diff --git a/llvm/lib/Target/X86/X86ISelLowering.h b/llvm/lib/Target/X86/X86ISelLowering.h
--- a/llvm/lib/Target/X86/X86ISelLowering.h
+++ b/llvm/lib/Target/X86/X86ISelLowering.h
@@ -774,6 +774,12 @@
     // Store FP control world into i16 memory.
     FNSTCW16m,
 
+    // Store x87 FPU environment into memory.
+    FNSTENV,
+
+    // Load x87 FPU environment from memory.
+    FLDENV,
+
     /// This instruction implements FP_TO_SINT with the
     /// integer destination in memory and a FP reg source.  This corresponds
     /// to the X86::FIST*m instructions and the rounding mode change stuff. It
@@ -1499,6 +1505,9 @@
     SDValue lowerEH_SJLJ_SETUP_DISPATCH(SDValue Op, SelectionDAG &DAG) const;
     SDValue LowerINIT_TRAMPOLINE(SDValue Op, SelectionDAG &DAG) const;
     SDValue LowerFLT_ROUNDS_(SDValue Op, SelectionDAG &DAG) const;
+    SDValue LowerGET_FPENV(SDValue Op, SelectionDAG &DAG) const;
+    SDValue LowerSET_FPENV(SDValue Op, SelectionDAG &DAG) const;
+    SDValue LowerRESET_FPENV(SDValue Op, SelectionDAG &DAG) const;
     SDValue LowerWin64_i128OP(SDValue Op, SelectionDAG &DAG) const;
     SDValue LowerGC_TRANSITION(SDValue Op, SelectionDAG &DAG) const;
     SDValue LowerINTRINSIC_WO_CHAIN(SDValue Op, SelectionDAG &DAG) const;
diff --git a/llvm/lib/Target/X86/X86ISelLowering.cpp b/llvm/lib/Target/X86/X86ISelLowering.cpp
--- a/llvm/lib/Target/X86/X86ISelLowering.cpp
+++ b/llvm/lib/Target/X86/X86ISelLowering.cpp
@@ -331,6 +331,9 @@
   setOperationAction(ISD::FREM             , MVT::f80  , Expand);
   setOperationAction(ISD::FREM             , MVT::f128 , Expand);
   setOperationAction(ISD::FLT_ROUNDS_      , MVT::i32  , Custom);
+  setOperationAction(ISD::GET_FPENV        , MVT::Other, Custom);
+  setOperationAction(ISD::SET_FPENV        , MVT::Other, Custom);
+  setOperationAction(ISD::RESET_FPENV      , MVT::Other, Custom);
 
   // Promote the i8 variants and force them on up to i32 which has a shorter
   // encoding.
@@ -26011,6 +26014,28 @@
   return DAG.getMergeValues({RetVal, Chain}, DL);
 }
 
+SDValue X86TargetLowering::LowerGET_FPENV(SDValue Op, SelectionDAG &DAG) const {
+  MachineFunction &MF = DAG.getMachineFunction();
+  SDLoc DL(Op);
+  SDValue Chain = Op.getOperand(0);
+  SDValue Ptr = Op.getOperand(1);
+  SDValue Ops[] = {Chain, Ptr};
+  MachinePointerInfo MPI(cast<SrcValueSDNode>(Ptr)->getValue());
+  MachineMemOperand *FPEnvMMO = MF.getMachineMemOperand(MPI, MachineMemOperand::MOStore, 28, Align(4));
+
+  Chain = DAG.getMemIntrinsicNode(X86ISD::FNSTENV, DL, DAG.getVTList(MVT::Other), Ops, MVT::i32, FPEnvMMO);
+  return Chain;
+}
+
+SDValue X86TargetLowering::LowerSET_FPENV(SDValue Op, SelectionDAG &DAG) const {
+  return SDValue();
+}
+
+SDValue X86TargetLowering::LowerRESET_FPENV(SDValue Op,
+                                            SelectionDAG &DAG) const {
+  return SDValue();
+}
+
 /// Lower a vector CTLZ using native supported vector CTLZ instruction.
