Index: include/llvm/Analysis/TargetTransformInfo.h
===================================================================
--- include/llvm/Analysis/TargetTransformInfo.h
+++ include/llvm/Analysis/TargetTransformInfo.h
@@ -346,10 +346,10 @@
   /// \return The width of the largest scalar or vector register type.
   virtual unsigned getRegisterBitWidth(bool Vector) const;
 
-  /// \return The maximum unroll factor that the vectorizer should try to
+  /// \return The maximum interleave factor that any transform should try to
   /// perform for this target. This number depends on the level of parallelism
   /// and the number of execution units in the CPU.
-  virtual unsigned getMaximumUnrollFactor() const;
+  virtual unsigned getMaxInterleaveFactor() const;
 
   /// \return The expected cost of arithmetic ops, such as mul, xor, fsub, etc.
   virtual unsigned
Index: lib/Analysis/TargetTransformInfo.cpp
===================================================================
--- lib/Analysis/TargetTransformInfo.cpp
+++ lib/Analysis/TargetTransformInfo.cpp
@@ -167,8 +167,8 @@
   return PrevTTI->getRegisterBitWidth(Vector);
 }
 
-unsigned TargetTransformInfo::getMaximumUnrollFactor() const {
-  return PrevTTI->getMaximumUnrollFactor();
+unsigned TargetTransformInfo::getMaxInterleaveFactor() const {
+  return PrevTTI->getMaxInterleaveFactor();
 }
 
 unsigned TargetTransformInfo::getArithmeticInstrCost(
@@ -565,7 +565,7 @@
     return 32;
   }
 
-  unsigned getMaximumUnrollFactor() const override {
+  unsigned getMaxInterleaveFactor() const override {
     return 1;
   }
 
Index: lib/CodeGen/BasicTargetTransformInfo.cpp
===================================================================
--- lib/CodeGen/BasicTargetTransformInfo.cpp
+++ lib/CodeGen/BasicTargetTransformInfo.cpp
@@ -101,7 +101,7 @@
   /// @{
 
   unsigned getNumberOfRegisters(bool Vector) const override;
-  unsigned getMaximumUnrollFactor() const override;
+  unsigned getMaxInterleaveFactor() const override;
   unsigned getRegisterBitWidth(bool Vector) const override;
   unsigned getArithmeticInstrCost(unsigned Opcode, Type *Ty, OperandValueKind,
                                   OperandValueKind, OperandValueProperties,
@@ -284,7 +284,7 @@
   return 32;
 }
 
-unsigned BasicTTI::getMaximumUnrollFactor() const {
+unsigned BasicTTI::getMaxInterleaveFactor() const {
   return 1;
 }
 
Index: lib/Target/AArch64/AArch64TargetTransformInfo.cpp
===================================================================
--- lib/Target/AArch64/AArch64TargetTransformInfo.cpp
+++ lib/Target/AArch64/AArch64TargetTransformInfo.cpp
@@ -104,7 +104,7 @@
     return 64;
   }
 
-  unsigned getMaximumUnrollFactor() const override;
+  unsigned getMaxInterleaveFactor() const override;
 
   unsigned getCastInstrCost(unsigned Opcode, Type *Dst, Type *Src) const
       override;
@@ -516,7 +516,7 @@
   return Cost;
 }
 
-unsigned AArch64TTI::getMaximumUnrollFactor() const {
+unsigned AArch64TTI::getMaxInterleaveFactor() const {
   if (ST->isCortexA57() || ST->isCyclone())
     return 4;
   return 2;
Index: lib/Target/ARM/ARMTargetTransformInfo.cpp
===================================================================
--- lib/Target/ARM/ARMTargetTransformInfo.cpp
+++ lib/Target/ARM/ARMTargetTransformInfo.cpp
@@ -104,7 +104,7 @@
     return 32;
   }
 
-  unsigned getMaximumUnrollFactor() const override {
+  unsigned getMaxInterleaveFactor() const override {
     // These are out of order CPUs:
     if (ST->isCortexA15() || ST->isSwift())
       return 2;
Index: lib/Target/PowerPC/PPCTargetTransformInfo.cpp
===================================================================
--- lib/Target/PowerPC/PPCTargetTransformInfo.cpp
+++ lib/Target/PowerPC/PPCTargetTransformInfo.cpp
@@ -90,7 +90,7 @@
 
   unsigned getNumberOfRegisters(bool Vector) const override;
   unsigned getRegisterBitWidth(bool Vector) const override;
-  unsigned getMaximumUnrollFactor() const override;
+  unsigned getMaxInterleaveFactor() const override;
   unsigned getArithmeticInstrCost(unsigned Opcode, Type *Ty, OperandValueKind,
                                   OperandValueKind, OperandValueProperties,
                                   OperandValueProperties) const override;
@@ -295,7 +295,7 @@
 
 }
 
-unsigned PPCTTI::getMaximumUnrollFactor() const {
+unsigned PPCTTI::getMaxInterleaveFactor() const {
   unsigned Directive = ST->getDarwinDirective();
   // The 440 has no SIMD support, but floating-point instructions
   // have a 5-cycle latency, so unroll by 5x for latency hiding.
Index: lib/Target/R600/AMDGPUTargetTransformInfo.cpp
===================================================================
--- lib/Target/R600/AMDGPUTargetTransformInfo.cpp
+++ lib/Target/R600/AMDGPUTargetTransformInfo.cpp
@@ -81,7 +81,7 @@
 
   unsigned getNumberOfRegisters(bool Vector) const override;
   unsigned getRegisterBitWidth(bool Vector) const override;
-  unsigned getMaximumUnrollFactor() const override;
+  unsigned getMaxInterleaveFactor() const override;
 
   /// @}
 };
@@ -153,7 +153,7 @@
   return 32;
 }
 
-unsigned AMDGPUTTI::getMaximumUnrollFactor() const {
+unsigned AMDGPUTTI::getMaxInterleaveFactor() const {
   // Semi-arbitrary large amount.
   return 64;
 }
Index: lib/Target/X86/X86TargetTransformInfo.cpp
===================================================================
--- lib/Target/X86/X86TargetTransformInfo.cpp
+++ lib/Target/X86/X86TargetTransformInfo.cpp
@@ -82,7 +82,7 @@
 
   unsigned getNumberOfRegisters(bool Vector) const override;
   unsigned getRegisterBitWidth(bool Vector) const override;
-  unsigned getMaximumUnrollFactor() const override;
+  unsigned getMaxInterleaveFactor() const override;
   unsigned getArithmeticInstrCost(unsigned Opcode, Type *Ty, OperandValueKind,
                                   OperandValueKind, OperandValueProperties,
                                   OperandValueProperties) const override;
@@ -167,7 +167,7 @@
 
