Index: cfe/trunk/test/Unit/lit.cfg
===================================================================
--- cfe/trunk/test/Unit/lit.cfg
+++ cfe/trunk/test/Unit/lit.cfg
@@ -17,14 +17,11 @@
 
 # test_source_root: The root path where tests are located.
 # test_exec_root: The root path where tests should be run.
-clang_obj_root = getattr(config, 'clang_obj_root', None)
-if clang_obj_root is not None:
-    config.test_exec_root = os.path.join(clang_obj_root, 'unittests')
-    config.test_source_root = config.test_exec_root
+config.test_exec_root = os.path.join(config.clang_obj_root, 'unittests')
+config.test_source_root = config.test_exec_root
 
 # testFormat: The test format to use to interpret tests.
-llvm_build_mode = getattr(config, 'llvm_build_mode', "Debug")
-config.test_format = lit.formats.GoogleTest(llvm_build_mode, 'Tests')
+config.test_format = lit.formats.GoogleTest(config.llvm_build_mode, 'Tests')
 
 # Propagate the temp directory. Windows requires this because it uses \Windows\
 # if none of these are present.
@@ -38,55 +35,6 @@
     if symbolizer in os.environ:
         config.environment[symbolizer] = os.environ[symbolizer]
 
-###
-
-# Check that the object root is known.
-if config.test_exec_root is None:
-    # Otherwise, we haven't loaded the site specific configuration (the user is
-    # probably trying to run on a test file directly, and either the site
-    # configuration hasn't been created by the build system, or we are in an
-    # out-of-tree build situation).
-
-    # Check for 'clang_unit_site_config' user parameter, and use that if available.
-    site_cfg = lit_config.params.get('clang_unit_site_config', None)
-    if site_cfg and os.path.exists(site_cfg):
-        lit_config.load_config(config, site_cfg)
-        raise SystemExit
-
-    # Try to detect the situation where we are using an out-of-tree build by
-    # looking for 'llvm-config'.
-    #
-    # FIXME: I debated (i.e., wrote and threw away) adding logic to
-    # automagically generate the lit.site.cfg if we are in some kind of fresh
-    # build situation. This means knowing how to invoke the build system
-    # though, and I decided it was too much magic.
-
-    llvm_config = lit.util.which('llvm-config', config.environment['PATH'])
-    if not llvm_config:
-        lit_config.fatal('No site specific configuration available!')
-
-    # Get the source and object roots.
-    llvm_src_root = subprocess.check_output(['llvm-config', '--src-root']).strip()
-    llvm_obj_root = subprocess.check_output(['llvm-config', '--obj-root']).strip()
-    clang_src_root = os.path.join(llvm_src_root, "tools", "clang")
-    clang_obj_root = os.path.join(llvm_obj_root, "tools", "clang")
-
-    # Validate that we got a tree which points to here, using the standard
-    # tools/clang layout.
-    this_src_root = os.path.join(os.path.dirname(__file__),'..','..')
-    if os.path.realpath(clang_src_root) != os.path.realpath(this_src_root):
-        lit_config.fatal('No site specific configuration available!')
-
-    # Check that the site specific configuration exists.
-    site_cfg = os.path.join(clang_obj_root, 'test', 'Unit', 'lit.site.cfg')
-    if not os.path.exists(site_cfg):
-        lit_config.fatal('No site specific configuration available!')
-
-    # Okay, that worked. Notify the user of the automagic, and reconfigure.
-    lit_config.note('using out-of-tree build at %r' % clang_obj_root)
-    lit_config.load_config(config, site_cfg)
-    raise SystemExit
-
 shlibpath_var = ''
 if platform.system() == 'Linux':
     shlibpath_var = 'LD_LIBRARY_PATH'
@@ -97,14 +45,7 @@
 
 # in stand-alone builds, shlibdir is clang's build tree
 # while llvm_libs_dir is installed LLVM (and possibly older clang)
-llvm_shlib_dir = getattr(config, 'shlibdir', None)
-if not llvm_shlib_dir:
-    lit_config.fatal('No shlibdir set!')
-# Point the dynamic loader at dynamic libraries in 'lib'.
-llvm_libs_dir = getattr(config, 'llvm_libs_dir', None)
-if not llvm_libs_dir:
-    lit_config.fatal('No LLVM libs dir set!')
-shlibpath = os.path.pathsep.join((llvm_shlib_dir, llvm_libs_dir,
+shlibpath = os.path.pathsep.join((config.shlibdir, config.llvm_libs_dir,
                                  config.environment.get(shlibpath_var,'')))
 
 config.environment[shlibpath_var] = shlibpath
Index: cfe/trunk/test/lit.cfg
===================================================================
--- cfe/trunk/test/lit.cfg
+++ cfe/trunk/test/lit.cfg
@@ -55,13 +55,7 @@
 config.test_source_root = os.path.dirname(__file__)
 
 # test_exec_root: The root path where tests should be run.
-clang_obj_root = getattr(config, 'clang_obj_root', None)
-if clang_obj_root is not None:
-    config.test_exec_root = os.path.join(clang_obj_root, 'test')
-
-# Set llvm_{src,obj}_root for use by others.
-config.llvm_src_root = getattr(config, 'llvm_src_root', None)
-config.llvm_obj_root = getattr(config, 'llvm_obj_root', None)
+config.test_exec_root = os.path.join(config.clang_obj_root, 'test')
 
 # Clear some environment variables that might affect Clang.
 #
@@ -92,91 +86,20 @@
     del config.environment[name]
 
 # Tweak the PATH to include the tools dir and the scripts dir.
-if clang_obj_root is not None:
-    clang_tools_dir = getattr(config, 'clang_tools_dir', None)
-    if not clang_tools_dir:
-        lit_config.fatal('No Clang tools dir set!')
-    llvm_tools_dir = getattr(config, 'llvm_tools_dir', None)
-    if not llvm_tools_dir:
-        lit_config.fatal('No LLVM tools dir set!')
-    path = os.path.pathsep.join((
-            clang_tools_dir, llvm_tools_dir, config.environment['PATH']))
-    config.environment['PATH'] = path
-    # in stand-alone builds, llvm_shlib_dir is clang's build tree
-    # while llvm_libs_dir is installed LLVM (and possibly older clang)
-    llvm_shlib_dir = getattr(config, 'llvm_shlib_dir', None)
-    if not llvm_shlib_dir:
-        lit_config.fatal('No LLVM shlib dir set!')
-    llvm_libs_dir = getattr(config, 'llvm_libs_dir', None)
-    if not llvm_libs_dir:
-        lit_config.fatal('No LLVM libs dir set!')
-    path = os.path.pathsep.join((llvm_shlib_dir, llvm_libs_dir,
-                                 config.environment.get('LD_LIBRARY_PATH','')))
-    config.environment['LD_LIBRARY_PATH'] = path
+path = os.path.pathsep.join((
+        config.clang_tools_dir, config.llvm_tools_dir, config.environment['PATH']))
+config.environment['PATH'] = path
+path = os.path.pathsep.join((config.llvm_shlib_dir, config.llvm_libs_dir,
+                              config.environment.get('LD_LIBRARY_PATH','')))
+config.environment['LD_LIBRARY_PATH'] = path
 
 # Propagate path to symbolizer for ASan/MSan.
 for symbolizer in ['ASAN_SYMBOLIZER_PATH', 'MSAN_SYMBOLIZER_PATH']:
     if symbolizer in os.environ:
         config.environment[symbolizer] = os.environ[symbolizer]
 
-###
-
-# Check that the object root is known.
-if config.test_exec_root is None:
-    # Otherwise, we haven't loaded the site specific configuration (the user is
-    # probably trying to run on a test file directly, and either the site
-    # configuration hasn't been created by the build system, or we are in an
-    # out-of-tree build situation).
-
-    # Check for 'clang_site_config' user parameter, and use that if available.
-    site_cfg = lit_config.params.get('clang_site_config', None)
-    if site_cfg and os.path.exists(site_cfg):
-        lit_config.load_config(config, site_cfg)
-        raise SystemExit
-
-    # Try to detect the situation where we are using an out-of-tree build by
-    # looking for 'llvm-config'.
-    #
-    # FIXME: I debated (i.e., wrote and threw away) adding logic to
-    # automagically generate the lit.site.cfg if we are in some kind of fresh
-    # build situation. This means knowing how to invoke the build system though,
-    # and I decided it was too much magic. We should solve this by just having
-    # the .cfg files generated during the configuration step.
-
-    llvm_config = lit.util.which('llvm-config', config.environment['PATH'])
-    if not llvm_config:
-        lit_config.fatal('No site specific configuration available!')
-
-    # Get the source and object roots.
-    llvm_src_root = subprocess.check_output(['llvm-config', '--src-root']).strip()
-    llvm_obj_root = subprocess.check_output(['llvm-config', '--obj-root']).strip()
-    clang_src_root = os.path.join(llvm_src_root, "tools", "clang")
-    clang_obj_root = os.path.join(llvm_obj_root, "tools", "clang")
-
-    # Validate that we got a tree which points to here, using the standard
-    # tools/clang layout.
-    this_src_root = os.path.dirname(config.test_source_root)
-    if os.path.realpath(clang_src_root) != os.path.realpath(this_src_root):
-        lit_config.fatal('No site specific configuration available!')
-
-    # Check that the site specific configuration exists.
-    site_cfg = os.path.join(clang_obj_root, 'test', 'lit.site.cfg')
-    if not os.path.exists(site_cfg):
-        lit_config.fatal(
-            'No site specific configuration available! You may need to '
-            'run "make test" in your Clang build directory.')
-
-    # Okay, that worked. Notify the user of the automagic, and reconfigure.
-    lit_config.note('using out-of-tree build at %r' % clang_obj_root)
-    lit_config.load_config(config, site_cfg)
-    raise SystemExit
-
-###
-
 # Discover the 'clang' and 'clangcc' to use.
 