 //
 // i8/i16 vector implemented using dword LZCNT vector instruction
@@ -29100,6 +29125,9 @@
   case ISD::INIT_TRAMPOLINE:    return LowerINIT_TRAMPOLINE(Op, DAG);
   case ISD::ADJUST_TRAMPOLINE:  return LowerADJUST_TRAMPOLINE(Op, DAG);
   case ISD::FLT_ROUNDS_:        return LowerFLT_ROUNDS_(Op, DAG);
+  case ISD::GET_FPENV:          return LowerGET_FPENV(Op, DAG);
+  case ISD::SET_FPENV:          return LowerSET_FPENV(Op, DAG);
+  case ISD::RESET_FPENV:        return LowerRESET_FPENV(Op, DAG);
   case ISD::CTLZ:
   case ISD::CTLZ_ZERO_UNDEF:    return LowerCTLZ(Op, Subtarget, DAG);
   case ISD::CTTZ:
@@ -30178,6 +30206,8 @@
   NODE_NAME_CASE(EH_RETURN)
   NODE_NAME_CASE(TC_RETURN)
   NODE_NAME_CASE(FNSTCW16m)
+  NODE_NAME_CASE(FNSTENV)
+  NODE_NAME_CASE(FLDENV)
   NODE_NAME_CASE(LCMPXCHG_DAG)
   NODE_NAME_CASE(LCMPXCHG8_DAG)
   NODE_NAME_CASE(LCMPXCHG16_DAG)
diff --git a/llvm/lib/Target/X86/X86InstrFPStack.td b/llvm/lib/Target/X86/X86InstrFPStack.td
--- a/llvm/lib/Target/X86/X86InstrFPStack.td
+++ b/llvm/lib/Target/X86/X86InstrFPStack.td
@@ -23,7 +23,7 @@
 def SDTX86Fild      : SDTypeProfile<1, 1, [SDTCisFP<0>, SDTCisPtrTy<1>]>;
 def SDTX86Fist      : SDTypeProfile<0, 2, [SDTCisFP<0>, SDTCisPtrTy<1>]>;
 
-def SDTX86CwdStore  : SDTypeProfile<0, 1, [SDTCisPtrTy<0>]>;
+def SDTX86FPEnv     : SDTypeProfile<0, 1, [SDTCisPtrTy<0>]>;
 
 def X86fld          : SDNode<"X86ISD::FLD", SDTX86Fld,
                              [SDNPHasChain, SDNPMayLoad, SDNPMemOperand]>;
@@ -35,9 +35,15 @@
                              [SDNPHasChain, SDNPMayStore, SDNPMemOperand]>;
 def X86fp_to_mem : SDNode<"X86ISD::FP_TO_INT_IN_MEM", SDTX86Fst,
                           [SDNPHasChain, SDNPMayStore, SDNPMemOperand]>;
-def X86fp_cwd_get16 : SDNode<"X86ISD::FNSTCW16m",          SDTX86CwdStore,
+def X86fp_cwd_get16 : SDNode<"X86ISD::FNSTCW16m",          SDTX86FPEnv,
                              [SDNPHasChain, SDNPMayStore, SDNPSideEffect,
                               SDNPMemOperand]>;
+def X86fpenv_get    : SDNode<"X86ISD::FNSTENV",            SDTX86FPEnv,
+                             [SDNPHasChain, SDNPMayStore, SDNPSideEffect,
+                              SDNPMemOperand]>;
+def X86fpenv_set    : SDNode<"X86ISD::FLDENV",             SDTX86FPEnv,
+                             [SDNPHasChain, SDNPMayLoad, SDNPSideEffect,
+                              SDNPMemOperand]>;
 
 def X86fstf32 : PatFrag<(ops node:$val, node:$ptr),
                         (X86fst node:$val, node:$ptr), [{
@@ -391,13 +397,15 @@
 
 let SchedRW = [WriteMicrocoded] in {
 let Defs = [FPSW, FPCW] in {
-def FLDENVm  : FPI<0xD9, MRM4m, (outs), (ins f32mem:$src), "fldenv\t$src">;
-def FRSTORm  : FPI<0xDD, MRM4m, (outs), (ins f32mem:$dst), "frstor\t$dst">;
+def FLDENVm  : I<0xD9, MRM4m, (outs), (ins f32mem:$src), "fldenv\t$src",
+                 [(X86fpenv_set addr:$src)]>;
+def FRSTORm  : I<0xDD, MRM4m, (outs), (ins f32mem:$dst), "frstor\t$dst", []>;
 }
 
 let Defs = [FPSW, FPCW], Uses = [FPSW, FPCW] in {
-def FSTENVm  : FPI<0xD9, MRM6m, (outs), (ins f32mem:$dst), "fnstenv\t$dst">;
-def FSAVEm   : FPI<0xDD, MRM6m, (outs), (ins f32mem:$dst), "fnsave\t$dst">;
+def FSTENVm  : I<0xD9, MRM6m, (outs), (ins f32mem:$dst), "fnstenv\t$dst",
+                 [(X86fpenv_get addr:$dst)]>;
+def FSAVEm   : I<0xDD, MRM6m, (outs), (ins f32mem:$dst), "fnsave\t$dst", []>;
 }
 
 let Uses = [FPSW] in
diff --git a/llvm/lib/Target/X86/X86SelectionDAGInfo.h b/llvm/lib/Target/X86/X86SelectionDAGInfo.h
--- a/llvm/lib/Target/X86/X86SelectionDAGInfo.h
+++ b/llvm/lib/Target/X86/X86SelectionDAGInfo.h
@@ -37,6 +37,17 @@
                                   bool AlwaysInline,
                                   MachinePointerInfo DstPtrInfo,
                                   MachinePointerInfo SrcPtrInfo) const override;
+
+  SDValue emitTargetCodeForGetFPEnv(SelectionDAG &DAG, const SDLoc &DL,
+                                    SDValue Chain, SDValue Addr,
+                                    MachinePointerInfo PtrInfo) const override;
+
+  SDValue emitTargetCodeForSetFPEnv(SelectionDAG &DAG, const SDLoc &DL,
+                                    SDValue Chain, SDValue Addr,
+                                    MachinePointerInfo PtrInfo) const override;
+
+  SDValue emitTargetCodeForResetFPEnv(SelectionDAG &DAG, const SDLoc &DL,
+                                      SDValue Chain) const override;
 };
 
 }
diff --git a/llvm/lib/Target/X86/X86SelectionDAGInfo.cpp b/llvm/lib/Target/X86/X86SelectionDAGInfo.cpp
--- a/llvm/lib/Target/X86/X86SelectionDAGInfo.cpp
+++ b/llvm/lib/Target/X86/X86SelectionDAGInfo.cpp
@@ -19,6 +19,8 @@
 #include "llvm/CodeGen/SelectionDAG.h"
 #include "llvm/CodeGen/TargetLowering.h"
 #include "llvm/IR/DerivedTypes.h"
+#include "llvm/IR/IntrinsicsX86.h"
+#include "llvm/IR/Module.h"
 
 using namespace llvm;
 
@@ -316,3 +318,91 @@
 
   return SDValue();
 }
+
+// Size of X87 environment.