 }
 
-unsigned X86TTI::getMaximumUnrollFactor() const {
+unsigned X86TTI::getMaxInterleaveFactor() const {
   if (ST->isAtom())
     return 1;
 
Index: lib/Transforms/Vectorize/LoopVectorize.cpp
===================================================================
--- lib/Transforms/Vectorize/LoopVectorize.cpp
+++ lib/Transforms/Vectorize/LoopVectorize.cpp
@@ -108,8 +108,8 @@
                     cl::desc("Sets the SIMD width. Zero is autoselect."));
 
 static cl::opt<unsigned>
-VectorizationUnroll("force-vector-unroll", cl::init(0), cl::Hidden,
-                    cl::desc("Sets the vectorization unroll count. "
+VectorizationInterleave("force-vector-interleave", cl::init(0), cl::Hidden,
+                    cl::desc("Sets the vectorization interleave count. "
                              "Zero is autoselect."));
 
 static cl::opt<bool>
@@ -157,17 +157,17 @@
     "force-target-num-vector-regs", cl::init(0), cl::Hidden,
     cl::desc("A flag that overrides the target's number of vector registers."));
 
-/// Maximum vectorization unroll count.
-static const unsigned MaxUnrollFactor = 16;
+/// Maximum vectorization interleave count.
+static const unsigned MaxInterleaveFactor = 16;
 
-static cl::opt<unsigned> ForceTargetMaxScalarUnrollFactor(
-    "force-target-max-scalar-unroll", cl::init(0), cl::Hidden,
-    cl::desc("A flag that overrides the target's max unroll factor for scalar "
-             "loops."));
-
-static cl::opt<unsigned> ForceTargetMaxVectorUnrollFactor(
-    "force-target-max-vector-unroll", cl::init(0), cl::Hidden,
-    cl::desc("A flag that overrides the target's max unroll factor for "
+static cl::opt<unsigned> ForceTargetMaxScalarInterleaveFactor(
+    "force-target-max-scalar-interleave", cl::init(0), cl::Hidden,
+    cl::desc("A flag that overrides the target's max interleave factor for "
+             "scalar loops."));
+
+static cl::opt<unsigned> ForceTargetMaxVectorInterleaveFactor(
+    "force-target-max-vector-interleave", cl::init(0), cl::Hidden,
+    cl::desc("A flag that overrides the target's max interleave factor for "
              "vectorized loops."));
 
 static cl::opt<unsigned> ForceTargetInstructionCost(
@@ -1003,7 +1003,7 @@
       case HK_WIDTH:
         return isPowerOf2_32(Val) && Val <= MaxVectorWidth;
       case HK_UNROLL:
-        return isPowerOf2_32(Val) && Val <= MaxUnrollFactor;
+        return isPowerOf2_32(Val) && Val <= MaxInterleaveFactor;
       case HK_FORCE:
         return (Val <= 1);
       }
@@ -1013,8 +1013,8 @@
 
   /// Vectorization width.
   Hint Width;
-  /// Vectorization unroll factor.
-  Hint Unroll;
+  /// Vectorization interleave factor.
+  Hint Interleave;
   /// Vectorization forced
   Hint Force;
   /// Array to help iterating through all hints.
@@ -1030,36 +1030,36 @@
     FK_Enabled = 1,    ///< Forcing enabled.
   };
 
-  LoopVectorizeHints(const Loop *L, bool DisableUnrolling)
+  LoopVectorizeHints(const Loop *L, bool DisableInterleaving)
       : Width("vectorize.width", VectorizationFactor, HK_WIDTH),
-        Unroll("interleave.count", DisableUnrolling, HK_UNROLL),
+        Interleave("interleave.count", DisableInterleaving, HK_UNROLL),
         Force("vectorize.enable", FK_Undefined, HK_FORCE),
         TheLoop(L) {
     // FIXME: Move this up initialisation when MSVC requirement is 2013+
     Hints[0] = &Width;
-    Hints[1] = &Unroll;
+    Hints[1] = &Interleave;
     Hints[2] = &Force;
 
     // Populate values with existing loop metadata.
     getHintsFromMetadata();
 
-    // force-vector-unroll overrides DisableUnrolling.
-    if (VectorizationUnroll.getNumOccurrences() > 0)
-      Unroll.Value = VectorizationUnroll;
+    // force-vector-interleave overrides DisableInterleaving.
+    if (VectorizationInterleave.getNumOccurrences() > 0)
+      Interleave.Value = VectorizationInterleave;
 
-    DEBUG(if (DisableUnrolling && Unroll.Value == 1) dbgs()
-          << "LV: Unrolling disabled by the pass manager\n");
+    DEBUG(if (DisableInterleaving && Interleave.Value == 1) dbgs()
+          << "LV: Interleaving disabled by the pass manager\n");
   }
 
   /// Mark the loop L as already vectorized by setting the width to 1.
   void setAlreadyVectorized() {
-    Width.Value = Unroll.Value = 1;
+    Width.Value = Interleave.Value = 1;
     // FIXME: Change all lines below for this when we can use MSVC 2013+
     //writeHintsToMetadata({ Width, Unroll });
     std::vector<Hint> hints;
     hints.reserve(2);
     hints.emplace_back(Width);
-    hints.emplace_back(Unroll);
+    hints.emplace_back(Interleave);
     writeHintsToMetadata(std::move(hints));
   }
 
@@ -1074,8 +1074,8 @@
         R << " (Force=true";
         if (Width.Value != 0)
           R << ", Vector Width=" << Width.Value;
-        if (Unroll.Value != 0)
-          R << ", Interleave Count=" << Unroll.Value;
+        if (Interleave.Value != 0)
+          R << ", Interleave Count=" << Interleave.Value;
         R << ")";
       }
     }
@@ -1084,7 +1084,7 @@
   }
 
   unsigned getWidth() const { return Width.Value; }
-  unsigned getUnroll() const { return Unroll.Value; }
+  unsigned getInterleave() const { return Interleave.Value; }
   enum ForceKind getForce() const { return (ForceKind)Force.Value; }
 
 private:
@@ -1216,7 +1216,7 @@
       emitLoopVectorizeWarning(
           F->getContext(), *F, L->getStartLoc(),
           "failed explicitly specified loop vectorization");
-    else if (LH.getUnroll() != 1)
+    else if (LH.getInterleave() != 1)
       emitLoopInterleaveWarning(
           F->getContext(), *F, L->getStartLoc(),
           "failed explicitly specified loop interleaving");
@@ -1322,7 +1322,7 @@
                          : (Hints.getForce() == LoopVectorizeHints::FK_Enabled
                                 ? "enabled"
                                 : "?")) << " width=" << Hints.getWidth()
-                 << " unroll=" << Hints.getUnroll() << "\n");
+                 << " unroll=" << Hints.getInterleave() << "\n");
 