-import os
-
 def inferClang(PATH):
     # Determine which clang to use.
     clang = os.getenv('CLANG')
@@ -315,7 +238,7 @@
 # with the full path to the build directory holding that tool.  This
 # ensures that we are testing the tools just built and not some random
 # tools that might happen to be in the user's PATH.
-tool_dirs = os.path.pathsep.join((clang_tools_dir, llvm_tools_dir))
+tool_dirs = os.path.pathsep.join((config.clang_tools_dir, config.llvm_tools_dir))
 
 # Regex assertions to reject neighbor hyphens/dots (seen in some tests).
 # For example, don't match 'clang-check-' or '.clang-format'.
@@ -351,7 +274,7 @@
     if not tool_path:
         # Warn, but still provide a substitution.
         lit_config.note('Did not find ' + tool_name + ' in ' + tool_dirs)
-        tool_path = clang_tools_dir + '/' + tool_name
+        tool_path = config.clang_tools_dir + '/' + tool_name
     config.substitutions.append((pattern, tool_pipe + tool_path))
 
 ###
@@ -451,7 +374,7 @@
 
     cmd = subprocess.Popen(
         [
-            os.path.join(llvm_tools_dir, 'llvm-config'),
+            os.path.join(config.llvm_tools_dir, 'llvm-config'),
             '--assertion-mode',
             '--targets-built',
             '--cxxflags'
Index: clang-tools-extra/trunk/test/Unit/lit.cfg
===================================================================
--- clang-tools-extra/trunk/test/Unit/lit.cfg
+++ clang-tools-extra/trunk/test/Unit/lit.cfg
@@ -9,10 +9,9 @@
 
 # Test Source and Exec root dirs both point to the same directory where google
 # test binaries are built.
-extra_tools_obj_dir = getattr(config, 'extra_tools_obj_dir', None)
-if extra_tools_obj_dir is not None:
-  config.test_source_root = extra_tools_obj_dir
-  config.test_exec_root = config.test_source_root
+
+config.test_source_root = config.extra_tools_obj_dir
+config.test_exec_root = config.test_source_root
 
 # All GoogleTests are named to have 'Tests' as their suffix. The '.' option is
 # a special value for GoogleTest indicating that it should look through the
@@ -20,18 +19,6 @@
 # ;-separated list of subdirectories).
 config.test_format = lit.formats.GoogleTest('.', 'Tests')
 
-# If the site-specific configuration wasn't loaded (e.g. the build system failed
-# to create it or the user is running a test file directly) try to come up with
-# sane config options.
-if config.test_exec_root is None:
-  # Look for a --param=extra_tools_unit_site_config option.
-  site_cfg = lit_config.params.get('extra_tools_unit_site_config', None)
-  if site_cfg and os.path.exists(site_cfg):
-      lit_config.load_config(config, site_cfg)
-      raise SystemExit
-
-  # FIXME: Support out-of-tree builds? See clang/test/Unit/lit.cfg if we care.
-
 shlibpath_var = ''
 if platform.system() == 'Linux':
     shlibpath_var = 'LD_LIBRARY_PATH'
@@ -41,17 +28,11 @@
     shlibpath_var = 'PATH'
 
 # Point the dynamic loader at dynamic libraries in 'lib'.
-shlibdir = getattr(config, 'shlibdir', None)
-if not shlibdir:
-    lit_config.fatal('No shlibdir set!')
-llvm_libs_dir = getattr(config, 'llvm_libs_dir', None)
-if not llvm_libs_dir:
-    lit_config.fatal('No LLVM libs dir set!')
-shlibpath = os.path.pathsep.join((shlibdir, llvm_libs_dir,
+shlibpath = os.path.pathsep.join((config.shlibdir, config.llvm_libs_dir,
                                  config.environment.get(shlibpath_var,'')))
 
 # Win32 seeks DLLs along %PATH%.
 if sys.platform in ['win32', 'cygwin'] and os.path.isdir(shlibdir):
-    shlibpath = os.path.pathsep.join((shlibdir, shlibpath))
+    shlibpath = os.path.pathsep.join((config.shlibdir, shlibpath))
 
 config.environment[shlibpath_var] = shlibpath
Index: clang-tools-extra/trunk/test/lit.cfg
===================================================================
--- clang-tools-extra/trunk/test/lit.cfg
+++ clang-tools-extra/trunk/test/lit.cfg
@@ -54,9 +54,7 @@
 config.test_source_root = os.path.dirname(__file__)
 
 # test_exec_root: The root path where tests should be run.
-clang_tools_binary_dir = getattr(config, 'clang_tools_binary_dir', None)
-if clang_tools_binary_dir is not None:
-    config.test_exec_root = os.path.join(clang_tools_binary_dir, 'test')
+config.test_exec_root = os.path.join(config.clang_tools_binary_dir, 'test')
 
 # Clear some environment variables that might affect Clang.
 #
@@ -88,92 +86,19 @@
     del config.environment[name]
 
 # Tweak the PATH to include the tools dir and the scripts dir.
-if clang_tools_binary_dir is not None:
-    clang_tools_dir = getattr(config, 'clang_tools_dir', None)
-    if not clang_tools_dir:
-        lit_config.fatal('No Clang tools dir set!')
-    llvm_tools_dir = getattr(config, 'llvm_tools_dir', None)
-    if not llvm_tools_dir:
-        lit_config.fatal('No LLVM tools dir set!')
-    path = os.path.pathsep.join((
-            clang_tools_dir, llvm_tools_dir, config.environment['PATH']))
-    config.environment['PATH'] = path
-
-    clang_libs_dir = getattr(config, 'clang_libs_dir', None)
-    if not clang_libs_dir:
-        lit_config.fatal('No Clang libs dir set!')
-    llvm_libs_dir = getattr(config, 'llvm_libs_dir', None)
-    if not llvm_libs_dir:
-        lit_config.fatal('No LLVM libs dir set!')
-    path = os.path.pathsep.join((clang_libs_dir, llvm_libs_dir,
-                                 config.environment.get('LD_LIBRARY_PATH','')))
-    config.environment['LD_LIBRARY_PATH'] = path
-
-###
-
-# Check that the object root is known.
-if config.test_exec_root is None:
-    # Otherwise, we haven't loaded the site specific configuration (the user is
-    # probably trying to run on a test file directly, and either the site
-    # configuration hasn't been created by the build system, or we are in an
-    # out-of-tree build situation).
-
-    # Check for 'clang_site_config' user parameter, and use that if available.
-    site_cfg = lit_config.params.get('clang_tools_extra_site_config', None)
-    if site_cfg and os.path.exists(site_cfg):
-        lit_config.load_config(config, site_cfg)
-        raise SystemExit
-
-    # Try to detect the situation where we are using an out-of-tree build by
-    # looking for 'llvm-config'.
-    #
-    # FIXME: I debated (i.e., wrote and threw away) adding logic to
-    # automagically generate the lit.site.cfg if we are in some kind of fresh
-    # build situation. This means knowing how to invoke the build system though,
-    # and I decided it was too much magic. We should solve this by just having
-    # the .cfg files generated during the configuration step.
-
-    llvm_config = lit.util.which('llvm-config', config.environment['PATH'])
-    if not llvm_config:
-        lit_config.fatal('No site specific configuration available!')
-
-    # Get the source and object roots.
-    llvm_src_root = lit.util.capture(['llvm-config', '--src-root']).strip()
-    llvm_obj_root = lit.util.capture(['llvm-config', '--obj-root']).strip()
-    clang_src_root = os.path.join(llvm_src_root, "tools", "clang")
-    clang_obj_root = os.path.join(llvm_obj_root, "tools", "clang")
-
-    clang_tools_extra_src_root = os.path.join(clang_src_root, "tools", "extra")
-    clang_tools_extra_obj_root = os.path.join(clang_obj_root, "tools", "extra")
-    # Validate that we got a tree which points to here, using the standard
-    # tools/clang layout.
-    this_src_root = os.path.dirname(config.test_source_root)
-    if os.path.realpath(clang_tools_extra_src_root) != os.path.realpath(this_src_root):
-        lit_config.fatal('No site specific configuration available!')
-
-    # Check that the site specific configuration exists.
-    site_cfg = os.path.join(clang_tools_extra_obj_root, 'test', 'lit.site.cfg')
-    if not os.path.exists(site_cfg):
-        lit_config.fatal(
-            'No site specific configuration available! You may need to '
-            'run "make test" in your Clang build directory.')
-
-    # Okay, that worked. Notify the user of the automagic, and reconfigure.
-    lit_config.note('using out-of-tree build at %r' % clang_obj_root)
-    lit_config.load_config(config, site_cfg)
-    raise SystemExit
-
-###
-
-import os
+path = os.path.pathsep.join((
+        config.clang_tools_dir, config.llvm_tools_dir, config.environment['PATH']))
+config.environment['PATH'] = path
+
+path = os.path.pathsep.join((config.clang_libs_dir, config.llvm_libs_dir,
+                              config.environment.get('LD_LIBRARY_PATH','')))
+config.environment['LD_LIBRARY_PATH'] = path
 
