Index: lib/CodeGen/AsmPrinter/DbgEntityHistoryCalculator.cpp =================================================================== --- lib/CodeGen/AsmPrinter/DbgEntityHistoryCalculator.cpp +++ lib/CodeGen/AsmPrinter/DbgEntityHistoryCalculator.cpp @@ -352,17 +352,43 @@ } } - // Make sure locations for register-described variables are valid only - // until the end of the basic block (unless it's the last basic block, in - // which case let their liveness run off to the end of the function). + // Make sure locations for all variables are valid only until the end of + // the basic block (unless it's the last basic block, in which case let + // their liveness run off to the end of the function). if (!MBB.empty() && &MBB != &MF->back()) { - for (auto I = RegVars.begin(), E = RegVars.end(); I != E;) { - auto CurElem = I++; // CurElem can be erased below. - if (TRI->isVirtualRegister(CurElem->first) || - ChangingRegs.test(CurElem->first)) - clobberRegisterUses(RegVars, CurElem, DbgValues, LiveEntries, - MBB.back()); + // Iterate over all variables that have open debug values. + SmallSet RegsToClobber; + for (auto &Pair : LiveEntries) { + // Iterate over history entries for all open fragments. + SmallVector IdxesToRemove; + for (EntryIndex Idx : Pair.second) { + DbgValueHistoryMap::Entry &Ent = DbgValues.getEntry(Pair.first, Idx); + assert(Ent.isDbgValue() && !Ent.isClosed()); + const MachineInstr *DMI = Ent.getInstr(); + + // If this is a plain register DBG_VALUE, apply some futher tests to + // see if we should clobber it. Perform the clobbering later though, + // to keep LiveEntries iteration stable. + if (DMI->getOperand(0).isReg()) { + unsigned RegNo = DMI->getOperand(0).getReg(); + if (TRI->isVirtualRegister(RegNo) || ChangingRegs.test(RegNo)) + RegsToClobber.insert(RegNo); + } else { + // This is a constant, terminate it at end of the block. Store + // eliminated EntryIdx and delete later, for iteration stability. + EntryIndex ClobIdx = DbgValues.startClobber(Pair.first, MBB.back()); + DbgValues.getEntry(Pair.first, Idx).endEntry(ClobIdx); + IdxesToRemove.push_back(Idx); + } + } + + for (EntryIndex Idx : IdxesToRemove) + Pair.second.erase(Idx); } + + // Implement clobbering of registers at the end of BB. + for (unsigned Reg : RegsToClobber) + clobberRegisterUses(RegVars, Reg, DbgValues, LiveEntries, MBB.back()); } } } Index: lib/CodeGen/LiveDebugValues.cpp =================================================================== --- lib/CodeGen/LiveDebugValues.cpp +++ lib/CodeGen/LiveDebugValues.cpp @@ -143,7 +143,8 @@ enum VarLocKind { InvalidKind = 0, RegisterKind, - SpillLocKind + SpillLocKind, + ImmediateKind } Kind = InvalidKind; /// The value location. Stored separately to avoid repeatedly @@ -152,6 +153,9 @@ uint64_t RegNo; SpillLoc SpillLocation; uint64_t Hash; + int64_t Immediate; + const ConstantFP *FPImm; + const ConstantInt *CImm; } Loc; VarLoc(const MachineInstr &MI, LexicalScopes &LS) @@ -164,6 +168,15 @@ if (int RegNo = isDbgValueDescribedByReg(MI)) { Kind = RegisterKind; Loc.RegNo = RegNo; + } else if (MI.getOperand(0).isImm()) { + Kind = ImmediateKind; + Loc.Immediate = MI.getOperand(0).getImm(); + } else if (MI.getOperand(0).isFPImm()) { + Kind = ImmediateKind; + Loc.FPImm = MI.getOperand(0).getFPImm(); + } else if (MI.getOperand(0).isCImm()) { + Kind = ImmediateKind; + Loc.CImm = MI.getOperand(0).getCImm(); } } @@ -178,6 +191,11 @@ Loc.SpillLocation = {SpillBase, SpillOffset}; } + // Is the Loc field a constant or constant object? + bool isConstant() const { + return Kind == ImmediateKind; + } + /// If this variable is described by a register, return it, /// otherwise return 0. unsigned isDescribedByReg() const { @@ -195,7 +213,8 @@ #endif bool operator==(const VarLoc &Other) const { - return Var == Other.Var && Loc.Hash == Other.Loc.Hash; + return Kind == Other.Kind && Var == Other.Var && + Loc.Hash == Other.Loc.Hash; } /// This operator guarantees that VarLocs are sorted by Variable first. @@ -408,11 +427,23 @@ OpenRanges.erase(V); // Add the VarLoc to OpenRanges from this DBG_VALUE. - // TODO: Currently handles DBG_VALUE which has only reg as location. - if (isDbgValueDescribedByReg(MI)) { + unsigned ID; + if (isDbgValueDescribedByReg(MI) || MI.getOperand(0).isImm() || + MI.getOperand(0).isFPImm() || MI.getOperand(0).isCImm()) { + // Use normal VarLoc constructor for registers and immediates. VarLoc VL(MI, LS); - unsigned ID = VarLocIDs.insert(VL); + ID = VarLocIDs.insert(VL); + OpenRanges.insert(ID, VL.Var); + } else if (MI.hasOneMemOperand()) { + // It's a stack spill -- fetch spill base and offset. + VarLoc::SpillLoc SpillLocation = extractSpillBaseRegAndOffset(MI); + VarLoc VL(MI, SpillLocation.SpillBase, SpillLocation.SpillOffset, LS); + ID = VarLocIDs.insert(VL); OpenRanges.insert(ID, VL.Var); + } else { + // This must be an undefined location. We should leave OpenRanges closed. + assert(MI.getOperand(0).isReg() && MI.getOperand(0).getReg() == 0 && + "Unexpected non-undef DBG_VALUE encountered"); } } @@ -806,12 +837,19 @@ // a new DBG_VALUE. process() will end this range however appropriate. const VarLoc &DiffIt = VarLocIDs[ID]; const MachineInstr *DMI = &DiffIt.MI; - MachineInstr *MI = - BuildMI(MBB, MBB.instr_begin(), DMI->getDebugLoc(), DMI->getDesc(), - DMI->isIndirectDebugValue(), DMI->getOperand(0).getReg(), - DMI->getDebugVariable(), DMI->getDebugExpression()); - if (DMI->isIndirectDebugValue()) - MI->getOperand(1).setImm(DMI->getOperand(1).getImm()); + MachineInstr *MI = nullptr; + if (DiffIt.isConstant()) { + MachineOperand MO(DMI->getOperand(0)); + MI = BuildMI(MBB, MBB.instr_begin(), DMI->getDebugLoc(), DMI->getDesc(), + false, MO, DMI->getDebugVariable(), + DMI->getDebugExpression()); + } else { + MI = BuildMI(MBB, MBB.instr_begin(), DMI->getDebugLoc(), DMI->getDesc(), + DMI->isIndirectDebugValue(), DMI->getOperand(0).getReg(), + DMI->getDebugVariable(), DMI->getDebugExpression()); + if (DMI->isIndirectDebugValue()) + MI->getOperand(1).setImm(DMI->getOperand(1).getImm()); + } LLVM_DEBUG(dbgs() << "Inserted: "; MI->dump();); ILS.set(ID); ++NumInserted; Index: test/DebugInfo/COFF/pieces.ll =================================================================== --- test/DebugInfo/COFF/pieces.ll +++ test/DebugInfo/COFF/pieces.ll @@ -40,9 +40,10 @@ ; ASM: # %bb.2: # %for.body.preheader ; ASM: xorl %edi, %edi ; ASM: xorl %esi, %esi +; ASM: [[oy_ox_start:\.Ltmp[0-9]+]]: ; ASM: .p2align 4, 0x90 ; ASM: .LBB0_3: # %for.body -; ASM: [[oy_ox_start:\.Ltmp[0-9]+]]: +; ASM: #DEBUG_VALUE: loop_csr:o <- [DW_OP_LLVM_fragment 0 32] 0 ; ASM: #DEBUG_VALUE: loop_csr:o <- [DW_OP_LLVM_fragment 0 32] $edi ; ASM: #DEBUG_VALUE: loop_csr:o <- [DW_OP_LLVM_fragment 32 32] $esi ; ASM: .cv_loc 0 1 13 11 # t.c:13:11 @@ -59,13 +60,21 @@ ; ASM: #DEBUG_VALUE: loop_csr:o <- [DW_OP_LLVM_fragment 32 32] $esi ; ASM: cmpl n(%rip), %eax ; ASM: jl .LBB0_3 +; ASM: [[loopskip_start:\.Ltmp[0-9]+]]: +; ASM: #DEBUG_VALUE: loop_csr:o <- [DW_OP_LLVM_fragment 0 32] 0 +; ASM: xorl %esi, %esi +; ASM: xorl %edi, %edi ; ASM: [[oy_end:\.Ltmp[0-9]+]]: ; ASM: addl %edi, %esi ; ASM: movl %esi, %eax +; XXX FIXME: the debug value line after loopskip_start should be repeated +; because both fields of 'o' are zero flowing into this block. However, it +; appears livedebugvalues doesn't account for fragments. ; ASM-LABEL: pad_right: # @pad_right ; ASM: movq %rcx, %rax +; ASM: [[pad_right_tmp:\.Ltmp[0-9]+]]: ; ASM: #DEBUG_VALUE: pad_right:o <- [DW_OP_LLVM_fragment 32 32] $eax ; ASM: retq @@ -73,6 +82,7 @@ ; ASM-LABEL: pad_left: # @pad_left ; ASM: .cv_loc 2 1 24 3 # t.c:24:3 ; ASM: movq %rcx, %rax +; ASM: [[pad_left_tmp:\.Ltmp[0-9]+]]: ; ASM: #DEBUG_VALUE: pad_left:o <- [DW_OP_LLVM_fragment 0 32] $eax ; ASM: retq @@ -104,8 +114,8 @@ ; ASM: .asciz "o" ; ASM: .cv_def_range [[oy_ox_start]] [[ox_start]], "C\021\030\000\000\000\000\000\000\000" ; ASM: .cv_def_range [[oy_ox_start]] [[oy_start]], "C\021\027\000\000\000\004\000\000\000" -; ASM: .cv_def_range [[ox_start]] [[oy_end]], "C\021\030\000\000\000\000\000\000\000" -; ASM: .cv_def_range [[oy_start]] [[oy_end]], "C\021\027\000\000\000\004\000\000\000" +; ASM: .cv_def_range [[ox_start]] [[loopskip_start]], "C\021\030\000\000\000\000\000\000\000" +; ASM: .cv_def_range [[oy_start]] [[loopskip_start]], "C\021\027\000\000\000\004\000\000\000" ; OBJ-LABEL: GlobalProcIdSym { @@ -136,7 +146,7 @@ ; ASM: .asciz "pad_right" # Function name ; ASM: .short 4414 # Record kind: S_LOCAL ; ASM: .asciz "o" -; ASM: .cv_def_range .Ltmp8 .Ltmp8, "C\021\021\000\000\000\004\000\000\000" +; ASM: .cv_def_range [[pad_right_tmp]] [[pad_right_tmp]], "C\021\021\000\000\000\004\000\000\000" ; OBJ-LABEL: GlobalProcIdSym { ; OBJ: Kind: S_GPROC32_ID (0x1147) @@ -159,7 +169,7 @@ ; ASM: .asciz "pad_left" # Function name ; ASM: .short 4414 # Record kind: S_LOCAL ; ASM: .asciz "o" -; ASM: .cv_def_range .Ltmp10 .Ltmp10, "C\021\021\000\000\000\000\000\000\000" +; ASM: .cv_def_range [[pad_left_tmp]] [[pad_left_tmp]], "C\021\021\000\000\000\000\000\000\000" ; OBJ-LABEL: GlobalProcIdSym { ; OBJ: