diff --git a/mlir/include/mlir/Dialect/Tosa/IR/TosaOps.td b/mlir/include/mlir/Dialect/Tosa/IR/TosaOps.td
--- a/mlir/include/mlir/Dialect/Tosa/IR/TosaOps.td
+++ b/mlir/include/mlir/Dialect/Tosa/IR/TosaOps.td
@@ -1602,19 +1602,18 @@
 
   let description = [{
     Resizes a tensor. Resize is only allowed in the H and W dimensions. In
-    expected use, stride_y is approximately (IH<<shift)/OH and stride_x is
-    approximately (IW<<shift)/OW.  OH and OW are also supplied as inputs since
-    there may be off by one errors if calculating OH and OW from the strides.
+    expected use, The height dimension is scaled by factor (scale_y_n/scale_y_d).
+    And the width dimension is scaled by factor (scale_x_n/scale_x_d). Thus the
+    output dimensions can be derived from the input dimensions by inverting the
+    scale. And the [order_y, border_x] values adjust the output size to allow
+    fractional sampling beyond integer input position (IH-1,IW-1).
   }];
 
   let arguments = (ins
     Tosa_Tensor4D:$input,
-    Tosa_IntArrayAttr2:$output_size,
-    Tosa_IntArrayAttr2:$stride,
+    Tosa_IntArrayAttr4:$scale,
     Tosa_IntArrayAttr2:$offset,
-    I32Attr:$shift,
-    Tosa_Fp32ArrayAttr2:$stride_fp,
-    Tosa_Fp32ArrayAttr2:$offset_fp,
+    Tosa_IntArrayAttr2:$border,
     Tosa_ResizeTypeAttr:$mode
   );
 
diff --git a/mlir/lib/Conversion/TosaToLinalg/TosaToLinalg.cpp b/mlir/lib/Conversion/TosaToLinalg/TosaToLinalg.cpp
--- a/mlir/lib/Conversion/TosaToLinalg/TosaToLinalg.cpp
+++ b/mlir/lib/Conversion/TosaToLinalg/TosaToLinalg.cpp
@@ -1357,47 +1357,65 @@
     Value inX =
         rewriter.create<arith::IndexCastOp>(loc, rewriter.getI32Type(), x);
 
-    int32_t shift = op.getShift();
-    bool floatingPointMode = shift == 0;
-
-    Value yStride, xStride, yOffset, xOffset;
-    if (floatingPointMode) {
-      yStride = rewriter.create<arith::ConstantOp>(loc, op.getStrideFp()[0]);
-      xStride = rewriter.create<arith::ConstantOp>(loc, op.getStrideFp()[1]);
-      yOffset = rewriter.create<arith::ConstantOp>(loc, op.getOffsetFp()[0]);
-      xOffset = rewriter.create<arith::ConstantOp>(loc, op.getOffsetFp()[1]);
-    } else {
-      SmallVector<int32_t> stride, offset;
-      getValuesFromIntArrayAttribute(op.getStride(), stride);
-      getValuesFromIntArrayAttribute(op.getOffset(), offset);
-
-      yStride = rewriter.create<arith::ConstantOp>(
-          loc, rewriter.getI32IntegerAttr(stride[0]));
-      xStride = rewriter.create<arith::ConstantOp>(
-          loc, rewriter.getI32IntegerAttr(stride[1]));
-      yOffset = rewriter.create<arith::ConstantOp>(
-          loc, rewriter.getI32IntegerAttr(offset[0]));
-      xOffset = rewriter.create<arith::ConstantOp>(
-          loc, rewriter.getI32IntegerAttr(offset[1]));
-    }
+    bool floatingPointMode = resultElementTy.isF32();
+
+    Value yScaleN, yScaleD, xScaleN, xScaleD, yOffset, xOffset, yBorder,
+        xBorder;
+    SmallVector<int32_t> scale, offset, border;
+    getValuesFromIntArrayAttribute(op.getScale(), scale);
+    getValuesFromIntArrayAttribute(op.getOffset(), offset);
+    getValuesFromIntArrayAttribute(op.getBorder(), border);
+
+    yScaleN = rewriter.create<arith::ConstantOp>(
+        loc, rewriter.getI32IntegerAttr(scale[0]));
+    yScaleD = rewriter.create<arith::ConstantOp>(
+        loc, rewriter.getI32IntegerAttr(scale[1]));
+    xScaleN = rewriter.create<arith::ConstantOp>(
+        loc, rewriter.getI32IntegerAttr(scale[2]));
+    xScaleD = rewriter.create<arith::ConstantOp>(
+        loc, rewriter.getI32IntegerAttr(scale[3]));
+    yOffset = rewriter.create<arith::ConstantOp>(
+        loc, rewriter.getI32IntegerAttr(offset[0]));
+    xOffset = rewriter.create<arith::ConstantOp>(
+        loc, rewriter.getI32IntegerAttr(offset[1]));
+    yBorder = rewriter.create<arith::ConstantOp>(
+        loc, rewriter.getI32IntegerAttr(border[0]));
+    xBorder = rewriter.create<arith::ConstantOp>(
+        loc, rewriter.getI32IntegerAttr(border[1]));
 
     // Compute the the integer index and partial offset.
-    // x = x * stride + offset;
-    // ix = floor(x)
-    // dx = x - ix
     Value ix, iy, dx, dy;
+    // x = x * scale_d + offset;
+    // ix = floor(x / scale_n)
     if (floatingPointMode) {
+      // dx = x / scale_n - ix
       Value y =
           rewriter.create<arith::UIToFPOp>(loc, rewriter.getF32Type(), inY);
       Value x =
           rewriter.create<arith::UIToFPOp>(loc, rewriter.getF32Type(), inX);
 
-      y = rewriter.create<arith::MulFOp>(loc, y, yStride);
-      x = rewriter.create<arith::MulFOp>(loc, x, xStride);
+      yScaleN =
+          rewriter.create<arith::UIToFPOp>(loc, rewriter.getF32Type(), yScaleN);
+      yScaleD =
+          rewriter.create<arith::UIToFPOp>(loc, rewriter.getF32Type(), yScaleD);
+      xScaleN =
+          rewriter.create<arith::UIToFPOp>(loc, rewriter.getF32Type(), xScaleN);
+      xScaleD =
+          rewriter.create<arith::UIToFPOp>(loc, rewriter.getF32Type(), xScaleD);
+      yOffset =
+          rewriter.create<arith::UIToFPOp>(loc, rewriter.getF32Type(), yOffset);
+      xOffset =
+          rewriter.create<arith::UIToFPOp>(loc, rewriter.getF32Type(), xOffset);
+
+      y = rewriter.create<arith::MulFOp>(loc, y, yScaleD);
+      x = rewriter.create<arith::MulFOp>(loc, x, xScaleD);
 
       y = rewriter.create<arith::AddFOp>(loc, y, yOffset);
       x = rewriter.create<arith::AddFOp>(loc, x, xOffset);
 
+      y = rewriter.create<arith::DivFOp>(loc, y, yScaleN);
+      x = rewriter.create<arith::DivFOp>(loc, x, xScaleN);
+
       iy = rewriter.create<math::FloorOp>(loc, y);
       ix = rewriter.create<math::FloorOp>(loc, x);
 
@@ -1407,27 +1425,30 @@
       iy = rewriter.create<arith::FPToSIOp>(loc, rewriter.getI32Type(), iy);
       ix = rewriter.create<arith::FPToSIOp>(loc, rewriter.getI32Type(), ix);
     } else {
-      Value shiftVal = rewriter.create<arith::ConstantOp>(
-          loc, rewriter.getI32IntegerAttr(shift));
-
-      Value y = rewriter.create<arith::MulIOp>(loc, inY, yStride);
-      Value x = rewriter.create<arith::MulIOp>(loc, inX, xStride);
+      //  dx = x - ix * scale_n;
+      Value y = rewriter.create<arith::MulIOp>(loc, inY, yScaleD);
+      Value x = rewriter.create<arith::MulIOp>(loc, inX, xScaleD);
 
       y = rewriter.create<arith::AddIOp>(loc, y, yOffset);
       x = rewriter.create<arith::AddIOp>(loc, x, xOffset);
 
-      iy = rewriter.create<arith::ShRSIOp>(loc, y, shiftVal);
-      ix = rewriter.create<arith::ShRSIOp>(loc, x, shiftVal);
+      iy = rewriter.create<arith::DivUIOp>(loc, y, yScaleN);
+      ix = rewriter.create<arith::DivUIOp>(loc, x, xScaleN);
 
-      Value yTrunc = rewriter.create<arith::ShLIOp>(loc, iy, shiftVal);
-      Value xTrunc = rewriter.create<arith::ShLIOp>(loc, ix, shiftVal);
+      Value temp_y = rewriter.create<arith::MulIOp>(loc, iy, yScaleN);
+      Value temp_x = rewriter.create<arith::MulIOp>(loc, ix, xScaleN);
 
-      dy = rewriter.create<arith::SubIOp>(loc, y, yTrunc);
-      dx = rewriter.create<arith::SubIOp>(loc, x, xTrunc);
+      dy = rewriter.create<arith::SubIOp>(loc, y, temp_y);
+      dx = rewriter.create<arith::SubIOp>(loc, x, temp_x);
     }
 
     if (op.getMode() == "NEAREST_NEIGHBOR") {
       Value yPred, xPred;
+      auto zeroVal = rewriter.create<arith::ConstantOp>(
+          loc, rewriter.getI32IntegerAttr(0));
+      auto oneVal = rewriter.create<arith::ConstantOp>(
+          loc, rewriter.getI32IntegerAttr(1));
+
       // Round the index position towards the closest pixel location.
       if (floatingPointMode) {
         auto halfVal = rewriter.create<arith::ConstantOp>(
@@ -1437,19 +1458,16 @@
         xPred = rewriter.create<arith::CmpFOp>(loc, arith::CmpFPredicate::OGE,
                                                dx, halfVal);
       } else {
-        auto halfVal = rewriter.create<arith::ConstantOp>(
-            loc, rewriter.getI32IntegerAttr(1 << (shift - 1)));
+        Value yScaleNHalfVal =
+            rewriter.create<arith::ShRSIOp>(loc, yScaleN, oneVal);
+        Value xScaleNHalfVal =
+            rewriter.create<arith::ShRSIOp>(loc, xScaleN, oneVal);
         yPred = rewriter.create<arith::CmpIOp>(loc, arith::CmpIPredicate::sge,
-                                               dy, halfVal);
+                                               dy, yScaleNHalfVal);
         xPred = rewriter.create<arith::CmpIOp>(loc, arith::CmpIPredicate::sge,
-                                               dx, halfVal);
+                                               dx, xScaleNHalfVal);
       }
 