     // Function containing loop
     Function *F = L->getHeader()->getParent();
@@ -1349,7 +1349,7 @@
       return false;
     }
 
-    if (Hints.getWidth() == 1 && Hints.getUnroll() == 1) {
+    if (Hints.getWidth() == 1 && Hints.getInterleave() == 1) {
       DEBUG(dbgs() << "LV: Not vectorizing: Disabled/already vectorized.\n");
       emitOptimizationRemarkAnalysis(
           F->getContext(), DEBUG_TYPE, *F, L->getStartLoc(),
@@ -4628,7 +4628,7 @@
 
   // Bail out early if passed-in parameters make vectorization not feasible.
   unsigned ForcedFactor = VectorizationFactor ? VectorizationFactor : 1;
-  unsigned ForcedUnroll = VectorizationUnroll ? VectorizationUnroll : 1;
+  unsigned ForcedUnroll = VectorizationInterleave ? VectorizationInterleave : 1;
 
   // The distance must be bigger than the size needed for a vectorized version
   // of the operation and the size of the vectorized operation must not be
@@ -5505,7 +5505,7 @@
   // to the increased register pressure.
 
   // Use the user preference, unless 'auto' is selected.
-  int UserUF = Hints->getUnroll();
+  int UserUF = Hints->getInterleave();
   if (UserUF != 0)
     return UserUF;
 
@@ -5558,15 +5558,15 @@
                        std::max(1U, (R.MaxLocalUsers - 1)));
 
   // Clamp the unroll factor ranges to reasonable factors.
-  unsigned MaxUnrollSize = TTI.getMaximumUnrollFactor();
+  unsigned MaxInterleaveSize = TTI.getMaxInterleaveFactor();
 
   // Check if the user has overridden the unroll max.
   if (VF == 1) {
-    if (ForceTargetMaxScalarUnrollFactor.getNumOccurrences() > 0)
-      MaxUnrollSize = ForceTargetMaxScalarUnrollFactor;
+    if (ForceTargetMaxScalarInterleaveFactor.getNumOccurrences() > 0)
+      MaxInterleaveSize = ForceTargetMaxScalarInterleaveFactor;
   } else {
-    if (ForceTargetMaxVectorUnrollFactor.getNumOccurrences() > 0)
-      MaxUnrollSize = ForceTargetMaxVectorUnrollFactor;
+    if (ForceTargetMaxVectorInterleaveFactor.getNumOccurrences() > 0)
+      MaxInterleaveSize = ForceTargetMaxVectorInterleaveFactor;
   }
 
   // If we did not calculate the cost for VF (because the user selected the VF)
@@ -5576,8 +5576,8 @@
 
   // Clamp the calculated UF to be between the 1 and the max unroll factor
   // that the target allows.
-  if (UF > MaxUnrollSize)
-    UF = MaxUnrollSize;
+  if (UF > MaxInterleaveSize)
+    UF = MaxInterleaveSize;
   else if (UF < 1)
     UF = 1;
 
Index: test/Transforms/LoopVectorize/12-12-11-if-conv.ll
===================================================================
--- test/Transforms/LoopVectorize/12-12-11-if-conv.ll
+++ test/Transforms/LoopVectorize/12-12-11-if-conv.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -enable-if-conversion -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -enable-if-conversion -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/2012-10-20-infloop.ll
===================================================================
--- test/Transforms/LoopVectorize/2012-10-20-infloop.ll
+++ test/Transforms/LoopVectorize/2012-10-20-infloop.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce
 
 ; Check that we don't fall into an infinite loop.
 define void @test() nounwind {
Index: test/Transforms/LoopVectorize/2012-10-22-isconsec.ll
===================================================================
--- test/Transforms/LoopVectorize/2012-10-22-isconsec.ll
+++ test/Transforms/LoopVectorize/2012-10-22-isconsec.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -dce -force-vector-unroll=1 -force-vector-width=4 
+; RUN: opt < %s  -loop-vectorize -dce -force-vector-interleave=1 -force-vector-width=4 
 
 ; Check that we don't crash.
 
Index: test/Transforms/LoopVectorize/X86/gcc-examples.ll
===================================================================
--- test/Transforms/LoopVectorize/X86/gcc-examples.ll
+++ test/Transforms/LoopVectorize/X86/gcc-examples.ll
@@ -1,5 +1,5 @@
 ; RUN: opt < %s  -loop-vectorize -mtriple=x86_64-apple-macosx10.8.0 -mcpu=corei7 -dce -instcombine -S | FileCheck %s
-; RUN: opt < %s  -loop-vectorize -mtriple=x86_64-apple-macosx10.8.0 -mcpu=corei7 -force-vector-unroll=0 -dce -instcombine -S | FileCheck %s -check-prefix=UNROLL
+; RUN: opt < %s  -loop-vectorize -mtriple=x86_64-apple-macosx10.8.0 -mcpu=corei7 -force-vector-interleave=0 -dce -instcombine -S | FileCheck %s -check-prefix=UNROLL
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/X86/illegal-parallel-loop-uniform-write.ll
===================================================================
--- test/Transforms/LoopVectorize/X86/illegal-parallel-loop-uniform-write.ll
+++ test/Transforms/LoopVectorize/X86/illegal-parallel-loop-uniform-write.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-unknown-linux-gnu"
Index: test/Transforms/LoopVectorize/X86/min-trip-count-switch.ll
===================================================================
--- test/Transforms/LoopVectorize/X86/min-trip-count-switch.ll
+++ test/Transforms/LoopVectorize/X86/min-trip-count-switch.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -vectorizer-min-trip-count=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -vectorizer-min-trip-count=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-unknown-linux-gnu"
Index: test/Transforms/LoopVectorize/X86/parallel-loops-after-reg2mem.ll
===================================================================
--- test/Transforms/LoopVectorize/X86/parallel-loops-after-reg2mem.ll
+++ test/Transforms/LoopVectorize/X86/parallel-loops-after-reg2mem.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-unknown-linux-gnu"
Index: test/Transforms/LoopVectorize/X86/parallel-loops.ll
===================================================================
--- test/Transforms/LoopVectorize/X86/parallel-loops.ll
+++ test/Transforms/LoopVectorize/X86/parallel-loops.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-unknown-linux-gnu"
Index: test/Transforms/LoopVectorize/X86/small-size.ll
===================================================================
--- test/Transforms/LoopVectorize/X86/small-size.ll
+++ test/Transforms/LoopVectorize/X86/small-size.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s -basicaa -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -loop-vectorize-with-block-frequency -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s -basicaa -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -loop-vectorize-with-block-frequency -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/X86/tripcount.ll
===================================================================
--- test/Transforms/LoopVectorize/X86/tripcount.ll
+++ test/Transforms/LoopVectorize/X86/tripcount.ll
@@ -1,4 +1,4 @@
-; RUN: opt -S -loop-vectorize -force-vector-width=2 -force-vector-unroll=1 -mcpu=prescott < %s | FileCheck %s
+; RUN: opt -S -loop-vectorize -force-vector-width=2 -force-vector-interleave=1 -mcpu=prescott < %s | FileCheck %s
 
