Index: docs/LangRef.rst =================================================================== --- docs/LangRef.rst +++ docs/LangRef.rst @@ -9337,6 +9337,49 @@ See the description for :ref:`llvm.stacksave `. +.. _int_getdynamicareaoffset: + +'``llvm.getdynamicareaoffset``' Intrinsic +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Syntax: +""""""" + +:: + + declare i32 @llvm.getdynamicareaoffset.i32() + declare i64 @llvm.getdynamicareaoffset.i64() + + Overview: + """"""""" + + The '``llvm.getdynamicareaoffset.*``' intrinsic family is used to + get the offset from native stack pointer to the address of the most + recent dynamic alloca on the caller's stack. These intrinsics are + intendend for use in combination with + :ref:`llvm.stackrestore ` to get a + pointer to the most recent dynamic alloca. This is useful, for example, + for AddressSanitizer's stack unpoisoning routines. + +Semantics: +"""""""""" + + These intrinsics return a non-negative integer value that can be used to + get the address of the most recent dynamic alloca, allocated by :ref:`alloca ` + on the caller's stack. In particular, for targets where stack grows downwards, + adding this offset to the native stack pointer would get the address of the most + recent dynamic alloca. For targets where stack grows upwards, the situation is a bit more + complicated, because substracting this value from stack pointer would get the address + one past the end of the most-recent dynamic alloca. + + Although for most targets `llvm.getdynamicareaoffset ` + returns just a zero, for others, such as PowerPC and PowerPC64, it returns a + compile-time known constant value. + + The return value type of :ref:`llvm.getdynamicareaoffset ` + must match generic address space's (address space 0) pointer type for given target, + otherwise LLVM would issue an error on the lowering stage. + '``llvm.prefetch``' Intrinsic ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Index: include/llvm/CodeGen/ISDOpcodes.h =================================================================== --- include/llvm/CodeGen/ISDOpcodes.h +++ include/llvm/CodeGen/ISDOpcodes.h @@ -754,6 +754,12 @@ GC_TRANSITION_START, GC_TRANSITION_END, + /// GET_DYNAMIC_AREA_OFFSET - get offset from native SP to the address of + /// the most recent dynamic alloca. For most targets that would be 0, but + /// for some others (e.g. PowerPC, PowerPC64) that would be compile-time + /// known nonzero constant. The only operand here is the chain. + GET_DYNAMIC_AREA_OFFSET, + /// BUILTIN_OP_END - This must be the last enum value in this list. /// The target-specific pre-isel opcode values start here. BUILTIN_OP_END Index: include/llvm/IR/Intrinsics.td =================================================================== --- include/llvm/IR/Intrinsics.td +++ include/llvm/IR/Intrinsics.td @@ -304,6 +304,8 @@ def int_stackrestore : Intrinsic<[], [llvm_ptr_ty]>, GCCBuiltin<"__builtin_stack_restore">; +def int_getdynamicareaoffset : Intrinsic<[llvm_anyint_ty]>; + // IntrReadWriteArgMem is more pessimistic than strictly necessary for prefetch, // however it does conveniently prevent the prefetch from being reordered // with respect to nearby accesses to the same memory. Index: lib/CodeGen/IntrinsicLowering.cpp =================================================================== --- lib/CodeGen/IntrinsicLowering.cpp +++ lib/CodeGen/IntrinsicLowering.cpp @@ -424,6 +424,13 @@ break; } + case Intrinsic::getdynamicareaoffset: + errs() << "WARNING: this target does not support the custom llvm." + "getdynamicareaoffset. It is being lowered to a constant 0\n"; + // Just lower it to a constant 0 because