-      auto zeroVal = rewriter.create<arith::ConstantOp>(
-          loc, rewriter.getI32IntegerAttr(0));
-      auto oneVal = rewriter.create<arith::ConstantOp>(
-          loc, rewriter.getI32IntegerAttr(1));
-
       auto yOffset =
           rewriter.create<arith::SelectOp>(loc, yPred, oneVal, zeroVal);
       auto xOffset =
@@ -1475,9 +1493,8 @@
       rewriter.create<linalg::YieldOp>(loc, result);
 
       return success();
-    }
-
-    if (op.getMode() == "BILINEAR") {
+    } else {
+      // The mode here must be BILINEAR. This has been checked above.
       Value y0 = iy;
       Value x0 = ix;
 
@@ -1511,10 +1528,8 @@
           loc, input, ValueRange{batch, y1, x1, channel});
 
       if (floatingPointMode) {
-        auto oneVal = rewriter.create<arith::ConstantOp>(
-            loc, rewriter.getF32FloatAttr(1.f));
         Value rightPart = dx;
-        Value leftPart = rewriter.create<arith::SubFOp>(loc, oneVal, dx);
+        Value leftPart = rewriter.create<arith::SubFOp>(loc, xScaleN, dx);
 
         y0x0 = rewriter.create<arith::MulFOp>(loc, y0x0, leftPart);
         y0x1 = rewriter.create<arith::MulFOp>(loc, y0x1, rightPart);
@@ -1525,46 +1540,46 @@
         Value bottomAcc = rewriter.create<arith::AddFOp>(loc, y1x0, y1x1);
 
         Value bottomPart = dy;
-        Value topPart = rewriter.create<arith::SubFOp>(loc, oneVal, dy);
+        Value topPart = rewriter.create<arith::SubFOp>(loc, yScaleN, dy);
         topAcc = rewriter.create<arith::MulFOp>(loc, topAcc, topPart);
         bottomAcc = rewriter.create<arith::MulFOp>(loc, bottomAcc, bottomPart);
         Value result = rewriter.create<arith::AddFOp>(loc, topAcc, bottomAcc);
 
         rewriter.create<linalg::YieldOp>(loc, result);
         return success();
-      }
-      y0x0 = rewriter.create<arith::ExtSIOp>(loc, resultElementTy, y0x0);
-      y0x1 = rewriter.create<arith::ExtSIOp>(loc, resultElementTy, y0x1);
-      y1x0 = rewriter.create<arith::ExtSIOp>(loc, resultElementTy, y1x0);
-      y1x1 = rewriter.create<arith::ExtSIOp>(loc, resultElementTy, y1x1);
-
-      if (resultElementTy.getIntOrFloatBitWidth() > 32) {
-        dx = rewriter.create<arith::ExtSIOp>(loc, resultElementTy, dx);
-        dy = rewriter.create<arith::ExtSIOp>(loc, resultElementTy, dy);
-      }
+      } else {
+        y0x0 = rewriter.create<arith::ExtSIOp>(loc, resultElementTy, y0x0);
+        y0x1 = rewriter.create<arith::ExtSIOp>(loc, resultElementTy, y0x1);
+        y1x0 = rewriter.create<arith::ExtSIOp>(loc, resultElementTy, y1x0);
+        y1x1 = rewriter.create<arith::ExtSIOp>(loc, resultElementTy, y1x1);
+
+        if (resultElementTy.getIntOrFloatBitWidth() > 32) {
+          dx = rewriter.create<arith::ExtSIOp>(loc, resultElementTy, dx);
+          dy = rewriter.create<arith::ExtSIOp>(loc, resultElementTy, dy);
+        }
 
-      auto unitVal = rewriter.create<arith::ConstantOp>(
-          loc, rewriter.getIntegerAttr(resultElementTy, 1LL << shift));
-      Value rightPart = dx;
-      Value leftPart = rewriter.create<arith::SubIOp>(loc, unitVal, dx);
+        Value rightPart = dx;
+        Value leftPart = rewriter.create<arith::SubIOp>(loc, xScaleN, dx);
 
-      y0x0 = rewriter.create<arith::MulIOp>(loc, y0x0, leftPart);
-      y0x1 = rewriter.create<arith::MulIOp>(loc, y0x1, rightPart);
-      Value topAcc = rewriter.create<arith::AddIOp>(loc, y0x0, y0x1);
+        y0x0 = rewriter.create<arith::MulIOp>(loc, y0x0, leftPart);
+        y0x1 = rewriter.create<arith::MulIOp>(loc, y0x1, rightPart);
+        Value topAcc = rewriter.create<arith::AddIOp>(loc, y0x0, y0x1);
 
-      y1x0 = rewriter.create<arith::MulIOp>(loc, y1x0, leftPart);
-      y1x1 = rewriter.create<arith::MulIOp>(loc, y1x1, rightPart);
-      Value bottomAcc = rewriter.create<arith::AddIOp>(loc, y1x0, y1x1);
+        y1x0 = rewriter.create<arith::MulIOp>(loc, y1x0, leftPart);
+        y1x1 = rewriter.create<arith::MulIOp>(loc, y1x1, rightPart);
+        Value bottomAcc = rewriter.create<arith::AddIOp>(loc, y1x0, y1x1);
 
-      Value bottomPart = dy;
-      Value topPart = rewriter.create<arith::SubIOp>(loc, unitVal, dy);
-      topAcc = rewriter.create<arith::MulIOp>(loc, topAcc, topPart);
-      bottomAcc = rewriter.create<arith::MulIOp>(loc, bottomAcc, bottomPart);
-      Value result = rewriter.create<arith::AddIOp>(loc, topAcc, bottomAcc);
+        Value bottomPart = dy;
+        Value topPart = rewriter.create<arith::SubIOp>(loc, yScaleN, dy);
+        topAcc = rewriter.create<arith::MulIOp>(loc, topAcc, topPart);
+        bottomAcc = rewriter.create<arith::MulIOp>(loc, bottomAcc, bottomPart);
+        Value result = rewriter.create<arith::AddIOp>(loc, topAcc, bottomAcc);
 
-      rewriter.create<linalg::YieldOp>(loc, result);
-      return success();
+        rewriter.create<linalg::YieldOp>(loc, result);
+        return success();
+      }
     }
+
     return failure();
   }
 };
diff --git a/mlir/lib/Dialect/Tosa/IR/TosaOps.cpp b/mlir/lib/Dialect/Tosa/IR/TosaOps.cpp
--- a/mlir/lib/Dialect/Tosa/IR/TosaOps.cpp
+++ b/mlir/lib/Dialect/Tosa/IR/TosaOps.cpp
@@ -812,52 +812,24 @@
     inWidth = inputShape.getDimSize(2);
   }
 
-  int32_t shift = adaptor.getShift();
-  llvm::SmallVector<int64_t> newShape;
-  getI64Values(adaptor.getOutputSize(), newShape);
-  outputShape[1] = newShape[0];
-  outputShape[2] = newShape[1];
-
-  llvm::SmallVector<int64_t> strideInt;
+  llvm::SmallVector<int64_t> scaleInt;
   llvm::SmallVector<int64_t> offsetInt;
-  llvm::SmallVector<double> strideFp;
-  llvm::SmallVector<double> offsetFp;
+  llvm::SmallVector<int64_t> borderInt;
+  getI64Values(adaptor.getScale(), scaleInt);
   getI64Values(adaptor.getOffset(), offsetInt);
-  getF64Values(adaptor.getOffsetFp(), offsetFp);
-  getI64Values(adaptor.getStride(), strideInt);
-  getF64Values(adaptor.getStrideFp(), strideFp);
-
-  // If we have a 0 zero in integers we know that the resize indexing needs to
-  // be performed in floating point. Use the floating point varient to compute
-  // the resize shape.
-  bool fpMode = strideInt[0] == 0;
-
-  // We can compute the output shape if attribute specifies unknown dimensions
-  // based on the offset and stride. If we perfectly line up to the last index
-  // we need to round up the size to include it.
-  if (outputShape[1] == ShapedType::kDynamicSize && inHeight >= 0 && fpMode) {
-    float sizeFp = (inHeight - offsetFp[0] - 1) / strideFp[0];
-    float round = std::floor(sizeFp) == sizeFp ? 1 : 0;
-    outputShape[1] = std::ceil(sizeFp) + round;
-  }
-
-  if (outputShape[2] == ShapedType::kDynamicSize && inWidth >= 0 && fpMode) {
-    float sizeFp = (inWidth - offsetFp[1] - 1) / strideFp[1];
-    float round = std::floor(sizeFp) == sizeFp ? 1 : 0;
-    outputShape[2] = std::ceil(sizeFp) + round;
-  }
-
-  if (outputShape[1] == ShapedType::kDynamicSize && inHeight >= 0 && !fpMode) {
-    int64_t size = (inHeight - 1);
-    size = ((size << shift) - offsetInt[0]) / strideInt[0];
-    outputShape[1] = size + 1;
-  }
-
-  if (outputShape[2] == ShapedType::kDynamicSize && inWidth >= 0 && !fpMode) {
-    int64_t size = (inWidth - 1);
-    size = ((size << shift) - offsetInt[1]) / strideInt[1];
-    outputShape[2] = size + 1;
-  }
+  getI64Values(adaptor.getBorder(), borderInt);
+
+  // We can compute the output shape based on the attributes: scale, offset, and
+  // border.
+  outputShape[1] =
+      (((inHeight - 1) * scaleInt[0] - offsetInt[0] + borderInt[0]) /
+       scaleInt[1]) +
+      1;
+
+  outputShape[2] =
+      (((inWidth - 1) * scaleInt[2] - offsetInt[1] + borderInt[1]) /
+       scaleInt[3]) +
+      1;
 
   inferredReturnShapes.push_back(ShapedTypeComponents(outputShape));
   return success();
diff --git a/mlir/test/Conversion/TosaToLinalg/tosa-to-linalg.mlir b/mlir/test/Conversion/TosaToLinalg/tosa-to-linalg.mlir
--- a/mlir/test/Conversion/TosaToLinalg/tosa-to-linalg.mlir
+++ b/mlir/test/Conversion/TosaToLinalg/tosa-to-linalg.mlir
@@ -1542,123 +1542,141 @@
 