 target datalayout = "e-p:32:32:32-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:32:64-f32:32:32-f64:32:64-v64:64:64-v128:128:128-a0:0:64-f80:32:32-n8:16:32-S128"
 target triple = "i386-unknown-freebsd11.0"
Index: test/Transforms/LoopVectorize/X86/unroll-small-loops.ll
===================================================================
--- test/Transforms/LoopVectorize/X86/unroll-small-loops.ll
+++ test/Transforms/LoopVectorize/X86/unroll-small-loops.ll
@@ -1,6 +1,6 @@
-; RUN: opt < %s  -loop-vectorize -mtriple=x86_64-apple-macosx10.8.0 -mcpu=corei7-avx -force-vector-width=4 -force-vector-unroll=0 -dce -S \
+; RUN: opt < %s  -loop-vectorize -mtriple=x86_64-apple-macosx10.8.0 -mcpu=corei7-avx -force-vector-width=4 -force-vector-interleave=0 -dce -S \
 ; RUN:   | FileCheck %s --check-prefix=CHECK-VECTOR
-; RUN: opt < %s  -loop-vectorize -mtriple=x86_64-apple-macosx10.8.0 -mcpu=corei7-avx -force-vector-width=1 -force-vector-unroll=0 -dce -S \
+; RUN: opt < %s  -loop-vectorize -mtriple=x86_64-apple-macosx10.8.0 -mcpu=corei7-avx -force-vector-width=1 -force-vector-interleave=0 -dce -S \
 ; RUN:   | FileCheck %s --check-prefix=CHECK-SCALAR
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
Index: test/Transforms/LoopVectorize/X86/unroll_selection.ll
===================================================================
--- test/Transforms/LoopVectorize/X86/unroll_selection.ll
+++ test/Transforms/LoopVectorize/X86/unroll_selection.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -mtriple=x86_64-apple-macosx10.8.0 -mcpu=corei7-avx -force-vector-width=4 -force-vector-unroll=0 -dce -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -mtriple=x86_64-apple-macosx10.8.0 -mcpu=corei7-avx -force-vector-width=4 -force-vector-interleave=0 -dce -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/X86/vectorization-remarks.ll
===================================================================
--- test/Transforms/LoopVectorize/X86/vectorization-remarks.ll
+++ test/Transforms/LoopVectorize/X86/vectorization-remarks.ll
@@ -1,6 +1,6 @@
 ; RUN: opt < %s -loop-vectorize -mtriple=x86_64-unknown-linux -S -pass-remarks='loop-vectorize' 2>&1 | FileCheck -check-prefix=VECTORIZED %s
-; RUN: opt < %s -loop-vectorize -force-vector-width=1 -force-vector-unroll=4 -mtriple=x86_64-unknown-linux -S -pass-remarks='loop-vectorize' 2>&1 | FileCheck -check-prefix=UNROLLED %s
-; RUN: opt < %s -loop-vectorize -force-vector-width=1 -force-vector-unroll=1 -mtriple=x86_64-unknown-linux -S -pass-remarks-analysis='loop-vectorize' 2>&1 | FileCheck -check-prefix=NONE %s
+; RUN: opt < %s -loop-vectorize -force-vector-width=1 -force-vector-interleave=4 -mtriple=x86_64-unknown-linux -S -pass-remarks='loop-vectorize' 2>&1 | FileCheck -check-prefix=UNROLLED %s
+; RUN: opt < %s -loop-vectorize -force-vector-width=1 -force-vector-interleave=1 -mtriple=x86_64-unknown-linux -S -pass-remarks-analysis='loop-vectorize' 2>&1 | FileCheck -check-prefix=NONE %s
 
 ; This code has all the !dbg annotations needed to track source line information,
 ; but is missing the llvm.dbg.cu annotation. This prevents code generation from
Index: test/Transforms/LoopVectorize/X86/x86_fp80-vector-store.ll
===================================================================
--- test/Transforms/LoopVectorize/X86/x86_fp80-vector-store.ll
+++ test/Transforms/LoopVectorize/X86/x86_fp80-vector-store.ll
@@ -1,4 +1,4 @@
-; RUN: opt -O3 -loop-vectorize -force-vector-unroll=1 -force-vector-width=2 -S < %s | FileCheck %s
+; RUN: opt -O3 -loop-vectorize -force-vector-interleave=1 -force-vector-width=2 -S < %s | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.7.0"
Index: test/Transforms/LoopVectorize/XCore/no-vector-registers.ll
===================================================================
--- test/Transforms/LoopVectorize/XCore/no-vector-registers.ll
+++ test/Transforms/LoopVectorize/XCore/no-vector-registers.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s -loop-vectorize -force-vector-width=4 -force-vector-unroll=2 -S -mtriple=xcore | FileCheck %s
+; RUN: opt < %s -loop-vectorize -force-vector-width=4 -force-vector-interleave=2 -S -mtriple=xcore | FileCheck %s
 
 target datalayout = "e-p:32:32:32-a0:0:32-n32-i1:8:32-i8:8:32-i16:16:32-i32:32:32-i64:32:32-f16:16:32-f32:32:32-f64:32:32"
 target triple = "xcore"
Index: test/Transforms/LoopVectorize/align.ll
===================================================================
--- test/Transforms/LoopVectorize/align.ll
+++ test/Transforms/LoopVectorize/align.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/bsd_regex.ll
===================================================================
--- test/Transforms/LoopVectorize/bsd_regex.ll
+++ test/Transforms/LoopVectorize/bsd_regex.ll
@@ -1,4 +1,4 @@
-; RUN: opt -S -loop-vectorize -dce -instcombine -force-vector-width=2 -force-vector-unroll=2 < %s | FileCheck %s
+; RUN: opt -S -loop-vectorize -dce -instcombine -force-vector-width=2 -force-vector-interleave=2 < %s | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 
Index: test/Transforms/LoopVectorize/bzip_reverse_loops.ll
===================================================================
--- test/Transforms/LoopVectorize/bzip_reverse_loops.ll
+++ test/Transforms/LoopVectorize/bzip_reverse_loops.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S -enable-if-conversion | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S -enable-if-conversion | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/calloc.ll
===================================================================
--- test/Transforms/LoopVectorize/calloc.ll
+++ test/Transforms/LoopVectorize/calloc.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -basicaa -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -basicaa -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.9.0"
Index: test/Transforms/LoopVectorize/cast-induction.ll
===================================================================
--- test/Transforms/LoopVectorize/cast-induction.ll
+++ test/Transforms/LoopVectorize/cast-induction.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 ; rdar://problem/12848162
 