 # When running under valgrind, we mangle '-vg' onto the end of the triple so we
 # can check it with XFAIL and XTARGET.
 if lit_config.useValgrind:
     config.target_triple += '-vg'
 
-###
-
 # Set available features we allow tests to conditionalize on.
 #
 # As of 2011.08, crash-recovery tests still do not pass on FreeBSD.
Index: compiler-rt/trunk/test/lit.common.cfg
===================================================================
--- compiler-rt/trunk/test/lit.common.cfg
+++ compiler-rt/trunk/test/lit.common.cfg
@@ -73,10 +73,9 @@
     del config.environment[name]
 
 # Tweak PATH to include llvm tools dir.
-llvm_tools_dir = getattr(config, 'llvm_tools_dir', None)
-if (not llvm_tools_dir) or (not os.path.exists(llvm_tools_dir)):
-  lit_config.fatal("Invalid llvm_tools_dir config attribute: %r" % llvm_tools_dir)
-path = os.path.pathsep.join((llvm_tools_dir, config.environment['PATH']))
+if (not config.llvm_tools_dir) or (not os.path.exists(config.llvm_tools_dir)):
+  lit_config.fatal("Invalid llvm_tools_dir config attribute: %r" % config.llvm_tools_dir)
+path = os.path.pathsep.join((config.llvm_tools_dir, config.environment['PATH']))
 config.environment['PATH'] = path
 
 # Help MSVS link.exe find the standard libraries.
@@ -193,7 +192,7 @@
 else:
   config.substitutions.append( ("%macos_min_target_10_11", "") )
 
-sancovcc_path = os.path.join(llvm_tools_dir, "sancov") 
+sancovcc_path = os.path.join(config.llvm_tools_dir, "sancov")
 if os.path.exists(sancovcc_path):
   config.available_features.add("has_sancovcc")
   config.substitutions.append( ("%sancovcc ", sancovcc_path) )
@@ -254,7 +253,7 @@
       stdout = subprocess.PIPE,
       env=config.environment)
 except OSError:
-  print("Could not find llvm-config in " + llvm_tools_dir)
+  print("Could not find llvm-config in " + config.llvm_tools_dir)
   exit(42)
 
 if re.search(r'ON', llvm_config_cmd.stdout.read().decode('ascii')):
Index: compiler-rt/trunk/test/profile/lit.cfg
===================================================================
--- compiler-rt/trunk/test/profile/lit.cfg
+++ compiler-rt/trunk/test/profile/lit.cfg
@@ -22,17 +22,6 @@
         config.profile_lit_binary_dir is not None:
     config.test_exec_root = os.path.join(config.profile_lit_binary_dir, config.name)
 
-# If the above check didn't work, we're probably in the source tree.  Use some
-# magic to re-execute from the build tree.
-if config.test_exec_root is None:
-    # The magic relies on knowing compilerrt_site_basedir.
-    compilerrt_basedir = lit_config.params.get('compilerrt_site_basedir', None)
-    if compilerrt_basedir:
-        site_cfg = os.path.join(compilerrt_basedir, 'profile', 'lit.site.cfg')
-        if os.path.exists(site_cfg):
-            lit_config.load_config(config, site_cfg)
-            raise SystemExit
-
 if config.host_os in ['Linux']:
   extra_link_flags = ["-ldl"]
 else:
Index: compiler-rt/trunk/unittests/lit.common.unit.cfg
===================================================================
--- compiler-rt/trunk/unittests/lit.common.unit.cfg
+++ compiler-rt/trunk/unittests/lit.common.unit.cfg
@@ -16,7 +16,7 @@
 config.suffixes = []
 
 # Tweak PATH to include llvm tools dir.
-llvm_tools_dir = getattr(config, 'llvm_tools_dir', None)
+llvm_tools_dir = config.llvm_tools_dir
 if (not llvm_tools_dir) or (not os.path.exists(llvm_tools_dir)):
   lit_config.fatal("Invalid llvm_tools_dir config attribute: %r" % llvm_tools_dir)
 path = os.path.pathsep.join((llvm_tools_dir, config.environment['PATH']))
Index: lld/trunk/test/Unit/lit.cfg
===================================================================
--- lld/trunk/test/Unit/lit.cfg
+++ lld/trunk/test/Unit/lit.cfg
@@ -17,7 +17,21 @@
 config.test_source_root = os.path.join(config.lld_obj_root, 'unittests')
 config.test_exec_root = config.test_source_root
 
+
+# Tweak the PATH to include the tools dir.
+path = os.path.pathsep.join((config.lld_tools_dir, config.llvm_tools_dir, config.environment['PATH']))
+config.environment['PATH'] = path
+
+path = os.path.pathsep.join((config.lld_libs_dir, config.llvm_libs_dir,
+                              config.environment.get('LD_LIBRARY_PATH','')))
+config.environment['LD_LIBRARY_PATH'] = path
+
+# Propagate LLVM_SRC_ROOT into the environment.
+config.environment['LLVM_SRC_ROOT'] = config.llvm_src_root
+
+# Propagate PYTHON_EXECUTABLE into the environment
+config.environment['PYTHON_EXECUTABLE'] = sys.executable
+
+
 # testFormat: The test format to use to interpret tests.
-if not hasattr(config, 'llvm_build_mode'):
-    lit_config.fatal("unable to find llvm_build_mode value on config")
 config.test_format = lit.formats.GoogleTest(config.llvm_build_mode, 'Tests')
Index: lld/trunk/test/Unit/lit.site.cfg.in
===================================================================
--- lld/trunk/test/Unit/lit.site.cfg.in
+++ lld/trunk/test/Unit/lit.site.cfg.in
@@ -8,6 +8,8 @@
 config.lit_tools_dir = "@LLVM_LIT_TOOLS_DIR@"
 config.lld_obj_root = "@LLD_BINARY_DIR@"
 config.lld_src_root = "@LLD_SOURCE_DIR@"
+config.lld_libs_dir = "@LLVM_LIBRARY_OUTPUT_INTDIR@"
+config.lld_tools_dir = "@LLVM_RUNTIME_OUTPUT_INTDIR@"
 config.target_triple = "@TARGET_TRIPLE@"
 config.python_executable = "@PYTHON_EXECUTABLE@"
 
Index: lld/trunk/test/lit.cfg
===================================================================
--- lld/trunk/test/lit.cfg
+++ lld/trunk/test/lit.cfg
@@ -55,95 +55,23 @@
 # test_source_root: The root path where tests are located.
 config.test_source_root = os.path.dirname(__file__)
 
-# test_exec_root: The root path where tests should be run.
-lld_obj_root = getattr(config, 'lld_obj_root', None)
-if lld_obj_root is not None:
-    config.test_exec_root = os.path.join(lld_obj_root, 'test')
-
-# Set llvm_{src,obj}_root for use by others.
-config.llvm_src_root = getattr(config, 'llvm_src_root', None)
-config.llvm_obj_root = getattr(config, 'llvm_obj_root', None)
+config.test_exec_root = os.path.join(config.lld_obj_root, 'test')
+
 
