diff --git a/llvm/lib/Target/X86/X86TargetTransformInfo.cpp b/llvm/lib/Target/X86/X86TargetTransformInfo.cpp --- a/llvm/lib/Target/X86/X86TargetTransformInfo.cpp +++ b/llvm/lib/Target/X86/X86TargetTransformInfo.cpp @@ -57,6 +57,43 @@ // //===----------------------------------------------------------------------===// +// Helper struct to store/access costs for each cost kind. +// TODO: Move this to allow other targets to use it? +struct CostKindCosts { + unsigned RecipThroughputCost; + unsigned LatencyCost; + unsigned CodeSizeCost; + unsigned SizeAndLatencyCost; + + CostKindCosts(unsigned RecipThroughput = ~0U, unsigned Latency = ~0U, + unsigned CodeSize = ~0U, unsigned SizeAndLatency = ~0U) + : RecipThroughputCost(RecipThroughput), LatencyCost(Latency), + CodeSizeCost(CodeSize), SizeAndLatencyCost(SizeAndLatency) {} + + llvm::Optional + operator[](TargetTransformInfo::TargetCostKind Kind) const { + unsigned Cost = ~0U; + switch (Kind) { + case TargetTransformInfo::TCK_RecipThroughput: + Cost = RecipThroughputCost; + break; + case TargetTransformInfo::TCK_Latency: + Cost = LatencyCost; + break; + case TargetTransformInfo::TCK_CodeSize: + Cost = CodeSizeCost; + break; + case TargetTransformInfo::TCK_SizeAndLatency: + Cost = SizeAndLatencyCost; + break; + } + if (Cost == ~0U) + return None; + return Cost; + } +}; +using CostKindTblEntry = CostTblEntryT; + TargetTransformInfo::PopcntSupportKind X86TTIImpl::getPopcntSupport(unsigned TyWidth) { assert(isPowerOf2_32(TyWidth) && "Ty width must be power of 2"); @@ -2621,16 +2658,6 @@ CmpInst::Predicate VecPred, TTI::TargetCostKind CostKind, const Instruction *I) { - // Assume a 3cy latency for fp select ops. - if (CostKind == TTI::TCK_Latency && Opcode == Instruction::Select) - if (ValTy->getScalarType()->isFloatingPointTy()) - return 3; - - // TODO: Handle other cost kinds. - if (CostKind != TTI::TCK_RecipThroughput) - return BaseT::getCmpSelInstrCost(Opcode, ValTy, CondTy, VecPred, CostKind, - I); - // Legalize the type. std::pair LT = getTypeLegalizationCost(ValTy); @@ -2693,166 +2720,180 @@ } } - static const CostTblEntry SLMCostTbl[] = { + static const CostKindTblEntry SLMCostTbl[] = { // slm pcmpeq/pcmpgt throughput is 2 - { ISD::SETCC, MVT::v2i64, 2 }, + { ISD::SETCC, MVT::v2i64, { 2 } }, // slm pblendvb/blendvpd/blendvps throughput is 4 - { ISD::SELECT, MVT::v2f64, 4 }, // vblendvpd - { ISD::SELECT, MVT::v4f32, 4 }, // vblendvps - { ISD::SELECT, MVT::v2i64, 4 }, // pblendvb - { ISD::SELECT, MVT::v8i32, 4 }, // pblendvb - { ISD::SELECT, MVT::v8i16, 4 }, // pblendvb - { ISD::SELECT, MVT::v16i8, 4 }, // pblendvb + { ISD::SELECT, MVT::v2f64, { 4, 4, 1, 3 } }, // vblendvpd + { ISD::SELECT, MVT::v4f32, { 4, 4, 1, 3 } }, // vblendvps + { ISD::SELECT, MVT::v2i64, { 4, 4, 1, 3 } }, // pblendvb + { ISD::SELECT, MVT::v8i32, { 4, 4, 1, 3 } }, // pblendvb + { ISD::SELECT, MVT::v8i16, { 4, 4, 1, 3 } }, // pblendvb + { ISD::SELECT, MVT::v16i8, { 4, 4, 1, 3 } }, // pblendvb }; - static const CostTblEntry AVX512BWCostTbl[] = { - { ISD::SETCC, MVT::v32i16, 1 }, - { ISD::SETCC, MVT::v64i8, 1 }, + static const CostKindTblEntry AVX512BWCostTbl[] = { + { ISD::SETCC, MVT::v32i16, { 1 } }, + { ISD::SETCC, MVT::v64i8, { 1 } }, - { ISD::SELECT, MVT::v32i16, 1 }, - { ISD::SELECT, MVT::v64i8, 1 }, + { ISD::SELECT, MVT::v32i16, { 1, 1, 1, 1 } }, + { ISD::SELECT, MVT::v64i8, { 1, 1, 1, 1 } }, }; - static const CostTblEntry AVX512CostTbl[] = { - { ISD::SETCC, MVT::v8i64, 1 }, - { ISD::SETCC, MVT::v16i32, 1 }, - { ISD::SETCC, MVT::v8f64, 1 }, - { ISD::SETCC, MVT::v16f32, 1 }, - - { ISD::SELECT, MVT::v8i64, 1 }, - { ISD::SELECT, MVT::v4i64, 1 }, - { ISD::SELECT, MVT::v2i64, 1 }, - { ISD::SELECT, MVT::v16i32, 1 }, - { ISD::SELECT, MVT::v8i32, 1 }, - { ISD::SELECT, MVT::v4i32, 1 }, - { ISD::SELECT, MVT::v8f64, 1 }, - { ISD::SELECT, MVT::v4f64, 1 }, - { ISD::SELECT, MVT::v2f64, 1 }, - { ISD::SELECT, MVT::f64, 1 }, - { ISD::SELECT, MVT::v16f32, 1 }, - { ISD::SELECT, MVT::v8f32 , 1 }, - { ISD::SELECT, MVT::v4f32, 1 }, - { ISD::SELECT, MVT::f32 , 1 }, - - { ISD::SETCC, MVT::v32i16, 2 }, // FIXME: should probably be 4 - { ISD::SETCC, MVT::v64i8, 2 }, // FIXME: should probably be 4 - - { ISD::SELECT, MVT::v32i16, 2 }, - { ISD::SELECT, MVT::v16i16, 1 }, - { ISD::SELECT, MVT::v8i16, 1 }, - { ISD::SELECT, MVT::v64i8, 2 }, - { ISD::SELECT, MVT::v32i8, 1 }, - { ISD::SELECT, MVT::v16i8, 1 }, + static const CostKindTblEntry AVX512CostTbl[] = { + { ISD::SETCC, MVT::v8i64, { 1 } }, + { ISD::SETCC, MVT::v16i32, { 1 } }, + { ISD::SETCC, MVT::v8f64, { 1 } }, + { ISD::SETCC, MVT::v16f32, { 1 } }, + + { ISD::SELECT, MVT::v8i64, { 1, 1, 1, 1 } }, + { ISD::SELECT, MVT::v4i64, { 1, 1, 1, 1 } }, + { ISD::SELECT, MVT::v2i64, { 1, 1, 1, 1 } }, + { ISD::SELECT, MVT::v16i32, { 1, 1, 1, 1 } }, + { ISD::SELECT, MVT::v8i32, { 1, 1, 1, 1 } }, + { ISD::SELECT, MVT::v4i32, { 1, 1, 1, 1 } }, + { ISD::SELECT, MVT::v8f64, { 1, 1, 1, 1 } }, + { ISD::SELECT, MVT::v4f64, { 1, 1, 1, 1 } }, + { ISD::SELECT, MVT::v2f64, { 1, 1, 1, 1 } }, + { ISD::SELECT, MVT::f64, { 1, 1, 1, 1 } }, + { ISD::SELECT, MVT::v16f32, { 1, 1, 1, 1 } }, + { ISD::SELECT, MVT::v8f32 , { 1, 1, 1, 1 } }, + { ISD::SELECT, MVT::v4f32, { 1, 1, 1, 1 } }, + { ISD::SELECT, MVT::f32 , { 1, 1, 1, 1 } }, + + { ISD::SETCC, MVT::v32i16, { 2 } }, // FIXME: should probably be 4 + { ISD::SETCC, MVT::v64i8, { 2 } }, // FIXME: should probably be 4 + + { ISD::SELECT, MVT::v32i16, { 2, 2, 4, 4 } }, + { ISD::SELECT, MVT::v16i16, { 1, 1, 1, 1 } }, + { ISD::SELECT, MVT::v8i16, { 1, 1, 1, 1 } }, + { ISD::SELECT, MVT::v64i8, { 2, 2, 4, 4 } }, + { ISD::SELECT, MVT::v32i8, { 1, 1, 1, 1 } }, + { ISD::SELECT, MVT::v16i8, { 1, 1, 1, 1 } }, }; - static const CostTblEntry AVX2CostTbl[] = { - { ISD::SETCC, MVT::v4i64, 1 }, - { ISD::SETCC, MVT::v8i32, 1 }, - { ISD::SETCC, MVT::v16i16, 1 }, - { ISD::SETCC, MVT::v32i8, 1 }, - - { ISD::SELECT, MVT::v4f64, 2 }, // vblendvpd - { ISD::SELECT, MVT::v8f32, 2 }, // vblendvps - { ISD::SELECT, MVT::v4i64, 2 }, // pblendvb - { ISD::SELECT, MVT::v8i32, 2 }, // pblendvb - { ISD::SELECT, MVT::v16i16, 2 }, // pblendvb - { ISD::SELECT, MVT::v32i8, 2 }, // pblendvb + static const CostKindTblEntry AVX2CostTbl[] = { + { ISD::SETCC, MVT::v4i64, { 1 } }, + { ISD::SETCC, MVT::v8i32, { 1 } }, + { ISD::SETCC, MVT::v16i16, { 1 } }, + { ISD::SETCC, MVT::v32i8, { 1 } }, + + { ISD::SELECT, MVT::v4f64, { 2, 2, 1, 2 } }, // vblendvpd + { ISD::SELECT, MVT::v8f32, { 2, 2, 1, 2 } }, // vblendvps + { ISD::SELECT, MVT::v4i64, { 2, 2, 1, 2 } }, // pblendvb + { ISD::SELECT, MVT::v8i32, { 2, 2, 1, 2 } }, // pblendvb + { ISD::SELECT, MVT::v16i16, { 2, 2, 1, 2 } }, // pblendvb + { ISD::SELECT, MVT::v32i8, { 2, 2, 1, 2 } }, // pblendvb }; - static const CostTblEntry AVX1CostTbl[] = { - { ISD::SETCC, MVT::v4f64, 1 }, - { ISD::SETCC, MVT::v8f32, 1 }, + static const CostKindTblEntry AVX1CostTbl[] = { + { ISD::SETCC, MVT::v4f64, { 1 } }, + { ISD::SETCC, MVT::v8f32, { 1 } }, // AVX1 does not support 8-wide integer compare. - { ISD::SETCC, MVT::v4i64, 4 }, - { ISD::SETCC, MVT::v8i32, 4 }, - { ISD::SETCC, MVT::v16i16, 4 }, - { ISD::SETCC, MVT::v32i8, 4 }, - - { ISD::SELECT, MVT::v4f64, 3 }, // vblendvpd - { ISD::SELECT, MVT::v8f32, 3 }, // vblendvps - { ISD::SELECT, MVT::v4i64, 3 }, // vblendvpd - { ISD::SELECT, MVT::v8i32, 3 }, // vblendvps - { ISD::SELECT, MVT::v16i16, 3 }, // vandps + vandnps + vorps - { ISD::SELECT, MVT::v32i8, 3 }, // vandps + vandnps + vorps + { ISD::SETCC, MVT::v4i64, { 4 } }, + { ISD::SETCC, MVT::v8i32, { 4 } }, + { ISD::SETCC, MVT::v16i16, { 4 } }, + { ISD::SETCC, MVT::v32i8, { 4 } }, + + { ISD::SELECT, MVT::v4f64, { 3, 3, 1, 2 } }, // vblendvpd + { ISD::SELECT, MVT::v8f32, { 3, 3, 1, 2 } }, // vblendvps + { ISD::SELECT, MVT::v4i64, { 3, 3, 1, 2 } }, // vblendvpd + { ISD::SELECT, MVT::v8i32, { 3, 3, 1, 2 } }, // vblendvps + { ISD::SELECT, MVT::v16i16, { 3, 3, 3, 3 } }, // vandps + vandnps + vorps + { ISD::SELECT, MVT::v32i8, { 3, 3, 3, 3 } }, // vandps + vandnps + vorps }; - static const CostTblEntry SSE42CostTbl[] = { - { ISD::SETCC, MVT::v2i64, 1 }, + static const CostKindTblEntry SSE42CostTbl[] = { + { ISD::SETCC, MVT::v2i64, { 1 } }, }; - static const CostTblEntry SSE41CostTbl[] = { - { ISD::SETCC, MVT::v2f64, 1 }, - { ISD::SETCC, MVT::v4f32, 1 }, - - { ISD::SELECT, MVT::v2f64, 2 }, // blendvpd - { ISD::SELECT, MVT::f64, 2 }, // blendvpd - { ISD::SELECT, MVT::v4f32, 2 }, // blendvps - { ISD::SELECT, MVT::f32 , 2 }, // blendvps - { ISD::SELECT, MVT::v2i64, 2 }, // pblendvb - { ISD::SELECT, MVT::v4i32, 2 }, // pblendvb - { ISD::SELECT, MVT::v8i16, 2 }, // pblendvb - { ISD::SELECT, MVT::v16i8, 2 }, // pblendvb + static const CostKindTblEntry SSE41CostTbl[] = { + { ISD::SETCC, MVT::v2f64, { 1 } }, + { ISD::SETCC, MVT::v4f32, { 1 } }, + + { ISD::SELECT, MVT::v2f64, { 2, 2, 1, 2 } }, // blendvpd + { ISD::SELECT, MVT::f64, { 2, 2, 1, 2 } }, // blendvpd + { ISD::SELECT, MVT::v4f32, { 2, 2, 1, 2 } }, // blendvps + { ISD::SELECT, MVT::f32 , { 2, 2, 1, 2 } }, // blendvps + { ISD::SELECT, MVT::v2i64, { 2, 2, 1, 2 } }, // pblendvb + { ISD::SELECT, MVT::v4i32, { 2, 2, 1, 2 } }, // pblendvb + { ISD::SELECT, MVT::v8i16, { 2, 2, 1, 2 } }, // pblendvb + { ISD::SELECT, MVT::v16i8, { 2, 2, 1, 2 } }, // pblendvb }; - static const CostTblEntry SSE2CostTbl[] = { - { ISD::SETCC, MVT::v2f64, 2 }, - { ISD::SETCC, MVT::f64, 1 }, - { ISD::SETCC, MVT::v2i64, 5 }, // pcmpeqd/pcmpgtd expansion - { ISD::SETCC, MVT::v4i32, 1 }, - { ISD::SETCC, MVT::v8i16, 1 }, - { ISD::SETCC, MVT::v16i8, 1 }, - - { ISD::SELECT, MVT::v2f64, 2 }, // andpd + andnpd + orpd - { ISD::SELECT, MVT::f64, 2 }, // andpd + andnpd + orpd - { ISD::SELECT, MVT::v2i64, 2 }, // pand + pandn + por - { ISD::SELECT, MVT::v4i32, 2 }, // pand + pandn + por - { ISD::SELECT, MVT::v8i16, 2 }, // pand + pandn + por - { ISD::SELECT, MVT::v16i8, 2 }, // pand + pandn + por + static const CostKindTblEntry SSE2CostTbl[] = { + { ISD::SETCC, MVT::v2f64, { 2 } }, + { ISD::SETCC, MVT::f64, { 1 } }, + { ISD::SETCC, MVT::v2i64, { 5 } }, // pcmpeqd/pcmpgtd expansion + { ISD::SETCC, MVT::v4i32, { 1 } }, + { ISD::SETCC, MVT::v8i16, { 1 } }, + { ISD::SETCC, MVT::v16i8, { 1 } }, + + { ISD::SELECT, MVT::v2f64, { 2, 2, 3, 3 } }, // andpd + andnpd + orpd + { ISD::SELECT, MVT::f64, { 2, 2, 3, 3 } }, // andpd + andnpd + orpd + { ISD::SELECT, MVT::v2i64, { 2, 2, 3, 3 } }, // pand + pandn + por + { ISD::SELECT, MVT::v4i32, { 2, 2, 3, 3 } }, // pand + pandn + por + { ISD::SELECT, MVT::v8i16, { 2, 2, 3, 3 } }, // pand + pandn + por + { ISD::SELECT, MVT::v16i8, { 2, 2, 3, 3 } }, // pand + pandn + por }; - static const CostTblEntry SSE1CostTbl[] = { - { ISD::SETCC, MVT::v4f32, 2 }, - { ISD::SETCC, MVT::f32, 1 }, + static const CostKindTblEntry SSE1CostTbl[] = { + { ISD::SETCC, MVT::v4f32, { 2 } }, + { ISD::SETCC, MVT::f32, { 1 } }, - { ISD::SELECT, MVT::v4f32, 2 }, // andps + andnps + orps - { ISD::SELECT, MVT::f32, 2 }, // andps + andnps + orps + { ISD::SELECT, MVT::v4f32, { 2, 2, 3, 3 } }, // andps + andnps + orps + { ISD::SELECT, MVT::f32, { 2, 2, 3, 3 } }, // andps + andnps + orps }; if (ST->useSLMArithCosts()) if (const auto *Entry = CostTableLookup(SLMCostTbl, ISD, MTy)) - return LT.first * (ExtraCost + Entry->Cost); + if (auto KindCost = Entry->Cost[CostKind]) + return LT.first * (ExtraCost + KindCost.value()); if (ST->hasBWI()) if (const auto *Entry = CostTableLookup(AVX512BWCostTbl, ISD, MTy)) - return LT.first * (ExtraCost + Entry->Cost); + if (auto KindCost = Entry->Cost[CostKind]) + return LT.first * (ExtraCost + KindCost.value()); if (ST->hasAVX512()) if (const auto *Entry = CostTableLookup(AVX512CostTbl, ISD, MTy)) - return LT.first * (ExtraCost + Entry->Cost); + if (auto KindCost = Entry->Cost[CostKind]) + return LT.first * (ExtraCost + KindCost.value()); if (ST->hasAVX2()) if (const auto *Entry = CostTableLookup(AVX2CostTbl, ISD, MTy)) - return LT.first * (ExtraCost + Entry->Cost); + if (auto KindCost = Entry->Cost[CostKind]) + return LT.first * (ExtraCost + KindCost.value()); if (ST->hasAVX()) if (const auto *Entry = CostTableLookup(AVX1CostTbl, ISD, MTy)) - return LT.first * (ExtraCost + Entry->Cost); + if (auto KindCost = Entry->Cost[CostKind]) + return LT.first * (ExtraCost + KindCost.value()); if (ST->hasSSE42()) if (const auto *Entry = CostTableLookup(SSE42CostTbl, ISD, MTy)) - return LT.first * (ExtraCost + Entry->Cost); + if (auto KindCost = Entry->Cost[CostKind]) + return LT.first * (ExtraCost + KindCost.value()); if (ST->hasSSE41()) if (const auto *Entry = CostTableLookup(SSE41CostTbl, ISD, MTy)) - return LT.first * (ExtraCost + Entry->Cost); + if (auto KindCost = Entry->Cost[CostKind]) + return LT.first * (ExtraCost + KindCost.value()); if (ST->hasSSE2()) if (const auto *Entry = CostTableLookup(SSE2CostTbl, ISD, MTy)) - return LT.first * (ExtraCost + Entry->Cost); + if (auto KindCost = Entry->Cost[CostKind]) + return LT.first * (ExtraCost + KindCost.value()); if (ST->hasSSE1()) if (const auto *Entry = CostTableLookup(SSE1CostTbl, ISD, MTy)) - return LT.first * (ExtraCost + Entry->Cost); + if (auto KindCost = Entry->Cost[CostKind]) + return LT.first * (ExtraCost + KindCost.value()); + + // Assume a 3cy latency for fp select ops. + if (CostKind == TTI::TCK_Latency && Opcode == Instruction::Select) + if (ValTy->getScalarType()->isFloatingPointTy()) + return 3; return BaseT::getCmpSelInstrCost(Opcode, ValTy, CondTy, VecPred, CostKind, I); } diff --git a/llvm/test/Analysis/CostModel/X86/intrinsic-cost-kinds.ll b/llvm/test/Analysis/CostModel/X86/intrinsic-cost-kinds.ll --- a/llvm/test/Analysis/CostModel/X86/intrinsic-cost-kinds.ll +++ b/llvm/test/Analysis/CostModel/X86/intrinsic-cost-kinds.ll @@ -82,17 +82,17 @@ ; ; LATE-LABEL: 'smax' ; LATE-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %s = call i32 @llvm.smax.i32(i32 %a, i32 %b) -; LATE-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %v = call <16 x i32> @llvm.smax.v16i32(<16 x i32> %va, <16 x i32> %vb) +; LATE-NEXT: Cost Model: Found an estimated cost of 9 for instruction: %v = call <16 x i32> @llvm.smax.v16i32(<16 x i32> %va, <16 x i32> %vb) ; LATE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret void ; ; SIZE-LABEL: 'smax' ; SIZE-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %s = call i32 @llvm.smax.i32(i32 %a, i32 %b) -; SIZE-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %v = call <16 x i32> @llvm.smax.v16i32(<16 x i32> %va, <16 x i32> %vb) +; SIZE-NEXT: Cost Model: Found an estimated cost of 13 for instruction: %v = call <16 x i32> @llvm.smax.v16i32(<16 x i32> %va, <16 x i32> %vb) ; SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret void ; ; SIZE_LATE-LABEL: 'smax' ; SIZE_LATE-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %s = call i32 @llvm.smax.i32(i32 %a, i32 %b) -; SIZE_LATE-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %v = call <16 x i32> @llvm.smax.v16i32(<16 x i32> %va, <16 x i32> %vb) +; SIZE_LATE-NEXT: Cost Model: Found an estimated cost of 13 for instruction: %v = call <16 x i32> @llvm.smax.v16i32(<16 x i32> %va, <16 x i32> %vb) ; SIZE_LATE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret void ; %s = call i32 @llvm.smax.i32(i32 %a, i32 %b) @@ -290,17 +290,17 @@ ; ; LATE-LABEL: 'fshl' ; LATE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %s = call i32 @llvm.fshl.i32(i32 %a, i32 %b, i32 %c) -; LATE-NEXT: Cost Model: Found an estimated cost of 7 for instruction: %v = call <16 x i32> @llvm.fshl.v16i32(<16 x i32> %va, <16 x i32> %vb, <16 x i32> %vc) +; LATE-NEXT: Cost Model: Found an estimated cost of 14 for instruction: %v = call <16 x i32> @llvm.fshl.v16i32(<16 x i32> %va, <16 x i32> %vb, <16 x i32> %vc) ; LATE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret void ; ; SIZE-LABEL: 'fshl' ; SIZE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %s = call i32 @llvm.fshl.i32(i32 %a, i32 %b, i32 %c) -; SIZE-NEXT: Cost Model: Found an estimated cost of 7 for instruction: %v = call <16 x i32> @llvm.fshl.v16i32(<16 x i32> %va, <16 x i32> %vb, <16 x i32> %vc) +; SIZE-NEXT: Cost Model: Found an estimated cost of 18 for instruction: %v = call <16 x i32> @llvm.fshl.v16i32(<16 x i32> %va, <16 x i32> %vb, <16 x i32> %vc) ; SIZE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret void ; ; SIZE_LATE-LABEL: 'fshl' ; SIZE_LATE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %s = call i32 @llvm.fshl.i32(i32 %a, i32 %b, i32 %c) -; SIZE_LATE-NEXT: Cost Model: Found an estimated cost of 7 for instruction: %v = call <16 x i32> @llvm.fshl.v16i32(<16 x i32> %va, <16 x i32> %vb, <16 x i32> %vc) +; SIZE_LATE-NEXT: Cost Model: Found an estimated cost of 18 for instruction: %v = call <16 x i32> @llvm.fshl.v16i32(<16 x i32> %va, <16 x i32> %vb, <16 x i32> %vc) ; SIZE_LATE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret void ; %s = call i32 @llvm.fshl.i32(i32 %a, i32 %b, i32 %c) diff --git a/llvm/test/Analysis/CostModel/X86/select-codesize.ll b/llvm/test/Analysis/CostModel/X86/select-codesize.ll --- a/llvm/test/Analysis/CostModel/X86/select-codesize.ll +++ b/llvm/test/Analysis/CostModel/X86/select-codesize.ll @@ -1,36 +1,131 @@ ; NOTE: Assertions have been autogenerated by utils/update_analyze_test_checks.py -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=code-size -mtriple=x86_64-- -mattr=+sse2 | FileCheck %s -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=code-size -mtriple=x86_64-- -mattr=+sse4.1 | FileCheck %s -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=code-size -mtriple=x86_64-- -mattr=+avx | FileCheck %s -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=code-size -mtriple=x86_64-- -mattr=+avx2 | FileCheck %s -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=code-size -mtriple=x86_64-- -mattr=+avx512f,+avx512vl | FileCheck %s -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=code-size -mtriple=x86_64-- -mattr=+avx512bw,+avx512vl | FileCheck %s +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=code-size -mtriple=x86_64-- -mattr=+sse2 | FileCheck %s -check-prefixes=SSE2 +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=code-size -mtriple=x86_64-- -mattr=+sse4.1 | FileCheck %s -check-prefixes=SSE4 +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=code-size -mtriple=x86_64-- -mattr=+avx | FileCheck %s -check-prefixes=AVX,AVX1 +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=code-size -mtriple=x86_64-- -mattr=+avx2 | FileCheck %s -check-prefixes=AVX,AVX2 +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=code-size -mtriple=x86_64-- -mattr=+avx512f,+avx512vl | FileCheck %s -check-prefixes=AVX512,AVX512F +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=code-size -mtriple=x86_64-- -mattr=+avx512bw,+avx512vl | FileCheck %s -check-prefixes=AVX512,AVX512BW ; -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=code-size -mtriple=x86_64-- -mcpu=slm | FileCheck %s -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=code-size -mtriple=x86_64-- -mcpu=goldmont | FileCheck %s -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=code-size -mtriple=x86_64-- -mcpu=btver2 | FileCheck %s +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=code-size -mtriple=x86_64-- -mcpu=slm | FileCheck %s --check-prefixes=SSE4 +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=code-size -mtriple=x86_64-- -mcpu=goldmont | FileCheck %s --check-prefixes=SSE4 +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=code-size -mtriple=x86_64-- -mcpu=btver2 | FileCheck %s --check-prefixes=AVX,AVX1 ; Verify the cost of vector select instructions. define i32 @test_select() { -; CHECK-LABEL: 'test_select' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I64 = select i1 undef, i64 undef, i64 undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4I64 = select <4 x i1> undef, <4 x i64> undef, <4 x i64> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I64 = select <8 x i1> undef, <8 x i64> undef, <8 x i64> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I32 = select i1 undef, i32 undef, i32 undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4I32 = select <4 x i1> undef, <4 x i32> undef, <4 x i32> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I32 = select <8 x i1> undef, <8 x i32> undef, <8 x i32> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I32 = select <16 x i1> undef, <16 x i32> undef, <16 x i32> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I16 = select i1 undef, i16 undef, i16 undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I16 = select <8 x i1> undef, <8 x i16> undef, <8 x i16> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I16 = select <16 x i1> undef, <16 x i16> undef, <16 x i16> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V32I16 = select <32 x i1> undef, <32 x i16> undef, <32 x i16> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I8 = select i1 undef, i8 undef, i8 undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I8 = select <16 x i1> undef, <16 x i8> undef, <16 x i8> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V32I8 = select <32 x i1> undef, <32 x i8> undef, <32 x i8> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V64I8 = select <64 x i1> undef, <64 x i8> undef, <64 x i8> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; SSE2-LABEL: 'test_select' +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I64 = select i1 undef, i64 undef, i64 undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V4I64 = select <4 x i1> undef, <4 x i64> undef, <4 x i64> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 12 for instruction: %V8I64 = select <8 x i1> undef, <8 x i64> undef, <8 x i64> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I32 = select i1 undef, i32 undef, i32 undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V4I32 = select <4 x i1> undef, <4 x i32> undef, <4 x i32> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V8I32 = select <8 x i1> undef, <8 x i32> undef, <8 x i32> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 12 for instruction: %V16I32 = select <16 x i1> undef, <16 x i32> undef, <16 x i32> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I16 = select i1 undef, i16 undef, i16 undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V8I16 = select <8 x i1> undef, <8 x i16> undef, <8 x i16> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V16I16 = select <16 x i1> undef, <16 x i16> undef, <16 x i16> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 12 for instruction: %V32I16 = select <32 x i1> undef, <32 x i16> undef, <32 x i16> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I8 = select i1 undef, i8 undef, i8 undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V16I8 = select <16 x i1> undef, <16 x i8> undef, <16 x i8> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V32I8 = select <32 x i1> undef, <32 x i8> undef, <32 x i8> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 12 for instruction: %V64I8 = select <64 x i1> undef, <64 x i8> undef, <64 x i8> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; SSE4-LABEL: 'test_select' +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I64 = select i1 undef, i64 undef, i64 undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V4I64 = select <4 x i1> undef, <4 x i64> undef, <4 x i64> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8I64 = select <8 x i1> undef, <8 x i64> undef, <8 x i64> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I32 = select i1 undef, i32 undef, i32 undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4I32 = select <4 x i1> undef, <4 x i32> undef, <4 x i32> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V8I32 = select <8 x i1> undef, <8 x i32> undef, <8 x i32> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V16I32 = select <16 x i1> undef, <16 x i32> undef, <16 x i32> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I16 = select i1 undef, i16 undef, i16 undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I16 = select <8 x i1> undef, <8 x i16> undef, <8 x i16> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V16I16 = select <16 x i1> undef, <16 x i16> undef, <16 x i16> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V32I16 = select <32 x i1> undef, <32 x i16> undef, <32 x i16> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I8 = select i1 undef, i8 undef, i8 undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I8 = select <16 x i1> undef, <16 x i8> undef, <16 x i8> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V32I8 = select <32 x i1> undef, <32 x i8> undef, <32 x i8> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V64I8 = select <64 x i1> undef, <64 x i8> undef, <64 x i8> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; AVX1-LABEL: 'test_select' +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I64 = select i1 undef, i64 undef, i64 undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4I64 = select <4 x i1> undef, <4 x i64> undef, <4 x i64> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V8I64 = select <8 x i1> undef, <8 x i64> undef, <8 x i64> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I32 = select i1 undef, i32 undef, i32 undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4I32 = select <4 x i1> undef, <4 x i32> undef, <4 x i32> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I32 = select <8 x i1> undef, <8 x i32> undef, <8 x i32> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V16I32 = select <16 x i1> undef, <16 x i32> undef, <16 x i32> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I16 = select i1 undef, i16 undef, i16 undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I16 = select <8 x i1> undef, <8 x i16> undef, <8 x i16> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V16I16 = select <16 x i1> undef, <16 x i16> undef, <16 x i16> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V32I16 = select <32 x i1> undef, <32 x i16> undef, <32 x i16> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I8 = select i1 undef, i8 undef, i8 undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I8 = select <16 x i1> undef, <16 x i8> undef, <16 x i8> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V32I8 = select <32 x i1> undef, <32 x i8> undef, <32 x i8> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V64I8 = select <64 x i1> undef, <64 x i8> undef, <64 x i8> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; AVX2-LABEL: 'test_select' +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I64 = select i1 undef, i64 undef, i64 undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4I64 = select <4 x i1> undef, <4 x i64> undef, <4 x i64> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V8I64 = select <8 x i1> undef, <8 x i64> undef, <8 x i64> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I32 = select i1 undef, i32 undef, i32 undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4I32 = select <4 x i1> undef, <4 x i32> undef, <4 x i32> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I32 = select <8 x i1> undef, <8 x i32> undef, <8 x i32> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V16I32 = select <16 x i1> undef, <16 x i32> undef, <16 x i32> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I16 = select i1 undef, i16 undef, i16 undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I16 = select <8 x i1> undef, <8 x i16> undef, <8 x i16> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I16 = select <16 x i1> undef, <16 x i16> undef, <16 x i16> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V32I16 = select <32 x i1> undef, <32 x i16> undef, <32 x i16> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I8 = select i1 undef, i8 undef, i8 undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I8 = select <16 x i1> undef, <16 x i8> undef, <16 x i8> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V32I8 = select <32 x i1> undef, <32 x i8> undef, <32 x i8> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V64I8 = select <64 x i1> undef, <64 x i8> undef, <64 x i8> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; AVX512F-LABEL: 'test_select' +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I64 = select i1 undef, i64 undef, i64 undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4I64 = select <4 x i1> undef, <4 x i64> undef, <4 x i64> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I64 = select <8 x i1> undef, <8 x i64> undef, <8 x i64> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I32 = select i1 undef, i32 undef, i32 undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4I32 = select <4 x i1> undef, <4 x i32> undef, <4 x i32> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I32 = select <8 x i1> undef, <8 x i32> undef, <8 x i32> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I32 = select <16 x i1> undef, <16 x i32> undef, <16 x i32> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I16 = select i1 undef, i16 undef, i16 undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I16 = select <8 x i1> undef, <8 x i16> undef, <8 x i16> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I16 = select <16 x i1> undef, <16 x i16> undef, <16 x i16> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V32I16 = select <32 x i1> undef, <32 x i16> undef, <32 x i16> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I8 = select i1 undef, i8 undef, i8 undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I8 = select <16 x i1> undef, <16 x i8> undef, <16 x i8> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V32I8 = select <32 x i1> undef, <32 x i8> undef, <32 x i8> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V64I8 = select <64 x i1> undef, <64 x i8> undef, <64 x i8> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; AVX512BW-LABEL: 'test_select' +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I64 = select i1 undef, i64 undef, i64 undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4I64 = select <4 x i1> undef, <4 x i64> undef, <4 x i64> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I64 = select <8 x i1> undef, <8 x i64> undef, <8 x i64> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I32 = select i1 undef, i32 undef, i32 undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4I32 = select <4 x i1> undef, <4 x i32> undef, <4 x i32> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I32 = select <8 x i1> undef, <8 x i32> undef, <8 x i32> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I32 = select <16 x i1> undef, <16 x i32> undef, <16 x i32> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I16 = select i1 undef, i16 undef, i16 undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I16 = select <8 x i1> undef, <8 x i16> undef, <8 x i16> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I16 = select <16 x i1> undef, <16 x i16> undef, <16 x i16> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V32I16 = select <32 x i1> undef, <32 x i16> undef, <32 x i16> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I8 = select i1 undef, i8 undef, i8 undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I8 = select <16 x i1> undef, <16 x i8> undef, <16 x i8> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V32I8 = select <32 x i1> undef, <32 x i8> undef, <32 x i8> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V64I8 = select <64 x i1> undef, <64 x i8> undef, <64 x i8> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef ; %I64 = select i1 undef, i64 undef, i64 undef %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef @@ -56,16 +151,49 @@ } define i32 @test_select_fp() { -; CHECK-LABEL: 'test_select_fp' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = select i1 undef, double undef, double undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = select <2 x i1> undef, <2 x double> undef, <2 x double> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F64 = select <4 x i1> undef, <4 x double> undef, <4 x double> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F64 = select <8 x i1> undef, <8 x double> undef, <8 x double> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = select i1 undef, float undef, float undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = select <4 x i1> undef, <4 x float> undef, <4 x float> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F32 = select <8 x i1> undef, <8 x float> undef, <8 x float> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16F32 = select <16 x i1> undef, <16 x float> undef, <16 x float> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; SSE2-LABEL: 'test_select_fp' +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %F64 = select i1 undef, double undef, double undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V2F64 = select <2 x i1> undef, <2 x double> undef, <2 x double> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V4F64 = select <4 x i1> undef, <4 x double> undef, <4 x double> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 12 for instruction: %V8F64 = select <8 x i1> undef, <8 x double> undef, <8 x double> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %F32 = select i1 undef, float undef, float undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V4F32 = select <4 x i1> undef, <4 x float> undef, <4 x float> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V8F32 = select <8 x i1> undef, <8 x float> undef, <8 x float> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 12 for instruction: %V16F32 = select <16 x i1> undef, <16 x float> undef, <16 x float> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; SSE4-LABEL: 'test_select_fp' +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = select i1 undef, double undef, double undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = select <2 x i1> undef, <2 x double> undef, <2 x double> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V4F64 = select <4 x i1> undef, <4 x double> undef, <4 x double> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F64 = select <8 x i1> undef, <8 x double> undef, <8 x double> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = select i1 undef, float undef, float undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = select <4 x i1> undef, <4 x float> undef, <4 x float> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V8F32 = select <8 x i1> undef, <8 x float> undef, <8 x float> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V16F32 = select <16 x i1> undef, <16 x float> undef, <16 x float> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; AVX-LABEL: 'test_select_fp' +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = select i1 undef, double undef, double undef +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = select <2 x i1> undef, <2 x double> undef, <2 x double> undef +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F64 = select <4 x i1> undef, <4 x double> undef, <4 x double> undef +; AVX-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V8F64 = select <8 x i1> undef, <8 x double> undef, <8 x double> undef +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = select i1 undef, float undef, float undef +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = select <4 x i1> undef, <4 x float> undef, <4 x float> undef +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F32 = select <8 x i1> undef, <8 x float> undef, <8 x float> undef +; AVX-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V16F32 = select <16 x i1> undef, <16 x float> undef, <16 x float> undef +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; AVX512-LABEL: 'test_select_fp' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = select i1 undef, double undef, double undef +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = select <2 x i1> undef, <2 x double> undef, <2 x double> undef +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F64 = select <4 x i1> undef, <4 x double> undef, <4 x double> undef +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F64 = select <8 x i1> undef, <8 x double> undef, <8 x double> undef +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = select i1 undef, float undef, float undef +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = select <4 x i1> undef, <4 x float> undef, <4 x float> undef +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F32 = select <8 x i1> undef, <8 x float> undef, <8 x float> undef +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16F32 = select <16 x i1> undef, <16 x float> undef, <16 x float> undef +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef ; %F64 = select i1 undef, double undef, double undef %V2F64 = select <2 x i1> undef, <2 x double> undef, <2 x double> undef @@ -84,45 +212,105 @@ ; Integers of the same size should also use those instructions. define <2 x i64> @test_2i64(<2 x i64> %a, <2 x i64> %b) { -; CHECK-LABEL: 'test_2i64' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <2 x i1> , <2 x i64> %a, <2 x i64> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x i64> %sel +; SSE2-LABEL: 'test_2i64' +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <2 x i1> , <2 x i64> %a, <2 x i64> %b +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x i64> %sel +; +; SSE4-LABEL: 'test_2i64' +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <2 x i1> , <2 x i64> %a, <2 x i64> %b +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x i64> %sel +; +; AVX-LABEL: 'test_2i64' +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <2 x i1> , <2 x i64> %a, <2 x i64> %b +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x i64> %sel +; +; AVX512-LABEL: 'test_2i64' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <2 x i1> , <2 x i64> %a, <2 x i64> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x i64> %sel ; %sel = select <2 x i1> , <2 x i64> %a, <2 x i64> %b ret <2 x i64> %sel } define <2 x double> @test_2double(<2 x double> %a, <2 x double> %b) { -; CHECK-LABEL: 'test_2double' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <2 x i1> , <2 x double> %a, <2 x double> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x double> %sel +; SSE2-LABEL: 'test_2double' +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <2 x i1> , <2 x double> %a, <2 x double> %b +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x double> %sel +; +; SSE4-LABEL: 'test_2double' +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <2 x i1> , <2 x double> %a, <2 x double> %b +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x double> %sel +; +; AVX-LABEL: 'test_2double' +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <2 x i1> , <2 x double> %a, <2 x double> %b +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x double> %sel +; +; AVX512-LABEL: 'test_2double' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <2 x i1> , <2 x double> %a, <2 x double> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x double> %sel ; %sel = select <2 x i1> , <2 x double> %a, <2 x double> %b ret <2 x double> %sel } define <4 x i32> @test_4i32(<4 x i32> %a, <4 x i32> %b) { -; CHECK-LABEL: 'test_4i32' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x i32> %a, <4 x i32> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i32> %sel +; SSE2-LABEL: 'test_4i32' +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <4 x i1> , <4 x i32> %a, <4 x i32> %b +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i32> %sel +; +; SSE4-LABEL: 'test_4i32' +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x i32> %a, <4 x i32> %b +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i32> %sel +; +; AVX-LABEL: 'test_4i32' +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x i32> %a, <4 x i32> %b +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i32> %sel +; +; AVX512-LABEL: 'test_4i32' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x i32> %a, <4 x i32> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i32> %sel ; %sel = select <4 x i1> , <4 x i32> %a, <4 x i32> %b ret <4 x i32> %sel } define <4 x float> @test_4float(<4 x float> %a, <4 x float> %b) { -; CHECK-LABEL: 'test_4float' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x float> %a, <4 x float> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x float> %sel +; SSE2-LABEL: 'test_4float' +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <4 x i1> , <4 x float> %a, <4 x float> %b +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x float> %sel +; +; SSE4-LABEL: 'test_4float' +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x float> %a, <4 x float> %b +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x float> %sel +; +; AVX-LABEL: 'test_4float' +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x float> %a, <4 x float> %b +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x float> %sel +; +; AVX512-LABEL: 'test_4float' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x float> %a, <4 x float> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x float> %sel ; %sel = select <4 x i1> , <4 x float> %a, <4 x float> %b ret <4 x float> %sel } define <16 x i8> @test_16i8(<16 x i8> %a, <16 x i8> %b) { -; CHECK-LABEL: 'test_16i8' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <16 x i1> , <16 x i8> %a, <16 x i8> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i8> %sel +; SSE2-LABEL: 'test_16i8' +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <16 x i1> , <16 x i8> %a, <16 x i8> %b +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i8> %sel +; +; SSE4-LABEL: 'test_16i8' +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <16 x i1> , <16 x i8> %a, <16 x i8> %b +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i8> %sel +; +; AVX-LABEL: 'test_16i8' +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <16 x i1> , <16 x i8> %a, <16 x i8> %b +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i8> %sel +; +; AVX512-LABEL: 'test_16i8' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <16 x i1> , <16 x i8> %a, <16 x i8> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i8> %sel ; %sel = select <16 x i1> , <16 x i8> %a, <16 x i8> %b ret <16 x i8> %sel @@ -132,54 +320,134 @@ ; Integers of the same size should also use those instructions. define <4 x i64> @test_4i64(<4 x i64> %a, <4 x i64> %b) { -; CHECK-LABEL: 'test_4i64' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x i64> %a, <4 x i64> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i64> %sel +; SSE2-LABEL: 'test_4i64' +; SSE2-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %sel = select <4 x i1> , <4 x i64> %a, <4 x i64> %b +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i64> %sel +; +; SSE4-LABEL: 'test_4i64' +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <4 x i1> , <4 x i64> %a, <4 x i64> %b +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i64> %sel +; +; AVX-LABEL: 'test_4i64' +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x i64> %a, <4 x i64> %b +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i64> %sel +; +; AVX512-LABEL: 'test_4i64' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x i64> %a, <4 x i64> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i64> %sel ; %sel = select <4 x i1> , <4 x i64> %a, <4 x i64> %b ret <4 x i64> %sel } define <4 x double> @test_4double(<4 x double> %a, <4 x double> %b) { -; CHECK-LABEL: 'test_4double' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x double> %a, <4 x double> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x double> %sel +; SSE2-LABEL: 'test_4double' +; SSE2-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %sel = select <4 x i1> , <4 x double> %a, <4 x double> %b +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x double> %sel +; +; SSE4-LABEL: 'test_4double' +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <4 x i1> , <4 x double> %a, <4 x double> %b +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x double> %sel +; +; AVX-LABEL: 'test_4double' +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x double> %a, <4 x double> %b +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x double> %sel +; +; AVX512-LABEL: 'test_4double' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x double> %a, <4 x double> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x double> %sel ; %sel = select <4 x i1> , <4 x double> %a, <4 x double> %b ret <4 x double> %sel } define <8 x i32> @test_8i32(<8 x i32> %a, <8 x i32> %b) { -; CHECK-LABEL: 'test_8i32' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <8 x i1> , <8 x i32> %a, <8 x i32> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x i32> %sel +; SSE2-LABEL: 'test_8i32' +; SSE2-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %sel = select <8 x i1> , <8 x i32> %a, <8 x i32> %b +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x i32> %sel +; +; SSE4-LABEL: 'test_8i32' +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <8 x i1> , <8 x i32> %a, <8 x i32> %b +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x i32> %sel +; +; AVX-LABEL: 'test_8i32' +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <8 x i1> , <8 x i32> %a, <8 x i32> %b +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x i32> %sel +; +; AVX512-LABEL: 'test_8i32' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <8 x i1> , <8 x i32> %a, <8 x i32> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x i32> %sel ; %sel = select <8 x i1> , <8 x i32> %a, <8 x i32> %b ret <8 x i32> %sel } define <8 x float> @test_8float(<8 x float> %a, <8 x float> %b) { -; CHECK-LABEL: 'test_8float' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <8 x i1> , <8 x float> %a, <8 x float> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x float> %sel +; SSE2-LABEL: 'test_8float' +; SSE2-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %sel = select <8 x i1> , <8 x float> %a, <8 x float> %b +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x