Index: test/Transforms/LoopVectorize/cpp-new-array.ll
===================================================================
--- test/Transforms/LoopVectorize/cpp-new-array.ll
+++ test/Transforms/LoopVectorize/cpp-new-array.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/dbg.value.ll
===================================================================
--- test/Transforms/LoopVectorize/dbg.value.ll
+++ test/Transforms/LoopVectorize/dbg.value.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s -S -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine | FileCheck %s
+; RUN: opt < %s -S -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine | FileCheck %s
 ; Make sure we vectorize with debugging turned on.
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
Index: test/Transforms/LoopVectorize/debugloc.ll
===================================================================
--- test/Transforms/LoopVectorize/debugloc.ll
+++ test/Transforms/LoopVectorize/debugloc.ll
@@ -1,4 +1,4 @@
-; RUN: opt -S < %s -loop-vectorize -force-vector-unroll=1 -force-vector-width=2 | FileCheck %s
+; RUN: opt -S < %s -loop-vectorize -force-vector-interleave=1 -force-vector-width=2 | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 
Index: test/Transforms/LoopVectorize/ee-crash.ll
===================================================================
--- test/Transforms/LoopVectorize/ee-crash.ll
+++ test/Transforms/LoopVectorize/ee-crash.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -S | FileCheck %s
+; RUN: opt < %s -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/flags.ll
===================================================================
--- test/Transforms/LoopVectorize/flags.ll
+++ test/Transforms/LoopVectorize/flags.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/float-reduction.ll
===================================================================
--- test/Transforms/LoopVectorize/float-reduction.ll
+++ test/Transforms/LoopVectorize/float-reduction.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/funcall.ll
===================================================================
--- test/Transforms/LoopVectorize/funcall.ll
+++ test/Transforms/LoopVectorize/funcall.ll
@@ -1,4 +1,4 @@
-; RUN: opt -S -loop-vectorize -force-vector-width=2 -force-vector-unroll=1 < %s | FileCheck %s
+; RUN: opt -S -loop-vectorize -force-vector-width=2 -force-vector-interleave=1 < %s | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 
Index: test/Transforms/LoopVectorize/gcc-examples.ll
===================================================================
--- test/Transforms/LoopVectorize/gcc-examples.ll
+++ test/Transforms/LoopVectorize/gcc-examples.ll
@@ -1,5 +1,5 @@
-; RUN: opt < %s  -basicaa -loop-vectorize -force-vector-width=4 -force-vector-unroll=1 -dce -instcombine -S | FileCheck %s
-; RUN: opt < %s  -basicaa -loop-vectorize -force-vector-width=4 -force-vector-unroll=4 -dce -instcombine -S | FileCheck %s -check-prefix=UNROLL
+; RUN: opt < %s  -basicaa -loop-vectorize -force-vector-width=4 -force-vector-interleave=1 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -basicaa -loop-vectorize -force-vector-width=4 -force-vector-interleave=4 -dce -instcombine -S | FileCheck %s -check-prefix=UNROLL
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/global_alias.ll
===================================================================
--- test/Transforms/LoopVectorize/global_alias.ll
+++ test/Transforms/LoopVectorize/global_alias.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s -O1 -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s -O1 -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:32:32:32-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:64:128-a0:0:64-n32-S64"
 
Index: test/Transforms/LoopVectorize/hoist-loads.ll
===================================================================
--- test/Transforms/LoopVectorize/hoist-loads.ll
+++ test/Transforms/LoopVectorize/hoist-loads.ll
@@ -1,4 +1,4 @@
-; RUN: opt -loop-vectorize -force-vector-width=2 -force-vector-unroll=1 -S < %s | FileCheck %s
+; RUN: opt -loop-vectorize -force-vector-width=2 -force-vector-interleave=1 -S < %s | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 
Index: test/Transforms/LoopVectorize/i8-induction.ll
===================================================================
--- test/Transforms/LoopVectorize/i8-induction.ll
+++ test/Transforms/LoopVectorize/i8-induction.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/if-conv-crash.ll
===================================================================
--- test/Transforms/LoopVectorize/if-conv-crash.ll
+++ test/Transforms/LoopVectorize/if-conv-crash.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -enable-if-conversion
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -enable-if-conversion
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/if-conversion-nest.ll
===================================================================
--- test/Transforms/LoopVectorize/if-conversion-nest.ll
+++ test/Transforms/LoopVectorize/if-conversion-nest.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -enable-if-conversion -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -enable-if-conversion -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 
Index: test/Transforms/LoopVectorize/if-conversion-reduction.ll
===================================================================
--- test/Transforms/LoopVectorize/if-conversion-reduction.ll
+++ test/Transforms/LoopVectorize/if-conversion-reduction.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -enable-if-conversion -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -enable-if-conversion -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.9.0"
Index: test/Transforms/LoopVectorize/if-conversion.ll
===================================================================
--- test/Transforms/LoopVectorize/if-conversion.ll
+++ test/Transforms/LoopVectorize/if-conversion.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -enable-if-conversion -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -enable-if-conversion -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.9.0"
Index: test/Transforms/LoopVectorize/if-pred-stores.ll
===================================================================
--- test/Transforms/LoopVectorize/if-pred-stores.ll
+++ test/Transforms/LoopVectorize/if-pred-stores.ll
@@ -1,5 +1,5 @@
-; RUN: opt -S -vectorize-num-stores-pred=1 -force-vector-width=1 -force-vector-unroll=2 -loop-vectorize < %s | FileCheck %s --check-prefix=UNROLL
-; RUN: opt -S -vectorize-num-stores-pred=1 -force-vector-width=2 -force-vector-unroll=1 -loop-vectorize -enable-cond-stores-vec < %s | FileCheck %s --check-prefix=VEC
+; RUN: opt -S -vectorize-num-stores-pred=1 -force-vector-width=1 -force-vector-interleave=2 -loop-vectorize < %s | FileCheck %s --check-prefix=UNROLL
+; RUN: opt -S -vectorize-num-stores-pred=1 -force-vector-width=2 -force-vector-interleave=1 -loop-vectorize -enable-cond-stores-vec < %s | FileCheck %s --check-prefix=VEC
 target datalayout = "e-m:o-i64:64-f80:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.9.0"
 