+const unsigned X87StateSize = 28;
+
+SDValue X86SelectionDAGInfo::emitTargetCodeForGetFPEnv(
+    SelectionDAG &DAG, const SDLoc &DL, SDValue Chain, SDValue Addr,
+    MachinePointerInfo PtrInfo) const {
+  MachineFunction &MF = DAG.getMachineFunction();
+
+  // Get X87 state.
+  MachineMemOperand *X87EnvMMO = MF.getMachineMemOperand(
+      PtrInfo, MachineMemOperand::MOStore, X87StateSize, Align(4));
+  Chain = DAG.getMemIntrinsicNode(
+      X86ISD::FNSTENV, DL, DAG.getVTList(MVT::Other), {Chain, Addr}, MVT::i32,
+      X87EnvMMO);
+  // FNSTENV changes the exception mask, so load back the stored environment.
+  Chain = DAG.getMemIntrinsicNode(
+      X86ISD::FLDENV, DL, DAG.getVTList(MVT::Other), { Chain, Addr }, MVT::i32,
+      X87EnvMMO);
+
+  // If target supports SSE, get MXCSR as well.
+  if (DAG.getSubtarget().hasFeature(X86::FeatureSSE1)) {
+    SDValue MXCSRAddr = DAG.getNode(
+        ISD::ADD, DL, Addr.getValueType(), Addr,
+        DAG.getConstant(X87StateSize, DL, Addr.getValueType()));
+    // Store MXCSR into memory.
+    Chain = DAG.getNode(
+        ISD::INTRINSIC_VOID, DL, DAG.getVTList(MVT::Other), Chain,
+        DAG.getTargetConstant(Intrinsic::x86_sse_stmxcsr, DL, MVT::i32),
+        MXCSRAddr);
+  }
+
+  return Chain;
+}
+
+SDValue X86SelectionDAGInfo::emitTargetCodeForSetFPEnv(
+    SelectionDAG &DAG, const SDLoc &DL, SDValue Chain, SDValue Addr,
+    MachinePointerInfo PtrInfo) const {
+  MachineFunction &MF = DAG.getMachineFunction();
+
+  // Get X87 state.
+  SDValue Ops[] = {Chain, Addr};
+  MachineMemOperand *X87EnvMMO = MF.getMachineMemOperand(
+      PtrInfo, MachineMemOperand::MOLoad, X87StateSize, Align(4));
+  Chain = DAG.getMemIntrinsicNode(
+      X86ISD::FLDENV, DL, DAG.getVTList(MVT::Other), Ops, MVT::i32, X87EnvMMO);
+
+  // If target supports SSE, set MXCSR as well.
+  if (DAG.getSubtarget().hasFeature(X86::FeatureSSE1)) {
+    // Get pointer to the MXCSR location in memory.
+    auto PtrVT = MVT::getIntegerVT(DAG.getDataLayout().getPointerSizeInBits());
+    SDValue MXCSRAddr = DAG.getNode(ISD::ADD, DL, PtrVT, Addr,
+                                    DAG.getConstant(X87StateSize, DL, PtrVT));
+    // Load MXCSR from memory.
+    Chain = DAG.getNode(
+        ISD::INTRINSIC_VOID, DL, DAG.getVTList(MVT::Other), Chain,
+        DAG.getTargetConstant(Intrinsic::x86_sse_ldmxcsr, DL, MVT::i32),
+        MXCSRAddr);
+  }
+
+  return Chain;
+}
+
+SDValue X86SelectionDAGInfo::emitTargetCodeForResetFPEnv(
+    SelectionDAG &DAG, const SDLoc &DL, SDValue Chain) const {
+//   Module &M = *DAG.getMachineFunction().getFunction().getParent();
+//   Type *EnvType = ArrayType::get(Type::getInt8PtrTy(M.getContext()), X87StateSize);
+//   M.getOrInsertGlobal("__x86_fe_dfl_env", EnvType);
+  IntegerType *ItemTy = Type::getInt32Ty(*DAG.getContext());
+  ArrayType *FPEnvTy = ArrayType::get(ItemTy, 8);
+  SmallVector<Constant *, 8> FPEnvVals;
+  // x87 FPU Control Word: mask all floating-point exceptions, sets rounding to
+  // nearest, and sets the x87 FPU precision to 64 bits.
+  FPEnvVals.push_back(ConstantInt::get(ItemTy, 0x37F));
+  Constant *Zero = ConstantInt::get(ItemTy, 0);
+  for (unsigned I = 0; I < 6; ++I)
+    FPEnvVals.push_back(Zero);
+  // MXCSR: mask all floating-point exceptions, sets rounding to nearest, clear
+  // all exceptions, sets DAZ and FTZ to 0.
