECK: input
+
+#--- a.txt
+input
diff --git a/llvm/test/tools/split-file/output-is-special.test b/llvm/test/tools/split-file/output-is-special.test
new file mode 100644
--- /dev/null
+++ b/llvm/test/tools/split-file/output-is-special.test
@@ -0,0 +1,8 @@
+# UNSUPPORTED: system-windows
+# REQUIRES: shell
+
+## Don't delete the output if it is special, otherwise root may accidentally
+## remove important special files.
+# RUN: not split-file %s /dev/null 2>&1 | FileCheck %s
+
+# CHECK: error: /dev/null: output cannot be a special file
diff --git a/llvm/tools/split-file/.clang-tidy b/llvm/tools/split-file/.clang-tidy
new file mode 100644
--- /dev/null
+++ b/llvm/tools/split-file/.clang-tidy
@@ -0,0 +1,19 @@
+# Almost identical to the top-level .clang-tidy, except that {Member,Parameter,Variable}Case use camelBack.
+Checks: '-*,clang-diagnostic-*,llvm-*,misc-*,-misc-unused-parameters,-misc-non-private-member-variables-in-classes,readability-identifier-naming'
+CheckOptions:
+ - key: readability-identifier-naming.ClassCase
+ value: CamelCase
+ - key: readability-identifier-naming.EnumCase
+ value: CamelCase
+ - key: readability-identifier-naming.FunctionCase
+ value: camelBack
+ - key: readability-identifier-naming.MemberCase
+ value: camelBack
+ - key: readability-identifier-naming.ParameterCase
+ value: camelBack
+ - key: readability-identifier-naming.UnionCase
+ value: CamelCase
+ - key: readability-identifier-naming.VariableCase
+ value: camelBack
+ - key: readability-identifier-naming.IgnoreMainLikeFunctions
+ value: 1
diff --git a/llvm/tools/split-file/CMakeLists.txt b/llvm/tools/split-file/CMakeLists.txt
new file mode 100644
--- /dev/null
+++ b/llvm/tools/split-file/CMakeLists.txt
@@ -0,0 +1,7 @@
+set(LLVM_LINK_COMPONENTS
+ Support
+ )
+
+add_llvm_tool(split-file
+ split-file.cpp
+ )
diff --git a/llvm/tools/split-file/split-file.cpp b/llvm/tools/split-file/split-file.cpp
new file mode 100644
--- /dev/null
+++ b/llvm/tools/split-file/split-file.cpp
@@ -0,0 +1,172 @@
+//===- split-file.cpp - Input splitting utility ---------------------------===//
+//
+// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
+// See https://llvm.org/LICENSE.txt for license information.
+// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
+//
+//===----------------------------------------------------------------------===//
+//
+// Split input into multipe parts separated by regex '^(.|//)--- ' and extract
+// the specified part.
+//
+//===----------------------------------------------------------------------===//
+
+#include "llvm/ADT/DenseMap.h"
+#include "llvm/ADT/StringExtras.h"
+#include "llvm/ADT/StringRef.h"
+#include "llvm/Support/CommandLine.h"
+#include "llvm/Support/FileOutputBuffer.h"
+#include "llvm/Support/LineIterator.h"
+#include "llvm/Support/MemoryBuffer.h"
+#include "llvm/Support/Path.h"
+#include "llvm/Support/ToolOutputFile.h"
+#include "llvm/Support/WithColor.h"
+#include <string>
+#include <system_error>
+
+using namespace llvm;
+
+static cl::OptionCategory cat("split-file Options");
+
+static cl::opt<std::string> input(cl::Positional, cl::desc("filename"),
+ cl::cat(cat));
+
+static cl::opt<std::string> output(cl::Positional, cl::desc("directory"),
+ cl::value_desc("directory"), cl::cat(cat));
+
+static cl::opt<bool> noLeadingLines("no-leading-lines",
+ cl::desc("Don't preserve line numbers"),
+ cl::cat(cat));
+
+static StringRef toolName;
+static int errorCount;
+
+LLVM_ATTRIBUTE_NORETURN static void fatal(StringRef filename,
+ const Twine &message) {
+ if (filename.empty())
+ WithColor::error(errs(), toolName) << message << '\n';
+ else
+ WithColor::error(errs(), toolName) << filename << ": " << message << '\n';
+ exit(1);
+}
+
+static void error(StringRef filename, int64_t line, const Twine &message) {
+ ++errorCount;
+ errs() << filename << ':' << line << ": ";
+ WithColor::error(errs()) << message << '\n';
+}
+
+namespace {
+struct Part {
+ const char *begin = nullptr;
+ const char *end = nullptr;
+ int64_t leadingLines = 0;
+};
+} // namespace
+
+static int handle(MemoryBuffer &inputBuf, StringRef input) {
+ DenseMap<StringRef, Part> partToBegin;
+ StringRef lastPart, separator;
+ for (line_iterator i(inputBuf, /*SkipBlanks=*/false, '\0'); !i.is_at_eof();) {
+ const int64_t lineNo = i.line_number();
+ const StringRef line = *i++;
+ const size_t markerLen = line.startswith("//") ? 6 : 5;
+ if (!(line.size() >= markerLen &&
+ line.substr(markerLen - 4).startswith("--- ")))
+ continue;
+ separator = line.substr(0, markerLen);
+ const StringRef partName = line.substr(markerLen);
+ if (partName.empty()) {
+ error(input, lineNo, "empty part name");
+ continue;
+ }
+ if (isSpace(partName.front()) || isSpace(partName.back())) {
+ error(input, lineNo, "part name cannot have leading or trailing space");
+ continue;
+ }
+
+ auto res = partToBegin.try_emplace(partName);
+ if (!res.second) {
+ error(input, lineNo,
+ "'" + separator + partName + "' occurs more than once");
+ continue;
+ }
+ if (!lastPart.empty())
+ partToBegin[lastPart].end = line.data();
+ Part &cur = res.first->second;
+ if (!i.is_at_eof())
+ cur.begin = i->data();
+ // If --no-leading-lines is not specified, numEmptyLines is 0. Append
+ // newlines so that the extracted part preserves line numbers.