Index: test/Transforms/LoopVectorize/increment.ll
===================================================================
--- test/Transforms/LoopVectorize/increment.ll
+++ test/Transforms/LoopVectorize/increment.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/induction.ll
===================================================================
--- test/Transforms/LoopVectorize/induction.ll
+++ test/Transforms/LoopVectorize/induction.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s -loop-vectorize -force-vector-unroll=1 -force-vector-width=2 -S | FileCheck %s
+; RUN: opt < %s -loop-vectorize -force-vector-interleave=1 -force-vector-width=2 -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 
@@ -28,7 +28,7 @@
   ret void
 }
 
-; RUN: opt < %s -loop-vectorize -force-vector-unroll=1 -force-vector-width=2 -instcombine -S | FileCheck %s --check-prefix=IND
+; RUN: opt < %s -loop-vectorize -force-vector-interleave=1 -force-vector-width=2 -instcombine -S | FileCheck %s --check-prefix=IND
 
 ; Make sure we remove unneeded vectorization of induction variables.
 ; In order for instcombine to cleanup the vectorized induction variables that we
Index: test/Transforms/LoopVectorize/induction_plus.ll
===================================================================
--- test/Transforms/LoopVectorize/induction_plus.ll
+++ test/Transforms/LoopVectorize/induction_plus.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -instcombine -S | FileCheck %s
+; RUN: opt < %s -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/intrinsic.ll
===================================================================
--- test/Transforms/LoopVectorize/intrinsic.ll
+++ test/Transforms/LoopVectorize/intrinsic.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-unknown-linux-gnu"
Index: test/Transforms/LoopVectorize/lcssa-crash.ll
===================================================================
--- test/Transforms/LoopVectorize/lcssa-crash.ll
+++ test/Transforms/LoopVectorize/lcssa-crash.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-unknown-linux-gnu"
Index: test/Transforms/LoopVectorize/lifetime.ll
===================================================================
--- test/Transforms/LoopVectorize/lifetime.ll
+++ test/Transforms/LoopVectorize/lifetime.ll
@@ -1,4 +1,4 @@
-; RUN: opt -S -loop-vectorize -force-vector-width=2 -force-vector-unroll=1 < %s | FileCheck %s
+; RUN: opt -S -loop-vectorize -force-vector-width=2 -force-vector-interleave=1 < %s | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 
Index: test/Transforms/LoopVectorize/memdep.ll
===================================================================
--- test/Transforms/LoopVectorize/memdep.ll
+++ test/Transforms/LoopVectorize/memdep.ll
@@ -1,5 +1,5 @@
-; RUN: opt < %s -loop-vectorize -force-vector-width=2 -force-vector-unroll=1 -S | FileCheck %s
-; RUN: opt < %s -loop-vectorize -force-vector-width=4 -force-vector-unroll=1 -S | FileCheck %s -check-prefix=WIDTH
+; RUN: opt < %s -loop-vectorize -force-vector-width=2 -force-vector-interleave=1 -S | FileCheck %s
+; RUN: opt < %s -loop-vectorize -force-vector-width=4 -force-vector-interleave=1 -S | FileCheck %s -check-prefix=WIDTH
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 
Index: test/Transforms/LoopVectorize/metadata-width.ll
===================================================================
--- test/Transforms/LoopVectorize/metadata-width.ll
+++ test/Transforms/LoopVectorize/metadata-width.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-unknown-linux-gnu"
Index: test/Transforms/LoopVectorize/metadata.ll
===================================================================
--- test/Transforms/LoopVectorize/metadata.ll
+++ test/Transforms/LoopVectorize/metadata.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -S | FileCheck %s
 target datalayout = "e-m:e-i64:64-f80:128-n8:16:32:64-S128"
 target triple = "x86_64-unknown-linux-gnu"
 
Index: test/Transforms/LoopVectorize/minmax_reduction.ll
===================================================================
--- test/Transforms/LoopVectorize/minmax_reduction.ll
+++ test/Transforms/LoopVectorize/minmax_reduction.ll
@@ -1,4 +1,4 @@
-; RUN: opt -S -loop-vectorize -dce -instcombine -force-vector-width=2 -force-vector-unroll=1  < %s | FileCheck %s
+; RUN: opt -S -loop-vectorize -dce -instcombine -force-vector-width=2 -force-vector-interleave=1  < %s | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 
Index: test/Transforms/LoopVectorize/multi-use-reduction-bug.ll
===================================================================
--- test/Transforms/LoopVectorize/multi-use-reduction-bug.ll
+++ test/Transforms/LoopVectorize/multi-use-reduction-bug.ll
@@ -1,4 +1,4 @@
-; RUN: opt -indvars -loop-vectorize -force-vector-width=2 -force-vector-unroll=1 -S < %s | FileCheck %s
+; RUN: opt -indvars -loop-vectorize -force-vector-width=2 -force-vector-interleave=1 -S < %s | FileCheck %s
 
 target datalayout = "e-m:o-i64:64-f80:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.9.0"
Index: test/Transforms/LoopVectorize/multiple-address-spaces.ll
===================================================================
--- test/Transforms/LoopVectorize/multiple-address-spaces.ll
+++ test/Transforms/LoopVectorize/multiple-address-spaces.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -basicaa -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -basicaa -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 ; From a simple program with two address spaces:
 ; char Y[4*10000] __attribute__((address_space(1)));
Index: test/Transforms/LoopVectorize/no_idiv_reduction.ll
===================================================================
--- test/Transforms/LoopVectorize/no_idiv_reduction.ll
+++ test/Transforms/LoopVectorize/no_idiv_reduction.ll
@@ -1,4 +1,4 @@
-; RUN: opt -loop-vectorize -force-vector-width=2 -force-vector-unroll=1 -S < %s | FileCheck %s
+; RUN: opt -loop-vectorize -force-vector-width=2 -force-vector-interleave=1 -S < %s | FileCheck %s
 @a = common global [128 x i32] zeroinitializer, align 16
 
 ;; Must not vectorize division reduction. Division is lossy.
Index: test/Transforms/LoopVectorize/no_int_induction.ll
===================================================================
--- test/Transforms/LoopVectorize/no_int_induction.ll
+++ test/Transforms/LoopVectorize/no_int_induction.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 ; int __attribute__((noinline)) sum_array(int *A, int n) {
 ;  return std::accumulate(A, A + n, 0);
Index: test/Transforms/LoopVectorize/no_outside_user.ll
===================================================================
--- test/Transforms/LoopVectorize/no_outside_user.ll
+++ test/Transforms/LoopVectorize/no_outside_user.ll
@@ -1,4 +1,4 @@
-; RUN: opt -S -loop-vectorize -force-vector-unroll=1 -force-vector-width=2 -pass-remarks-analysis=loop-vectorize < %s 2>&1 | FileCheck %s
+; RUN: opt -S -loop-vectorize -force-vector-interleave=1 -force-vector-width=2 -pass-remarks-analysis=loop-vectorize < %s 2>&1 | FileCheck %s
 
 ; CHECK: remark: {{.*}}: loop not vectorized: value could not be identified as an induction or reduction variable
 ; CHECK: remark: {{.*}}: loop not vectorized: use of induction value outside of the loop is not handled by vectorizer
Index: test/Transforms/LoopVectorize/nofloat.ll
===================================================================
--- test/Transforms/LoopVectorize/nofloat.ll
+++ test/Transforms/LoopVectorize/nofloat.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 ; Make sure that we don't vectorize functions with 'noimplicitfloat' attributes.
 