+  FPEnvVals.push_back(ConstantInt::get(ItemTy, 0x1F80));
+  Constant *FPEnvBits = ConstantArray::get(FPEnvTy, FPEnvVals);
+  MVT PVT = DAG.getTargetLoweringInfo().getPointerTy(DAG.getDataLayout());
+  SDValue CP = DAG.getConstantPool(FPEnvBits, PVT);
+  MachinePointerInfo MPI =
+      MachinePointerInfo::getConstantPool(DAG.getMachineFunction());
+
+  return emitTargetCodeForSetFPEnv(DAG, DL, Chain, CP, MPI);
+}
diff --git a/llvm/test/CodeGen/X86/fpenv.ll b/llvm/test/CodeGen/X86/fpenv.ll
new file mode 100644
--- /dev/null
+++ b/llvm/test/CodeGen/X86/fpenv.ll
@@ -0,0 +1,78 @@
+; RUN: llc -mtriple=i686-unknown-linux-gnu -mattr=-sse -verify-machineinstrs < %s | FileCheck %s -check-prefixes=CHECK,X86-NOSSE
+; RUN: llc -mtriple=i686-unknown-linux-gnu -mattr=+sse -verify-machineinstrs < %s | FileCheck %s -check-prefixes=CHECK,X86-SSE
+; RUN: llc -mtriple=x86_64-unknown-linux-gnu -verify-machineinstrs < %s | FileCheck %s -check-prefixes=CHECK,X64
+
+
+define void @func_01(i8* %fpenv) {
+entry:
+  call void @llvm.get.fpenv(i8* %fpenv)
+  ret void
+}
+; CHECK-LABEL: func_01:
+
+; X86-NOSSE:      fnstenv (%eax)
+; X86-NOSSE-NEXT: fldenv  (%eax)
+; X86-NOSSE-NEXT: retl
+
+; X86-SSE:        fnstenv (%eax)
+; X86-SSE-NEXT:   fldenv  (%eax)
+; X86-SSE-NEXT:   stmxcsr 28(%eax)
+; X86-SSE-NEXT:   retl
+
+; X64:            fnstenv (%rdi)
+; X64-NEXT:       fldenv  (%rdi)
+; X64-NEXT:       stmxcsr 28(%rdi)
+; X64-NEXT:       retq
+
+
+define void @func_02(i8* %fpenv) {
+entry:
+  call void @llvm.set.fpenv(i8* %fpenv)
+  ret void
+}
+; CHECK-LABEL: func_02:
+
+; X86-NOSSE:       fldenv (%eax)
+; X86-NOSSE-NEXT:  retl
+
+; X86-SSE:         fldenv  (%eax)
+; X86-SSE-NEXT:    ldmxcsr 28(%eax)
+; X86-SSE-NEXT:    retl
+
+; X64:             fldenv  (%rdi)
+; X64-NEXT:        ldmxcsr 28(%rdi)
+; X64-NEXT:        retq
+
+
+define void @func_03() {
+entry:
+  call void @llvm.reset.fpenv()
+  ret void
+}
+; CHECK: .LCPI{{.*}}:
+; CHECK: 	.long	895                     # 0x37f
+; CHECK: 	.long	0                       # 0x0
+; CHECK: 	.long	0                       # 0x0
+; CHECK: 	.long	0                       # 0x0
+; CHECK: 	.long	0                       # 0x0
+; CHECK: 	.long	0                       # 0x0
+; CHECK: 	.long	0                       # 0x0
+; CHECK: 	.long	8064                    # 0x1f80
+
+; CHECK-LABEL: func_03:
+
+; X86-NOSSE:      fldenv	 .LCPI
+; X86-NOSSE-NEXT: retl
+
+; X86-SSE:        fldenv	 .LCPI
+; X86-SSE-NEXT:	  ldmxcsr .LCPI{{.*}}+28
+; X86-SSE-NEXT:   retl
+
+; X64:            fldenv  .LCPI{{.*}}
+; X64-NEXT:       ldmxcsr .LCPI{{.*}}+28
+; X64-NEXT:       retq
+
+
+declare void @llvm.get.fpenv(i8* %fpenv)
+declare void @llvm.set.fpenv(i8* %fpenv)
+declare void @llvm.reset.fpenv()
diff --git a/llvm/test/tools/llvm-mca/X86/Atom/resources-x87.s b/llvm/test/tools/llvm-mca/X86/Atom/resources-x87.s
--- a/llvm/test/tools/llvm-mca/X86/Atom/resources-x87.s
+++ b/llvm/test/tools/llvm-mca/X86/Atom/resources-x87.s
@@ -280,7 +280,7 @@
 # CHECK-NEXT:  1      1     1.00    *             U     fldl	(%ecx)
 # CHECK-NEXT:  1      4     2.00    *             U     fldt	(%eax)
 # CHECK-NEXT:  1      5     2.50    *             U     fldcw	(%eax)
-# CHECK-NEXT:  1      100   0.50                  U     fldenv	(%eax)
+# CHECK-NEXT:  1      100   0.50    *             U     fldenv	(%eax)
 # CHECK-NEXT:  1      6     3.00                  U     fld1
 # CHECK-NEXT:  1      10    5.00                  U     fldl2e
 # CHECK-NEXT:  1      10    5.00                  U     fldl2t
@@ -316,7 +316,7 @@
 # CHECK-NEXT:  1      2     1.00           *      U     fstpl	(%ecx)
 # CHECK-NEXT:  1      5     2.50           *      U     fstpt	(%eax)
 # CHECK-NEXT:  1      8     4.00           *      U     fnstcw	(%eax)
-# CHECK-NEXT:  1      100   0.50                  U     fnstenv	(%eax)
+# CHECK-NEXT:  1      100   0.50           *      U     fnstenv	(%eax)
 # CHECK-NEXT:  1      100   0.50                  U     fnstsw	(%eax)
 # CHECK-NEXT:  1      100   0.50                  U     frstor	(%eax)
 # CHECK-NEXT:  1      1     0.50                  U     wait
diff --git a/llvm/test/tools/llvm-mca/X86/Barcelona/resources-x87.s b/llvm/test/tools/llvm-mca/X86/Barcelona/resources-x87.s