float> %sel +; +; SSE4-LABEL: 'test_8float' +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <8 x i1> , <8 x float> %a, <8 x float> %b +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x float> %sel +; +; AVX-LABEL: 'test_8float' +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <8 x i1> , <8 x float> %a, <8 x float> %b +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x float> %sel +; +; AVX512-LABEL: 'test_8float' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <8 x i1> , <8 x float> %a, <8 x float> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x float> %sel ; %sel = select <8 x i1> , <8 x float> %a, <8 x float> %b ret <8 x float> %sel } define <16 x i16> @test_16i16(<16 x i16> %a, <16 x i16> %b) { -; CHECK-LABEL: 'test_16i16' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <16 x i1> , <16 x i16> %a, <16 x i16> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i16> %sel +; SSE2-LABEL: 'test_16i16' +; SSE2-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %sel = select <16 x i1> , <16 x i16> %a, <16 x i16> %b +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i16> %sel +; +; SSE4-LABEL: 'test_16i16' +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <16 x i1> , <16 x i16> %a, <16 x i16> %b +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i16> %sel +; +; AVX1-LABEL: 'test_16i16' +; AVX1-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <16 x i1> , <16 x i16> %a, <16 x i16> %b +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i16> %sel +; +; AVX2-LABEL: 'test_16i16' +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <16 x i1> , <16 x i16> %a, <16 x i16> %b +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i16> %sel +; +; AVX512-LABEL: 'test_16i16' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <16 x i1> , <16 x i16> %a, <16 x i16> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i16> %sel ; %sel = select <16 x i1> , <16 x i16> %a, <16 x i16> %b ret <16 x i16> %sel } define <32 x i8> @test_32i8(<32 x i8> %a, <32 x i8> %b) { -; CHECK-LABEL: 'test_32i8' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <32 x i1> , <32 x i8> %a, <32 x i8> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <32 x i8> %sel +; SSE2-LABEL: 'test_32i8' +; SSE2-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %sel = select <32 x i1> , <32 x i8> %a, <32 x i8> %b +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <32 x i8> %sel +; +; SSE4-LABEL: 'test_32i8' +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <32 x i1> , <32 x i8> %a, <32 x i8> %b +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <32 x i8> %sel +; +; AVX1-LABEL: 'test_32i8' +; AVX1-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <32 x i1> , <32 x i8> %a, <32 x i8> %b +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <32 x i8> %sel +; +; AVX2-LABEL: 'test_32i8' +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <32 x i1> , <32 x i8> %a, <32 x i8> %b +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <32 x i8> %sel +; +; AVX512-LABEL: 'test_32i8' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <32 x i1> , <32 x i8> %a, <32 x i8> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <32 x i8> %sel ; %sel = select <32 x i1> , <32 x i8> %a, <32 x i8> %b ret <32 x i8> %sel diff --git a/llvm/test/Analysis/CostModel/X86/select-latency.ll b/llvm/test/Analysis/CostModel/X86/select-latency.ll --- a/llvm/test/Analysis/CostModel/X86/select-latency.ll +++ b/llvm/test/Analysis/CostModel/X86/select-latency.ll @@ -1,36 +1,131 @@ ; NOTE: Assertions have been autogenerated by utils/update_analyze_test_checks.py -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=latency -mtriple=x86_64-- -mattr=+sse2 | FileCheck %s -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=latency -mtriple=x86_64-- -mattr=+sse4.1 | FileCheck %s -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=latency -mtriple=x86_64-- -mattr=+avx | FileCheck %s -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=latency -mtriple=x86_64-- -mattr=+avx2 | FileCheck %s -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=latency -mtriple=x86_64-- -mattr=+avx512f,+avx512vl | FileCheck %s -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=latency -mtriple=x86_64-- -mattr=+avx512bw,+avx512vl | FileCheck %s +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=latency -mtriple=x86_64-- -mattr=+sse2 | FileCheck %s -check-prefixes=SSE +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=latency -mtriple=x86_64-- -mattr=+sse4.1 | FileCheck %s -check-prefixes=SSE +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=latency -mtriple=x86_64-- -mattr=+avx | FileCheck %s -check-prefixes=AVX,AVX1 +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=latency -mtriple=x86_64-- -mattr=+avx2 | FileCheck %s -check-prefixes=AVX,AVX2 +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=latency -mtriple=x86_64-- -mattr=+avx512f,+avx512vl | FileCheck %s -check-prefixes=AVX512,AVX512F +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=latency -mtriple=x86_64-- -mattr=+avx512bw,+avx512vl | FileCheck %s -check-prefixes=AVX512,AVX512BW ; -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=latency -mtriple=x86_64-- -mcpu=slm | FileCheck %s -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=latency -mtriple=x86_64-- -mcpu=goldmont | FileCheck %s -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=latency -mtriple=x86_64-- -mcpu=btver2 | FileCheck %s +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=latency -mtriple=x86_64-- -mcpu=slm | FileCheck %s --check-prefixes=SLM +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=latency -mtriple=x86_64-- -mcpu=goldmont | FileCheck %s --check-prefixes=SSE +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=latency -mtriple=x86_64-- -mcpu=btver2 | FileCheck %s --check-prefixes=AVX,AVX1 ; Verify the cost of vector select instructions. define i32 @test_select() { -; CHECK-LABEL: 'test_select' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I64 = select i1 undef, i64 undef, i64 undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4I64 = select <4 x i1> undef, <4 x i64> undef, <4 x i64> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I64 = select <8 x i1> undef, <8 x i64> undef, <8 x i64> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I32 = select i1 undef, i32 undef, i32 undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4I32 = select <4 x i1> undef, <4 x i32> undef, <4 x i32> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I32 = select <8 x i1> undef, <8 x i32> undef, <8 x i32> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I32 = select <16 x i1> undef, <16 x i32> undef, <16 x i32> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I16 = select i1 undef, i16 undef, i16 undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I16 = select <8 x i1> undef, <8 x i16> undef, <8 x i16> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I16 = select <16 x i1> undef, <16 x i16> undef, <16 x i16> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V32I16 = select <32 x i1> undef, <32 x i16> undef, <32 x i16> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I8 = select i1 undef, i8 undef, i8 undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I8 = select <16 x i1> undef, <16 x i8> undef, <16 x i8> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V32I8 = select <32 x i1> undef, <32 x i8> undef, <32 x i8> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V64I8 = select <64 x i1> undef, <64 x i8> undef, <64 x i8> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; SSE-LABEL: 'test_select' +; SSE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I64 = select i1 undef, i64 undef, i64 undef +; SSE-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef +; SSE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V4I64 = select <4 x i1> undef, <4 x i64> undef, <4 x i64> undef +; SSE-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V8I64 = select <8 x i1> undef, <8 x i64> undef, <8 x i64> undef +; SSE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I32 = select i1 undef, i32 undef, i32 undef +; SSE-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V4I32 = select <4 x i1> undef, <4 x i32> undef, <4 x i32> undef +; SSE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8I32 = select <8 x i1> undef, <8 x i32> undef, <8 x i32> undef +; SSE-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V16I32 = select <16 x i1> undef, <16 x i32> undef, <16 x i32> undef +; SSE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I16 = select i1 undef, i16 undef, i16 undef +; SSE-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V8I16 = select <8 x i1> undef, <8 x i16> undef, <8 x i16> undef +; SSE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V16I16 = select <16 x i1> undef, <16 x i16> undef, <16 x i16> undef +; SSE-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V32I16 = select <32 x i1> undef, <32 x i16> undef, <32 x i16> undef +; SSE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I8 = select i1 undef, i8 undef, i8 undef +; SSE-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V16I8 = select <16 x i1> undef, <16 x i8> undef, <16 x i8> undef +; SSE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V32I8 = select <32 x i1> undef, <32 x i8> undef, <32 x i8> undef +; SSE-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V64I8 = select <64 x i1> undef, <64 x i8> undef, <64 x i8> undef +; SSE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; AVX1-LABEL: 'test_select' +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I64 = select i1 undef, i64 undef, i64 undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V4I64 = select <4 x i1> undef, <4 x i64> undef, <4 x i64> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V8I64 = select <8 x i1> undef, <8 x i64> undef, <8 x i64> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I32 = select i1 undef, i32 undef, i32 undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V4I32 = select <4 x i1> undef, <4 x i32> undef, <4 x i32> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V8I32 = select <8 x i1> undef, <8 x i32> undef, <8 x i32> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V16I32 = select <16 x i1> undef, <16 x i32> undef, <16 x i32> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I16 = select i1 undef, i16 undef, i16 undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V8I16 = select <8 x i1> undef, <8 x i16> undef, <8 x i16> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V16I16 = select <16 x i1> undef, <16 x i16> undef, <16 x i16> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V32I16 = select <32 x i1> undef, <32 x i16> undef, <32 x i16> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I8 = select i1 undef, i8 undef, i8 undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V16I8 = select <16 x i1> undef, <16 x i8> undef, <16 x i8> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V32I8 = select <32 x i1> undef, <32 x i8> undef, <32 x i8> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V64I8 = select <64 x i1> undef, <64 x i8> undef, <64 x i8> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; AVX2-LABEL: 'test_select' +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I64 = select i1 undef, i64 undef, i64 undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V4I64 = select <4 x i1> undef, <4 x i64> undef, <4 x i64> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8I64 = select <8 x i1> undef, <8 x i64> undef, <8 x i64> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I32 = select i1 undef, i32 undef, i32 undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V4I32 = select <4 x i1> undef, <4 x i32> undef, <4 x i32> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V8I32 = select <8 x i1> undef, <8 x i32> undef, <8 x i32> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V16I32 = select <16 x i1> undef, <16 x i32> undef, <16 x i32> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I16 = select i1 undef, i16 undef, i16 undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V8I16 = select <8 x i1> undef, <8 x i16> undef, <8 x i16> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V16I16 = select <16 x i1> undef, <16 x i16> undef, <16 x i16> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V32I16 = select <32 x i1> undef, <32 x i16> undef, <32 x i16> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I8 = select i1 undef, i8 undef, i8 undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V16I8 = select <16 x i1> undef, <16 x i8> undef, <16 x i8> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V32I8 = select <32 x i1> undef, <32 x i8> undef, <32 x i8> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V64I8 = select <64 x i1> undef, <64 x i8> undef, <64 x i8> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; AVX512F-LABEL: 'test_select' +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I64 = select i1 undef, i64 undef, i64 undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4I64 = select <4 x i1> undef, <4 x i64> undef, <4 x i64> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I64 = select <8 x i1> undef, <8 x i64> undef, <8 x i64> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I32 = select i1 undef, i32 undef, i32 undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4I32 = select <4 x i1> undef, <4 x i32> undef, <4 x i32> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I32 = select <8 x i1> undef, <8 x i32> undef, <8 x i32> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I32 = select <16 x i1> undef, <16 x i32> undef, <16 x i32> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I16 = select i1 undef, i16 undef, i16 undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I16 = select <8 x i1> undef, <8 x i16> undef, <8 x i16> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I16 = select <16 x i1> undef, <16 x i16> undef, <16 x i16> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V32I16 = select <32 x i1> undef, <32 x i16> undef, <32 x i16> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I8 = select i1 undef, i8 undef, i8 undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I8 = select <16 x i1> undef, <16 x i8> undef, <16 x i8> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V32I8 = select <32 x i1> undef, <32 x i8> undef, <32 x i8> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V64I8 = select <64 x i1> undef, <64 x i8> undef, <64 x i8> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; AVX512BW-LABEL: 'test_select' +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I64 = select i1 undef, i64 undef, i64 undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4I64 = select <4 x i1> undef, <4 x i64> undef, <4 x i64> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I64 = select <8 x i1> undef, <8 x i64> undef, <8 x i64> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I32 = select i1 undef, i32 undef, i32 undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4I32 = select <4 x i1> undef, <4 x i32> undef, <4 x i32> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I32 = select <8 x i1> undef, <8 x