for most targets + // @llvm.getdynamicareaoffset is lowered to zero. + CI->replaceAllUsesWith(ConstantInt::get(CI->getType(), 0)); + break; case Intrinsic::returnaddress: case Intrinsic::frameaddress: errs() << "WARNING: this target does not support the llvm." Index: lib/CodeGen/SelectionDAG/LegalizeDAG.cpp =================================================================== --- lib/CodeGen/SelectionDAG/LegalizeDAG.cpp +++ lib/CodeGen/SelectionDAG/LegalizeDAG.cpp @@ -1213,6 +1213,10 @@ case ISD::STACKSAVE: Action = TLI.getOperationAction(Node->getOpcode(), MVT::Other); break; + case ISD::GET_DYNAMIC_AREA_OFFSET: + Action = TLI.getOperationAction(Node->getOpcode(), + Node->getValueType(0)); + break; case ISD::VAARG: Action = TLI.getOperationAction(Node->getOpcode(), Node->getValueType(0)); @@ -3295,6 +3299,10 @@ Results.push_back(Node->getOperand(0)); } break; + case ISD::GET_DYNAMIC_AREA_OFFSET: + Results.push_back(DAG.getConstant(0, dl, Node->getValueType(0))); + Results.push_back(Results[0].getValue(0)); + break; case ISD::FCOPYSIGN: Results.push_back(ExpandFCOPYSIGN(Node)); break; Index: lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp =================================================================== --- lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp +++ lib/CodeGen/SelectionDAG/SelectionDAGBuilder.cpp @@ -4933,6 +4933,21 @@ DAG.setRoot(DAG.getNode(ISD::STACKRESTORE, sdl, MVT::Other, getRoot(), Res)); return nullptr; } + case Intrinsic::getdynamicareaoffset: { + SDValue Op = getRoot(); + EVT PtrTy = TLI.getPointerTy(DAG.getDataLayout()); + EVT ResTy = TLI.getValueType(DAG.getDataLayout(), I.getType()); + // Result type for @llvm.getdynamicareaoffset should match PtrTy for + // target. + if (PtrTy != ResTy) + report_fatal_error("Wrong result type for @llvm.getdynamicareaoffset" + " intrinsic!"); + Res = DAG.getNode(ISD::GET_DYNAMIC_AREA_OFFSET, sdl, DAG.getVTList(ResTy), + Op); + DAG.setRoot(Op); + setValue(&I, Res); + return nullptr; + } case Intrinsic::stackprotector: { // Emit code into the DAG to store the stack guard onto the stack. MachineFunction &MF = DAG.getMachineFunction(); Index: lib/CodeGen/SelectionDAG/SelectionDAGDumper.cpp =================================================================== --- lib/CodeGen/SelectionDAG/SelectionDAGDumper.cpp +++ lib/CodeGen/SelectionDAG/SelectionDAGDumper.cpp @@ -310,6 +310,7 @@ case ISD::LIFETIME_END: return "lifetime.end"; case ISD::GC_TRANSITION_START: return "gc_transition.start"; case ISD::GC_TRANSITION_END: return "gc_transition.end"; + case ISD::GET_DYNAMIC_AREA_OFFSET: return "getdynamicareaoffset"; // Bit manipulation case ISD::BITREVERSE: return "bitreverse"; Index: lib/CodeGen/TargetLoweringBase.cpp =================================================================== --- lib/CodeGen/TargetLoweringBase.cpp +++ lib/CodeGen/TargetLoweringBase.cpp @@ -840,6 +840,9 @@ setOperationAction(ISD::SIGN_EXTEND_VECTOR_INREG, VT, Expand); setOperationAction(ISD::ZERO_EXTEND_VECTOR_INREG, VT, Expand); } + + // For most targets @llvm.getdynamicareaoffest just returns 0. + setOperationAction(ISD::GET_DYNAMIC_AREA_OFFSET, VT, Expand); } // Most targets ignore the @llvm.prefetch intrinsic. Index: lib/Target/PowerPC/PPCISelLowering.h =================================================================== --- lib/Target/PowerPC/PPCISelLowering.h +++ lib/Target/PowerPC/PPCISelLowering.h @@ -79,6 +79,11 @@ /// compute an allocation on the stack. DYNALLOC, + /// This instruction is lowered in PPCRegisterInfo::eliminateFrameIndex to + /// compute an offset from native SP to the address of the most recent + /// dynamic