--- a/llvm/test/tools/llvm-mca/X86/Barcelona/resources-x87.s
+++ b/llvm/test/tools/llvm-mca/X86/Barcelona/resources-x87.s
@@ -280,7 +280,7 @@
 # CHECK-NEXT:  3      9     1.00    *             U     fldl	(%ecx)
 # CHECK-NEXT:  3      9     1.00    *             U     fldt	(%eax)
 # CHECK-NEXT:  5      8     2.00    *             U     fldcw	(%eax)
-# CHECK-NEXT:  1      100   0.33                  U     fldenv	(%eax)
+# CHECK-NEXT:  1      100   0.33    *             U     fldenv	(%eax)
 # CHECK-NEXT:  2      1     1.00                  U     fld1
 # CHECK-NEXT:  2      1     1.00                  U     fldl2e
 # CHECK-NEXT:  2      1     1.00                  U     fldl2t
@@ -316,7 +316,7 @@
 # CHECK-NEXT:  3      6     1.00           *      U     fstpl	(%ecx)
 # CHECK-NEXT:  3      6     1.00           *      U     fstpt	(%eax)
 # CHECK-NEXT:  4      7     1.00           *      U     fnstcw	(%eax)
-# CHECK-NEXT:  1      100   0.33                  U     fnstenv	(%eax)
+# CHECK-NEXT:  1      100   0.33           *      U     fnstenv	(%eax)
 # CHECK-NEXT:  4      7     1.00                  U     fnstsw	(%eax)
 # CHECK-NEXT:  1      100   0.33                  U     frstor	(%eax)
 # CHECK-NEXT:  1      100   0.33                  U     wait
diff --git a/llvm/test/tools/llvm-mca/X86/BdVer2/resources-x87.s b/llvm/test/tools/llvm-mca/X86/BdVer2/resources-x87.s
--- a/llvm/test/tools/llvm-mca/X86/BdVer2/resources-x87.s
+++ b/llvm/test/tools/llvm-mca/X86/BdVer2/resources-x87.s
@@ -280,7 +280,7 @@
 # CHECK-NEXT:  1      5     1.00    *             U     fldl	(%ecx)
 # CHECK-NEXT:  1      5     1.00    *             U     fldt	(%eax)
 # CHECK-NEXT:  1      5     1.00    *             U     fldcw	(%eax)
-# CHECK-NEXT:  1      100   0.50                  U     fldenv	(%eax)
+# CHECK-NEXT:  1      100   0.50    *             U     fldenv	(%eax)
 # CHECK-NEXT:  1      3     1.00                  U     fld1
 # CHECK-NEXT:  1      3     1.00                  U     fldl2e
 # CHECK-NEXT:  1      3     1.00                  U     fldl2t
@@ -316,7 +316,7 @@
 # CHECK-NEXT:  1      1     1.00           *      U     fstpl	(%ecx)
 # CHECK-NEXT:  1      1     1.00           *      U     fstpt	(%eax)
 # CHECK-NEXT:  1      1     1.00           *      U     fnstcw	(%eax)
-# CHECK-NEXT:  1      100   0.50                  U     fnstenv	(%eax)
+# CHECK-NEXT:  1      100   0.50           *      U     fnstenv	(%eax)
 # CHECK-NEXT:  1      100   0.50                  U     fnstsw	(%eax)
 # CHECK-NEXT:  1      100   0.50                  U     frstor	(%eax)
 # CHECK-NEXT:  1      100   0.50                  U     wait
diff --git a/llvm/test/tools/llvm-mca/X86/Broadwell/resources-x87.s b/llvm/test/tools/llvm-mca/X86/Broadwell/resources-x87.s
--- a/llvm/test/tools/llvm-mca/X86/Broadwell/resources-x87.s
+++ b/llvm/test/tools/llvm-mca/X86/Broadwell/resources-x87.s
@@ -280,7 +280,7 @@
 # CHECK-NEXT:  1      6     0.50    *             U     fldl	(%ecx)
 # CHECK-NEXT:  1      6     0.50    *             U     fldt	(%eax)
 # CHECK-NEXT:  3      7     1.00    *             U     fldcw	(%eax)
-# CHECK-NEXT:  64     60    14.00                 U     fldenv	(%eax)
+# CHECK-NEXT:  64     60    14.00   *             U     fldenv	(%eax)
 # CHECK-NEXT:  2      1     1.00                  U     fld1
 # CHECK-NEXT:  2      1     1.00                  U     fldl2e
 # CHECK-NEXT:  2      1     1.00                  U     fldl2t
@@ -316,7 +316,7 @@
 # CHECK-NEXT:  2      1     1.00           *      U     fstpl	(%ecx)
 # CHECK-NEXT:  2      1     1.00           *      U     fstpt	(%eax)
 # CHECK-NEXT:  3      2     1.00           *      U     fnstcw	(%eax)
-# CHECK-NEXT:  100    115   19.50                 U     fnstenv	(%eax)
+# CHECK-NEXT:  100    115   19.50          *      U     fnstenv	(%eax)
 # CHECK-NEXT:  3      4     1.00                  U     fnstsw	(%eax)
 # CHECK-NEXT:  1      100   0.25                  U     frstor	(%eax)
 # CHECK-NEXT:  2      2     0.50                  U     wait
diff --git a/llvm/test/tools/llvm-mca/X86/BtVer2/resources-x87.s b/llvm/test/tools/llvm-mca/X86/BtVer2/resources-x87.s