 // -----
 
-// CHECK-LABEL: @resize_nearest
-func.func @resize_nearest(%input: tensor<1x2x2x1xf32>) -> () {
-  // CHECK: %[[INIT:.+]] = linalg.init_tensor [1, 4, 4, 1]
+// CHECK-LABEL:  @resize_nearest_int
+func.func @resize_nearest_int(%arg0: tensor<1x15x13x1xi8>) -> () {
+  // CHECK: %[[INIT:.+]] = linalg.init_tensor [1, 23, 179, 1]
   // CHECK: %[[GENERIC:.+]] = linalg.generic
-  // CHECK: %[[IDX0:.+]] = linalg.index 0
-  // CHECK: %[[IDX1:.+]] = linalg.index 1
-  // CHECK: %[[IDX2:.+]] = linalg.index 2
-  // CHECK: %[[IDX3:.+]] = linalg.index 3
-  // CHECK-DAG: %[[XYMIN:.+]] = arith.constant 0
-  // CHECK-DAG: %[[YMAX:.+]] = arith.constant 1
-  // CHECK-DAG: %[[XMAX:.+]] = arith.constant 1
-  // CHECK-DAG: %[[Y:.+]] = arith.index_cast %[[IDX1]]
-  // CHECK-DAG: %[[X:.+]] = arith.index_cast %[[IDX2]]
-  // CHECK-DAG: %[[STRIDEY:.+]] = arith.constant 5.000000e-01
-  // CHECK-DAG: %[[STRIDEX:.+]] = arith.constant 5.000000e-01
-  // CHECK-DAG: %[[OFFSETY:.+]] = arith.constant 1.000000e-01
-  // CHECK-DAG: %[[OFFSETX:.+]] = arith.constant 2.000000e-01
-  // CHECK-DAG: %[[VAL4:.+]] = arith.uitofp %[[Y]]
-  // CHECK-DAG: %[[VAL5:.+]] = arith.uitofp %[[X]]
-  // CHECK-DAG: %[[VAL6:.+]] = arith.mulf %[[VAL4]], %[[STRIDEY]]
-  // CHECK-DAG: %[[VAL7:.+]] = arith.mulf %[[VAL5]], %[[STRIDEX]]
-  // CHECK-DAG: %[[VAL8:.+]] = arith.addf %[[VAL6]], %[[OFFSETY]]
-  // CHECK-DAG: %[[VAL9:.+]] = arith.addf %[[VAL7]], %[[OFFSETX]]
-
-  // Find the remainder and integer component of the target index.
-
-  // CHECK-DAG: %[[VAL10:.+]] = math.floor %[[VAL8]]
-  // CHECK-DAG: %[[VAL11:.+]] = math.floor %[[VAL9]]
-  // CHECK-DAG: %[[VAL12:.+]] = arith.subf %[[VAL8]], %[[VAL10]]
-  // CHECK-DAG: %[[VAL13:.+]] = arith.subf %[[VAL9]], %[[VAL11]]
-  // CHECK-DAG: %[[VAL14:.+]] = arith.fptosi %[[VAL10]]
-  // CHECK-DAG: %[[VAL15:.+]] = arith.fptosi %[[VAL11]]
-
-  // Round to the nearest index.
-
-  // CHECK-DAG: %[[ROUND:.+]] = arith.constant 5.000000e-01
-  // CHECK-DAG: %[[VAL16:.+]] = arith.cmpf oge, %[[VAL12]], %[[ROUND]]
-  // CHECK-DAG: %[[VAL17:.+]] = arith.cmpf oge, %[[VAL13]], %[[ROUND]]
-  // CHECK-DAG: %[[ZERO:.+]] = arith.constant 0
-  // CHECK-DAG: %[[ONE:.+]] = arith.constant 1
-  // CHECK-DAG: %[[VAL18:.+]] = arith.select %[[VAL16]], %[[ONE]], %[[ZERO]]
-  // CHECK-DAG: %[[VAL19:.+]] = arith.select %[[VAL17]], %[[ONE]], %[[ZERO]]
-  // CHECK-DAG: %[[VAL20:.+]] = arith.addi %[[VAL14]], %[[VAL18]]
-  // CHECK-DAG: %[[VAL21:.+]] = arith.addi %[[VAL15]], %[[VAL19]]
+  // CHECK: %[[IDX_0:.+]] = linalg.index 0
+  // CHECK: %[[IDX_1:.+]] = linalg.index 1
+  // CHECK: %[[IDX_2:.+]] = linalg.index 2
+  // CHECK: %[[IDX_3:.+]] = linalg.index 3
+  // CHECK: %[[XY_MIN:.+]] = arith.constant 0
+  // CHECK: %[[Y_MAX:.+]] = arith.constant 14
+  // CHECK: %[[X_MAX:.+]] = arith.constant 12
+
+  // CHECK: %[[Y:.+]] = arith.index_cast %[[IDX_1]]
+  // CHECK: %[[X:.+]] = arith.index_cast %[[IDX_2]]
+  // CHECK: %[[SCALE_Y_N:.*]] = arith.constant 11
+  // CHECK: %[[SCALE_Y_D:.*]] = arith.constant 7
+  // CHECK: %[[SCALE_X_N:.*]] = arith.constant 89
+  // CHECK: %[[SCALE_X_D:.*]] = arith.constant 6
+  // CHECK: %[[OFFSET_Y:.*]] = arith.constant 0
+  // CHECK: %[[OFFSET_X:.*]] = arith.constant 0
+  // CHECK: %[[BORDER_Y:.*]] = arith.constant 0
+  // CHECK: %[[BORDER_X:.*]] = arith.constant 0
+
+  // find the remainder and integer component of the target index.
+
+  // CHECK: %[[TEMP_Y:.*]] = arith.muli %[[Y]], %[[SCALE_Y_D]]
+  // CHECK: %[[TEMP_X:.*]] = arith.muli %[[X]], %[[SCALE_X_D]]
+  // CHECK: %[[Y:.*]] = arith.addi %[[TEMP_Y]], %[[OFFSET_Y]]
+  // CHECK: %[[X:.*]] = arith.addi %[[TEMP_X]], %[[OFFSET_X]]
+  // CHECK: %[[I_Y:.*]] = arith.divui %[[Y]], %[[SCALE_Y_N]]
+  // CHECK: %[[I_X:.*]] = arith.divui %[[X]], %[[SCALE_X_N]]
+  // CHECK: %[[TEMP_Y:.*]] = arith.muli %[[I_Y]], %[[SCALE_Y_N]]
+  // CHECK: %[[TEMP_X:.*]] = arith.muli %[[I_X]], %[[SCALE_X_N]]
+  // CHECK: %[[D_Y:.*]] = arith.subi %[[Y]], %[[TEMP_Y]]
+  // CHECK: %[[D_X:.*]] = arith.subi %[[X]], %[[TEMP_X]]
+
+  // Round to the nearest neighor.
+
+  // CHECK: %[[ZERO:.*]] = arith.constant 0
+  // CHECK: %[[ONE:.*]] = arith.constant 1
+  // CHECK: %[[SCALE_Y_N_HALF:.*]] = arith.shrsi %[[SCALE_Y_N]], %[[ONE]]
+  // CHECK: %[[SCALE_X_N_HALF:.*]] = arith.shrsi %[[SCALE_X_N]], %[[ONE]]
+  // CHECK: %[[PRED_Y:.*]] = arith.cmpi sge, %[[D_Y]], %[[SCALE_Y_N_HALF]]
+  // CHECK: %[[PRED_X:.*]] = arith.cmpi sge, %[[D_X]], %[[SCALE_X_N_HALF]]
+  // CHECK: %[[VAL_37:.*]] = arith.select %[[PRED_Y]], %[[ONE]], %[[ZERO]]
+  // CHECK: %[[VAL_38:.*]] = arith.select %[[PRED_X]], %[[ONE]], %[[ZERO]]
+  // CHECK: %[[VAL_39:.*]] = arith.addi %[[I_Y]], %[[VAL_37]]
+  // CHECK: %[[VAL_40:.*]] = arith.addi %[[I_X]], %[[VAL_38]]
 
   // This section applies bound checking to be within the input image.
 
-  // CHECK-DAG: %[[VAL22:.+]] = arith.cmpi slt, %[[VAL20]], %[[XYMIN]]
-  // CHECK-DAG: %[[VAL23:.+]] = arith.select %[[VAL22]], %[[XYMIN]], %[[VAL20]]
-  // CHECK-DAG: %[[VAL24:.+]] = arith.cmpi slt, %[[YMAX]], %[[VAL20]]
-  // CHECK-DAG: %[[VAL25:.+]] = arith.select %[[VAL24]], %[[YMAX]], %[[VAL23]]
-  // CHECK-DAG: %[[VAL26:.+]] = arith.cmpi slt, %[[VAL21]], %[[XYMIN]]
-  // CHECK-DAG: %[[VAL27:.+]] = arith.select %[[VAL26]], %[[XYMIN]], %[[VAL21]]
-  // CHECK-DAG: %[[VAL28:.+]] = arith.cmpi slt, %[[XMAX]], %[[VAL21]]
-  // CHECK-DAG: %[[VAL29:.+]] = arith.select %[[VAL28]], %[[XMAX]], %[[VAL27]]
+  // CHECK: %[[VAL_41:.*]] = arith.cmpi slt, %[[VAL_39]], %[[XY_MIN]]
+  // CHECK: %[[VAL_42:.*]] = arith.select %[[VAL_41]], %[[XY_MIN]], %[[VAL_39]]
+  // CHECK: %[[VAL_43:.*]] = arith.cmpi slt, %[[Y_MAX]], %[[VAL_39]]
+  // CHECK: %[[VAL_44:.*]] = arith.select %[[VAL_43]], %[[Y_MAX]], %[[VAL_42]]
+  // CHECK: %[[VAL_45:.*]] = arith.cmpi slt, %[[VAL_40]], %[[XY_MIN]]
+  // CHECK: %[[VAL_46:.*]] = arith.select %[[VAL_45]], %[[XY_MIN]], %[[VAL_40]]
+  // CHECK: %[[VAL_47:.*]] = arith.cmpi slt, %[[X_MAX]], %[[VAL_40]]
+  // CHECK: %[[VAL_48:.*]] = arith.select %[[VAL_47]], %[[X_MAX]], %[[VAL_46]]
 
   // Extract the nearest value using the computed indices.
 