Kind: S_GPROC32_ID (0x1147) Index: test/DebugInfo/MIR/AArch64/implicit-def-dead-scope.mir =================================================================== --- test/DebugInfo/MIR/AArch64/implicit-def-dead-scope.mir +++ test/DebugInfo/MIR/AArch64/implicit-def-dead-scope.mir @@ -5,8 +5,10 @@ # encountering an IMPLICIT_DEF in its own lexical scope. # CHECK: .debug_info contents: -# CHECK: DW_TAG_formal_parameter -# CHECK: DW_AT_const_value [DW_FORM_udata] (0) +# CHECK: DW_TAG_formal_parameter +# CHECK: DW_AT_location [DW_FORM_sec_offset] +# CHECK-NEXT: DW_OP_lit0, DW_OP_stack_value +# CHECK-NEXT: DW_AT_abstract_origin {{.*}} "name" --- | ; ModuleID = 't.ll' source_filename = "t.ll" @@ -103,7 +105,7 @@ !15 = distinct !DICompositeType(tag: DW_TAG_class_type, name: "v", file: !5, line: 97, size: 64, elements: !2, identifier: "_ZTS1v") !16 = !DISubroutineType(types: !2) !17 = !DISubprogram(name: "bv", linkageName: "_ZN1v2bvEv", scope: !15, file: !5, line: 98, type: !16, isLocal: false, isDefinition: false, scopeLine: 98, flags: DIFlagPrototyped, isOptimized: true) - !18 = !DILocalVariable(arg: 2, scope: !19, file: !5, line: 22, type: !21) + !18 = !DILocalVariable(name: "name", arg: 2, scope: !19, file: !5, line: 22, type: !21) !19 = distinct !DISubprogram(name: "m", linkageName: "_ZN1jILi6EN1a1fEE1mEj", scope: !11, file: !5, line: 22, type: !16, isLocal: false, isDefinition: true, scopeLine: 22, flags: DIFlagPrototyped, isOptimized: true, unit: !0, declaration: !20, retainedNodes: !2) !20 = !DISubprogram(name: "m", linkageName: "_ZN1jILi6EN1a1fEE1mEj", scope: !11, file: !5, line: 22, type: !16, isLocal: false, isDefinition: false, scopeLine: 22, flags: DIFlagPublic | DIFlagPrototyped, isOptimized: true) !21 = !DIDerivedType(tag: DW_TAG_typedef, name: "h", file: !5, line: 10, baseType: !22) Index: test/DebugInfo/X86/fission-ranges.ll =================================================================== --- test/DebugInfo/X86/fission-ranges.ll +++ test/DebugInfo/X86/fission-ranges.ll @@ -15,6 +15,7 @@ ; CHECK-NEXT: DW_AT_GNU_addr_base [DW_FORM_sec_offset] (0x00000000) ; CHECK: .debug_info.dwo contents: +; CHECK: DW_AT_location [DW_FORM_sec_offset] ([[P:0x[0-9a-z]*]] ; CHECK: DW_AT_location [DW_FORM_sec_offset] ([[A:0x[0-9a-z]*]] ; CHECK: DW_AT_location [DW_FORM_sec_offset] ([[E:0x[0-9a-z]*]] ; CHECK: DW_AT_location [DW_FORM_sec_offset] ([[B:0x[0-9a-z]*]] @@ -27,24 +28,31 @@ ; Don't assume these locations are entirely correct - feel free to update them ; if they've changed due to a bugfix, change in register allocation, etc. +; CHECK: [[P]]: +; CHECK-NEXT: Addr idx 1 (w/ length 204): DW_OP_consts +1, DW_OP_stack_value ; CHECK: [[A]]: ; CHECK-NEXT: Addr idx 2 (w/ length 169): DW_OP_consts +0, DW_OP_stack_value -; CHECK-NEXT: Addr idx 3 (w/ length 25): DW_OP_reg0 RAX +; CHECK-NEXT: Addr idx 3 (w/ length 15): DW_OP_reg0 RAX +; CHECK-NEXT: Addr idx 4 (w/ length 6): DW_OP_breg7 RSP-8 +; CHECK-NEXT: Addr idx 5 (w/ length 4): DW_OP_reg0 RAX ; CHECK: [[E]]: -; CHECK-NEXT: Addr