--- a/llvm/test/tools/llvm-mca/X86/BtVer2/resources-x87.s
+++ b/llvm/test/tools/llvm-mca/X86/BtVer2/resources-x87.s
@@ -280,7 +280,7 @@
 # CHECK-NEXT:  1      3     1.00    *             U     fldl	(%ecx)
 # CHECK-NEXT:  1      3     1.00    *             U     fldt	(%eax)
 # CHECK-NEXT:  1      3     1.00    *             U     fldcw	(%eax)
-# CHECK-NEXT:  1      100   0.50                  U     fldenv	(%eax)
+# CHECK-NEXT:  1      100   0.50    *             U     fldenv	(%eax)
 # CHECK-NEXT:  1      3     1.00                  U     fld1
 # CHECK-NEXT:  1      3     1.00                  U     fldl2e
 # CHECK-NEXT:  1      3     1.00                  U     fldl2t
@@ -316,7 +316,7 @@
 # CHECK-NEXT:  1      1     1.00           *      U     fstpl	(%ecx)
 # CHECK-NEXT:  1      1     1.00           *      U     fstpt	(%eax)
 # CHECK-NEXT:  1      1     0.50           *      U     fnstcw	(%eax)
-# CHECK-NEXT:  1      100   0.50                  U     fnstenv	(%eax)
+# CHECK-NEXT:  1      100   0.50           *      U     fnstenv	(%eax)
 # CHECK-NEXT:  1      100   0.50                  U     fnstsw	(%eax)
 # CHECK-NEXT:  1      100   0.50                  U     frstor	(%eax)
 # CHECK-NEXT:  1      100   0.50                  U     wait
diff --git a/llvm/test/tools/llvm-mca/X86/Generic/resources-x87.s b/llvm/test/tools/llvm-mca/X86/Generic/resources-x87.s
--- a/llvm/test/tools/llvm-mca/X86/Generic/resources-x87.s
+++ b/llvm/test/tools/llvm-mca/X86/Generic/resources-x87.s
@@ -280,7 +280,7 @@
 # CHECK-NEXT:  3      9     1.00    *             U     fldl	(%ecx)
 # CHECK-NEXT:  3      9     1.00    *             U     fldt	(%eax)
 # CHECK-NEXT:  5      8     2.00    *             U     fldcw	(%eax)
-# CHECK-NEXT:  1      100   0.33                  U     fldenv	(%eax)
+# CHECK-NEXT:  1      100   0.33    *             U     fldenv	(%eax)
 # CHECK-NEXT:  2      1     1.00                  U     fld1
 # CHECK-NEXT:  2      1     1.00                  U     fldl2e
 # CHECK-NEXT:  2      1     1.00                  U     fldl2t
@@ -316,7 +316,7 @@
 # CHECK-NEXT:  3      6     1.00           *      U     fstpl	(%ecx)
 # CHECK-NEXT:  3      6     1.00           *      U     fstpt	(%eax)
 # CHECK-NEXT:  4      7     1.00           *      U     fnstcw	(%eax)
-# CHECK-NEXT:  1      100   0.33                  U     fnstenv	(%eax)
+# CHECK-NEXT:  1      100   0.33           *      U     fnstenv	(%eax)
 # CHECK-NEXT:  4      7     1.00                  U     fnstsw	(%eax)
 # CHECK-NEXT:  1      100   0.33                  U     frstor	(%eax)
 # CHECK-NEXT:  1      100   0.33                  U     wait
diff --git a/llvm/test/tools/llvm-mca/X86/Haswell/resources-x87.s b/llvm/test/tools/llvm-mca/X86/Haswell/resources-x87.s
--- a/llvm/test/tools/llvm-mca/X86/Haswell/resources-x87.s
+++ b/llvm/test/tools/llvm-mca/X86/Haswell/resources-x87.s
@@ -280,7 +280,7 @@
 # CHECK-NEXT:  1      7     0.50    *             U     fldl	(%ecx)
 # CHECK-NEXT:  1      7     0.50    *             U     fldt	(%eax)
 # CHECK-NEXT:  3      7     1.00    *             U     fldcw	(%eax)
-# CHECK-NEXT:  64     61    14.00                 U     fldenv	(%eax)
+# CHECK-NEXT:  64     61    14.00   *             U     fldenv	(%eax)
 # CHECK-NEXT:  2      1     1.00                  U     fld1
 # CHECK-NEXT:  2      1     1.00                  U     fldl2e
 # CHECK-NEXT:  2      1     1.00                  U     fldl2t
@@ -316,7 +316,7 @@
 # CHECK-NEXT:  2      1     1.00           *      U     fstpl	(%ecx)
 # CHECK-NEXT:  2      1     1.00           *      U     fstpt	(%eax)
 # CHECK-NEXT:  3      2     1.00           *      U     fnstcw	(%eax)
-# CHECK-NEXT:  100    115   19.50                 U     fnstenv	(%eax)
+# CHECK-NEXT:  100    115   19.50          *      U     fnstenv	(%eax)
 # CHECK-NEXT:  3      4     1.00                  U     fnstsw	(%eax)
 # CHECK-NEXT:  90     1     22.50                 U     frstor	(%eax)
 # CHECK-NEXT:  2      2     0.50                  U     wait
diff --git a/llvm/test/tools/llvm-mca/X86/SLM/resources-x87.s b/llvm/test/tools/llvm-mca/X86/SLM/resources-x87.s