-  // CHECK-DAG: %[[IDY:.+]] = arith.index_cast %[[VAL25]]
-  // CHECK-DAG: %[[IDX:.+]] = arith.index_cast %[[VAL29]]
-  // CHECK-DAG: %[[EXTRACT:.+]] = tensor.extract %arg0[%[[IDX0]], %[[IDY]], %[[IDX]], %[[IDX3]]]
+  // CHECK: %[[IDY:.+]] = arith.index_cast %[[VAL_44]]
+  // CHECK: %[[IDX:.+]] = arith.index_cast %[[VAL_48]]
+  // CHECK: %[[EXTRACT:.+]] = tensor.extract %arg0[%[[IDX_0]], %[[IDY]], %[[IDX]], %[[IDX_3]]]
   // CHECK: linalg.yield %[[EXTRACT]]
-  %output = "tosa.resize"(%input) { output_size = [4, 4], stride = [0, 0], offset = [0, 0], stride_fp = [0.5 : f32, 0.5 : f32], offset_fp = [0.1 : f32, 0.2 : f32], shift = 0 : i32, mode = "NEAREST_NEIGHBOR" } : (tensor<1x2x2x1xf32>)  -> (tensor<1x4x4x1xf32>)
 
-  return
+  // Round to the nearest index.
+  %0 = "tosa.resize"(%arg0) {mode = "NEAREST_NEIGHBOR", scale = [11, 7, 89, 6], offset = [0, 0], border = [0, 0]} : (tensor<1x15x13x1xi8>) -> tensor<1x23x179x1xi8>
+           return
 }
 
 // -----
 
-// CHECK-LABEL: @resize_bilinear
-func.func @resize_bilinear(%input: tensor<1x2x2x1xf32>) -> () {
-  // CHECK: %[[INIT:.+]] = linalg.init_tensor [1, 4, 4, 1]
+// CHECK-LABEL:  @resize_bilinear_int
+func.func @resize_bilinear_int(%arg0: tensor<1x19x19x1xi8>) {
+  // CHECK: %[[INIT:.+]] = linalg.init_tensor [1, 289, 289, 1]
   // CHECK: %[[GENERIC:.+]] = linalg.generic
-  // CHECK: %[[IDX0:.+]] = linalg.index 0
-  // CHECK: %[[IDX1:.+]] = linalg.index 1
-  // CHECK: %[[IDX2:.+]] = linalg.index 2
-  // CHECK: %[[IDX3:.+]] = linalg.index 3
-  // CHECK: %[[XYMIN:.+]] = arith.constant 0
-  // CHECK: %[[YMAX:.+]] = arith.constant 1
-  // CHECK: %[[XMAX:.+]] = arith.constant 1
-
-  // CHECK: %[[VAL10:.+]] = math.floor %[[VAL8:.+]]
-  // CHECK: %[[VAL11:.+]] = math.floor %[[VAL9:.+]]
-
-  // CHECK: %[[DY:.+]] = arith.subf %[[VAL8:.+]], %[[VAL10]]
-  // CHECK: %[[DX:.+]] = arith.subf %[[VAL9:.+]], %[[VAL11]]
-
-  // CHECK: %[[Y0:.+]] = arith.fptosi %[[VAL10]]
-  // CHECK: %[[X0:.+]] = arith.fptosi %[[VAL11]]
+  // CHECK: ^bb0(%arg1: i32):
+  // CHECK: %[[IDX_0:.+]] = linalg.index 0
+  // CHECK: %[[IDX_1:.+]] = linalg.index 1
+  // CHECK: %[[IDX_2:.+]] = linalg.index 2
+  // CHECK: %[[IDX_3:.+]] = linalg.index 3
+  // CHECK: %[[XY_MIN:.+]] = arith.constant 0
+  // CHECK: %[[Y_MAX:.+]] = arith.constant 18
+  // CHECK: %[[X_MAX:.+]] = arith.constant 18
+  // CHECK: %[[Y:.+]] = arith.index_cast %[[IDX_1]]
+  // CHECK: %[[X:.+]] = arith.index_cast %[[IDX_2]]
+  // CHECK: %[[SCALE_Y_N:.*]] = arith.constant 16
+  // CHECK: %[[SCALE_Y_D:.*]] = arith.constant 1
+  // CHECK: %[[SCALE_X_N:.*]] = arith.constant 16
+  // CHECK: %[[SCALE_X_D:.*]] = arith.constant 1
+  // CHECK: %[[OFFSET_Y:.*]] = arith.constant 0
+  // CHECK: %[[OFFSET_X:.*]] = arith.constant 0
+  // CHECK: %[[BORDER_Y:.*]] = arith.constant 0
+  // CHECK: %[[BORDER_X:.*]] = arith.constant 0
+
+  // CHECK: %[[TEMP_Y:.*]] = arith.muli %[[Y]], %[[SCALE_Y_D]]
+  // CHECK: %[[TEMP_X:.*]] = arith.muli %[[X]], %[[SCALE_X_D]]
+  // CHECK: %[[Y:.*]] = arith.addi %[[TEMP_Y]], %[[OFFSET_Y]]
+  // CHECK: %[[X:.*]] = arith.addi %[[TEMP_X]], %[[OFFSET_X]]
+  // CHECK: %[[I_Y:.*]] = arith.divui %[[Y]], %[[SCALE_Y_N]]
+  // CHECK: %[[I_X:.*]] = arith.divui %[[X]], %[[SCALE_X_N]]
+  // CHECK: %[[TEMP_Y:.*]] = arith.muli %[[I_Y]], %[[SCALE_Y_N]]
+  // CHECK: %[[TEMP_X:.*]] = arith.muli %[[I_X]], %[[SCALE_X_N]]
+  // CHECK: %[[D_Y:.*]] = arith.subi %[[Y]], %[[TEMP_Y]]
+  // CHECK: %[[D_X:.*]] = arith.subi %[[X]], %[[TEMP_X]]
 
   // Compute the left, right, and top indices for the bilinear interpolation.
 
-  // CHECK: %[[ONE:.+]] = arith.constant 1
-  // CHECK: %[[Y1:.+]] = arith.addi %[[Y0]], %[[ONE]]
-  // CHECK: %[[X1:.+]] = arith.addi %[[X0]], %[[ONE]]
+  // CHECK: %[[ONE:.*]] = arith.constant 1
+  // CHECK: %[[Y1:.*]] = arith.addi %[[I_Y]], %[[ONE]]
+  // CHECK: %[[X1:.*]] = arith.addi %[[I_X]], %[[ONE]]
 
   // Bound check each dimension.
 
-  // CHECK: %[[PRED:.+]] = arith.cmpi slt, %[[Y0]], %[[XYMIN]]
-  // CHECK: %[[BOUND:.+]] = arith.select %[[PRED]], %[[XYMIN]], %[[Y0]]
-  // CHECK: %[[PRED:.+]] = arith.cmpi slt, %[[YMAX]], %[[Y0]]
-  // CHECK: %[[YLO:.+]] = arith.select %[[PRED]], %[[YMAX]], %[[BOUND]]
+  // CHECK: %[[PRED:.*]] = arith.cmpi slt, %[[I_Y]], %[[XY_MIN]]
+  // CHECK: %[[BOUND:.*]] = arith.select %[[PRED]], %[[XY_MIN]], %[[I_Y]]
+  // CHECK: %[[PRED:.*]] = arith.cmpi slt, %[[Y_MAX]], %[[I_Y]]
+  // CHECK: %[[YLO:.*]] = arith.select %[[PRED]], %[[Y_MAX]], %[[BOUND]]
 
-  // CHECK: %[[PRED:.+]] = arith.cmpi slt, %[[Y1]], %[[XYMIN]]
-  // CHECK: %[[BOUND:.+]] = arith.select %[[PRED]], %[[XYMIN]], %[[Y1]]
-  // CHECK: %[[PRED:.+]] = arith.cmpi slt, %[[YMAX]], %[[Y1]]
-  // CHECK: %[[YHI:.+]] = arith.select %[[PRED]], %[[YMAX]], %[[BOUND]]
+  // CHECK: %[[PRED:.*]] = arith.cmpi slt, %[[Y1]], %[[XY_MIN]]
+  // CHECK: %[[BOUND:.*]] = arith.select %[[PRED]], %[[XY_MIN]], %[[Y1]]
+  // CHECK: %[[PRED:.*]] = arith.cmpi slt, %[[Y_MAX]], %[[Y1]]
+  // CHECK: %[[YHI:.*]] = arith.select %[[PRED]], %[[Y_MAX]], %[[BOUND]]
 
-  // CHECK: %[[PRED:.+]] = arith.cmpi slt, %[[X0]], %[[XYMIN]]
-  // CHECK: %[[BOUND:.+]] = arith.select %[[PRED]], %[[XYMIN]], %[[X0]]
-  // CHECK: %[[PRED:.+]] = arith.cmpi slt, %[[XMAX]], %[[X0]]
-  // CHECK: %[[XLO:.+]] = arith.select %[[PRED]], %[[XMAX]], %[[BOUND]]
+  // CHECK: %[[PRED:.*]] = arith.cmpi slt, %[[I_X]], %[[XY_MIN]]
+  // CHECK: %[[BOUND:.*]] = arith.select %[[PRED]], %[[XY_MIN]], %[[I_X]]
+  // CHECK: %[[PRED:.*]] = arith.cmpi slt, %[[X_MAX]], %[[I_X]]
+  // CHECK: %[[XLO:.*]] = arith.select %[[PRED]], %[[X_MAX]], %[[BOUND]]
 
-  // CHECK: %[[PRED:.+]] = arith.cmpi slt, %[[X1]], %[[XYMIN]]
-  // CHECK: %[[BOUND:.+]] = arith.select %[[PRED]], %[[XYMIN]], %[[X1]]
-  // CHECK: %[[PRED:.+]] = arith.cmpi slt, %[[XMAX]], %[[X1]]
-  // CHECK: %[[XHI:.+]] = arith.select %[[PRED]], %[[XMAX]], %[[BOUND]]
+  // CHECK: %[[PRED:.*]] = arith.cmpi slt, %[[X1]], %[[XY_MIN]]
+  // CHECK: %[[BOUND:.*]] = arith.select %[[PRED]], %[[XY_MIN]], %[[X1]]
+  // CHECK: %[[PRED:.*]] = arith.cmpi slt, %[[X_MAX]], %[[X1]]
+  // CHECK: %[[XHI:.*]] = arith.select %[[PRED]], %[[X_MAX]], %[[BOUND]]
 
   // Extract each corner of the bilinear interpolation.
 
@@ -1667,180 +1685,217 @@
   // CHECK: %[[XLOI:.+]] = arith.index_cast %[[XLO]]
   // CHECK: %[[XHII:.+]] = arith.index_cast %[[XHI]]
 
-  // CHECK: %[[LOLO:.+]] = tensor.extract %arg0[%[[IDX0]], %[[YLOI]], %[[XLOI]], %[[IDX3]]]
-  // CHECK: %[[LOHI:.+]] = tensor.extract %arg0[%[[IDX0]], %[[YLOI]], %[[XHII]], %[[IDX3]]]
-  // CHECK: %[[HILO:.+]] = tensor.extract %arg0[%[[IDX0]], %[[YHII]], %[[XLOI]], %[[IDX3]]]
-  // CHECK: %[[HIHI:.+]] = tensor.extract %arg0[%[[IDX0]], %[[YHII]], %[[XHII]], %[[IDX3]]]
+  // CHECK: %[[LOLO:.+]] = tensor.extract %arg0[%[[IDX_0]], %[[YLOI]], %[[XLOI]], %[[IDX_3]]]
+  // CHECK: %[[LOHI:.+]] = tensor.extract %arg0[%[[IDX_0]], %[[YLOI]], %[[XHII]], %[[IDX_3]]]
+  // CHECK: %[[HILO:.+]] = tensor.extract %arg0[%[[IDX_0]], %[[YHII]], %[[XLOI]], %[[IDX_3]]]
+  // CHECK: %[[HIHI:.+]] = tensor.extract %arg0[%[[IDX_0]], %[[YHII]], %[[XHII]], %[[IDX_3]]]
+
+  // CHECK: %[[XLOLO:.+]] = arith.extsi %[[LOLO]]
+  // CHECK: %[[XLOHI:.+]] = arith.extsi %[[LOHI]]
+  // CHECK: %[[XHILO:.+]] = arith.extsi %[[HILO]]
+  // CHECK: %[[XHIHI:.+]] = arith.extsi %[[HIHI]]
 
   // Compute the bilinear interpolation.
 