idx 4 (w/ length 19): DW_OP_reg0 RAX +; CHECK-NEXT: Addr idx 6 (w/ length 9): DW_OP_reg0 RAX +; CHECK-NEXT: Addr idx 7 (w/ length 98): DW_OP_breg7 RSP-44 ; CHECK: [[B]]: -; CHECK-NEXT: Addr idx 5 (w/ length 17): DW_OP_reg0 RAX +; CHECK-NEXT: Addr idx 8 (w/ length 15): DW_OP_reg0 RAX +; CHECK-NEXT: Addr idx 9 (w/ length 66): DW_OP_breg7 RSP-32 ; CHECK: [[D]]: -; CHECK-NEXT: Addr idx 6 (w/ length 17): DW_OP_reg0 RAX +; CHECK-NEXT: Addr idx 10 (w/ length 15): DW_OP_reg0 RAX +; CHECK-NEXT: Addr idx 11 (w/ length 42): DW_OP_breg7 RSP-20 ; Make sure we don't produce any relocations in any .dwo section (though in particular, debug_info.dwo) ; HDR-NOT: .rela.{{.*}}.dwo ; Make sure we have enough stuff in the debug_addr to cover the address indexes -; (6 is the last index in debug_loc.dwo, making 7 entries of 8 bytes each, 7 * 8 -; == 56 base 10 == 38 base 16) +; (11 is the last index in debug_loc.dwo, making 12 entries of 8 bytes each, +; 12 * 8 == 96 base 10 == 60 base 16) -; HDR: .debug_addr 00000038 +; HDR: .debug_addr 00000060 ; HDR-NOT: .rela.{{.*}}.dwo ; Check for the existence of a DWARF v5-style range list table in the .debug_rnglists Index: test/DebugInfo/X86/live-debug-values-constprop.mir =================================================================== --- /dev/null +++ test/DebugInfo/X86/live-debug-values-constprop.mir @@ -0,0 +1,347 @@ +# RUN: llc %s -o - -run-pass=livedebugvalues -mtriple=x86_64-unknown-unknown | FileCheck %s --check-prefix=CHECK +# RUN: llc %s -o - -start-before=livedebugvalues -filetype=obj -mtriple=x86_64-unknown-unknown | llvm-dwarfdump - | FileCheck %s --check-prefix=RANGES +# Check that livedebugvalues does the right thing when register and constant +# DBG_VALUEs interact, and that their ranges are correctly terminated by the +# debug printing backend. +--- | + ; All these IR functions are duds, see the MIR below. + source_filename = "" + target datalayout = "e-m:e-i64:64-f80:128-n8:16:32:64-S128" + + define i32 @foo(i32* %bees, i32* %output) !dbg !4 { + entry: + br i1 undef, label %bb1, label %bb1 + bb1: + br label %bb3 + bb2: + br label %bb3 + bb3: + ret i32 0 + } + + define i32 @bar(i32* %bees, i32* %output) !dbg !40 { + entry: + br i1 undef, label %bb1, label %bb1 + bb1: + br label %bb3 + bb2: + br label %bb3 + bb3: + ret i32 0 + } + + define i32 @baz(i32* %bees, i32* %output) !dbg !80 { + entry: + br i1 undef, label %bb1, label %bb1 + bb1: + br label %bb3 + bb2: + br label %bb3 + bb3: + ret i32 0 + } + + define i32 @qux(i32* %bees, i32* %output) !dbg !120 { + entry: + br i1 undef, label %bb1, label %bb1 + bb1: + br label %bb3 + bb2: + br label %bb3 + bb3: + ret i32 0 + } + + ; Function Attrs: nounwind readnone speculatable + declare void @llvm.dbg.value(metadata, metadata, metadata) + + ; Function Attrs: nounwind readnone speculatable + declare void @llvm.dbg.declare(metadata, metadata, metadata) + + ; Function Attrs: nounwind + declare void @llvm.stackprotector(i8*, i8**) + + !llvm.module.flags = !{!0, !100} + !llvm.dbg.cu = !