alloca. + DYNAREAOFFSET, + /// GlobalBaseReg - On Darwin, this node represents the result of the mflr /// at function entry, used for PIC code. GlobalBaseReg, @@ -728,6 +733,8 @@ const PPCSubtarget &Subtarget) const; SDValue LowerSTACKRESTORE(SDValue Op, SelectionDAG &DAG, const PPCSubtarget &Subtarget) const; + SDValue LowerGET_DYNAMIC_AREA_OFFSET(SDValue Op, SelectionDAG &DAG, + const PPCSubtarget &Subtarget) const; SDValue LowerDYNAMIC_STACKALLOC(SDValue Op, SelectionDAG &DAG, const PPCSubtarget &Subtarget) const; SDValue LowerLOAD(SDValue Op, SelectionDAG &DAG) const; Index: lib/Target/PowerPC/PPCISelLowering.cpp =================================================================== --- lib/Target/PowerPC/PPCISelLowering.cpp +++ lib/Target/PowerPC/PPCISelLowering.cpp @@ -329,6 +329,8 @@ setOperationAction(ISD::STACKRESTORE , MVT::Other, Custom); setOperationAction(ISD::DYNAMIC_STACKALLOC, MVT::i32 , Custom); setOperationAction(ISD::DYNAMIC_STACKALLOC, MVT::i64 , Custom); + setOperationAction(ISD::GET_DYNAMIC_AREA_OFFSET, MVT::i32, Custom); + setOperationAction(ISD::GET_DYNAMIC_AREA_OFFSET, MVT::i64, Custom); // We want to custom lower some of our intrinsics. setOperationAction(ISD::INTRINSIC_WO_CHAIN, MVT::Other, Custom); @@ -998,6 +1000,7 @@ case PPCISD::Lo: return "PPCISD::Lo"; case PPCISD::TOC_ENTRY: return "PPCISD::TOC_ENTRY"; case PPCISD::DYNALLOC: return "PPCISD::DYNALLOC"; + case PPCISD::DYNAREAOFFSET: return "PPCISD::DYNAREAOFFSET"; case PPCISD::GlobalBaseReg: return "PPCISD::GlobalBaseReg"; case PPCISD::SRL: return "PPCISD::SRL"; case PPCISD::SRA: return "PPCISD::SRA"; @@ -5808,6 +5811,22 @@ return DAG.getNode(PPCISD::RET_FLAG, dl, MVT::Other, RetOps); } +SDValue PPCTargetLowering::LowerGET_DYNAMIC_AREA_OFFSET( + SDValue Op, SelectionDAG &DAG, const PPCSubtarget &Subtarget) const { + SDLoc dl(Op); + + // Get the corect type for integers. + EVT IntVT = Op.getValueType(); + + // Get the inputs. + SDValue Chain = Op.getOperand(0); + SDValue FPSIdx = getFramePointerFrameIndex(DAG); + // Build a DYNAREAOFFSET node. + SDValue Ops[2] = {Chain, FPSIdx}; + SDVTList VTs = DAG.getVTList(IntVT); + return DAG.getNode(PPCISD::DYNAREAOFFSET, dl, VTs, Ops); +} + SDValue PPCTargetLowering::LowerSTACKRESTORE(SDValue Op, SelectionDAG &DAG, const PPCSubtarget &Subtarget) const { // When we pop the dynamic allocation we need to restore the SP link. @@ -7938,6 +7957,7 @@ case ISD::STACKRESTORE: return LowerSTACKRESTORE(Op, DAG, Subtarget); case ISD::DYNAMIC_STACKALLOC: return LowerDYNAMIC_STACKALLOC(Op, DAG, Subtarget); + case ISD::GET_DYNAMIC_AREA_OFFSET: return LowerGET_DYNAMIC_AREA_OFFSET(Op, DAG, Subtarget); case ISD::EH_SJLJ_SETJMP: return lowerEH_SJLJ_SETJMP(Op, DAG); case ISD::EH_SJLJ_LONGJMP: return lowerEH_SJLJ_LONGJMP(Op, DAG); Index: lib/Target/PowerPC/PPCInstr64Bit.td =================================================================== --- lib/Target/PowerPC/PPCInstr64Bit.td +++ lib/Target/PowerPC/PPCInstr64Bit.td @@ -369,6 +369,8 @@ def DYNALLOC8 : Pseudo<(outs g8rc:$result), (ins g8rc:$negsize, memri:$fpsi),"#DYNALLOC8", [(set i64:$result, (PPCdynalloc i64:$negsize, iaddr:$fpsi))]>; +def DYNAREAOFFSET8 : Pseudo<(outs i64imm:$result), (ins memri:$fpsi), "#DYNAREAOFFSET8", + [(set i64:$result, (PPCdynareaoffset iaddr:$fpsi))]>; let Defs = [LR8] in { def MTLR8 : XFXForm_7_ext<31, 467, 8, (outs), (ins g8rc:$rS), Index: lib/Target/PowerPC/PPCInstrInfo.td =================================================================== --- lib/Target/PowerPC/PPCInstrInfo.td +++ lib/Target/PowerPC/PPCInstrInfo.td @@ -226,7 +226,9 @@ // Instructions to support dynamic alloca. def SDTDynOp : SDTypeProfile<1, 