-  // CHECK: %[[ONE:.+]] = arith.constant 1.000000e+00
-  // CHECK: %[[NDX:.+]] = arith.subf %[[ONE]], %[[DX]]
-  // CHECK: %[[WLOLO:.+]] = arith.mulf %[[LOLO]], %[[NDX]]
-  // CHECK: %[[WLOHI:.+]] = arith.mulf %[[LOHI]], %[[DX]]
-  // CHECK: %[[LO:.+]] = arith.addf %[[WLOLO]], %[[WLOHI]]
-  // CHECK: %[[WHILO:.+]] = arith.mulf %[[HILO]], %[[NDX]]
-  // CHECK: %[[WHIHI:.+]] = arith.mulf %[[HIHI]], %[[DX]]
-  // CHECK: %[[HI:.+]] = arith.addf %[[WHILO]], %[[WHIHI]]
-  // CHECK: %[[NDY:.+]] = arith.subf %[[ONE]], %[[DY]]
-  // CHECK: %[[WLO:.+]] = arith.mulf %[[LO]], %[[NDY]]
-  // CHECK: %[[WHI:.+]] = arith.mulf %[[HI]], %[[DY]]
-  // CHECK: %[[RESULT:.+]] = arith.addf %[[WLO]], %[[WHI]]
+  // CHECK: %[[NDX:.+]] = arith.subi %[[SCALE_X_N]], %[[D_X]]
+  // CHECK: %[[WLOLO:.+]] = arith.muli %[[XLOLO]], %[[NDX]]
+  // CHECK: %[[WLOHI:.+]] = arith.muli %[[XLOHI]], %[[D_X]]
+  // CHECK: %[[LO:.+]] = arith.addi %[[WLOLO]], %[[WLOHI]]
+  // CHECK: %[[WHILO:.+]] = arith.muli %[[XHILO]], %[[NDX]]
+  // CHECK: %[[WHIHI:.+]] = arith.muli %[[XHIHI]], %[[D_X]]
+  // CHECK: %[[HI:.+]] = arith.addi %[[WHILO]], %[[WHIHI]]
+  // CHECK: %[[NDY:.+]] = arith.subi %[[SCALE_Y_N]], %[[D_Y]]
+  // CHECK: %[[WLO:.+]] = arith.muli %[[LO]], %[[NDY]]
+  // CHECK: %[[WHI:.+]] = arith.muli %[[HI]], %[[D_Y]]
+  // CHECK: %[[RESULT:.+]] = arith.addi %[[WLO]], %[[WHI]]
   // CHECK: linalg.yield %[[RESULT]]
-  %output = "tosa.resize"(%input) { output_size = [4, 4], stride = [0, 0], offset = [0, 0], stride_fp = [0.5 : f32, 0.5 : f32], offset_fp = [0.1 : f32, 0.2 : f32], shift = 0 : i32, mode = "BILINEAR" } : (tensor<1x2x2x1xf32>)  -> (tensor<1x4x4x1xf32>)
-  return
+
+  // Round to the nearest index.
+  %0 = "tosa.resize"(%arg0) {mode = "BILINEAR", scale = [16, 1, 16, 1], offset = [0, 0], border = [0, 0]} : (tensor<1x19x19x1xi8>) -> tensor<1x289x289x1xi32>
+           return
 }
 
 // -----
 
-// CHECK-LABEL: @resize_nearest_int
-func.func @resize_nearest_int(%input: tensor<1x2x2x1xi32>) -> () {
-  // CHECK: %[[INIT:.+]] = linalg.init_tensor [1, 4, 4, 1]
+// CHECK-LABEL: @resize_nearest_fp
+func.func @resize_nearest_fp(%input: tensor<1x50x48x1xf32>) -> () {
+  // CHECK: %[[INIT:.+]] = linalg.init_tensor [1, 1600, 1536, 1]
   // CHECK: %[[GENERIC:.+]] = linalg.generic
+  // CHECK: ^bb0(%arg1: f32):
   // CHECK: %[[IDX0:.+]] = linalg.index 0
   // CHECK: %[[IDX1:.+]] = linalg.index 1
   // CHECK: %[[IDX2:.+]] = linalg.index 2
   // CHECK: %[[IDX3:.+]] = linalg.index 3
-  // CHECK-DAG: %[[XYMIN:.+]] = arith.constant 0
-  // CHECK-DAG: %[[YMAX:.+]] = arith.constant 1
-  // CHECK-DAG: %[[XMAX:.+]] = arith.constant 1
-  // CHECK-DAG: %[[Y:.+]] = arith.index_cast %[[IDX1]]
-  // CHECK-DAG: %[[X:.+]] = arith.index_cast %[[IDX2]]
-  // CHECK-DAG: %[[STRIDEY:.+]] = arith.constant 128
-  // CHECK-DAG: %[[STRIDEX:.+]] = arith.constant 128
-  // CHECK-DAG: %[[OFFSETY:.+]] = arith.constant 1
-  // CHECK-DAG: %[[OFFSETX:.+]] = arith.constant 2
-  // CHECK-DAG: %[[EIGHT:.+]] = arith.constant 8
-  // CHECK-DAG: %[[VAL4:.+]] = arith.muli %[[Y]], %[[STRIDEY]]
-  // CHECK-DAG: %[[VAL5:.+]] = arith.muli %[[X]], %[[STRIDEX]]
-  // CHECK-DAG: %[[VAL6:.+]] = arith.addi %[[VAL4]], %[[OFFSETY]]
-  // CHECK-DAG: %[[VAL7:.+]] = arith.addi %[[VAL5]], %[[OFFSETX]]
+  // CHECK: %[[XYMIN:.*]] = arith.constant 0
+  // CHECK: %[[YMAX:.*]] = arith.constant 49
+  // CHECK: %[[XMAX:.*]] = arith.constant 47
+  // CHECK: %[[Y:.+]] = arith.index_cast %[[IDX1]]
+  // CHECK: %[[X:.+]] = arith.index_cast %[[IDX2]]
+  // CHECK: %[[ISCALE_Y_N:.*]] = arith.constant 64
+  // CHECK: %[[ISCALE_Y_D:.*]] = arith.constant 2
+  // CHECK: %[[ISCALE_X_N:.*]] = arith.constant 64
+  // CHECK: %[[ISCALE_X_D:.*]] = arith.constant 2
+  // CHECK: %[[IOFFSET_Y:.*]] = arith.constant -31
+  // CHECK: %[[IOFFSET_X:.*]] = arith.constant -31
+  // CHECK: %[[IBORDER_Y:.*]] = arith.constant 31
+  // CHECK: %[[IBORDER_X:.*]] = arith.constant 31
+
+  // CHECK: %[[Y0:.+]] = arith.uitofp %[[Y]]
+  // CHECK: %[[X0:.+]] = arith.uitofp %[[X]]
+  // CHECK: %[[SCALE_Y_N:.*]] = arith.uitofp %[[ISCALE_Y_N]]
+  // CHECK: %[[SCALE_Y_D:.*]] = arith.uitofp %[[ISCALE_Y_D]]
+  // CHECK: %[[SCALE_X_N:.*]] = arith.uitofp %[[ISCALE_X_N]]
+  // CHECK: %[[SCALE_X_D:.*]] = arith.uitofp %[[ISCALE_X_D]]
+  // CHECK: %[[OFFSET_Y:.*]] = arith.uitofp %[[IOFFSET_Y]]
+  // CHECK: %[[OFFSET_X:.*]] = arith.uitofp %[[IOFFSET_X]]
+
+  // CHECK: %[[VAL_29:.*]] = arith.mulf %[[Y0]], %[[SCALE_Y_D]]
+  // CHECK: %[[VAL_30:.*]] = arith.mulf %[[X0]], %[[SCALE_X_D]]
+  // CHECK: %[[VAL_31:.*]] = arith.addf %[[VAL_29]], %[[OFFSET_Y]]
+  // CHECK: %[[VAL_32:.*]] = arith.addf %[[VAL_30]], %[[OFFSET_X]]
+  // CHECK: %[[VAL_33:.*]] = arith.divf %[[VAL_31]], %[[SCALE_Y_N]]
+  // CHECK: %[[VAL_34:.*]] = arith.divf %[[VAL_32]], %[[SCALE_X_N]]
 
   // Find the remainder and integer component of the target index.
 