{!1} + + !100 = !{i32 2, !"Dwarf Version", i32 4} + !0 = !{i32 2, !"Debug Info Version", i32 3} + !1 = distinct !DICompileUnit(language: DW_LANG_C_plus_plus, file: !2, producer: "beards", isOptimized: true, runtimeVersion: 0, emissionKind: FullDebug) + !2 = !DIFile(filename: "bees.cpp", directory: ".") + !3 = !DILocalVariable(name: "flannel", scope: !4, file: !2, line: 1, type: !16) + !4 = distinct !DISubprogram(name: "nope", scope: !2, file: !2, line: 1, spFlags: DISPFlagDefinition, unit: !1, retainedNodes: !13, type: !14, isDefinition: true) + !5 = !DILocation(line: 0, scope: !4) + !6 = !DILocation(line: 1, scope: !4) + !7 = !DILocation(line: 2, scope: !4) + !8 = !DILocation(line: 4, scope: !4) + !9 = !DILocation(line: 5, scope: !4) + !10 = !DILocation(line: 6, scope: !4) + !11 = !DILocation(line: 7, scope: !4) + !12 = !DILocation(line: 8, scope: !4) + !13 = !{!3} + !14 = !DISubroutineType(types: !15) + !15 = !{!16} + !16 = !DIBasicType(name: "int", size: 32, align: 32, encoding: DW_ATE_signed) + !40 = distinct !DISubprogram(name: "bar", scope: !2, file: !2, line: 1, spFlags: DISPFlagDefinition, unit: !1, retainedNodes: !13, type: !14, isDefinition: true) + !41 = !DILocalVariable(name: "towel", scope: !40, file: !2, line: 1, type: !16) + !42 = !DILocation(line: 40, scope: !40) + !80 = distinct !DISubprogram(name: "baz", scope: !2, file: !2, line: 1, spFlags: DISPFlagDefinition, unit: !1, retainedNodes: !13, type: !14, isDefinition: true) + !81 = !DILocalVariable(name: "socks", scope: !80, file: !2, line: 1, type: !16) + !82 = !DILocation(line: 40, scope: !80) + !120 = distinct !DISubprogram(name: "qux", scope: !2, file: !2, line: 1, spFlags: DISPFlagDefinition, unit: !1, retainedNodes: !13, type: !14, isDefinition: true) + !121 = !DILocalVariable(name: "shoes", scope: !120, file: !2, line: 1, type: !16) + !122 = !DILocation(line: 40, scope: !120) + +... +--- +name: foo +alignment: 4 +tracksRegLiveness: true +registers: [] +liveins: + - { reg: '$rdi', virtual-reg: '' } +body: | + + ; Two DBG_VALUEs for eax merge into bb3, check that livedebugvalues propagates + ; the location. + ; CHECK-LABEL: name: foo + ; CHECK-LABEL: bb.1.bb1 + ; CHECK: $eax = MOV32rr + ; CHECK-NEXT: DBG_VALUE $eax + ; CHECK-NEXT: JMP_1 %bb.3 + ; CHECK-LABEL: bb.2.bb2 + ; CHECK: $eax = ADD32ri8 + ; CHECK-NEXT: DBG_VALUE $eax + ; CHECK-NEXT: JMP_1 %bb.3 + ; CHECK-LABEL: bb.3.bb3 + ; CHECK: DBG_VALUE $eax + ; Test for there being a location-list gap between bb1 and bb2, as the + ; variable does not have a location over the ADD32ri. The range should also + ; extend over the final bb. + ; RANGES-LABEL: DW_TAG_subprogram + ; RANGES: DW_AT_high_pc (0x[[NOPEHIGHPC:[0-9a-f]+]]) + ; RANGES-LABEL: DW_AT_name ("nope") + ; RANGES: DW_AT_location (0x{{[0-9a-f]+}} + ; RANGES-NEXT: [0x{{[0-9a-f]+}}, 0x[[NOPEADDR:[0-9a-f]+]]): DW_OP_reg0 RAX + ; RANGES-NEXT: [ + ; RANGES-NOT: 0x[[NOPEADDR]] + ; RANGES-SAME: , 0x[[NOPEHIGHPC]]): DW_OP_reg0 RAX + + bb.0.entry: + successors: %bb.1, %bb.2 + liveins: $rdi + + $ecx = XOR32rr undef $ecx, undef $ecx, implicit-def $eflags + JCC_1 %bb.1, 2, implicit killed $eflags + JMP_1 %bb.2 + + bb.1.bb1 (align 4): + successors: %bb.3 + liveins: $ecx, $rdi + + $eax = MOV32rr killed $ecx, implicit-def $rax + DBG_VALUE $eax, $noreg, !3, !DIExpression(), debug-location !8 + JMP_1 %bb.3 + + bb.2.bb2: + successors: %bb.3 + liveins: $rax + + $eax = ADD32ri8 $eax, 3, implicit-def dead $eflags, implicit killed $rax, implicit-def $rax + DBG_VALUE $eax, $noreg, !3, !DIExpression(), debug-location !8 + JMP_1 %bb.3 + + bb.3.bb3: + liveins: $rax + RETQ $eax, debug-location !9 + +... +--- +name: bar +alignment: 4 +tracksRegLiveness: true +registers: [] +liveins: + - { reg: '$rdi', virtual-reg: '' } +body: | + ; Two DBG_VALUEs, one for eax, the other for zero, merge into bb3. Check that + ; livedebugvalues does not propagate anything. + ; the location. + ; CHECK-LABEL: name: bar + ; CHECK-LABEL: bb.1.bb1 + ; CHECK: $eax = MOV32rr + ; CHECK-NEXT: DBG_VALUE 0 + ; CHECK-NEXT: JMP_1 %bb.3 + ; CHECK-LABEL: bb.2.bb2 + ; CHECK: $eax = ADD32ri8 + ; CHECK-NEXT: DBG_VALUE $eax + ; CHECK-NEXT: JMP_1 %bb.3 + ; CHECK-LABEL: bb.3.bb3 + ; CHECK-NOT: DBG_VALUE + ; Test for there being a location-list gap between bb1 and bb2, the variable + ; should not have a location over the ADD32ri. The range of the last entry + ; should not cover the last block. + ; RANGES-LABEL: DW_TAG_subprogram + ; RANGES: DW_AT_high_pc (0x[[BARHIGHPC:[0-9a-f]+]]) + ; RANGES-LABEL: DW_AT_name ("bar") + ; RANGES: DW_AT_location (0x{{[0-9a-f]+}} + ; RANGES-NEXT: [0x{{[0-9a-f]+}}, 0x[[BARADDR:[0-9a-f]+]]): DW_OP_consts +0, DW_OP_stack_value + ; RANGES-NEXT: [ + ; RANGES-NOT: 0x[[BARADDR]] + ; RANGES-NOT: 0x[[BARHIGHPC]] + ; RANGES-SAME: ): DW_OP_reg0 RAX + + bb.0.entry: + successors: %bb.1, %bb.2 + liveins: $rdi + + $ecx = XOR32rr undef $ecx, undef $ecx, implicit-def $eflags + JCC_1 %bb.1, 2, implicit killed $eflags + JMP_1 %bb.2 + + bb.1.bb1 (align 4): + successors: %bb.3 + liveins: $ecx, $rdi + + $eax = MOV32rr killed $ecx, implicit-def $rax + DBG_VALUE 0, $noreg, !41, !DIExpression(), debug-location !42 + JMP_1 %bb.3 + + bb.2.bb2: + successors: %bb.3 + liveins: $rax + + $eax = ADD32ri8 $eax, 3, implicit-def dead $eflags, implicit killed $rax, implicit-def $rax + DBG_VALUE $eax, $noreg, !41, !DIExpression(), debug-location !42 + JMP_1 %bb.3 + + bb.3.bb3: + liveins: $rax + RETQ $eax, debug-location !42 + +... +--- +name: baz +alignment: 4 +tracksRegLiveness: true +registers: [] +liveins: + - { reg: '$rdi', virtual-reg: '' } +body: | + ; Two DBG_VALUEs, one for zero, the other for eax, merge into bb3. Check that + ; livedebugvalues does not propagate anything. + ; the location. + ; CHECK-LABEL: name: baz + ; CHECK-LABEL: bb.1.bb1 + ; CHECK: $eax = MOV32rr + ; CHECK-NEXT: DBG_VALUE $eax + ; CHECK-NEXT: JMP_1 %bb.3 + ; CHECK-LABEL: bb.2.bb2 + ; CHECK: $eax = ADD32ri8 + ; CHECK-NEXT: DBG_VALUE 0 + ; CHECK-NEXT: JMP_1 %bb.3 + ; CHECK-LABEL: bb.3.bb3 + ; CHECK-NOT: DBG_VALUE + ; Test