i32> undef, <8 x i32> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I32 = select <16 x i1> undef, <16 x i32> undef, <16 x i32> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I16 = select i1 undef, i16 undef, i16 undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I16 = select <8 x i1> undef, <8 x i16> undef, <8 x i16> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I16 = select <16 x i1> undef, <16 x i16> undef, <16 x i16> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V32I16 = select <32 x i1> undef, <32 x i16> undef, <32 x i16> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I8 = select i1 undef, i8 undef, i8 undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I8 = select <16 x i1> undef, <16 x i8> undef, <16 x i8> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V32I8 = select <32 x i1> undef, <32 x i8> undef, <32 x i8> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V64I8 = select <64 x i1> undef, <64 x i8> undef, <64 x i8> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; SLM-LABEL: 'test_select' +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I64 = select i1 undef, i64 undef, i64 undef +; SLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V4I64 = select <4 x i1> undef, <4 x i64> undef, <4 x i64> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 16 for instruction: %V8I64 = select <8 x i1> undef, <8 x i64> undef, <8 x i64> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I32 = select i1 undef, i32 undef, i32 undef +; SLM-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V4I32 = select <4 x i1> undef, <4 x i32> undef, <4 x i32> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8I32 = select <8 x i1> undef, <8 x i32> undef, <8 x i32> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V16I32 = select <16 x i1> undef, <16 x i32> undef, <16 x i32> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I16 = select i1 undef, i16 undef, i16 undef +; SLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8I16 = select <8 x i1> undef, <8 x i16> undef, <8 x i16> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V16I16 = select <16 x i1> undef, <16 x i16> undef, <16 x i16> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 16 for instruction: %V32I16 = select <32 x i1> undef, <32 x i16> undef, <32 x i16> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I8 = select i1 undef, i8 undef, i8 undef +; SLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V16I8 = select <16 x i1> undef, <16 x i8> undef, <16 x i8> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V32I8 = select <32 x i1> undef, <32 x i8> undef, <32 x i8> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 16 for instruction: %V64I8 = select <64 x i1> undef, <64 x i8> undef, <64 x i8> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef ; %I64 = select i1 undef, i64 undef, i64 undef %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef @@ -56,16 +151,60 @@ } define i32 @test_select_fp() { -; CHECK-LABEL: 'test_select_fp' -; CHECK-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %F64 = select i1 undef, double undef, double undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V2F64 = select <2 x i1> undef, <2 x double> undef, <2 x double> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V4F64 = select <4 x i1> undef, <4 x double> undef, <4 x double> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V8F64 = select <8 x i1> undef, <8 x double> undef, <8 x double> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %F32 = select i1 undef, float undef, float undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V4F32 = select <4 x i1> undef, <4 x float> undef, <4 x float> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V8F32 = select <8 x i1> undef, <8 x float> undef, <8 x float> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V16F32 = select <16 x i1> undef, <16 x float> undef, <16 x float> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; SSE-LABEL: 'test_select_fp' +; SSE-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %F64 = select i1 undef, double undef, double undef +; SSE-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V2F64 = select <2 x i1> undef, <2 x double> undef, <2 x double> undef +; SSE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V4F64 = select <4 x i1> undef, <4 x double> undef, <4 x double> undef +; SSE-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V8F64 = select <8 x i1> undef, <8 x double> undef, <8 x double> undef +; SSE-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %F32 = select i1 undef, float undef, float undef +; SSE-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V4F32 = select <4 x i1> undef, <4 x float> undef, <4 x float> undef +; SSE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F32 = select <8 x i1> undef, <8 x float> undef, <8 x float> undef +; SSE-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V16F32 = select <16 x i1> undef, <16 x float> undef, <16 x float> undef +; SSE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; AVX1-LABEL: 'test_select_fp' +; AVX1-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %F64 = select i1 undef, double undef, double undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V2F64 = select <2 x i1> undef, <2 x double> undef, <2 x double> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V4F64 = select <4 x i1> undef, <4 x double> undef, <4 x double> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V8F64 = select <8 x i1> undef, <8 x double> undef, <8 x double> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %F32 = select i1 undef, float undef, float undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V4F32 = select <4 x i1> undef, <4 x float> undef, <4 x float> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V8F32 = select <8 x i1> undef, <8 x float> undef, <8 x float> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V16F32 = select <16 x i1> undef, <16 x float> undef, <16 x float> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; AVX2-LABEL: 'test_select_fp' +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %F64 = select i1 undef, double undef, double undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V2F64 = select <2 x i1> undef, <2 x double> undef, <2 x double> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V4F64 = select <4 x i1> undef, <4 x double> undef, <4 x double> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F64 = select <8 x i1> undef, <8 x double> undef, <8 x double> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %F32 = select i1 undef, float undef, float undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V4F32 = select <4 x i1> undef, <4 x float> undef, <4 x float> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V8F32 = select <8 x i1> undef, <8 x float> undef, <8 x float> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V16F32 = select <16 x i1> undef, <16 x float> undef, <16 x float> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; AVX512-LABEL: 'test_select_fp' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = select i1 undef, double undef, double undef +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = select <2 x i1> undef, <2 x double> undef, <2 x double> undef +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F64 = select <4 x i1> undef, <4 x double> undef, <4 x double> undef +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F64 = select <8 x i1> undef, <8 x double> undef, <8 x double> undef +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = select i1 undef, float undef, float undef +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = select <4 x i1> undef, <4 x float> undef, <4 x float> undef +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F32 = select <8 x i1> undef, <8 x float> undef, <8 x float> undef +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16F32 = select <16 x i1> undef, <16 x float> undef, <16 x float> undef +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; SLM-LABEL: 'test_select_fp' +; SLM-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %F64 = select i1 undef, double undef, double undef +; SLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V2F64 = select <2 x i1> undef, <2 x double> undef, <2 x double> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V4F64 = select <4 x i1> undef, <4 x double> undef, <4 x double> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 16 for instruction: %V8F64 = select <8 x i1> undef, <8 x double> undef, <8 x double> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %F32 = select i1 undef, float undef, float undef +; SLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V4F32 = select <4 x i1> undef, <4 x float> undef, <4 x float> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V8F32 = select <8 x i1> undef, <8 x float> undef, <8 x float> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 16 for instruction: %V16F32 = select <16 x i1> undef, <16 x float> undef, <16 x float> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef ; %F64 = select i1 undef, double undef, double undef %V2F64 = select <2 x i1> undef, <2 x double> undef, <2 x double> undef @@ -84,45 +223,105 @@ ; Integers of the same size should also use those instructions. define <2 x i64> @test_2i64(<2 x i64> %a, <2 x i64> %b) { -; CHECK-LABEL: 'test_2i64' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <2 x i1> , <2 x i64> %a, <2 x i64> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x i64> %sel +; SSE-LABEL: 'test_2i64' +; SSE-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <2 x i1> , <2 x i64> %a, <2 x i64> %b +; SSE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x i64> %sel +; +; AVX-LABEL: 'test_2i64' +; AVX-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <2 x i1> , <2 x i64> %a, <2 x i64> %b +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x i64> %sel +; +; AVX512-LABEL: 'test_2i64' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <2 x i1> , <2 x i64> %a, <2 x i64> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x i64> %sel +; +; SLM-LABEL: 'test_2i64' +; SLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %sel = select <2 x i1> , <2 x i64> %a, <2 x i64> %b +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x i64> %sel ; %sel = select <2 x i1> , <2 x i64> %a, <2 x i64> %b ret <2 x i64> %sel } define <2 x double> @test_2double(<2 x double> %a, <2 x double> %b) { -; CHECK-LABEL: 'test_2double' -; CHECK-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <2 x i1> , <2 x double> %a, <2 x double> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x double> %sel +; SSE-LABEL: 'test_2double' +; SSE-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <2 x i1> , <2 x double> %a, <2 x double> %b +; SSE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x double> %sel +; +; AVX-LABEL: 'test_2double' +; AVX-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <2 x i1> , <2 x double> %a, <2 x double> %b +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x double> %sel +; +; AVX512-LABEL: 'test_2double' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <2 x i1> , <2 x double> %a, <2 x double> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x double> %sel +; +; SLM-LABEL: 'test_2double' +; SLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %sel = select <2 x i1> , <2 x double> %a, <2 x double> %b +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x double> %sel ; %sel = select <2 x i1> , <2 x double> %a, <2 x double> %b ret <2 x double> %sel } define <4 x i32> @test_4i32(<4 x i32> %a, <4 x i32> %b) { -; CHECK-LABEL: 'test_4i32' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x i32> %a, <4 x i32> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i32> %sel +; SSE-LABEL: 'test_4i32' +; SSE-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <4 x i1> , <4 x i32> %a, <4 x i32> %b +; SSE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i32> %sel +; +; AVX-LABEL: 'test_4i32' +; AVX-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <4 x i1> , <4 x i32> %a, <4 x i32> %b +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i32> %sel +; +; AVX512-LABEL: 'test_4i32' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x i32> %a, <4 x i32> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i32> %sel +; +; SLM-LABEL: 'test_4i32' +; SLM-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <4 x i1> , <4 x i32> %a, <4 x i32> %b +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i32> %sel ; %sel = select <4 x i1> , <4 x i32> %a, <4 x i32> %b ret <4 x i32> %sel } define <4 x float> @test_4float(<4 x float> %a, <4 x float> %b) { -; CHECK-LABEL: 'test_4float' -; CHECK-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <4 x i1> , <4 x float> %a, <4 x float> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x float> %sel +; SSE-LABEL: 'test_4float' +; SSE-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <4 x i1> , <4 x float> %a, <4 x float> %b +; SSE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x float> %sel +; +; AVX-LABEL: 'test_4float' +; AVX-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <4 x i1> , <4 x float> %a, <4 x float> %b +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x float> %sel +; +; AVX512-LABEL: 'test_4float' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x float> %a, <4 x float> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x float> %sel +; +; SLM-LABEL: 'test_4float' +; SLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %sel = select <4 x i1> , <4 x float> %a, <4 x float> %b +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x float> %sel ; %sel = select <4 x i1> , <4 x float> %a, <4 x float> %b ret <4 x float> %sel } define <16 x i8> @test_16i8(<16 x i8> %a, <16 x i8> %b) { -; CHECK-LABEL: 'test_16i8' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <16 x i1> , <16 x i8> %a, <16 x i8> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i8> %sel +; SSE-LABEL: 'test_16i8' +; SSE-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <16 x i1> , <16 x i8> %a, <16 x i8> %b +; SSE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i8> %sel +; +; AVX-LABEL: 'test_16i8' +; AVX-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <16 x i1> , <16 x i8> %a, <16 x i8> %b +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i8> %sel +; +; AVX512-LABEL: 'test_16i8' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <16 x i1> , <16 x i8> %a, <16 x i8> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i8> %sel +; +; SLM-LABEL: 'test_16i8' +; SLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %sel = select <16 x i1> , <16 x i8> %a, <16 x i8> %b +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i8> %sel ; %sel = select <16 x i1> , <16 x i8> %a, <16 x i8> %b ret <16 x i8> %sel @@ -132,54 +331,150 @@ ; Integers of the same size should also use those instructions. define <4 x i64> @test_4i64(<4 x i64> %a, <4 x i64> %b) { -; CHECK-LABEL: 'test_4i64' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x i64> %a, <4 x i64> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i64> %sel +; SSE-LABEL: 'test_4i64' +; SSE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %sel = select <4 x