+ cur.leadingLines = noLeadingLines ? 0 : i.line_number() - 1;
+
+ lastPart = partName;
+ }
+ if (lastPart.empty())
+ fatal(input, "no part separator was found");
+ if (errorCount)
+ return 1;
+ partToBegin[lastPart].end = inputBuf.getBufferEnd();
+
+ std::vector<std::unique_ptr<ToolOutputFile>> outputFiles;
+ SmallString<256> partPath;
+ for (auto &keyValue : partToBegin) {
+ partPath.clear();
+ sys::path::append(partPath, output, keyValue.first);
+ std::error_code ec =
+ sys::fs::create_directories(sys::path::parent_path(partPath));
+ if (ec)
+ fatal(input, ec.message());
+ auto f = std::make_unique<ToolOutputFile>(partPath.str(), ec,
+ llvm::sys::fs::OF_None);
+ if (!f)
+ fatal(input, ec.message());
+
+ Part &part = keyValue.second;
+ for (int64_t i = 0; i != part.leadingLines; ++i)
+ (*f).os().write('\n');
+ if (part.begin)
+ (*f).os().write(part.begin, part.end - part.begin);
+ outputFiles.push_back(std::move(f));
+ }
+
+ for (std::unique_ptr<ToolOutputFile> &outputFile : outputFiles)
+ outputFile->keep();
+ return 0;
+}
+
+int main(int argc, const char **argv) {
+ toolName = sys::path::stem(argv[0]);
+ cl::HideUnrelatedOptions({&cat});
+ cl::ParseCommandLineOptions(
+ argc, argv,
+ "Split input into multiple parts separated by regex '^(.|//)--- ' and "
+ "extract the part specified by '^(.|//)--- <part>'\n",
+ nullptr,
+ /*EnvVar=*/nullptr,
+ /*LongOptionsUseDoubleDash=*/true);
+
+ if (input.empty())
+ fatal("", "input filename is not specified");
+ if (output.empty())
+ fatal("", "output directory is not specified");
+ ErrorOr<std::unique_ptr<MemoryBuffer>> bufferOrErr =
+ MemoryBuffer::getFileOrSTDIN(input);
+ if (std::error_code ec = bufferOrErr.getError())
+ fatal(input, ec.message());
+
+ // Delete output if it is a file or an empty directory, so that we can create
+ // a directory.
+ sys::fs::file_status status;
+ if (std::error_code ec = sys::fs::status(output, status))
+ if (ec.value() != static_cast<int>(std::errc::no_such_file_or_directory))
+ fatal(output, ec.message());
+ if (status.type() != sys::fs::file_type::file_not_found &&
+ status.type() != sys::fs::file_type::directory_file &&
+ status.type() != sys::fs::file_type::regular_file)
+ fatal(output, "output cannot be a special file");
+ if (std::error_code ec = sys::fs::remove(output, /*IgnoreNonExisting=*/true))
+ if (ec.value() != static_cast<int>(std::errc::directory_not_empty))
+ fatal(output, ec.message());
+ return handle(**bufferOrErr, input);
+}
diff --git a/llvm/utils/gn/secondary/lld/test/BUILD.gn b/llvm/utils/gn/secondary/lld/test/BUILD.gn
--- a/llvm/utils/gn/secondary/lld/test/BUILD.gn
+++ b/llvm/utils/gn/secondary/lld/test/BUILD.gn
@@ -94,6 +94,7 @@
"//llvm/tools/llvm-readobj:symlinks",
"//llvm/tools/obj2yaml",
"//llvm/tools/opt",
+ "//llvm/tools/split-file",
"//llvm/tools/yaml2obj",
"//llvm/utils/FileCheck",
"//llvm/utils/count",
diff --git a/llvm/utils/gn/secondary/llvm/test/BUILD.gn b/llvm/utils/gn/secondary/llvm/test/BUILD.gn
--- a/llvm/utils/gn/secondary/llvm/test/BUILD.gn
+++ b/llvm/utils/gn/secondary/llvm/test/BUILD.gn
@@ -260,6 +260,7 @@
"//llvm/tools/opt",
"//llvm/tools/sancov",
"//llvm/tools/sanstats",
+ "//llvm/tools/split-file",
"//llvm/tools/verify-uselistorder",
"//llvm/tools/yaml2obj",
"//llvm/unittests",
diff --git a/llvm/utils/gn/secondary/llvm/tools/split-file/BUILD.gn b/llvm/utils/gn/secondary/llvm/tools/split-file/BUILD.gn
new file mode 100644
--- /dev/null
+++ b/llvm/utils/gn/secondary/llvm/tools/split-file/BUILD.gn
@@ -0,0 +1,4 @@
+executable("split-file") {
+ deps = [ "//llvm/lib/Support" ]
+ sources = [ "split-file.cpp" ]
+}