Index: llvm/trunk/lib/Target/RISCV/AsmParser/RISCVAsmParser.cpp
===================================================================
--- llvm/trunk/lib/Target/RISCV/AsmParser/RISCVAsmParser.cpp
+++ llvm/trunk/lib/Target/RISCV/AsmParser/RISCVAsmParser.cpp
@@ -12,6 +12,7 @@
 #include "MCTargetDesc/RISCVMCTargetDesc.h"
 #include "MCTargetDesc/RISCVTargetStreamer.h"
 #include "Utils/RISCVBaseInfo.h"
+#include "Utils/RISCVMatInt.h"
 #include "llvm/ADT/STLExtras.h"
 #include "llvm/ADT/StringSwitch.h"
 #include "llvm/MC/MCAssembler.h"
@@ -1348,80 +1349,23 @@
 
 void RISCVAsmParser::emitLoadImm(unsigned DestReg, int64_t Value,
                                  MCStreamer &Out) {
-  if (isInt<32>(Value)) {
-    // Emits the MC instructions for loading a 32-bit constant into a register.
-    //
-    // Depending on the active bits in the immediate Value v, the following
-    // instruction sequences are emitted:
-    //
-    // v == 0                        : ADDI(W)
-    // v[0,12) != 0 && v[12,32) == 0 : ADDI(W)
-    // v[0,12) == 0 && v[12,32) != 0 : LUI
-    // v[0,32) != 0                  : LUI+ADDI(W)
-    //
-    int64_t Hi20 = ((Value + 0x800) >> 12) & 0xFFFFF;
-    int64_t Lo12 = SignExtend64<12>(Value);
-    unsigned SrcReg = RISCV::X0;
-
-    if (Hi20) {
-      emitToStreamer(Out,
-                     MCInstBuilder(RISCV::LUI).addReg(DestReg).addImm(Hi20));
-      SrcReg = DestReg;
-    }
+  RISCVMatInt::InstSeq Seq;
+  RISCVMatInt::generateInstSeq(Value, isRV64(), Seq);
 
-    if (Lo12 || Hi20 == 0) {
-      unsigned AddiOpcode =
-          STI->hasFeature(RISCV::Feature64Bit) ? RISCV::ADDIW : RISCV::ADDI;
-      emitToStreamer(Out, MCInstBuilder(AddiOpcode)
-                              .addReg(DestReg)
-                              .addReg(SrcReg)
-                              .addImm(Lo12));
+  unsigned SrcReg = RISCV::X0;
+  for (RISCVMatInt::Inst &Inst : Seq) {
+    if (Inst.Opc == RISCV::LUI) {
+      emitToStreamer(
+          Out, MCInstBuilder(RISCV::LUI).addReg(DestReg).addImm(Inst.Imm));
+    } else {
+      emitToStreamer(
+          Out, MCInstBuilder(Inst.Opc).addReg(DestReg).addReg(SrcReg).addImm(
+                   Inst.Imm));
     }
-    return;
-  }
-  assert(STI->hasFeature(RISCV::Feature64Bit) &&
-         "Target must be 64-bit to support a >32-bit constant");
 