--- a/llvm/test/tools/llvm-mca/X86/SLM/resources-x87.s
+++ b/llvm/test/tools/llvm-mca/X86/SLM/resources-x87.s
@@ -280,7 +280,7 @@
 # CHECK-NEXT:  1      3     1.00    *             U     fldl	(%ecx)
 # CHECK-NEXT:  1      3     1.00    *             U     fldt	(%eax)
 # CHECK-NEXT:  1      3     1.00    *             U     fldcw	(%eax)
-# CHECK-NEXT:  1      100   1.00                  U     fldenv	(%eax)
+# CHECK-NEXT:  1      100   1.00    *             U     fldenv	(%eax)
 # CHECK-NEXT:  1      1     0.50                  U     fld1
 # CHECK-NEXT:  2      1     1.00                  U     fldl2e
 # CHECK-NEXT:  2      1     1.00                  U     fldl2t
@@ -316,7 +316,7 @@
 # CHECK-NEXT:  1      1     1.00           *      U     fstpl	(%ecx)
 # CHECK-NEXT:  1      1     1.00           *      U     fstpt	(%eax)
 # CHECK-NEXT:  1      1     0.50           *      U     fnstcw	(%eax)
-# CHECK-NEXT:  1      100   1.00                  U     fnstenv	(%eax)
+# CHECK-NEXT:  1      100   1.00           *      U     fnstenv	(%eax)
 # CHECK-NEXT:  1      100   1.00                  U     fnstsw	(%eax)
 # CHECK-NEXT:  1      100   1.00                  U     frstor	(%eax)
 # CHECK-NEXT:  1      100   1.00                  U     wait
diff --git a/llvm/test/tools/llvm-mca/X86/SandyBridge/resources-x87.s b/llvm/test/tools/llvm-mca/X86/SandyBridge/resources-x87.s
--- a/llvm/test/tools/llvm-mca/X86/SandyBridge/resources-x87.s
+++ b/llvm/test/tools/llvm-mca/X86/SandyBridge/resources-x87.s
@@ -280,7 +280,7 @@
 # CHECK-NEXT:  3      9     1.00    *             U     fldl	(%ecx)
 # CHECK-NEXT:  3      9     1.00    *             U     fldt	(%eax)
 # CHECK-NEXT:  5      8     2.00    *             U     fldcw	(%eax)
-# CHECK-NEXT:  1      100   0.33                  U     fldenv	(%eax)
+# CHECK-NEXT:  1      100   0.33    *             U     fldenv	(%eax)
 # CHECK-NEXT:  2      1     1.00                  U     fld1
 # CHECK-NEXT:  2      1     1.00                  U     fldl2e
 # CHECK-NEXT:  2      1     1.00                  U     fldl2t
@@ -316,7 +316,7 @@
 # CHECK-NEXT:  3      6     1.00           *      U     fstpl	(%ecx)
 # CHECK-NEXT:  3      6     1.00           *      U     fstpt	(%eax)
 # CHECK-NEXT:  4      7     1.00           *      U     fnstcw	(%eax)
-# CHECK-NEXT:  1      100   0.33                  U     fnstenv	(%eax)
+# CHECK-NEXT:  1      100   0.33           *      U     fnstenv	(%eax)
 # CHECK-NEXT:  4      7     1.00                  U     fnstsw	(%eax)
 # CHECK-NEXT:  1      100   0.33                  U     frstor	(%eax)
 # CHECK-NEXT:  1      100   0.33                  U     wait
diff --git a/llvm/test/tools/llvm-mca/X86/SkylakeClient/resources-x87.s b/llvm/test/tools/llvm-mca/X86/SkylakeClient/resources-x87.s
--- a/llvm/test/tools/llvm-mca/X86/SkylakeClient/resources-x87.s
+++ b/llvm/test/tools/llvm-mca/X86/SkylakeClient/resources-x87.s
@@ -280,7 +280,7 @@
 # CHECK-NEXT:  1      7     0.50    *             U     fldl	(%ecx)
 # CHECK-NEXT:  1      7     0.50    *             U     fldt	(%eax)
 # CHECK-NEXT:  3      7     1.00    *             U     fldcw	(%eax)
-# CHECK-NEXT:  64     62    14.00                 U     fldenv	(%eax)
+# CHECK-NEXT:  64     62    14.00   *             U     fldenv	(%eax)
 # CHECK-NEXT:  2      1     1.00                  U     fld1
 # CHECK-NEXT:  2      1     1.00                  U     fldl2e
 # CHECK-NEXT:  2      1     1.00                  U     fldl2t
@@ -316,7 +316,7 @@
 # CHECK-NEXT:  2      1     1.00           *      U     fstpl	(%ecx)
 # CHECK-NEXT:  2      1     1.00           *      U     fstpt	(%eax)
 # CHECK-NEXT:  3      2     1.00           *      U     fnstcw	(%eax)
-# CHECK-NEXT:  100    106   19.50                 U     fnstenv	(%eax)
+# CHECK-NEXT:  100    106   19.50          *      U     fnstenv	(%eax)
 # CHECK-NEXT:  3      3     1.00                  U     fnstsw	(%eax)
 # CHECK-NEXT:  1      100   0.25                  U     frstor	(%eax)
 # CHECK-NEXT:  2      2     0.50                  U     wait
diff --git a/llvm/test/tools/llvm-mca/X86/SkylakeServer/resources-x87.s b/llvm/test/tools/llvm-mca/X86/SkylakeServer/resources-x87.s