-
-  // CHECK-DAG: %[[VAL8:.+]] = arith.shrsi %[[VAL6]], %[[EIGHT]]
-  // CHECK-DAG: %[[VAL9:.+]] = arith.shrsi %[[VAL7]], %[[EIGHT]]
-  // CHECK-DAG: %[[VAL10:.+]] = arith.shli %[[VAL8]], %[[EIGHT]]
-  // CHECK-DAG: %[[VAL11:.+]] = arith.shli %[[VAL9]], %[[EIGHT]]
-  // CHECK-DAG: %[[VAL12:.+]] = arith.subi %[[VAL6]], %[[VAL10]]
-  // CHECK-DAG: %[[VAL13:.+]] = arith.subi %[[VAL7]], %[[VAL11]]
-
-  // Round to the nearest index.
-
-  // CHECK-DAG: %[[ROUND:.+]] = arith.constant 128
-  // CHECK-DAG: %[[VAL16:.+]] = arith.cmpi sge, %[[VAL12]], %[[ROUND]]
-  // CHECK-DAG: %[[VAL17:.+]] = arith.cmpi sge, %[[VAL13]], %[[ROUND]]
-  // CHECK-DAG: %[[ZERO:.+]] = arith.constant 0
-  // CHECK-DAG: %[[ONE:.+]] = arith.constant 1
-  // CHECK-DAG: %[[VAL18:.+]] = arith.select %[[VAL16]], %[[ONE]], %[[ZERO]]
-  // CHECK-DAG: %[[VAL19:.+]] = arith.select %[[VAL17]], %[[ONE]], %[[ZERO]]
-  // CHECK-DAG: %[[VAL20:.+]] = arith.addi %[[VAL8]], %[[VAL18]]
-  // CHECK-DAG: %[[VAL21:.+]] = arith.addi %[[VAL9]], %[[VAL19]]
-
-  // This section applies bound checking to be within the input image.
-
-  // CHECK-DAG: %[[VAL22:.+]] = arith.cmpi slt, %[[VAL20]], %[[XYMIN]]
-  // CHECK-DAG: %[[VAL23:.+]] = arith.select %[[VAL22]], %[[XYMIN]], %[[VAL20]]
-  // CHECK-DAG: %[[VAL24:.+]] = arith.cmpi slt, %[[YMAX]], %[[VAL20]]
-  // CHECK-DAG: %[[VAL25:.+]] = arith.select %[[VAL24]], %[[YMAX]], %[[VAL23]]
-  // CHECK-DAG: %[[VAL26:.+]] = arith.cmpi slt, %[[VAL21]], %[[XYMIN]]
-  // CHECK-DAG: %[[VAL27:.+]] = arith.select %[[VAL26]], %[[XYMIN]], %[[VAL21]]
-  // CHECK-DAG: %[[VAL28:.+]] = arith.cmpi slt, %[[XMAX]], %[[VAL21]]
-  // CHECK-DAG: %[[VAL29:.+]] = arith.select %[[VAL28]], %[[XMAX]], %[[VAL27]]
-
-  // Extract the nearest value using the computed indices.
-
-  // CHECK-DAG: %[[IDY:.+]] = arith.index_cast %[[VAL25]]
-  // CHECK-DAG: %[[IDX:.+]] = arith.index_cast %[[VAL29]]
+  // CHECK: %[[VAL_35:.*]] = math.floor %[[VAL_33]]
+  // CHECK: %[[VAL_36:.*]] = math.floor %[[VAL_34]]
+  // CHECK: %[[D_Y:.*]] = arith.subf %[[VAL_33]], %[[VAL_35]]
+  // CHECK: %[[D_X:.*]] = arith.subf %[[VAL_34]], %[[VAL_36]]
+  // CHECK: %[[VAL_39:.*]] = arith.fptosi %[[VAL_35]]
+  // CHECK: %[[VAL_40:.*]] = arith.fptosi %[[VAL_36]]
+
+  // CHECK: %[[ZERO:.*]] = arith.constant 0
+  // CHECK: %[[ONE:.*]] = arith.constant 1
+  // CHECK: %[[HALF:.*]] = arith.constant 5.000000e-01
+  // CHECK: %[[PRED_Y:.*]] = arith.cmpf oge, %[[D_Y]], %[[HALF]]
+  // CHECK: %[[PRED_X:.*]] = arith.cmpf oge, %[[D_X]], %[[HALF]]
+  // CHECK: %[[ROUND_Y:.*]] = arith.select %[[PRED_Y]], %[[ONE]], %[[ZERO]]
+  // CHECK: %[[ROUND_X:.*]] = arith.select %[[PRED_X]], %[[ONE]], %[[ZERO]]
+  // CHECK: %[[VAL_48:.*]] = arith.addi %[[VAL_39]], %[[ROUND_Y]]
+  // CHECK: %[[VAL_49:.*]] = arith.addi %[[VAL_40]], %[[ROUND_X]]
+
+  // CHECK: %[[VAL_50:.*]] = arith.cmpi slt, %[[VAL_48]], %[[XYMIN]]
+  // CHECK: %[[VAL_51:.*]] = arith.select %[[VAL_50]], %[[XYMIN]], %[[VAL_48]]
+  // CHECK: %[[VAL_52:.*]] = arith.cmpi slt, %[[YMAX]], %[[VAL_48]]
+  // CHECK: %[[VAL_53:.*]] = arith.select %[[VAL_52]], %[[YMAX]], %[[VAL_51]]
+  // CHECK: %[[VAL_54:.*]] = arith.cmpi slt, %[[VAL_49]], %[[XYMIN]]
+  // CHECK: %[[VAL_55:.*]] = arith.select %[[VAL_54]], %[[XYMIN]], %[[VAL_49]]
+  // CHECK: %[[VAL_56:.*]] = arith.cmpi slt, %[[XMAX]], %[[VAL_49]]
+  // CHECK: %[[VAL_57:.*]] = arith.select %[[VAL_56]], %[[XMAX]], %[[VAL_55]]
+
+  // CHECK: %[[IDY:.*]] = arith.index_cast %[[VAL_53]]
+  // CHECK: %[[IDX:.*]] = arith.index_cast %[[VAL_57]]
   // CHECK: %[[EXTRACT:.+]] = tensor.extract %arg0[%[[IDX0]], %[[IDY]], %[[IDX]], %[[IDX3]]]
   // CHECK: linalg.yield %[[EXTRACT]]
-  %output = "tosa.resize"(%input) { output_size = [4, 4], stride = [128, 128], offset = [1, 2], stride_fp = [0. : f32, 0. : f32], offset_fp = [0. : f32, 0. : f32], shift = 8 : i32, mode = "NEAREST_NEIGHBOR" } : (tensor<1x2x2x1xi32>)  -> (tensor<1x4x4x1xi32>)
+
+  %output = "tosa.resize"(%input) {mode = "NEAREST_NEIGHBOR", scale = [64, 2, 64, 2], offset = [-31, -31], border = [31, 31]} : (tensor<1x50x48x1xf32>) -> tensor<1x1600x1536x1xf32>
+
   return
 }
 
 // -----
 
-// CHECK-LABEL: @resize_bilinear_int
-func.func @resize_bilinear_int(%input: tensor<1x2x2x1xi8>) -> () {
-  // CHECK: %[[INIT:.+]] = linalg.init_tensor [1, 4, 4, 1]
+// CHECK-LABEL: @resize_bilinear_fp
+func.func @resize_bilinear_fp(%input: tensor<1x23x23x1xf32>) -> () {
+  // CHECK: %[[INIT:.+]] = linalg.init_tensor [1, 89, 89, 1]
   // CHECK: %[[GENERIC:.+]] = linalg.generic
-
-  // CHECK: %[[IDX0:.+]] = linalg.index 0
-  // CHECK: %[[IDX3:.+]] = linalg.index 3
-
-  // CHECK: %[[XYMIN:.+]] = arith.constant 0
-  // CHECK: %[[YMAX:.+]] = arith.constant 1
-  // CHECK: %[[XMAX:.+]] = arith.constant 1
-
-  // CHECK: %[[Y0:.+]] = arith.shrsi
-  // CHECK: %[[X0:.+]] = arith.shrsi
-  // CHECK: %[[ROUNDY:.+]] = arith.shli %[[Y0]]
-  // CHECK: %[[ROUNDX:.+]] = arith.shli %[[X0]]
-  // CHECK: %[[DY:.+]] = arith.subi %10, %[[ROUNDY]]
-  // CHECK: %[[DX:.+]] = arith.subi %11, %[[ROUNDX]]
+  // CHECK: ^bb0(%arg1: f32):
+  // CHECK: %[[IDX_0:.+]] = linalg.index 0
+  // CHECK: %[[IDX_1:.+]] = linalg.index 1
+  // CHECK: %[[IDX_2:.+]] = linalg.index 2
+  // CHECK: %[[IDX_3:.+]] = linalg.index 3
+  // CHECK: %[[XY_MIN:.*]] = arith.constant 0
+  // CHECK: %[[Y_MAX:.*]] = arith.constant 22
+  // CHECK: %[[X_MAX:.*]] = arith.constant 22
+  // CHECK: %[[Y:.+]] = arith.index_cast %[[IDX_1]]
+  // CHECK: %[[X:.+]] = arith.index_cast %[[IDX_2]]
+  // CHECK: %[[ISCALE_Y_N:.*]] = arith.constant 4
+  // CHECK: %[[ISCALE_Y_D:.*]] = arith.constant 1
+  // CHECK: %[[ISCALE_X_N:.*]] = arith.constant 4
+  // CHECK: %[[ISCALE_X_D:.*]] = arith.constant 1
+  // CHECK: %[[IOFFSET_Y:.*]] = arith.constant 0
+  // CHECK: %[[IOFFSET_X:.*]] = arith.constant 0
+  // CHECK: %[[IBORDER_Y:.*]] = arith.constant 0
+  // CHECK: %[[IBORDER_X:.*]] = arith.constant 0
+
+  // CHECK: %[[Y0:.+]] = arith.uitofp %[[Y]]
+  // CHECK: %[[X0:.+]] = arith.uitofp %[[X]]
+  // CHECK: %[[SCALE_Y_N:.*]] = arith.uitofp %[[ISCALE_Y_N]]
+  // CHECK: %[[SCALE_Y_D:.*]] = arith.uitofp %[[ISCALE_Y_D]]
+  // CHECK: %[[SCALE_X_N:.*]] = arith.uitofp %[[ISCALE_X_N]]
+  // CHECK: %[[SCALE_X_D:.*]] = arith.uitofp %[[ISCALE_X_D]]
+  // CHECK: %[[OFFSET_Y:.*]] = arith.uitofp %[[IOFFSET_Y]]
+  // CHECK: %[[OFFSET_X:.*]] = arith.uitofp %[[IOFFSET_X]]
+
+  // CHECK: %[[VAL_29:.*]] = arith.mulf %[[Y0]], %[[SCALE_Y_D]]
+  // CHECK: %[[VAL_30:.*]] = arith.mulf %[[X0]], %[[SCALE_X_D]]
+  // CHECK: %[[VAL_31:.*]] = arith.addf %[[VAL_29]], %[[OFFSET_Y]]
+  // CHECK: %[[VAL_32:.*]] = arith.addf %[[VAL_30]], %[[OFFSET_X]]
+  // CHECK: %[[VAL_33:.*]] = arith.divf %[[VAL_31]], %[[SCALE_Y_N]]
+  // CHECK: %[[VAL_34:.*]] = arith.divf %[[VAL_32]], %[[SCALE_X_N]]
+
+  // CHECK: %[[VAL_35:.*]] = math.floor %[[VAL_33]]
+  // CHECK: %[[VAL_36:.*]] = math.floor %[[VAL_34]]
+  // CHECK: %[[D_Y:.*]] = arith.subf %[[VAL_33]], %[[VAL_35]]
+  // CHECK: %[[D_X:.*]] = arith.subf %[[VAL_34]], %[[VAL_36]]
+  // CHECK: %[[I_Y:.*]] = arith.fptosi %[[VAL_35]]
+  // CHECK: %[[I_X:.*]] = arith.fptosi %[[VAL_36]]
 
   // Compute the left, right, and top indices for the bilinear interpolation.
 