 # Tweak the PATH to include the tools dir and the scripts dir.
-if lld_obj_root is not None:
-    lld_tools_dir = getattr(config, 'lld_tools_dir', None)
-    if not lld_tools_dir:
-        lit_config.fatal('No LLD tools dir set!')
-    llvm_tools_dir = getattr(config, 'llvm_tools_dir', None)
-    if not llvm_tools_dir:
-        lit_config.fatal('No LLVM tools dir set!')
-    path = os.path.pathsep.join((lld_tools_dir, llvm_tools_dir, config.environment['PATH']))
-    path = os.path.pathsep.join((os.path.join(getattr(config, 'llvm_src_root', None),'test','Scripts'),path))
-
-    config.environment['PATH'] = path
-
-    lld_libs_dir = getattr(config, 'lld_libs_dir', None)
-    if not lld_libs_dir:
-        lit_config.fatal('No LLD libs dir set!')
-    llvm_libs_dir = getattr(config, 'llvm_libs_dir', None)
-    if not llvm_libs_dir:
-        lit_config.fatal('No LLVM libs dir set!')
-    path = os.path.pathsep.join((lld_libs_dir, llvm_libs_dir,
-                                 config.environment.get('LD_LIBRARY_PATH','')))
-    config.environment['LD_LIBRARY_PATH'] = path
-
-    # Propagate LLVM_SRC_ROOT into the environment.
-    config.environment['LLVM_SRC_ROOT'] = getattr(config, 'llvm_src_root', '')
-
-    # Propagate PYTHON_EXECUTABLE into the environment
-    config.environment['PYTHON_EXECUTABLE'] = getattr(config, 'python_executable',
-                                                      '')
-###
+path = os.path.pathsep.join((config.lld_tools_dir, config.llvm_tools_dir, config.environment['PATH']))
+
+config.environment['PATH'] = path
+
+path = os.path.pathsep.join((config.lld_libs_dir, config.llvm_libs_dir,
+                              config.environment.get('LD_LIBRARY_PATH','')))
+config.environment['LD_LIBRARY_PATH'] = path
+
+# Propagate LLVM_SRC_ROOT into the environment.
+config.environment['LLVM_SRC_ROOT'] = config.llvm_src_root
 
-# Check that the object root is known.
-if config.test_exec_root is None:
-    # Otherwise, we haven't loaded the site specific configuration (the user is
-    # probably trying to run on a test file directly, and either the site
-    # configuration hasn't been created by the build system, or we are in an
-    # out-of-tree build situation).
-
-    # Check for 'lld_site_config' user parameter, and use that if available.
-    site_cfg = lit_config.params.get('lld_site_config', None)
-    if site_cfg and os.path.exists(site_cfg):
-        lit_config.load_config(config, site_cfg)
-        raise SystemExit
-
-    # Try to detect the situation where we are using an out-of-tree build by
-    # looking for 'llvm-config'.
-    #
-    # FIXME: I debated (i.e., wrote and threw away) adding logic to
-    # automagically generate the lit.site.cfg if we are in some kind of fresh
-    # build situation. This means knowing how to invoke the build system though,
-    # and I decided it was too much magic. We should solve this by just having
-    # the .cfg files generated during the configuration step.
-
-    llvm_config = lit.util.which('llvm-config', config.environment['PATH'])
-    if not llvm_config:
-        lit_config.fatal('No site specific configuration available!')
-
-    # Get the source and object roots.
-    llvm_src_root = subprocess.check_output(['llvm-config', '--src-root']).strip()
-    llvm_obj_root = subprocess.check_output(['llvm-config', '--obj-root']).strip()
-    lld_src_root = os.path.join(llvm_src_root, "tools", "lld")
-    lld_obj_root = os.path.join(llvm_obj_root, "tools", "lld")
-
-    # Validate that we got a tree which points to here, using the standard
-    # tools/lld layout.
-    this_src_root = os.path.dirname(config.test_source_root)
-    if os.path.realpath(lld_src_root) != os.path.realpath(this_src_root):
-        lit_config.fatal('No site specific configuration available!')
-
-    # Check that the site specific configuration exists.
-    site_cfg = os.path.join(lld_obj_root, 'test', 'lit.site.cfg')
-    if not os.path.exists(site_cfg):
-        lit_config.fatal(
-            'No site specific configuration available! You may need to '
-            'run "make test" in your lld build directory.')
-
-    # Okay, that worked. Notify the user of the automagic, and reconfigure.
-    lit_config.note('using out-of-tree build at %r' % lld_obj_root)
-    lit_config.load_config(config, site_cfg)
-    raise SystemExit
+# Propagate PYTHON_EXECUTABLE into the environment
+config.environment['PYTHON_EXECUTABLE'] = sys.executable
 
 # For each occurrence of a lld tool name as its own word, replace it
 # with the full path to the build directory holding that tool.  This
@@ -185,7 +113,7 @@
     if not tool_path:
         # Warn, but still provide a substitution.
         lit_config.note('Did not find ' + tool_name + ' in ' + path)
-        tool_path = llvm_tools_dir + '/' + tool_name
+        tool_path = config.llvm_tools_dir + '/' + tool_name
     config.substitutions.append((pattern, tool_pipe + tool_path))
 
 # Add site-specific substitutions.
@@ -227,11 +155,11 @@
 import subprocess
 try:
     llvm_config_cmd = \
-     subprocess.Popen([os.path.join(llvm_tools_dir, 'llvm-config'),
+     subprocess.Popen([os.path.join(config.llvm_tools_dir, 'llvm-config'),
                      '--build-mode', '--assertion-mode', '--targets-built'],
                       stdout = subprocess.PIPE)
 except OSError as why:
-    print("Could not find llvm-config in " + llvm_tools_dir)
+    print("Could not find llvm-config in " + config.llvm_tools_dir)
     exit(42)
 
 llvm_config_output = llvm_config_cmd.stdout.read().decode('utf_8')
Index: lldb/trunk/lit/Unit/lit.cfg
===================================================================
--- lldb/trunk/lit/Unit/lit.cfg
+++ lldb/trunk/lit/Unit/lit.cfg
@@ -6,19 +6,6 @@
 
 import lit.formats
 
-# Check that the object root is known.
-if config.test_exec_root is None:
-    # Otherwise, we haven't loaded the site specific configuration (the user is
-    # probably trying to run on a test file directly, and either the site
-    # configuration hasn't been created by the build system, or we are in an
-    # out-of-tree build situation).
-
-    # Check for 'llvm_unit_site_config' user parameter, and use that if available.
-    site_cfg = lit_config.params.get('lldb_unit_site_config', None)
-    if site_cfg and os.path.exists(site_cfg):
-        lit_config.load_config(config, site_cfg)
-        raise SystemExit
-
 # name: The name of this test suite.
 config.name = 'lldb-Unit'
 
@@ -31,6 +18,4 @@
 config.test_exec_root = config.test_source_root
 
 # testFormat: The test format to use to interpret tests.
-if not hasattr(config, 'llvm_build_mode'):
-    lit_config.fatal("unable to find llvm_build_mode value on config")
 config.test_format = lit.formats.GoogleTest(config.llvm_build_mode, 'Tests')
Index: lldb/trunk/lit/lit.cfg
===================================================================
--- lldb/trunk/lit/lit.cfg
+++ lldb/trunk/lit/lit.cfg
@@ -29,94 +29,24 @@
 config.test_source_root = os.path.dirname(__file__)
 
 # test_exec_root: The root path where tests should be run.
-lldb_obj_root = getattr(config, 'lldb_obj_root', None)
-if lldb_obj_root is not None:
-    config.test_exec_root = os.path.join(lldb_obj_root, 'lit')
-
-# Set llvm_{src,obj}_root for use by others.
-config.llvm_src_root = getattr(config, 'llvm_src_root', None)
-config.llvm_obj_root = getattr(config, 'llvm_obj_root', None)
+config.test_exec_root = os.path.join(config.lldb_obj_root, 'lit')
 