--- a/llvm/test/tools/llvm-mca/X86/SkylakeServer/resources-x87.s
+++ b/llvm/test/tools/llvm-mca/X86/SkylakeServer/resources-x87.s
@@ -280,7 +280,7 @@
 # CHECK-NEXT:  1      7     0.50    *             U     fldl	(%ecx)
 # CHECK-NEXT:  1      7     0.50    *             U     fldt	(%eax)
 # CHECK-NEXT:  3      7     1.00    *             U     fldcw	(%eax)
-# CHECK-NEXT:  64     62    14.00                 U     fldenv	(%eax)
+# CHECK-NEXT:  64     62    14.00   *             U     fldenv	(%eax)
 # CHECK-NEXT:  2      1     1.00                  U     fld1
 # CHECK-NEXT:  2      1     1.00                  U     fldl2e
 # CHECK-NEXT:  2      1     1.00                  U     fldl2t
@@ -316,7 +316,7 @@
 # CHECK-NEXT:  2      1     1.00           *      U     fstpl	(%ecx)
 # CHECK-NEXT:  2      1     1.00           *      U     fstpt	(%eax)
 # CHECK-NEXT:  3      2     1.00           *      U     fnstcw	(%eax)
-# CHECK-NEXT:  100    106   19.50                 U     fnstenv	(%eax)
+# CHECK-NEXT:  100    106   19.50          *      U     fnstenv	(%eax)
 # CHECK-NEXT:  3      3     1.00                  U     fnstsw	(%eax)
 # CHECK-NEXT:  1      100   0.25                  U     frstor	(%eax)
 # CHECK-NEXT:  2      2     0.50                  U     wait
diff --git a/llvm/test/tools/llvm-mca/X86/Znver1/resources-x87.s b/llvm/test/tools/llvm-mca/X86/Znver1/resources-x87.s
--- a/llvm/test/tools/llvm-mca/X86/Znver1/resources-x87.s
+++ b/llvm/test/tools/llvm-mca/X86/Znver1/resources-x87.s
@@ -280,7 +280,7 @@
 # CHECK-NEXT:  1      8     0.50    *             U     fldl	(%ecx)
 # CHECK-NEXT:  2      1     0.50    *             U     fldt	(%eax)
 # CHECK-NEXT:  1      100   0.25    *             U     fldcw	(%eax)
-# CHECK-NEXT:  1      100   0.25                  U     fldenv	(%eax)
+# CHECK-NEXT:  1      100   0.25    *             U     fldenv	(%eax)
 # CHECK-NEXT:  1      11    1.00                  U     fld1
 # CHECK-NEXT:  1      11    1.00                  U     fldl2e
 # CHECK-NEXT:  1      11    1.00                  U     fldl2t
@@ -316,7 +316,7 @@
 # CHECK-NEXT:  1      1     0.50           *      U     fstpl	(%ecx)
 # CHECK-NEXT:  1      5     0.50           *      U     fstpt	(%eax)
 # CHECK-NEXT:  1      100   0.25           *      U     fnstcw	(%eax)
-# CHECK-NEXT:  1      100   0.25                  U     fnstenv	(%eax)
+# CHECK-NEXT:  1      100   0.25           *      U     fnstenv	(%eax)
 # CHECK-NEXT:  1      100   0.25                  U     fnstsw	(%eax)
 # CHECK-NEXT:  1      100   0.25                  U     frstor	(%eax)
 # CHECK-NEXT:  1      1     1.00                  U     wait
diff --git a/llvm/test/tools/llvm-mca/X86/Znver2/resources-x87.s b/llvm/test/tools/llvm-mca/X86/Znver2/resources-x87.s
--- a/llvm/test/tools/llvm-mca/X86/Znver2/resources-x87.s
+++ b/llvm/test/tools/llvm-mca/X86/Znver2/resources-x87.s
@@ -280,7 +280,7 @@
 # CHECK-NEXT:  1      8     0.33    *             U     fldl	(%ecx)
 # CHECK-NEXT:  2      1     0.50    *             U     fldt	(%eax)
 # CHECK-NEXT:  1      100   0.25    *             U     fldcw	(%eax)
-# CHECK-NEXT:  1      100   0.25                  U     fldenv	(%eax)
+# CHECK-NEXT:  1      100   0.25    *             U     fldenv	(%eax)
 # CHECK-NEXT:  1      11    1.00                  U     fld1
 # CHECK-NEXT:  1      11    1.00                  U     fldl2e
 # CHECK-NEXT:  1      11    1.00                  U     fldl2t
@@ -316,7 +316,7 @@
 # CHECK-NEXT:  1      1     0.33           *      U     fstpl	(%ecx)
 # CHECK-NEXT:  1      5     0.50           *      U     fstpt	(%eax)
 # CHECK-NEXT:  1      100   0.25           *      U     fnstcw	(%eax)
-# CHECK-NEXT:  1      100   0.25                  U     fnstenv	(%eax)
+# CHECK-NEXT:  1      100   0.25           *      U     fnstenv	(%eax)
 # CHECK-NEXT:  1      100   0.25                  U     fnstsw	(%eax)
 # CHECK-NEXT:  1      100   0.25                  U     frstor	(%eax)
 # CHECK-NEXT:  1      1     1.00                  U     wait