i1> , <4 x i64> %a, <4 x i64> %b +; SSE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i64> %sel +; +; AVX1-LABEL: 'test_4i64' +; AVX1-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <4 x i1> , <4 x i64> %a, <4 x i64> %b +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i64> %sel +; +; AVX2-LABEL: 'test_4i64' +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <4 x i1> , <4 x i64> %a, <4 x i64> %b +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i64> %sel +; +; AVX512-LABEL: 'test_4i64' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x i64> %a, <4 x i64> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i64> %sel +; +; SLM-LABEL: 'test_4i64' +; SLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %sel = select <4 x i1> , <4 x i64> %a, <4 x i64> %b +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i64> %sel ; %sel = select <4 x i1> , <4 x i64> %a, <4 x i64> %b ret <4 x i64> %sel } define <4 x double> @test_4double(<4 x double> %a, <4 x double> %b) { -; CHECK-LABEL: 'test_4double' -; CHECK-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <4 x i1> , <4 x double> %a, <4 x double> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x double> %sel +; SSE-LABEL: 'test_4double' +; SSE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %sel = select <4 x i1> , <4 x double> %a, <4 x double> %b +; SSE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x double> %sel +; +; AVX1-LABEL: 'test_4double' +; AVX1-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <4 x i1> , <4 x double> %a, <4 x double> %b +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x double> %sel +; +; AVX2-LABEL: 'test_4double' +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <4 x i1> , <4 x double> %a, <4 x double> %b +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x double> %sel +; +; AVX512-LABEL: 'test_4double' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x double> %a, <4 x double> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x double> %sel +; +; SLM-LABEL: 'test_4double' +; SLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %sel = select <4 x i1> , <4 x double> %a, <4 x double> %b +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x double> %sel ; %sel = select <4 x i1> , <4 x double> %a, <4 x double> %b ret <4 x double> %sel } define <8 x i32> @test_8i32(<8 x i32> %a, <8 x i32> %b) { -; CHECK-LABEL: 'test_8i32' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <8 x i1> , <8 x i32> %a, <8 x i32> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x i32> %sel +; SSE-LABEL: 'test_8i32' +; SSE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %sel = select <8 x i1> , <8 x i32> %a, <8 x i32> %b +; SSE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x i32> %sel +; +; AVX1-LABEL: 'test_8i32' +; AVX1-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <8 x i1> , <8 x i32> %a, <8 x i32> %b +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x i32> %sel +; +; AVX2-LABEL: 'test_8i32' +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <8 x i1> , <8 x i32> %a, <8 x i32> %b +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x i32> %sel +; +; AVX512-LABEL: 'test_8i32' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <8 x i1> , <8 x i32> %a, <8 x i32> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x i32> %sel +; +; SLM-LABEL: 'test_8i32' +; SLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %sel = select <8 x i1> , <8 x i32> %a, <8 x i32> %b +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x i32> %sel ; %sel = select <8 x i1> , <8 x i32> %a, <8 x i32> %b ret <8 x i32> %sel } define <8 x float> @test_8float(<8 x float> %a, <8 x float> %b) { -; CHECK-LABEL: 'test_8float' -; CHECK-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <8 x i1> , <8 x float> %a, <8 x float> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x float> %sel +; SSE-LABEL: 'test_8float' +; SSE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %sel = select <8 x i1> , <8 x float> %a, <8 x float> %b +; SSE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x float> %sel +; +; AVX1-LABEL: 'test_8float' +; AVX1-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <8 x i1> , <8 x float> %a, <8 x float> %b +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x float> %sel +; +; AVX2-LABEL: 'test_8float' +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <8 x i1> , <8 x float> %a, <8 x float> %b +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x float> %sel +; +; AVX512-LABEL: 'test_8float' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <8 x i1> , <8 x float> %a, <8 x float> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x float> %sel +; +; SLM-LABEL: 'test_8float' +; SLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %sel = select <8 x i1> , <8 x float> %a, <8 x float> %b +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x float> %sel ; %sel = select <8 x i1> , <8 x float> %a, <8 x float> %b ret <8 x float> %sel } define <16 x i16> @test_16i16(<16 x i16> %a, <16 x i16> %b) { -; CHECK-LABEL: 'test_16i16' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <16 x i1> , <16 x i16> %a, <16 x i16> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i16> %sel +; SSE-LABEL: 'test_16i16' +; SSE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %sel = select <16 x i1> , <16 x i16> %a, <16 x i16> %b +; SSE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i16> %sel +; +; AVX1-LABEL: 'test_16i16' +; AVX1-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <16 x i1> , <16 x i16> %a, <16 x i16> %b +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i16> %sel +; +; AVX2-LABEL: 'test_16i16' +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <16 x i1> , <16 x i16> %a, <16 x i16> %b +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i16> %sel +; +; AVX512-LABEL: 'test_16i16' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <16 x i1> , <16 x i16> %a, <16 x i16> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i16> %sel +; +; SLM-LABEL: 'test_16i16' +; SLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %sel = select <16 x i1> , <16 x i16> %a, <16 x i16> %b +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i16> %sel ; %sel = select <16 x i1> , <16 x i16> %a, <16 x i16> %b ret <16 x i16> %sel } define <32 x i8> @test_32i8(<32 x i8> %a, <32 x i8> %b) { -; CHECK-LABEL: 'test_32i8' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <32 x i1> , <32 x i8> %a, <32 x i8> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <32 x i8> %sel +; SSE-LABEL: 'test_32i8' +; SSE-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %sel = select <32 x i1> , <32 x i8> %a, <32 x i8> %b +; SSE-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <32 x i8> %sel +; +; AVX1-LABEL: 'test_32i8' +; AVX1-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <32 x i1> , <32 x i8> %a, <32 x i8> %b +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <32 x i8> %sel +; +; AVX2-LABEL: 'test_32i8' +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <32 x i1> , <32 x i8> %a, <32 x i8> %b +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <32 x i8> %sel +; +; AVX512-LABEL: 'test_32i8' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <32 x i1> , <32 x i8> %a, <32 x i8> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <32 x i8> %sel +; +; SLM-LABEL: 'test_32i8' +; SLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %sel = select <32 x i1> , <32 x i8> %a, <32 x i8> %b +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <32 x i8> %sel ; %sel = select <32 x i1> , <32 x i8> %a, <32 x i8> %b ret <32 x i8> %sel diff --git a/llvm/test/Analysis/CostModel/X86/select-sizelatency.ll b/llvm/test/Analysis/CostModel/X86/select-sizelatency.ll --- a/llvm/test/Analysis/CostModel/X86/select-sizelatency.ll +++ b/llvm/test/Analysis/CostModel/X86/select-sizelatency.ll @@ -1,36 +1,150 @@ ; NOTE: Assertions have been autogenerated by utils/update_analyze_test_checks.py -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=size-latency -mtriple=x86_64-- -mattr=+sse2 | FileCheck %s -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=size-latency -mtriple=x86_64-- -mattr=+sse4.1 | FileCheck %s -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=size-latency -mtriple=x86_64-- -mattr=+avx | FileCheck %s -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=size-latency -mtriple=x86_64-- -mattr=+avx2 | FileCheck %s -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=size-latency -mtriple=x86_64-- -mattr=+avx512f,+avx512vl | FileCheck %s -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=size-latency -mtriple=x86_64-- -mattr=+avx512bw,+avx512vl | FileCheck %s +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=size-latency -mtriple=x86_64-- -mattr=+sse2 | FileCheck %s -check-prefixes=SSE2 +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=size-latency -mtriple=x86_64-- -mattr=+sse4.1 | FileCheck %s -check-prefixes=SSE4 +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=size-latency -mtriple=x86_64-- -mattr=+avx | FileCheck %s -check-prefixes=AVX,AVX1 +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=size-latency -mtriple=x86_64-- -mattr=+avx2 | FileCheck %s -check-prefixes=AVX,AVX2 +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=size-latency -mtriple=x86_64-- -mattr=+avx512f,+avx512vl | FileCheck %s -check-prefixes=AVX512,AVX512F +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=size-latency -mtriple=x86_64-- -mattr=+avx512bw,+avx512vl | FileCheck %s -check-prefixes=AVX512,AVX512BW ; -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=size-latency -mtriple=x86_64-- -mcpu=slm | FileCheck %s -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=size-latency -mtriple=x86_64-- -mcpu=goldmont | FileCheck %s -; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=size-latency -mtriple=x86_64-- -mcpu=btver2 | FileCheck %s +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=size-latency -mtriple=x86_64-- -mcpu=slm | FileCheck %s --check-prefixes=SLM +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=size-latency -mtriple=x86_64-- -mcpu=goldmont | FileCheck %s --check-prefixes=SSE4 +; RUN: opt < %s -passes="print" 2>&1 -disable-output -cost-kind=size-latency -mtriple=x86_64-- -mcpu=btver2 | FileCheck %s --check-prefixes=AVX,AVX1 ; Verify the cost of vector select instructions. define i32 @test_select() { -; CHECK-LABEL: 'test_select' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I64 = select i1 undef, i64 undef, i64 undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4I64 = select <4 x i1> undef, <4 x i64> undef, <4 x i64> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I64 = select <8 x i1> undef, <8 x i64> undef, <8 x i64> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I32 = select i1 undef, i32 undef, i32 undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4I32 = select <4 x i1> undef, <4 x i32> undef, <4 x i32> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I32 = select <8 x i1> undef, <8 x i32> undef, <8 x i32> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I32 = select <16 x i1> undef, <16 x i32> undef, <16 x i32> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I16 = select i1 undef, i16 undef, i16 undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I16 = select <8 x i1> undef, <8 x i16> undef, <8 x i16> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I16 = select <16 x i1> undef, <16 x i16> undef, <16 x i16> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V32I16 = select <32 x i1> undef, <32 x i16> undef, <32 x i16> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I8 = select i1 undef, i8 undef, i8 undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I8 = select <16 x i1> undef, <16 x i8> undef, <16 x i8> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V32I8 = select <32 x i1> undef, <32 x i8> undef, <32 x i8> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V64I8 = select <64 x i1> undef, <64 x i8> undef, <64 x i8> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; SSE2-LABEL: 'test_select' +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I64 = select i1 undef, i64 undef, i64 undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V4I64 = select <4 x i1> undef, <4 x i64> undef, <4 x i64> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 12 for instruction: %V8I64 = select <8 x i1> undef, <8 x i64> undef, <8 x i64> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I32 = select i1 undef, i32 undef, i32 undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V4I32 = select <4 x i1> undef, <4 x i32> undef, <4 x i32> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V8I32 = select <8 x i1> undef, <8 x i32> undef, <8 x i32> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 12 for instruction: %V16I32 = select <16 x i1> undef, <16 x i32> undef, <16 x i32> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I16 = select i1 undef, i16 undef, i16 undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V8I16 = select <8 x i1> undef, <8 x i16> undef, <8 x i16> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V16I16 = select <16 x i1> undef, <16 x i16> undef, <16 x i16> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 12 for instruction: %V32I16 = select <32 x i1> undef, <32 x i16> undef, <32 x i16> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I8 = select i1 undef, i8 undef, i8 undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V16I8 = select <16 x i1> undef, <16 x i8> undef, <16 x i8> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V32I8 = select <32 x i1> undef, <32 x i8> undef, <32 x i8> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 12 for instruction: %V64I8 = select <64 x i1> undef, <64 x i8> undef, <64 x i8> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; SSE4-LABEL: 'test_select' +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I64 = select i1 undef, i64 undef, i64 undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V4I64 = select <4 x i1> undef, <4 x i64> undef, <4 x i64> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V8I64 = select <8 x i1> undef, <8 x i64> undef, <8 x i64> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I32 = select i1 undef, i32 undef, i32 undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V4I32 = select <4 x i1> undef, <4 x i32> undef, <4 x i32> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8I32 = select <8 x i1> undef, <8 x i32> undef, <8 x i32> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V16I32 = select <16 x i1> undef, <16 x i32> undef, <16 x i32> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I16 = select i1 undef, i16 undef, i16 undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V8I16 = select <8 x i1> undef, <8 x i16> undef, <8 x i16> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V16I16 = select <16 x i1> undef, <16 x i16> undef, <16 x i16> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V32I16 = select <32 x i1> undef, <32 x i16> undef, <32 x i16> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I8 = select i1 undef, i8 undef, i8 undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V16I8 = select <16 x i1> undef, <16 x i8> undef, <16 x