 # Tweak the PATH to include the tools dir and the scripts dir.
-if lldb_obj_root is not None:
-    lldb_tools_dir = getattr(config, 'lldb_tools_dir', None)
-    if not lldb_tools_dir:
-        lit_config.fatal('No LLDB tools dir set!')
-    llvm_tools_dir = getattr(config, 'llvm_tools_dir', None)
-    if not llvm_tools_dir:
-        lit_config.fatal('No LLVM tools dir set!')
-    path = os.path.pathsep.join((lldb_tools_dir, llvm_tools_dir, config.environment['PATH']))
-    path = os.path.pathsep.join((os.path.join(getattr(config, 'llvm_src_root', None),'test','Scripts'),path))
-
-    config.environment['PATH'] = path
-
-    lldb_libs_dir = getattr(config, 'lldb_libs_dir', None)
-    if not lldb_libs_dir:
-        lit_config.fatal('No LLDB libs dir set!')
-    llvm_libs_dir = getattr(config, 'llvm_libs_dir', None)
-    if not llvm_libs_dir:
-        lit_config.fatal('No LLVM libs dir set!')
-    path = os.path.pathsep.join((lldb_libs_dir, llvm_libs_dir,
-                                 config.environment.get('LD_LIBRARY_PATH','')))
-    config.environment['LD_LIBRARY_PATH'] = path
-
-    # Propagate LLVM_SRC_ROOT into the environment.
-    config.environment['LLVM_SRC_ROOT'] = getattr(config, 'llvm_src_root', '')
-
-    # Propagate PYTHON_EXECUTABLE into the environment
-    config.environment['PYTHON_EXECUTABLE'] = getattr(config, 'python_executable',
-                                                      '')
-###
-
-# Check that the object root is known.
-if config.test_exec_root is None:
-    # Otherwise, we haven't loaded the site specific configuration (the user is
-    # probably trying to run on a test file directly, and either the site
-    # configuration hasn't been created by the build system, or we are in an
-    # out-of-tree build situation).
-
-    # Check for 'lldb_site_config' user parameter, and use that if available.
-    site_cfg = lit_config.params.get('lldb_site_config', None)
-    if site_cfg and os.path.exists(site_cfg):
-        lit_config.load_config(config, site_cfg)
-        raise SystemExit
-
-    # Try to detect the situation where we are using an out-of-tree build by
-    # looking for 'llvm-config'.
-    #
-    # FIXME: I debated (i.e., wrote and threw away) adding logic to
-    # automagically generate the lit.site.cfg if we are in some kind of fresh
-    # build situation. This means knowing how to invoke the build system though,
-    # and I decided it was too much magic. We should solve this by just having
-    # the .cfg files generated during the configuration step.
-
-    llvm_config = lit.util.which('llvm-config', config.environment['PATH'])
-    if not llvm_config:
-        lit_config.fatal('No site specific configuration available!')
-
-    # Get the source and object roots.
-    llvm_src_root = subprocess.check_output(['llvm-config', '--src-root']).strip()
-    llvm_obj_root = subprocess.check_output(['llvm-config', '--obj-root']).strip()
-    lldb_src_root = os.path.join(llvm_src_root, "tools", "lldb")
-    lldb_obj_root = os.path.join(llvm_obj_root, "tools", "lldb")
-
-    # Validate that we got a tree which points to here, using the standard
-    # tools/lldb layout.
-    this_src_root = os.path.dirname(config.test_source_root)
-    if os.path.realpath(lldb_src_root) != os.path.realpath(this_src_root):
-        lit_config.fatal('No site specific configuration available!')
-
-    # Check that the site specific configuration exists.
-    site_cfg = os.path.join(lldb_obj_root, 'test', 'lit.site.cfg')
-    if not os.path.exists(site_cfg):
-        lit_config.fatal(
-            'No site specific configuration available! You may need to '
-            'run "make test" in your lldb build directory.')
-
-    # Okay, that worked. Notify the user of the automagic, and reconfigure.
-    lit_config.note('using out-of-tree build at %r' % lldb_obj_root)
-    lit_config.load_config(config, site_cfg)
-    raise SystemExit
+lldb_tools_dir = config.lldb_tools_dir
+llvm_tools_dir = config.llvm_tools_dir
+path = os.path.pathsep.join((config.lldb_tools_dir, config.llvm_tools_dir, config.environment['PATH']))
+
+config.environment['PATH'] = path
+
+path = os.path.pathsep.join((config.lldb_libs_dir, config.llvm_libs_dir,
+                              config.environment.get('LD_LIBRARY_PATH','')))
+config.environment['LD_LIBRARY_PATH'] = path
+
+# Propagate LLVM_SRC_ROOT into the environment.
+config.environment['LLVM_SRC_ROOT'] = getattr(config, 'llvm_src_root', '')
+
+# Propagate PYTHON_EXECUTABLE into the environment
+config.environment['PYTHON_EXECUTABLE'] = getattr(config, 'python_executable',
 
 # Register substitutions
 config.substitutions.append(('%python', config.python_executable))
Index: llvm/trunk/CMakeLists.txt
===================================================================
--- llvm/trunk/CMakeLists.txt
+++ llvm/trunk/CMakeLists.txt
@@ -845,7 +845,6 @@
   add_subdirectory(utils/PerfectShuffle)
   add_subdirectory(utils/count)
   add_subdirectory(utils/not)
-  add_subdirectory(utils/llvm-lit)
   add_subdirectory(utils/yaml-bench)
 else()
   if ( LLVM_INCLUDE_TESTS )
@@ -932,6 +931,11 @@
 
 add_subdirectory(cmake/modules)
 
+# Do this last so that all lit targets have already been created.
+if (LLVM_INCLUDE_UTILS)
+  add_subdirectory(utils/llvm-lit)
+endif()
+
 if (NOT LLVM_INSTALL_TOOLCHAIN_ONLY)
   install(DIRECTORY include/llvm include/llvm-c
     DESTINATION include
Index: llvm/trunk/cmake/modules/AddLLVM.cmake
===================================================================
--- llvm/trunk/cmake/modules/AddLLVM.cmake
+++ llvm/trunk/cmake/modules/AddLLVM.cmake
@@ -1174,6 +1174,13 @@
   endif()
 
   configure_file(${input} ${output} @ONLY)
+  get_filename_component(INPUT_DIR ${input} DIRECTORY)
+  if (EXISTS "${INPUT_DIR}/lit.cfg")
+    set(PYTHON_STATEMENT "map_config('${INPUT_DIR}/lit.cfg', '${output}')")
+    get_property(LLVM_LIT_CONFIG_MAP GLOBAL PROPERTY LLVM_LIT_CONFIG_MAP)
+    set(LLVM_LIT_CONFIG_MAP "${LLVM_LIT_CONFIG_MAP}\n${PYTHON_STATEMENT}")
+    set_property(GLOBAL PROPERTY LLVM_LIT_CONFIG_MAP ${LLVM_LIT_CONFIG_MAP})
+  endif()
 endfunction()
 
 # A raw function to create a lit target. This is used to implement the testuite
@@ -1185,12 +1192,16 @@
   if (NOT CMAKE_CFG_INTDIR STREQUAL ".")
     list(APPEND LIT_ARGS --param build_mode=${CMAKE_CFG_INTDIR})
   endif ()
-  if (EXISTS ${LLVM_MAIN_SRC_DIR}/utils/lit/lit.py)
-    set (LIT_COMMAND "${PYTHON_EXECUTABLE};${LLVM_MAIN_SRC_DIR}/utils/lit/lit.py"
-         CACHE STRING "Command used to spawn llvm-lit")
-  else()
-    find_program(LIT_COMMAND NAMES llvm-lit lit.py lit)
+
+  if (WIN32 AND NOT CYGWIN)
+    # llvm-lit needs suffix.py for multiprocess to find a main module.
+    set(suffix .py)
   endif ()
+  set(llvm_lit_path ${LLVM_RUNTIME_OUTPUT_INTDIR}/llvm-lit${suffix})
+
+  set (LIT_COMMAND "${PYTHON_EXECUTABLE};${llvm_lit_path}"
+        CACHE STRING "Command used to spawn llvm-lit" FORCE)
+
   list(APPEND LIT_COMMAND ${LIT_ARGS})
   foreach(param ${ARG_PARAMS})
     list(APPEND LIT_COMMAND --param ${param})
Index: llvm/trunk/test/Unit/lit.cfg
===================================================================
--- llvm/trunk/test/Unit/lit.cfg
+++ llvm/trunk/test/Unit/lit.cfg
@@ -18,14 +18,11 @@
 
 # test_source_root: The root path where tests are located.
 # test_exec_root: The root path where tests should be run.
-llvm_obj_root = getattr(config, 'llvm_obj_root', None)
-if llvm_obj_root is not None:
-    config.test_exec_root = os.path.join(llvm_obj_root, 'unittests')
-    config.test_source_root = config.test_exec_root
+config.test_exec_root = os.path.join(config.llvm_obj_root, 'unittests')
+config.test_source_root = config.test_exec_root
 
 # testFormat: The test format to use to interpret tests.
-llvm_build_mode = getattr(config, 'llvm_build_mode', "Debug")
-config.test_format = lit.formats.GoogleTest(llvm_build_mode, 'Tests')
+config.test_format = lit.formats.GoogleTest(config.llvm_build_mode, 'Tests')
 
 # Propagate the temp directory. Windows requires this because it uses \Windows\
 # if none of these are present.
@@ -47,49 +44,3 @@
 # Win32 may use %SYSTEMDRIVE% during file system shell operations, so propogate.
 if sys.platform == 'win32' and 'SYSTEMDRIVE' in os.environ:
     config.environment['SYSTEMDRIVE'] = os.environ['SYSTEMDRIVE']
-
-###
-
-# Check that the object root is known.
-if config.test_exec_root is None:
-    # Otherwise, we haven't loaded the site specific configuration (the user is
-    # probably trying to run on a test file directly, and either the site
-    # configuration hasn't been created by the build system, or we are in an
-    # out-of-tree build situation).
-
-    # Check for 'llvm_unit_site_config' user parameter, and use that if available.
-    site_cfg = lit_config.params.get('llvm_unit_site_config', None)
-    if site_cfg and os.path.exists(site_cfg):
-        lit_config.load_config(config, site_cfg)
-        raise SystemExit
-
-    # Try to detect the situation where we are using an out-of-tree build by
-    # looking for 'llvm-config'.
-    #
-    # FIXME: I debated (i.e., wrote and threw away) adding logic to
-    # automagically generate the lit.site.cfg if we are in some kind of fresh
-    # build situation. This means knowing how to invoke the build system
-    # though, and I decided it was too much magic.
-
-    llvm_config = lit.util.which('llvm-config', config.environment['PATH'])
-    if not llvm_config:
-        lit_config.fatal('No site specific configuration available!')
-
-    # Get the source and object roots.
-    llvm_src_root = subprocess.check_output(['llvm-config', '--src-root']).strip()
-    llvm_obj_root = subprocess.check_output(['llvm-config', '--obj-root']).strip()
-
-    # Validate that we got a tree which points to here.
-    this_src_root = os.path.join(os.path.dirname(__file__),'..','..')
-    if os.path.realpath(llvm_src_root) != os.path.realpath(this_src_root):
-        lit_config.fatal('No site specific configuration available!')
-
-    # Check that the site specific configuration exists.
-    site_cfg = os.path.join(llvm_obj_root, 'test', 'Unit', 'lit.site.cfg')
-    if not os.path.exists(site_cfg):
-        lit_config.fatal('No site specific configuration available!')
-
-    # Okay, that worked. Notify the user of the automagic, and reconfigure.
-    lit_config.note('using out-of-tree build at %r' % llvm_obj_root)
-    lit_config.load_config(config, site_cfg)
-    raise SystemExit
Index: llvm/trunk/test/lit.cfg
===================================================================
--- llvm/trunk/test/lit.cfg
+++ llvm/trunk/test/lit.cfg
@@ -53,17 +53,11 @@
 config.test_source_root = os.path.dirname(__file__)
 