for there being a location-list gap between bb1 and bb2, the variable + ; should not have a location over the ADD32ri. The range of the last item + ; should not cover the last block. + ; RANGES-LABEL: DW_TAG_subprogram + ; RANGES: DW_AT_high_pc (0x[[BAZHIGHPC:[0-9a-f]+]]) + ; RANGES-LABEL: DW_AT_name ("baz") + ; RANGES: DW_AT_location (0x{{[0-9a-f]+}} + ; RANGES-NEXT: [0x{{[0-9a-f]+}}, 0x[[BAZADDR:[0-9a-f]+]]): DW_OP_reg0 RAX + ; RANGES-NEXT: [ + ; RANGES-NOT: 0x[[BAZADDR]] + ; RANGES-NOT: 0x[[BAZHIGHPC]] + ; RANGES-SAME: ): DW_OP_consts +0, DW_OP_stack_value + + bb.0.entry: + successors: %bb.1, %bb.2 + liveins: $rdi + + $ecx = XOR32rr undef $ecx, undef $ecx, implicit-def $eflags + JCC_1 %bb.1, 2, implicit killed $eflags + JMP_1 %bb.2 + + bb.1.bb1 (align 4): + successors: %bb.3 + liveins: $ecx, $rdi + + $eax = MOV32rr killed $ecx, implicit-def $rax + DBG_VALUE $eax, $noreg, !81, !DIExpression(), debug-location !82 + JMP_1 %bb.3 + + bb.2.bb2: + successors: %bb.3 + liveins: $rax + + $eax = ADD32ri8 $eax, 3, implicit-def dead $eflags, implicit killed $rax, implicit-def $rax + DBG_VALUE 0, $noreg, !81, !DIExpression(), debug-location !82 + JMP_1 %bb.3 + + bb.3.bb3: + liveins: $rax + RETQ $eax, debug-location !82 + +... +--- +name: qux +alignment: 4 +tracksRegLiveness: true +registers: [] +liveins: + - { reg: '$rdi', virtual-reg: '' } +body: | + ; Two DBG_VALUEs for zero merging into bb3, Check that livedebugvalues does + ; propagate the zero into the merging block. + ; CHECK-LABEL: name: qux + ; CHECK-LABEL: bb.1.bb1 + ; CHECK: $eax = MOV32rr + ; CHECK-NEXT: DBG_VALUE 0 + ; CHECK-NEXT: JMP_1 %bb.3 + ; CHECK-LABEL: bb.2.bb2 + ; CHECK: $eax = ADD32ri8 + ; CHECK-NEXT: DBG_VALUE 0 + ; CHECK-NEXT: JMP_1 %bb.3 + ; CHECK-LABEL: bb.3.bb3 + ; CHECK: DBG_VALUE 0 + ; Test for there being a location-list gap between bb1 and bb2, the variable + ; should not have a location over the ADD32ri. The final entry should cover + ; the final block. + ; RANGES-LABEL: DW_TAG_subprogram + ; RANGES: DW_AT_high_pc (0x[[QUXHIGHPC:[0-9a-f]+]]) + ; RANGES-LABEL: DW_AT_name ("qux") + ; RANGES: DW_AT_location (0x{{[0-9a-f]+}} + ; RANGES-NEXT: [0x{{[0-9a-f]+}}, 0x[[QUXADDR:[0-9a-f]+]]): DW_OP_consts +0, DW_OP_stack_value + ; RANGES-NOT: 0x[[QUXADDR]] + ; RANGES-NEXT: [0x{{[0-9a-f]+}}, 0x[[QUXHIGHPC]]): DW_OP_consts +0, DW_OP_stack_value + + bb.0.entry: + successors: %bb.1, %bb.2 + liveins: $rdi + + $ecx = XOR32rr undef $ecx, undef $ecx, implicit-def $eflags + JCC_1 %bb.1, 2, implicit killed $eflags + JMP_1 %bb.2 + + bb.1.bb1 (align 4): + successors: %bb.3 + liveins: $ecx, $rdi + + $eax = MOV32rr killed $ecx, implicit-def $rax + DBG_VALUE 0, $noreg, !121, !DIExpression(), debug-location !122 + JMP_1 %bb.3 + + bb.2.bb2: + successors: %bb.3 + liveins: $rax + + $eax = ADD32ri8 $eax, 3, implicit-def dead $eflags, implicit killed $rax, implicit-def $rax + DBG_VALUE 0, $noreg, !121, !DIExpression(), debug-location !122 + JMP_1 %bb.3 + + bb.3.bb3: + liveins: $rax + RETQ $eax, debug-location !122 + +...