-  // CHECK: %[[ONE:.+]] = arith.constant 1
-  // CHECK: %[[Y1:.+]] = arith.addi %[[Y0]], %[[ONE]]
-  // CHECK: %[[X1:.+]] = arith.addi %[[X0]], %[[ONE]]
+  // CHECK: %[[ONE:.*]] = arith.constant 1
+  // CHECK: %[[Y1:.*]] = arith.addi %[[I_Y]], %[[ONE]]
+  // CHECK: %[[X1:.*]] = arith.addi %[[I_X]], %[[ONE]]
 
   // Bound check each dimension.
 
-  // CHECK: %[[PRED:.+]] = arith.cmpi slt, %[[Y0]], %[[XYMIN]]
-  // CHECK: %[[BOUND:.+]] = arith.select %[[PRED]], %[[XYMIN]], %[[Y0]]
-  // CHECK: %[[PRED:.+]] = arith.cmpi slt, %[[YMAX]], %[[Y0]]
-  // CHECK: %[[YLO:.+]] = arith.select %[[PRED]], %[[YMAX]], %[[BOUND]]
+  // CHECK: %[[PRED:.*]] = arith.cmpi slt, %[[I_Y]], %[[XY_MIN]]
+  // CHECK: %[[BOUND:.*]] = arith.select %[[PRED]], %[[XY_MIN]], %[[I_Y]]
+  // CHECK: %[[PRED:.*]] = arith.cmpi slt, %[[Y_MAX]], %[[I_Y]]
+  // CHECK: %[[YLO:.*]] = arith.select %[[PRED]], %[[Y_MAX]], %[[BOUND]]
 
-  // CHECK: %[[PRED:.+]] = arith.cmpi slt, %[[Y1]], %[[XYMIN]]
-  // CHECK: %[[BOUND:.+]] = arith.select %[[PRED]], %[[XYMIN]], %[[Y1]]
-  // CHECK: %[[PRED:.+]] = arith.cmpi slt, %[[YMAX]], %[[Y1]]
-  // CHECK: %[[YHI:.+]] = arith.select %[[PRED]], %[[YMAX]], %[[BOUND]]
+  // CHECK: %[[PRED:.*]] = arith.cmpi slt, %[[Y1]], %[[XY_MIN]]
+  // CHECK: %[[BOUND:.*]] = arith.select %[[PRED]], %[[XY_MIN]], %[[Y1]]
+  // CHECK: %[[PRED:.*]] = arith.cmpi slt, %[[Y_MAX]], %[[Y1]]
+  // CHECK: %[[YHI:.*]] = arith.select %[[PRED]], %[[Y_MAX]], %[[BOUND]]
 
-  // CHECK: %[[PRED:.+]] = arith.cmpi slt, %[[X0]], %[[XYMIN]]
-  // CHECK: %[[BOUND:.+]] = arith.select %[[PRED]], %[[XYMIN]], %[[X0]]
-  // CHECK: %[[PRED:.+]] = arith.cmpi slt, %[[XMAX]], %[[X0]]
-  // CHECK: %[[XLO:.+]] = arith.select %[[PRED]], %[[XMAX]], %[[BOUND]]
+  // CHECK: %[[PRED:.*]] = arith.cmpi slt, %[[I_X]], %[[XY_MIN]]
+  // CHECK: %[[BOUND:.*]] = arith.select %[[PRED]], %[[XY_MIN]], %[[I_X]]
+  // CHECK: %[[PRED:.*]] = arith.cmpi slt, %[[X_MAX]], %[[I_X]]
+  // CHECK: %[[XLO:.*]] = arith.select %[[PRED]], %[[X_MAX]], %[[BOUND]]
 
-  // CHECK: %[[PRED:.+]] = arith.cmpi slt, %[[X1]], %[[XYMIN]]
-  // CHECK: %[[BOUND:.+]] = arith.select %[[PRED]], %[[XYMIN]], %[[X1]]
-  // CHECK: %[[PRED:.+]] = arith.cmpi slt, %[[XMAX]], %[[X1]]
-  // CHECK: %[[XHI:.+]] = arith.select %[[PRED]], %[[XMAX]], %[[BOUND]]
-
-  // Extract each corner of the bilinear interpolation.
+  // CHECK: %[[PRED:.*]] = arith.cmpi slt, %[[X1]], %[[XY_MIN]]
+  // CHECK: %[[BOUND:.*]] = arith.select %[[PRED]], %[[XY_MIN]], %[[X1]]
+  // CHECK: %[[PRED:.*]] = arith.cmpi slt, %[[X_MAX]], %[[X1]]
+  // CHECK: %[[XHI:.*]] = arith.select %[[PRED]], %[[X_MAX]], %[[BOUND]]
 
   // CHECK: %[[YLOI:.+]] = arith.index_cast %[[YLO]]
   // CHECK: %[[YHII:.+]] = arith.index_cast %[[YHI]]
   // CHECK: %[[XLOI:.+]] = arith.index_cast %[[XLO]]
   // CHECK: %[[XHII:.+]] = arith.index_cast %[[XHI]]
 
-  // CHECK: %[[LOLO:.+]] = tensor.extract %arg0[%[[IDX0]], %[[YLOI]], %[[XLOI]], %[[IDX3]]]
-  // CHECK: %[[LOHI:.+]] = tensor.extract %arg0[%[[IDX0]], %[[YLOI]], %[[XHII]], %[[IDX3]]]
-  // CHECK: %[[HILO:.+]] = tensor.extract %arg0[%[[IDX0]], %[[YHII]], %[[XLOI]], %[[IDX3]]]
-  // CHECK: %[[HIHI:.+]] = tensor.extract %arg0[%[[IDX0]], %[[YHII]], %[[XHII]], %[[IDX3]]]
+  // CHECK: %[[LOLO:.+]] = tensor.extract %arg0[%[[IDX_0]], %[[YLOI]], %[[XLOI]], %[[IDX_3]]]
+  // CHECK: %[[LOHI:.+]] = tensor.extract %arg0[%[[IDX_0]], %[[YLOI]], %[[XHII]], %[[IDX_3]]]
+  // CHECK: %[[HILO:.+]] = tensor.extract %arg0[%[[IDX_0]], %[[YHII]], %[[XLOI]], %[[IDX_3]]]
+  // CHECK: %[[HIHI:.+]] = tensor.extract %arg0[%[[IDX_0]], %[[YHII]], %[[XHII]], %[[IDX_3]]]
 
-  // CHECK: %[[XLOLO:.+]] = arith.extsi %[[LOLO]]
-  // CHECK: %[[XLOHI:.+]] = arith.extsi %[[LOHI]]
-  // CHECK: %[[XHILO:.+]] = arith.extsi %[[HILO]]
-  // CHECK: %[[XHIHI:.+]] = arith.extsi %[[HIHI]]
+  // CHECK: %[[NDX:.+]] = arith.subf %[[SCALE_X_N]], %[[D_X]]
+  // CHECK: %[[WLOLO:.+]] = arith.mulf %[[LOLO]], %[[NDX]]
+  // CHECK: %[[WLOHI:.+]] = arith.mulf %[[LOHI]], %[[D_X]]
+  // CHECK: %[[LO:.+]] = arith.addf %[[WLOLO]], %[[WLOHI]]
+  // CHECK: %[[WHILO:.+]] = arith.mulf %[[HILO]], %[[NDX]]
+  // CHECK: %[[WHIHI:.+]] = arith.mulf %[[HIHI]], %[[D_X]]
+  // CHECK: %[[HI:.+]] = arith.addf %[[WHILO]], %[[WHIHI]]
+  // CHECK: %[[NDY:.+]] = arith.subf %[[SCALE_Y_N]], %[[D_Y]]
+  // CHECK: %[[WLO:.+]] = arith.mulf %[[LO]], %[[NDY]]
+  // CHECK: %[[WHI:.+]] = arith.mulf %[[HI]], %[[D_Y]]
+  // CHECK: %[[RESULT:.+]] = arith.addf %[[WLO]], %[[WHI]]
+  // CHECK: linalg.yield %[[RESULT]]
 
-  // Compute the bilinear interpolation.
+  // Round by bilinear interpolation
+  %output = "tosa.resize"(%input) {mode = "BILINEAR", scale = [4, 1, 4, 1], offset = [0, 0], border = [0, 0]} : (tensor<1x23x23x1xf32>) -> tensor<1x89x89x1xf32>
 
-  // CHECK: %[[SCALE:.+]] = arith.constant 256
-  // CHECK: %[[NDX:.+]] = arith.subi %[[SCALE]], %[[DX]]
-  // CHECK: %[[WLOLO:.+]] = arith.muli %[[XLOLO]], %[[NDX]]
-  // CHECK: %[[WLOHI:.+]] = arith.muli %[[XLOHI]], %[[DX]]
-  // CHECK: %[[LO:.+]] = arith.addi %[[WLOLO]], %[[WLOHI]]
-  // CHECK: %[[WHILO:.+]] = arith.muli %[[XHILO]], %[[NDX]]
-  // CHECK: %[[WHIHI:.+]] = arith.muli %[[XHIHI]], %[[DX]]
-  // CHECK: %[[HI:.+]] = arith.addi %[[WHILO]], %[[WHIHI]]
-  // CHECK: %[[NDY:.+]] = arith.subi %[[SCALE]], %[[DY]]
-  // CHECK: %[[WLO:.+]] = arith.muli %[[LO]], %[[NDY]]
-  // CHECK: %[[WHI:.+]] = arith.muli %[[HI]], %[[DY]]
-  // CHECK: %[[RESULT:.+]] = arith.addi %[[WLO]], %[[WHI]]
-  // CHECK: linalg.yield %[[RESULT]]
-  %output = "tosa.resize"(%input) { output_size = [4, 4], stride = [128, 128], offset = [1, 2], stride_fp = [0. : f32, 0. : f32], offset_fp = [0. : f32, 0. : f32], shift = 8 : i32, mode = "BILINEAR" } : (tensor<1x2x2x1xi8>)  -> (tensor<1x4x4x1xi32>)
   return
 }
 