 # test_exec_root: The root path where tests should be run.
-llvm_obj_root = getattr(config, 'llvm_obj_root', None)
-if llvm_obj_root is not None:
-    config.test_exec_root = os.path.join(llvm_obj_root, 'test')
+config.test_exec_root = os.path.join(config.llvm_obj_root, 'test')
 
 # Tweak the PATH to include the tools dir.
-if llvm_obj_root is not None:
-    llvm_tools_dir = getattr(config, 'llvm_tools_dir', None)
-    if not llvm_tools_dir:
-        lit_config.fatal('No LLVM tools dir set!')
-    path = os.path.pathsep.join((llvm_tools_dir, config.environment['PATH']))
-    config.environment['PATH'] = path
+path = os.path.pathsep.join((config.llvm_tools_dir, config.environment['PATH']))
+config.environment['PATH'] = path
 
 # Propagate 'HOME' through the environment.
 if 'HOME' in os.environ:
@@ -85,7 +79,7 @@
     config.environment['TEMP'] = os.environ['TEMP']
 
 # Propagate LLVM_SRC_ROOT into the environment.
-config.environment['LLVM_SRC_ROOT'] = getattr(config, 'llvm_src_root', '')
+config.environment['LLVM_SRC_ROOT'] = config.llvm_src_root
 
 # Propagate PYTHON_EXECUTABLE into the environment
 config.environment['PYTHON_EXECUTABLE'] = getattr(config, 'python_executable',
@@ -97,80 +91,23 @@
         config.environment[symbolizer] = os.environ[symbolizer]
 
 # Set up OCAMLPATH to include newly built OCaml libraries.
-llvm_lib_dir = getattr(config, 'llvm_lib_dir', None)
-if llvm_lib_dir is None:
-    if llvm_obj_root is not None:
-        llvm_lib_dir = os.path.join(llvm_obj_root, 'lib')
-
-if llvm_lib_dir is not None:
-    top_ocaml_lib = os.path.join(llvm_lib_dir, 'ocaml')
-    llvm_ocaml_lib = os.path.join(top_ocaml_lib, 'llvm')
-    if llvm_ocaml_lib is not None:
-        ocamlpath = os.path.pathsep.join((llvm_ocaml_lib, top_ocaml_lib))
-        if 'OCAMLPATH' in os.environ:
-            ocamlpath = os.path.pathsep.join((ocamlpath, os.environ['OCAMLPATH']))
-        config.environment['OCAMLPATH'] = ocamlpath
-
-        if 'CAML_LD_LIBRARY_PATH' in os.environ:
-            caml_ld_library_path = os.path.pathsep.join((llvm_ocaml_lib,
-                                        os.environ['CAML_LD_LIBRARY_PATH']))
-            config.environment['CAML_LD_LIBRARY_PATH'] = caml_ld_library_path
-        else:
-            config.environment['CAML_LD_LIBRARY_PATH'] = llvm_ocaml_lib
+top_ocaml_lib = os.path.join(config.llvm_lib_dir, 'ocaml')
+llvm_ocaml_lib = os.path.join(top_ocaml_lib, 'llvm')
+ocamlpath = os.path.pathsep.join((llvm_ocaml_lib, top_ocaml_lib))
+if 'OCAMLPATH' in os.environ:
+    ocamlpath = os.path.pathsep.join((ocamlpath, os.environ['OCAMLPATH']))
+config.environment['OCAMLPATH'] = ocamlpath
+
+if 'CAML_LD_LIBRARY_PATH' in os.environ:
+    caml_ld_library_path = os.path.pathsep.join((llvm_ocaml_lib,
+                                os.environ['CAML_LD_LIBRARY_PATH']))
+    config.environment['CAML_LD_LIBRARY_PATH'] = caml_ld_library_path
+else:
+    config.environment['CAML_LD_LIBRARY_PATH'] = llvm_ocaml_lib
 
 # Set up OCAMLRUNPARAM to enable backtraces in OCaml tests.
 config.environment['OCAMLRUNPARAM'] = 'b'
 
-###
-
-import os
-
-# Check that the object root is known.
-if config.test_exec_root is None:
-    # Otherwise, we haven't loaded the site specific configuration (the user is
-    # probably trying to run on a test file directly, and either the site
-    # configuration hasn't been created by the build system, or we are in an
-    # out-of-tree build situation).
-
-    # Check for 'llvm_site_config' user parameter, and use that if available.
-    site_cfg = lit_config.params.get('llvm_site_config', None)
-    if site_cfg and os.path.exists(site_cfg):
-        lit_config.load_config(config, site_cfg)
-        raise SystemExit
-
-    # Try to detect the situation where we are using an out-of-tree build by
-    # looking for 'llvm-config'.
-    #
-    # FIXME: I debated (i.e., wrote and threw away) adding logic to
-    # automagically generate the lit.site.cfg if we are in some kind of fresh
-    # build situation. This means knowing how to invoke the build system
-    # though, and I decided it was too much magic.
-
-    llvm_config = lit.util.which('llvm-config', config.environment['PATH'])
-    if not llvm_config:
-        lit_config.fatal('No site specific configuration available!')
-
-    # Get the source and object roots.
-    llvm_src_root = subprocess.check_output(['llvm-config', '--src-root']).strip()
-    llvm_obj_root = subprocess.check_output(['llvm-config', '--obj-root']).strip()
-
-    # Validate that we got a tree which points to here.
-    this_src_root = os.path.dirname(config.test_source_root)
-    if os.path.realpath(llvm_src_root) != os.path.realpath(this_src_root):
-        lit_config.fatal('No site specific configuration available!')
-
-    # Check that the site specific configuration exists.
-    site_cfg = os.path.join(llvm_obj_root, 'test', 'lit.site.cfg')
-    if not os.path.exists(site_cfg):
-        lit_config.fatal('No site specific configuration available!')
-
-    # Okay, that worked. Notify the user of the automagic, and reconfigure.
-    lit_config.note('using out-of-tree build at %r' % llvm_obj_root)
-    lit_config.load_config(config, site_cfg)
-    raise SystemExit
-
-###
-
 # Provide the path to asan runtime lib 'libclang_rt.asan_osx_dynamic.dylib' if
 # available. This is darwin specific since it's currently only needed on darwin.
 def get_asan_rtlib():
@@ -231,11 +168,11 @@
 # Support tests for both native and bytecode builds.
 config.substitutions.append( ('%ocamlc',
     "%s ocamlc -cclib -L%s %s" %
-        (config.ocamlfind_executable, llvm_lib_dir, config.ocaml_flags)) )
+        (config.ocamlfind_executable, config.llvm_lib_dir, config.ocaml_flags)) )
 if config.have_ocamlopt:
     config.substitutions.append( ('%ocamlopt',
         "%s ocamlopt -cclib -L%s -cclib -Wl,-rpath,%s %s" %
-            (config.ocamlfind_executable, llvm_lib_dir, llvm_lib_dir, config.ocaml_flags)) )
+            (config.ocamlfind_executable, config.llvm_lib_dir, config.llvm_lib_dir, config.ocaml_flags)) )
 else:
     config.substitutions.append( ('%ocamlopt', "true" ) )
 
@@ -267,7 +204,7 @@
     # llvm-lit "-Dllc=llc -enable-misched -verify-machineinstrs"
     tool_path = lit_config.params.get(tool_name)
     if tool_path is None:
-        tool_path = lit.util.which(tool_name, llvm_tools_dir)
+        tool_path = lit.util.which(tool_name, config.llvm_tools_dir)
         if tool_path is None:
             return tool_name, tool_path, tool_pipe
     if (tool_name == "llc" and
@@ -333,8 +270,8 @@
     tool_name, tool_path, tool_pipe = find_tool_substitution(pattern)
     if not tool_path:
         # Warn, but still provide a substitution.
-        lit_config.note('Did not find ' + tool_name + ' in ' + llvm_tools_dir)
-        tool_path = llvm_tools_dir + '/' + tool_name
+        lit_config.note('Did not find ' + tool_name + ' in ' + config.llvm_tools_dir)
+        tool_path = config.llvm_tools_dir + '/' + tool_name
     config.substitutions.append((pattern, tool_pipe + tool_path))
 