-  // In the worst case, for a full 64-bit constant, a sequence of 8 instructions
-  // (i.e., LUI+ADDIW+SLLI+ADDI+SLLI+ADDI+SLLI+ADDI) has to be emmitted. Note
-  // that the first two instructions (LUI+ADDIW) can contribute up to 32 bits
-  // while the following ADDI instructions contribute up to 12 bits each.
-  //
-  // On the first glance, implementing this seems to be possible by simply
-  // emitting the most significant 32 bits (LUI+ADDIW) followed by as many left
-  // shift (SLLI) and immediate additions (ADDI) as needed. However, due to the
-  // fact that ADDI performs a sign extended addition, doing it like that would
-  // only be possible when at most 11 bits of the ADDI instructions are used.
-  // Using all 12 bits of the ADDI instructions, like done by GAS, actually
-  // requires that the constant is processed starting with the least significant
-  // bit.
-  //
-  // In the following, constants are processed from LSB to MSB but instruction
-  // emission is performed from MSB to LSB by recursively calling
-  // emitLoadImm. In each recursion, first the lowest 12 bits are removed
-  // from the constant and the optimal shift amount, which can be greater than
-  // 12 bits if the constant is sparse, is determined. Then, the shifted
-  // remaining constant is processed recursively and gets emitted as soon as it
-  // fits into 32 bits. The emission of the shifts and additions is subsequently
-  // performed when the recursion returns.
-  //
-  int64_t Lo12 = SignExtend64<12>(Value);
-  int64_t Hi52 = (Value + 0x800) >> 12;
-  int ShiftAmount = 12 + findFirstSet((uint64_t)Hi52);
-  Hi52 = SignExtend64(Hi52 >> (ShiftAmount - 12), 64 - ShiftAmount);
-
-  emitLoadImm(DestReg, Hi52, Out);
-
-  emitToStreamer(Out, MCInstBuilder(RISCV::SLLI)
-                          .addReg(DestReg)
-                          .addReg(DestReg)
-                          .addImm(ShiftAmount));
-
-  if (Lo12)
-    emitToStreamer(Out, MCInstBuilder(RISCV::ADDI)
-                            .addReg(DestReg)
-                            .addReg(DestReg)
-                            .addImm(Lo12));
+    // Only the first instruction has X0 as its source.
+    SrcReg = DestReg;
+  }
 }
 