Index: test/Transforms/LoopVectorize/non-const-n.ll
===================================================================
--- test/Transforms/LoopVectorize/non-const-n.ll
+++ test/Transforms/LoopVectorize/non-const-n.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/nsw-crash.ll
===================================================================
--- test/Transforms/LoopVectorize/nsw-crash.ll
+++ test/Transforms/LoopVectorize/nsw-crash.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4
 
 target datalayout =
 "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
Index: test/Transforms/LoopVectorize/opt.ll
===================================================================
--- test/Transforms/LoopVectorize/opt.ll
+++ test/Transforms/LoopVectorize/opt.ll
@@ -1,5 +1,5 @@
-; RUN: opt -S -O3 -force-vector-width=2 -force-vector-unroll=1 < %s | FileCheck --check-prefix=LOOPVEC %s
-; RUN: opt -S -O3 -disable-loop-vectorization -force-vector-width=2 -force-vector-unroll=1 < %s | FileCheck --check-prefix=NOLOOPVEC %s
+; RUN: opt -S -O3 -force-vector-width=2 -force-vector-interleave=1 < %s | FileCheck --check-prefix=LOOPVEC %s
+; RUN: opt -S -O3 -disable-loop-vectorization -force-vector-width=2 -force-vector-interleave=1 < %s | FileCheck --check-prefix=NOLOOPVEC %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/ptr_loops.ll
===================================================================
--- test/Transforms/LoopVectorize/ptr_loops.ll
+++ test/Transforms/LoopVectorize/ptr_loops.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -basicaa -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S -enable-if-conversion | FileCheck %s
+; RUN: opt < %s  -basicaa -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S -enable-if-conversion | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/read-only.ll
===================================================================
--- test/Transforms/LoopVectorize/read-only.ll
+++ test/Transforms/LoopVectorize/read-only.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/reduction.ll
===================================================================
--- test/Transforms/LoopVectorize/reduction.ll
+++ test/Transforms/LoopVectorize/reduction.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/reverse_induction.ll
===================================================================
--- test/Transforms/LoopVectorize/reverse_induction.ll
+++ test/Transforms/LoopVectorize/reverse_induction.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s -loop-vectorize -force-vector-unroll=2 -force-vector-width=4 -S | FileCheck %s
+; RUN: opt < %s -loop-vectorize -force-vector-interleave=2 -force-vector-width=4 -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 
Index: test/Transforms/LoopVectorize/reverse_iter.ll
===================================================================
--- test/Transforms/LoopVectorize/reverse_iter.ll
+++ test/Transforms/LoopVectorize/reverse_iter.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/runtime-check-address-space.ll
===================================================================
--- test/Transforms/LoopVectorize/runtime-check-address-space.ll
+++ test/Transforms/LoopVectorize/runtime-check-address-space.ll
@@ -1,4 +1,4 @@
-; RUN: opt -S -march=r600 -mcpu=cayman -basicaa -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine < %s | FileCheck %s
+; RUN: opt -S -march=r600 -mcpu=cayman -basicaa -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine < %s | FileCheck %s
 
 ; Check vectorization that would ordinarily require a runtime bounds
 ; check on the pointers when mixing address spaces. For now we cannot
Index: test/Transforms/LoopVectorize/runtime-check-readonly-address-space.ll
===================================================================
--- test/Transforms/LoopVectorize/runtime-check-readonly-address-space.ll
+++ test/Transforms/LoopVectorize/runtime-check-readonly-address-space.ll
@@ -1,4 +1,4 @@
-; RUN: opt -S -march=r600 -mcpu=cayman -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine < %s | FileCheck %s
+; RUN: opt -S -march=r600 -mcpu=cayman -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine < %s | FileCheck %s
 
 ; Artificial datalayout
 target datalayout = "e-p:32:32:32-p1:16:16:16-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-v16:16:16-v24:32:32-v32:32:32-v48:64:64-v64:64:64-v96:128:128-v128:128:128-v192:256:256-v256:256:256-v512:512:512-v1024:1024:1024-v2048:2048:2048-n32:64"
Index: test/Transforms/LoopVectorize/runtime-check-readonly.ll
===================================================================
--- test/Transforms/LoopVectorize/runtime-check-readonly.ll
+++ test/Transforms/LoopVectorize/runtime-check-readonly.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/runtime-check.ll
===================================================================
--- test/Transforms/LoopVectorize/runtime-check.ll
+++ test/Transforms/LoopVectorize/runtime-check.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.9.0"
Index: test/Transforms/LoopVectorize/runtime-limit.ll
===================================================================
--- test/Transforms/LoopVectorize/runtime-limit.ll
+++ test/Transforms/LoopVectorize/runtime-limit.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/safegep.ll
===================================================================
--- test/Transforms/LoopVectorize/safegep.ll
+++ test/Transforms/LoopVectorize/safegep.ll
@@ -1,4 +1,4 @@
-; RUN: opt -S -loop-vectorize -force-vector-width=4 -force-vector-unroll=1  < %s |  FileCheck %s
+; RUN: opt -S -loop-vectorize -force-vector-width=4 -force-vector-interleave=1  < %s |  FileCheck %s
 target datalayout = "e-p:32:32:32-S128-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:32:64-f16:16:16-f32:32:32-f64:32:64-f128:128:128-v64:64:64-v128:128:128-a0:0:64-f80:32:32-n8:16:32"
 