 # For tools that are optional depending on the config, we won't warn
@@ -350,7 +287,7 @@
     tool_name, tool_path, tool_pipe = find_tool_substitution(pattern)
     if not tool_path:
         # Provide a substitution anyway, for the sake of consistent errors.
-        tool_path = llvm_tools_dir + '/' + tool_name
+        tool_path = config.llvm_tools_dir + '/' + tool_name
     config.substitutions.append((pattern, tool_pipe + tool_path))
 
 
@@ -482,11 +419,11 @@
 # Ask llvm-config about assertion mode.
 try:
     llvm_config_cmd = subprocess.Popen(
-        [os.path.join(llvm_tools_dir, 'llvm-config'), '--assertion-mode'],
+        [os.path.join(config.llvm_tools_dir, 'llvm-config'), '--assertion-mode'],
         stdout = subprocess.PIPE,
         env=config.environment)
 except OSError:
-    print("Could not find llvm-config in " + llvm_tools_dir)
+    print("Could not find llvm-config in " + config.llvm_tools_dir)
     exit(42)
 
 if re.search(r'ON', llvm_config_cmd.stdout.read().decode('ascii')):
@@ -538,11 +475,11 @@
 # Ask llvm-config about global-isel.
 try:
     llvm_config_cmd = subprocess.Popen(
-        [os.path.join(llvm_tools_dir, 'llvm-config'), '--has-global-isel'],
+        [os.path.join(config.llvm_tools_dir, 'llvm-config'), '--has-global-isel'],
         stdout = subprocess.PIPE,
         env=config.environment)
 except OSError:
-    print("Could not find llvm-config in " + llvm_tools_dir)
+    print("Could not find llvm-config in " + config.llvm_tools_dir)
     exit(42)
 
 if re.search(r'ON', llvm_config_cmd.stdout.read().decode('ascii')):
Index: llvm/trunk/utils/lit/lit/discovery.py
===================================================================
--- llvm/trunk/utils/lit/lit/discovery.py
+++ llvm/trunk/utils/lit/lit/discovery.py
@@ -40,6 +40,20 @@
             ts, relative = search(parent)
             return (ts, relative + (base,))
 
+        # This is a private builtin parameter which can be used to perform
+        # translation of configuration paths.  Specifically, this parameter
+        # can be set to a dictionary that the discovery process will consult
+        # when it finds a configuration it is about to load.  If the given
+        # path is in the map, the value of that key is a path to the
+        # configuration to load instead.
+        config_map = litConfig.params.get('config_map')
+        if config_map:
+            cfgpath = os.path.normpath(cfgpath)
+            cfgpath = os.path.normcase(cfgpath)
+            target = config_map.get(cfgpath)
+            if target:
+                cfgpath = target
+
         # We found a test suite, create a new config for it and load it.
         if litConfig.debug:
             litConfig.note('loading suite config %r' % cfgpath)
@@ -212,7 +226,7 @@
                 f.close()
         else:
             actual_inputs.append(input)
-                    
+
     # Load the tests from the inputs.
     tests = []
     test_suite_cache = {}
Index: llvm/trunk/utils/lit/tests/lit.cfg
===================================================================
--- llvm/trunk/utils/lit/tests/lit.cfg
+++ llvm/trunk/utils/lit/tests/lit.cfg
@@ -65,7 +65,6 @@
     config.available_features.add('windows')
 
 # Add llvm tools directory if this config is being loaded indirectly
-llvm_tools_dir = getattr(config, 'llvm_tools_dir', None)
-if llvm_tools_dir != None:
-    path = os.path.pathsep.join((llvm_tools_dir, config.environment['PATH']))
+if config.llvm_tools_dir is not None:
+    path = os.path.pathsep.join((config.llvm_tools_dir, config.environment['PATH']))
     config.environment['PATH'] = path
Index: llvm/trunk/utils/llvm-lit/CMakeLists.txt
===================================================================
--- llvm/trunk/utils/llvm-lit/CMakeLists.txt
+++ llvm/trunk/utils/llvm-lit/CMakeLists.txt
@@ -4,6 +4,8 @@
 endif ()
 set(llvm_lit_path ${LLVM_RUNTIME_OUTPUT_INTDIR}/llvm-lit${suffix})
 
+get_property(LLVM_LIT_CONFIG_MAP GLOBAL PROPERTY LLVM_LIT_CONFIG_MAP)
+
 if(NOT "${CMAKE_CFG_INTDIR}" STREQUAL ".")
   foreach(BUILD_MODE ${CMAKE_CONFIGURATION_TYPES})
     string(REPLACE ${CMAKE_CFG_INTDIR} ${BUILD_MODE} bi ${llvm_lit_path})
Index: llvm/trunk/utils/llvm-lit/llvm-lit.in
===================================================================
--- llvm/trunk/utils/llvm-lit/llvm-lit.in
+++ llvm/trunk/utils/llvm-lit/llvm-lit.in
@@ -3,6 +3,15 @@
 import os
 import sys
 
+config_map = {}
+
+def map_config(source_dir, site_config):
+    global config_map
+    source_dir = os.path.normpath(source_dir)
+    source_dir = os.path.normcase(source_dir)
+    site_config = os.path.normpath(site_config)
+    config_map[source_dir] = site_config
+
 # Variables configured at build time.
 llvm_source_root = "@LLVM_SOURCE_DIR@"
 llvm_obj_root = "@LLVM_BINARY_DIR@"
@@ -12,42 +21,11 @@
 
 # Set up some builtin parameters, so that by default the LLVM test suite
 # configuration file knows how to find the object tree.
-builtin_parameters = {
-    'build_mode' : "@BUILD_MODE@",
-    'llvm_site_config' : os.path.join(llvm_obj_root, 'test', 'lit.site.cfg'),
-    'llvm_unit_site_config' : os.path.join(llvm_obj_root, 'test', 'Unit',
-                                           'lit.site.cfg')
-    }
-
-clang_obj_root = os.path.join(llvm_obj_root, 'tools', 'clang')
-
-if os.path.exists(clang_obj_root):
-    builtin_parameters['clang_site_config'] = \
-        os.path.join(clang_obj_root, 'test', 'lit.site.cfg')
-    clang_tools_extra_obj_root = os.path.join(clang_obj_root, 'tools', 'extra')
-    if os.path.exists(clang_tools_extra_obj_root):
-        builtin_parameters['clang_tools_extra_site_config'] = \
-            os.path.join(clang_tools_extra_obj_root, 'test', 'lit.site.cfg')
-
-lld_obj_root = os.path.join(llvm_obj_root, 'tools', 'lld')
-if os.path.exists(lld_obj_root):
-    builtin_parameters['lld_site_config'] = \
-        os.path.join(lld_obj_root, 'test', 'lit.site.cfg')
-
-compilerrt_obj_root = os.path.join(llvm_obj_root, 'projects', 'compiler-rt')
-if os.path.exists(compilerrt_obj_root):
-    builtin_parameters['compilerrt_site_basedir'] = \
-            os.path.join(compilerrt_obj_root, 'test')
-
-libcxx_obj_root = os.path.join(llvm_obj_root, 'projects', 'libcxx')
-if os.path.exists(libcxx_obj_root):
-    builtin_parameters['libcxx_site_config'] = \
-        os.path.join(libcxx_obj_root, 'test', 'lit.site.cfg')
-
-libcxxabi_obj_root = os.path.join(llvm_obj_root, 'projects', 'libcxxabi')
-if os.path.exists(libcxxabi_obj_root):
-    builtin_parameters['libcxxabi_site_config'] = \
-        os.path.join(libcxxabi_obj_root, 'test', 'lit.site.cfg')
+builtin_parameters = { 'build_mode' : "@BUILD_MODE@" }
+
+@LLVM_LIT_CONFIG_MAP@
+
+builtin_parameters['config_map'] = config_map
 
 if __name__=='__main__':
     from lit.main import main
Index: polly/trunk/test/Unit/lit.cfg
===================================================================
--- polly/trunk/test/Unit/lit.cfg
+++ polly/trunk/test/Unit/lit.cfg
@@ -19,14 +19,11 @@
 
 # test_source_root: The root path where tests are located.
 # test_exec_root: The root path where tests should be run.
-polly_obj_root = getattr(config, 'polly_obj_root', None)
-if polly_obj_root is not None:
-    config.test_exec_root = os.path.join(polly_obj_root, 'unittests')
-    config.test_source_root = config.test_exec_root
+config.test_exec_root = os.path.join(config.polly_obj_root, 'unittests')
+config.test_source_root = config.test_exec_root
 
 # testFormat: The test format to use to interpret tests.
-llvm_build_mode = getattr(config, 'llvm_build_mode', "Debug")
-config.test_format = lit.formats.GoogleTest(llvm_build_mode, 'Tests')
+config.test_format = lit.formats.GoogleTest(config.llvm_build_mode, 'Tests')
 