 void RISCVAsmParser::emitLoadLocalAddress(MCInst &Inst, SMLoc IDLoc,
Index: llvm/trunk/lib/Target/RISCV/Utils/CMakeLists.txt
===================================================================
--- llvm/trunk/lib/Target/RISCV/Utils/CMakeLists.txt
+++ llvm/trunk/lib/Target/RISCV/Utils/CMakeLists.txt
@@ -1,3 +1,4 @@
 add_llvm_library(LLVMRISCVUtils
   RISCVBaseInfo.cpp
+  RISCVMatInt.cpp
   )
Index: llvm/trunk/lib/Target/RISCV/Utils/RISCVMatInt.h
===================================================================
--- llvm/trunk/lib/Target/RISCV/Utils/RISCVMatInt.h
+++ llvm/trunk/lib/Target/RISCV/Utils/RISCVMatInt.h
@@ -0,0 +1,36 @@
+//===- RISCVMatInt.h - Immediate materialisation ---------------*- C++ -*--===//
+//
+//                     The LLVM Compiler Infrastructure
+//
+// This file is distributed under the University of Illinois Open Source
+// License. See LICENSE.TXT for details.
+//
+//===----------------------------------------------------------------------===//
+
+#ifndef LLVM_LIB_TARGET_RISCV_MATINT_H
+#define LLVM_LIB_TARGET_RISCV_MATINT_H
+
+#include "llvm/ADT/SmallVector.h"
+#include "llvm/Support/MachineValueType.h"
+#include <cstdint>
+
+namespace llvm {
+
+namespace RISCVMatInt {
+struct Inst {
+  unsigned Opc;
+  int64_t Imm;
+
+  Inst(unsigned Opc, int64_t Imm) : Opc(Opc), Imm(Imm) {}
+};
+using InstSeq = SmallVector<Inst, 8>;
+
+// Helper to generate an instruction sequence that will materialise the given
+// immediate value into a register. A sequence of instructions represented by
+// a simple struct produced rather than directly emitting the instructions in
+// order to allow this helper to be used from both the MC layer and during
+// instruction selection.
+void generateInstSeq(int64_t Val, bool IsRV64, InstSeq &Res);
+} // namespace RISCVMatInt
+} // namespace llvm
+#endif
Index: llvm/trunk/lib/Target/RISCV/Utils/RISCVMatInt.cpp
===================================================================
--- llvm/trunk/lib/Target/RISCV/Utils/RISCVMatInt.cpp
+++ llvm/trunk/lib/Target/RISCV/Utils/RISCVMatInt.cpp
@@ -0,0 +1,79 @@
+//===- RISCVMatInt.cpp - Immediate materialisation -------------*- C++ -*--===//
+//
+//                     The LLVM Compiler Infrastructure
+//
+// This file is distributed under the University of Illinois Open Source
+// License. See LICENSE.TXT for details.
+//
+//===----------------------------------------------------------------------===//
+
+#include "RISCVMatInt.h"
+#include "MCTargetDesc/RISCVMCTargetDesc.h"
+#include "llvm/ADT/SmallVector.h"
+#include "llvm/Support/MachineValueType.h"
+#include "llvm/Support/MathExtras.h"
+#include <cstdint>
+
+namespace llvm {
+
+namespace RISCVMatInt {
+void generateInstSeq(int64_t Val, bool Is64Bit, InstSeq &Res) {
+  if (isInt<32>(Val)) {
+    // Depending on the active bits in the immediate Value v, the following
+    // instruction sequences are emitted:
+    //
+    // v == 0                        : ADDI
+    // v[0,12) != 0 && v[12,32) == 0 : ADDI
+    // v[0,12) == 0 && v[12,32) != 0 : LUI
+    // v[0,32) != 0                  : LUI+ADDI(W)
+    int64_t Hi20 = ((Val + 0x800) >> 12) & 0xFFFFF;
+    int64_t Lo12 = SignExtend64<12>(Val);
+
+    if (Hi20)
+      Res.push_back(Inst(RISCV::LUI, Hi20));
+
+    if (Lo12 || Hi20 == 0) {
+      unsigned AddiOpc = (Is64Bit && Hi20) ? RISCV::ADDIW : RISCV::ADDI;
+      Res.push_back(Inst(AddiOpc, Lo12));
+    }
+    return;
+  }
+
+  assert(Is64Bit && "Can't emit >32-bit imm for non-RV64 target");
+
+  // In the worst case, for a full 64-bit constant, a sequence of 8 instructions
+  // (i.e., LUI+ADDIW+SLLI+ADDI+SLLI+ADDI+SLLI+ADDI) has to be emmitted. Note
+  // that the first two instructions (LUI+ADDIW) can contribute up to 32 bits
+  // while the following ADDI instructions contribute up to 12 bits each.
+  //
+  // On the first glance, implementing this seems to be possible by simply
+  // emitting the most significant 32 bits (LUI+ADDIW) followed by as many left
+  // shift (SLLI) and immediate additions (ADDI) as needed. However, due to the
+  // fact that ADDI performs a sign extended addition, doing it like that would
+  // only be possible when at most 11 bits of the ADDI instructions are used.
+  // Using all 12 bits of the ADDI instructions, like done by GAS, actually
+  // requires that the constant is processed starting with the least significant
+  // bit.
+  //
+  // In the following, constants are processed from LSB to MSB but instruction
+  // emission is performed from MSB to LSB by recursively calling
+  // generateInstSeq. In each recursion, first the lowest 12 bits are removed
+  // from the constant and the optimal shift amount, which can be greater than
+  // 12 bits if the constant is sparse, is determined. Then, the shifted
+  // remaining constant is processed recursively and gets emitted as soon as it
+  // fits into 32 bits. The emission of the shifts and additions is subsequently
+  // performed when the recursion returns.
+
+  int64_t Lo12 = SignExtend64<12>(Val);
+  int64_t Hi52 = (Val + 0x800) >> 12;
+  int ShiftAmount = 12 + findFirstSet((uint64_t)Hi52);
+  Hi52 = SignExtend64(Hi52 >> (ShiftAmount - 12), 64 - ShiftAmount);
+
+  generateInstSeq(Hi52, Is64Bit, Res);
+
+  Res.push_back(Inst(RISCV::SLLI, ShiftAmount));
+  if (Lo12)
+    Res.push_back(Inst(RISCV::ADDI, Lo12));
+}
+} // namespace RISCVMatInt
+} // namespace llvm
Index: llvm/trunk/test/MC/RISCV/rv64c-aliases-valid.s
===================================================================
--- llvm/trunk/test/MC/RISCV/rv64c-aliases-valid.s
+++ llvm/trunk/test/MC/RISCV/rv64c-aliases-valid.s
@@ -14,14 +14,14 @@
 li x10, 1
 # CHECK-EXPAND: c.li a0, -1
 li x10, -1
-# CHECK-EXPAND: addiw a0, zero, 2047
+# CHECK-EXPAND: addi a0, zero, 2047
 li x10, 2047
-# CHECK-EXPAND: addiw a0, zero, -2047
+# CHECK-EXPAND: addi a0, zero, -2047
 li x10, -2047
 # CHECK-EXPAND: c.lui a1, 1
 # CHECK-EXPAND: addiw a1, a1, -2048
 li x11, 2048
-# CHECK-EXPAND: addiw a1, zero, -2048
+# CHECK-EXPAND: addi a1, zero, -2048
 li x11, -2048
 # CHECK-EXPAND: c.lui a1, 1
 # CHECK-EXPAND: addiw a1, a1, -2047
Index: llvm/trunk/test/MC/RISCV/rv64i-aliases-valid.s
===================================================================
--- llvm/trunk/test/MC/RISCV/rv64i-aliases-valid.s
+++ llvm/trunk/test/MC/RISCV/rv64i-aliases-valid.s
@@ -17,21 +17,21 @@
 # TODO ld
 # TODO sd
 