 
Index: test/Transforms/LoopVectorize/same-base-access.ll
===================================================================
--- test/Transforms/LoopVectorize/same-base-access.ll
+++ test/Transforms/LoopVectorize/same-base-access.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S -enable-if-conversion | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S -enable-if-conversion | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.9.0"
Index: test/Transforms/LoopVectorize/scalar-select.ll
===================================================================
--- test/Transforms/LoopVectorize/scalar-select.ll
+++ test/Transforms/LoopVectorize/scalar-select.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/scev-exitlim-crash.ll
===================================================================
--- test/Transforms/LoopVectorize/scev-exitlim-crash.ll
+++ test/Transforms/LoopVectorize/scev-exitlim-crash.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s -loop-vectorize -force-vector-unroll=2 -force-vector-width=8 -S | FileCheck %s
+; RUN: opt < %s -loop-vectorize -force-vector-interleave=2 -force-vector-width=8 -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx"
Index: test/Transforms/LoopVectorize/simple-unroll.ll
===================================================================
--- test/Transforms/LoopVectorize/simple-unroll.ll
+++ test/Transforms/LoopVectorize/simple-unroll.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-width=4 -force-vector-unroll=2 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-width=4 -force-vector-interleave=2 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/small-loop.ll
===================================================================
--- test/Transforms/LoopVectorize/small-loop.ll
+++ test/Transforms/LoopVectorize/small-loop.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/start-non-zero.ll
===================================================================
--- test/Transforms/LoopVectorize/start-non-zero.ll
+++ test/Transforms/LoopVectorize/start-non-zero.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -instcombine -S | FileCheck %s
+; RUN: opt < %s -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/store-shuffle-bug.ll
===================================================================
--- test/Transforms/LoopVectorize/store-shuffle-bug.ll
+++ test/Transforms/LoopVectorize/store-shuffle-bug.ll
@@ -1,4 +1,4 @@
-; RUN: opt -S -basicaa -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine < %s | FileCheck %s
+; RUN: opt -S -basicaa -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine < %s | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/struct_access.ll
===================================================================
--- test/Transforms/LoopVectorize/struct_access.ll
+++ test/Transforms/LoopVectorize/struct_access.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -instcombine -S | FileCheck %s
+; RUN: opt < %s -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.9.0"
Index: test/Transforms/LoopVectorize/tbaa-nodep.ll
===================================================================
--- test/Transforms/LoopVectorize/tbaa-nodep.ll
+++ test/Transforms/LoopVectorize/tbaa-nodep.ll
@@ -1,5 +1,5 @@
-; RUN: opt < %s  -tbaa -basicaa -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -simplifycfg -S | FileCheck %s
-; RUN: opt < %s  -basicaa -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -simplifycfg -S | FileCheck %s --check-prefix=CHECK-NOTBAA
+; RUN: opt < %s  -tbaa -basicaa -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -simplifycfg -S | FileCheck %s
+; RUN: opt < %s  -basicaa -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -simplifycfg -S | FileCheck %s --check-prefix=CHECK-NOTBAA
 target datalayout = "e-m:e-i64:64-f80:128-n8:16:32:64-S128"
 target triple = "x86_64-unknown-linux-gnu"
 
Index: test/Transforms/LoopVectorize/undef-inst-bug.ll
===================================================================
--- test/Transforms/LoopVectorize/undef-inst-bug.ll
+++ test/Transforms/LoopVectorize/undef-inst-bug.ll
@@ -1,4 +1,4 @@
-; RUN: opt -S -loop-vectorize -force-vector-width=4 -force-vector-unroll=1 < %s | FileCheck %s
+; RUN: opt -S -loop-vectorize -force-vector-width=4 -force-vector-interleave=1 < %s | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 
Index: test/Transforms/LoopVectorize/unroll_novec.ll
===================================================================
--- test/Transforms/LoopVectorize/unroll_novec.ll
+++ test/Transforms/LoopVectorize/unroll_novec.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-width=1 -force-target-num-scalar-regs=16 -force-target-max-scalar-unroll=8 -force-target-instruction-cost=1 -small-loop-cost=40 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-width=1 -force-target-num-scalar-regs=16 -force-target-max-scalar-interleave=8 -force-target-instruction-cost=1 -small-loop-cost=40 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/value-ptr-bug.ll
===================================================================
--- test/Transforms/LoopVectorize/value-ptr-bug.ll
+++ test/Transforms/LoopVectorize/value-ptr-bug.ll
@@ -1,4 +1,4 @@
-; RUN: opt -S -loop-vectorize -force-vector-width=4 -force-vector-unroll=1 -dce -instcombine < %s | FileCheck %s
+; RUN: opt -S -loop-vectorize -force-vector-width=4 -force-vector-interleave=1 -dce -instcombine < %s | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 
Index: test/Transforms/LoopVectorize/vect.omp.persistence.ll
===================================================================
--- test/Transforms/LoopVectorize/vect.omp.persistence.ll
+++ test/Transforms/LoopVectorize/vect.omp.persistence.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s -O2 -force-vector-unroll=2 -force-vector-width=4 -debug-only=loop-vectorize -stats -S 2>&1 | FileCheck %s
+; RUN: opt < %s -O2 -force-vector-interleave=2 -force-vector-width=4 -debug-only=loop-vectorize -stats -S 2>&1 | FileCheck %s
 ; REQUIRES: asserts
 
 ; Loop from "rotated"
Index: test/Transforms/LoopVectorize/vect.stats.ll
===================================================================
--- test/Transforms/LoopVectorize/vect.stats.ll
+++ test/Transforms/LoopVectorize/vect.stats.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=4 -force-vector-width=4 -debug-only=loop-vectorize -stats -S 2>&1 | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=4 -force-vector-width=4 -debug-only=loop-vectorize -stats -S 2>&1 | FileCheck %s
 ; REQUIRES: asserts
 
 ;
@@ -62,4 +62,4 @@
 
 for.end:
   ret void
-}
\ No newline at end of file
+}
Index: test/Transforms/LoopVectorize/vectorize-once.ll
===================================================================
--- test/Transforms/LoopVectorize/vectorize-once.ll
+++ test/Transforms/LoopVectorize/vectorize-once.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S -simplifycfg | FileCheck %s
+; RUN: opt < %s -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S -simplifycfg | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"
Index: test/Transforms/LoopVectorize/version-mem-access.ll
===================================================================
--- test/Transforms/LoopVectorize/version-mem-access.ll
+++ test/Transforms/LoopVectorize/version-mem-access.ll
@@ -1,4 +1,4 @@
-; RUN: opt -basicaa -loop-vectorize -enable-mem-access-versioning -force-vector-width=2 -force-vector-unroll=1 < %s -S | FileCheck %s
+; RUN: opt -basicaa -loop-vectorize -enable-mem-access-versioning -force-vector-width=2 -force-vector-interleave=1 < %s -S | FileCheck %s
 
 target datalayout = "e-m:o-i64:64-f80:128-n8:16:32:64-S128"
 
Index: test/Transforms/LoopVectorize/write-only.ll
===================================================================
--- test/Transforms/LoopVectorize/write-only.ll
+++ test/Transforms/LoopVectorize/write-only.ll
@@ -1,4 +1,4 @@
-; RUN: opt < %s  -loop-vectorize -force-vector-unroll=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
+; RUN: opt < %s  -loop-vectorize -force-vector-interleave=1 -force-vector-width=4 -dce -instcombine -S | FileCheck %s
 
 target datalayout = "e-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-v64:64:64-v128:128:128-a0:0:64-s0:64:64-f80:128:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx10.8.0"