 # Propagate the temp directory. Windows requires this because it uses \Windows\
 # if none of these are present.
@@ -40,55 +37,6 @@
     if symbolizer in os.environ:
         config.environment[symbolizer] = os.environ[symbolizer]
 
-###
-
-# Check that the object root is known.
-if config.test_exec_root is None:
-    # Otherwise, we haven't loaded the site specific configuration (the user is
-    # probably trying to run on a test file directly, and either the site
-    # configuration hasn't been created by the build system, or we are in an
-    # out-of-tree build situation).
-
-    # Check for 'polly_unit_site_config' user parameter, and use that if available.
-    site_cfg = lit_config.params.get('polly_unit_site_config', None)
-    if site_cfg and os.path.exists(site_cfg):
-        lit_config.load_config(config, site_cfg)
-        raise SystemExit
-
-    # Try to detect the situation where we are using an out-of-tree build by
-    # looking for 'llvm-config'.
-    #
-    # FIXME: I debated (i.e., wrote and threw away) adding logic to
-    # automagically generate the lit.site.cfg if we are in some kind of fresh
-    # build situation. This means knowing how to invoke the build system
-    # though, and I decided it was too much magic.
-
-    llvm_config = lit.util.which('llvm-config', config.environment['PATH'])
-    if not llvm_config:
-        lit_config.fatal('No site specific configuration available!')
-
-    # Get the source and object roots.
-    llvm_src_root = lit.util.capture(['llvm-config', '--src-root']).strip()
-    llvm_obj_root = lit.util.capture(['llvm-config', '--obj-root']).strip()
-    polly_src_root = os.path.join(llvm_src_root, "tools", "polly")
-    polly_obj_root = os.path.join(llvm_obj_root, "tools", "polly")
-
-    # Validate that we got a tree which points to here, using the standard
-    # tools/clang layout.
-    this_src_root = os.path.join(os.path.dirname(__file__),'..','..')
-    if os.path.realpath(polly_src_root) != os.path.realpath(this_src_root):
-        lit_config.fatal('No site specific configuration available!')
-
-    # Check that the site specific configuration exists.
-    site_cfg = os.path.join(polly_obj_root, 'test', 'Unit', 'lit.site.cfg')
-    if not os.path.exists(site_cfg):
-        lit_config.fatal('No site specific configuration available!')
-
-    # Okay, that worked. Notify the user of the automagic, and reconfigure.
-    lit_config.note('using out-of-tree build at %r' % polly_obj_root)
-    lit_config.load_config(config, site_cfg)
-    raise SystemExit
-
 shlibpath_var = ''
 if platform.system() == 'Linux':
     shlibpath_var = 'LD_LIBRARY_PATH'
@@ -98,10 +46,7 @@
     shlibpath_var = 'PATH'
 
 # Point the dynamic loader at dynamic libraries in 'lib'.
-llvm_libs_dir = getattr(config, 'llvm_libs_dir', None)
-if not llvm_libs_dir:
-    lit_config.fatal('No LLVM libs dir set!')
-shlibpath = os.path.pathsep.join((llvm_libs_dir,
+shlibpath = os.path.pathsep.join((config.llvm_libs_dir,
                                  config.environment.get(shlibpath_var,'')))
 
 # Win32 seeks DLLs along %PATH%.
Index: polly/trunk/test/lit.cfg
===================================================================
--- polly/trunk/test/lit.cfg
+++ polly/trunk/test/lit.cfg
@@ -27,90 +27,25 @@
 config.test_source_root = os.path.dirname(__file__)
 
 # test_exec_root: The root path where tests should be run.
-polly_obj_root = getattr(config, 'polly_obj_root', None)
-if polly_obj_root is not None:
-    config.test_exec_root = os.path.join(polly_obj_root, 'test')
-
-# Set llvm_{src,obj}_root for use by others.
-config.llvm_src_root = getattr(config, 'llvm_src_root', None)
-config.llvm_obj_root = getattr(config, 'llvm_obj_root', None)
+config.test_exec_root = os.path.join(config.polly_obj_root, 'test')
 
 # Tweak the PATH to include the tools dir and the scripts dir.
-if polly_obj_root is not None:
-    llvm_tools_dir = getattr(config, 'llvm_tools_dir', None)
-    if not llvm_tools_dir:
-        lit_config.fatal('No LLVM tools dir set!')
-    extra_paths = getattr(config, 'extra_paths', [])
-    base_paths = [llvm_tools_dir, config.environment['PATH']]
-    path = os.path.pathsep.join(base_paths + extra_paths)
-    config.environment['PATH'] = path
-
-    llvm_libs_dir = getattr(config, 'llvm_libs_dir', None)
-    if not llvm_libs_dir:
-        lit_config.fatal('No LLVM libs dir set!')
-    path = os.path.pathsep.join((llvm_libs_dir,
-                                 config.environment.get('LD_LIBRARY_PATH','')))
-    config.environment['LD_LIBRARY_PATH'] = path
-
-###
-
-# Check that the object root is known.
-if config.test_exec_root is None:
-    # Otherwise, we haven't loaded the site specific configuration (the user is
-    # probably trying to run on a test file directly, and either the site
-    # configuration hasn't been created by the build system, or we are in an
-    # out-of-tree build situation).
-
-    # Check for 'polly_site_config' user parameter, and use that if available.
-    site_cfg = lit_config.params.get('polly_site_config', None)
-    if site_cfg and os.path.exists(site_cfg):
-        lit_config.load_config(config, site_cfg)
-        raise SystemExit
-
-    # Try to detect the situation where we are using an out-of-tree build by
-    # looking for 'llvm-config'.
-    #
-    # FIXME: I debated (i.e., wrote and threw away) adding logic to
-    # automagically generate the lit.site.cfg if we are in some kind of fresh
-    # build situation. This means knowing how to invoke the build system though,
-    # and I decided it was too much magic. We should solve this by just having
-    # the .cfg files generated during the configuration step.
-
-    llvm_config = lit.util.which('llvm-config', config.environment['PATH'])
-    if not llvm_config:
-        lit_config.fatal('No site specific configuration available!')
-
-    # Get the source and object roots.
-    llvm_src_root = subprocess.check_output(['llvm-config', '--src-root']).decode("utf-8").strip()
-    llvm_obj_root = subprocess.check_output(['llvm-config', '--obj-root']).decode("utf-8").strip()
-
-    polly_src_root = os.path.join(llvm_src_root, "tools", "polly")
-    polly_obj_root = os.path.join(llvm_obj_root, "tools", "polly")
-
-    # Validate that we got a tree which points to here, using the standard
-    # tools/polly layout.
-    this_src_root = os.path.dirname(config.test_source_root)
-    if os.path.realpath(polly_src_root) != os.path.realpath(this_src_root):
-        lit_config.fatal('No site specific configuration available!')
-
-    # Check that the site specific configuration exists.
-    site_cfg = os.path.join(polly_obj_root, 'test', 'lit.site.cfg')
-    if not os.path.exists(site_cfg):
-        lit_config.fatal('No site specific configuration available!')
-
-    # Okay, that worked. Notify the user of the automagic, and reconfigure.
-    lit_config.note('using out-of-tree build at %r' % polly_obj_root)
-    lit_config.load_config(config, site_cfg)
-    raise SystemExit
+base_paths = [config.llvm_tools_dir, config.environment['PATH']]
+path = os.path.pathsep.join(base_paths + config.extra_paths)
+config.environment['PATH'] = path
+
+path = os.path.pathsep.join((config.llvm_libs_dir,
+                              config.environment.get('LD_LIBRARY_PATH','')))
+config.environment['LD_LIBRARY_PATH'] = path
 
 # opt knows whether it is compiled with -DNDEBUG.
 import subprocess
 try:
-    opt_cmd = subprocess.Popen([os.path.join(llvm_tools_dir, 'opt'), '-version'],
+    opt_cmd = subprocess.Popen([os.path.join(config.llvm_tools_dir, 'opt'), '-version'],
                            stdout = subprocess.PIPE,
                            env=config.environment)
 except OSError:
-    print("Could not find opt in " + llvm_tools_dir)
+    print("Could not find opt in " + config.llvm_tools_dir)
     exit(42)
 
 if re.search(r'with assertions', opt_cmd.stdout.read().decode('ascii')):
@@ -118,13 +53,14 @@
 opt_cmd.wait()
 
 try:
-    llvm_config_cmd = subprocess.Popen([os.path.join(llvm_tools_dir,
-                                                     'llvm-config'),
+    llvm_config_cmd = subprocess.Popen([os.path.join(
+                                        config.llvm_tools_dir,
+                                        'llvm-config'),
                                         '--targets-built'],
                                        stdout = subprocess.PIPE,
                                        env=config.environment)
 except OSError:
-    print("Could not find llvm-config in " + llvm_tools_dir)
+    print("Could not find llvm-config in " + config.llvm_tools_dir)
     exit(42)
 
 if re.search(r'NVPTX', llvm_config_cmd.stdout.read().decode('ascii')):