Index: llvm/trunk/lib/Transforms/Utils/LoopUnroll.cpp
===================================================================
--- llvm/trunk/lib/Transforms/Utils/LoopUnroll.cpp
+++ llvm/trunk/lib/Transforms/Utils/LoopUnroll.cpp
@@ -402,7 +402,8 @@
     // counts. If we later unroll the loop, we want these to be updated.
     if (Peeled) {
       // According to our guards and profitability checks the only
-      // meaningful exit should be latch block.
+      // meaningful exit should be latch block. Other exits go to deopt,
+      // so we do not worry about them.
       BasicBlock *ExitingBlock = L->getLoopLatch();
       assert(ExitingBlock && "Loop without exiting block?");
       assert(L->isLoopExiting(ExitingBlock) && "Latch is not exiting?");
Index: llvm/trunk/lib/Transforms/Utils/LoopUnrollPeel.cpp
===================================================================
--- llvm/trunk/lib/Transforms/Utils/LoopUnrollPeel.cpp
+++ llvm/trunk/lib/Transforms/Utils/LoopUnrollPeel.cpp
@@ -61,6 +61,10 @@
     "unroll-force-peel-count", cl::init(0), cl::Hidden,
     cl::desc("Force a peel count regardless of profiling information."));
 
+static cl::opt<bool> UnrollPeelMultiDeoptExit(
+    "unroll-peel-multi-deopt-exit", cl::init(false), cl::Hidden,
+    cl::desc("Allow peeling of loops with multiple deopt exits."));
+
 // Designates that a Phi is estimated to become invariant after an "infinite"
 // number of loop iterations (i.e. only may become an invariant if the loop is
 // fully unrolled).
@@ -73,6 +77,22 @@
   if (!L->isLoopSimplifyForm())
     return false;
 
+  if (UnrollPeelMultiDeoptExit) {
+    SmallVector<BasicBlock *, 4> Exits;
+    L->getUniqueNonLatchExitBlocks(Exits);
+
+    if (!Exits.empty()) {
+      // Latch's terminator is a conditional branch, Latch is exiting and
+      // all non Latch exits ends up with deoptimize.
+      const BasicBlock *Latch = L->getLoopLatch();
+      const BranchInst *T = dyn_cast<BranchInst>(Latch->getTerminator());
+      return T && T->isConditional() && L->isLoopExiting(Latch) &&
+             all_of(Exits, [](const BasicBlock *BB) {
+               return BB->getTerminatingDeoptimizeCall();
+             });
+    }
+  }
+
   // Only peel loops that contain a single exit
   if (!L->getExitingBlock() || !L->getUniqueExitBlock())
     return false;
Index: llvm/trunk/test/Transforms/LoopUnroll/peel-loop-pgo-deopt.ll
===================================================================
--- llvm/trunk/test/Transforms/LoopUnroll/peel-loop-pgo-deopt.ll
+++ llvm/trunk/test/Transforms/LoopUnroll/peel-loop-pgo-deopt.ll
@@ -0,0 +1,80 @@
+; RUN: opt < %s -S -debug-only=loop-unroll -loop-unroll -unroll-runtime -unroll-peel-multi-deopt-exit 2>&1 | FileCheck %s
+; RUN: opt < %s -S -debug-only=loop-unroll -unroll-peel-multi-deopt-exit -passes='require<profile-summary>,function(require<opt-remark-emit>,unroll)' 2>&1 | FileCheck %s
+
+; Make sure we use the profile information correctly to peel-off 3 iterations
+; from the loop, and update the branch weights for the peeled loop properly.
+
+; CHECK: Loop Unroll: F[basic]
+; CHECK: PEELING loop %for.body with iteration count 3!
+
+; CHECK-LABEL: @basic
+; CHECK: br i1 %{{.*}}, label %[[NEXT0:.*]], label %for.cond.for.end_crit_edge, !prof !16
+; CHECK: [[NEXT0]]:
+; CHECK: br i1 %{{.*}}, label %[[NEXT1:.*]], label %for.cond.for.end_crit_edge, !prof !17
+; CHECK: [[NEXT1]]:
+; CHECK: br i1 %{{.*}}, label %[[NEXT2:.*]], label %for.cond.for.end_crit_edge, !prof !18
+; CHECK: [[NEXT2]]:
+; CHECK: br i1 %{{.*}}, label %for.body, label %{{.*}}, !prof !19
+
+define i32 @basic(i32* %p, i32 %k, i1 %c) #0 !prof !15 {
+entry:
+  %cmp3 = icmp slt i32 0, %k
+  br i1 %cmp3, label %for.body.lr.ph, label %for.end
+
+for.body.lr.ph:                                   ; preds = %entry
+  br label %for.body
+
+for.body:                                         ; preds = %for.body.lr.ph, %for.body
+  %i.05 = phi i32 [ 0, %for.body.lr.ph ], [ %inc, %continue ]
+  %p.addr.04 = phi i32* [ %p, %for.body.lr.ph ], [ %incdec.ptr, %continue ]
+  %incdec.ptr = getelementptr inbounds i32, i32* %p.addr.04, i32 1
+  store i32 %i.05, i32* %p.addr.04, align 4
+  %inc = add nsw i32 %i.05, 1
+  %cmp = icmp slt i32 %inc, %k
+  br i1 %c, label %continue, label %side_exit, !prof !17
+
+continue:
+  br i1 %cmp, label %for.body, label %for.cond.for.end_crit_edge, !prof !16
+
+for.cond.for.end_crit_edge:                       ; preds = %for.body
+  br label %for.end
+
+for.end:                                          ; preds = %for.cond.for.end_crit_edge, %entry
+  %res = phi i32 [ 0, %entry ], [ %inc, %for.cond.for.end_crit_edge ]
+  ret i32 %res
+
+side_exit:
+  %rval = call i32(...) @llvm.experimental.deoptimize.i32() [ "deopt"(i32 %inc) ]
+  ret i32 %rval
+}
+
+declare i32 @llvm.experimental.deoptimize.i32(...)
+
+attributes #0 = { nounwind }
+attributes #1 = { nounwind optsize }
+
+!llvm.module.flags = !{!1}
+
+!1 = !{i32 1, !"ProfileSummary", !2}
+!2 = !{!3, !4, !5, !6, !7, !8, !9, !10}
+!3 = !{!"ProfileFormat", !"InstrProf"}
+!4 = !{!"TotalCount", i64 10}
+!5 = !{!"MaxCount", i64 3}
+!6 = !{!"MaxInternalCount", i64 1}
+!7 = !{!"MaxFunctionCount", i64 3}
+!8 = !{!"NumCounts", i64 2}
+!9 = !{!"NumFunctions", i64 2}
+!10 = !{!"DetailedSummary", !11}
+!11 = !{!12, !13, !14}
+!12 = !{i32 10000, i64 3, i32 2}
+!13 = !{i32 999000, i64 1, i32 10}
+!14 = !{i32 999999, i64 1, i32 10}
+!15 = !{!"function_entry_count", i64 1}
+!16 = !{!"branch_weights", i32 3001, i32 1001}
+!17 = !{!"branch_weights", i32 1, i32 0}
+
+;CHECK: !16 = !{!"branch_weights", i32 900, i32 101}
+;CHECK: !17 = !{!"branch_weights", i32 540, i32 360}
+;CHECK: !18 = !{!"branch_weights", i32 162, i32 378}
+;CHECK: !19 = !{!"branch_weights", i32 1399, i32 162}
+