2, []>; +def SDTDynAreaOp : SDTypeProfile<1, 1, []>; def PPCdynalloc : SDNode<"PPCISD::DYNALLOC", SDTDynOp, [SDNPHasChain]>; +def PPCdynareaoffset : SDNode<"PPCISD::DYNAREAOFFSET", SDTDynAreaOp, [SDNPHasChain]>; //===----------------------------------------------------------------------===// // PowerPC specific transformation functions and pattern fragments. @@ -1029,6 +1031,8 @@ def DYNALLOC : Pseudo<(outs gprc:$result), (ins gprc:$negsize, memri:$fpsi), "#DYNALLOC", [(set i32:$result, (PPCdynalloc i32:$negsize, iaddr:$fpsi))]>; +def DYNAREAOFFSET : Pseudo<(outs i32imm:$result), (ins memri:$fpsi), "#DYNAREAOFFSET", + [(set i32:$result, (PPCdynareaoffset iaddr:$fpsi))]>; // SELECT_CC_* - Used to implement the SELECT_CC DAG operation. Expanded after // instruction selection into a branch sequence. Index: lib/Target/PowerPC/PPCRegisterInfo.h =================================================================== --- lib/Target/PowerPC/PPCRegisterInfo.h +++ lib/Target/PowerPC/PPCRegisterInfo.h @@ -101,6 +101,7 @@ } void lowerDynamicAlloc(MachineBasicBlock::iterator II) const; + void lowerDynamicAreaOffset(MachineBasicBlock::iterator II) const; void lowerCRSpilling(MachineBasicBlock::iterator II, unsigned FrameIndex) const; void lowerCRRestore(MachineBasicBlock::iterator II, Index: lib/Target/PowerPC/PPCRegisterInfo.cpp =================================================================== --- lib/Target/PowerPC/PPCRegisterInfo.cpp +++ lib/Target/PowerPC/PPCRegisterInfo.cpp @@ -430,6 +430,27 @@ MBB.erase(II); } +void PPCRegisterInfo::lowerDynamicAreaOffset( + MachineBasicBlock::iterator II) const { + // Get the instruction. + MachineInstr &MI = *II; + // Get the instruction's basic block. + MachineBasicBlock &MBB = *MI.getParent(); + // Get the basic block's function. + MachineFunction &MF = *MBB.getParent(); + // Get the frame info. + MachineFrameInfo *MFI = MF.getFrameInfo(); + const PPCSubtarget &Subtarget = MF.getSubtarget(); + // Get the instruction info. + const TargetInstrInfo &TII = *Subtarget.getInstrInfo(); + + unsigned maxCallFrameSize = MFI->getMaxCallFrameSize(); + DebugLoc dl = MI.getDebugLoc(); + BuildMI(MBB, II, dl, TII.get(PPC::LI), MI.getOperand(0).getReg()) + .addImm(maxCallFrameSize); + MBB.erase(II); +} + /// lowerCRSpilling - Generate the code for spilling a CR register. Instead of /// reserving a whole register (R0), we scrounge for one here. This generates /// code like this: @@ -754,6 +775,11 @@ // Get the instruction opcode. unsigned OpC = MI.getOpcode(); + if ((OpC == PPC::DYNAREAOFFSET || OpC == PPC::DYNAREAOFFSET8)) { + lowerDynamicAreaOffset(II); + return; + } + // Special case for dynamic alloca. if (FPSI && FrameIndex == FPSI && (OpC == PPC::DYNALLOC || OpC == PPC::DYNALLOC8)) { Index: test/CodeGen/PowerPC/dyn-alloca-offset.ll =================================================================== --- /dev/null +++ test/CodeGen/PowerPC/dyn-alloca-offset.ll @@ -0,0 +1,21 @@ +; RUN: llc -mtriple=powerpc64-unknown-linux-gnu -mcpu=pwr7 < %s | FileCheck %s +target datalayout = "E-p:64:64:64-i1:8:8-i8:8:8-i16:16:16-i32:32:32-i64:64:64-f32:32:32-f64:64:64-f128:128:128-v128:128:128-n32:64" +target triple = "powerpc64-unknown-linux-gnu" + +declare i64 @llvm.getdynamicareaoffset.i64() + +declare i64 @bar(i64) + +attributes #0 = { nounwind } + +; Function Attrs: nounwind sanitize_address uwtable +define signext i64 @foo(i32 signext %N, i32 signext %M) #0 { + %1 = alloca i64, align 32 + %getdynamicareaoffset1 = call i64 @llvm.getdynamicareaoffset.i64() + %2 = call i64 @bar(i64 %getdynamicareaoffset1) + ret i64 %2 + +; CHECK-DAG: li [[REG1:[0-9]+]], 112 +; CHECK: blr + +}