-# CHECK-INST: addiw a0, zero, 0
-# CHECK-ALIAS: sext.w a0, zero
+# CHECK-INST: addi a0, zero, 0
+# CHECK-ALIAS: mv a0, zero
 li x10, 0
-# CHECK-EXPAND: addiw a0, zero, 1
+# CHECK-EXPAND: addi a0, zero, 1
 li x10, 1
-# CHECK-EXPAND: addiw a0, zero, -1
+# CHECK-EXPAND: addi a0, zero, -1
 li x10, -1
-# CHECK-EXPAND: addiw a0, zero, 2047
+# CHECK-EXPAND: addi a0, zero, 2047
 li x10, 2047
-# CHECK-EXPAND: addiw a0, zero, -2047
+# CHECK-EXPAND: addi a0, zero, -2047
 li x10, -2047
 # CHECK-EXPAND: lui a1, 1
 # CHECK-EXPAND: addiw a1, a1, -2048
 li x11, 2048
-# CHECK-EXPAND: addiw a1, zero, -2048
+# CHECK-EXPAND: addi a1, zero, -2048
 li x11, -2048
 # CHECK-EXPAND: lui a1, 1
 # CHECK-EXPAND: addiw a1, a1, -2047
@@ -66,28 +66,28 @@
 # CHECK-EXPAND: lui a2, 524288
 li x12, -0x80000000
 
-# CHECK-EXPAND: addiw a2, zero, 1
+# CHECK-EXPAND: addi a2, zero, 1
 # CHECK-EXPAND: slli a2, a2, 31
 li x12, 0x80000000
-# CHECK-EXPAND: addiw a2, zero, 1
+# CHECK-EXPAND: addi a2, zero, 1
 # CHECK-EXPAND: slli a2, a2, 32
 # CHECK-EXPAND: addi a2, a2, -1
 li x12, 0xFFFFFFFF
 
-# CHECK-EXPAND: addiw t0, zero, 1
+# CHECK-EXPAND: addi t0, zero, 1
 # CHECK-EXPAND: slli t0, t0, 32
 li t0, 0x100000000
-# CHECK-EXPAND: addiw t1, zero, -1
+# CHECK-EXPAND: addi t1, zero, -1
 # CHECK-EXPAND: slli t1, t1, 63
 li t1, 0x8000000000000000
-# CHECK-EXPAND: addiw t1, zero, -1
+# CHECK-EXPAND: addi t1, zero, -1
 # CHECK-EXPAND: slli t1, t1, 63
 li t1, -0x8000000000000000
 # CHECK-EXPAND: lui t2, 9321
 # CHECK-EXPAND: addiw t2, t2, -1329
 # CHECK-EXPAND: slli t2, t2, 35
 li t2, 0x1234567800000000
-# CHECK-EXPAND: addiw t3, zero, 7
+# CHECK-EXPAND: addi t3, zero, 7
 # CHECK-EXPAND: slli t3, t3, 36
 # CHECK-EXPAND: addi t3, t3, 11
 # CHECK-EXPAND: slli t3, t3, 24
@@ -102,7 +102,7 @@
 # CHECK-EXPAND: slli t4, t4, 13
 # CHECK-EXPAND: addi t4, t4, -272
 li t4, 0x123456789abcdef0
-# CHECK-EXPAND: addiw t5, zero, -1
+# CHECK-EXPAND: addi t5, zero, -1
 li t5, 0xFFFFFFFFFFFFFFFF
 
 # CHECK-INST: subw t6, zero, ra