@@ -1848,10 +1903,10 @@
 
 // CHECK-LABEL: @resize_dyn
 func.func @resize_dyn(%input: tensor<?x2x2x1xi8>) -> () {
-    // CHECK: %[[C0:.+]] = arith.constant 0
+  // CHECK: %[[C0:.+]] = arith.constant 0
   // CHECK: %[[BATCH:.+]] = tensor.dim %arg0, %[[C0]]
   // CHECK: %[[INIT:.+]] = linalg.init_tensor [%[[BATCH]], 4, 4, 1]
   // CHECK: %[[GENERIC:.+]] = linalg.generic
-  %output = "tosa.resize"(%input) { output_size = [4, 4], stride = [128, 128], offset = [1, 2], stride_fp = [0. : f32, 0. : f32], offset_fp = [0. : f32, 0. : f32], shift = 8 : i32, mode = "BILINEAR" } : (tensor<?x2x2x1xi8>)  -> (tensor<?x4x4x1xi32>)
+  %output = "tosa.resize"(%input) { scale = [4, 2, 4, 2], offset = [-1, -1], border = [1, 1], mode = "BILINEAR" } : (tensor<?x2x2x1xi8>)  -> (tensor<?x4x4x1xi32>)
   return
 }
diff --git a/mlir/test/Dialect/Tosa/ops.mlir b/mlir/test/Dialect/Tosa/ops.mlir
--- a/mlir/test/Dialect/Tosa/ops.mlir
+++ b/mlir/test/Dialect/Tosa/ops.mlir
@@ -448,7 +448,7 @@
 // -----
 // CHECK-LABEL: resize
 func.func @test_resize(%arg0: tensor<1x32x32x8xf32>) -> tensor<1x64x64x8xf32> {
-  %1 = "tosa.resize"(%arg0) {output_size = [64, 64], stride = [1024, 1024], offset = [0, 0], shift = 10 : i32, stride_fp = [0.0 : f32, 0.0 : f32], offset_fp = [0.0 : f32, 0.0 : f32], mode = "BILINEAR"} : (tensor<1x32x32x8xf32>) -> tensor<1x64x64x8xf32>
+  %1 = "tosa.resize"(%arg0) { scale = [4, 2, 4, 2], offset = [-1, -1], border = [1, 1], mode = "BILINEAR"} : (tensor<1x32x32x8xf32>) -> tensor<1x64x64x8xf32>
   return %1 : tensor<1x64x64x8xf32>
 }
 
diff --git a/mlir/test/Dialect/Tosa/tosa-infer-shapes.mlir b/mlir/test/Dialect/Tosa/tosa-infer-shapes.mlir
--- a/mlir/test/Dialect/Tosa/tosa-infer-shapes.mlir
+++ b/mlir/test/Dialect/Tosa/tosa-infer-shapes.mlir
@@ -964,61 +964,71 @@
 
 // -----
 
-// CHECK-LABEL: @resize_output_size
-func.func @resize_output_size(%arg0: tensor<2x?x?x3xi32>) {
-  // CHECK: -> tensor<2x4x5x3xi32>
-  %0 = "tosa.resize"(%arg0) {mode = "NEAREST_NEIGHBOR", offset = [0, 1], offset_fp = [0.000000e+00 : f32, 0.000000e+00 : f32], output_size = [4, 5], shift = 8 : i32, stride = [1, 1], stride_fp = [0.000000e+00 : f32, 0.000000e+00 : f32]} : (tensor<2x?x?x3xi32>) -> tensor<?x?x?x?xi32>
+// CHECK-LABEL: @resize_int_horizontal
+func.func @resize_int_horizontal(%arg0: tensor<1x15x13x1xi8>) {
+  // CHECK: -> tensor<1x23x179x1xi8>
+  %0 = "tosa.resize"(%arg0) {mode = "NEAREST_NEIGHBOR", scale = [11, 7, 89, 6], offset = [0, 0], border = [0, 0]} : (tensor<1x15x13x1xi8>) -> tensor<?x?x?x?xi8>
   return
 }
 
 // -----
 
-// CHECK-LABEL: @resize_int_horizontal
-func.func @resize_int_horizontal(%arg0: tensor<1x2x4x1xi32>) {
-  // CHECK: -> tensor<1x2x7x1xi32>
-  %0 = "tosa.resize"(%arg0) {mode = "NEAREST_NEIGHBOR", offset = [0, 0], offset_fp = [0.000000e+00 : f32, 0.000000e+00 : f32], output_size = [-1, -1], shift = 8 : i32, stride = [256, 128], stride_fp = [0.000000e+00 : f32, 0.000000e+00 : f32]} : (tensor<1x2x4x1xi32>) -> tensor<?x?x?x?xi32>
+// CHECK-LABEL: @resize_int_vertical
+func.func @resize_int_vertical(%arg0: tensor<1x49x42x1xi16>) {
+  // CHECK: -> tensor<1x112x220x1xi16>
+  %0 = "tosa.resize"(%arg0) {mode = "NEAREST_NEIGHBOR", scale = [37, 16, 219, 41], offset = [0, 0], border = [0, 0]} : (tensor<1x49x42x1xi16>) -> tensor<?x?x?x?xi16>
   return
 }
 
 // -----
 
-// CHECK-LABEL: @resize_int_vertical
-func.func @resize_int_vertical(%arg0: tensor<1x2x4x1xi32>) {
-  // CHECK: -> tensor<1x3x4x1xi32>
-  %0 = "tosa.resize"(%arg0) {mode = "NEAREST_NEIGHBOR", offset = [0, 0], offset_fp = [0.000000e+00 : f32, 0.000000e+00 : f32], output_size = [-1, -1], shift = 8 : i32, stride = [128, 256], stride_fp = [0.000000e+00 : f32, 0.000000e+00 : f32]} : (tensor<1x2x4x1xi32>) -> tensor<?x?x?x?xi32>
+// CHECK-LABEL: @resize_int_power_of_two_upscale
+func.func @resize_int_power_of_two_upscale(%arg0: tensor<1x23x19x1xi8>) {
+  // CHECK: -> tensor<1x353x289x1xi32>
+  %0 = "tosa.resize"(%arg0) {mode = "BILINEAR", scale = [16, 1, 16, 1], offset = [0, 0], border = [0, 0]} : (tensor<1x23x19x1xi8>) -> tensor<?x?x?x?xi32>
   return
 }
 
 // -----
 
-// CHECK-LABEL: @resize_int_offsetted
-func.func @resize_int_offsetted(%arg0: tensor<1x2x4x1xi32>) {
-  // CHECK: -> tensor<1x4x6x1xi32>
-  %0 = "tosa.resize"(%arg0) {mode = "NEAREST_NEIGHBOR", offset = [64, 64], offset_fp = [0.000000e+00 : f32, 0.000000e+00 : f32], output_size = [-1, -1], shift = 8 : i32, stride = [64, 128], stride_fp = [0.000000e+00 : f32, 0.000000e+00 : f32]} : (tensor<1x2x4x1xi32>) -> tensor<?x?x?x?xi32>
+// CHECK-LABEL: @resize_int_power_of_two_upscale_offsetted
+func.func @resize_int_power_of_two_upscale_offsetted(%arg0: tensor<1x41x26x1xi16>) {
+  // CHECK: -> tensor<1x328x208x1xi48>
+  %0 = "tosa.resize"(%arg0) {mode = "BILINEAR", scale = [16, 2, 16, 2], offset = [-7, -7], border = [7, 7]} : (tensor<1x41x26x1xi16>) -> tensor<?x?x?x?xi48>
   return
 }
 
 // -----
-
 // CHECK-LABEL: @resize_fp_horizontal
-func.func @resize_fp_horizontal(%arg0: tensor<1x2x4x1xi32>) {
-  // CHECK: -> tensor<1x2x7x1xi32>
-  %0 = "tosa.resize"(%arg0) {mode = "NEAREST_NEIGHBOR", offset = [0, 0], offset_fp = [0.000000e+00 : f32, 0.000000e+00 : f32], output_size = [-1, -1], shift = 0 : i32, stride = [0, 0], stride_fp = [1.000000e+00 : f32, 5.000000e-01 : f32]} : (tensor<1x2x4x1xi32>) -> tensor<?x?x?x?xi32>
+func.func @resize_fp_horizontal(%arg0: tensor<1x50x48x1xf32>) {
+  // CHECK: -> tensor<1x106x85x1xf32>
+  %0 = "tosa.resize"(%arg0) {mode = "BILINEAR", scale = [15, 7, 84, 47], offset = [0, 0], border = [0, 0]} : (tensor<1x50x48x1xf32>) -> tensor<?x?x?x?xf32>
   return
 }
 
 // -----
-
 // CHECK-LABEL: @resize_fp_vertical
-func.func @resize_fp_vertical(%arg0: tensor<1x2x4x1xi32>) {
-  // CHECK: -> tensor<1x3x4x1xi32>
-  %0 = "tosa.resize"(%arg0) {mode = "NEAREST_NEIGHBOR", offset = [0, 0], offset_fp = [0.000000e+00 : f32, 0.000000e+00 : f32], output_size = [-1, -1], shift = 0 : i32, stride = [0, 0], stride_fp = [5.000000e-01 : f32, 1.000000e+00 : f32]} : (tensor<1x2x4x1xi32>) -> tensor<?x?x?x?xi32>
+func.func @resize_fp_vertical(%arg0: tensor<1x50x48x1xf32>) {
+  // CHECK: -> tensor<1x128x13x1xf32>
+  %0 = "tosa.resize"(%arg0) {mode = "NEAREST_NEIGHBOR", scale = [127, 49, 12, 47], offset = [0, 0], border = [0, 0]} : (tensor<1x50x48x1xf32>) -> tensor<?x?x?x?xf32>
+  return
+}
+
+// -----
+
+// CHECK-LABEL: @resize_fp_power_of_two_upscale
+func.func @resize_fp_power_of_two_upscale(%arg0: tensor<1x23x23x1xf32>) {
+  // CHECK: -> tensor<1x89x89x1xf32>
+  %0 = "tosa.resize"(%arg0) {mode = "BILINEAR", scale = [4, 1, 4, 1], offset = [0, 0], border = [0, 0]} : (tensor<1x23x23x1xf32>) -> tensor<?x?x?x?xf32>
   return
 }
-// CHECK-LABEL: @resize_fp_offsetted
-func.func @resize_fp_offsetted(%arg0: tensor<1x2x4x1xi32>) {
-  // CHECK: -> tensor<1x4x6x1xi32>
-  %0 = "tosa.resize"(%arg0) {mode = "NEAREST_NEIGHBOR", offset = [0, 0], offset_fp = [2.500000e-01 : f32, 2.500000e-01 : f32], output_size = [-1, -1], shift = 0 : i32, stride = [0, 0], stride_fp = [2.500000e-01 : f32, 5.000000e-01 : f32]} : (tensor<1x2x4x1xi32>) -> tensor<?x?x?x?xi32>
+
+// -----
+
+// CHECK-LABEL: @resize_fp_power_of_two_upscale_offsetted
+func.func @resize_fp_power_of_two_upscale_offsetted(%arg0: tensor<1x50x48x1xf32>) {
+  // CHECK: -> tensor<1x1600x1536x1xf32>
+  %0 = "tosa.resize"(%arg0) {mode = "NEAREST_NEIGHBOR", scale = [64, 2, 64, 2], offset = [-31, -31], border = [31, 31]} : (tensor<1x50x48x1xf32>) -> tensor<?x?x?x?xf32>
   return
 }