i8> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V32I8 = select <32 x i1> undef, <32 x i8> undef, <32 x i8> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V64I8 = select <64 x i1> undef, <64 x i8> undef, <64 x i8> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; AVX1-LABEL: 'test_select' +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I64 = select i1 undef, i64 undef, i64 undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V4I64 = select <4 x i1> undef, <4 x i64> undef, <4 x i64> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8I64 = select <8 x i1> undef, <8 x i64> undef, <8 x i64> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I32 = select i1 undef, i32 undef, i32 undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V4I32 = select <4 x i1> undef, <4 x i32> undef, <4 x i32> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V8I32 = select <8 x i1> undef, <8 x i32> undef, <8 x i32> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V16I32 = select <16 x i1> undef, <16 x i32> undef, <16 x i32> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I16 = select i1 undef, i16 undef, i16 undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V8I16 = select <8 x i1> undef, <8 x i16> undef, <8 x i16> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V16I16 = select <16 x i1> undef, <16 x i16> undef, <16 x i16> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V32I16 = select <32 x i1> undef, <32 x i16> undef, <32 x i16> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I8 = select i1 undef, i8 undef, i8 undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V16I8 = select <16 x i1> undef, <16 x i8> undef, <16 x i8> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V32I8 = select <32 x i1> undef, <32 x i8> undef, <32 x i8> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V64I8 = select <64 x i1> undef, <64 x i8> undef, <64 x i8> undef +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; AVX2-LABEL: 'test_select' +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I64 = select i1 undef, i64 undef, i64 undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V4I64 = select <4 x i1> undef, <4 x i64> undef, <4 x i64> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8I64 = select <8 x i1> undef, <8 x i64> undef, <8 x i64> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I32 = select i1 undef, i32 undef, i32 undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V4I32 = select <4 x i1> undef, <4 x i32> undef, <4 x i32> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V8I32 = select <8 x i1> undef, <8 x i32> undef, <8 x i32> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V16I32 = select <16 x i1> undef, <16 x i32> undef, <16 x i32> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I16 = select i1 undef, i16 undef, i16 undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V8I16 = select <8 x i1> undef, <8 x i16> undef, <8 x i16> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V16I16 = select <16 x i1> undef, <16 x i16> undef, <16 x i16> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V32I16 = select <32 x i1> undef, <32 x i16> undef, <32 x i16> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I8 = select i1 undef, i8 undef, i8 undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V16I8 = select <16 x i1> undef, <16 x i8> undef, <16 x i8> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V32I8 = select <32 x i1> undef, <32 x i8> undef, <32 x i8> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V64I8 = select <64 x i1> undef, <64 x i8> undef, <64 x i8> undef +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; AVX512F-LABEL: 'test_select' +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I64 = select i1 undef, i64 undef, i64 undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4I64 = select <4 x i1> undef, <4 x i64> undef, <4 x i64> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I64 = select <8 x i1> undef, <8 x i64> undef, <8 x i64> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I32 = select i1 undef, i32 undef, i32 undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4I32 = select <4 x i1> undef, <4 x i32> undef, <4 x i32> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I32 = select <8 x i1> undef, <8 x i32> undef, <8 x i32> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I32 = select <16 x i1> undef, <16 x i32> undef, <16 x i32> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I16 = select i1 undef, i16 undef, i16 undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I16 = select <8 x i1> undef, <8 x i16> undef, <8 x i16> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I16 = select <16 x i1> undef, <16 x i16> undef, <16 x i16> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V32I16 = select <32 x i1> undef, <32 x i16> undef, <32 x i16> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I8 = select i1 undef, i8 undef, i8 undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I8 = select <16 x i1> undef, <16 x i8> undef, <16 x i8> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V32I8 = select <32 x i1> undef, <32 x i8> undef, <32 x i8> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V64I8 = select <64 x i1> undef, <64 x i8> undef, <64 x i8> undef +; AVX512F-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; AVX512BW-LABEL: 'test_select' +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I64 = select i1 undef, i64 undef, i64 undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4I64 = select <4 x i1> undef, <4 x i64> undef, <4 x i64> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I64 = select <8 x i1> undef, <8 x i64> undef, <8 x i64> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I32 = select i1 undef, i32 undef, i32 undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4I32 = select <4 x i1> undef, <4 x i32> undef, <4 x i32> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I32 = select <8 x i1> undef, <8 x i32> undef, <8 x i32> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I32 = select <16 x i1> undef, <16 x i32> undef, <16 x i32> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I16 = select i1 undef, i16 undef, i16 undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8I16 = select <8 x i1> undef, <8 x i16> undef, <8 x i16> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I16 = select <16 x i1> undef, <16 x i16> undef, <16 x i16> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V32I16 = select <32 x i1> undef, <32 x i16> undef, <32 x i16> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I8 = select i1 undef, i8 undef, i8 undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16I8 = select <16 x i1> undef, <16 x i8> undef, <16 x i8> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V32I8 = select <32 x i1> undef, <32 x i8> undef, <32 x i8> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V64I8 = select <64 x i1> undef, <64 x i8> undef, <64 x i8> undef +; AVX512BW-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; SLM-LABEL: 'test_select' +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I64 = select i1 undef, i64 undef, i64 undef +; SLM-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V4I64 = select <4 x i1> undef, <4 x i64> undef, <4 x i64> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 12 for instruction: %V8I64 = select <8 x i1> undef, <8 x i64> undef, <8 x i64> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I32 = select i1 undef, i32 undef, i32 undef +; SLM-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V4I32 = select <4 x i1> undef, <4 x i32> undef, <4 x i32> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8I32 = select <8 x i1> undef, <8 x i32> undef, <8 x i32> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V16I32 = select <16 x i1> undef, <16 x i32> undef, <16 x i32> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I16 = select i1 undef, i16 undef, i16 undef +; SLM-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V8I16 = select <8 x i1> undef, <8 x i16> undef, <8 x i16> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V16I16 = select <16 x i1> undef, <16 x i16> undef, <16 x i16> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 12 for instruction: %V32I16 = select <32 x i1> undef, <32 x i16> undef, <32 x i16> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %I8 = select i1 undef, i8 undef, i8 undef +; SLM-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V16I8 = select <16 x i1> undef, <16 x i8> undef, <16 x i8> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V32I8 = select <32 x i1> undef, <32 x i8> undef, <32 x i8> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 12 for instruction: %V64I8 = select <64 x i1> undef, <64 x i8> undef, <64 x i8> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef ; %I64 = select i1 undef, i64 undef, i64 undef %V2I64 = select <2 x i1> undef, <2 x i64> undef, <2 x i64> undef @@ -56,16 +170,60 @@ } define i32 @test_select_fp() { -; CHECK-LABEL: 'test_select_fp' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = select i1 undef, double undef, double undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = select <2 x i1> undef, <2 x double> undef, <2 x double> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F64 = select <4 x i1> undef, <4 x double> undef, <4 x double> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F64 = select <8 x i1> undef, <8 x double> undef, <8 x double> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = select i1 undef, float undef, float undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = select <4 x i1> undef, <4 x float> undef, <4 x float> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F32 = select <8 x i1> undef, <8 x float> undef, <8 x float> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16F32 = select <16 x i1> undef, <16 x float> undef, <16 x float> undef -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; SSE2-LABEL: 'test_select_fp' +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %F64 = select i1 undef, double undef, double undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V2F64 = select <2 x i1> undef, <2 x double> undef, <2 x double> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V4F64 = select <4 x i1> undef, <4 x double> undef, <4 x double> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 12 for instruction: %V8F64 = select <8 x i1> undef, <8 x double> undef, <8 x double> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %F32 = select i1 undef, float undef, float undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V4F32 = select <4 x i1> undef, <4 x float> undef, <4 x float> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V8F32 = select <8 x i1> undef, <8 x float> undef, <8 x float> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 12 for instruction: %V16F32 = select <16 x i1> undef, <16 x float> undef, <16 x float> undef +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; SSE4-LABEL: 'test_select_fp' +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %F64 = select i1 undef, double undef, double undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V2F64 = select <2 x i1> undef, <2 x double> undef, <2 x double> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V4F64 = select <4 x i1> undef, <4 x double> undef, <4 x double> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V8F64 = select <8 x i1> undef, <8 x double> undef, <8 x double> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %F32 = select i1 undef, float undef, float undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V4F32 = select <4 x i1> undef, <4 x float> undef, <4 x float> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F32 = select <8 x i1> undef, <8 x float> undef, <8 x float> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 8 for instruction: %V16F32 = select <16 x i1> undef, <16 x float> undef, <16 x float> undef +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; AVX-LABEL: 'test_select_fp' +; AVX-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %F64 = select i1 undef, double undef, double undef +; AVX-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V2F64 = select <2 x i1> undef, <2 x double> undef, <2 x double> undef +; AVX-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V4F64 = select <4 x i1> undef, <4 x double> undef, <4 x double> undef +; AVX-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V8F64 = select <8 x i1> undef, <8 x double> undef, <8 x double> undef +; AVX-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %F32 = select i1 undef, float undef, float undef +; AVX-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V4F32 = select <4 x i1> undef, <4 x float> undef, <4 x float> undef +; AVX-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %V8F32 = select <8 x i1> undef, <8 x float> undef, <8 x float> undef +; AVX-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %V16F32 = select <16 x i1> undef, <16 x float> undef, <16 x float> undef +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; AVX512-LABEL: 'test_select_fp' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F64 = select i1 undef, double undef, double undef +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V2F64 = select <2 x i1> undef, <2 x double> undef, <2 x double> undef +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F64 = select <4 x i1> undef, <4 x double> undef, <4 x double> undef +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F64 = select <8 x i1> undef, <8 x double> undef, <8 x double> undef +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %F32 = select i1 undef, float undef, float undef +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V4F32 = select <4 x i1> undef, <4 x float> undef, <4 x float> undef +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V8F32 = select <8 x i1> undef, <8 x float> undef, <8 x float> undef +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %V16F32 = select <16 x i1> undef, <16 x float> undef, <16 x float> undef +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef +; +; SLM-LABEL: 'test_select_fp' +; SLM-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %F64 = select i1 undef, double undef, double undef +; SLM-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V2F64 = select <2 x i1> undef, <2 x double> undef, <2 x double> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V4F64 = select <4 x i1> undef, <4 x double> undef, <4 x double> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 12 for instruction: %V8F64 = select <8 x i1> undef, <8 x double> undef, <8 x double> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %F32 = select i1 undef, float undef, float undef +; SLM-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %V4F32 = select <4 x i1> undef, <4 x float> undef, <4 x float> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %V8F32 = select <8 x i1> undef, <8 x float> undef, <8 x float> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 12 for instruction: %V16F32 = select <16 x i1> undef, <16 x float> undef, <16 x float> undef +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret i32 undef ; %F64 = select i1 undef, double undef, double undef %V2F64 = select <2 x i1> undef, <2 x double> undef, <2 x double> undef @@ -84,45 +242,125 @@ ; Integers of the same size should also use those instructions. define <2 x i64> @test_2i64(<2 x i64> %a, <2 x i64> %b) { -; CHECK-LABEL: 'test_2i64' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <2 x i1> , <2 x i64> %a, <2 x i64> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x i64> %sel +; SSE2-LABEL: 'test_2i64' +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <2 x i1> , <2 x i64> %a, <2 x i64> %b +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x i64> %sel +; +; SSE4-LABEL: 'test_2i64' +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <2 x i1> , <2 x i64> %a, <2 x i64> %b +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x i64> %sel +; +; AVX-LABEL: 'test_2i64' +; AVX-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <2 x i1> , <2 x i64> %a, <2 x i64> %b +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x i64> %sel +; +; AVX512-LABEL: 'test_2i64' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <2 x i1> , <2 x i64> %a, <2 x i64> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x i64> %sel +; +; SLM-LABEL: 'test_2i64' +; SLM-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <2 x i1> , <2 x i64> %a, <2 x i64> %b +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x i64> %sel ; %sel = select <2 x i1> , <2 x i64> %a, <2 x i64> %b ret <2 x i64> %sel } define <2 x double> @test_2double(<2 x double> %a, <2 x double> %b) { -; CHECK-LABEL: 'test_2double' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <2 x i1> , <2 x double> %a, <2 x double> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x double> %sel +; SSE2-LABEL: 'test_2double' +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <2 x i1> , <2 x double> %a, <2 x double> %b +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x double> %sel +; +; SSE4-LABEL: 'test_2double' +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <2 x i1> , <2 x double> %a, <2 x double> %b +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x double> %sel +; +; AVX-LABEL: 'test_2double' +; AVX-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <2 x i1> , <2 x double> %a, <2 x double> %b +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x double> %sel +; +; AVX512-LABEL: 'test_2double' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <2 x i1> , <2 x double> %a, <2 x double> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x double> %sel +; +; SLM-LABEL: 'test_2double' +; SLM-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <2 x i1> , <2 x double> %a, <2 x double> %b +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <2 x double> %sel ; %sel = select <2 x i1> , <2 x double> %a, <2 x double> %b ret <2 x double> %sel } define <4 x i32> @test_4i32(<4 x i32> %a, <4 x i32> %b) { -; CHECK-LABEL: 'test_4i32' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x i32> %a, <4 x i32> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i32> %sel +; SSE2-LABEL: 'test_4i32' +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <4 x i1> , <4 x i32> %a, <4 x i32> %b +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i32> %sel +; +; SSE4-LABEL: 'test_4i32' +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <4 x i1> , <4 x i32> %a, <4 x i32> %b +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i32> %sel +; +; AVX-LABEL: 'test_4i32' +; AVX-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <4 x i1> , <4 x i32> %a, <4 x i32> %b +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i32> %sel +; +; AVX512-LABEL: 'test_4i32' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x i32> %a, <4 x i32> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i32> %sel +; +; SLM-LABEL: 'test_4i32' +; SLM-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <4 x i1> , <4 x i32> %a, <4 x i32> %b +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i32> %sel ; %sel = select <4 x i1> , <4 x i32> %a, <4 x i32> %b ret <4 x i32> %sel } define <4 x float> @test_4float(<4 x float> %a, <4 x float> %b) { -; CHECK-LABEL: 'test_4float' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x float> %a, <4 x float> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x float> %sel +; SSE2-LABEL: 'test_4float' +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <4 x i1> , <4 x float> %a, <4 x float> %b +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x float> %sel +; +; SSE4-LABEL: 'test_4float' +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <4 x i1> , <4 x float> %a, <4 x float> %b +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x float> %sel +; +; AVX-LABEL: 'test_4float' +; AVX-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <4 x i1> , <4 x float> %a, <4 x float> %b +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x float> %sel +; +; AVX512-LABEL: 'test_4float' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x float> %a, <4 x float> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x float> %sel +; +; SLM-LABEL: 'test_4float' +; SLM-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <4 x i1> , <4 x float> %a, <4 x float> %b +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x float> %sel ; %sel = select <4 x i1> , <4 x float> %a, <4 x float> %b ret <4 x float> %sel } define <16 x i8> @test_16i8(<16 x i8> %a, <16 x i8> %b) { -; CHECK-LABEL: 'test_16i8' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <16 x i1> , <16 x i8> %a, <16 x i8> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i8> %sel +; SSE2-LABEL: 'test_16i8' +; SSE2-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <16 x i1> , <16 x i8> %a, <16 x i8> %b +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i8> %sel +; +; SSE4-LABEL: 'test_16i8' +; SSE4-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <16 x i1> , <16 x i8> %a, <16 x i8> %b +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i8> %sel +; +; AVX-LABEL: 'test_16i8' +; AVX-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <16 x i1> , <16 x i8> %a, <16 x i8> %b +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i8> %sel +; +; AVX512-LABEL: 'test_16i8' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <16 x i1> , <16 x i8> %a, <16 x i8> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i8> %sel +; +; SLM-LABEL: 'test_16i8' +; SLM-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <16 x i1> , <16 x i8> %a, <16 x i8> %b +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i8> %sel ; %sel = select <16 x i1> , <16 x i8> %a, <16 x i8> %b ret <16 x i8> %sel @@ -132,54 +370,158 @@ ; Integers of the same size should also use those instructions. define <4 x i64> @test_4i64(<4 x i64> %a, <4 x i64> %b) { -; CHECK-LABEL: 'test_4i64' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x i64> %a, <4 x i64> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i64> %sel +; SSE2-LABEL: 'test_4i64' +; SSE2-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %sel = select <4 x i1> , <4 x i64> %a, <4 x i64> %b +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i64> %sel +; +; SSE4-LABEL: 'test_4i64' +; SSE4-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %sel = select <4 x i1> , <4 x i64> %a, <4 x i64> %b +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i64> %sel +; +; AVX-LABEL: 'test_4i64' +; AVX-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <4 x i1> , <4 x i64> %a, <4 x i64> %b +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i64> %sel +; +; AVX512-LABEL: 'test_4i64' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x i64> %a, <4 x i64> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i64> %sel +; +; SLM-LABEL: 'test_4i64' +; SLM-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %sel = select <4 x i1> , <4 x i64> %a, <4 x i64> %b +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x i64> %sel ; %sel = select <4 x i1> , <4 x i64> %a, <4 x i64> %b ret <4 x i64> %sel } define <4 x double> @test_4double(<4 x double> %a, <4 x double> %b) { -; CHECK-LABEL: 'test_4double' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x double> %a, <4 x double> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x double> %sel +; SSE2-LABEL: 'test_4double' +; SSE2-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %sel = select <4 x i1> , <4 x double> %a, <4 x double> %b +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x double> %sel +; +; SSE4-LABEL: 'test_4double' +; SSE4-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %sel = select <4 x i1> , <4 x double> %a, <4 x double> %b +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x double> %sel +; +; AVX-LABEL: 'test_4double' +; AVX-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <4 x i1> , <4 x double> %a, <4 x double> %b +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x double> %sel +; +; AVX512-LABEL: 'test_4double' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <4 x i1> , <4 x double> %a, <4 x double> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x double> %sel +; +; SLM-LABEL: 'test_4double' +; SLM-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %sel = select <4 x i1> , <4 x double> %a, <4 x double> %b +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <4 x double> %sel ; %sel = select <4 x i1> , <4 x double> %a, <4 x double> %b ret <4 x double> %sel } define <8 x i32> @test_8i32(<8 x i32> %a, <8 x i32> %b) { -; CHECK-LABEL: 'test_8i32' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <8 x i1> , <8 x i32> %a, <8 x i32> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x i32> %sel +; SSE2-LABEL: 'test_8i32' +; SSE2-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %sel = select <8 x i1> , <8 x i32> %a, <8 x i32> %b +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x i32> %sel +; +; SSE4-LABEL: 'test_8i32' +; SSE4-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %sel = select <8 x i1> , <8 x i32> %a, <8 x i32> %b +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x i32> %sel +; +; AVX-LABEL: 'test_8i32' +; AVX-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <8 x i1> , <8 x i32> %a, <8 x i32> %b +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x i32> %sel +; +; AVX512-LABEL: 'test_8i32' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <8 x i1> , <8 x i32> %a, <8 x i32> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x i32> %sel +; +; SLM-LABEL: 'test_8i32' +; SLM-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %sel = select <8 x i1> , <8 x i32> %a, <8 x i32> %b +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x i32> %sel ; %sel = select <8 x i1> , <8 x i32> %a, <8 x i32> %b ret <8 x i32> %sel } define <8 x float> @test_8float(<8 x float> %a, <8 x float> %b) { -; CHECK-LABEL: 'test_8float' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <8 x i1> , <8 x float> %a, <8 x float> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x float> %sel +; SSE2-LABEL: 'test_8float' +; SSE2-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %sel = select <8 x i1> , <8 x float> %a, <8 x float> %b +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x float> %sel +; +; SSE4-LABEL: 'test_8float' +; SSE4-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %sel = select <8 x i1> , <8 x float> %a, <8 x float> %b +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x float> %sel +; +; AVX-LABEL: 'test_8float' +; AVX-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <8 x i1> , <8 x float> %a, <8 x float> %b +; AVX-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x float> %sel +; +; AVX512-LABEL: 'test_8float' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <8 x i1> , <8 x float> %a, <8 x float> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x float> %sel +; +; SLM-LABEL: 'test_8float' +; SLM-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %sel = select <8 x i1> , <8 x float> %a, <8 x float> %b +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <8 x float> %sel ; %sel = select <8 x i1> , <8 x float> %a, <8 x float> %b ret <8 x float> %sel } define <16 x i16> @test_16i16(<16 x i16> %a, <16 x i16> %b) { -; CHECK-LABEL: 'test_16i16' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <16 x i1> , <16 x i16> %a, <16 x i16> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i16> %sel +; SSE2-LABEL: 'test_16i16' +; SSE2-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %sel = select <16 x i1> , <16 x i16> %a, <16 x i16> %b +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i16> %sel +; +; SSE4-LABEL: 'test_16i16' +; SSE4-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %sel = select <16 x i1> , <16 x i16> %a, <16 x i16> %b +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i16> %sel +; +; AVX1-LABEL: 'test_16i16' +; AVX1-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <16 x i1> , <16 x i16> %a, <16 x i16> %b +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i16> %sel +; +; AVX2-LABEL: 'test_16i16' +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <16 x i1> , <16 x i16> %a, <16 x i16> %b +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i16> %sel +; +; AVX512-LABEL: 'test_16i16' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <16 x i1> , <16 x i16> %a, <16 x i16> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i16> %sel +; +; SLM-LABEL: 'test_16i16' +; SLM-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %sel = select <16 x i1> , <16 x i16> %a, <16 x i16> %b +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <16 x i16> %sel ; %sel = select <16 x i1> , <16 x i16> %a, <16 x i16> %b ret <16 x i16> %sel } define <32 x i8> @test_32i8(<32 x i8> %a, <32 x i8> %b) { -; CHECK-LABEL: 'test_32i8' -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <32 x i1> , <32 x i8> %a, <32 x i8> %b -; CHECK-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <32 x i8> %sel +; SSE2-LABEL: 'test_32i8' +; SSE2-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %sel = select <32 x i1> , <32 x i8> %a, <32 x i8> %b +; SSE2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <32 x i8> %sel +; +; SSE4-LABEL: 'test_32i8' +; SSE4-NEXT: Cost Model: Found an estimated cost of 4 for instruction: %sel = select <32 x i1> , <32 x i8> %a, <32 x i8> %b +; SSE4-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <32 x i8> %sel +; +; AVX1-LABEL: 'test_32i8' +; AVX1-NEXT: Cost Model: Found an estimated cost of 3 for instruction: %sel = select <32 x i1> , <32 x i8> %a, <32 x i8> %b +; AVX1-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <32 x i8> %sel +; +; AVX2-LABEL: 'test_32i8' +; AVX2-NEXT: Cost Model: Found an estimated cost of 2 for instruction: %sel = select <32 x i1> , <32 x i8> %a, <32 x i8> %b +; AVX2-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <32 x i8> %sel +; +; AVX512-LABEL: 'test_32i8' +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: %sel = select <32 x i1> , <32 x i8> %a, <32 x i8> %b +; AVX512-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <32 x i8> %sel +; +; SLM-LABEL: 'test_32i8' +; SLM-NEXT: Cost Model: Found an estimated cost of 6 for instruction: %sel = select <32 x i1> , <32 x i8> %a, <32 x i8> %b +; SLM-NEXT: Cost Model: Found an estimated cost of 1 for instruction: ret <32 x i8> %sel ; %sel = select <32 x i1> , <32 x i8> %a, <32 x i8> %b ret <32 x i8> %sel